Electroporation-based applications in biotechnology

Bystander effect of metal byproducts released from electroporated cells after electroporation in vitro

Electrodes dissolution during electroporation releases metal ions into the medium, altering the microenvironment of electroporated cells and allowing metal ions to penetrate cell membrane. During cell membrane repair, homeostasis restoration or activation of cell death pathways, cells eliminate excess metals from the cytoplasm and membrane. This study assessed the effects of post-electroporation metal byproducts on untreated (non-electroporated) cells in vitro. CHO and HCT116 cells were electroporated with three pulse protocols (unipolar: 100 μs, 5 ms; bipolar: 2 μs) using either aluminum or stainless-steel electrodes. After electroporation, cells were transferred to fresh growth medium and incubated for 2 or 4 h. Incubation period allowed either cell recovery or the activation of cell death pathways, leading to the accumulation of metal byproducts in the incubation medium. Stainless-steel electrodes with the 5 ms pulse protocol caused a considerable increase in iron, chromium and nickel ions in incubation medium compared to aluminum electrodes or other protocols. Metal ions in incubation medium caused toxicity in non-electroporated cells, disrupting cell cycle function or inducing cell death. The observed toxicity results from combined effects of metal ions on cellular functions and the mechanisms the cells use to protect themselves from metal overload.

Current Advances and Future Prospects of Bulk and Microfluidic-Enabled Electroporation Systems

Reversible electroporation (EP) is a pivotal biophysical technology that leverages pulsed electric fields to enhance the permeability of cell membranes, thereby facilitating the introduction of foreign material into cells. In this review, we provide an overview of bulk electroporators and microfluidic-enabled EP systems, focusing on their controversial points of mechanisms, architectures, and parameter settings. Bulk electroporators have been extensively commercialized with settled form including pulse generator and accessories (i.e., EP cuvette and plates). Researchers have made efforts to increase the throughput and simplify the operation of bulk EP systems. Additionally, microfluidics has emerged as a promising technology for optimizing EP parameters and enhancing the performance. Given the significant structural differences between these two types of EP systems, their operating conditions such as temperature, voltage, and pulse parameters are discussed. Research tend to operate single cells under more concentrated electric field induced by low voltage, enabling a quantitative exogenous materials delivery and numerical simulation. However, due to cost constraints and properties of materials utilized in laboratories, the commercialization of laboratory prototypes has been impeded. Furthermore, the technological limitations, current commercialization status, and development trends have been examined.

Brief guide to gene cloning

Analysis and manipulation of DNA is fundamental to understand gene function and expression. Gene cloning is a routine and versatile technique for molecular biology, allowing isolation, amplification, and production of recombinant DNA molecules. Here, we provide an overall process, various types, and applications of gene cloning. This concise guide will be useful for researchers who are unfamiliar with gene cloning, focusing on key principles and experimental considerations for efficient DNA analysis.

Assessing liposomal nanocarriers for targeted drug delivery through electroporation

Electroporation (EP) is a technique that temporarily increases cell membrane permeability through high-voltage electrical pulses, facilitating the internalization of hydrophilic drugs. When used in clinics, reversible EP offers significant advantages in drug delivery with minimal systemic toxicity, making it a promising approach in cancer therapy (Electrochemotherapy). However, is still challenging to increase therapeutic efficacy, such as increasing the amount of drug internalized by cells after EP. To address these limitations, integrating nanocarriers-particularly liposomes-into EP-based drug delivery strategies has shown great promise. Due to their structural similarity to cell membranes, liposomes can undergo electroporation without causing irreversible cell damage, enabling localized and controlled drug release at targeted sites. This study preliminary evaluates the effectiveness of positively charged gentamicin sulfate loaded liposomes (GS-Lipo) in enhancing gentamicin sulfate uptake through electroporation. The focus is on liposome behavior under EP, drug release, and cellular internalization. The results reveal a strong interplay between liposomes and EP. While EP minimally affects liposome size (sizes lower than 250 nm before and after EP) and PDI, it significantly enhances intracellular uptake and drug release by creating transient pores in liposomal bilayer, facilitating gentamicin diffusion. In vitro uptake studies performed with fluorescent liposomes and GS-Lipo, confirmed superior performance when combined treatment (EP + GS-Lipo) is used. By optimizing electroporation parameters (160 V, 200 V, and 250 V), this study succeeds in maximizing intracellular drug concentration, with the long-term goal of improving therapeutic outcomes, particularly in cancer treatment.

Enhanced transdermal permeation of caffeine through a skin model using electric field-induced lipid vesicles: a novel approach for drug transport

Caffeine is a highly beneficial compound for human health, known for its anticancer, anti-inflammatory, and antioxidant properties, particularly in protecting the skin from UVB radiation damage. Although caffeine shows excellent potential for transdermal delivery, its hydrophilic nature often requires a chemical enhancer for effective transport. Traditional methods like iontophoresis and electroporation utilize external electric fields to create micro-pores in the skin, enhancing the delivery of hydrophilic molecules. While electroporation is well understood, the molecular mechanisms of iontophoresis are unclear. This investigation presents an innovative mechanism for caffeine transport from an aqueous solution without chemical enhancers using lipid vesicles generated by external electric fields. To investigate the caffeine transdermal transport process, we combined our iontophoresis methodology with molecular dynamics simulations using Gromacs and the Martini force field alongside a practical custom experiment. Our approach employed a constant electric field of 22-25 mV nm-1, successfully generating lipid vesicles that transport caffeine molecules. Notably, alternating electric fields at 306 K (physiological skin temperature) increased caffeine transport by 20%, and at 323 K, we achieved an impressive 300% increase compared to scenarios without electric fields. Our homemade Franz cell setup showed a permeation rate dependent on the electric field correlated with vesicle formation. Additionally, hyperspectral Raman mapping identified unsaturated carbon and C-N groups as key contributors to vesicle and pore instability. This groundbreaking approach offers significant potential for enhancing transdermal drug delivery systems.

Chlorella sp. as a promising protein source: insight to novel extraction techniques, nutritional and techno-functional attributes of derived proteins

Amidst the mounting environmental crises and ever-increasing global population, the quest for sustainable food production and resource utilization solutions has taken center stage. Microalgae, with Chlorella species at the forefront, present a promising avenue. They serve as a bountiful protein source and can be conveniently grown in waste streams, thereby tackling food security, environmental sustainability, and economic feasibility. This article embarks on a comprehensive journey through recent research on Chlorella by shedding light on its unique characteristics, its market value, cultivation techniques, and harvesting methods. It also delves into traditional and innovative extraction methods, underscoring the hurdles and breakthroughs in achieving high protein yields from the Chlorella biomass. Moreover, exploration of the protein's nutritional properties, bioactive peptides, and techno-functional attributes, enhance its potential for food applications. Further, this review also examines current market trends in consumer acceptance of this alternative protein and discusses strategies for reducing greenhouse gas emissions in their production. By providing invaluable insights into the current status and future prospects of Chlorella protein, it aspires to make a significant contribution to the ongoing dialogue on sustainable food production and resource management.

