Behavior of engineered nanoparticles in aquatic environmental samples: Current status and challenges

Comparison of microplastics heteroaggregation with MoS2 and graphene oxide nanosheets: Dependence on the configuration and impacts on aquatic transport

Understanding the behavior and fate of microplastics (MPs) in aquatic environment is crucial for assessing their potential risks. This study investigated the heteroaggregation behaviors of MPs with representative 2D nanosheets, MoS2 and graphene oxide (GO), under various conditions, focusing on the transport behavior of the resulting aggregates. It was found that the destabilization capabilities of 2D nanosheets are notably stronger than those of well-reported nanoparticles. More importantly, the deposition and transport of MPs are highly dependent on the configuration of the resulting aggregates. MoS2 nanosheets conformally coat MPs, forming compact and colloidally stable complexes that completely alter the MPs' surface to the negatively charged MoS2. The interaction resulted in high mobility and minimal deposition in environmental matrices. In contrast, GO nanosheets bridge MPs into large clusters, reducing transport and increasing deposition. This difference in aggregate configuration is attributed to the distinct interactions between the nanosheets and MPs: rigid MoS2 nanosheets adhere via strong van der Waals forces, while GO, with oxygen functional groups on its edges and surfaces, folds and crosslinks between particles upon adsorption. These findings underscore the critical role of 2D materials in shaping the environmental fate of MPs, advancing our knowledge on the aggregation process.

Phytoremediation of nanoparticles, as future water pollutants, using aquatic and wetland plants: Feasibility, benefits and risks, and research gaps

The widespread use of nanoparticles (NPs) in recent years and their rapid accumulation as potentially dangerous pollutants can lead to significant environmental risks. Different methods are used to eliminate emerging contaminants such as NPs from aquatic environments. Of these methods, phytoremediation using aquatic and wetland plants (WAPs) is considered the most suitable approach because of their extensive root systems, high rates of biomass production, ability to thrive in diverse habitats, and rapid growth within aquatic ecosystems. Various species of genera Lemna, Salvinia, Spirodela, Phragmites, Elodea, and Pistia have been studied for their potential to remediate NPs or contaminants released by NPs. The findings of the review indicate that the majority of WAPs cannot accumulate NPs within their tissues. Nevertheless, the effective methods for removing NPs from the environment by WAPs involve the surface adsorption of NPs onto their roots and the accumulation of pollutants released by NPs within the plant tissues. In addition to the benefits of NPs phytoremediation through WAPs, including sustainability, efficiency, and affordability, there are risks to consider, such as the potential transfer of NPs into the food chain, the release of toxic compounds from NPs due to (bio)degradation, and interactions between contaminated WAPs and other ecosystem components. Furthermore, several research gaps need to be addressed in the future, including a scarcity of field studies, a limited focus on NP types and plant species, unrealistic NP concentration, comparisons with bulk materials, the use of additives and amendments, and the genetic engineering of WAPs.

Influence of Tetrabromobisphenol-A on the Fate and Behavior of Zinc Oxide Nanoparticles Affected by Salts, Humic Acid, and Bovine Serum Albumin in Water Systems

The environmental release of zinc oxide nanoparticles (ZnO-NPs) may have consequences for ecosystems. The behavior and environmental effects of ZnO-NPs could change due to their interactions with other existing substances. This research explored how the presence of coexisting organic pollutants (like tetrabromobisphenol-A (TBBPA)), electrolytes (such as NaCl and CaCl2), natural organic materials (including humic acid (HA)), and bovine serum albumin (BSA) in simulated water affected the behavior of ZnO-NPs. Various characterization techniques were used to analyze the size, shape, purity, crystallinity, and surface charge of ZnO-NPs following interactions (after one day, one week, two weeks, and three weeks) at pH 7. The findings demonstrated changes in both the size and zeta potential of the ZnO-NPs in isolation and when TBBPA and electrolytes were included in the suspension. The size and surface charge exhibited different variations across fixed concentrations (5 mM) of various electrolytes. HA and BSA contributed to the dispersion of ZnO-NPs by affecting the zeta potential. These dispersion effects were also observed in the presence of TBBPA and salts, attributed to their substantial aliphatic carbon content and complex structures. Potential interaction forces that could explain the adsorption of TBBPA include cation bridging, hydrophobic interactions, hydrogen bonding, electrostatic interactions, and van der Waals forces. The co-occurrence of organic pollutants (TBBPA) and natural organic compounds (HA and BSA) can alter the surface properties and behavior of ZnO-NPs in natural and seawater, aiding in the understanding of the fate and impact of engineered nanoparticles (such as ZnO-NPs) in the environment.

Copper oxide nanoparticles induced reactive oxygen species generation: A systematic review and meta-analysis

Copper oxide nanoparticles (CuO NPs) are widely employed in various industrial and biomedical applications owing to their enhanced physicochemical characteristics. However, concerns regarding their adverse effects on biological systems upon entering the environment remain unexplored. The generation of reactive oxygen species (ROS) is one of the primary mechanisms in CuO NPs induced toxicity. This meta-analysis was conducted to assess the associative link between CuO NPs exposure and ROS generation. A literature survey was performed in PubMed, Web of Science, Scopus, and Google Scholar, following PRISMA guidelines. After comprehensive initial and primary screening, 28 in vitro studies were selected for meta-analysis. Overall, our results show a substantial increase of ROS in the experimental group when compared to control (SMD = 3.3; 95 % CI: 2.82-3.77, p = 0.00001), with substantial heterogeneity (82 %). Subgroup analysis revealed that larger-sized NPs, higher dosages, and longer exposure duration were associated with ROS generation. Meta-regression analysis identified size, and dosage as significant factors influencing ROS levels. Sensitivity analysis revealed an outlier study and the funnel plot results suggested potential publication bias. Overall, our results provide valuable insights of CuO NPs induced ROS generation, and the relation of variables such as size, dose, and duration in nanotoxicity assessments.

