Mechanochemical synthesis of catalysts and reagents for water decontamination: Recent advances and perspective

Mechanochemical remediation of contaminated soil: A review

Mechanochemical techniques have been garnering growing attention in remediation of contaminated soil. This paper summarizes the performance, mechanism, influential factors, and environmental impacts of mechanochemical remediation (MCR) for persistent organic pollutants (POPs) contaminated soil and heavy metal(loid) s (HMs) contaminated soil. Firstly, in contrast to other technologies, MCR can achieve desirable treatment of POPs, HMs, and co-contaminated soil, especially with high-concentration pollutants. Secondly, POPs undergo mineralization via interaction with mechanically activated substances, where aromatic and aliphatic pollutants in soil may go through varied degradation routes; inorganic pollutants can be firmly combined with soil particles by fragmentation and agglomeration induced by mechanical power, during which additives may enhance the combination but their contact with anionic metal(loid)s may be partially suppressed. Thirdly, the effect of MCR primarily hinges on types of milling systems, the accumulation of mechanical energy, and the use of reagents, which is basically regulated through operating parameters: rotation speed, ball-to-powder ratio, reagent-to-soil ratio, milling time, and soil treatment capacity; minerals like clay, metal oxides, and sand in soil itself are feasible reagents for remediation, and alien additives play a crucial role in synergist and detoxification; additionally, various physicochemical properties of soil might influence the mechanochemical effect to varying degrees, yet the key influential performance and mechanism remain unclear and require further investigation. Concerning the assessment of soil after treatment, attention needs to be paid to soil properties, toxicity of POPs' intermediates and leaching HMs, and long-term appraisement, particularly with the introduction of aggressive additives into the system. Finally, proposals for current issues and forthcoming advancements in this domain are enumerated in items. This review provides valuable insight into mechanochemical approaches for performing more effective and eco-friendly remediation on contaminated soil.

Meeting the UN Sustainable Development Goals with Mechanochemistry

Chemistry traditionally relies on reactions in solution, but this method is increasingly problematic due to the scale of chemical processes and their economic and environmental impact. Handling residual chemical waste, including solvents, incurs significant costs and environmental pressure. Conversely, novel chemical approaches are needed to address pressing societal issues such as climate change, energy scarcity, food insecurity, and waste pollution. Mechanochemistry, a sustainable chemistry discipline that uses mechanical action to induce chemical reactivity without bulk solvents, is a hot topic in academic research on sustainable and green chemistry. Given its fundamentally different working principles from solution chemistry, mechanochemistry offers more efficient chemical processes and the opportunity to design new chemical reactions. Mechanochemistry has a profound impact on many urgent issues facing our society and it is now necessary to use mechanochemistry to address them. This Minireview aims to provide a guide for using mechanochemistry to meet the United Nations (UN) Sustainable Development Goals (SDGs), thereby contributing to a prosperous society. Detailed analysis shows that mechanochemistry connects with most UN SDGs and offers more cost-efficiency than other approaches together with a superior environmental performance.

Responses of nitrobenzene removal performance and microbial community by modified biochar supported zerovalent iron in anaerobic soil

Biochar-supported ZVI have received increasing attention for their potential to remove nitrobenzene in groundwater and soil. However, the capacity of this material to enhance the biological reduction of nitrobenzene and alter microbial communities in anaerobic groundwater have not been explored. In this study, the nitrobenzene removal performance and mechanism of modified biochar-supported zerovalent iron (ZVI) composites were explored in anaerobic soil. The results showed that the 700 °C biochar composite enhanced the removal of nitrobenzene and inhibited its release from soil to the aqueous phase. NaOH-700-Fe50 had the highest removal rate of nitrobenzene, reaching 64.4%. However, the 300 °C biochar composite inhibited the removal of nitrobenzene. Microbial degradation rather than ZVI-mediated reduction was the main nitrobenzene removal pathway. The biochar composites changed the richness and diversity of microbial communities. ZVI enhanced the symbiotic relationship between microbial genera and weakened competition between soil microbial genera. In summary, the 700 °C modified biochar composite enhanced the removal of nitrobenzene by increasing microbial community richness and diversity, by upregulating functional genes, and by promoting electron transfer. Overall, the modified biochar-supported ZVI composites could be used for soil remediation, and NaOH-700-Fe50 is a promising composite material for the on-site remediation of nitrobenzene-contaminated groundwater.