Development of a Pre-Modification Strategy to Overcome Restriction-Modification Barriers and Enhance Genetic Engineering in Lactococcus lactis for Nisin Biosynthesis

Due to the barriers imposed by the restriction-modification (RM) system, Nisin-producing industrial strains of Lactococcus lactis often encounter low transformation efficiency, which seriously hinders the widespread application of genetic engineering in non-model L. lactis. Herein, we present a novel pre-modification strategy (PMS) coupled with optimized plasmid delivery systems designed to systematically evade RM barriers and substantially improve Nisin biosynthesis in L. lactis. Through the use of engineered Escherichia coli strains with methylation profiles specifically optimized for L. lactis C20, we have effectively evaded RM barriers, thereby facilitating the efficient introduction of large Nisin biosynthetic gene clusters into L. lactis. The PMS tools, which significantly improve the transformation efficiency (~103 transformants per microgram of DNA), have been further improved in combination with a Rolling Circle Amplification, resulting in a higher enhancement in transformation efficiency (~104 transformants per microgram of DNA). Using this strategy, large Nisin biosynthetic gene clusters and the expression regulation of all genes within the cluster were introduced and analyzed in L. lactis, leading to a highest Nisin titer of 11,052.9 IU/mL through a fed-batch fermentation in a 5 L bioreactor. This is the first systematic report on the expression regulation and application of a complete Nisin biosynthesis gene cluster in L. lactis. Taken together, our studies provide a versatile and efficient strategy for systematic evasion and enhancement of RM barriers and Nisin biosynthesis, thereby paving the way for genetic modification and metabolic engineering in L. lactis.

Effects of electroporation on Acanthamoeba Polyphaga

BACKGROUND

Species of the genus Acanthamoeba spp. are ubiquitous and can cause Acanthamoeba keratitis (AK), a serious corneal infection. Due to the toxicity and ineffectiveness of currently available prolonged therapies, we investigated electroceutical treatment aimed at facilitating the permeation of molecules through the membrane of cysts and trophozoites, which allows for faster elimination of the parasite.

METHODS

Cysts and trophozoites of Acanthamoeba polyphaga (ATCC® 30461TM) were exposed in vitro to an electric field with intensities of 2,000 volts and 2,500 volts. Viability after electroporation was assessed by the exclusion method with 0.4% trypan blue dye, while permeabilization was assessed by fluorescence microscopy using propidium iodide (PI), since both are impermeable to the membrane of viable and intact cells. The images were acquired on a Nikon Eclipse TI-U microscope and analyzed using ImageJ software.

RESULTS

With regard to viability, 40% of the trophozoites electroporated at 2,000 V and 42% of those electroporated at 2,500 V were lost, while for cysts the loss was 13% and 16% respectively. Considering permeabilization, 55% of trophozoites and cysts were permeabilized at 2,000 V (p ≤ 0.05); and 59% at 2,500 V for both (p ≤ 0.05). Values of p < 0.05 were considered statistically significant.

CONCLUSION

The voltages tested were effective for both cysts and trophozoites, since the percentages of permeabilization were close, with no statistical significance between them, only with the control groups. These results suggest the possibility that an electroceutical treatment could be applied as a complement to the standard treatment for AK.

Integrated inactivation of Microcystis aeruginosa and degradation of microcystin-LR by direct current glow discharge plasma in liquid-phase: Mechanisms and cell deactivation process

The frequent occurrence of blooms of Microcystis aeruginosa (M. aeruginosa) and the subsequent release of microcystin-LR (MC-LR) in eutrophic waters pose a serious threat to aquatic ecosystems. This study investigated the optimal conditions for inactivating M. aeruginosa and the degrading MC-LR using direct current glow discharge plasma in liquid phase (DC-LGDP), analyzed the potential inactivation mechanisms and the cell deactivation process of M. aeruginosa. The results showed that DC-LGDP generated reactive species (i.e., •OH, 1O2, and H2O2), active Cl and electroporation effect collectively contributed to inactivation of M. aeruginosa and degradation of MC-LR. The 97.07 % inactivation efficiency of M. aeruginosa and 94.98 % degradation rate of MC-LR were achieved with higher energy yield and without generating nitrogen oxides. Meanwhile, DC-LGDP destroyed the cell integrity, eliminated their antioxidant capacity and reduced the content of photosynthetic pigments. The transcriptome analysis indicated that the transcripts of genes related to photosynthesis, ribosome biosynthesis, ABC transporters, and nitrogen metabolism pathway in M. aeruginosa were altered by DC-LGDP. This study provides insights into the inactivation of M. aeruginosa by DC-LGDP, while elucidating the potential inactivation mechanisms and the cell deactivation process involved. It may be important for the eco-friendly inactivation of M. aeruginosa blooms in natural water bodies.

Recent advances in poly(amino acids), polypeptides, and their derivatives in drug delivery

Poly(amino acids), polypeptides, and their derivatives have demonstrated significant potential as biodegradable biomaterials in the field of drug delivery. As degradable drug carriers, they can effectively load or conjugate drug molecules including small molecule drugs, nucleic acids, peptides, and protein-based drugs, enhancing the stability and targeting of the drugs in vivo. This strategy ultimately facilitates precise drug delivery and controlled release, thereby improving therapeutic efficacy and reducing side effects within the body. This review systematically describes the structural characteristics and preparation methods of poly(amino acids) and polypeptides, summarizes the advantages of poly(amino acids), polypeptides, and their derivatives in drug delivery, and detailedly introduces the latest advancements in this area. The review also discusses current challenges and opportunities associated with poly(amino acids), peptides, and their derivatives, and offers insights into the future directions for these biodegradable materials. This review aims to provide valuable references for scientific research and clinical translation of biodegradable biomaterials based on poly(amino acids) and peptides.

Electric stimulation: a versatile manipulation technique mediated microbial applications

Electric stimulation (ES) is a versatile technique that uses an electric field to manipulate microorganisms individually. Over the past several decades, the capabilities of ES have expanded from bioremediation to the precise motion control of cells and microorganisms. However, there is limited information on the underlying mechanisms, latest advancement and broader microbial applications of ES in various fields, such as the production of extracellular polymers with upgraded properties. This review article summarizes recent advancements in ES and discusses it as a unique external manipulation technique for microorganisms with wide applications in bioremediation, industry, biofilm deactivation, disinfection, and controlled biosynthesis. One specific application of ES discussed in this review is the extracellular biosynthesis, regulation, and organization of extracellular polymers, such as bacterial cellulose nanofibrils, curdlan, and microbial nanowires. Overall, this review aims to provide a platform for microbial biotechnologists and synthetic biologists to leverage the manipulation of microorganisms using ES for bio-based applications, including the production of extracellular polymers with enhanced properties. Researchers can engineer, manipulate, and control microorganisms for various applications by harnessing the potential of electric fields.

Local Electric Field-Incorporated In-Situ Copper Ions Eliminating Pathogens and Antibiotic Resistance Genes in Drinking Water

BACKGROUND/OBJECTIVES

Pathogen inactivation and harmful gene destruction from water just before drinking is the last line of defense to protect people from waterborne diseases. However, commonly used disinfection methods, such as chlorination, ultraviolet irradiation, and membrane filtration, experience several challenges such as continuous chemical dosing, the spread of antibiotic resistance genes (ARGs), and intensive energy consumption.

METHODS

Here, we perform a simultaneous elimination of pathogens and ARGs in drinking water using local electric fields and in-situ generated trace copper ions (LEF-Cu) without external chemical dosing. A 100-μm thin copper wire placed in the center of a household water pipe can generate local electric fields and trace copper ions near its surface after an external low voltage is applied.

RESULTS

The local electric field rapidly damages the outer structure of microorganisms through electroporation, and the trace copper ions can effectively permeate the electroporated microorganisms, successfully damaging their nucleic acids. The LEF-Cu disinfection system achieved complete inactivation (>6 log removal) of Escherichia coli O157:H7, Pseudomonas aeruginosa PAO1, and bacteriophage MS2 in drinking water at 2 V for 2 min, with low energy consumption (10-2 kWh/m3). Meanwhile, the system effectively damages both intracellular (0.54~0.64 log) and extracellular (0.5~1.09 log) ARGs and blocks horizontal gene transfer.

CONCLUSIONS

LEF-Cu disinfection holds promise for preventing horizontal gene transfer and providing safe drinking water for household applications.