Microplastics enhance the adsorption capacity of zinc oxide nanoparticles: Interactive mechanisms and influence factors

Microplastics (MPs) are of particular concern due to their ubiquitous occurrence and propensity to interact and concentrate various waterborne contaminants from aqueous surroundings. Studies on the interaction and joint toxicity of MPs on engineered nanoparticles (ENPs) are exhaustive, but limited research on the effect of MPs on the properties of ENPs in multi-solute systems. Here, the effect of MPs on adsorption ability of ENPs to antibiotics was investigated for the first time. The results demonstrated that MPs enhanced the adsorption affinity of ENPs to antibiotics and MPs before and after aging showed different effects on ENPs. Aged polyamide prevented aggregation of ZnONPs by introducing negative charges, whereas virgin polyamide affected ZnONPs with the help of electrostatic attraction. FT-IR and XPS analyses were used to probe the physicochemical interactions between ENPs and MPs. The results showed no chemical interaction and electrostatic interaction was the dominant force between them. Furthermore, the adsorption rate of antibiotics positively correlated with pH and humic acid but exhibited a negative correlation with ionic strength. Our study highlights that ENPs are highly capable of accumulating and transporting antibiotics in the presence of MPs, which could result in a widespread distribution of antibiotics and an expansion of their environmental risks and toxic effects on biota. It also improves our understanding of the mutual interaction of various co-existing contaminants in aqueous environments.

Distribution characteristics of TiO2 NPs in Daihai lake and their stability regulated by abiotic factors

Accurate detection and stability analysis of titanium dioxide (TiO2 NPs) in surface water are critical for ecological risk assessment. Quantitative analysis of TiO2 NPs in water and sediment of Daihai Lake was performed and their occurrence forms was characterized by TEM, XRD and FTIR. Further investigation into the impact of pH, ionic strength (IS) and dissolved organic matter (DOM) on the stability of TiO2 NPs was carried out, along with a correlation analysis between abiotic factors and TiO2 NPs concentration. Results showed that TiO2 NPs in water and sediment are 1.01 × 105 and 5.66 × 105 particles/mL in July 2023, respectively. After transformed in water sample from Daihai Lake, the hydrodynamic particle (HDD) of TiO2 NPs reach 600-700 nm, with reduced crystallinity and observable characteristic peaks of NaCl, which is related to the high concentration of NaCl in Daihai Lake. Structural defects and changes in surface properties of TiO2 NPs are introduced due to the adsorption of organic matter, leading to higher aggregation and sedimentation rates. Specifically, Ca2+ promote the sedimentation of TiO2 NPs more than Na+. Conversely, A/A0 increased to 0.80-0.94 from 0.64 after humic acid (HA) and fulvic acid (FA) added. Hydroxyl and carboxyl groups of FA enhanced steric hindrance and inhibited TiO2 NPs sedimentation. While a strong promotion effect on the sedimentation of TiO2 NPs is detected when 10 mmol/L Ca2+ coexisted with 10 mg/L HA, with 70% of the TiO2 NPs settled within 120 min. Additionally, the concentration of TiO2 NPs in Daihai Lake is significantly positively correlated with dissolved organic carbon (DOC) and humification index, which might be relate to the enhancement of TiO2 NPs stability of aromatic organic matter. And the high concentration of DOC will also lead to the stable existence of TiO2 NPs in water and exacerbate aquatic toxicity.

Emerging contaminants: A One Health perspective

Environmental pollution is escalating due to rapid global development that often prioritizes human needs over planetary health. Despite global efforts to mitigate legacy pollutants, the continuous introduction of new substances remains a major threat to both people and the planet. In response, global initiatives are focusing on risk assessment and regulation of emerging contaminants, as demonstrated by the ongoing efforts to establish the UN's Intergovernmental Science-Policy Panel on Chemicals, Waste, and Pollution Prevention. This review identifies the sources and impacts of emerging contaminants on planetary health, emphasizing the importance of adopting a One Health approach. Strategies for monitoring and addressing these pollutants are discussed, underscoring the need for robust and socially equitable environmental policies at both regional and international levels. Urgent actions are needed to transition toward sustainable pollution management practices to safeguard our planet for future generations.

Developmental impacts and toxicological hallmarks of silver nanoparticles across diverse biological models

Silver nanoparticles (AgNPs), revered for their antimicrobial prowess, have become ubiquitous in a range of products, from biomedical equipment to food packaging. However, amidst their rising popularity, concerns loom over their possible detrimental effects on fetal development and subsequent adult life. This review delves into the developmental toxicity of AgNPs across diverse models, from aquatic species like zebrafish and catfish to mammalian rodents and in vitro embryonic stem cells. Our focus encompasses the fate of AgNPs in different contexts, elucidating associated hazardous results such as embryotoxicity and adverse pregnancy outcomes. Furthermore, we scrutinize the enduring adverse impacts on offspring, spanning impaired neurobehavior function, reproductive disorders, cardiopulmonary lesions, and hepatotoxicity. Key hallmarks of developmental harm are identified, encompassing redox imbalances, inflammatory cascades, DNA damage, and mitochondrial stress. Notably, we explore potential explanations, linking immunoregulatory dysfunction and disrupted epigenetic modifications to AgNPs-induced developmental failures. Despite substantial progress, our understanding of the developmental risks posed by AgNPs remains incomplete, underscoring the urgency of further research in this critical area.

