Fate and transport of per- and polyfluoroalkyl substances (PFASs) in the vadose zone

Competitive adsorption and diffusion of methane and vapor-phase per- and polyfluoroalkyl substances in montmorillonite nano pores: Environmental implications

Vapor-phase perfluoroalkyl and polyfluoroalkyl substances (PFASs), along with methane emissions from landfills has been key contributors of their atmospheric transport and global distribution. Given the persistence, bioaccumulation, and potential health risks associated with PFAS, understanding their transport behavior in landfill gas barrier is of paramount importance. To gain a deeper understanding of the adsorption and diffusion behavior of vapor-phase PFAS in unsaturated, montmorillonite-rich clay barriers, a molecular dynamics simulation was conducted. A 5-nm montmorillonite nanopore incorporating vapor-phase PFAS (Fluorotelomer alcohol, FTOH), methane, and water molecules was modeled considering the interactions between these species. The results indicate that the presence of methane within the montmorillonite system inhibits the diffusion of both water and FTOH. Additionally, methane competes with FTOH for sorption sites, particularly at low moisture content. At 5 % moisture content, the adsorption density peak of methane is 1.5 times greater than that of FTOH due to stronger van der Waals interactions between methane and montmorillonite. However, as moisture content increases, methane adsorption weakens and becomes more dispersed within the montmorillonite pores. In contrast, FTOH retains a distinct adsorption region at 20 % moisture content, exhibiting a density peak of 0.025 g/cm3 that shifts farther from the montmorillonite surface. At high moisture content, FTOH aggregates due to the hydrophobicity of its C-F tail. These findings provide critical insights into the environmental behavior of volatile PFASs and have important implications for the design and optimization of landfill gas barriers.

Fluorescent Sodium Alginate Hydrogel-Carbon Dots Sensor for Detecting Perfluorooctanoic Acid in Potable Water

Per- and polyfluoroalkyl substances (PFASs), especially perfluorooctanoic acid (PFOA), are emerging environmental and health concerns due to their persistence, resistance to degradation, and bioaccumulation. In this study, we developed a sensitive and selective detection platform based on a sodium alginate (SA) hydrogel modified with nitrogen and fluorinated carbon dots (N,F-CDs) to enhance the detection of PFOA in natural and engineered water systems. The SA hydrogel-N,F-CD composite exhibited strong fluorescence at 480 nm after optimization, achieving a detection limit as low as 0.001 ppt. The sensor was characterized by using Scanning Electron Microscopy (SEM), Fourier-Transform Infrared Spectroscopy (FT-IR), Powder X-ray Diffraction (PXRD), X-ray Photoelectron Spectroscopy (XPS), and zeta potential spectroscopy, revealing its structural integrity, functional groups, and the surface charge of the SA hydrogel-N,F-CDs network. Sensitivity assessments demonstrated a linear fluorescence response to PFOA concentrations ranging from 1 to 66 ppq. Selectivity tests confirmed the sensor's ability to distinguish PFOA from other perfluorinated compounds, with minimal interference from other substances. The practical applicability of the sensor was validated using spiked recovery experiments with tap water samples from various locations, achieving recovery rates between 94% and 106.6%. This sensor offers a reliable, efficient, and highly sensitive platform for the detection of PFAS, demonstrating its potential for real-world PFAS-monitoring applications.

A comparative analysis of PFAS in archive and fresh soil samples in England and implications for large-scale surveys

This research addresses a knowledge gap in the detectability, concentrations, and types of per and polyfluoroalkyl substances (PFAS) present in shallow soils in England, UK. While the water environment has been, and continues to be, the subject of significant testing and research for these chemicals, soils are still poorly understood. Estimates of anthropogenic background concentrations of PFAS helps with the assessment of potential contamination scenarios, setting benchmark levels and risk evaluation. This research comprised an assessment of the suitability of using archive soil samples to support contemporary samples to give a preliminary indication of anthropogenic background concentrations of PFAS in shallow soils in England. We retrieved 25 archive samples and collected nine contemporary samples from the same geographical location as their paired archive counterpart. Samples were analysed for 53 PFAS with limits of quantification between 0.1 and 0.5 μg/kg dry weight (dw). The results showed that archive samples contained lower concentrations (mean ∑PFAS-53, 1 μg/kg dw) than paired contemporary soil samples (mean ∑PFAS-53, 3 μg/kg dw). The concentrations reported by this study were similar to other surveys at international, national and regional scales. Our study showed that PFAS were detected in both archive and contemporary field samples. Contemporary field samples should be used as the primary sample type in future research on background concentrations of PFAS in soils. Archive samples have the potential provide complimentary temporal and compositional insights to support the derivation of background concentrations.

Laboratory validation of a simplified model for estimating equilibrium PFAS mass leaching from unsaturated soils

Modelling per- and polyfluoroalkyl substance (PFAS) fate and transport in the vadose zone is inherently more complex than in the saturated zone due to the highly transient nature and the wetting phase saturation dependent hydraulic flux associated with the vadose zone. The chemical complexity of PFAS impart multiple partitioning processes which complicate the evaluation of PFAS transport in the vadose zone. To date, simplified screening models describing PFAS leaching have been developed to determine PFAS soil cleanup criteria in the vadose zone. Recent work has presented evidence that while PFAS transport in the vadose zone is governed by several non-equilibrium mechanisms, it is possible to predict PFAS mass flux using equilibrium modelling over month to year timescales. We hypothesized that by quantifying important equilibrium partitioning and hydraulic processes, we could simplify vadose zone leaching models for assessing mass flux from the vadose zone to the underlying groundwater. A mass flux, cell-based model which accounts for important partitioning processes (solid and air-water interfacial partitioning) and transience in hydraulic processes (water flux and water content) was developed and validated herein. Column studies were conducted under simulated rainfall conditions to provide transient hydraulic and PFAS leaching data. A HYDRUS 1-D with PFAS module model was calibrated to the hydraulic conditions of the simulated rainfall columns. Forward simulations were carried out using HYDRUS and the mass balance approximation models. The HYDRUS and mass balance approximations performed nearly identically for all PFAS, and both models predicted PFAS mass leaching within a half order of magnitude of most measured data. These results suggest that readily applicable empirical models and simplified numerical models can reasonably estimate month to year scale mass flux from the vadose zone for sites without major heterogeneity or transport non-ideality considerations.

Occurrence, migration, and assessment of human health and ecological risks of PFASs and EDCs in groundwater of Northeast China

Northeast China as an important base of grain production in China, has been suffering from potential groundwater pollution due to the excessive and prolonged application of fertilizers and pesticides. However, exploration of emerging contaminants pollution in groundwater and assessment of human health and ecological risks caused by large-scale agricultural activities have been relatively scarce. This study collected groundwater samples from typical agricultural areas in Northeast China to investigate the extent of contamination by nitrate, per- and polyfluoroalkyl substances (PFASs) and endocrine-disrupting compounds (EDCs), and then compared the levels of these pollutants with those in other regions of China. Groundwater nitrate pollution caused by strong agricultural activity is widespread in Northeast China, with nitrate-nitrogen (NO3N) concentrations exceeding 10 mg/L in as many as 40.3 % of 429 samples. 8 types of PFASs (3.7-7.1 ng/L) and 11 types of EDCs (18,114.0-62,029.8 ng/L) were detected in the collected groundwater samples. Using the Risk Quotient (RQ) method, this study assessed ecological risk and found that the risk level of perfluorooctane sulfonate (PFOS) was higher than that of other PFASs. The groundwater EDCs risks in Northeast China was higher compared to other regions in China, with dibutyl phthalate (DBP), Di-(2-ethylhexyl) phthalate (DEHP), Bisphenol A (BPA) having high ecological risk levels. Nitrate, PFASs and EDCs have been detected in deep groundwater (70-100 m depth), indicating that the deeper aquifers could be significantly threatened by pollutants due to human activities. Fertilizers, pesticides, domestic wastewater, and industrial discharges are major sources of groundwater pollutants in the agricultural regions. Industrial-sourced EDCs were widely detected in groundwater of agricultural area, suggesting that the transport of these pollutants is very active in groundwater system. Groundwater monitoring and pollution prevention are extremely urgent, especially for emerging contaminants. This study can provide important warnings and water resource management references for other agricultural areas affected by intensively agricultural activities in the world.

Sources and Pathways of PFAS Occurrence in Water Sources: Relative Contribution of Land-Applied Biosolids in an Agricultural Dominated Watershed

This study evaluated PFAS occurrence in rural well water and surface water relative to land application of biosolids in a tile-drained agriculture-dominated watershed. Spatial data were used to identify potentially vulnerable rural wells based on their proximity to biosolid-permitted land and location with respect to groundwater flow. Water was collected from 103 private wells in Greater Tippecanoe County Indiana and 168 surface water locations within the Region of the Great Bend of the Wabash River watershed. Overall, results indicate that surface water (∑PFAS ≤ 169.4 ng/L) is more vulnerable to PFAS contamination than well water (∑PFAS ≤ 15.7 ng/L). Short-chain perfluoroalkyl acids made up 72% of the ∑PFAS in both water sources. Nonetheless, long-chain homologues were detected more frequently in surface water (94%) than well water (82%). Hierarchical cluster analysis identified biosolid-applied fields, WTTPs, and industrial discharges as PFAS sources in first-order streams with high ∑PFAS. Temporal trends revealed an inverse relationship between streamflow and concentrations in surface water sites impacted by point discharges and vice versa for diffuse sources, thereby providing complementary evidence of potential sources. The well water data set did not show a distinct spatial trend between ∑PFAS and distance from biosolid application or well characteristics.