Enabling high-sensitivity live single-cell mass spectrometry using an integrated electrical lysis and nano electrospray ionization interface

BACKGROUND

Live single-cell metabolomic studies encounter inherent difficulties attributed to the limited sample volume, minimal compound quantity, and insufficient sensitivity in the Mass Spectrometry (MS) method used to obtain single-cell data. However, understanding cellular heterogeneity, functional diversity, and metabolic processes within individual cells is essential. Exploring how individual cells respond to stimuli, including drugs, environmental changes, or signaling molecules, offers insights into biology, oncology, and drug discovery. Efficient release of cell contents (lysis) is vital for accurate metabolite detection at the single-cell level. Despite this, traditional approaches in live single cell metabolomics methods do not emphasize efficient lysis to prevent sample dilution. Instead, current live single cell metabolomics methods use direct infusion to introduce the cell into the mass spectrometry without prior chromatographic separation or a lysis step, which adversely affects sensitivity and metabolic coverage.

RESULTS

To address this, we developed an integrated single-cell electrical lysis and nano spray (SCEL-nS) platform coupled to an Orbitrap MS capable of efficiently lysing a single cell after being sampled with specially manufactured micropipettes. Lysis efficiency was validated by comparing live cell stain fluorescent intensities of intact and electrically lysed cells through microscopy imaging. The SCEL-nS platform successfully induced the breakdown of a single cell, significantly reducing the live cell stain's fluorescent intensity indicating cell membrane breakdown. Additionally, SCEL-nS was validated by measuring single cells spiked with the anti-cancer drug tamoxifen by MS. SCEL-nS use resulted in statistically significant increase in the peak measured by the method compared to the traditional non-lysis method.

SIGNIFICANCE

Overall, our results demonstrate that the newly incorporated SCEL-nS platform achieved higher sensitivities compared to traditional live single cell analysis methods.

Electroporation enhances cell death in 3D scaffold-based MDA-MB-231 cells treated with metformin

Triple-negative breast cancer (TNBC), the most aggressive subtype of breast cancer lacks estrogen, progesterone, and HER2 receptors and hence, is therapeutically challenging. Towards this, we studied an alternate therapy by repurposing metformin (FDA-approved type-2 diabetic drug with anticancer properties) in a 3D-scaffold culture, with electrical pulses. 3D cell culture was used to simulate the tumor microenvironment more closely and MDA-MB-231, human TNBC cells, treated with both 5 mM metformin (Met) and 8 electrical pulses at 2500 V/cm, 10 µs (EP1) and 800 V/cm, 100 µs (EP2) at 1 Hz were studied in 3D and 2D. They were characterized using cell viability, reactive oxygen species (ROS), glucose uptake, and lactate production assays at 24 h. Cell viability, as low as 20 % was obtained with EP1 + 5 mM Met. They exhibited 1.65-fold lower cell viability than 2D with EP1 + 5 mM Met. ROS levels indicated a 2-fold increase in oxidative stress for EP1 + 5 mM Met, while the glucose uptake was limited to only 9 %. No significant change in the lactate production indicated glycolytic arrest and a non-conducive environment for MDA-MB-231 growth. Our results indicate that 3D cell culture, with a more realistic tumor environment that enhances cell death using metformin and electrical pulses could be a promising approach for TNBC therapeutic intervention studies.

Analysis of magnetic resonance contrast agent entrapment following reversible electroporation in vitro

BACKGROUND

Administering gadolinium-based contrast agent before electroporation allows the contrast agent to enter the cells and enables MRI assessment of reversibly electroporated regions. The aim of this study was evaluation of contrast agent entrapment in Chinese hamster ovary (CHO) cells and comparison of these results with those determined by standard in vitro methods for assessing cell membrane permeability, cell membrane integrity and cell survival following electroporation.

MATERIALS AND METHODS

Cell membrane permeabilization and cell membrane integrity experiments were performed using YO-PRO-1 dye and propidium iodide, respectively. Cell survival experiments were performed by assessing metabolic activity of cells using MTS assay. The entrapment of gadolinium-based contrast agent gadobutrol inside the cells was evaluated using T1 relaxometry of cell suspensions 25 min and 24 h after electroporation and confirmed by inductively coupled plasma mass spectrometry.

RESULTS

Contrast agent was detected 25 min and 24 h after the delivery of electric pulses in cells that were reversibly electroporated. In addition, contrast agent was present in irreversibly electroporated cells 25 min after the delivery of electric pulses but was no longer detected in irreversibly electroporated cells after 24 h. Inductively coupled plasma mass spectrometry showed a proportional decrease in gadolinium content per cell with shortening of T1 relaxation time (R 2 = 0.88 and p = 0.0191).

CONCLUSIONS

Our results demonstrate that the contrast agent is entrapped in cells exposed to reversible electroporation but exits from cells exposed to irreversible electroporation within 24 h, thus confirming the hypothesis on which detection experiments in vivo were based.

Recent Advances in Biomaterials for mRNA Delivery to Immune Cells

Modulating the function of immune cells by targeting the cells themselves has become a key strategy in immunotherapy for combating various diseases such as cancer, autoimmune disorders, and infectious ailments. The use of mRNA (mRNA) is a powerful tool for transiently inducing protein expression, which is often used for genetic manipulation. However, its inherent instability and inability to precisely reach target cells necessitate the use of biomaterials for safe and effective delivery. Additionally, transfecting immune cells is difficult and complex due to their resistance mechanisms, signaling pathways, and cellular interactions. This review focuses on the recent development of biomaterials for mRNA delivery to immune cells, including lipid nanoparticles and polymeric carriers. It also outlines the challenges of targeting and delivering therapeutic payloads to immune cells, providing commentary and outlook on the design of next-generation materials. Finally, this approach has the potential to significantly enhance the precision and effectiveness of therapeutic interventions for various diseases, shaping the future of mRNA delivery for immune conditions.

Harnessing and Mimicking Bacterial Features to Combat Cancer: From Living Entities to Artificial Mimicking Systems

Bacterial-derived micro-/nanomedicine has garnered considerable attention in anticancer therapy, owing to the unique natural features of bacteria, including specific targeting ability, immunogenic benefits, physicochemical modifiability, and biotechnological editability. Besides, bacterial components have also been explored as promising drug delivery vehicles. Harnessing these bacterial features, cutting-edge physicochemical and biotechnologies have been applied to attenuated tumor-targeting bacteria with unique properties or functions for potent and effective cancer treatment, including strategies of gene-editing and genetic circuits. Further, the advent of bacteria-inspired micro-/nanorobots and mimicking artificial systems has furnished fresh perspectives for formulating strategies for developing highly efficient drug delivery systems. Focusing on the unique natural features and advantages of bacteria, this review delves into advances in bacteria-derived drug delivery systems for anticancer treatment in recent years, which has experienced a process from living entities to artificial mimicking systems. Meanwhile, a summary of relative clinical trials is provided and primary challenges impeding their clinical application are discussed. Furthermore, future directions are suggested for bacteria-derived systems to combat cancer.

Calculating transmembrane voltage on the electric pulse-affected cancerous cell membrane: using molecular dynamics and finite element simulations

CONTEXT

Electroporation is a technique that creates electrically generated pores in the cell membrane by modifying transmembrane potential. In this work, the finite element method (FEM) was used to examine the induced transmembrane voltage (ITV) of a spherical-shaped MCF-7 cell, allowing researchers to determine the stationary ITV. A greater ITV than the critical value causes permeabilization of the membrane. Furthermore, the present study shows how a specific surface conductivity can act as a stand-in for the thin layer that constitutes a cell membrane as the barrier between extracellular and intracellular environments. Additionally, the distribution of ITV on the cell membrane and its maximum value were experimentally evaluated for a range of applied electric fields. Consequently, the entire cell surface area was electroporated 66% and 68% for molecular dynamics (MD) simulations and FEM, respectively, when the external electric field of 1500 V/cm was applied to the cell suspension using the previously indicated numerical methods. Furthermore, the lipid bilayers' molecular structure was changed, which led to the development of hydrophilic holes with a radius of 1.33 nm. Applying MD and FEM yielded threshold values for transmembrane voltage of 700 and 739 mV, respectively.

