Abundance and characteristics of microplastics in drinking water treatment plants, distribution systems, water from refill kiosks, tap waters and bottled waters

Microplastic transport dynamics and the path forward with magnetic nanoparticle based solutions

Microplastics (MPs) have been found widely in aquatic systems and recognized as harmful pollutants for both human health and the environment. As a consequence, it has become essential to find solutions to resolve this issue. This study summarizes the extensive distribution of MPs across various aquatic environments. This paper highlights different types of magnetic nanoparticle and their efficiencies, retention time, kinetics or isotherms models and mechanisms of removal for different types of pollutants as well as MPs. Moreover, this study offers an extensive exploration of the interactions between magnetic nanoparticles (MNPs) and MPs, exploring the inherent mechanism of aggregation in detail. Furthermore, it highlights the recent developments in understanding the effectiveness of MNPs in removing MPs, demonstrating recent advancements in this area of research. It assesses the working principles, benefits, and drawbacks of various synthesis methods for nanoparticle formation, which have high potential for the remediation of MPs. Additionally, this work provides the potential future directions for further research. This comprehensive study uncovers key factors that could be significantly helpful in the development of remediation techniques that are more sustainable and effective.

From source to distribution channel: A baseline study of microplastic occurrence in drinking water in Ogun State, Nigeria

Microplastics (MPs) are emerging contaminants known to have contaminated not only surface and groundwater but also drinking water treatment plants (DWTPs) and tap water. Little is known about the occurrence of MPs in DWTPs in Africa, particularly in developing countries like Nigeria. To address this knowledge gap, this study investigated the prevalence and estimated daily intake of MPs in raw water, DWTPs, and tap water in a semi-urban area in Ogun State, Nigeria. Using Rose Bengal staining and optical microscopy, MPs in water samples were identified and characterised using standard methods. The abundances of MPs were 16.13 ± 3.83 particles/L in raw water, 10.74 ± 3.76 particles/L in treated water, and 12.43 ± 3.92 particles/L in tap water. Most of the MPs found in the water samples were classified as fibres, followed by fragments, with a size of < 1 mm. This study showed that the drinking water treatment plant reduced microplastics from raw water by 40%, however, there was an increase in the abundance of MPs in tap water. Residents estimated daily consumption of MPs from tap water varied between 0.31 and 0.44 particles for adults and between 1.2 and 1.69 particles for children. This study addresses a critical gap in understanding microplastic pollution in the water distribution systems and DWTPs. The results also indicated that MPs were not effectively removed, requiring a more sophisticated treatment method to lower human exposure to MPs through drinking water from DWTPs.

Microplastics induce human kidney development retardation through ATP-mediated glucose metabolism rewiring

Recent research has revealed an accumulation of microplastics (MPs) in the environment and human tissues, giving rise to concerns about their potential toxicity. The kidney is a vital organ responsible for various physiological functions. Early kidney development is crucial for ensuring proper structure and function. Nevertheless, the impact of MPs on renal development is unclear. In the current study, we examined the effect of MPs on nephrogenesis using human kidney organoids. The environmentally relevant concentrations of MPs were applied. Following MP exposure, the kidney organoids exhibited reduced size and abnormal tubular structures. MPs caused an increased level of mitochondrial reactive oxygen species and DNA damage. Transcriptomic and central carbon metabolism analysis data revealed significant alterations in metabolic pathways after MP exposure, with a decrease in glycolysis and an increase in tricarboxylic acid cycle activity. Moreover, glycolysis inhibition was identified as a contributing factor to the reduced size and abnormal tubular structure of the kidney organoids. These results emphasize the negative effects of MPs on renal development through metabolic reprogramming. Our study provides a novel perspective of MP-induced nephron toxicity mechanisms. The affected pathways and metabolites identified here may act as early biomarkers and therapeutic targets for PS-MP-induced renal toxicity.

