Thermal treatments and emerging technologies: Impacts on the structure and techno-functional properties of milk proteins

Identification and Validation of Key Amino Acids in IgE Linear Epitopes of β-Lactoglobulin: Comparison of Recognition Patterns of Chinese Bovine Milk-Allergic Sera with Different Symptoms

β-lactoglobulin (BLG) is the primary allergen in bovine milk allergy. The identification of key amino acids in the BLG epitopes has not been comprehensive due to differences in identification methods, patient symptoms, and population characteristics. In this study, bioinformatics predictions were conducted for key amino acids based on two potential IgE linear epitopes in BLG. Then, the peptide AA30-43 was confirmed as an IgE linear epitope through alanine scanning mutagenesis and peptide microarray assays, with four key amino acids (A34, A37, R40, and V41) common to different symptoms being identified. Moreover, symptom-specific key amino acids were identified. Serine (S30) and aspartic acid (D33) are the key amino acids for cutaneous allergy, while food allergy sera showed a preference for recognizing leucines in different positions (L31 and L39). Additionally, mutant peptides (R40, V41, L39, and D33) showed an obvious decrease in digestive stability compared with the epitope. Finally, the results of the KU812 cell degranulation model validated the critical role of the amino acids in allergenicity. These findings offer significant advantages for advancing both immune tolerance therapies and hypoallergenic milk product development, which hold significant implications for further research, prevention, and treatment of bovine milk allergy.

Microbiological Analysis Conducted on Raw Milk Collected During Official Sampling in Liguria (North-West Italy) over a Ten-Year Period (2014-2023)

Milk has been consumed by humans for thousands of years for its nutritional properties. In recent years, raw milk demand has increased, valued for its authenticity and connection to local traditions. In Italy, the sale of raw milk is allowed exclusively through direct sale from the producing farm to the final consumer, either at the producing farm itself or through vending machines. However, the consumption of raw milk is not without risks. Among these, microbiological ones are relevant. These can lead to severe symptoms, particularly in vulnerable populations. For this reason, although consumers are advised to boil raw milk before consumption, producing farms in Italy are required to meet the microbiological criteria outlined in the Provision of 25 January 2007. In this retrospective study, the results of the analyses performed on 355 raw milk samples collected in Liguria between 2014 and 2023 for the detection of Campylobacter spp., Salmonella spp., Listeria monocytogenes, Staphylococcus aureus, and Escherichia coli O157 were analysed to better characterise the associated risk for consumers. The samples were collected during official controls by the local veterinary health services at vending machines of seven producing farms. Overall, six samples tested positive for C. jejuni, while only one sample tested positive for Salmonella enterica subsp. enterica, Serovar Veneziana. Listeria monocytogenes, S. aureus, and E. coli O157 were never responsible for non-compliances. Interestingly, three of the six samples positive for C. jejuni derived from the same producer. In farms where positive samples were detected, certain structural and/or operational non-compliances were identified. It can be concluded that, although the scenario in question does not present any cause for concern, it is nevertheless essential to implement a series of preventive measures in order to guarantee the safety of raw milk. These measures include the implementation of biosecurity practices, the maintenance of strict hygiene protocols during milking, and the adherence to the cold chain distribution protocol until the final stage of distribution.

Whipped chickpea aquafaba as a fat replacer in ice cream: Effect on sensory and physicochemical properties

Whipped chickpea aquafaba (WAF) exhibits foaming, emulsifying, and gelling properties, making it a potential ingredient for replacing cream in ice cream formulations. The aim of this study was to use WAF in combination with whey protein isolate (WPI) to produce low-fat coffee ice cream with 50% (L50) and 80% (L80) milk cream replacement. The melting rate, color, texture, volatile compounds, and sensory attributes were analyzed to explore the physical, chemical, and sensory properties of the low-fat ice creams compared to their full-fat counterparts. Fat substitute performance varied based on cream replacement levels, with L50 1:0 (WAF:WPI) and L80 1:0 achieving 25% and 40% reductions in calorie content, respectively. The foaming properties of aquafaba resulted in an increased overrun, particularly in formulations where the cream reduction was 50%. While the 80% replacement showed higher intensity of "hardness," "brown color," and "melting" sensory descriptors, the 50% cream-replaced ice cream showed only slight differences compared to the full-fat version, like a higher perception of ice crystals. The combination of WAF and WPI in ice cream provides sensory properties and releases pyrazines, responsible for the coffee aroma, similar to full-fat ice cream. The 1:1 WAF:WPI mixture for 50% cream reduction provided a suitable cream replacement, as this formulation resulted in ice cream that was not identified as different from the full-fat control ice cream in the triangle test. PRACTICAL APPLICATION: This study demonstrates that whipped aquafaba, a by-product of chickpea processing, can be effectively used to reduce the fat content in ice cream without compromising sensory quality. In addition to promoting the development of healthier low-fat ice creams, this approach also contributes to food industry sustainability by reusing a commonly discarded by-product.