METHOD

Using MD simulations of palmitoyloleoyl-phosphatidylcholine (POPC), pores in cell membranes exposed to external electric fields were numerically investigated. The dependence on the electric field was estimated and developed, and the amount of the electroporated cell surface area matches the applied external electric field. To investigate more, a mathematical model based on an adaptive neuro-fuzzy inference system (ANFIS) is employed to predict the percent cell viability of cancerous cells after applying four pulses during electroporation. For MD simulations, ArgusLab, VMD, and GROMACS software packages were used. Moreover, for FEM analysis, COMSOL software package was used. Also, it is worth mentioning that for mathematical model, MATLAB software is used.

Advanced micro/nano-electroporation for gene therapy: recent advances and future outlook

Gene therapy is a promising disease treatment approach by editing target genes, and thus plays a fundamental role in precision medicine. To ensure gene therapy efficacy, the effective delivery of therapeutic genes into specific cells is a key challenge. Electroporation utilizes short electric pulses to physically break the cell membrane barrier, allowing gene transfer into the cells. It dodges the off-target risks associated with viral vectors, and also stands out from other physical-based gene delivery methods with its high-throughput and cargo-accelerating features. In recent years, with the help of advanced micro/nanotechnology, micro/nanostructure-integrated electroporation (micro/nano-electroporation) techniques and devices have significantly improved cell viability, transfection efficiency and dose controllability of the electroporation strategy, enhancing its application practicality especially in vivo. This technical advancement makes micro/nano-electroporation an effective and versatile tool for gene therapy. In this review, we first introduce the evolution of electroporation technique with a brief explanation of the perforation mechanism, and then provide an overview of the recent advancements and prospects of micro/nano-electroporation technology in the field of gene therapy. To comprehensively showcase the latest developments of micro/nano-electroporation technology in gene therapy, we focus on discussing micro/nano-electroporation devices and current applications at both in vitro and in vivo levels. Additionally, we outline the ongoing clinical studies of gene electrotransfer (GET), revealing the tremendous potential of electroporation-based gene delivery in disease treatment and healthcare. Lastly, the challenges and future directions in this field are discussed.

State-of-the-art pulsed field ablation for cardiac arrhythmias: ongoing evolution and future perspective

Pulsed field ablation (PFA) is an innovative approach in the field of cardiac electrophysiology aimed at treating cardiac arrhythmias. Unlike traditional catheter ablation energies, which use radiofrequency or cryothermal energy to create lesions in the heart, PFA utilizes pulsed electric fields to induce irreversible electroporation, leading to targeted tissue destruction. This state-of-the-art review summarizes biophysical principles and clinical applications of PFA, highlighting its potential advantages over conventional ablation methods. Clinical data of contemporary PFA devices are discussed, which combine predictable procedural outcomes and a reduced risk of thermal collateral damage. Overall, these technological developments have propelled the rapid evolution of contemporary PFA catheters, with future advancements potentially impacting patient care.

CAR-T cell therapy: a game-changer in cancer treatment and beyond

In recent years, cancer has become one of the primary causes of mortality, approximately 10 million deaths worldwide each year. The most advanced, chimeric antigen receptor (CAR) T cell immunotherapy has turned out as a promising treatment for cancer. CAR-T cell therapy involves the genetic modification of T cells obtained from the patient's blood, and infusion back to the patients. CAR-T cell immunotherapy has led to a significant improvement in the remission rates of hematological cancers. CAR-T cell therapy presently limited to hematological cancers, there are ongoing efforts to develop additional CAR constructs such as bispecific CAR, tandem CAR, inhibitory CAR, combined antigens, CRISPR gene-editing, and nanoparticle delivery. With these advancements, CAR-T cell therapy holds promise concerning potential to improve upon traditional cancer treatments such as chemotherapy and radiation while reducing associated toxicities. This review covers recent advances and advantages of CAR-T cell immunotherapy.

Biological autoluminescence enables effective monitoring of yeast cell electroporation

The application of pulsed electric fields (PEFs) is becoming a promising tool for application in biotechnology, and the food industry. However, real-time monitoring of the efficiency of PEF treatment conditions is challenging, especially at the industrial scale and in continuous production conditions.  To overcome this challenge, we have developed a straightforward setup capable of real-time detection of yeast biological autoluminescence (BAL) during pulsing. Saccharomyces cerevisiae culture was exposed to 8 pulses of 100 µs width with electric field strength magnitude 2-7 kV cm-1. To assess the sensitivity of our method in detecting yeast electroporation, we conducted a comparison with established methods including impedance measurements, propidium iodide uptake, cell growth assay, and fluorescence microscopy. Our results demonstrate that yeast electroporation can be instantaneously monitored during pulsing, making it highly suitable for industrial applications. Furthermore, the simplicity of our setup facilitates its integration into continuous liquid flow systems. Additionally, we have established quantitative indicators based on a thorough statistical analysis of the data that can be implemented through a dedicated machine interface, providing efficiency indicators for analysis.

Sucrose Treatment Enhances the Electrotransfer of DNA by Activating Phospholipase A2

Our previous study discovered that sucrose and other non-reducing sugars (e.g., trehalose and raffinose) could be used to improve the electrotransfer (ET) of molecular cargo, including DNA, mRNA, and ribonucleoprotein in various cell lines and primary human cells in vitro and in vivo. To understand the molecular mechanisms of this improvement, we used RNA sequencing technology to analyze changes in the cell transcriptome after sucrose treatment. The results from our analysis demonstrated that the sucrose treatment upregulated phospholipase A2 and V-ATPase gene families, which could potentially influence the acidity of intracellular vesicles through augmenting vesicle fusion and the influx of proton, respectively. To determine how this upregulation affects ET efficiency, we treated cells with pharmaceutical inhibitors of phospholipase A2 and V-ATPase. The data demonstrated that the treatment with the phospholipase A2 inhibitor could reverse the ET improvement elicited by the sucrose treatment. The V-ATPase inhibitor treatment either had little influence or further enhanced the effect of the sucrose treatment on the ET efficiency. These observations provide a molecular explanation for our previous findings, demonstrating that the sucrose treatment primarily enhanced the ET efficiency by promoting vesicle trafficking and fusion through the activation of phospholipase A2.

Antibiotic's target site affects the potentiation of Lactiplantibacillus plantarum inhibition and inactivation by electroporation

Introduction

Antibiotic resistance represents a growing global threat, and thus the motivation to develop novel and combined methods of bacterial inactivation is increasing. Electroporation is a technique in which electric pulses of sufficient strength are applied to permeabilize cells, including bacteria. Combining antibacterials with electroporation is a promising strategy to potentiate their bactericidal and bacteriostatic effectiveness. This approach has already proved useful for increasing bacterial inactivation, yet most studies so far have mainly focused on the maximal achievable effects, and less on the underlying mechanisms. We recently demonstrated that in the Gram-negative (G-) bacterium Escherichia coli, electroporation potentiates antibacterials targeting the peptidoglycan wall more than those with intracellular targets. However, in Gram-positive (G+) bacteria, the wall is directly accessible from the outside, and thus the dependence of potentiation on the antibacterial's target may be rather different. Here, we compare the inactivation and growth inhibition of the G+ bacterium Lactiplantibacillus plantarum for two antibiotics with different modes of action: ampicillin (inhibits cell-wall synthesis) and tetracycline (inhibits intracellular protein synthesis).