PFAS fate using lysimeters during degraded soil reclamation using biosolids

Carbon- and nutrient-rich biosolids are used in agriculture and land reclamation. However, per- and polyfluoroalkyl substances (PFAS) typically present in biosolids raise concerns of PFAS leaching to groundwater and plant uptake. Here, we investigated PFAS persistence and leaching from biosolids applied to a site constructed artificially to mimic degraded soils. Treatments included biosolids and biosolids blended with mulch applied at different rates to attain either one and five times the agronomic N rate for vegetable crops and a control treatment with synthetic urea and triple superphosphate fertilizer. Leachates were collected for a 2-year period from 15-cm depth zero-tension drainage lysimeters. Soils were analyzed post biosolids application. PFAS were quantified using isotope-dilution, solid-phase extraction and liquid chromatography tandem mass spectrometry. Leachate profiles exemplified an initial high total PFAS concentration, followed by a sharp decline and subsequent small fluctuations attributed to pre-existing soil conditions and rainfall patterns. Quantifiable PFAS in leachate were proportional to biosolids application rates. Short-chain perfluoroalkyl acids (CF2 < 6) were dominant in leachate, while the percentage of longer chains homologues was higher in soils. A 43% biosolids blend with mulch resulted in 21% lower PFAS leachate concentrations even with the blend application rate being 1.5 times higher than biosolids due to the blend's lower N-content. The blending effect was more pronounced for long-chain perfluoroalkyl sulfonic acids that have a greater retention by soils and the air-water interface. Biosolids blending as a pragmatic strategy for reducing PFAS leachate concentrations may aid in the sustainable beneficial reuse of biosolids.

Influence of kinetic air-water interfacial partitioning on unsaturated transport of PFAS in sandy soils

This study investigates the impact of kinetic air-water partitioning on the transport of perfluoroalkyl substances (PFAS) within homogeneous and heterogeneous sandy vadose zones under transient unsaturated flow conditions. These experimental conditions are realistic for field behavior, where transient flow foments the continual growth and collapse of air-water interfaces (AWIs), and where layered heterogenous conditions enhance the perturbations of AWIs. Short-chain PFAS behave like conservative tracers with negligible air-water interface partitioning, whereas longer-chain PFAS demonstrate non-equilibrium retention behavior, especially in heterogeneous media. AWI partitioning kinetics were found to be important in controlling PFAS transport and mass flux, particularly during PFAS sorption to the air-water interface, which results because of the different nature and more rapid changes in AWI during drainage, wherein PFAS are moving toward the interface to achieve equilibrium, than during imbibition, where PFAS are leaving the interface to achieve equilibrium. Neglecting these kinetic AWI sorption processes can result in an underestimate of the PFAS transport velocities and mass flux reaching the water table. The presence of trapped air may also inhibit PFAS partitioning in a similar manner by causing longer diffusion paths from bulk water to a portion of the AWIs. The modified HYDRUS effectively captured the transport processes and provided an excellent match to the measured breakthrough curves. To assess relevance using realistic transient infiltration rates, simulations were conducted using precipitation data from an actual site. The results showed that accounting for kinetic AWI partitioning increases the cumulative PFOS mass flux to groundwater by a factor of 2.3 compared to equilibrium conditions, significantly impacting PFAS porewater concentrations. This difference was threefold under experimental conditions, suggesting that the importance of kinetic effects may vary significantly over the long term and under different climatic conditions or soil types, due to their strong dependence on water flux.

Innovative techniques for combating a common enemy forever chemicals: A comprehensive approach to mitigating per- and polyfluoroalkyl substances (PFAS) contamination

The pervasive presence of per and polyfluoroalkyl substances (PFAS), commonly referred to as "forever chemicals," in water systems poses a significant threat to both the environment and public health. PFAS are persistent organic pollutants that are incredibly resistant to degradation and have a tendency to accumulate in the environment, resulting in long-term contamination issues. This comprehensive review delves into the primary impacts of PFAS on both the environment and human health while also delving into advanced techniques aimed at addressing these concerns. The focus is on exploring the efficacy, practicality, and sustainability of these methods. The review outlines several key methods, such as advanced oxidation processes, novel materials adsorption, bioremediation, membrane filtration, and in-situ chemical oxidation, and evaluates their effectiveness in addressing PFAS contamination. By conducting a comparative analysis of these techniques, the study aims to provide a thorough understanding of current PFAS remediation technologies, as well as offer insights into integrated approaches for managing these persistent pollutants effectively. While acknowledging the high efficiency of adsorption and membrane filtration in reducing persistent organic pollutants due to their relatively low cost, versatility, and wide applicability, the review suggests that the integration of these methods could result in an overall enhancement of removal performance. Additionally, the study emphasizes the need for researcher attention in key areas and underscores the necessity of collaboration between researchers, industry, and regulatory authorities to address this complex challenge.

Effect of physicochemical parameters on the occurrence of per- and polyfluoroalkyl substances (PFAS) in aquatic environment

Perfluoroalkyl substances (PFAS) and their distribution in aquatic environments have been studied extensively, but more information is needed to link these occurrences to their physicochemical characteristics. Understanding how these parameters influence PFAS can help predict their fate, mobility, and occurrences in water. This study reviewed the influence of physicochemical parameters on the occurrences of PFAS in aquatic environment using the relevant keywords to retrieve articles from databases spanning mostly between 2017 and 2024. The result suggests that high pH, turbidity, and dissolved oxygen, give high concentration of PFAS, while high electrical conductivity, temperature and salinity give low PFAS concentration in the water. Therefore, monitoring and safeguarding the aquatic bodies for human and environmental safety is imperative. Future studies should include the effects of the physicochemical properties on PFAS occurrences in the natural environment and focus on an organism's distinctive characteristics to comprehend the bioaccumulation and biomagnification of PFAS in them and environmental matrices.

Transport and competitive interfacial adsorption of PFOA and PFOS in unsaturated porous media: Experiments and modeling

Among emerging contaminants, per- and polyfluoroalkyl substances (PFAS) have captured public attention based upon their environmental ubiquity and potential risks to human health. Due to their typical surface release conditions and amphiphilic properties, PFAS tend to sorb to soil and accumulate at the air-water interface within the vadose zone. These processes can result in substantial plume attenuation. Although there is a growing body of literature on vadose zone transport, few studies have explored PFAS mixture transport, particularly under conditions where nonlinear sorption processes are important. The present study aims to advance our understanding of PFAS transport in variably saturated porous media through integration of experiments and mathematical modeling. Experiments include batch studies to quantify sorption to the solid phase, interfacial tension (IFT) measurements to estimate adsorption at the air-water interface (AWI), and column studies with F-70 Ottawa sand at 100 % and ca. 50 % water saturation to explore transport mechanisms. Employed PFAS solutions encompass individual solutes and binary mixtures of perfluorooctanoic acid (PFOA) and perfluorooctane sulfonate (PFOS) at concentration levels spanning four orders of magnitude to assess competitive and nonlinear sorption at the AWI. Observations demonstrate that concentration levels and competitive effects substantially influence PFAS transport in unsaturated systems. In the presence of PFOS, PFOA experienced less retention than would be anticipated based on single-solute behavior, and effluent breakthrough curves exhibited chromatographic peaking. The presented mathematical model for simultaneous flow and transport of PFAS was able to capture experimental observations with a consistent set of parameters and minimal curve fitting. These results demonstrate the robustness of the model formulation that included rate-limited interfacial mass transfer, an extended Langmuir-Szyszkowski model for adsorption at the AWI, and a scaled Leverett thermodynamic model to predict the AWI specific area. Overall, the results of this work underscore the importance of the AWI in PFAS transport and highlight the relevance of competition effects in adsorption formulations.

Per- and poly-fluoroalkyl substances (PFAS) sensing: A focus on representatively sampling soil vadose zones linked to nano-sensors

Per- and poly-fluoroalkyl substances (PFAS) are a group of organo-fluorine compounds that have been broadly used in consumer and industrial products spanning virtually all sectors. They can be found as surfactants, coatings and liners, polymer additives, fire retardants, adhesives, and many more. The chemical stability of the carbon fluorine bond and amphiphilic nature of PFAS result in their persistence and mobility in the environment via soil porewater, surface water and groundwater, with potential for adverse effects on the environment and human health. There is an emergent and increasing requirement for fast, low-cost, robust, and portable methods to detect PFAS, especially in the field. There may be thousands of PFAS compounds present in soil and water at extremely low concentration (0.01-250 ppb) that require measurement, and traditional technologies for continuous environmental sensing are challenged due to the complexity of soil chemistry. This paper presents a comprehensive review of potentially rapid PFAS measurement methods, focused on techniques for representative sampling of PFAS in porewater from contaminated soil, and approaches for pre-treatment of porewater samples to eliminate these interferences to be ready for PFAS-detecting sensors. The review discusses selectivity, a key factor underlying pre-treatment and sensing performance, and explores the interactions between PFAS and various sensors. PFAS chemical nano-sensors discussed are categorized in terms of the detection mechanism (electrochemical and optical). This review aims to provide guidance and outline the current challenges and implications for future routine PFAS sensing linked to soil porewater collection, to achieve more selective and effective PFAS sensors.