Mechanisms underlying the changes in the structural, physicochemical, and emulsification properties of porcine myofibrillar proteins induced by prolonged pulsed electric field treatment

This study aimed to explore how pulsed electric field (PEF) treatment affects the structural, physicochemical, and emulsification properties of porcine-derived myofibrillar proteins (MPs). Increasing PEF treatment induced partial polarization and protein unfolding, resulting in notable denaturation that affected both the secondary and tertiary structures. PEF treatment also improved the solubility and emulsification ability of MPs by reducing their pH and surface hydrophobicity. Confocal laser scanning microscopy confirmed the effective adsorption of MPs and PEF-treated MPs at the oil/water interface, resulting in well-fabricated Pickering emulsions. A weak particle network increased the apparent viscosity in short-term PEF-treated Pickering emulsions. Conversely, in emulsions with long-term PEF-treated MP, rheological variables decreased, and dispersion stability increased. These results endorse the potential application of PEF-treated porcine-derived MPs as efficient Pickering stabilizers, offering valuable insights into the creative use of PEF for enhancing high-quality meat products, meeting the increasing demand for clean-label choices.

Lactoferrin-Based Heteroprotein Systems, From Their Formation Mechanism, Properties, To Applications

Lactoferrin (LF) is an important iron-binding glycoprotein found in milk and mucosal secretions. The alkaline lactoferrin can interact with some acidic proteins to form heteroprotein systems with multifunctional properties and a wide range of applications. Lactoferrin can interact with animal and plant proteins mainly through the electrostatic forces, dipolar attraction, and hydrophobic interactions. In this review, the types of heteroprotein complexes formed by the complex coacervation of lactoferrin with other proteins are introduced, including the preparation, structure, and applications. The factors affecting the formation of heteroprotein complexes are described, such as pH, ionic strength, mixing ratio, total protein concentration, and temperature. The issues and challenges in the formation of heteroprotein complexes are also discussed.

Innovative applications of whey protein for sustainable dairy industry: Environmental and technological perspectives-A comprehensive review

Industrial waste management is critical to maintaining environmental sustainability. The dairy industry (DI), as one of the major consumers of freshwater, generates substantial whey dairy effluent, which is notably rich in organic matter and thus a significant pollutant. The effluent represents environmental risks due to its high biological and chemical oxygen demands. Today, stringent government regulations, environmental laws, and heightened consumer health awareness are compelling industries to responsibly manage and reuse whey waste. Therefore, this study investigates sustainable solutions for efficiently utilizing DI waste. Employing a systematic review approach, the research reveals that innovative technologies enable the creation of renewable, high-quality, value-added food products from dairy byproducts. These innovations offer promising sustainable waste management strategies for the dairy sector, aligning with economic interests. The main objectives of the study deal with, (a) assessing the environmental impact of dairy sector waste, (b) exploring the multifaceted nutritional and health benefits inherent in cheese whey, and (c) investigating diverse biotechnological approaches to fashion value-added, eco-friendly dairy whey-based products for potential integration into various food products, and thus fostering economic sustainability. Finally, the implications of this work span theoretical considerations, practical applications, and outline future research pathways crucial for advancing the sustainable management of dairy waste.

Effect of high hydrostatic pressure treatment on the antioxidant activity of lactoferrin before and after gastrointestinal digestion

In this study, high hydrostatic pressure treatment of lactoferrin was used to investigate its effect on the hydrolysis and antioxidant activity of lactoferrin. The results showed that high hydrostatic pressure treatment at 600 MPa increased the exposure level of tryptophan residues of lactoferrin by 82.29%, which significantly altered the tertiary structure of lactoferrin, and this change was observed in scanning electron microscopy as an increase in the contact area of lactoferrin that could be contacted by proteases. Pressure treatments of 400 MPa and above increased the hydrolysis of lactoferrin for gastrointestinal digestion by 21.19%, which increased the release of antioxidant-related amino acids and increased the free radical scavenging capacity of lactoferrin intestinal digestive fluid by 35.12%. Meanwhile, two lactoferrin antioxidant peptides, QAYPNLCQLCK and NCPDKFCLFK, were identified in the lactoferrin intestine digest. These findings indicate that high hydrostatic pressure treatment could be a potentially beneficial method for processing lactoferrin.

Effect of Protein Content on Heat Stability of Reconstituted Milk Protein Concentrate under Controlled Shearing

Milk protein concentrates (MPCs) possess significant potential for diverse applications in the food industry. However, their heat stability may be a limitation to achieving optimal functional performance. Shearing, an inherent process in food manufacturing, can also influence the functionality of proteins. The aim of this research was to examine the heat stability of reconstituted MPCs prepared at two protein concentrations (4% and 8% w/w protein) when subjected to varying levels of shearing (100, 1000, or 1500 s-1) during heating at 90 °C for 5 min or 121 °C for 2.6 min. While the impact of shear was relatively minor at 4% protein, it was more pronounced in 8% protein MPC suspensions, leading to a considerable decline in heat stability. An increase in protein concentration to 8% amplified protein interactions, intensified by shearing. This, in turn, resulted in comparatively higher aggregation at elevated temperatures and subsequently reduced the heat stability of the reconstituted MPCs.