Methods

We used antibiotic concentrations ranging from 0 to 30 × MIC (minimum inhibitory concentration that we predetermined for each antibiotic), a single 1-ms electric pulse with an amplitude from 0 to 20 kV/cm, and post-pulse pre-dilution incubation of 24 h or 1 h.

Results

Electroporation increased the inhibition and inactivation efficiency of both antibiotics, but this was more pronounced for tetracycline, with statistical significance mostly limited to 24-h incubation. In general, both inhibition and inactivation grew stronger with increasing antibiotic concentration and electric field amplitude.

Discussion

Our results indicate that electroporation potentiates inactivation of G+ bacteria to a larger extent for antibiotics that inhibit intracellular processes and require transport into the cytoplasm, and to a smaller extent for antibiotics that inhibit cell-wall synthesis. This is the inverse of the relation observed in G- bacteria, and can be explained by the difference in the envelope structure: in G- bacteria the outer membrane must be breached for wall-inhibiting antibiotics to access their target, whereas in G+ bacteria the wall is inherently accessible from the outside and permeabilization does not affect this access.

Liquid Metal-Polymer Conductor-Based Conformal Cyborg Devices

Gallium-based liquid metal (LM) exhibits exceptional properties such as high conductivity and biocompatibility, rendering it highly valuable for the development of conformal bioelectronics. When combined with polymers, liquid metal-polymer conductors (MPC) offer a versatile platform for fabricating conformal cyborg devices, enabling functions such as sensing, restoration, and augmentation within the human body. This review focuses on the synthesis, fabrication, and application of MPC-based cyborg devices. The synthesis of functional materials based on LM and the fabrication techniques for MPC-based devices are elucidated. The review provides a comprehensive overview of MPC-based cyborg devices, encompassing their applications in sensing diverse signals, therapeutic interventions, and augmentation. The objective of this review is to serve as a valuable resource that bridges the gap between the fabrication of MPC-based conformal devices and their potential biomedical applications.

Optimization of plasmid electrotransformation into Bacillus subtilis using an antibacterial peptide

Bacillus subtilis can potentially serve as an efficient expression host for biotechnology due to its ability to secrete extracellular proteins and enzymes directly into the culture medium. One of the important challenges in the biotechnology industry is to optimize the transformation conditions of B. subtilis bacteria. This study aims to provide a new method to optimize the transformation conditions and improve the transformation efficiency of B. subtilis WB600. To increase the transformation efficiency in B. subtilis, two methods of adding CM11 antibacterial peptides to the bacterial medium along with electroporation and optimizing the variables including the growth medium composition, time to adding CM11 peptide, electroporation voltage, recovery medium, and cell recovery time are used. The results of this study showed that the addition of antimicrobial peptides (AMPs) with a concentration of 2 μg/ml increases the transformation efficiency by 4 times compared to the absence of AMP in the bacterial medium. Additionally, the findings from our study indicated that the most optimal rate of transformation for B. subtilis was observed at a voltage of 7.5 kV/cm, with a recovery period of 12 h. With the optimized method, the transformation efficiency came up to 1.69 × 104 CFU/µg DNA. This improvement in transformation efficiency will be attributed to the research of expression of exogenous genes in B. subtilis, gene library construction for transformation of wild-type B. subtilis strains.

Advances on electrochemical disinfection research: Mechanisms, influencing factors and applications

Disinfection, a vital barrier against pathogenic microorganisms, is crucial in halting the spread of waterborne diseases. Electrochemical methods have been extensively researched and implemented for the inactivation of pathogenic microorganisms from water and wastewater, primarily owing to their simplicity, efficiency, and eco-friendliness. This review succinctly outlined the core mechanisms of electrochemical disinfection (ED) and systematically examined the factors influencing its efficacy, including anode materials, system conditions, and target species. Additionally, the practical application of ED in water and wastewater treatment was comprehensively reviewed. Case studies involving various scenarios such as drinking water, hospital wastewater, black water, rainwater, and ballast water provided concrete instances of the expansive utility of ED. Finally, coupling ED with other technologies and the resulting synergies were introduced as pivotal foundations for subsequent engineering advancements.

Operando investigation of the synergistic effect of electric field treatment and copper for bacteria inactivation

As the overuse of chemicals in our disinfection processes becomes an ever-growing concern, alternative approaches to reduce and replace the usage of chemicals is warranted. Electric field treatment has shown promising potential to have synergistic effects with standard chemical-based methods as they both target the cell membrane specifically. In this study, we use a lab-on-a-chip device to understand, observe, and quantify the synergistic effect between electric field treatment and copper inactivation. Observations in situ, and at a single cell level, ensure us that the combined approach has an enhancement effect leading more bacteria to be weakened by electric field treatment and susceptible to inactivation by copper ion permeation. The synergistic effects of electric field treatment and copper can be visually concluded here, enabling the further study of this technology to optimally develop, mature, and scale for its various applications in the future.

Molecular dynamics simulation dataset of a kinesin on tubulin heterodimers in electric field

We present trajectories from non-equilibrium (in electric field) molecular dynamics (MD) simulations of a kinesin motor domain on tubulin heterodimers with two tubulin heterodimers forming neighbouring microtubule protofilaments. The trajectories are for no field (long equilibrium simulation), for four different electric field orientations (X, -X, Y, -Y) and for the X electric field at four different field strengths. We also provide a trajectory for larger simulation box. Our data enable to analyze the electric field effects on kinesin, which ultimately leads to kinesin detachment. This data set was used to understand the effect of electric field orientation and field strength on the kinetics and energetics of the electro-detachment of kinesin [1].

Genetic Transformation of Plasmid DNA into Escherichia coli Using High Frequency Electromagnetic Energy

We present a novel technique of genetic transformation of bacterial cells mediated by high frequency electromagnetic energy (HF EME). Plasmid DNA, pGLO (5.4 kb), was successfully transformed into Escherichia coli JM109 cells after exposure to 18 GHz irradiation at a power density between 5.6 and 30 kW m-2 for 180 s at temperatures ranging from 30 to 40 °C. Transformed bacteria were identified by the expression of green fluorescent protein (GFP) using confocal scanning microscopy (CLSM) and flow cytometry (FC). Approximately 90.7% of HF EME treated viable E. coli cells exhibited uptake of the pGLO plasmid. The interaction of plasmid DNA with bacteria leading to transformation was confirmed by using cryogenic transmission electron microscopy (cryo-TEM). HF EME-induced plasmid DNA transformation was shown to be unique, highly efficient, and cost-effective. HF EME-induced genetic transformation is performed under physiologically friendly conditions in contrast to existing techniques that generate higher temperatures, leading to altered cellular integrity. This technique allows safe delivery of genetic material into bacterial cells, thus providing excellent prospects for applications in microbiome therapeutics and synthetic biology.

Inactivation of antibiotic-resistant bacteria Escherichia coli by electroporation

Introduction

In modern times, bacterial infections have become a growing problem in the medical community due to the emergence of antibiotic-resistant bacteria. In fact, the overuse and improper disposal of antibiotics have led to bacterial resistance and the presence of such bacteria in wastewater. Therefore, it is critical to develop effective strategies for dealing with antibiotic-resistant bacteria in wastewater. Electroporation has been found to be one of the most promising complementary techniques for bacterial inactivation because it is effective against a wide range of bacteria, is non-chemical and is highly optimizable. Many studies have demonstrated electroporation-assisted inactivation of bacteria, but rarely have clinical antibiotics or bacteria resistant to these antibiotics been used in the study. Therefore, the motivation for our study was to use a treatment regimen that combines antibiotics and electroporation to inactivate antibiotic-resistant bacteria.