Effects of Mixtures of Engineered Nanoparticles and Cocontaminants on Anaerobic Digestion

The widespread application of nanotechnology inevitably leads to an increased release of engineered nanoparticles (ENPs) into the environment. Due to their specific physicochemical properties, ENPs may interact with other contaminants and exert combined effects on the microbial community and metabolism of anaerobic digestion (AD), an important process for organic waste reduction, stabilization, and bioenergy recovery. However, the complicated interactions between ENPs and other contaminants as well as their combined effects on AD are often overlooked. This review therefore focuses on the co-occurrence of ENPs and cocontaminants in the AD process. The key interactions between ENPs and cocontaminants and their combined influences on AD are summarized from the available literature, including the critical mechanisms and influencing factors. Some sulfides, coagulants, and chelating agents have a dramatic "detoxification" effect on the inhibition effect of ENPs on AD. However, some antibiotics and surfactants increase the inhibition of ENPs on AD. The reasons for these differences may be related to the interactive effects between ENPs and cocontaminants, changes of key enzyme activities, adenosine triphosphate (ATP) levels, reactive oxygen species (ROS) production, and microbial communities. New scientific opportunities for a better understanding of the coexistence in real world situations are converging on the scale of nanoparticles.

Catching nano: Evaluating the fate and behaviour of nano-TiO2 in swimming pools through dynamic simulation modelling

Engineered titanium dioxide nanoparticles (nano-TiO2) in consumer products such as sunscreens widely used by swimmers in aquatic settings have raised concerns about their potential adverse impact on ecosystems and human health due to their small size and unique physicochemical properties. Therefore, this research paper aims to investigate the fate and behaviour of nano-TiO2 from sunscreens in swimming pools using System Dynamics Modelling. The study developed a dynamic simulation model that considers various factors, including weather conditions, sunscreen and pool usage behaviour, filtration efficacy, pool maintenance, water chemistry, pool chemicals, and TiO2 concentration levels, which can affect exposure levels for different scenarios. The study considered non-linear interdependent relationships, feedback structures, and temporal changes and dealt with parameter uncertainties through Monte Carlo analyses. The results reveal that the regular use of sunscreen leads to nano-TiO2 concentrations ranging from 0.001 to 0.05 mg/L within a year, reflecting seasonal and pool usage variations. The study also found that changes in the weight percentage of TiO2 in the sunscreen formulation and the filtration duration per day are the most sensitive factors affecting TiO2 concentrations. Scenario analyses exploring different nano-TiO2 removal strategies suggested that one daily turnover is necessary for sufficient removal. Regular manual pool maintenance and monthly use of a pool clarifier are recommended for enhanced and accelerated removal without substantial additional costs. The study is novel in its integrated approach, combining empirical work with dynamic simulations, resulting in a novel approach to model the environmental fate and behaviour of nano-TiO2. The study makes important methodological contributions to the field and has initiated an interdisciplinary collaboration to create more accurate models. This study is of great significance as it presents a pioneering analysis of the impact of sunscreen properties, user behaviour, and environmental stressors on the fate and behaviour of nano-TiO2 in swimming pools.

Insight interactions of engineered nanoparticles with aquatic higher plants for phytoaccumulation, phytotoxicity, and phytoremediation applications: A review

With the growing age of human civilization, industrialization has paced up equally which is followed by the innovation of newer concepts of science and technology. One such example is the invention of engineered nanoparticles and their flagrant use in widespread applications. While ENPs serve their intended purposes, they also disrupt the ecological balance by contaminating pristine aquatic ecosystems. This review encompasses a comprehensive discussion about the potent toxicity of ENPs on aquatic ecosystems, with a particular focus on their impact on aquatic higher plants. The discussion extends to elucidating the fate of ENPs upon release into aquatic environments, covering aspects ranging from morphological and physiological effects to molecular-level phytotoxicity. Furthermore, this level of toxicity has been correlated with the determination of competent plants for the phytoremediation process towards the mitigation of this ecological stress. However, this review further illustrates the path of future research which is yet to be explored. Determination of the genotoxicity level of aquatic higher plants could explain the entire process comprehensively. Moreover, to make it suitable to be used in natural ecosystems phytoremediation potential of co-existing plant species along with the presence of different ENPs need to be evaluated. This literature will undoubtedly offer readers a comprehensive understanding of the stress induced by the irresponsible release of engineered nanoparticles (ENP) into aquatic environments, along with insights into the resilience characteristics of these pristine ecosystems.