Effects of Different Heat Treatments on Yak Milk Proteins on Intestinal Microbiota and Metabolism

Dairy products are susceptible to modifications in protein oxidation during heat processing, which can lead to changes in protein function, subsequently affecting intestinal health. Despite being a unique nutritional source, yak milk has not been thoroughly examined for the effects of its oxidized proteins on intestinal microbiota and metabolism. Hence, this study employed different heat treatment methods (low-temperature pasteurization, high-temperature pasteurization, and high-temperature sterilization) to induce oxidation in yak milk proteins. The study then assessed the degree of oxidation in these proteins and utilized mice as research subjects. Using metagenomics and metabolomics methods, this study examined the structure of intestinal microbial communities and metabolic products in mice consuming oxidized yak milk. The results showed a decrease in carbonyl and total thiol contents of yak milk proteins after different heat treatments, indicating that heat treatment causes oxidation in yak milk proteins. Metagenomic analysis of mouse intestinal microbiota revealed significant changes in 66 genera. In the high-temperature sterilization group (H), key differential genera included Verrucomicrobiales, Verrucomicrobiae, Akkermansiaceae, and 28 others. The high-temperature pasteurization group (M) mainly consisted of Latilactobacillus, Bacillus, and Romboutsia. The low-temperature pasteurization group (L) primarily comprised of Faecalibacterium, Chaetomium, Paenibacillaceae, Eggerthella, Sordariales, and 33 others. Functionally, compared to the control group (C), the H group upregulated translation and energy metabolism functions, the L group the M group significantly upregulated metabolism of other amino acids, translation, and cell replication and repair functions. Based on metabolomic analysis, differential changes in mouse metabolites could affect multiple metabolic pathways in the body. The most significantly affected metabolic pathways were phenylalanine metabolism, vitamin B6 metabolism, steroid hormone biosynthesis, and pantothenate and CoA biosynthesis. The changes were similar to the functional pathway analysis of mouse metagenomics, affecting amino acid and energy metabolism in mice. In summary, moderate oxidation of yak milk proteins exhibits a positive effect on mouse intestinal microbiota and metabolism. In conclusion, yak milk has a positive effect on mouse intestinal microflora and metabolism, and this study provides a scientific basis for optimizing dairy processing technology and further developing and applying yak milk.

Conjugation of dual-natural milk-derived proteins with fucoidan to prepare controllable glycosylation products via dielectric barrier discharge cold plasma

This study reported that fibrillar bridges (whey protein isolate nanofibrils, WPNs) were used to associate the casein (CA) nanoparticles through the pH-driven method to obtain the self-assembled WPN-CA complexes. Then, a novel technology involving cold plasma (CP) was innovatively proposed to enhance the protective properties of complexes. The confirmation of structural transitions and interactions resulting from the adjustment of WPN-to-CA ratios (WtCs) led to the identification of the complexes named WPCA (WtC1.0:1). Next, the results showed a rapid conjugation between WPCA and fucoidan (FD) with a degree of grafting of 16.03 % after 10 min CP treatment. The coupling of WPCA with FD to form conjugates was confirmed by SDS-PAGE analysis, indicating covalent bonds' formation. FTIR spectroscopy revealed an augmentation in the intensity of the OH stretching vibration of the WPCA-FD conjugate, concomitant with a decrease in β-turns and an elevation in β-sheets content. Furthermore, the application of glycosylation treatment to WPCA-FD resulted in a noteworthy enhancement of both the thermal stability and antioxidant activity characteristics of WPCA. Our findings move a step forward, as CP-assisted Maillard reaction has shown potential as an efficient and energy-saving method to enhance the functional properties of milk-derived proteins in the food industry.

Structure and in vitro digestion characteristics of skim goat milk protein during processing: effects of fat separation

BACKGROUND

Although nonfat milk has been used worldwide in the industrial dairy process, little is known about the effects of fat separation during the manufacturing process on skim milk's structural and digestive properties. This study investigated the effects of the manufacturing process on the structure and in vitro digestion properties of skim goat milk, particularly emphasizing fat separation.

RESULTS

Changes in the surface charge and hydrophobicity of milk proteins caused by fat separation resulted in oxidation and aggregation in the subsequent homogenization, heat and spray-drying processing, which affected its digestibility. Compared with separation by dish separator (DS), skim milk after tubular centrifugal separation (CS) showed a higher initial and final digestibility. The CS samples also had a lower surface hydrophobicity level and higher free sulfhydryl content, ζ-potential, and average particle size (P < 0.05). Goat milk protein after CS was more readily oxidized and aggregated during the subsequent homogenization and heat treatment, as evidenced by the higher carbonyl content and particle size. Centrifugal separation also converted more β-sheets to α-helices, thus promoting the aggregation of oxidized skim milk protein.

CONCLUSION

The skim milk after CS and DS demonstrated different structural and digestive properties. Skim goat milk products after CS were more susceptible to oxidant-induced protein structural changes, resulting in higher protein digestibility. These findings provide insights into the mechanism involved in the control of gastric digestion of skim milk during manufacturing process. © 2023 Society of Chemical Industry.

