Fabrication of a polymeric ionic liquid-based adsorbent for multiple monolithic fiber solid-phase microextraction of endocrine disrupting chemicals in complicated samples

Preparation of novel cationic porous polymers for effective pre-concentration and sensitive detection of endocrine disruptors in water and fish

BACKGROUND

Phenolic endocrine disrupting chemicals (EDCs) that are widely present in water environment can mimic hormones and interfere with the endocrine system, posing a severe threat to human health. Therefore, there is an urgent need to develop sensitive methods to effectively monitor phenolic EDCs in environment water and seafood products. In this study, a novel quaternary ammonium cationic porous polymer (AC-HCP3) was synthesized and a new analytical method was established by using AC-HCP3 as solid phase extraction adsorbent in combination with high-performance liquid chromatography, achieving the sensitive and reliable detection of phenolic EDCs in fish and environmental water.

RESULTS

The developed AC-HCP3 has high stability, positive ionic feature and good recycle utilization, achieving high enrichment efficiency that is unsusceptible to pH for several EDCs, including bisphenol F, bisphenol A, bisphenol B, and p-tert-butylphenol. The high enrichment efficiency is proved to be the synergistic effects of π-π conjugation, hydrogen bonding, and electrostatic interactions. Based on AC-HCP3, a feasible and practical detection method was established and employed for determining several phenolic EDCs in fish (Basa fish and tilapia) and environmental water. The method achieved low detection limits of 1.67-7.80 ng g-1 for fish and 0.004-0.02 ng mL-1 for environmental water, with recoveries of 80.7 %-118 % and relative standard deviations ≤8.40 %. The adsorption capacity of AC-HCP3 ranged from 68.73 to 128.53 mg g-1. Compared with other reported methods, the developed method offers high sensitivity, efficiency and applicability.

SIGNIFICANCE

Herein, for the first time, we designed and synthesized a novel ionic porous polymer (AC-HCP3) through simple preparation process (one-step Friedel-Crafts alkylation reaction). The AC-HCP3 displayed an outstanding adsorption effect in harsh environments such as strong acids and alkalis. This work not only provides a feasible approach for the construction of ionic porous polymers, but also provides an alternative approach for the effective monitoring of phenolic EDCs in complex food and environmental samples.

Novel ferrofluid based on hydrophobic deep eutectic solvents for separation and analysis of trace estrogens in environmental water and urine samples

A novel ferrofluid prepared from a hydrophobic deep eutectic solvent (DES) and Fe3O4@graphite composite materials was introduced as a green microextraction medium for the separation and enrichment of trace estrogens in real samples. It was found that the ferrofluid greatly improved the capacity and selectivity of target analytes, benefiting from the enrichment of both DES and Fe3O4@graphite composite materials. Using a combination of high-performance liquid chromatography-fluorescence detection (HPLC-FLD) and vortex-assisted liquid-liquid microextraction (VALLME), a new method was established for simultaneous rapid processing and accurate determination of three estrogens (estradiol [E2], estriol [E3], and ethinyl estradiol [EE2]) in environmental water and urine samples. Key parameters affecting the extraction efficiency were optimized using a single-factor approach and response surface methodology. Under optimal conditions, this method yielded a low limit of detection (1.01 ng L-1, 3.03 ng L-1, and 25.0 ng L-1 for EE2, E2, and E3, respectively), wide linear range (3-200,000 ng L-1), high enrichment factors (9.81-47.2), and satisfactory recovery (73.8-129.0%). Compared with traditional analytical techniques, this method avoids the use of volatile toxic organic extraction solvents and cumbersome phase separation operations.

Solid-phase microextraction - a future technique in pharmacology and coating trends

Traditional sample preparation techniques based on liquid-liquid extraction (LLE) or solid-phase extraction (SPE) often suffer from a major error due to the matrix effects caused by significant co-extraction of matrix components. The implementation of a modern extraction technique such as solid-phase microextraction (SPME) was aimed at reducing analysis time and the use of organic solvents, as well as eliminating pre-analytical and analytical errors. Solid-phase microextraction (SPME) is an innovative technique for extracting low molecular weight compounds (less than 1500 Da) from highly complex matrices, including biological matrices. It has a wide range of applications in various types of analysis including pharmaceutical, clinical, metabolomics and proteomics. SPME has a number of advantages over other extraction techniques. Among the most important are low environmental impact, the ability to sample and preconcentrate analytes in one step, simple automation, and the ability to extract multiple analytes simultaneously. It is expected to become, in the future, another method for cell cycle research. Numerous available literature sources prove that solid-phase microextraction can be a future technique in many scientific fields, including pharmaceutical sciences. This paper provides a literature review of trends in SPME coatings and pharmacological applications.