Methods

We separately combined two antibiotics (tetracycline and chloramphenicol) to which the bacteria are resistant (with a different resistance mode) and electric pulses. We used three different concentrations of antibiotics (40, 80 and 150 µg/ml for tetracycline and 100, 500 and 2000 µg/ml for chloramphenicol, respectively) and four different electric field strengths (5, 10, 15 and 20 kV/cm) for electroporation.

Results and discussion

Our results show that electroporation effectively enhances the effect of antibiotics and inactivates antibiotic-resistant bacteria. The inactivation rate for tetracycline or chloramphenicol was found to be different and to increase with the strength of the pulsed electric field and/or the concentration of the antibiotic. In addition, we show that electroporation has a longer lasting effect (up to 24 hours), making bacteria vulnerable for a considerable time. The present work provides new insights into the use of electroporation to inactivate antibiotic-resistant bacteria in the aquatic environment.

Nanosecond pulsed electric fields increase antibiotic susceptibility in methicillin-resistant Staphylococcus aureus

IMPORTANCE

We have found that treatment with short electric pulses potentiates the effects of multiple antibiotics against methicillin-resistant Staphylococcus aureus. By reducing the dose of antibiotic necessary to be effective, co-treatment with electric pulses could amplify the effects of standard antibiotic dosing to treat S. aureus infections such as skin and soft-tissue infections (SSTIs). SSTIs are accessible to physical intervention and are good candidates for electric pulse co-treatment, which could be adopted as a step-in wound and abscess debridement.

Genetically engineered HEK cells as a valuable tool for studying electroporation in excitable cells

Electric pulses used in electroporation-based treatments have been shown to affect the excitability of muscle and neuronal cells. However, understanding the interplay between electroporation and electrophysiological response of excitable cells is complex, since both ion channel gating and electroporation depend on dynamic changes in the transmembrane voltage (TMV). In this study, a genetically engineered human embryonic kidney cells expressing NaV1.5 and Kir2.1, a minimal complementary channels required for excitability (named S-HEK), was characterized as a simple cell model used for studying the effects of electroporation in excitable cells. S-HEK cells and their non-excitable counterparts (NS-HEK) were exposed to 100 µs pulses of increasing electric field strength. Changes in TMV, plasma membrane permeability, and intracellular Ca2+ were monitored with fluorescence microscopy. We found that a very mild electroporation, undetectable with the classical propidium assay but associated with a transient increase in intracellular Ca2+, can already have a profound effect on excitability close to the electrostimulation threshold, as corroborated by multiscale computational modelling. These results are of great relevance for understanding the effects of pulse delivery on cell excitability observed in context of the rapidly developing cardiac pulsed field ablation as well as other electroporation-based treatments in excitable tissues.

Efficient polyhydroxybutyrate production using acetate by engineered Halomonas sp. JJY01 harboring acetyl-CoA acetyltransferase

Polyhydroxybutyrate (PHB) is a well-known biodegradable bioplastic synthesized by microorganisms and can be produced from volatile fatty acids (VFAs). Among VFAs acetate can be utilized by Halomonas sp. YLGW01 for growth and PHB production. In this study, Halomonas sp. JJY01 was developed through introducing acetyl-CoA acetyltransferase (atoAD) with LacIq-Ptrc promoter into Halomonas sp. YLGW01. The effect of expression of atoAD on acetate was investigated by comparison with acetate consumption and PHB production. Shake-flask study showed that Halomonas sp. JJY01 increased acetate consumption rate, PHB yield and PHB production (0.27 g/L/h, 0.075 g/g, 0.72 g/L) compared to the wild type strain (0.17 g/L/h, 0.016 g/g, 0.11 g/L). In 10 L fermenter scale fed-batch fermentation, the growth of Halomonas sp. JJY01 resulted in higher acetate consumption rate, PHB yield and PHB titer (0.55 g/L/h, 0.091 g/g, 4.6 g/L) than wild type strain (0.35 g/L/h, 0.067 h/h, 2.9 g/L). These findings demonstrate enhanced acetate utilization and PHB production through the introduction of atoAD in Halomonas strains.

Complex magnetic fields represent an eco-sustainable technology to counteract the resistant Candida albicans growth without affecting the human gingival fibroblasts

Novel technologies such as complex magnetic fields-CMFs represent an eco-sustainable proposal to counteract the infection associated to resistant microorganisms. The aim of this study was to evaluate the effect of two CMF programs (STRESS, ANTIBACTERIAL) against clinical antifungal resistant C. albicans also evaluating their uneffectiveness on gingival fibroblasts (hGFs). The STRESS program was more efficacious on C. albicans biofilm with up to 64.37% ± 10.80 of biomass and up to 99.19% ± 0.06 CFU/ml reductions in respect to the control also inducing an alteration of lipidic structure of the membrane. The MTT assay showed no CMFs negative effects on the viability of hGFs with a major ROS production with the ANTIBACTERIAL program at 3 and 24 h. For the wound healing assay, STRESS program showed the best effect in terms of the rate migration at 24 h, showing statistical significance of p < 0.0001. The toluidine-blue staining observations showed the typical morphology of cells and the presence of elongated and spindle-shaped with cytoplasmic extensions and lamellipodia was observed by SEM. The ANTIBACTERIAL program statistically increased the production of collagen with respect to control and STRESS program (p < 0.0001). CMFs showed a relevant anti-virulence action against C. albicans, no cytotoxicity effects and a high hGFs migration rate. The results of this study suggest that CMFs could represent a novel eco-sustainable strategy to counteract the resistant yeast biofilm infections.

Decoupling locally enhanced electric field treatment (LEEFT) intensity and copper release by applying asymmetric electric pulses for water disinfection

Copper has well-known anti-microbial properties but is typically not considered for drinking water disinfection because of its health risk to human at efficient biocidal concentrations. Locally enhanced electric field treatment (LEEFT) is a cutting-edge technique that aims to inactivate bacteria by generating aqueous pores on the cell membrane through the application of a strong electric field. LEEFT can also increase the permeability of the cell membrane, which promotes the uptake of chemical disinfectants to reduce the required biocidal concentrations. Previously, a coaxial-electrode copper ionization cell (CECIC) was developed to combine copper disinfection with LEEFT, demonstrating superior disinfection efficiency with low effluent copper concentrations (<0.5 mg/L). However, using direct-current (DC) voltages results in a dilemma that a higher voltage is necessary for effective LEEFT disinfection, but a lower voltage is required to limit Cu release. Here, asymmetric electric pulses are employed to decouple the LEEFT intensity from copper release in the CECIC. In this case, LEEFT intensity is primarily determined by the pulse amplitude while the copper release is controlled by the pulse offset. We have demonstrated that the use of asymmetric electric pulses achieves significantly higher inactivation efficiency compared to the DC voltages with the similar level of Cu release. For the water with conductivity similar to tap water (∼100 μS/cm), a high inactivation efficiency of 4.7-log is achieved with only 0.49 mg/L copper release. These findings highlight the potential of asymmetric electric pulses as a promising alternative to DC voltages for the practical application of LEEFT-Cu systems in the future.

Reduced Graphene Oxide-Coated Fabrics for Joule-Heating and Antibacterial Applications

Multifunctional textiles have emerged as a significant area of research due to their growing importance and diverse applications. The main requirement for these fabrics is electroconductivity, which is usually gained by incorporating conductive materials such as graphene into the textile structure. In this article, an electrochemical method was demonstrated to integrate different loadings of reduced graphene oxide (rGO) into fabrics for enhanced electrical conductivity. The process involves spray coating of graphene oxide (GO) onto the fabric, followed by in situ electrochemical reduction of GO, resulting in a coating layer of rGO nanosheets. The rGO-coated fabric exhibited exceptional Joule-heating capabilities, achieving 127 °C under a 9 V direct voltage with only 770 μg/cm2 of rGO loading. Moreover, the antibacterial properties of the rGO-coated fabric were demonstrated, showing a significant reduction rate of over 99.99% against both Bacillus subtilis and Escherichia coli. Joule-heating and antibacterial performances of the rGO-coated fabric were investigated over eight repeated cycles, demonstrating excellent repeatability. The simplicity of the fabrication method, along with the electrothermal and antibacterial effects of the rGO-coated fabric, makes it a promising material for various practical applications.