Soil amendments reduce PFAS bioaccumulation in Eisenia fetida following exposure to AFFF-impacted soil

The efficacy of RemBind® 300 to immobilize per- and polyfluoroalkyl substances (PFAS) in aqueous film forming foam (AFFF)-impacted soil (∑28 PFAS 1280-8130 ng g-1; n = 8) was assessed using leachability (ASLP) and bioaccumulation (Eisenia fetida) endpoints as the measure of efficacy. In unamended soil, ∑28 PFAS leachability ranged from 26.0 to 235 μg l-1, however, following the addition of 5% w/w RemBind® 300, ∑28 PFAS leachability was reduced by > 99%. Following exposure of E. fetida to unamended soil, ∑28 PFAS bioaccumulation ranged from 18,660-241,910 ng g-1 DW with PFOS accumulating to the greatest extent (15,150-212,120 ng g-1 DW). Biota soil accumulation factors (BSAF) were significantly (p < 0.05) higher for perfluoroalkyl sulfonic acids (PFSA; 13.2-50.9) compared to perfluoroalkyl carboxylic acids (PFCA; 1.2-12.7) while for individual PFSA, mean BSAF increased for C4 to C6 compounds (PFBS: 42.6; PFPeS: 52.7; PFHxS: 62.4). In contrast, when E. fetida were exposed to soil amended with 5% w/w RemBind® 300, significantly lower PFAS bioaccumulation occurred (∑28 PFAS: 339-3397 ng g-1 DW) with PFOS accumulation 23-246 fold lower compared to unamended soil. These results highlight the potential of soil amendments for reducing PFAS mobility and bioavailability, offering an immobilization-based risk management approach for AFFF-impacted soil.

Biotransformation of PFAA Precursors by Oxygenase-Expressing Bacteria in AFFF-Impacted Groundwater and in Pure-Compound Studies with 6:2 FTS and EtFOSE

Numerous US drinking water aquifers have been contaminated with per- and polyfluoroalkyl substances (PFAS) from fire-fighting and fire-training activities using aqueous film-forming foam (AFFF). These sites often contain other organic compounds, such as fuel hydrocarbons and methane, which may serve as primary substrates for cometabolic (i.e., nongrowth-linked) biotransformation reactions. This work investigates the abilities of AFFF site relevant bacteria (methanotrophs, propanotrophs, octane, pentane, isobutane, toluene, and ammonia oxidizers), known to express oxygenase enzymes when degrading their primary substrates, to biotransform perfluoroalkyl acid (PFAA) precursors to terminal PFAAs. Microcosms containing AFFF-impacted groundwater, 6:2 fluorotelomer sulfonate (6:2 FTS), or N-ethylperfluorooctane sulfonamidoethanol (EtFOSE) were inoculated with the aerobic cultures above and incubated for 4 and 8 weeks at 22 °C. Bottles were sacrificed, extracted, and subjected to target, nontarget, and suspect screening for PFAS. The PFAA precursors 6:2 FTS, N-sulfopropyldimethyl ammoniopropyl perfluorohexane sulfonamide (SPrAmPr-FHxSA), and EtFOSE transformed up to 99, 71, and 93%, respectively, and relevant daughter products, such as the 6:1 fluorotelomer ketone sulfonate (6:1 FTKS), were identified in quantities previously not observed, implicating oxygenase enzymes. This is the first report of a suite of site relevant PFAA precursors being transformed in AFFF-impacted groundwater by bacteria grown on substrates known to induce specific oxygenase enzymes. The data provide crucial insights into the microbial transformation of these compounds in the subsurface.

Per- and polyfluoroalkyl substances (PFAS) as contaminants in groundwater resources - A comprehensive review of subsurface transport processes

Per- and polyfluorinated alkyl substances (PFAS) are persistent contaminants in the environment. An increased awareness of adverse health effects related to PFAS has further led to stricter regulations for several of these substances in e.g. drinking water in many countries. Groundwater constitutes an important source of raw water for drinking water production. A thorough understanding of PFAS subsurface fate and transport mechanisms leading to contamination of groundwater resources is therefore essential for management of raw water resources. A review of scientific literature on the subject of processes affecting subsurface PFAS fate and transport was carried out. This article compiles the current knowledge of such processes, mainly focusing on perfluoroalkyl acids (PFAA), in soil- and groundwater systems. Further, a compilation of data on transport parameters such as solubility and distribution coefficients, as well as, insight gained and conclusions drawn from the reviewed material are presented. As the use of certain fire-fighting foams has been identified as the major source of groundwater contamination in many countries, research related to this type of pollution source has been given extra focus. Uptake of PFAS in biota is outside the scope of this review. The review showed a large spread in the magnitude of distribution coefficients and solubility for individual PFAS. Also, it is clear that the influence of multiple factors makes site-specific evaluation of distribution coefficients valuable. This article aims at giving the reader a comprehensive overview of the subject, and providing a base for further work.

Numerical modeling of PFAS movement through the vadose zone: Influence of plant water uptake and soil organic carbon distribution

In this study, we investigated the effects of soil organic carbon (SOC) distribution and water uptake by plant roots on PFAS movement in the vadose zone with a deep groundwater table under temperate, humid climate conditions. Two series of numerical simulations were performed with the HYDRUS computer code, representing the leaching of historical PFOS contamination and the infiltration of water contaminated with PFOA, respectively. We considered soil profiles with three distributions of SOC (no SOC, realistic SOC distribution decreasing with depth, and uniform SOC equal to the content measured in topsoil), three root distributions (bare soil, grassland, and forest), and three soil textures (sand, sandy loam, and loam). The SOC distribution had a profound impact on the velocity of PFOS movement. The apparent retardation factor for realistic SOC distribution was twice as large as for the scenario with no SOC and more than three times smaller than for the scenario with uniformly high SOC content. We also showed that the root distribution in soil profoundly impacts the simulations of PFAS migration through soil. Including the root zone significantly slows down the movement of PFAS, primarily due to increased evapotranspiration and reduced downward water flux. Another effect of water uptake by plant roots is an increase of PFAS concentrations in soil water (evapo-concentration). The evapo-concentration and the slowdown of PFAS movement due to root water uptake are more significant in fine-textured soils than in sand.

Air-water interfacial collapse and rate-limited solid desorption control Perfluoroalkyl acid leaching from the vadose zone

Some Per- and polyfluoroalkyl substances (PFAS) are strongly retained in the vadose zone due to their sorption to both soils and air-water interfaces. While significant research has been dedicated to understanding equilibrium behavior for these multi-phase retention processes, leaching and desorption from aqueous film-forming foam (AFFF) impacted soils under field relevant conditions can exhibit significant deviations from equilibrium. Herein, laboratory column studies using field collected AFFF-impacted soils were employed to examine the leaching of perfluoroalkyl acids (PFAAs) under simulated rainfall conditions. The HYDRUS 1-D model was calibrated to estimate the unsaturated hydraulic properties of the soil in a layered system using multiple boundary condtions. Forward simulations of equilibrium PFAS partitioning using the HYDRUS model and simplified mass balance calculations showed good agreement with the net PFAS mass flux out of the column. However, neither were able to predict the PFAS concentrations in the leached porewater. To better understand the mechanisms controlling the leaching behavior, the HYDRUS 1-D two-site leaching model incorporating solid phase rate limitation and equilibrium air-water interfacial partitioning was employed. Three variations of the novel model incorporating different forms of equilibrium air-water interfacial partitioning were considered using built-in numerical inversion. Results of numerical inversion show that a combination of air-water interfacial collapse and rate-limited desorption from soils can better predict the unique leaching behavior exhibited by PFAAs in AFFF-impacted soils. A sensitivity analysis of the initial conditions and rate-limited desorption terms was conducted to assess the agreement of the model with measured data. The models demonstrated herein show that, under some circumstances, laboratory equilibrium partitioning data can provide a reasonable estimation of total mass leaching, but fail to account for the significant rate-limited, non-Fickian transport which affect PFAA leaching to groundwater in unsaturated soils.