Preparation of amino-functionalized triazine-based hyper-crosslinked polymer for efficient adsorption of endocrine disruptors

Herein, two novel amino-functionalized triazine-based hyper-crosslinked porous polymer (NH2-HCPs) (named as DPT-BB, DPT-DX) were designed and synthesized by direct crosslinking of 2,4-diamino-6-phenyl-1,3,5-triazine (DPT) with 4,4'-bis(chloromethyl)-1,1'-biphenyl (BB) or α, α'-dichloro-p-xylene (DX). Thanks to the amino functional group and hyper-crosslinked porous structure, NH2-HCPs displayed remarkable adsorption ability for phenolic EDCs. The adsorption mechanism mainly involved hydrogen bond, π-π interaction, hydrophobic interaction and pore filling. Thus DPT-BB was applied as solid phase extraction sorbent to extract phenolic EDCs from water and orange juice samples prior to quantitative analysis by high performance liquid chromatography. Under the optimal conditions, detection limit as low as 0.07-0.2 ng mL-1 for water and 0.1-0.27 ng mL-1 for orange juice was achieved. Good recoveries spanned the range of 83.5%-114% were obtained for spiked samples, with relative standard deviations below 8.9%. The results demonstrated that the developed method displayed excellent practicability for sensitive analysis of EDCs.

Synthesis of amine-functionalized magnetic porous organic polymers for effective extraction of phenolic endocrine disrupting chemicals

Amine-functionalized porous organic polymers (EDA-POP-PC and EDA-POP-BT) were prepared by post-modification of POP-PC and POP-BT with ethylenediamine (EDA) for the first time. The POP-PC and POP-BT were obtained through Friedel-Crafts acylation reaction of potassium tetraphenylborate with p-phthaloyl chloride (PC) and 1,3,5-benzenetricarbonyl trichloride (BT), respectively. The EDA-POPs exhibited superior adsorption capacity for phenolic endocrine disrupting chemicals (EDCs). After magnetically functionalization, the obtained M-EDA-POP-PC was employed as a magnetic adsorbent for enrichment of phenolic EDCs from real samples prior to high performance liquid chromatography-ultraviolet detection. The current strategy showed low detection limits (S/N = 3) of 0.02-0.07, 0.04-0.08 and 0.04-0.10 ng mL-1 for river water, white peach juice and lychee juice, respectively. The method recoveries were 81.7%-115% with relative standard deviations below 8.6%. The proposed strategy showed good practicality for sensitive determination of phenolic EDCs in real samples.

Poly(ionic liquid)-hybridized silica aerogel for solid-phase microextraction of polycyclic aromatic hydrocarbons prior to gas chromatography-flame ionization detection

Using poly(ionic liquid) (PIL) and tetraethyl orthosilicate (TEOS) as the co-precursors, PIL-hybridized silica aerogel was prepared via sol-gel method for solid-phase microextraction (SPME). The ratio between PIL and TEOS was regulated to achieve the best extraction effect. The aerogel was coated onto the surface of stainless steel wire to get SPME fiber. Coupled to gas chromatography-flame ionization detector (GC-FID), the fiber was separately evaluated by the determination of alkanes, polycyclic aromatic hydrocarbons (PAHs), as well as BTEX (benzene, toluene, ethylbenzene, and xylenes) in immersion mode. The extraction performance of PAHs was attributed to π stacking and hydrophobic effect. After optimization of main extraction and desorption conditions, the SPME-GC-FID method was established towards eight PAHs, and it provided low detection limits (0.005 μg L^-1, 0.010 μg L^-1) and wide linear ranges (0.016-20.00 μg L^-1, 0.033-20.00 μg L^-1) with good linear coefficients (0.9991-0.9998). The method was applied to detect trace PAHs in real water samples, with relative recoveries of 86.2-119.2%. Furthermore, PIL-hybridized silica aerogel exhibits some superiorities like higher sensitivity, shorter extraction time, and better repeatability over other extraction coatings. The present work not only extends the range of aerogel materials but also promoted their further applications in sample preparation. Graphical abstract.