Magnetically-assisted viral transduction (magnetofection) medical applications: An update

Gene therapy involves replacing a faulty gene or adding a new gene inside the body's cells to cure disease or improve the body's ability to fight disease. Its popularity is evident from emerging concepts such as CRISPR-based genome editing and epigenetic studies and has been moved to a clinical setting. The strategy for therapeutic gene design includes; suppressing the expression of pathogenic genes, enhancing necessary protein production, and stimulating the immune system, which can be incorporated into both viral and non-viral gene vectors. Although non-viral gene delivery provides a safer platform, it suffers from an inefficient rate of gene transfection, which means a few genes could be successfully transfected and expressed within the cells. Incorporating nucleic acids into the viruses and using these viral vectors to infect cells increases gene transfection efficiency. Consequently, more cells will respond, more genes will be expressed, and sustained and successful gene therapy can be achieved. Combining nanoparticles (NPs) and nucleic acids protects genetic materials from enzymatic degradation. Furthermore, the vectors can be transferred faster, facilitating cell attachment and cellular uptake. Magnetically assisted viral transduction (magnetofection) enhances gene therapy efficiency by mixing magnetic nanoparticles (MNPs) with gene vectors and exerting a magnetic field to guide a significant number of vectors directly onto the cells. This research critically reviews the MNPs and the physiochemical properties needed to assemble an appropriate magnetic viral vector, discussing cellular hurdles and attitudes toward overcoming these barriers to reach clinical gene therapy perspectives. We focus on the studies conducted on the various applications of magnetic viral vectors in cancer therapies, regenerative medicine, tissue engineering, cell sorting, and virus isolation.

Electroacoustic tomography for real-time visualization of electrical field dynamics in deep tissue during electroporation

Despite the widespread applications of electroporation in biotechnology and medicine, monitoring the distribution of deep tissue electrical fields in real-time during treatment continues to pose a challenge. Current medical imaging modalities are unable to monitor electroporation during pulse delivery. Here we propose a method to use electroacoustic tomography (EAT) to prompt the emission of broadband ultrasound waves via electrical energy deposition. EAT boasts submillimeter resolution at depths reaching 7.5 centimeters and can deliver imaging speeds up to 100 frames per second when paired with an ultrasound array system. We’ve successfully detected EAT signals at electric field strengths ranging from 60 volts per centimeter to several tens of kilovolts per centimeter. This establishes EAT as a potential label-free, high-resolution approach for real-time evaluation of deep tissue electroporation during therapeutic procedures.

Electroporation stimulated by pulsed electrical fields can increase the permeability of cell membranes. However, real-time monitoring of electroporation during pulse delivery is challenging. Xu and colleagues use electroacoustic tomography to image electrical field deposition in deep tissue. This label-free method achieves submillimeter resolution at depths up to 7.5 centimetres.

Advances in Bioresorbable Triboelectric Nanogenerators

With the growing demand for next-generation health care, the integration of electronic components into implantable medical devices (IMDs) has become a vital factor in achieving sophisticated healthcare functionalities such as electrophysiological monitoring and electroceuticals worldwide. However, these devices confront technological challenges concerning a noninvasive power supply and biosafe device removal. Addressing these challenges is crucial to ensure continuous operation and patient comfort and minimize the physical and economic burden on the patient and the healthcare system. This Review highlights the promising capabilities of bioresorbable triboelectric nanogenerators (B-TENGs) as temporary self-clearing power sources and self-powered IMDs. First, we present an overview of and progress in bioresorbable triboelectric energy harvesting devices, focusing on their working principles, materials development, and biodegradation mechanisms. Next, we examine the current state of on-demand transient implants and their biomedical applications. Finally, we address the current challenges and future perspectives of B-TENGs, aimed at expanding their technological scope and developing innovative solutions. This Review discusses advancements in materials science, chemistry, and microfabrication that can advance the scope of energy solutions available for IMDs. These innovations can potentially change the current health paradigm, contribute to enhanced longevity, and reshape the healthcare landscape soon.

Nanoporous electroporation needle for localized intracellular delivery in deep tissues

The exogenous control of intracellular drug delivery has been shown to improve the overall efficacy of therapies by reducing nonspecific off-target toxicity. However, achieving a precise on-demand dosage of a drug in deep tissues with minimal damage is still a challenge. In this study, we report an electric-pulse-driven nanopore-electroporation (nEP) system for the localized intracellular delivery of a model agent in deep tissues. Compared with conventional bulk electroporation, in vitro nEP achieved better transfection efficiency (>60%) with a high cell recovery rate (>95%) under a nontoxic low electroporation condition (40 V). Furthermore, in vivo nEP using a nanopore needle electrode with a side drug-releasing compartment offered better control over the dosage release, time, and location of propidium iodide, which was used as a model agent for intracellular delivery. In a pilot study using experimental animals, the nEP system exhibited two times higher transfection efficiency of propidium iodide in the thigh muscle tissue, while minimizing tissue damage (<20%) compared to that of bulk electroporation. This tissue-penetrating nEP platform can provide localized, safe, and effective intracellular delivery of diverse therapeutics into deep tissues in a controlled manner.

Investigation of osmotic shock effect on pulsed electric field treated S. cerevisiae yeast cells

Pulsed electric field (PEF) treatment is known to cause plasma membrane permeabilization of microorganisms, an effect known as electroporation. PEF treatment is very attractive since it can achieve permeabilization with or without lethal damage in accordance with desired results. This study aimed to expand the accomplishment of electroporation outcomes by applying sudden post-PEF osmotic composition change of the media. Changes in yeast cells' viability, size and plasma membrane regeneration rate were evaluated. However, we still have questions about the intracellular biochemical processes responsible for plasma membrane recovery after electroporation. Our suggested candidate is the high osmolarity glycerol (HOG) kinase pathway. The HOG pathway in Saccharomyces cerevisiae yeasts is responsible for volume recovery after dangerous shape modifications and intracellular water disbalance caused by environmental osmotic pressure changes. Thus, we evaluated the HOG pathway inactivation effect on S. cerevisiae's reaction to PEF treatment. Results showed that Hog1 deficient S. cerevisiae cells were considerably more sensitive to electric field treatment, confirming a link between the HOG pathway and S. cerevisiae recovery process after electroporation. By suddenly changing the osmolarity of the media after PEF we influenced the cells' plasma membrane recovery rate, severity of permeabilization and survivability of yeast cells. Studies of electroporation in combination with various treatments might improve electric field application range, efficiency, and optimization of the process.

The role of lipid oxidation on electrical properties of planar lipid bilayers and its importance for understanding electroporation

Electroporation is a useful tool for the manipulation with the cell membrane permeability. Underlying physicochemical processes taking place at the molecular level during electroporation are relatively well studied. However, various processes remain unknown, one of them is lipid oxidation, a chain reaction that causes degradation of lipids, and might explain the long-lasting membrane permeability after the electric field has ceased. The aim of our study was to observe the differences in the electrical properties of planar lipid bilayers, as in vitro cell membrane models, due to lipid oxidation. Phospholipids were chemically oxidized and oxidation products were analysed using mass spectrometry. Electrical properties, resistance R (Ω) and capacitance C (F) were measured using an LCR meter. Using a previously developed measuring device, a linear increasing signal was applied to a stable bilayer in order to measure its breakdown voltage U_br (V) and lifetime t_br (µs). We observed an increase in conductance and capacitance of the oxidized planar lipid bilayers when compared to their non-oxidized counterparts. With increasing lipid oxidation, the core of the bilayer becomes more polar, and consequently more permeable. Our findings can explain the long-lasting permeability of the cell membrane after electroporation.