Anaerobic biodegradation of perfluorooctane sulfonate (PFOS) and microbial community composition in soil amended with a dechlorinating culture and chlorinated solvents

Perfluorooctane sulfonate (PFOS), one of the most frequently detected per- and polyfluoroalkyl substances (PFAS) occurring in soil, surface water, and groundwater near sites contaminated with aqueous film-forming foam (AFFF), has proven to be recalcitrant to many destructive remedies, including chemical oxidation. We investigated the potential to utilize microbially mediated reduction (bioreduction) to degrade PFOS and other PFAS through addition of a known dehalogenating culture, WBC-2, to soil obtained from an AFFF-contaminated site. A substantial decrease in total mass of PFOS (soil and water) was observed in microcosms amended with WBC-2 and chlorinated volatile organic compound (cVOC) co-contaminants - 46.4 ± 11.0 % removal of PFOS over the 45-day experiment. In contrast, perfluorooctanoate (PFOA) and 6:2 fluorotelomer sulfonate (6:2 FTS) concentrations did not decrease in the same microcosms. The low or non-detectable concentrations of potential metabolites in full PFAS analyses, including after application of the total oxidizable precursor assay, indicated that defluorination occurred to non-fluorinated compounds or ultrashort-chain PFAS. Nevertheless, additional research on the metabolites and degradation pathways is needed. Population abundances of known dehalorespirers did not change with PFOS removal during the experiment, making their association with PFOS removal unclear. An increased abundance of sulfate reducers in the genus Desulfosporosinus (Firmicutes) and Sulfurospirillum (Campilobacterota) was observed with PFOS removal, most likely linked to initiation of biodegradation by desulfonation. These results have important implications for development of in situ bioremediation methods for PFAS and advancing knowledge of natural attenuation processes.

Spatial distribution, compositional characteristics, and source apportionment of legacy and novel per- and polyfluoroalkyl substances in farmland soil: A nationwide study in mainland China

China, as one of the largest global producers and consumers of per- and poly-fluoroalkyl substances (PFASs), faces concerning levels of PFAS pollution in soil. However, knowledge of their occurrence in agricultural soils of China on the national scale remains unknown. Herein, the first nationwide survey was done by collecting 352 soil samples from 31 provinces in mainland China. The results indicated that the Σ24PFASs concentrations were 74.3 - 24880.0 pg/g, with mean concentrations of PFASs in decreasing order of legacy PFASs > emerging PFASs > PFAS precursors (640.2 pg/g, 340.7 pg/g, and 154.9 pg/g, respectively). The concentrations in coastal eastern China were distinctly higher than those in inland regions. Tianjin was the most severely PFASs-contaminated province because of rapid urban industrialization. This study further compared the PFAS content in monoculture and multiple cropping farmland soils, finding the concentrations of PFASs were high in soils planted with vegetable and fruit monocultures. Moreover, a positive matrix factorization (PMF) model was employed to identify different sources of PFASs. Fluoropolymer industries and aqueous film-forming foams were the primary contributors. The contributions from different emission sources varied across the seven geographical regions. This study provides new baseline data for prevention and control policies for reducing pollution.

Emergence of per- and poly-fluoroalkyl substances (PFAS) and advances in the remediation strategies

A group of fluorinated organic molecules known as per- and poly-fluoroalkyl substances (PFAS) have been commonly produced and circulated in the environment. PFAS, owing to multiple strong CF bonds, exhibit exceptional stability and possess a high level of resistance against biological or chemical degradation. Recently, PFAS have been identified to cause numerous hazardous effects on the biotic ecosystem. As a result, extensive efforts have been made in recent years to develop effective methods to remove PFAS. Adsorption, filtration, heat treatment, chemical oxidation/reduction, and soil washing are a few of the physicochemical techniques that have shown their ability to remove PFAS from contaminated matrixes. However these methods also carry significant drawbacks, including the fact that they are expensive, energy-intensive, unsuitable for in-situ treatment, and requirement to be carried under dormant conditions. The metabolic products released upon PFAS degradation are largely unknown, despite the fact that thermal disintegration methods are widely used. In contrast to physical and chemical methods, biological degradation of PFAS has been regarded as efficient method. However, PFAS are difficult to instantly and completely metabolize through biological methods due to the limitations of biocatalytic mechanisms. Nevertheless, cost, easy-to-operate and environmentally safe are some of the advantages over its counterpart. The present review comprehensively discusses the occurrence of PFAS, the state-of-the science of remediation technologies and approaches applied, and the remediation challenges. The article also focuses on the future research directions toward the development of effective methods for PFAS-contaminated site in-situ treatment.

Production of perfluoroalkyl acids (PFAAs) from precursors in contaminated agricultural soils: Batch and leaching experiments

Contamination of soils with per- and polyfluoroalkyl substances (PFAS) (e.g., aqueous film forming foams (AFFFs) or PFAS containing biosolids applied to agricultural soils) can lead to large scale groundwater pollution. For site management, knowledge about the extent and time scales of PFAS contamination is crucial. At such sites, often persistent perfluoroalkyl acids (PFAAs) and so-called precursors, which can be transformed into PFAAs, co-occur. In this study, the release of PFAAs from 14 soil samples from an agricultural site in southwest Germany contaminated via compost/paper sludge was investigated. Rapid leaching of C4-C8 perfluoroalkyl carboxylic acids (PFCA) was observed in saturated column tests, while slowing down with increasing chain-length (≥ C9 PFCAs). Two selected samples were further incubated in batch-tests after removal of existing C4-C8 PFCAs in extensive column leaching tests until a liquid-solid ratio of 10 l/kg. During 60 days of incubation, aqueous concentrations of C4-C8 PFCAs increased linearly by a factor of 29-222, indicating continuous production by transformation of precursors. The potential PFAA-precursor reservoir was estimated by the direct total oxidizable precursor (dTOP) assay. PFCA concentrations after the dTOP increased up to two orders of magnitude. Production rates determined in batch-tests combined with the results of dTOP assay were used to estimate time scales for the duration of C4-C8 PFCAs emission from the contaminated agricultural soils which likely will last for several decades.

The occurrence, spatial distribution, and well-depth dependence of PFASs in groundwater from a reclaimed water irrigation area

With the growing development of modern agriculture and industry, groundwater is facing more and more complex contaminants. One such contaminant is per- and polyfluoroalkyl substances (PFASs), which pose a potential risk to human health, particularly for those who rely on groundwater as their primary source of drinking water. In this study, we conducted a comprehensive investigation on the occurrence, spatial distribution, and source apportionment of PFASs in shallow (<60 m) and deep (>80 m) groundwater samples from a reclaimed water irrigation area in Beijing's suburbs. Our results showed that the average total PFAS concentration (∑10PFAS) for all samples was 10.55 ± 7.77 ng/L, ranging from 1.05 to 34.28 ng/L. The dominant congeners were PFBA, PFOA, and PFBS. No significant linear relationship was observed between PFAS concentrations and the well depth. However, the averaged ΣPFASs in groundwater were highest in the uppermost layer and declined sharply to a few ng/L in the deep aquifer below 80 m. PFASs showed elevated concentration in shallow aquifers in 9 out of 11 paired wells, indicating an overall descending trend of PFASs with increasing aquifer depth. The spatial distribution of PFASs was highly heterogeneous and showed different patterns in shallow and deep groundwater, which may be related to the complicated attenuation behavior of PFAS compounds when they transport and diffuse through overlapping aquifer layers. The influence of the landfill on groundwater PFASs was most pronounced within a 5 km radius. Source apportionment results indicated that reclaimed water irrigation is the main non-point source of PFASs in shallow groundwater. In contrast, deep groundwater is primarily subject to point sources and lateral recharge flow. This investigation of PFASs in shallow and deep wells provides a foundation for further exploration of PFASs transportation and risk prevention in regions where groundwater is a major water resource for domestic and industrial development.

A fundamental model for calculating interfacial adsorption of complex ionic and nonionic PFAS mixtures in the presence of mixed salts

Per- and polyfluoroalkyl substances (PFAS) are emerging contaminants that have been used extensively as firefighting agents and in a wide range of commercial applications around the world. As many of the most-common PFAS components are surfactants, they readily accumulate at interfaces, a process that can govern their environmental fate. There are thousands of PFAS compounds, and they have nearly always been used as mixtures, so it is common to find many different PFAS components present together in the environment. Furthermore, the interfacial behavior of ionic PFAS can be strongly influenced by the presence of salts, with adsorption dependent on both the composition and concentration of salts present. Any predictions of PFAS interfacial behavior made without considering both the mixed nature of PFAS present, as well as the composition of the salts present, have the potential to be off by orders of magnitude. To date, models capable of making predictions of PFAS interfacial adsorption when both mixed PFAS and mixed salts are present have not been presented. The work described here addresses this need by extending a mass-action model developed previously by the authors to allow predictions in cases where complex combinations of mixed PFAS and mixed salts are present. Predictions of PFAS interfacial affinity for a range of PFAS mixture conditions and ionic strengths are verified using experimentally-measured surface tension data. The new model provides physically-realistic prediction of interfacial adsorption of a wide range of PFAS mixtures over a wide range of salt concentrations and compositions. The model is capable of predicting interfacial adsorption of ionic/nonionic PFAS mixtures in the presence of salts, and can also make predictions when there is competitive adsorption between different PFAS components, a common case in PFAS source zones where high concentrations of multiple components are present and in foam fractionation reactors.