Effects of Cr(VI) oxyanion, humic acid and solution chemistry on the aggregation and colloidal stability of green synthesized chlorapatite nanoparticles

Aggregation is a crucial process determining the fate, mobility and ecological risks of nanomaterials. Chlorapatite nanoparticles (nClAP) exhibit widely applications in environmental remediation and consequently will inevitably enter aquatic systems. However, the aggregation characteristics of nClAP are still mostly uncovered. This study investigated the aggregation kinetics and colloidal stability of nClAP as a function of pH, humic acid (HA), Cr(VI) oxyanions, monovalent and divalent electrolytes. Results showed that pH values from 5 to 9 had a notable impact on the aqueous behaviors of nClAP. The addition of HA made the zeta potential (ZP) of nClAP more negative and thus enhanced nClAP stability through electrostatic and steric effects. Similarly, the adsorption of Cr(VI) on the surface of nClAP created a physical barrier and negative charge, improving the stability of nClAP by inducing steric force. Lower ZP and hydrodynamic diameter (HDD) reflected that the enhanced stability of nClAP by HA was more significant than Cr(VI). In comparison, the presence of Ca2+ ions were more effective than monovalent Na + ions in promoting the aggregation of nClAP. The classical DLVO theory incorporating the steric repulsion were used to interpret the aggregation and dispersion of nClAP, making it was easier to overcome energy barriers and agglomerate. This study provides new mechanistic insights which could help better understand the effects of Cr(VI) oxyanions and HA on nClAP's colloidal stability.

Effects of Different Nanoparticles on Microbes

Nanoparticles widely exist in nature and may be formed through inorganic or organic pathways, exhibiting unique physical and chemical properties different from those of bulk materials. However, little is known about the potential consequences of nanomaterials on microbes in natural environments. Herein, we investigated the interactions between microbes and nanoparticles by performing experiments on the inhibition effects of gold, ludox and laponite nanoparticles on Escherichia coli in liquid Luria-Bertani (LB) medium at different nanoparticle concentrations. These nanoparticles were shown to be effective bactericides. Scanning electron microscopy (SEM) images revealed the distinct aggregation of cells and nanoparticles. Transmission electron microscopy (TEM) images showed considerable cell membrane disruption due to nanoparticle accumulation on the cell surfaces, resulting in cell death. We hypothesized that this nanoparticle accumulation on the cell surfaces not only disrupted the cell membranes but also physically blocked the microbes from accessing nutrients. An iron-reducing bacterium, Shewanella putrefaciens, was tested for its ability to reduce the Fe (III) in solid ferrihydrite (HFO) or aqueous ferric citrate in the presence of laponite nanoparticles. It was found that the laponite nanoparticles inhibited the reduction of the Fe (III) in solid ferrihydrite. Moreover, direct contact between the cells and solid Fe (III) coated with the laponite nanoparticles was physically blocked, as confirmed by SEM images and particle size measurements. However, the laponite particles had an insignificant effect on the extent of aqueous Fe (III) bioreduction but slightly enhanced the rate of bioreduction of the Fe (III) in aqueous ferric citrate. The slightly increased rate of bioreduction by laponite nanoparticles may be due to the removal of inhibitory Fe (II) from the cell surface by its sorption onto the laponite nanoparticle surface. This result indicates that the scavenging of toxic heavy metals, such as Fe (II), by nanoparticles may be beneficial for microbes in the environment. On the other hand, microbial cells are also capable of detoxifying nanoparticles by coagulating nanoparticles with extracellular polymeric substances or by changing nanoparticle morphologies. Hence, the interactions between microbes and nanoparticles in natural environments should receive more attention.

Accumulation, Chronicity, and Induction of Oxidative Stress Regulating Genes Through Allium cepa L. Functionalized Silver Nanoparticles in Freshwater Common Carp (Cyprinus carpio)

Green evolutionary products such as biologically fabricated nanoparticles (NPs) pose a hazard to aquatic creatures. Herein, biogenic silver nanoparticles (AgNPs) were synthesized by the reaction between ionic silver (AgNO₃) and aqueous onion peel extract (Allium cepa L). The synthesized biogenic AgNPs were characterized with UV-Visible spectrophotometer, XRD, FT-IR, and TEM with EDS analysis; then, their toxicity was assessed on common carp fish (Cyprinus carpio) using biomarkers of haematological alterations, oxidative stress, histological changes, differential gene expression patterns, and bioaccumulation. The 96 h lethal toxicity was analysed with various concentrations (2, 4, 6, 8, and 10 mg/l) of biogenic AgNPs. Based on 96 h LC₅₀, sublethal concentrations (1/15^th, 1/10^th, and 1/5^th) were given to C. carpio for 28 days. At the end of experiment, the bioaccumulations of Ag content were accumulated mainly in the gills, followed by the liver and muscle. At an interval of 7 days, the haematological alterations showed significance (p < 0.05) and elevation of antioxidant defence mechanism reveals the toxicity of biogenic synthesized AgNPs. Adverse effects on oxidative stress were probably related to the histopathological damage of its vital organs like gill, liver, and muscle. Finally, the fish treated with biogenic synthesized AgNPs were significantly (p < 0.05) downregulates the oxidative stress genes such as Cu-Zn SOD, CAT, GPx1a, GST-α, CYP1A, and Nrf-2 expression patterns. The present study provides evidence of biogenic synthesized AgNPs influence on the aquatic life through induction of oxidative stress.