Pressure-Driven Membrane Processes for Removing Microplastics

The intense consumption of polymeric materials combined with poor waste management results in the dissemination of their fragments in the environment as micro- and nanoplastics. They are easily dispersed in stormwater, wastewater, and landfill leachate and carried towards rivers, lakes, and oceans, causing their contamination. In aqueous matrices, the use of membrane separation processes has stood out for the efficiency of removing these particulate contaminants, achieving removals of up to 100%. For this review article, we researched the removal of microplastics and nanoplastics by membrane processes whose driving force is the pressure gradient. The analysis focuses on the challenges found in the operation of microfiltration, ultrafiltration, nanofiltration, and reverse-osmosis systems, as well as on the innovations applied to the membranes, with comparisons of treatment systems and the peculiarities of each system and each aqueous matrix. We also point out weaknesses and opportunities for future studies so that these techniques, known to be capable of removing many other contaminants of emerging concern, can subsequently be widely applied in the removal of micro- and nanoplastics.

Assessment and treatment of microplastics in different environmental compartments of Kallar Kahar Lake-a case study

Microplastic pollution has garnered global attention in recent decades due to its recognized ecological concerns through previous studies. However, in Pakistan, scarce information has been reported on MP pollution concerning the freshwater ecosystem. The current study was conducted on Kallar Kahar Lake, Punjab, Pakistan for (1) quantification, characterization, and distribution of MPs in surface water, sediments, and fish samples and (2) two treatment processes (magnetization and coagulation + flocculation) for the removal of MPs from the water. Samples were collected from each point by grab sampling method to investigate the MPs according to their type, shape, and color. The MP quantification and analysis were accomplished via the counting method by a stereomicroscope and Fourier transform infrared spectroscopy for their polymer type and composition. Results indicated the average MP abundance as 49.6 ± 11.14 MP/500 mL, 143 ± 48.18 MP/100 g, and 79 ± 12.2 items for water, sediments, and fish correspondingly. The dominant MP colors were blue, transparent, and green in all three environmental compartments. The ATR-FTIR identified the polymer types in lake water, sediment, and fish were PPS, PIB, and PLF; PET, PE, PP, and Natural Latex Rubber; and PET, respectively. The MP removal rate was observed high in both treatments. The average % removal rate of iron ore magnetization treatment was observed to be 80% at 1300 mg/L dosage of Fe2O3. Similarly in chemical coagulation processes, the highest MP removal efficiency was 85% (PET), 83% (PPS) and 80% (PIB) at the different concentration dosages of 150 + 15 mg/L, 111 + 15 mg/L, and 150 + 111 + 15 mg/L for Combination 1, Combination 2, and Combination 3, respectively. Overall, this study provided an integrative and novel approach for the removal of MP from surface water, which also holds an explicit commercial utilization prospect to overpower the MP pollution in water bodies. Also, the current findings serve as baseline data for the study of local freshwater systems.

Identification and occurrence of microplastics in drinking water bottles and milk packaging consumed by humans daily

Microplastic (MP) pollution has become a growing concern due to its potential environmental and health impacts. The present study aimed to investigate the presence of MPs in specific brands of drinking water bottle and milk packets. To identify the MPs, researchers employed microscopic techniques, FTIR spectroscopy, and FESEM with EDS. The types of polymers were determined by comparing the obtained values with reference standards. The study also assessed the potential daily microplastic exposure from drinking water and milk consumption. MPs were detected in the samples in three different shapes: filaments, fibers, and fragments. Four types of polymers were identified: polypropylene (PP), polyamide (PA), polysulfone (PSU), and polyethersulfone (PES). The colors observed included violet, blue, green, red, and black. In the analyzed drinking water samples, a total of 13 MPs sized 1-3 mm and 7 MPs sized 3-6 mm were found. In the milk samples, there were 2 MPs sized 4-5 mm and 4 MPs sized 2-3 mm. The results of the study indicate that MPs are present in the examined drinking water and milk, which are directly consumed by humans. This suggests that microplastic pollution may occur during the manufacturing or packaging processes of these products. The study recommends implementing measures to reduce microplastic contamination at the beginning of the production process for drinking water and milk.