Genome-Wide Expression Analysis Unravels Fluoroalkane Metabolism in Pseudomonas sp. Strain 273

Pseudomonas sp. strain 273 grows with medium-chain terminally fluorinated alkanes under oxic conditions, releases fluoride, and synthesizes long-chain fluorofatty acids. To shed light on the genes involved in fluoroalkane metabolism, genome, and transcriptome sequencing of strain 273 grown with 1,10-difluorodecane (DFD), decane, and acetate were performed. Strain 273 harbors three genes encoding putative alkane monooxygenases (AlkB), key enzymes for initiating alkane degradation. Transcripts of alkB-2 were significantly more abundant in both decane- and DFD-grown cells compared to acetate-grown cells, suggesting AlkB-2 catalyzes the attack on terminal CH3 and CH2F groups. Coordinately expressed with alkB-2 was an adjacent gene encoding a fused ferredoxin-ferredoxin reductase (Fd-Fdr). Phylogenetic analysis distinguished AlkB that couples with fused Fd-Fdr reductases from AlkB with alternate architectures. A gene cluster containing an (S)-2-haloacid dehalogenase (had) gene was up-regulated in cells grown with DFD, suggesting a possible role in the removal of the ω-fluorine. Genes involved in long-chain fatty acid biosynthesis were not differentially expressed during growth with acetate, decane, or DFD, suggesting the bacterium's biosynthetic machinery does not discriminate against monofluoro-fatty acid intermediates. The analysis sheds first light on genes and catalysts involved in the microbial metabolism of fluoroalkanes.

A review on the fate and effects of contaminants in biosolids applied on land: Hazards and government regulatory policies

The increase in world population growth and its resultant increase in industrial production to meet its need, have continued to raise the volume of wastewater received by treatment plant facilities. This has expectedly, led to an upsurge in the volume of sewage sludge and biosolids generated from wastewater treatment systems. Biosolids are best managed by application on land because of their agronomic benefits. However, this usage has been discovered to negatively affect humans and impact the environment due to the accumulation of minute concentrations of contaminants still present in the biosolid after treatment, hence the need for government regulations. This review article examined the fate and effects of pollutants, especially persistent organic pollutants (PoPs) of concern and emerging contaminants found in biosolids used for land applications, and also discussed government regulations on biosolid reuse from the perspectives of the two major regulations governing biosolid land application-the EU's Sludge Directive and USEPA's Part 503 Rule, in an attempt to draw attention to their outdated contents since enactment, as they do not currently meet the challenges of biosolid land application and thus, require a comprehensive update. Any update efforts should focus on USEPA's Part 503 Rule, which is less stringent on the allowable concentration of biosolid pollutants. Furthermore, an update should include specific regulations on new and emerging contaminants and persistent organic pollutants (PoPs) such as microplastics, pharmaceutical and personal care products (P&PCPs), surfactants, endocrine-disrupting chemicals, flame retardants, pathogens, and organic pollutants; further reduction of heavy metal standard limits, and consideration of soil phosphate-metal interactions to regulate biosolid agronomic loading rate. Future biosolid research should focus on the concentration of TCS, TCC, and emerging pharmaceuticals, as well as Microplastic transport in biosolid-amended soils, soil-plant transfer mechanism, and metabolism of PFAs in the soils; all of which will inform government policies on biosolid application on land.

Trends in the Analysis and Exploration of per- and Polyfluoroalkyl Substances (PFAS) in Environmental Matrices: A Review

Per- and polyfluoroalkyl substances (PFAS) is an emerging class of organic pollutants of concern and is now prevalent in environmental matrices including water, soil, air, and biological. So far, several standard analytical methods have been developed to systematically analyze PFAS in different environmental matrices. However, the complexity of environmental matrices makes the effective extraction of PFAS difficult, and the legacy PFAS is gradually changing into a new PFAS with short chain and unknown structure in production, which makes the analysis of PFAS challenging. In this review, the following aspects are summarized: (1) the advances in standard analytical methods for PFAS in different environmental matrices, and further generalizes the updating novel extraction and detection methods; (2) the analysis of unknown PFAS, the suspect and non-targeted screening analysis method of PFAS based on high-resolution mass spectrometry (HRMS) is systematically described.

Role of Mineral-Organic Interactions in PFAS Retention by AFFF-Impacted Soil

A comprehensive, generalized approach to predict the retention of per- and polyfluoroalkyl substances (PFAS) from aqueous film-forming foam (AFFF) by a soil matrix as a function of PFAS molecular and soil physiochemical properties was developed. An AFFF with 34 major PFAS (12 anions and 22 zwitterions) was added to uncontaminated soil in one-dimensional saturated column experiments and PFAS mass retained was measured. PFAS mass retention was described using an exhaustive statistical approach to generate a poly-parameter quantitative structure-property relationship (ppQSPR). The relevant predictive properties were PFAS molar mass, mass fluorine, number of nitrogens in the PFAS molecule, poorly crystalline Fe oxides, organic carbon, and specific (BET-N2) surface area. The retention of anionic PFAS was nearly independent of soil properties and largely a function of molecular hydrophobicity, with the size of the fluorinated side chain as the main predictor. Retention of nitrogen-containing zwitterionic PFAS was related to poorly crystalline metal oxides and organic carbon content. Knowledge of the extent to which a suite of PFAS may respond to variations in soil matrix properties, as developed here, paves the way for the development of reactive transport algorithms with the ability to capture PFAS dynamics in source zones over extended time frames.

Predicting Concentration- and Ionic-Strength-Dependent Air-Water Interfacial Partitioning Parameters of PFASs Using Quantitative Structure-Property Relationships (QSPRs)

Air-water interfacial retention of poly- and perfluoroalkyl substances (PFASs) is increasingly recognized as an important environmental process. Herein, column transport experiments were used to measure air-water interfacial partitioning values for several perfluoroalkyl ethers and for PFASs derived from aqueous film-forming foam, while batch experiments were used to determine equilibrium K_ia data for compounds exhibiting evidence of rate-limited partitioning. Experimental results suggest a Freundlich isotherm best describes PFAS air-water partitioning at environmentally relevant concentrations (10¹-10⁶ ng/L). A multiparameter regression analysis for K_ia prediction was performed for the 15 PFASs for which equilibrium K_ia values were determined, assessing 246 possible combinations of 8 physicochemical and system properties. Quantitative structure-property relationships (QSPRs) based on three to four parameters provided predictions of high accuracy without model overparameterization. Two QSPRs (R² values of 0.92 and 0.83) were developed using an assumed average Freundlich n value of 0.65 and validated across a range of relevant concentrations for perfluorooctane sulfonate (PFOS), perfluorooctanoate (PFOA), and hexafluoropropylene oxide-dimer acid (i.e., GenX). A mass action model was further modified to account for the changing ionic strength on PFAS air-water interfacial sorption. The final result was two distinct QSPRs for estimating PFAS air-water interfacial partitioning across a range of aqueous concentrations and ionic strengths.

Recent advances in the remediation of perfluoroalkylated and polyfluoroalkylated contaminated sites

Per- and polyfluoroalkyl substances (PFASs) are compounds used since 1940 in various formulations in the industrial and consumer sectors due to their high chemical and thermal stability. In recent years, PFASs have caused global concern due to their presence in different water and soil matrices, which threatens the environment and human health. These compounds have been reported to be linked to the development of serious human diseases, including but not limited to cancer. For this reason, PFASs have been considered as persistent organic compounds (COPs) and contaminants of emerging concern (CECs). Therefore, this work aims to present the advances in remediation of PFASs-contaminated soil and water by addressing the current literature. The performance and characteristics of each technique were addressed deeply in this work. The reviewed literature found that PFASs elimination studies in soil and water were carried out at a laboratory and pilot-scale in some cases. It was found that ball milling, chemical oxidation and thermal desorption are the most efficient techniques for the removal of PFASs in soils, however, phyto-microbial remediation is under study, which claims to be a promising technique. For the remediation of PFASs-contaminated water, the processes of electrocoagulation, membrane filtration, ozofractionation, catalysis, oxidation reactions - reduction, thermolysis and destructive treatments with plasma have presented the best results. It is noteworthy that hybrid treatments have also proved to be efficient techniques in the removal of these contaminants from soil and water matrices. Therefore, the improvisation and implication of existing techniques on a field-scale are greatly warranted to corroborate the yields obtained on a pilot- and laboratory-scale.

Leaching of Perfluoroalkyl Acids during Unsaturated Zone Flushing at a Field Site Impacted with Aqueous Film Forming Foam

While several studies have focused on perfluoroalkyl acid (PFAA) leaching from soils, field studies evaluating the relationship between PFAA mass removal and porewater concentrations as the PFAA source becomes depleted are lacking. Herein, in situ water flushing was performed at a site historically impacted with AFFF to accelerate the leaching of PFAAs from unsaturated soils in a highly characterized field test cell. Porous cup suction lysimeters were used to assess the changes in PFAA porewater concentrations as a function of PFAA mass removal from the unsaturated soils, where flushing was intermittently paused to determine ambient PFAA porewater concentrations. Results showed that the fractional decreases in PFAA porewater concentrations during flushing exceeded the fractional decrease in PFAA mass removal from the soil. PFOS porewater concentrations decrease by 76% (with negligible rebound) compared to only a 7.4% decrease in overall PFOS mass removed from the unsaturated zone. Overall, the results observed herein suggest that, when considering soil impacts to groundwater, less stringent soil cleanup criteria than those that consider an equivalent relationship between mass removal and mass discharge may be appropriate. In addition, remedial approaches that remove only a modest fraction of the PFAA soil mass may be protective of underlying groundwater, particularly for perfluorinated sulfonates with at least six carbons.