The Stability, Rheological Properties and Interfacial Properties of Oil-in-Water (O/W) Emulsions Prepared from Dielectric Barrier Discharge (DBD) Cold Plasma-Treated Chickpea Protein Isolate and Myofibrillar Protein Complexes

In order to increase the development and utilization of chickpea protein isolate (CPI) and improve the stability of myofibrillar protein (MP) emulsions, the effect of dielectric barrier discharge (DBD) plasma-modified CPI on the emulsifying properties of MP was investigated. Three different O/W emulsions were prepared using MP, MP + CPI complex, or MP + DBD-treated CPI complex as the emulsifier. Compared with the emulsion prepared from MP, the emulsifying activity index and stability of DBD-treated CPI and MP complex (MP + CPIDBD) were increased (p < 0.05) from 55.17 m2/g to 74.99 m2/g and 66.31% to 99.87%, respectively. MP + CPIDBD produced more stable emulsions with the lowest Turbiscan stability index (TSI) values for a given 3600 s. At shear rates from 0 to 1000-1, MP + CPIDBD-stabilized emulsions had higher viscosities, which helped to reduce the chance of aggregation between oil droplets. The optical microscope and particle size distribution of emulsions showed that MP + CPIDBD emulsions had the lowest droplet size (d4,3) and exhibited more uniform distribution. MP + CPIDBD emulsions had lower interfacial tension. DBD pretreatment increased the adsorbed protein content in the emulsion stabilized by MP + CPIDBD as compared to the MP + CPI complex and promoted the adsorption of CPI by higher ratios of adsorbed proteins as indicated by its intensity in SDS-PAGE. Scanning electron microscopy confirmed that the emulsion prepared from MP + CPIDBD had smaller particle size and more uniform dispersion. Therefore, using DBD-modified CPI could enhance the stability of MP emulsions.

Stability of milk proteins subjected to UHT treatments: challenges and future perspectives

Ultra-high temperature (UHT) treatments are of high economic relevance for food industries because they contribute to extending the shelf life of food products and facilitating their distribution. In the dairy segment, UHT treatments are applied to a wide range of products containing variable protein amounts. In this sense, the changes in the molecular structure of milk proteins induced by the severity of UHT treatments may lead to fouling in equipment during processing or sedimentation and/or gelation during storage. Nowadays, these concerns are even more relevant due to the increasing demand for UHT-treated high-protein beverages. This review will discuss the two main strategies used by industries to increase the stability of milk proteins during and/or after UHT treatments: (i) addition of chelating agents and (ii) use of polysaccharides. Moreover, the challenges and opportunities associated with promising strategies to improve the stability of milk proteins during and/or after UHT treatments will be covered in this review. The information compiled will be useful to guide researchers and industries in developing more stable UHT dairy products in harmony with consumers' demands.

Effects of Pulsed Electric Field on the Physicochemical and Structural Properties of Micellar Casein

Pulsed electric field (PEF) as a green processing technology is drawing greater attention due to its eco-friendliness and potential to promote sustainable development goals. In this study, the effects of different electric field strengths (EFS, 0-30 kV/cm) on the structure and physicochemical features of casein micelles (CSMs) were investigated. It was found that the particle sizes of CSMs increased at low EFS (10 kV/cm) but decreased at high EFS (30 kV/cm). The absolute ζ-potential at 30 kV/cm increased from -26.6 (native CSMs) to -29.5 mV. Moreover, it was noticed that PEF treatment leads to changes in the surface hydrophobicity; it slightly increased at low EFS (10 kV/cm) but decreased at EFS > 10 kV/cm. PEF enhanced the protein solubility from 84.9 (native CSMs) to 87.1% (at 10 kV/cm). PEF at low EFS (10 kV/cm) intensified the emission fluorescence spectrum of CSMs, while higher EFS reduced the fluorescence intensity compared to native CSMs. Moreover, the analysis of the Amide Ι region showed that PEF-treated CSMs reduced the α-helix and increased the β-sheet content. Raman spectra confirmed that PEF treatment > 10 kV/cm buried tyrosine (Tyr) residues in a hydrophobic environment. It was also found that PEF treatment mainly induced changes in the disulfide linkages. In conclusion, PEF technology can be employed as an eco-friendly technology to change the structure and physiochemical properties of CSMs; this could improve their techno-functional properties.

Cold plasma as a pre-treatment for processing improvement in food: A review

Thermal processes can be very damaging to the nutritional and sensory quality of foods. Non-thermal technologies have been applied to reduce the impact of heat on food, reducing processing time and increasing its efficiency. Among many non-thermal technologies, cold plasma is an emerging technology with several potential applications in food processing. This technique can be used to preserve and sanitize food products, and act as a pre-treatment for drying, extraction, cooking, curing, and hydrogenation of foods. Furthermore, the reacting plasma species formed during the plasma application can change positively the sensory and nutritional aspects of foods. The aim of this review is to analyze the main findings on the application of cold plasma as a pre-treatment technology to improve food processing. In its current maturity stage, the cold plasma technology is suitable for reducing drying time, increasing extraction efficiency, as well as curing meats. This technology can convert unsaturated into saturated fats, without forming trans isomers, which can be an alternative to healthier foods. Although many advantages come from cold plasma applications, this technology still has several challenges, such as the scaling up, especially in increasing productivity and treating foods with large formats. Optimization and control of the effects of plasma on nutritional and sensory quality are still under investigation. Further improvement of the technology will come with a higher knowledge of the effects of plasma on the different chemical groups present in foods, and with the development of bigger or more powerful plasma systems.