Analysis of Brazilian plastic waste management in the global context and case study of the City of Vitória, Espírito Santo

This review analyses Brazil's current stage of plastic waste management, comparing it to what is being carried out worldwide. The Brazilian National Solid Waste Policy established principles and guidelines for solid waste management. However, a decade after its implementation, the results demonstrate timid results about those expected. Brazil's official solid waste and plastics recycling rates are around 4% and 1%, respectively, considerably behind countries with comparable economic growth levels. This work dedicates considerable attention to microplastic pollution, a worldwide concern with potential effects on water bodies, the atmosphere, soils, human health, and vegetal and animal lives. A case study on the solid waste management system in Vitória City, the capital of Espírito Santo, was developed. Besides, a portrait of the pollution in Vitória and Espírito Santo Bays in the atmosphere and mangrove areas is presented. The more critical issues found were the low adherence of the population's city in the selective waste collection (what is reflected in the low solid waste recycling rates), plastic debris, and tiny plastic in the waters, coexisting with heavy metals and hydrocarbons-originated from industrial and anthropogenic activities; microplastics are present in the atmosphere, adding their adverse effects to those of the pollutants already existing in the air and the illegal disposal of waste and the anthropogenic activities which degrade the mangrove ecosystems. A global treaty is being discussed at the United Nations. It's expected that their definitions, initially promised by the end of 2024, will be able to eradicate plastic pollution effectivelly.

Occurrence and characteristics of microplastics in South African beverages

This study presents the first comprehensive assessment of microplastics (MPs) in alcoholic (AB) and non-alcohol (NAB) beverages in South Africa. Beverages in various packaging materials, specifically glass, aluminium, and polyethylene terephthalate (PET) were tested for MP content. The samples were filtered and digested, then stained with Rose Bengal dye to facilitate particle identification, followed by physical and chemical characterisation using stereomicroscopy and micro-Raman spectroscopy, respectively. Fibers were the prevalent shape observed in AB packaged in glass, as well as in NAB (PET), and NAB (Aluminium). The Aluminium samples also exhibited a high abundance of fragments. Multivariate principal component analysis and Pearson correlation coefficient matrix revealed positive correlations between fibers of size ranges 0.02-0.1 mm and 0.1-0.5 mm in NAB samples. While in AB samples, the ranges were observed to be 1-2 mm and 2-3 mm. Six polymers were identified, namely: polypropylene (PP), polyethylene (PE), polyurethane (PU), polyamide (PA), PET, and polybutylene terephthalate (PBT). This study offers a holistic appraisal of MPs in commercially sold beverages in South Africa. It establishes a framework for assessing the socioeconomic impacts of MPs, including their commercial, environmental, social, and sustainability implications.

First report of a major management target species, chironomid Paratanytarsus grimmii (Diptera: Chironomidae) larvae, in drinking water treatment plants (DWTPs) in South Korea

Ensuring the supply of safe and high-quality drinking water can be compromised by the presence of chironomid larvae in drinking water treatment plants (DWTPs), which may contaminate municipal water systems through freshwater resources. Chironomids are dominant species known for their resilience to a broad range of extreme aquatic environments. This study aimed to identify the morphological characteristics and obtain genetic information of the chironomid Paratanytarsus grimmii found in the water intake source and freshwater resource of DWTPs in Korea, highlighting the potential possibility of a parthenogenetic chironomid outbreak within DWTP networks. The distribution of chironomid larvae at the water intake source site (DY) of the Danyang DWTP and the freshwater resource (ND) of the Nakdong River was investigated. A total of 180 chironomid individuals, encompassing three subfamilies and six species from six 6 genera were identified at the DY site, with Procladius nigriventris being the dominant species. At the ND site, fifty chironomid individuals, encompassing two subfamilies and six species from six genera, were identified, with Cricotopus sylvestris being the dominant species. The morphological characteristics of the head capsule, mentum, mandible, and antennae of six P. grimmii larvae collected from the DY and ND sites were characterized. DNA barcoding and phylogenetic analysis revealed distinct mitochondrial diversities between the P. grimmii larvae from DY and those from ND. These results provide crucial information for the morphological identification and DNA barcoding of the key management target chironomid P. grimmii larvae, which can be used to detect the occurrence of this chironomid species in DWTPs.