Distribution of legacy and novel per- and polyfluoroalkyl substances in surface and groundwater affected by irrigation in an arid region

Frequent exchange of surface water and groundwater occurs in arid/semi-arid areas due to high evaporation and intensive irrigation activities, affecting the migration and transformation of per- and polyfluoroalkyl substances (PFASs) and threatening drinking water safety. This study analyzed legacy PFASs and potential precursors in surface water, groundwater, soil, and aquifer solid samples collected from a typical arid area, the Hetao Irrigation District of Northern China, to explore PFASs distribution and transformation between surface and ground. Total PFASs (ΣPFASs) in surface water was 29-232 ng/L, higher than 2-77 ng/L in groundwater. ΣPFASs in soil were 0.29-0.59 ng/g, higher than 0.09-0.27 in the aquifer solids. Regarding horizontal distribution, the concentration of PFASs in groundwater increased in downtowns and the areas recharged with lake water. In terms of vertical distribution, ΣPFASs decreased with the increase of depth, and more PFASs adsorbed on clay particles in the aquifer. The total oxidable precursor analysis showed that 8:2 FT and 4:2 FT were the dominant precursors of PFASs, resulting in an increment of 0.1-4 ng/L PFASs. Hydrogen and oxygen stable isotope compositions suggest similar sources between surface water and groundwater in the study area, while principal component analysis and Bayesian inference also indicate that surface water is an important source of groundwater PFASs. The annual infiltration PFASs to groundwater from Ulansuhai was estimated by the water balance approach to be 9.39 kg. Results highlight the influence of agricultural irrigation activities and lake infiltration on groundwater PFASs in the arid region.

Microcosm experiment to test bacterial responses to perfluorooctanoate exposure

The impact of perfluoroalkyl and polyfluoroalkyl substances on microbial communities is challenging to investigate in situ because of the complexity and dynamics of natural ecosystems. In the present study, four microcosms were established to explore the impact of perfluorooctanoate (PFOA) on bacterial communities in riverine and marine settings. PFOA distribution between the aqueous and sedimentary phases fluctuated in both PFOA-amended and unamended control systems. PFOA was more rapidly partitioned into the sediment in marine than in riverine microcosms. Differences in iron concentration and salinity may influence PFOA exchange between water and sediment. In marine microcosms, the alpha diversity of bacterial communities was significantly correlated to PFOA concentration. PFOA tended to correlate more strongly with bacterial community composition in water than in sediment. At the whole system level, Lefse's analysis indicated Algoriphagus halophilus as biomarkers for PFOA exposure in both riverine and marine systems, and the family Flavobacteriaceae were also more abundant in the exposed systems. In terms of temporal variation (comparison between three time points in the systems), metastat analysis showed great variability of potential PFOA-sensitive bacteria at the genus level. As such, most PFOA-sensitive genera were transitory and variable and existed for a short term in different systems (river, sea, blank, and experiment) and phases. Compared with other PFOA-sensitive genera, we suggest that further research is carried out to explore the use of Limnobacter as a bioindicator for temporal monitoring of PFOA pollution.

Adsorption of PFAAs in the Vadose Zone and Implications for Long-Term Groundwater Contamination

Perfluoroalkyl acids (PFAAs) are persistent environmental contaminants that sorb to air-water and solid interfaces throughout the vadose zone. These sorption processes lead to decadal leaching of PFAS from the source zones to groundwater systems. While these processes are increasingly well understood, critical gaps exist in describing the vertically variable adsorption in the presence of vadose zone heterogeneity and methods for efficiently upscaling the laboratory observations to predict field-scale PFAA transport and retardation. In this work, we build upon fundamental theories and scalable relationships to define a semi-analytical framework for synthesizing and upscaling PFAA adsorption in heterogeneous vadose zone systems. Solid-phase and air-water interfacial adsorption are quantified mechanistically for several PFAAs and then applied to a contaminated site in Northern Wisconsin. The results highlight the dominance of air-water and organic carbon solid-phase adsorption processes in the vadose zone. Strong sorption heterogeneity─driven by depth-dependent adsorption mechanisms─produces complex spatially variable retardation profiles. We develop vadose zone retardation potentials to quantify this field-scale heterogeneity and propose vertical integration methods to upscale spatially resolved information for transport modeling. This work highlights the importance of accounting for multiscale and multiprocess heterogeneity for accurately describing and predicting the long-term fate and transport of PFAAs in the subsurface.

Assessment of PFAS in collocated soil and porewater samples at an AFFF-impacted source zone: Field-scale validation of suction lysimeters

Per- and polyfluoroalkyl substances (PFAS) measurable in soil porewater authoritatively represent the mobile mass fraction critical to accurate assessment of leaching from source zones. This study evaluated PFAS occurrence in lysimeter-collected porewater samples for two depth intervals at a decades-old aqueous film-forming foam (AFFF)-impacted field site quarterly for a year. Notably, site-wide Log₁₀ (∑PFAS) concentrations did not significantly differ among sampling events despite highly variable sample yields due to a heterogeneous and dynamic soil moisture regime. However, Log₁₀ (∑PFAS) concentrations were significantly higher in the shallow interval concordant with higher mean soil concentrations and higher total organic carbon (TOC) reflecting net retention, which is supported by soil-to-groundwater annual mass discharge estimates less than 0.2% of the total source mass for any given PFAS. Interestingly, PFAS-specific Log₁₀ (soil-to-porewater ratios) significantly increased with soil concentration in both depth intervals contrary to concentration dependence resulting from the saturation of sorption sites potentially implicating self-assembly as an additional operative retention mechanism. Overall, these data validate the use of suction lysimeters for short-term site characterization deployments and emphasize the importance of in situ porewater samples for interrogating PFAS transport within source zones.

Retention of PFOS and PFOA Mixtures by Trapped Gas Bubbles in Porous Media

The transport of per- and polyfluoroalkyl substances (PFAS) in soil and groundwater is important for site investigation, risk characterization, and remediation planning. The adsorption of PFAS at air-water interfaces has been shown to significantly contribute to PFAS retention, with subsequent effects on concentrations and the time scales of transport. In this study, column experiments were conducted to investigate the transport of perfluorooctanesulfonic acid (PFOS), perfluorooctanoic acid (PFOA), and 6:2 fluorotelomer sulfonate (6:2 FTS) individually and in binary mixtures in the presence of a trapped gas phase, using clean sands to isolate adsorption to air-water interfaces. Consistent with previous studies, the transport of PFOS, PFOA, and 6:2 FTS was retarded by adsorption at the air-water interface, with greater retention of PFOS due to its higher affinity for the air-water interface. Chromatographic separation occurred in the experiments using binary mixtures of PFOS and PFOA, with greater retention at lower influent concentrations. The mixture experiments also showed enhanced breakthrough of PFOA in the presence of PFOS, where effluent concentrations of PFOA were temporarily greater than the influent concentration prior to the breakthrough of PFOS. This enhanced breakthrough was attributed to competition between PFOS and PFOA for adsorption to the air-water interface.

PFOS Mass Flux Reduction/Mass Removal: Impacts of a Lower-Permeability Sand Lens within Otherwise Homogeneous Systems

Perfluorooctane sulfonic acid (PFOS) is one of the most common per- and polyfluoroalkyl substances (PFAS) and is a significant risk driver for these emerging contaminants of concern. A series of two-dimensional flow cell experiments was conducted to investigate the impact of flow field heterogeneity on the transport, attenuation, and mass removal of PFOS. A simplified model heterogeneous system was employed consisting of a lower-permeability fine sand lens placed within a higher-permeability coarse sand matrix. Three nonreactive tracers with different aqueous diffusion coefficients, sodium chloride, pentafluorobenzoic acid, and β-cyclodextrin, were used to characterize the influence of diffusive mass transfer on transport and for comparison to PFOS results. The results confirm that the attenuation and subsequent mass removal of the nonreactive tracers and PFOS were influenced by mass transfer between the hydraulically less accessible zone and the coarser matrix (i.e., back diffusion). A mathematical model was used to simulate flow and transport, with the values for all input parameters determined independently. The model predictions provided good matches to the measured breakthrough curves, as well as to plots of reductions in mass flux as a function of mass removed. These results reveal the importance of molecular diffusion and pore water velocity variability even for systems with relatively minor hydraulic conductivity heterogeneity. The impacts of the diffusive mass transfer limitation were quantified using an empirical function relating reductions in contaminant mass flux (MFR) to mass removal (MR). Multi-step regression was used to quantify the nonlinear, multi-stage MFR/MR behavior observed for the heterogeneous experiments. The MFR/MR function adequately reproduced the measured data, which suggests that the MFR/MR approach can be used to evaluate PFOS removal from heterogeneous media.