Strategies for Exploiting Milk Protein Properties in Making Films and Coatings for Food Packaging: A Review

Biopolymers of different natures (carbohydrates, proteins, etc.) recovered from by-products of industrial processes are increasingly being studied to obtain biomaterials as alternatives to conventional plastics, thus contributing to the implementation of a circular economy. The food industry generates huge amounts of by-products and waste, including unsold food products that reach the end of their shelf life and are no longer usable in the food chain. Milk proteins can be easily separated from dairy waste and adapted into effective bio-based polymeric materials. Firstly, this review describes the relevant properties of milk proteins and the approaches to modifying them for subsequent use. Then, we provide an overview of recent studies on the development of films and coatings based on milk proteins and, where available, their applications in food packaging. Comparisons among published studies were made based on the formulation as well as production conditions and technologies. The role of different additives and modifiers tested for the performances of films and coatings, such as water vapor permeability, tensile strength, and elongation at break, were reviewed. This review also outlines the limitations of milk-protein-based materials, such as moisture sensitivity and brittleness. Overall, milk proteins hold great potential as a sustainable alternative to petroleum-based polymers. However, their use in food packaging materials at an industrial level remains problematic.

Changes in the functional properties of casein conjugates prepared by Maillard reaction with pectin or arabinogalactan

The aim of this study was to prepare conjugates of casein (CA) with pectin (CP) or arabinogalactan (AG) by the Maillard reaction (wet-heating) and to investigate the effects of CP or AG on the structural and functional properties of casein. The results indicated that the highest grafting degree of CA with CP or AG was observed at 90 °C for 1.5 h or 1 h, respectively. Secondary structure showed that grafting with CP or AG reduced the α-helix level and increased the random coil level of CA. Glycosylation treatment of CA-CP and CA-AG exhibited lower surface hydrophobicity and higher absolute ζ-potential values, further significantly improving the functional properties of CA (e.g., solubility, foaming property, emulsifying property, thermal stability, and antioxidant activity). Accordingly, our results indicated that it is feasible for CP or AG to improve the functional properties of CA by the Maillard reaction.

Protein modifications due to homogenisation and heat treatment of cow milk

This research paper aimed to locate protein modifications caused by treatment of milk and determine if the modification locations were consistent. The majority of milk for consumption is homogenised using pressure and heat, and this causes changes in the location of proteins in the milk as well as protein modifications. To investigate these proteomic changes, raw milk was pasteurised (72°C, 15 s), then, to separate the treatment for homogenisation, heated at these different pressures and temperatures: 45°C without no pressure applied, 45°C with 35 MPa, 80°C without pressure applied and 80°C, with 35 MPa. Proteomic analysis was done after separating the milk into three fractions: whey, casein and cream. Protein modifications in each fraction were examined and we found Maillard products as well as oxidation to be of interest. The proteins were also further identified and characterised to compare protein modification sites and differences in proteins present in the cream resulting from homogenisation and/or pasteurisation. This experiment showed that both heat and pressure during homogenisation can cause increases in protein modifications as a result of oxidation or the Maillard reaction. Total cysteine oxidation and total proline oxidation differed between treatments although this was only significantly different for cysteine. It was observed that protein modifications occurred in the same location in the protein sequence rather than in random locations which we highlighted by examining α-S1-casein, lactadherin and β-lactoglobulin.

Binary Hydrogels: Induction Methods and Recent Application Progress as Food Matrices for Bioactive Compounds Delivery-A Bibliometric Review

Food hydrogels are biopolymeric materials made from food-grade biopolymers with gelling properties (proteins and polysaccharides) and a 3D network capable of incorporating large amounts of water. They have sparked considerable interest because of their potential and broad application range in the biomedical and pharmaceutical sectors. However, hydrogel research in the field of food science is still limited. This knowledge gap provides numerous opportunities for implementing their unique properties, such as high water-holding capacity, moderated texture, compatibility with other substances, cell biocompatibility, biodegradability, and high resemblance to living tissues, for the development of novel, functional food matrices. For that reason, this article includes a bibliometric analysis characterizing research trends in food protein-polysaccharide hydrogels (over the last ten years). Additionally, it characterizes the most recent developments in hydrogel induction methods and the most recent application progress of hydrogels as food matrices as carriers for the targeted delivery of bioactive compounds. Finally, this article provides a future perspective on the need to evaluate the feasibility of using plant-based proteins and polysaccharides to develop food matrices that protect nutrients, including bioactive substances, throughout processing, storage, and digestion until they reach the specific targeted area of the digestive system.