Theoretical basis and experimental verification for evaluating the distribution of engineered nanoparticles in water-oil system

The distribution of nanoparticles between aqueous and organic phases is universally considered as the starting point in predicting the fate and bioavailability of engineered nanoparticles in the environment. However, the theoretical basis for determining the distribution of nanoparticles in the immiscible water-oil system remains unclear. Here, for the first time, theoretical calculations were conducted to illustrate the underlying mechanism. It was suggested that the distribution of nanoparticles was largely controlled by the surface charge, particle size and surface hydrophobicity, and the water-oil interface was not the favorable phase for nanoparticles until a size threshold (10 nm) was met and the particle surface became amphiphilic. The theoretical results were verified by the experimental approaches of different nanoparticles distributed in the water-octanol mixture. The neutralization of a charged surface led to enhanced distribution into octanol for hydrophobic nanoparticles (e.g., aqueous C₆₀), yet it had little effect on hydrophilic nanoparticles (e.g., fullerol). More nanoparticles were trapped at the water-oil interface when size grew larger (e.g., Ag-CIT and Au-CIT with citrate) and the surface rendered amphiphilic by polymeric coatings (e.g., Ag-PVP with polyvinylpyrrolidone), though larger hydrophobic nanoparticles like aqu-nC₆₀ tended to stay in the octanol. The surface charge and hydrophobicity may have an important impact on the path-dependent distribution of nanoparticles in water- octanol system. The mechanistic insights based on theoretical calculations and experimental approaches will facilitate the accurate prediction of the distribution of engineered nanoparticles in biological and environmental systems.

Nanomaterials to address the genesis of antibiotic resistance in Escherichia coli

Escherichia is a genus of prokaryotic gram-negative bacteria which forms a vital component of the gut microbiota of homeotherms including humans. Many members of this genus are commensals and pathogenic strains, which are responsible for some of the most common bacterial infections and can be fatal, particularly in the case of newborns and children. The fecal matter in wastewater treatment plants serves as major environmental sinks for the accumulation of Escherichia. The rise in antibiotic pollution and the lateral gene exchange of antibiotic-resistant genes have created antibiotic-resistant Escherichia strains that are often called superbugs. Antibiotic resistance has reached a crisis level that nowadays existing antibiotics are no longer effective. One way of tackling this emerging concern is by using nanomaterials. Punitively, nanomaterials can be used by conjugating with antibodies, biomolecules, and peptides to reduce antibiotic usage, whereas, preventatively, they can be used as either nano-antimicrobial additives or nano-photocatalytic sheets to reduce the microbial population and target the superbugs of environmental Escherichia. In this review, we have explored the threat posed by pathogenic Escherichia strains in the environment, especially in the context of antibiotic-resistant strains. Along with this, we have discussed some nanomaterial-mediated strategies in which the problem can be addressed by using nanomaterials as nanophotocatalytics, antimicrobial additives, drugs, and drug conjugates. This review also presents a brief overview of the ecological threats posed by the overuse of nanomaterials which warrants a balanced and judicious approach to the problem.

Application and mechanisms of metal-based nanoparticles in the control of bacterial and fungal crop diseases

Nanotechnology is a young branch of the discipline generated by nanomaterials. Its development has greatly contributed to technological progress and product innovation in the field of agriculture. The antimicrobial properties of nanoparticles (NPs) can be used to develop nanopesticides for plant protection. Plant diseases caused by bacterial and fungal infestations are the main types of crop diseases. Once infected, they will seriously threaten crop growth, reduce yield and quality, and affect food safety, posing a health risk to humans. We reviewed the application of metal-based nanoparticles in inhibiting plant pathogenic bacteria and fungi, and discuss the antibacterial mechanisms of metal-based nanoparticles from two aspects: the direct interaction between nanoparticles and pathogens, and the indirect effects of inducing plant resilience to disease. © 2022 Society of Chemical Industry.

The critical role of nanoparticle sizes in the interactions between gold nanoparticles and ABC transporters in zebrafish embryos

Despite the increasing evidences for adenosine triphosphate-binding cassette (ABC transporters)-mediated efflux of nanoparticles, the universality of these phenomena and the determining factors for the process remained to be clarified. This paper aimed to systemically investigate the role of nanoparticle size in the interactions between adenosine triphosphate-binding cassette (ABC transporters) and gold nanoparticles (AuNPs, 3 nm, 19 nm, and 84 nm, named as Au-3, Au-19, and Au-84) in zebrafish embryos. The results showed that all the three AuNPs induced significant toxicity as reflected by delayed hatching of embryos, decreased glutathione (GSH) contents, and increased reactive oxygen species (ROS) levels. Under the hindrance of embryo chorions, smaller AuNPs could more easily accumulate in the embryos, causing higher toxicity. Addition of transporter inhibitors enhanced the accumulation and toxicity of Au-3 and Au-19, and these nanoparticles induced the expressions of abcc2 and abcb4, indicating a fact that Au-3 and Au-19 were the potential substrates of ABC transporters, but these phenomena were barely found for Au-84. On the contrary, Au-84 suppressed the gene expressions of various ABC transporters like abcc1, abcg5, and abcg8. With specific suppressors, transcription factors like nuclear factor-erythroid 2-related factor-2 (Nrf2) and pregnane X receptor (Pxr) were found to be important in the induction of ABC transporters by AuNPs. After all, these results revealed a vital role of nanoparticle sizes in the interactions between ABC transporters and AuNPs in zebrafish embryos, and the critical size could be around 19 nm. Such information would be beneficial in assessing the environmental risk of nanoparticles, as well as their interactions with other chemical toxicants.