Optimizing the fugacity model to select appropriate remediation pathways for perfluoroalkyl substances (PFASs) in a lake

Increased anthropogenic activities have caused contamination of perfluoroalkyl substances (PFASs) in lakes worldwide. However, how to remediate their contamination remains unclear. In this study, a heavily polluted lake, Baiyangdian Lake in China, was selected to investigate current PFASs levels in multimedia, stimulate their transport fate based upon an optimized fugacity model, and finally identify appropriate remediation pathways. From 2008-2019, the average concentrations of PFASs in the lake increased approximately 7-40 times in the environment and biota. Spatially, with continuous import of perfluorohexane sulfonate (PFHxS) and perfluorooctanoic acid (PFOA), barring fish, a noticeable north-south difference was distinguished in the PFASs composition in multimedia from the lake. Based on the optimized fugacity model simulation, the water phase was the primary transport path (~76.5%) for PFASs, with a total flux of 333 kg y^-1. Compared with bioaccumulation fluxes in submerged plants (6.2 kg y^-1), emerged plants (2.6 kg y^-1), and fish (1.1 kg y^-1), the exchange flux of PFASs between water and sediment remained high (~94 kg y^-1). Considering remediation cost, sediment cleaning is currently the most cost-effective pathway, while harvesting submerged plant could be a promising pathway in the future. This study provides a basis for remediating PFASs-polluted lakes on a global scale.

Phytoremediation prospects of per- and polyfluoroalkyl substances: A review

Extensive use of per- and polyfluoroalkyl substances (PFASs) in various industrial activities and daily-life products has made them ubiquitous contaminants in soil and water. PFAS-contaminated soil acts as a long-term source of pollution to the adjacent surface water bodies, groundwater, soil microorganisms, and soil invertebrates. While several remediation strategies exist to eliminate PFASs from the soil, strong ionic interactions between charged groups on PFAS with soil constituents rendered these PFAS remediation technologies ineffective. Pilot and field-scale data from recent studies have shown a great potential of PFAS to bio-accumulate and distribute within plant compartments suggesting that phytoremediation could be a potential remediation technology to clean up PFAS contaminated soils. Even though several studies have been performed on the uptake and translocation of PFAS by different plant species, most of these studies are limited to agricultural crops and fruit species. In this review, the role of both aquatic and terrestrial plants in the phytoremediation of PFAS was discussed highlighting different mechanisms underlying the uptake of PFASs in the soil-plant and water-plant systems. This review further summarized a wide range of factors that influence the bioaccumulation and translocation of PFASs within plant compartments including both structural properties of PFASs and physiological properties of plant species. Even though phytoremediation appears to be a promising remediation technique, some limitations that reduced the feasibility of phytoremediation in the practical application have been emphasized in previous studies. Additional research directions are suggested, including advanced genetic engineering techniques and endophyte-assisted phytoremediation to upgrade the phytoremediation potential of plants for the successful removal of PFASs.

Effect of solution chemistry on the transport of short-chain and long-chain perfluoroalkyl carboxylic acids (PFCAs) in saturated porous media

Perfluorocarboxylic acids (PFCAs) are one of the most widely detected classes of PFAS in the global environment after decades of intensive use. This study investigated the impact of perfluorinated carbon chain length on the transport behavior of PFCAs by testing and modeling two short-chain (PFPeA and PFHxA) and two long-chain PFCAs (PFOA and PFDA) in laboratory water-saturated columns. Moreover, their transport behavior was examined under different solution chemistry conditions, including pH, ionic strength, and cationic type. The experimental and simulation results indicated that the chain length had a limited impact on transport behaviors of PFPeA, PFHxA, and PFOA under various pH and ionic strengths, evidenced by their tracer-like breakthrough curves. In contrast, the mobility of PFDA was significantly affected by pH and ionic strengths. Additionally, the transport of all four PFCAs was inhabited in the presence of the divalent cation Ca²⁺. This study could help predict migration behavior and assess the potential risk of PFCAs in the subsurface system.

Occurrence, distribution, and input pathways of per- and polyfluoroalkyl substances in soils near different sources in Shanghai

Per- and polyfluoroalkyl substances (PFAS) are complex emerging pollutants that are widely distributed in soils. The compositions of PFAS vary according to the emission sources. However, the soil distributions of PFAS from different sources are still poorly understood. In this study, the concentrations and compositions of 18 PFAS in soils close to potential sources (industrial areas, airports, landfills, fire stations and agricultural areas) were investigated in Shanghai. The total PFAS concentrations varied from 0.64 to 294 μg kg^-1_d.w.. Among the sites, the highest PFAS concentration was found near the fire station (average = 57.9 μg kg^-1_d.w.), followed by the industrial area (average = 8.53 μg kg^-1_d.w.). The detection frequencies of the 18 PFAS ranged from 47.5% to 100%. Perfluorooctanoic acid (PFOA) and perfluoroheptanoic acid (PFHpA) were detected in all samples. The detection frequencies of PFAS near the fire station were higher than those near other sources. The PFAS in soils were mainly composed of short-chain perfluoroalkyl carboxylic acids (C ≤ 8). Elevated concentrations of long-chain perfluoroalkyl carboxylic acids (C > 12) were found in industrial area. Principal component analysis revealed that long-chain PFAS had different factor loadings compared to short-chain PFAS. With the exception of agricultural soils, the correlations between individual PFAS were more positive than negative. Strong positive correlations were found within three groups of perfluoroalkyl carboxylic acids (C5-C7, C9-C12, and C14-C18), suggesting their similar inputs and transportation pathways. The PFAS in soils around the fire station were likely directly emitted from a point source. In contrast, the PFAS in soils near the other sites had multiple input pathways, including both direct emission and precursor degradation.

Factors controlling soil organic carbon content in wetlands at multiple scales and assessment of the universality of estimation equations: A mega-data study

The factors controlling soil organic carbon (SOC) content in wetlands need to be identified to estimate the global stores of SOC. Although there have been a large number of small-scale studies of the local patterns of SOC content, global studies are still required. We used a random forest algorithm and other statistical approaches to determine the controls on the SOC content in wetlands at global, continental, and national scales based on the Harmonized World Soil Database and field data. The results showed that, at the three scales explored, the soil cation exchange capacity and bulk density were the main controls on the SOC content in wetlands. Moreover, equations for estimating global SOC content were established. To assess the universality of SOC content estimation equations, the soil properties were considered as a "community" and the normalized stochasticity ratio (NST) was used to assess the stochasticity in the assembly of soil "communities". The results showed that, globally, the interaction of these factors was stochastic in the "community" composed of the controllers and SOC. The reason for this result might be that microbes were not considered in the equation. Therefore, the weighted abundance of related microbes (WARM) was therefore recommended in the estimation of SOC. With NST and WARM factors, we found that microbes play a key role in increasing the determinacy of SOC estimation equations in wetlands with less anthropogenic contamination. Our findings show that when microbial impacts are taken into account, the patterns of SOC content in pristine wetlands are more universal. Our newly established equations for estimating global SOC content are crucial in projecting changes in wetland SOC, and the two factors indicated in this study favor the universality for SOC content estimation.

Estimation of Transport Parameters of Perfluoroalkyl Acids (PFAAs) in Unsaturated Porous Media: Critical Experimental and Modeling Improvements

Predicting the transport of perfluoroalkyl acids (PFAAs) in the vadose zone is critically important for PFAA site cleanup and risk mitigation. PFAAs exhibit several unusual and poorly understood transport behaviors, including partitioning to the air-water interface, which is currently the subject of debate. This study develops a novel use of quasi-saturated (residual air saturation) column experiments to estimate chemical partitioning parameters of both linear and branched perfluorooctane sulfonate (PFOS) in unsaturated soils. The ratio of linear-to-branched air-water interfacial partitioning constants for all six experiments was 1.62 ± 0.24, indicating significantly greater partitioning of linear PFOS isomers at the air-water interface. Standard breakthrough curve analysis and numerical inversion of HYDRUS models support the application of a Freundlich isotherm for PFOS air-water interfacial partitioning below a critical reference concentration (CRC). Data from this study and previously reported unsaturated column data on perfluorooctanoate (PFOA) were reevaluated to examine unsaturated systems for transport nonidealities. This reanalysis suggests both transport nonidealities and Freundlich isotherm behavior for PFOA below the CRC using drainage-based column methods, contrary to the assertions of the original authors. Finally, a combined Freundlich-Langmuir isotherm was proposed to describe PFAA air-water interfacial partitioning across the full range of relevant PFAA concentrations.

Acute Toxicity of Eight Aqueous Film-Forming Foams to 14 Aquatic Species

Researchers have developed numerous per- and polyfluoroalkyl substances (PFAS)-free aqueous film-forming foam (AFFF) formulations to replace PFAS-containing AFFF used for fire suppression. As part of the Department of Defense's Strategic Environmental Research and Development Program (SERDP), we examined the direct lethal effects of seven PFAS-free AFFF and a PFAS-containing AFFF on 14 aquatic species using a series of lethal concentration (LC50) tests. We assessed the LC10, LC50, and LC90 values using log-logistic and logit analyses. Across all aquatic species tested, we discovered that exposure to at least one PFAS-free AFFF was more or as toxic as exposure to the PFAS-containing AFFF. For most cases, National Foam Avio F3 Green KHC 3% and Buckeye Platinum Plus C6MILSPEC 3% were the most and least toxic formulations, respectively. Moreover, we found consistency among results from multiple experiments using the same minnow species (Pimephales promelas) and among closely related taxa (e.g., daphnids, amphibians). Lastly, the LC50 values for AFFF formulations trended lower for tested marine species as compared to those of freshwater species. These results dramatically increase the current knowledge on the potentially toxic effects of AFFF but also highlight the need for additional research and the development of new PFAS-free AFFF that are more "ecologically friendly" than those containing persistent PFAS.