Effects of high-temperature short-time processing on nutrition quality of Pacific saury (Cololabis saira) using extracted fatty acids as the indicator

Microwave thermal processing is a promising technology to greatly improve product quality by achieving high-temperature short-time (HTST) processing for solid foods. And the non-thermal effect of microwave fields on nutritional quality is a major public concern. To distinguish the non-thermal effect of microwave fields, the thermal effect of HTST processing should be revealed first. The objective of this study was to investigate the effects of different HTST processing on quality of Pacific saury fillets using extracted fatty acids as the indicator. A self-developed thermal processing system was used to conduct the HTST processing with different heating rate (5.48-18.30°C/min), maximum heating temperature (123, 133 °C), and thermal processing level (F 0 = 3.0 min, 6.0 min). Results showed that the extraction coefficient of lipids and fatty acids decreased with increasing heating rates, which implied less thermal damage of fish tissue, while higher thermal processing level increased these extraction coefficients. However, higher maximum processing temperature caused serious thermal damage of fatty acids, especially for PUFAs. Furthermore, changing pattern of each fatty acid during different HTST processing was revealed, which provided fundamental data for designing microwave thermal processing and exploring microwave non-thermal effects.

Recent advances on the impact of novel non-thermal technologies on structure and functionality of plant proteins: A comprehensive review

The recent trend in consumption of plant-based protein over animal protein opens up a new avenue for sustainable agriculture practice, less environmental impact and greenhouse gas emission. The modification of plant-based proteins by novel non-thermal technologies includes the structural transformation followed by the modulation of their functional properties that are exploited to develop a protein ingredient system for application in food formulation. This review explores the impact of non-thermal process technologies on structural modification of plant proteins followed by improvement in protein's function in food formulation. Novel concepts articulating the impact of non-thermal technologies on structural and functional modification of plant proteins affecting it's digestibility and bioavailability are addressed. Limitations and prospects of applying non-thermal technologies in developing an alternative plant-based protein food system are also summarized. Non-thermal processes are considered as the emerging technologies that results in conformational changes in secondary, tertiary and quaternary structure of plant proteins which helps in modification of functional properties without jeopardizing the organoleptic properties and bioactivity of the protein. However, extensive future study is needed to optimize the non-thermal process parameters along with the finding of new protein sources to achieve healthy and sustainable plant-based food system.

Gel performance of surimi induced by various thermal technologies: A review

Heating is a vital step in the gelation of surimi. Conventional water bath heating (WB) has the advantages of easy operation and low equipment requirements. However, the slow heat penetration during WB may lead to poor gel formation or gels prone to deterioration, especially with one-step heating. The two-step WB is time-consuming, and a large amount of water used tends to cause environmental problems. This review focuses on key factors affecting the quality of surimi gels in various heating technologies, such as surimi protein structure, chemical forces, or the activity of endogenous enzymes. In addition, the relationships between these factors and the gel performance of surimi under various heating modes are discussed by analyzing the heating temperature and heating rate. Compared with WB, the gel performance can be improved by controlling the heating conditions of microwave heating and ohmic heating, which are mainly achieved by changing the molecular structure of myofibrillar proteins or the activity of endogenous enzymes in surimi. Nevertheless, the novel thermal technologies still face several limitations and further research is needed to realize large-scale industrial production. This review provides ideas and directions for developing heat-induced surimi products with excellent gel properties.

Understanding the factors affecting the surface chemical composition of dairy powders: a systematic review

Dairy powder, with abundant chemical components such as protein, fat, and lactose possessing diverse physical and chemical structures, can exhibit a surface composition distinct from its bulk content during the conversion of liquid milk into dry powder. Surface chemical composition is a significant parameter in the dairy industry, as it is directly associated with the techno-functional properties of dairy powder products. The current work provides an overview of the factors influencing the surface composition of dairy powders such as the bulk composition of raw milk (animal source and formulation), liquid dairy processing (homogenization, thermal treatment, and evaporation), the drying process (drying methods as well as operating conditions during the most commonly used spray drying), and storage conditions (temperature, relative humidity, and duration). The underlying mechanisms involved in the variations of particle surface composition include the mechanical properties of emulsion, milk fat globules redistribution caused by mechanical forces, adsorption competition and interactions of ingredients at the water/air interface, dehydration-induced alterations in particle structure, corresponding solid/solutes segregation differentiation during spray drying, and lactose crystallization-induced increase in surface fat during storage. Additionally, future research is suggested to explore the effects of emerging processing technologies on the surface composition modification of dairy powders.