Occurrence and risk of microplastics and hexabromocyclododecane in urban drinking water systems: From source water to tap water

The widespread presence of microplastics (MPs) in drinking water systems and their risk of releasing additives have caused widespread concern. However, current research on the migration and risks of MPs and additives in the complete drinking water supply chain remains inadequate. In this study, micro-Raman spectrometer was used to track the entire transport process of MPs from the water source to the tap water, with concentrations ranging from 805 to 4960 items/L, and polyethylene and Polyethylene terephthalate were dominant. The removal efficiency of MPs at the drinking water treatment plant was 85.0 ± 5.2 %. However, chlorination increased the proportion of polystyrene by 40.1 ± 5.3 %. Chlorination increases the surface roughness and carbonyl index of polystyrene standards, and promotes the release of hexabromocyclododecane (HBCD) (482.0 ng/g-2208.7 ng/g). The non-carcinogenic risk index of HBCD ingestion through drinking water remains well below 1 for residents. Complete water treatment processes significantly reduce the risks posed by MPs, achieving reductions of 54.3 % in the pollution load index and 82.1 % in the potential ecological risk index. The estimated daily intake of MPs ingested by residents through tap water ranges from 33.4 to 45.6 items/kg/d. This study investigated the occurrence of MPs in the complete drinking water supply chain and the risk of chlorine disinfection for HBCD release, which could help develop more effective MPs control measures and risk management strategies.

Quantifying the effects of chlorine disinfection on microplastics by time-resolved inductively coupled plasma-mass spectrometry

Using current water treatment systems, significant amounts of microplastics (MPs) are passing through and being released into the aquatic environment. However, we do not clearly know what effects disinfection processes have had on these particles. In this study, we applied inductively coupled plasma-mass spectrometry (ICP-MS) operating in time-resolved analysis (TRA) mode for quantifying changes in the chlorine (Cl) content of MPs under a variety of water treatment scenarios. Our results illustrated that time-resolved ICP-MS offers a potential method for sensitive and direct analysis of Cl content, including Cl mass and chlorine association (%Cl/C), of discrete particles in the MP suspension by the fast sequential measurements of signals from 35Cl1H2 and 12C1H. Our research, across various water treatment scenarios, also showed that polystyrene (PS) MPs exhibited greater reactivity to Cl disinfectant after being pre-disinfected with UV light and in mildly acidic to neutral pH environments. It is noteworthy that about half of the particles in MP suspension exposed to 10 mg Cl2/L, a typical Cl dose applied in water treatment, were chlorinated, and had a Cl content comparable to that of particles subjected to extreme conditions. Of even greater concern is the fact that our cell viability tests revealed that chlorinated MPs induced considerably higher rates of cell death in both human A549 and Caco-2 cells, and that the effects were Cl dose- and polymer type-dependent. Overall, this study demonstrates the potential of time-resolved ICP-MS as a valuable technique for quantifying the Cl content of MP particles, which is crucial to assessing the fate and transformation of MPs in our water supply and treatment systems.

Tracing microplastic pollution in Mahi River estuary, Gulf of Khambhat, Gujarat, and their influence on functional traits of macrobenthos

Most maritime habitats contain microplastic (MPs) contamination. The quality of the benthic ecosystem's habitat is declining as MPs accumulate in marine system. The contamination of MPs must therefore be investigated. We studied MPs pollution in the Mahi River, estuary, and macrobenthos. In the present study, the abundance of MPs fragments gradually decreased from the high tide zone to the low tide zone and muddy sediment has high MPs concentrations due to sediment characteristics and particle size. The majority of sediment and biota MPs were fibrous and black. MPs in both silt and biota have identical chemical compositions (modified cellulose), shapes, and colors. A significant source of pollutants and MPs fluxing into the ocean is well within the river system. Perinereis aibuhitensis ingested the most MPs out of 11 species, whereas Amphipods did not show any presence of MPs. Our findings showed that functional characteristics are essential for macrobenthos MPs intake. MPs in macrobenthos are high due to biological functions such as feeding, ecological groups, feeding mechanisms, body size, and bioturbation. MPs in marine sediment and organisms are tracked down to the Mahi River exceeding 50 km. The present work has investigated the idea that the macrobenthos that live in the sediment are ingesting the MPs that are building up there and this ingestion relies on the macrobenthos' functional characteristics.