Dispersion and Aggregation Fate of Individual and Co-Existing Metal Nanoparticles under Environmental Aqueous Suspension Conditions

The use of diverse metal nanoparticles (MNPs) in a wide range of commercial products has led to their co-existence in the aqueous environment. The current study explores the dispersion and aggregation fate of five prominent MNPs (silver, copper, iron, nickel, and titanium), in both their individual and co-existing forms. We address a knowledge gap regarding their environmental fate under turbulent condition akin to flowing rivers. We present tandem analytical techniques based on dynamic light scattering, ultraviolet-visible spectroscopy, and inductively coupled plasma atomic emission spectroscopy for discerning their dispersion behavior under residence times of turbulence, ranging from 0.25 to 4 h. The MNPs displayed a multimodal trend for dispersion and aggregation behavior with suspension time in aqueous samples. The extent of dispersion was variable and depended upon intrinsic properties of MNPs. However, the co-existing MNPs displayed a dominant hetero-aggregation effect, independent of the residence times. Further research with use of real-world environmental samples can provide additional insights on the effects of sample chemistry on MNPs fate.

A Simple Model to Estimate the Number of Metal Engineered Nanoparticles in Samples Using Inductively Coupled Plasma Optical Emission Spectrometry

Accurate determination of the size and the number of nanoparticles plays an important role in many different environmental studies of nanomaterials, such as fate, toxicity, and occurrence in general. This work presents an accurate model that estimates the number of nanoparticles from the mass and molar concentration of gold nanoparticles (AuNPs) in water. Citrate-capped AuNPs were synthesized and characterized using transmission electron microscopy (TEM) and ultraviolet–visible spectroscopy (UV-vis). A mimic of environmental matrices was achieved by spiking sediments with AuNPs, extracted with leachate, and separated from the bulk matrix using centrifuge and phase transfer separation techniques. The quantification of AuNPs’ molar concentration on the extracted residues was achieved by inductively coupled plasma optical emission spectroscopy (ICP-OES). The molar concentrations, an average diameter of 27 nm, and the colloidal suspension volumes of AuNPs enable the calculation of the number of nanoparticles in separated residues. The plot of the number of AuNPs against the mass of AuNPs yielded a simple linear model that was used to estimate the number of nanoparticles in the sample using ICP-OES. According to the authors’ knowledge, this is the first adaptation of the gravimetric method to ICP-OES for estimating the number of nanoparticles after separation with phase transfer.

Quantifying impacts of titanium dioxide nanoparticles on natural assemblages of riverine phytobenthos and phytoplankton in an outdoor setting

Impacts of widespread release of engineered titanium dioxide nanoparticles (nTiO₂) on freshwater phytoplankton and phytobenthic assemblages in the field, represents a significant knowledge gap. Using outdoor experiments, we quantified impacts of nTiO₂ on phytoplankton and periphyton from UK rivers, applied at levels representative of environmentally realistic concentrations (0.05 mg/L) and hot spots of accumulation (5.0 mg/L). Addition of nTiO₂ to river water led to rapid temporal size changes in homoagglomerates and many heteroaggregates of nTiO₂ with cells in the phytoplankton, including green algae, pennate and centric diatoms, increasing settlement of some cells. Changes in phytoplankton composition were evident after 72-h resulting from a significant decline in the relative abundance of very small phytoplankton cells (1-3 μm), often accompanied by increases in centric diatoms at both concentrations. Significant changes detected in the composition of the phytobenthos after 12 days, following nTiO₂ treatments, were not evident when using benthic diatoms alone after 56 days. A lack of inhibition in the maximum quantum yield (Fv/Fm) in phytobenthos after 72-h exposures contrasted with a significant inhibition in Fv/Fm in 75% of phytoplankton samples, the highest recorded in Rutile nTiO₂ exposures at both concentrations of nTiO₂. After 12 days, strong positive stimulatory responses were recorded in the maximum relative electron transport rate (rETR_max) and the maximum non-photochemical coefficient (NPQ_max), in phytoplankton and phytobenthos samples exposed to the higher Anatase nTiO₂ concentration, were not measured in Rutile exposed biota. Collectively, these results indicate that the Rutile phase of nTiO₂ has more negative impacts on freshwater algae than the Anatase form, at specific time scales, and phytoplankton may be more impacted by nTiO₂ than phytobenthos. We caution that repeated release of nTiO₂, could lead to significant changes in riverine algal biomass and species composition, dependent on the phase and concentration of nTiO₂.

Colloidal stability and aggregation kinetics of nanocrystal CdSe/ZnS quantum dots in aqueous systems: Effects of ionic strength, electrolyte type, and natural organic matter