Modifying the physicochemical properties, solubility and foaming capacity of milk proteins by ultrasound-assisted alkaline pH-shifting treatment

This study investigated the effects of different treatment of alkaline pH-shifting on milk protein concentrate (MPC), micellar casein concentrate (MCC) and whey protein isolate (WPI) assisted by the same ultrasound conditions, including changes in the physicochemical properties, solubility and foaming capacity. The solubility of milk proteins had a significant increase with gradual enhancement of ultrasound-assisted alkaline pH-shifting (p < 0.05), especially for MCC up to 99.50 %. Also, treatment made a significant decline in the particle size of MPC and MCC, as well as the turbidity of the proteins (p < 0.05). The foaming capacity of MPC, MCC, and WPI was all improved, especially at pH 11, and at this pH, the milk protein also showed the highest surface hydrophobicity. The best foaming capacity at pH 11 was the result of the combined effect of particle size, potential, protein conformation, solubility, and surface hydrophobicity. In conclusion, ultrasound-assisted pH-shifting treatment was found to be effective in improving the physicochemical properties and solubility and foaming capacity of milk proteins, especially MCC, with promising application prospect in food industry.

Ultrasonication as a novel processing alternative to pasteurization for camel milk: Effects on microbial load, protein profile, and bioactive properties

Ultrasonic technology presents a promising novel tool in the food industry for the processing of milk and dairy products. In this study, we investigated the effects of ultrasonication (US) as an alternative to thermal pasteurization for stabilization of the bioactive properties of camel milk. Camel and bovine milk samples were subjected to US at 6 different power levels (US1-US6), and 1 set of each type of milk was concurrently subjected to flash heat pasteurization (FHP) for comparative analysis (100 mL; n = 4). The microbiological and bioactive parameters of the samples were analyzed during 7 d of storage at 4°C. In both milk types subjected to US ≥ 140 W (US3), the bacterial load was reduced by almost 4 log cycles and complete reduction of microbial load was achieved with US = 170 W and US = 210 W (US5 and US6 treatments, respectively). No significant changes in protein patterns were observed with either FHP or US treatment. In addition, bioactive properties (cholesteryl esterase and pancreatic lipase inhibition) were either enhanced or retained at US3 or higher. 2,2'-Azino-bis-3-ethylbenzthiazoline-6-sulfonic acid and ferric reducing antioxidant power activities in camel milk were decreased after FHP treatment but increased or retained upon US, particularly at US3 and US4 (160 W). Overall, under our experimental conditions, US4 was effective in completely reducing the microbial count, while concomitantly retaining different bioactive properties of both camel and bovine milk. These outcomes highlight the potential of US at 160 W as an efficient nonthermal alternative processing method for milk.

Pulsed Electric Field: Fundamentals and Effects on the Structural and Techno-Functional Properties of Dairy and Plant Proteins

Dairy and plant-based proteins are widely utilized in various food applications. Several techniques have been employed to improve the techno-functional properties of these proteins. Among them, pulsed electric field (PEF) technology has recently attracted considerable attention as a green technology to enhance the functional properties of food proteins. In this review, we briefly explain the fundamentals of PEF devices, their components, and pulse generation and discuss the impacts of PEF treatment on the structure of dairy and plant proteins. In addition, we cover the PEF-induced changes in the techno-functional properties of proteins (including solubility, gelling, emulsifying, and foaming properties). In this work, we also discuss the main challenges and the possible future trends of PEF applications in the food proteins industry. PEF treatments at high strengths could change the structure of proteins. The PEF treatment conditions markedly affect the treatment results with respect to proteins' structure and techno-functional properties. Moreover, increasing the electric field strength could enhance the emulsifying properties of proteins and protein-polysaccharide complexes. However, more research and academia-industry collaboration are recommended to build highly effective PEF devices with controlled processing conditions.

Application of emerging technologies to obtain legume protein isolates with improved techno-functional properties and health effects

Current demand of consumers for healthy and sustainable food products has led the industry to search for different sources of plant protein isolates and concentrates. Legumes represent an excellent nonanimal protein source with high-protein content. Legume species are distributed in a wide range of ecological conditions, including regions with drought conditions, making them a sustainable crop in a context of global warming. However, their use as human food is limited by the presence of antinutritional factors, such as protease inhibitors, lectins, phytates, and alkaloids, which have adverse nutritional effects. Antitechnological factors, such as fiber, tannins, and lipids, can affect the purity and protein extraction yield. Although most are removed or reduced during alkaline solubilization and isoelectric precipitation processes, some remain in the resulting protein isolates. Selection of appropriate legume genotypes and different emerging and sustainable facilitating technologies, such as high-power ultrasound, pulsed electric fields, high hydrostatic pressure, microwave, and supercritical fluids, can be applied to increase the removal of unwanted compounds. Some technologies can be used to increase protein yield. The technologies can also modify protein structure to improve digestibility, reduce allergenicity, and tune technological properties. This review summarizes recent findings regarding the use of emerging technologies to obtain high-purity protein isolates and the effects on techno-functional properties and health.

Multiscale Approach to Dairy Products Design

Dairy products are among the most popular nutritious foods in the world. Understanding the relationship between the composition, process, and structural properties at different scales (molecular, microscopic, and macroscopic) is fundamental to designing dairy products. This review highlights the need to analyze this relationship from different scales as an essential step during product design through a multiscale approach.