A review on cigarette butts: Environmental abundance, characterization, and toxic pollutants released into water from cigarette butts

Every year, trillions of cigarette butts (CBs) are discarded into the environment. CBs are frequently found on beaches and in urban areas worldwide due to their high resistance to physical and biological degradation. Components of CBs, such as heavy metals, polycyclic aromatic hydrocarbons (PAHs), cellulose acetate fibers (microplastics), nicotine, aromatic amines, and BTEX (benzene, toluene, ethylbenzene, and xylene), are released into aquatic environments. Harmful components released into water from CBs cause both water pollution and toxic effects on different aquatic organisms. In the first part of this review, studies investigating the density of CBs in different environments were reviewed. In the second part, the results of studies investigating the characteristics of cigarette filters using characterization techniques were reviewed. Then, studies on heavy metals, PAHs, microplastics (microfibers), nicotine, aromatic amines and BTEX released into water from CBs were reviewed, and factors affecting the types, amounts and release conditions of compounds (pollutants) released into water from CBs were discussed. In the last section, taking into account the studies carried out to date, deficiencies in the research on pollutants released into water from CBs were identified and recommendations were made for future studies. This review highlights the environmental abundance of CBs, the characterization results of CB filters, and the release into water of some substances in CBs that are pollutants for the aquatic environment. This review may serve as a guide to elucidate the environmental abundance of CBs, the characteristics of CBs/filters, and the concentration in water of some pollutants released into water from CBs.

A systematic review of microplastics emissions in kitchens: Understanding the links with diseases in daily life

The intensification of microplastics (MPs) pollution has emerged as a formidable environmental challenge, with profound global implications. The pervasive presence of MPs across a multitude of environmental mediums, such as the atmosphere, soil, and oceans, extends to commonplace items, culminating in widespread human ingestion and accumulation via channels like food, water, and air. In the domestic realm, kitchens have become significant epicenters for MPs pollution. A plethora of kitchen utensils, encompassing coated non-stick pans, plastic cutting boards, and disposable utensils, are known to release substantial quantities of MPs particles in everyday use, which can then be ingested alongside food. This paper conducts a thorough examination of contemporary research addressing the release of MPs from kitchen utensils during usage and focuses on the health risks associated with MPs ingestion, as well as the myriad factors influencing the release of MPs in kitchen utensils. Leveraging the insights derived from this analysis, this paper proposes a series of strategic recommendations and measures targeted at mitigating the production of MPs in kitchen settings. These initiatives are designed not solely to diminish the release of MPs but also to enhance public awareness regarding this pressing environmental concern. By adopting more informed practices in kitchens, we can significantly contribute to the reduction of the environmental burden of MPs pollution, thus safeguarding both human health and the ecological system.

Assessing health risks in bottled water: chemical compounds and their impact on human health

Bottled mineral and spring water constitute one of the main sources of drinking water. Relevant legal acts in each country individually regulate the highest permitted concentrations of harmful substances in these waters. However, current regulations do not take into account newly emerging contaminants such as BPA. Analysis of the chemical composition of 72 bottled waters from the Polish market showed that undesirable elements occur in quantities that do not exceed the maximum permissible concentrations. Special attention should be paid to bottled therapeutic water, which may contain elevated concentrations of some micronutrients, such as Al, B, Ba, Fe, Mn, or Sr contributing to the pattern of health risk with excessive consumption of this type of water. The presence of BPA was confirmed in 25 tested waters. The calculated hazard index values showed that the most exposed group are children up to 12 years of age. The greatest attention should be paid to waters with high mineralisation, for which the calculated risk values are the highest.

Microplastic prevalence and human exposure in the bottled drinking water in the west Godavari region of Andhra Pradesh, India