Iron-Doped Bimodal Mesoporous Silica Nanomaterials as Sorbents for Solid-Phase Extraction of Perfluoroalkyl Substances in Environmental Water Samples

In this work, sorbets based on UVM-7 mesoporous silica doped with Fe were synthesized and applied to solid-phase extraction of perfluoroalkyl substances from environmental water samples. These emerging pollutants were then determined by liquid chromatography coupled with a mass spectrometry detector. Thus, Fe-UVM-7 mesoporous silica materials with different contents of iron, as well as different pore sizes (by using alkyltrimethilamonium bromide surfactants with different organic tail lengths) were synthesized, and their structure was confirmed for the first time by transmission electron microscopy, nitrogen adsorption–desorption, X-ray diffraction, and Raman spectroscopy. After comparison, Fe50-UVM-7-C₁₂ was selected as the best material for analyte retention, and several extraction parameters were optimized regarding the loading and elution step. Once the method was developed and applied to real matrices, extraction efficiencies in the range of 61–110% were obtained for analytes with C₈–C₁₄ chain length, both perfluoroalkyl carboxylates, and perfluoroalkyl sulfonates. Likewise, limits of detection in the range of 3.0–8.1 ng L⁻¹ were obtained for all target analytes. In the analysis of real well-water samples, no target compounds were detected. Spiked samples were analyzed in comparison to Oasis WAX cartridges, and statistically comparable results were achieved.

Occurrence of PFASs and its effect on soil bacteria at a fire-training area using PFOS-restricted aqueous film-forming foams

Fire-training areas (FTAs) are an important source of perfluoroalkyl and polyfluoroalkyl substances (PFASs) pollution. However, the effect of PFASs on soil bacterial communities remains limited. Here, we detected the PFASs in soils ranging from 3.4 to 531.7 μg kg⁻¹ dry weight in seven plots at an FTA where PFOS-restricted aqueous film-forming foams (AFFFs) have been used for 6 years. PFOS was still the dominant homologue despite the restriction by Stockholm Convention, but it was almost three orders of magnitude lower than that in previous studies. PFASs played an important role in shaping the bacterial community, and high levels of PFASs (>100 μg kg⁻¹ dw) reduced the biodiversity and connectivity of soil bacteria. The extreme condition-tolerant bacteria were identified as biomarkers at the FTA. Our study provides valuable insights into the effect of PFOS-restricted AFFFs on soil bacterial communities at the FTA.

•

PFOS was still the dominant PFAS despite the restriction by Stockholm Convention

•

PFASs played an important role in shaping bacterial community

•

High level of PFASs reduced the biodiversity and connectivity of soil bacteria

•

The extreme condition-tolerant bacteria were identified as biomarkers at the FTA

Per- and polyfluoroalkyl substances in water and wastewater: A critical review of their global occurrence and distribution

Per- and polyfluoroalkyl substances (PFAS) are a family of fluorinated organic compounds of anthropogenic origin. Due to their unique chemical properties, widespread production, environmental distribution, long-term persistence, bioaccumulative potential, and associated risks for human health, PFAS have been classified as persistent organic pollutants of significant concern. Scientific evidence from the last several decades suggests that their widespread occurrence in the environment correlates with adverse effects on human health and ecology. The presence of PFAS in the aquatic environment demonstrates a close link between the anthroposphere and the hydrological cycle, and concentrations of PFAS in surface and groundwater range in value along the ng L^-1-μg L^-1 scale. Here, we critically reviewed the research published in the last decade on the global occurrence and distribution of PFAS in the aquatic environment. Ours is the first paper to critically evaluate the occurrence of PFAS at the continental scale and the evolving global regulatory responses to manage and mitigate the adverse human health risks posed by PFAS. The review reports that PFAS are widespread despite being phased out-they have been detected in different continents irrespective of the level of industrial development. Their occurrence far from the potential sources suggests that long-range atmospheric transport is an important pathway of PFAS distribution. Recently, several studies have investigated the health impacts of PFAS exposure-they have been detected in biota, drinking water, food, air, and human serum. In response to the emerging information about PFAS toxicity, several countries have provided administrative guidelines for PFAS in water, including Canada, the United Kingdom, Sweden, Norway, Germany, and Australia. In the US, additional regulatory measures are under consideration. Further, many PFAS have now been listed as persistent organic pollutants. This comprehensive review provides crucial baseline information on the global occurrence, distribution, and regulatory framework of PFAS.

PFAS Analysis with Ultrahigh Resolution 21T FT-ICR MS: Suspect and Nontargeted Screening with Unrivaled Mass Resolving Power and Accuracy

Per- and polyfluoroalkyl substances (PFASs) are a large family of thousands of chemicals, many of which have been identified using nontargeted time-of-flight and Orbitrap mass spectrometry methods. Comprehensive characterization of complex PFAS mixtures is critical to assess their environmental transport, transformation, exposure, and uptake. Because 21 tesla (T) Fourier-transform ion cyclotron resonance mass spectrometry (FT-ICR MS) offers the highest available mass resolving power and sub-ppm mass errors across a wide molecular weight range, we developed a nontargeted 21 T FT-ICR MS method to screen for PFASs in an aqueous film-forming foam (AFFF) using suspect screening, a targeted formula database (C, H, Cl, F, N, O, P, S; ≤865 Da), isotopologues, and Kendrick-analogous mass difference networks (KAMDNs). False-positive PFAS identifications in a natural organic matter (NOM) sample, which served as the negative control, suggested that a minimum length of 3 should be imposed when annotating CF₂-homologous series with positive mass defects. We putatively identified 163 known PFASs during suspect screening, as well as 134 novel PFASs during nontargeted screening, including a suspected polyethoxylated perfluoroalkane sulfonamide series. This study shows that 21 T FT-ICR MS analysis can provide unique insights into complex PFAS composition and expand our understanding of PFAS chemistries in impacted matrices.

Reduced bioaccumulation of fluorotelomer sulfonates and perfluoroalkyl acids in earthworms (Eisenia fetida) from soils amended with modified clays

Soils contaminated by per- and polyfluoroalkyl substances (PFAS) pose long-term sources to adjacent water bodies and soil invertebrates. The study investigated the stabilization using a modified clay adsorbent (FLUORO-SORB100®) in reducing the bioaccumulation of 13 anionic PFAS by earthworms (Eisenia fetida), as compared to coal-based granular activated carbon. The target PFAS included four perfluoroalkyl sulfonates such as perfluorooctane sulfonate (PFOS), six perfluoroalkyl carboxylates (e.g., perfluorooctanoate PFOA), and three (X:2) fluorotelomer sulfonates. Laboratory-spiked surface soil and the soil collected from a site contaminated by aqueous film-forming foams were examined. Both adsorbents resulted in reduced earthworm PFAS body burdens at the end of the 28-day uptake phase. The highest adsorbent amendment concentration (4 w/w%) was most effective, achieving >95% reduction of PFAS body burden. Soil leaching tests indicated better immobilization performance by the clay adsorbent for most analytes; in comparison, the activated carbon performed better at reducing total PFAS body burdens, possibly owing to the avoidance of larger-sized particles by earthworms. Strong positive logarithm relationships were observed between leachate concentrations and earthworm body burdens for most PFAS in the spiked soil. The study demonstrated that stabilization of PFAS using modified clay adsorbents can achieve concurrent benefits of lowering leachability and reducing bioaccumulation.

Per- and Polyfluoroalkyl Substances in Contaminated Soil and Groundwater at Airports: A Canadian Case Study

The occurrence of 93 classes of per- and polyfluoroalkyl substances (PFASs) was investigated at aqueous film-forming foam (AFFF)-impacted sites of four Canadian airports. Surface/subsurface soil and groundwater samples were characterized using high-resolution mass spectrometry (HRMS) and an improved total oxidizable precursor (TOP) assay. PFAS profiles, loads, and spatial trends were highly site-specific, influenced by the AFFF use history, variations in sorption, transport, and in situ transformation potential of PFASs. All sites have been impacted by more than one AFFF chemistry, with the active firefighter training area exhibiting a greater PFAS variety and total PFAS burden than decommissioned sites. Zwitterionic and cationic compounds composed a large percentage (34.5-85.5%) of the total PFAS mass in most surface soil samples in the source zone but a relatively low percentage (<20%) in groundwater samples. Background soils surrounding the source zone contained predominantly unidentified precursors attributed to atmospheric deposition, while in AFFF-impacted soils, precursors originating from AFFFs can be largely captured by HRMS using available suspect lists. Horizontal transfer of PFASs in surface soils was limited, but vertical migration down the soil column occurred even in locations of low permeability. This study provides a critical data set to support developing new priority analyte lists and integrating TOP assay for comprehensive PFAS monitoring at AFFF-impacted sites.