High-pressure microfluidization of whey proteins: Impact on protein structure and ability to bind and protect lutein

Dynamic high-pressure homogenization microfluidization (DHPM) is a versatile emerging technology that may be applied to food processing to achieve several goals. DHPM may, depending on nature of the molecules and the working parameters, induce changes in protein structure, which may improve or impair their techno-functional properties and ability to bind other molecules. In this context, DHPM (12 passes, 120 MPa), coupled or not to a cooling device, was applied to β-lactoglobulin (β-lg) and whey protein isolate (WPI) dispersions. Minor changes in the structure of whey proteins were induced by DHPM with sample cooling; although, when sample cooling was not applied, aggregation and increases of around 30% of protein surface hydrophobicity were noticeable for the WPI dispersion. The association constant between the proteins and lutein was in the magnitude of 10⁴ M^-1, and lutein photodegradation constant diminished about 3 times in the presence of proteins, compared to in their absence.

Effects of ultrasound on the techno-functional properties of milk proteins: A systematic review

Techno-functional properties of proteins, including foaming capacity, water holding capacity, solubility, emulsifying properties, and gelling formation, are known to play an important role in food processing technologies and be considered significant contributors in the development of new food products. In recent years, research has proven that ultra-sonication can influence the techno-functional properties of proteins through modification of their molecular structure. In this study, Scopus, Web of Science, PubMed, Google Scholar, ProQuest, and FSTA (Food Science and Technology Abstracts) databases were searched to find all related articles from 2000 to 2021. The results showed that the improving effects of ultrasound on each of the functional properties of proteins is entirely dependent on the ultrasound conditions and the type of ultrasound-treated protein. The results of functional parameters of milk proteins also showed that ultrasound could modify these properties. However, further studies are required to reach conclusive results that permit the employment of ultrasound to improve the techno-functional properties of milk proteins.

Modifying the plant proteins techno-functionalities by novel physical processing technologies: a review

Plant proteins have recently gained market demand and momentum due to their environmentally friendly origins and health advantages over their animal-derived counterparts. However, their lower techno-functionalities, digestibility, bioactivities, and anti-nutritional compounds have limited their application in foods. Increased demand for physically modified proteins with better techno-functionalities resulted in the application of different thermal and non-thermal treatments to modify plant proteins. Novel physical processing technologies (NPPT) considered 'emerging high-potential treatments for tomorrow' are required to alter protein functionality, enhance bioactive peptide formations, reduce anti-nutritional, reduce loss of nutrients, prevention of damage to heat liable proteins and clean label. NPPT can be promising substitutes for the lower energy-efficient and aggressive thermal treatments in plant protein modification. These facts captivated the interest of the scientific community in designing novel functional food systems. However, these improvements are not verifiable for all the plant proteins and depend immensely on the protein type and concentration, other environmental parameters (pH, ionic strength, temperature, and co-solutes), and NPPT conditions. This review addresses the most promising approaches of NPPT for the modification of techno-functionalities of plant proteins. New insights elaborating the effect of NPPTs on proteins' structural and functional behavior in relation to other food components are discussed. The combined application of NPPTs in the field of plant-based bioactive functionalities is also explored.

Applications of novel processing technologies to enhance the safety and bioactivity of milk

Bioactive compounds in food can have high impacts on human health, such as antioxidant, antithrombotic, antitumor, and anti-inflammatory activities. However, many of them are sensitive to thermal treatments incurred during processing, which can reduce their availability and activity. Milk, including ovine, caprine, bovine, and human is a rich source of bioactive compounds, including immunoglobulins, vitamins, and amino acids. However, processing by various novel thermal and non-thermal technologies has different levels of impacts on these compounds, according to the studies reported in the literature, predominantly in the last 10 years. The reported effect of these technologies either covers microbial inactivation or the bioactive composition; however, there is a lack of comprehensive compilation of studies that compare the effect of these technologies on bioactive compounds in milk (especially, caprine and ovine) to microbial inactivation at similar settings. This research gap makes it challenging to conclude on the specific processing parameters that could be optimized to achieve targets of microbial safety and nutritional quality at the same time. This review covers the effect of a wide range of thermal and non-thermal processing technologies including high-pressure processing, pressure-assisted thermal sterilization, pulsed-electric field treatment, cold plasma, microwave-assisted thermal sterilization, ultra-high-pressure homogenization, ultrasonication, irradiation on the bioactive compounds as well as on microbial inactivation in milk. Although a combination of more than one technology could improve the reduction of bacterial contaminants to meet the required food safety standards and retain bioactive compounds, there is still scope for research on these hurdle approaches to simultaneously achieve food safety and bioactivity targets.

Proteins in Food Systems-Bionanomaterials, Conventional and Unconventional Sources, Functional Properties, and Development Opportunities

Recently, food companies from various European countries have observed increased interest in high-protein food and other products with specific functional properties. This review article intends to present proteins as an increasingly popular ingredient in various food products that frequently draw contemporary consumers' attention. The study describes the role of conventional, unconventional, and alternative sources of protein in the human body. Furthermore, the study explores proteins' nutritional value and functional properties, their use in the food industry, and the application of proteins in bionanomaterials. Due to the expected increase in demand for high-protein products, the paper also examines the health benefits and risks of consuming these products, current market trends, and consumer preferences.