Understanding the stability and aggregation of nanoparticles in aqueous milieu is critical for assessing their behavior in the natural and engineered environmental systems and establishing their threat to human and ecosystems health. In this study, the colloidal stability and aggregation kinetics of nanocrystal quantum dots (QDs) —CdSe/ZnS QDs—were thoroughly explored under a wide range of aqueous environmental conditions. The z-average hydrodynamic diameters (z-avg. HDs) and zeta potential (ξ potential) of CdSe/ZnS QDs were measured in monovalent electrolyte (NaCl) and divalent electrolyte (CaCl2) solutions in both the absence and presence of natural organic matter (NOM)—Suwannee River natural organic matter, SRNOM to assess the dynamic growth of these nanoaggregate-QD-complexes, and the evaluation of their colloidal stability. Results show that CaCl2 was more effective to destabilize the QDs compared to NaCl at similar concentrations. An increase in NaCl concentration from 0.01 to 3.5 M increased the z-avg. HD of QD aggregates from 61.4 nm to 107.2 nm. The aggregation rates of QDs increased from 0.007 to 0.042 nm·s−1 with an increase in ionic strength from 0.5 to 3.5 M NaCl solutions, respectively. In the presence of Na+ cations, the aggregation of QDs was limited as steric forces generated by the original surface coating of QDs prevailed. In the presence of CaCl2, the aggregation of QDs was observed at a low concentration of CaCl2 (0.0001 M) with a z-avg. HD of 74.2 nm that significantly increased when the CaCl2 was higher than 0.002 M. Larger sizes of QD aggregates were observed at each level of CaCl2 concentration in suspensions of 0.002–0.1 M, as the z-avg. HDs of QDs increased from 125.1 to 560.4 nm, respectively. In the case of CaCl2, an increase in aggregation rates occurred from 0.035 to 0.865 nm·s−1 with an increase in ionic strength from 0.0001 M to 0.004 M, respectively. With Ca2+ cations, the aggregation of QDs was enhanced due to the bridging effects from the formation of complexes between Ca2+ cations in solution and the carboxyl group located on the surface coating of QDs. In the presence of SRNOM, the aggregation of QDs was enhanced in both monovalent and divalent electrolyte solutions. The degree of aggregation formation between QDs through cation-NOM bridges was superior for Ca2+ cations compared to Na+ cations. The presence of SRNOM resulted in a small increase in the size of the QD aggregates for each of NaCl concentrations tested (i.e., 0.01 to 3.5 M, except 0.1 M), and induced a monodispersed and narrower size distribution of QDs suspended in the monovalent electrolyte NaCl concentrations. In the presence of SRNOM, the aggregation rates of QDs increased from 0.01 to 0.024 nm 1 with the increase of NaCl concentrations from 0.01 to 2 M, respectively. The presence of SRNOM in QDs suspended in divalent electrolyte CaCl2 solutions enhanced the aggregation of QDs, resulting in the increase of z-avg. HDs of QDs by approximately 19.3%, 42.1%, 13.8%, 1.5%, and 24.8%, at CaCl2 concentrations of 0.002, 0.003, 0.005, 0.01, and 0.1 M, respectively. In the case of CaCl2, an increase in aggregation rates occurred from 0.035 to 0.865 nm·s−1 with an increase in ionic strength from 0.0001 to 0.004 M, respectively. Our findings demonstrated the colloidal stability of QDs and cations-NOM-QD nanoparticle complexes under a broad spectrum of conditions encountered in the natural and engineered environment, indicating and the potential risks from these nanoparticles in terms of human and ecosystem health.

Building the Bridge From Aquatic Nanotoxicology to Safety by Design Silver Nanoparticles

Nanotechnologies have rapidly grown, and they are considered the new industrial revolution. However, the augmented production and wide applications of engineered nanomaterials (ENMs) and nanoparticles (NPs) inevitably lead to environmental exposure with consequences on human and environmental health. Engineered nanomaterial and nanoparticle (ENM/P) effects on humans and the environment are complex and largely depend on the interplay between their peculiar properties such as size, shape, coating, surface charge, and degree of agglomeration or aggregation and those of the receiving media/body. These rebounds on ENM/P safety and newly developed concepts such as the safety by design are gaining importance in the field of sustainable nanotechnologies. This article aims to review the critical characteristics of the ENM/Ps that need to be addressed in the safe by design process to develop ENM/Ps with the ablility to reduce/minimize any potential toxicological risks for living beings associated with their exposure. Specifically, we focused on silver nanoparticles (AgNPs) due to an increasing number of nanoproducts containing AgNPs, as well as an increasing knowledge about these nanomaterials (NMs) and their effects. We review the ecotoxicological effects documented on freshwater and marine species that demonstrate the importance of the relationship between the ENM/P design and their biological outcomes in terms of environmental safety.

Toxic Effects and Mechanisms of Silver and Zinc Oxide Nanoparticles on Zebrafish Embryos in Aquatic Ecosystems

The global application of engineered nanomaterials and nanoparticles (ENPs) in commercial products, industry, and medical fields has raised some concerns about their safety. These nanoparticles may gain access into rivers and marine environments through industrial or household wastewater discharge and thereby affect the ecosystem. In this study, we investigated the effects of silver nanoparticles (AgNPs) and zinc oxide nanoparticles (ZnONPs) on zebrafish embryos in aquatic environments. We aimed to characterize the AgNP and ZnONP aggregates in natural waters, such as lakes, reservoirs, and rivers, and to determine whether they are toxic to developing zebrafish embryos. Different toxic effects and mechanisms were investigated by measuring the survival rate, hatching rate, body length, reactive oxidative stress (ROS) level, apoptosis, and autophagy. Spiking AgNPs or ZnONPs into natural water samples led to significant acute toxicity to zebrafish embryos, whereas the level of acute toxicity was relatively low when compared to Milli-Q (MQ) water, indicating the interaction and transformation of AgNPs or ZnONPs with complex components in a water environment that led to reduced toxicity. ZnONPs, but not AgNPs, triggered a significant delay of embryo hatching. Zebrafish embryos exposed to filtered natural water spiked with AgNPs or ZnONPs exhibited increased ROS levels, apoptosis, and lysosomal activity, an indicator of autophagy. Since autophagy is considered as an early indicator of ENP interactions with cells and has been recognized as an important mechanism of ENP-induced toxicity, developing a transgenic zebrafish system to detect ENP-induced autophagy may be an ideal strategy for predicting possible ecotoxicity that can be applied in the future for the risk assessment of ENPs.