Mechanochemical Synthesis of Cross-Linked Chitosan and Its Application as Adsorbent for Removal of Per- and Polyfluoroalkyl Substances from Simulated Electroplating Wastewater

Chitosan is a promising adsorbent for removing a wide range of pollutants from wastewater. However, its practical application is hindered by instability in acidic environments, which significantly impairs its adsorption capacity and limits its utilization in water purification. While cross-linking can enhance the acid stability of chitosan, current solvent-based methods are often costly and environmentally unfriendly. In this study, a solvent-free mechanochemical process was developed using high-energy ball milling to cross-link chitosan with various polyanionic linkers, including dextran sulfate (DS), poly[4-styrenesulfonic acid-co-maleic acid] (PSSM), and tripolyphosphate (TPP). The mechanochemically cross-linked (MCCL) chitosan products exhibited superior adsorption capacity and stability in acidic solutions compared to pristine chitosan. Chitosan cross-linked with DS (Cht-DS) showed the highest Reactive Red 2 (RR2) adsorption capacity, reaching 1559 mg·g-1 at pH 3, followed by Cht-PSSM (1352 mg·g-1) and Cht-TPP (1074 mg·g-1). The stability of MCCL chitosan was visually confirmed by the negligible mass loss of Cht-DS and Cht-PSSM tablets in pH 3 solution, unlike the complete dissolution of the pristine chitosan tablet. The MCCL significantly increased the microhardness of chitosan, with the order Cht-DS > Cht-PSSM > Cht-TPP, consistent with the RR2 adsorption capacity. When tested on simulated rinsing wastewater from chromium electroplating, Cht-DS effectively removed Cr(VI) (98.75% removal) and three per- and polyfluoroalkyl substances (87.40-95.87% removal), following pseudo-second-order adsorption kinetics. This study demonstrates the potential of the cost-effective and scalable MCCL approach to produce chitosan-based adsorbents with enhanced stability, mechanical strength, and adsorption performance for treating highly acidic industrial wastewater containing a mixture of toxic pollutants.

Solar photo-Fenton and persulphate-based processes for landfill leachate treatment: A critical review

Landfilling is the most usual solid waste management strategy for solid residues disposal. However, it entails several drawbacks such as the generation of landfill leachate that seriously threaten human life and the environment due to their toxicity and carcinogenic character. Among various technologies, solar photo-Fenton and sulphate-based processes have proven to be suitable for the treatment of these polluted streams. This review critically summarises the last three decades of studies in this field. It is found that the solar homogeneous photo-Fenton process should be preferably used as a pre- and post-treatment of biological technologies and as a standalone treatment for young, medium, and mature leachates, respectively. Studies on heterogeneous solar photo-Fenton process are lacking so that this technology may be scaled-up for industrial applications. Sulphate radicals are attractive for removing both COD and ammonia. However, no study has been reported on solar sulphate activation for landfill leachate treatment. This review discusses the main advances and challenges on treating landfill leachate through solar AOPs, it compares solar photo-Fenton and solar persulphate-based treatments, indicates the future research directions and contributes for a better understanding of these technologies towards sustainable treatment of landfill leachate in sunny and not-so-sunny regions.

Zero-valent iron-peroxydisulfate as synergistic co-milling agents for enhanced mechanochemical destruction of 2,4-dichlorophenol: Coupling reduction with oxidation

Mechanochemical (MC) remediation with zero-valent iron (ZVI) as co-milling agent enables the non-combustion and solvent-free disposal of solid halogenated organic pollutants (HOPs) via solid-phase reaction, but suffers from incomplete dechlorination (especially for less chlorinated chemicals). Herein, a reduction-oxidation coupling strategy using ZVI and peroxydisulfate as synergistic (ZVI-PDS) co-milling agents was investigated, with 2,4-dichlorophenol (2,4-DCP) as probe contaminant. By revisiting the MC destruction process of 2,4-DCP by ZVI, the contribution of both reductive and oxidative routes is confirmed, and the inefficient •OH generation is addressed. With ball-to-material and reagent-to-pollutant mass ratios of 30:1 and 13:1, respectively, ZVI-PDS achieves higher dechlorination ratio (86.8%) for 2,4-DCP within 5 h, outcompeting sole ZVI (40.3%) or PDS (33.9%), due to the accumulation of numerous SO4•-. As suggested by a two-compartment kinetic model, the optimal ZVI/PDS molar ratio of 4:1 is determined, which balances the relative contribution of reductive/oxidative routes and leads to a maximum mineralization efficiency of 77.4%. The analysis on product distribution verifies the generation of dechlorinated, ring-opening and minor coupling products (with low acute toxicity). This work validates the necessity to couple reduction with oxidation in MC destruction for solid HOPs, and may provide information on reagent formulation.

Mechanochemical remediation of lindane-contaminated soils assisted by CaO: Performance, mechanism and overall assessment

Soil contamination caused by persistent organic pollutants (POPs) has been a worldwide concern for decades. With lindane-contaminated soil as the target, a mechanochemical method assisted by CaO was comprehensively evaluated in terms of its remediation performance, degradation mechanism and overall assessment. The mechanochemical degradation performance of lindane in cinnamon soil or kaolin was determined under different additives, lindane concentrations and milling conditions. 2,2-Diphenyl-1-(2,4,6-trinitrophenyl) hydrazinyl free radical (DPPH^•) and electron spin resonance (ESR) tests evidenced that the degradation of lindane in soil was caused mainly by the mechanical activation of CaO to produce free electrons (e^-) and the alkalinity of the generated Ca(OH)₂. Dehydrochlorination or dechlorination by elimination, alkaline hydrolysis, hydrogenolysis and the subsequent carbonization were the main degradation pathways of lindane in soil. The main final products included monochlorobenzene, carbon substances and methane. The mechanochemical method with CaO was proved to also efficiently degrade lindane in three other soils and other hexachlorocyclohexane isomers and POPs in soil. The soil properties and soil toxicity after remediation were assessed. This work presents a relatively clear discussion of various aspects of the mechanochemical remediation of lindane-contaminated soil assisted by CaO.