Technological Development and Application of Plant Genetic Transformation

Genetic transformation is an important strategy for enhancing plant biomass or resistance in response to adverse environments and population growth by imparting desirable genetic characteristics. Research on plant genetic transformation technology can promote the functional analysis of plant genes, the utilization of excellent traits, and precise breeding. Various technologies of genetic transformation have been continuously discovered and developed for convenient manipulation and high efficiency, mainly involving the delivery of exogenous genes and regeneration of transformed plants. Here, currently developed genetic transformation technologies were expounded and compared. Agrobacterium-mediated gene delivery methods are commonly used as direct genetic transformation, as well as external force-mediated ways such as particle bombardment, electroporation, silicon carbide whiskers, and pollen tubes as indirect ones. The regeneration of transformed plants usually involves the de novo organogenesis or somatic embryogenesis pathway of the explants. Ectopic expression of morphogenetic transcription factors (Bbm, Wus2, and GRF-GIF) can significantly improve plant regeneration efficiency and enable the transformation of some hard-to-transform plant genotypes. Meanwhile, some limitations in these gene transfer methods were compared including genotype dependence, low transformation efficiency, and plant tissue damage, and recently developed flexible approaches for plant genotype transformation are discussed regarding how gene delivery and regeneration strategies can be optimized to overcome species and genotype dependence. This review summarizes the principles of various techniques for plant genetic transformation and discusses their application scope and limiting factors, which can provide a reference for plant transgenic breeding.

Continuous microfluidic flow-through protocol for selective and image-activated electroporation of single cells

Electroporation of cells is a widely-used tool to transport molecules such as proteins or nucleic acids into cells or to extract cellular material. However, bulk methods for electroporation do not offer the possibility to selectively porate subpopulations or single cells in heterogeneous cell samples. To achieve this, either presorting or complex single-cell technologies are required currently. In this work, we present a microfluidic flow protocol for selective electroporation of predefined target cells identified in real-time by high-quality microscopic image analysis of fluorescence and transmitted light. While traveling through the microchannel, the cells are focused by dielectrophoretic forces into the microscopic detection area, where they are classified based on image analysis techniques. Finally, the cells are forwarded to a poration electrode and only the target cells are pulsed. By processing a heterogenically stained cell sample, we were able to selectively porate only target cells (green-fluorescent) while non-target cells (blue-fluorescent) remained unaffected. We achieved highly selective poration with >90% specificity at average poration rates of >50% and throughputs of up to 7200 cells per hour.

Portable Bulk-Water Disinfection by Live Capture of Bacteria with Divergently Branched Porous Graphite in Electric Fields

Easy access to clean water is essential to functioning and development of modern society. However, it remains arduous to develop energy-efficient, facile, and portable water treatment systems for point-of-use (POU) applications, which is particularly imperative for the safety and resilience of society during extreme weather and critical situations. Here, we propose and validate a meritorious working scheme for water disinfection via directly capturing and removing pathogen cells from bulk water using strategically designed three-dimensional (3D) porous dendritic graphite foams (PDGFs) in a high-frequency AC field. The prototype, integrated in a 3D-printed portable water-purification module, can reproducibly remove 99.997% E. coli bacteria in bulk water at a few voltages with among the lowest energy consumption at 435.5 J·L^-1_. The PDGFs, costing $1.47 per piece, can robustly operate at least 20 times for more than 8 h in total without functional degradation. Furthermore, we successfully unravel the involved disinfection mechanism with one-dimensional Brownian dynamics simulation. The system is practically applied that brings natural water in Waller Creek at UT Austin to the safe drinking level. This research, including the working mechanism based on dendritically porous graphite and the design scheme, could inspire a future device paradigm for POU water treatment.

Polymerization-Induced Self-Assembly: An Emerging Tool for Generating Polymer-Based Biohybrid Nanostructures

The combination of biomolecules and synthetic polymers provides an easy access to utilize advantages from both the synthetic world and nature. This is not only important for the development of novel innovative materials, but also promotes the application of biomolecules in various fields including medicine, catalysis, and water treatment, etc. Due to the rapid progress in synthesis strategies for polymer nanomaterials and deepened understanding of biomolecules' structures and functions, the construction of advanced polymer-based biohybrid nanostructures (PBBNs) becomes prospective and attainable. Polymerization-induced self-assembly (PISA), as an efficient and versatile technique in obtaining polymeric nano-objects at high concentrations, has demonstrated to be an attractive alternative to existing self-assembly procedures. Those advantages induce the focus on the fabrication of PBBNs via the PISA technique. In this review, current preparation strategies are illustrated based on the PISA technique for achieving various PBBNs, including grafting-from and grafting-through methods, as well as encapsulation of biomolecules during and subsequent to the PISA process. Finally, advantages and drawbacks are discussed in the fabrication of PBBNs via the PISA technique and obstacles are identified that need to be overcome to enable commercial application.

Rapid and precise tracking of water influx and efflux across cell membranes induced by a pulsed electric field

Quantitative measurements of water content within a single cell are notoriously difficult. In this work, we introduce a single-shot optical method for tracking the intracellular water content, by mass and volume, of a single cell at video rate. We utilize quantitative phase imaging and a priori knowledge of a spherical cellular geometry, leveraging a two-component mixture model to compute the intracellular water content. We apply this technique to study CHO-K1 cells responding to a pulsed electric field, which induces membrane permeabilization and rapid water influx or efflux depending upon the osmotic environment. The effects of mercury and gadolinium on water uptake in Jurkat cells following electropermeabilization are also examined.

Self-Powered Disinfection Using Triboelectric, Conductive Wires of Metal-Organic Frameworks

Efficient water disinfection is vitally needed in rural and disaster-stricken areas lacking power supplies. However, conventional water disinfection methods strongly rely on external chemical input and reliable electricity. Herein, we present a self-powered water disinfection system using synergistic hydrogen peroxide (H₂O₂) assisted electroporation mechanisms driven by triboelectric nanogenerators (TENGs) that harvest electricity from the flow of water. The flow-driven TENG, assisted by power management systems, generates a controlled output with aimed voltages to drive a conductive metal-organic framework nanowire array for effective H₂O₂ generation and electroporation. The injured bacteria caused by electroporation can be further damaged by facile diffused H₂O₂ molecules at high throughput. A self-powered disinfection prototype enables complete disinfection (>99.9999% removal) over a wide range of flows up to 3.0 × 10⁴ L/(m² h) with low water flow thresholds (200 mL/min; ∼20 rpm). This rapid, self-powered water disinfection method is promising for pathogen control.

Application of electric field treatment (EFT) for microbial control in water and liquid food

Water disinfection and food pasteurization are critical to reducing waterborne and foodborne diseases, which have been a pressing public health issue globally. Electrified treatment processes are emerging and have become promising alternatives due to the low cost of electricity, independence of chemicals, and low potential to form by-products. Electric field treatment (EFT) is a physical pathogen inactivation approach, which damages cell membrane by irreversible electroporation. EFT has been studied for both water disinfection and food pasteurization. However, no study has systematically connected the two fields with an up-to-date review. In this article, we first provide a comprehensive background of microbial control in water and food, followed by the introduction of EFT. Subsequently, we summarize the recent EFT studies for pathogen inactivation from three aspects, the processing parameters, its efficacy against different pathogens, and the impact of liquid properties on the inactivation performance. We also review the development of novel configurations and materials for EFT devices to address the current challenges of EFT. This review introduces EFT from an engineering perspective and may serve as a bridge to connect the field of environmental engineering and food science.