Dissolution of Silver Nanoparticles in Stratified Estuarine Mesocosms and Silver Accumulation in a Simple Planktonic Freshwater Trophic Chain

The increasing presence of nanomaterials in consumer products has led the scientific community to study the environmental fate of these contaminants of emerging concern. Silver nanoparticles, used mainly for their antibacterial properties, are among the most common nanomaterials. Understanding their transformations and interactions with living organisms, especially under environmentally relevant conditions that can modify metal bioavailability, is a crucial step in the study of their impacts on aquatic ecosystems. In the present study, citrate-coated silver nanoparticles (20 nm; 10 µg/L) were added to the surface freshwater layer of mesocosms simulating a stratified estuary. The investigation by dialysis of the nanoparticle dissolution showed that a large amount of total silver was found in the freshwater layer (and a very low amount in the seawater layer) and that 5–15% was in the form of dissolved silver. These results indicate that the halocline, separating fresh water from seawater, acted as a strong density barrier limiting the sedimentation of the nanoparticles. A simple trophic chain, composed of the freshwater alga Chlamydomonas reinhardtii and the invertebrate Daphnia magna, was used to determine silver bioavailability. This study suggests that citrate-coated silver nanoparticles do not significantly contribute to Ag accumulation by algae but may do so for invertebrates.

Abdalla M, Bechelany M. Review on Natural, Incidental, Bioinspired, and Engineered Nanomaterials: History, Definitions, Classifications, Synthesis, Properties, Market, Toxicities, Risks, and Regulations

Nanomaterials are becoming important materials in several fields and industries thanks to their very reduced size and shape-related features. Scientists think that nanoparticles and nanostructured materials originated during the Big Bang process from meteorites leading to the formation of the universe and Earth. Since 1990, the term nanotechnology became very popular due to advances in imaging technologies that paved the way to specific industrial applications. Currently, nanoparticles and nanostructured materials are synthesized on a large scale and are indispensable for many industries. This fact fosters and supports research in biochemistry, biophysics, and biochemical engineering applications. Recently, nanotechnology has been combined with other sciences to fabricate new forms of nanomaterials that could be used, for instance, for diagnostic tools, drug delivery systems, energy generation/storage, environmental remediation as well as agriculture and food processing. In contrast with traditional materials, specific features can be integrated into nanoparticles, nanostructures, and nanosystems by simply modifying their scale, shape, and composition. This article first summarizes the history of nanomaterials and nanotechnology. Followed by the progress that led to improved synthesis processes to produce different nanoparticles and nanostructures characterized by specific features. The content finally presents various origins and sources of nanomaterials, synthesis strategies, their toxicity, risks, regulations, and self-aggregation.

Aquatic Environment Exposure and Toxicity of Engineered Nanomaterials Released from Nano-Enabled Products: Current Status and Data Needs

Rapid commercialisation of nano-enabled products (NEPs) elevates the potential environmental release of engineered nanomaterials (ENMs) along the product life cycle. The current review examined the state of the art literature on aquatic environment exposure and ecotoxicity of product released (PR) engineered nanomaterials (PR-ENMs). Additionally, the data obtained were applied to estimate the risk posed by PR-ENMs to various trophic levels of aquatic biota as a means of identifying priority NEPs cases that may require attention with regards to examining environmental implications. Overall, the PR-ENMs are predominantly associated with the matrix of the respective NEPs, a factor that often hinders proper isolation of nano-driven toxicity effects. Nevertheless, some studies have attributed the toxicity basis of observed adverse effects to a combination of the released ions, ENMs and other components of NEPs. Notwithstanding the limitation of current ecotoxicology data limitations, the risk estimated herein points to an elevated risk towards fish arising from fabrics' PR-nAg, and the considerable potential effects from sunscreens' PR-nZnO and PR-nTiO2 to algae, echinoderms, and crustaceans (PR-nZnO), whereas PR-nTiO2 poses no significant risk to echinoderms. Considering that the current data limitations will not be overcome immediately, we recommend the careful application of similar risk estimation to isolate/prioritise cases of NEPs for detailed characterisation of ENMs' release and effects in aquatic environments.

Nanotechnological approaches as a promising way for heavy metal mitigation in an aqueous system

The ever-rising environmental problems because of heavy metals emerging from anthropogenic activities pose an impending threat to all biota globally. Considering their persistence and possibility in biomagnification, they are prominent among pollutants. There has been an apparent shift of research interest in advancing cost-effective and competent technologies to mitigate environmental contaminants, specifically heavy metals. In the recent two decades, tailored nanomaterials (NMs), nanoparticles, and NM-based adsorbents have been emerging for removing heavy metal pollution on a sustainable scale, especially the green synthesis of these nanoproducts effective and nonhazardous means. Hence, this review explores the various avenues in nanotechnology, an attempt to gauge nanotechnological approaches to mitigate heavy metals in the aqueous system, especially emphasizing the recent trends and advancements. Inputs on remediating heavy metal in sustainable and environmentally benign aspects recommended future directions to compensate for the voids in this domain have been addressed.