Microplastics (MPs) are widespread, minute plastic particles present in various aquatic environments, raising concerns about their effect on human health and ecosystems. The detrimental effects of MPs on the environment, include the contamination of ecosystems, harm to aquatic life through ingestion, potential disruption of food chains, and long-term ecological consequences. Despite numerous studies confirming the MP's presence in aquatic environments, research specifically focused on MPs in bottled drinking water (BDW) is limited. Research on MPs in drinking water is vital to assess potential health risks and develop strategies for ensuring water safety and quality. This study fills a research gap by investigating microplastics (MPs) in nine brands of BDW in the West Godavari region of Andhra Pradesh, India. The average MP concentration in BDW was found to be 2.89 ± 0.48 items/L, with fibers being the predominant shape and sizes ranging from 500 to 1000 μm. Transparent and blue were the most common colors. From ATR-FTIR analysis, the dominant polymer found was polypropylene (PP) followed by polyethylene terephthalate (PET). The human risk assessment was also calculated using the formula of Estimated daily intake (EDI) and Lifetime intake (LTI). The calculation found that the EDI of MPs for children and adults ranged from 0.041 to 0.291 MPs per kilogram per day and 0.019 to 0.133 MPs per kilogram per day, respectively. The mean LTI of MP consumption of an individual, ranged from 17,958 to 2,54,861 MPs, considering an average age of 75 years. The current findings offer valuable information for ongoing evaluations of the potential human risks linked to MP exposure.

Microplastics in drinking water: A review on methods, occurrence, sources, and potential risks assessment

Microplastics in drinking water captured widespread attention following reports of widespread detection around the world. Concerns have been raised about the potential adverse effects of microplastics in drinking water on human health. Given the widespread interest in this research topic, there is an urgent need to compile existing data and assess current knowledge. This paper provides a systematic review of studies on microplastics in drinking water, their evidence, key findings, knowledge gaps, and research needs. The data collected show that microplastics are widespread in drinking water, with large variations in reported concentrations. Standardized methodologies of sampling and analysis are urgently needed. There were more fibrous and fragmented microplastics, with the majority being <10 μm in size and composed of polyester, polyethylene, polypropylene, and polystyrene. Little attention has been paid to the color of microplastics. More research is needed to understand the occurrence and transfer of microplastics throughout the water supply chain and the treatment efficiency of drinking water treatment plants (DWTPs). Methods capable of analyzing microplastics <10 μm and nanoplastics are urgently needed. Potential ecological assessment models for microplastics currently in use need to be improved to take into account the complexity and specificity of microplastics.

Detection and characterisation of microplastics in tap water from Gauteng, South Africa

This study reports the presence, concentration, and characteristics of microplastics (MPs) in tap water in three suburbs in Gauteng Province in South Africa. Physical characterisation was conducted using stereomicroscopy and scanning electron microscopy following staining of MPs with the Rose Bengal dye. The concentrations of MPs in all samples ranged from 4.7 to 31 particles/L, with a mean of 14 ± 5.6 particles/L. Small-sized (<1 mm) and fibrous-shaped MPs were most abundant in all samples. Fibers accounted for 83.1% of MPs in samples from all the three areas, followed by fragments (12.4%), pellets/beads (3.1%), and films (1.5%), with a minor variation in the distribution of shapes and sizes in samples from each area. Raman microspectroscopy was used for chemical analysis, and five polymers were identified, namely: high-density polyethylene, polyurethane, polyethylene terephthalate, poly(hexamethylene terephtalamide), and poly(acrylamide-co-acrylic acid). C.I Pigment Red 1, C.I. Solvent Yellow 4, Potassium indigotetrasulphonate, and C.I Pigment Black 7 were the colourants detected. These colourants are carcinogenic and mutagenic and are potentially toxic to humans. The prevalence of MPs in tap water implies their inadequate removal during water treatment. For instance, the presence of poly(AM-co-AA) suggests that drinking water treatment plants may be a potential source of MPs in tap water. Other polymers, e.g., high-density polyethylene may be released from pipes during the transportation of drinking water. The estimated daily consumption of MPs from tap water was 1.2, 0.71, and 0.50 particles/kg.day for children, men, and women, respectively. The findings of this study provide evidence of the presence of MPs in drinking water in South Africa, thus giving some insights into the performance of treatment plants in removing these contaminants and a benchmark for the formulation of standard limits for the amount of MPs in drinking water.