Ball milling enhanced Cr(VI) removal of zero-valent iron biochar composites: Functional groups response and dominant reduction species

Zero-valent iron biochar composites (ZVI/BC) have been widely used to remove Cr(VI) from water. However, the application of ZVI/BC prepared by the carbothermal reduction was limited by the non-uniform dispersion of ZVI on the biochar surface. In this work, ball milling technique was introduced to modify ZVI/BC. Results showed that after ball milling, the maximum Langmuir adsorption capacity for Cr(VI) was 117.7 mg g-1 (298 K) which was 2.08 times higher than ZVI/BC. The initial adsorption rate of the Elovich model increased from 4.57 × 102 mg g-1 min-1 to 3.74 × 109 mg g-1 min-1 after ball milling. Dispersibility of ZVI on biochar surface and contact between ZVI and biochar were improved by the ball milling, thus accelerating the electron transfer. Besides, ball milling increased the content of oxygen-containing functional groups in biochar, contributing to the chemisorption of Cr(VI). The response sequence of oxygen-containing functional groups was analyzed by two-dimensional correlation spectroscopy, indicating that Cr(VI) preferentially complexed with phenolic -OH. Shielding experiments showed that Fe (0) was the dominant reducing species with a contribution of 73.4%, followed by surface-bound Fe(II) (21.3%) and dissolved Fe2+ (5.24%). Density functional theory calculations demonstrated that ball milled ZVI/BC improved the adsorption affinity and electron transfer flux towards Cr(VI) by introducing phenolic -OH and Fe (0). Combining all the textural characterization, the Cr(VI) removal mechanism of the ball milled ZVI/BC could be proposed as adsorption, reduction, and precipitation. Eventually, stable Cr-Fe oxides (FeOCr2O3 and Cr1·3Fe0·7O3) were formed. This work not only provides a simple method to modify ZVI/BC to remove Cr(VI) in water efficiently and rapidly, but also improves the mechanistic insight into the Cr(VI) removal by iron-carbon composites via the response sequence of functional group analysis and the quantitative analysis of reducing species.

Applications of crushing and grinding-based treatments for typical metal-containing solid wastes: Detoxification and resource recovery potentials

Metal-containing solid wastes can induce serious environmental pollution if managed improperly, but contain considerable resources. The detoxification and resource recoveries of these wastes are of both environmental and economic significances, being indispensable for circular economy. In the past decades, attempts have been made worldwide to treat these wastes. Crushing and grinding-based treatments have been increasingly applied, the operating apparatus and parameters of which depend on the waste type and treatment purpose. Based on the relevant studies, the applications of crushing and grinding on four major types of solid wastes, namely spent lithium-ion batteries (LIBs) cathode, waste printed circuit boards (WPCBs), incineration bottom ash (IBA), and incineration fly ash (IFA) are here systematically reviewed. These types of solid wastes are generated in increasing amounts, and have the potentials to release various organic and inorganic pollutants. Despite of the widely different texture, composition, and other physicochemical properties of the solid wastes, crushing and grinding have been demonstrated to be universally applicable. For each of the four wastes, the technical route that involving crushing and grinding is described with the advantages highlighted. The crushing and grinding serve either mainstream or auxiliary role in the processing of the solid wastes. This review summarizes and highlights the developments and future directions of crushing and grinding-based treatments.

Nanoarchitectonics of g-C3N4 Nanosheets with a AuCu Enhancement Effect for Superior Photo- and Electrochemical Activity

AuCu alloy nanoparticles (NPs) were embedded in superior thin g-C₃N₄ nanosheets by a mechanochemical pre-reaction and subsequent thermal polymerization at high temperature. The introduction of AuCu NPs increased conductivity, decreased the band gap, expended light absorption, and improved the separation and transfer efficiencies of photogenerated electrons and holes. Moreover, the uniform distribution of AuCu NPs in g-C₃N₄ nanosheets is ascribed to the pre-reaction of bulk g-C₃N₄ and metal salts to create activity cites. The adsorption ability in the visible light region was improved due to the plasma effect of Au. AuCu/g-C₃N₄ composites (AuCu/CN-1%) with optimized component ratios revealed the highest transient photocurrent responses, the lowest electrochemical impedance arc radius, and the best photocatalytic H₂ evolution rate of 930.2 μmol g^-1 h^-1. These findings exhibited that loading AuCu bimetallic NPs could efficiently offset some disadvantages of g-C₃N₄ and improve its photocatalytic performances.