Highly Sensitive Determination of Bisphenol A in Bottled Water Samples by HPLC after Its Extraction by a Novel Th-MOF Pipette-Tip Micro-SPE

In this study, a novel thorium metal organic framework was synthesized, characterized and used as a sorbent for very efficient pipette tip micro solid-phase extraction of bisphenol A in bottled drinking water samples using high-performance liquid chromatography as detecting instrument. Parameters which influence extraction efficiency such as pH, sample volume, amount of sorbent, type and volume of eluent, number of aspirating and dispensing cycles for extraction and elution, and volume of the sample solution were studied and optimized. A linear calibration curve was obtained in the range of 0.002–0.456 ng mL−1 (r2 = 0.996) with a detection limit of 0.0010 ng mL−1. Repeatability of batch-to-batch extraction was better than 5.0% and a reproducibility of 3.2% for real samples obtained.

Recent Applications and Newly Developed Strategies of Solid-Phase Microextraction in Contaminant Analysis: Through the Environment to Humans

The present review aims to describe the recent and most impactful applications in pollutant analysis using solid-phase microextraction (SPME) technology in environmental, food, and bio-clinical analysis. The covered papers were published in the last 5 years (2014–2019) thus providing the reader with information about the current state-of-the-art and the future potential directions of the research in pollutant monitoring using SPME. To this end, we revised the studies focused on the investigation of persistent organic pollutants (POPs), pesticides, and emerging pollutants (EPs) including personal care products (PPCPs), in different environmental, food, and bio-clinical matrices. We especially emphasized the role that SPME is having in contaminant surveys following the path that goes from the environment to humans passing through the food web. Besides, this review covers the last technological developments encompassing the use of novel extraction coatings (e.g., metal-organic frameworks, covalent organic frameworks, PDMS-overcoated fiber), geometries (e.g., Arrow-SPME, multiple monolithic fiber-SPME), approaches (e.g., vacuum and cold fiber SPME), and on-site devices. The applications of SPME hyphenated with ambient mass spectrometry have also been described.

Recent advances in the detection of 17β-estradiol in food matrices: A review

Pollution of endocrine disrupting chemicals has become a global issue. As one of the hormonally active compounds, 17β-estradiol produces the strongest estrogenic effect when it enters the organism exogenously including food intakes, bringing potential harmfulness such as malfunction of the endocrine system. Therefore, in order to assure food safety and avoid potential risks of 17β-estradiol to humans, it is of great significance to develop rapid, sensitive and selective approaches for the detection of 17β-estradiol in food matrices. In this review, the harmfulness and main sources of 17β-estradiol are firstly introduced, followed by the description of the principles and applications of different approaches for 17β-estradiol detection including high performance liquid chromatography, electrochemistry, Raman spectroscopy, fluorescence and colorimetry. Particularly, applications in detecting 17β-estradiol in food matrices over the years of 2010-2018 are discussed. Finally, advantages and limitations of these detection methods are highlighted and perspectives on future developments in the detection methods for 17β-estradiol are also proposed. Although many detection approaches can achieve trace or ultratrace detection of 17β-estradiol, further studies should be focused on the development of in-situ and real-time methods to monitor and evaluate 17β-estradiol for food safety.