Occurrence and fate of microplastics from a water source to two different drinking water treatment plants in a megacity in eastern China

The widespread presence of microplastics (MPs) contamination in drinking water has raised concerns regarding water safety and public health. In this study, a micro-Raman spectrometer was used to trace the occurrence of MP transport from a water source to a drinking water treatment plant (DWTP)1 with an advanced treatment process and DWTP2 with a conventional treatment process and the contributions of different processes to the risk reduction of MPs were explored. Six types of MPs were detected: polyethylene terephthalate, polyethylene, polypropylene, polystyrene, polyamide, and polyvinyl chloride. 2-5 μm (35.8-41.2%) and polyethylene terephthalate (27.1-29.9%) were the most frequently detected MP sizes and types of water source samples, respectively. The abundance of MPs in treated water decreased by 72.7-83.0% compared to raw water. Ozonation and granular activated carbon (52.7%), and sand filtration (47.5%) were the most effective processes for removing MPs from DWTP1 and DWTP2, respectively. Both DWTPs showed significant removal effects on polyethylene terephthalate, with 80.0-88.1% removal rates. The concentrations of polystyrene increase by 30.0-53.4% after chlorination. The dominant components in the treated water of DWTP1 and DWTP2 were polypropylene (24.7%) and polyethylene 27.7%, respectively, and MPs of 2-5 μm had the highest proportion (55.3-64.3%). Pollution load index and potential ecological risk index of raw water treated by DWTPs were reduced by 48.0-58.7% and 94.5-94.7%, respectively. The estimated daily intake of MPs in treated water for infants was 45.5-75.0 items/kg/d, respectively, approximately twice that of adults. This study contributes to the knowledge gap regarding MP pollution in drinking water systems.

A review of microplastics in wastewater treatment plants in Türkiye: Characteristics, removal efficiency, mitigation strategies for microplastic pollution and future perspective

The effluent of WWTPs is an important source of microplastics (MP) for the aquatic environment. In this review study, MPs in wastewater treatment plants (WWTP) in Türkiye and their removal from WWTPs are reviewed for the first time. First, MP characteristics in the influent and effluent of WWTPs in Türkiye are discussed. In the next section, the abundance of MPs in the influent and effluent of WWTPs in Türkiye and the MP removal efficiency of WWTPs in Türkiye are evaluated. Then, the results of studies on MP abundance and characteristics in Türkiye's aquatic environments are presented and suggestions are made to reduce MPs released from WWTPs into the receiving environments. Strategies for reducing MPs released to the receiving environment from WWTPs of Türkiye are summarized. In the last section, research gaps regarding MPs in WWTPs in Türkiye are identified and suggestions are made for future studies. This review paper provides a comprehensive assessment of the abundance, dominant characteristics, and removal of MPs in WWTPs in Türkiye, as well as the current status and deficiencies in Türkiye. Therefore, this review can serve as a scientific guide to improve the MP removal efficiency of WWTPs in Türkiye.

Microplastics attenuation from surface water to drinking water: Impact of treatment and managed aquifer recharge - and identification uncertainties

River water can be used to recharge aquifers exploited for drinking water production. Several recent studies reported microplastics (MPs) in river water, and therefore, the potential contamination of groundwater by MPs is a growing concern among stakeholders and citizens. In this research, we investigate the fate of MPs (> 20 μm) along six different stages of a major Managed Aquifer Recharge (MAR)-water supply system in Switzerland. About 20 l of water were filtered using steel meshes at each location in triplicates. In the laboratory, MPs deposited on the anodisc filters were identified using Focal Plane Array (FPA) micro-Fourier-Transform-InfraRed (μFTIR) spectroscopy. The obtained hyperspectral data were processed using the imaging software Microplastics Finder for MPs identification and classification. Our results revealed a 20-fold decrease in MPs concentration from the Rhine River bed water (112 ± 27.4 MPs/l) to after the coagulation, flocculation and sedimentation (5.5 ± 2.2 MPs/l), a further 3-fold decrease to after the sand-filtration system (1.8 ± 0.9 MPs/l), corresponding to an overall removal efficiency of 98.4 %. The MPs concentrations remained low following MAR (2.7 ± 0.7 MPs/l) through a Quaternary gravel aquifer. Activated carbon filters did not substantially further reduce MPs concentrations. The percentage of fragments (≈95 %) prevailed over fibers (≈5 %) at all locations, with fibers being longer and more abundant in the river water. Overall, this study demonstrates the effectiveness of the treatment systems to remove MPs larger than 20 μm. Finally, we calculated an uncertainty in MPs concentrations of one order of magnitude depending on the user-defined parameters inside the MPs identification and classification model. The Quality Assurance/Quality Control approach followed during laboratory analysis highlighted an accumulation of surrogate particles at the edges of the disc, which would have an impact for MPs number upscaling.

Characteristics and seasonal variation of microplastics in the wastewater treatment plant: The case of Bursa deep sea discharge

Microplastics (MPs) are an emerging pollutant that can be detected in all ecosystems, especially aquatic ecosystems. Wastewater treatment plants (WWTPs) are important point sources of MP release into the sea. In this study, the characteristics of MPs in wastewater and sludge samples taken from different units of WWTP in Bursa-Gemlik district for 12 months were investigated. Wastewater and sludge samples collected from 7 different points were classified as size, shape, color, and counted. The amount of MP in the influent and effluent of the WWTP, respectively; 107.1 ± 40.2 MP/L and 4.1 ± 1.1 MP/L. Although the MP removal efficiency of the WWTP is 96.17 %, approximately 74,825,000 MP is discharged into the Marmara Sea every day. The amount of MP in the sludge is 14.3 ± 7.1 MP/g. The amount of MP accumulated in 22tons of waste sludge formed daily in WWTP was calculated as 314,600,000 MP, and the annual accumulated amount was calculated as approximately 1.15 × 1011 MP. The MPs in the WWTP were mainly 1-0.5 mm in size. Fibers were the dominant MP shape in both the wastewater and sludge samples. Black and transparent were the dominant MP colors. Seven different polymer types of MPs were detected, which were mainly types of polyethylene, polypropylene, and polyethylene terephthalate. Despite the high removal efficiency in the investigated WWTP, it has been shown that it acts as an important source of MPs to the sea ecosystem due to the high discharge rates.

A review of microplastic removal from water and wastewater by membrane technologies

Microplastics (MPs) cannot be completely removed from water/wastewater in conventional wastewater treatment plants (WWTPs) and drinking water treatment plants (DWTPs). According to the literature analysis, membrane technologies, one of the advanced treatment technologies, are the most effective and promising technologies for MP removal from water and wastewater. In this paper, firstly, the properties of MPs commonly present in WWTPs/DWTPs and the MP removal efficiency of WWTPs/DWTPs are briefly reviewed. In addition, research studies on MP removal from water/wastewater by microfiltration (MF), ultrafiltration (UF), nanofiltration (NF), reverse osmosis (RO), and membrane bioreactors (MBRs) are reviewed. In the next section, membrane filtration is compared with other methods used for MP removal from water/wastewater, and the advantages/disadvantages of the removal methods are discussed. Moreover, the problem of membrane fouling with MPs during filtration and the potential for MP release from polymeric membrane structure to water/wastewater are discussed. Finally, based on the studies in the literature, the current status and research deficiencies of MP removal by membrane technologies are identified, and recommendations are made for further studies.

New insight into the effect of microplastics on antibiotic resistance and bacterial community of biofilm

Microplastics (MPs) could serve as substrates for microbial colonization and biofilm formation. However, research on the effects of different types of microplastics and natural substrates on biofilm formation and community structure in the presence of antibiotic-resistant bacteria (ARB) is limited. In this study, we employed by means of microcosm experiments to analyze the situation of biofilms conditions, bacterial resistance patterns, antibiotic resistance genes (ARGs) distribution, and bacterial community on different substrates using microbial cultivation, high throughtput sequencing and PCR. The result showed that biofilms on different substrates markedly increased with time, with MPs surfaces formed more biofilm than stone. Analyses of antibiotic resistant showed negligible differences in the resistance rate to the same antibiotic at 30 d, but tetB would be selectively enriched on PP and PET. The microbial communities associated with biofilms on MPs and stones exhibited variations during different stages of formation. Notably, phylum WPS-2 and Epsilonbacteraeota were identified as the dominant microbiomes of biofilms on MPs and stones at 30 d, respectively. Correlation analysis suggested that WPS-2 could potentially be a tetracycline-resistant bacterium, while Epsilonbacteraeota did not correlate with any detected ARB. Our results emphasized the potential threat posed by MPs as attachment carriers for bacteria, particularly ARB, in aquatic environments.