An organic-inorganic hybrid silica aerogel prepared by co-precursor method for solid-phase microextraction coating

In order to improve the extraction performance of silica aerogel, an organic-inorganic hybrid silica aerogel was developed as the coating of solid-phase microextraction (SPME). It was prepared via the co-precursor reaction between tris(triethoxysilylpropyl)amine and tetraethyl orthosilicate. Coupled with gas chromatography, the hybrid silica aerogel-coated SPME fiber was evaluated using polycyclic aromatic hydrocarbons (PAHs). Compared to silica aerogel, the hybrid silica aerogel displayed better extraction performance, peak areas of PAH analytes were increased by about 2 times. The affecting parameters including extraction time, extraction temperature, ionic strength, stirring rate and desorption time were optimized, and an analytical method was established with wide linear ranges (0.005-20 μg L^-1, 0.010-20 μg L^-1, 0.100-20 μg L^-1), good correlation coefficients (0.9967-0.9994), low limits of detection (0.001-0.030 μg L^-1) and limits of quantitation (0.005-0.100 μg L^-1). Satisfactory extraction repeatability (RSD≤6.1%, n = 3) and preparation repeatability (RSD ≤ 9.8%, n = 3) were also obtained. Compared to the reported coatings and the commercial coating, the organic-inorganic hybrid silica aerogel has higher or comparable sensitivity, better repeatability, and shorter extraction time and longer service life. The established method was used for the detection of lake water and rain water, and some targets were quantified successfully.

A fast and simple air-assisted liquid-liquid microextraction procedure for the simultaneous determination of bisphenols, parabens, benzophenones, triclosan, and triclocarban in human urine by liquid chromatography-tandem mass spectrometry

The increasing awareness and public concern with hazard exposure to endocrine-disrupting chemicals calls for methods capable to handle numerous samples in short analysis time. In this present study, a novel method combining air-assisted liquid-liquid microextraction and liquid chromatography coupled to mass spectrometry was developed and validated for the extraction, preconcentration, and determination of 7 bisphenols (bisphenol A, bisphenol S, bisphenol AP, bisphenol P, bisphenol F, bisphenol AF, bisphenol Z), 7 parabens (methyl-, ethyl-, propyl-, butyl-, benzyl-paraben, methyl-protocatechuic acid, and ethyl-protocatechuic acid), 5 benzophenones (benzophenone-1, benzophenone-2, benzophenone-3, benzophenone-8, and 4-hydroxybenzophenone), and two antimicrobials (triclosan and triclocarban) in human urine samples. Type and volume of solvent, extraction time (cycles), pH sample, ionic strength, agitation, and needle dimensions were evaluated. The matrix-matched calibration curves of all analytes were linear with correlation coefficients higher than 0.99 in the range level of 1.0-20.0 ng mL^-1. The relative standard deviation, precision, at three concentrations (1.0, 10.0 and 20.0 ng mL^-1) was lower than 15% with accuracy ranging from 90% to 114%. The biomonitoring capability of the new proposed method was confirmed with the analysis of 50 human urine samples randomly collected from Brazilian children. High urinary concentrations of several EDCs associated with usage of personal care products were found.

Fabrication of an ionic-liquid-based polymer monolithic column and its application in the fractionation of proteins from complex biosamples

An ionic-liquid-based polymer monolithic column was synthesized by free radical polymerization within the confines of a stainless-steel column (50 mm × 4.6 mm id). In the processes, ionic liquid and stearyl methacrylate were used as dual monomers, ethylene glycol dimethacrylate as the cross-linking agent, and polyethylene glycol 200 and isopropanol as co-porogens. Effects of the prepolymerization solution components on the properties of the resulting monoliths were studied in detail. Scanning electron microscopy, nitrogen adsorption-desorption measurements, and mercury intrusion porosimetry were used to investigate the morphology and pore size distribution of the prepared monoliths, which showed that the homemade ionic-liquid-based monolith column possessed a relatively uniform macropore structure with a total macropore specific surface area of 44.72 m² /g. Compared to a non-ionic-liquid-based monolith prepared under the same conditions, the ionic-liquid-based monolith exhibited excellent selectivity and high performance for separating proteins from complex biosamples, such as egg white, snailase, bovine serum albumin digest solution, human plasma, etc., indicating promising applications in the fractionation and analysis of proteins from the complex biosamples in proteomics research.

Preparation and application of a poly (ionic liquid)-based molecularly imprinted polymer for multiple monolithic fiber solid-phase microextraction of phenolic acids in fruit juice and beer samples

A novel poly (ionic liquid)-based molecularly imprinted polymer for multiple monolithic fiber solid-phase microextraction of phenolic acids.