Assessment of occupational exposure to stainless steel welding fumes – A human biomonitoring study

Frequencies of chromosomal aberrations and related biochemical parameters in welders

Stainless steel welders are exposed to heavy filler metals. We evaluated the concentration of these metals in whole blood and urine, and the relevant biochemical parameters in relation to the total chromosomal aberrations (CAs), chromatid-type (CTA-type, CTAs) and chromosome-type (CSA-type, CSAs), in 117 welders and control individuals. Statistically higher concentrations of the total Cr, Ni and Mn were observed in whole blood and urine of welders, and the concentrations were higher in welders who smoked. On the contrary, concentrations of urinary heavy metals Cr and Mn adjusted for creatinine were significantly higher in the control groups. A statistically higher frequency of total CAs was observed in the whole group of welders, and also in the non-smoking welders, as compared to controls. The frequency of total CAs significantly correlated with the concentration of Cr, Ni and Mn in whole blood (R=0.61, P˂0.0001, R=0.33, P˂0.0001 and R=0.66, P˂0.0001, respectively), with urinary concentrations of Ni and Mn (R=0.27, P=0.003 and R=0.28, P=0.003, respectively) and with urinary concentrations of Cr, Ni and Mn adjusted for creatinine (R=0.22, P=0.029, R=0.26, P=0.005 and R=0.20, P=0.030, respectively). Likewise, the frequency of CTA-types significantly correlated with the concentration of Cr and Mn in whole blood (R=0.31, P=0.0007 and R=0.34, P=0.0002). The frequency of CSA-types significantly correlated with concentrations of Cr, Ni and Mn in whole blood (R=0.43, P˂0.0001, R=0.38, P˂0.0001 and R=0.46, P˂0.0001, respectively). The statistically higher values of serum creatinine and total bilirubin were detected in all welders, as well as in smokers when compared to the corresponding controls. The exposure to heavy metals in welders increased the frequencies of CAs and altered the balance between urinary excretion of heavy metals and their possible accumulation.

Manganese accumulation in red blood cells as a biomarker of manganese exposure and neurotoxicity

Although overexposure to manganese (Mn) is known to cause neurotoxic damage, effective exposure markers for assessing Mn loading in Mn-exposed workers are lacking. Here, we construct a Mn-exposed rat model to perform correlation analysis between Mn-induced neurological damage and Mn levels in various biological samples. We combine this analysis with epidemiological investigation to assess whether Mn concentrations in red blood cells (MnRBCs) and urine (MnU) can be used as valid exposure markers. The results show that Mn exposure resulted in neurotoxic damage in rats and that MnRBCs correlated well with neurological damage, showing potential as a novel Mn exposure biomarker. These findings provide a basis for health monitoring of Mn-exposed workers and the development of more appropriate biological exposure limits.

Effects of the SEMA4B gene on hexavalent chromium [Cr(VI)]-induced malignant transformation of human bronchial epithelial cells

Our previous study identified the potential of SEMA4B methylation level as a biomarker for hexavalent chromium [Cr(VI)] exposure. This study aimed to investigate the role of the SEMA4B gene in Cr(VI)-mediated malignant transformation of human bronchial epithelial (BEAS-2B) cells. In our population survey of workers, the geometric mean [95% confidence intervals (CIs)] of Cr in blood was 3.80 (0.42, 26.56) μg/L. Following treatment with various doses of Cr(VI), it was found that 0.5 μM had negligible effects on the cell viability of BEAS-2B cells. The expression of SEMA4B was observed to decrease in BEAS-2B cells after 7 days of treatment with 0.5 μM Cr(VI), and this downregulation continued with increasing passages of Cr(VI) treatment. Chronic exposure to 0.5 μM Cr(VI) enhanced the anchorage-independent growth ability of BEAS-2B cells. Furthermore, the use of a methylation inhibitor suppressed the Cr(VI)-mediated anchorage-independent growth in BEAS-2B cells. Considering that Cr levels exceeding 0.5 μM can be found in human blood due to occupational exposure, the results suggested a potential carcinogenic risk associated with occupational Cr(VI) exposure through the promotion of malignant transformation. The in vitro study further demonstrated that Cr(VI) exposure might inhibit the expression of the SEMA4B gene to promote the malignant transformation of BEAS-2B cells.

Hexavalent chromium still a concern in Sweden - Evidence from a cross-sectional study within the SafeChrom project

OBJECTIVES

Hexavalent chromium (Cr(VI)) is classified as a human carcinogen. Occupational Cr(VI) exposure can occur during different work processes, but the current exposure to Cr(VI) at Swedish workplaces is unknown.

METHODS

This cross-sectional study (SafeChrom) recruited non-smoking men and women from 14 companies with potential Cr(VI) exposure (n = 113) and controls from 6 companies without Cr(VI) exposure (n = 72). Inhalable Cr(VI) was measured by personal air sampling (outside of respiratory protection) in exposed workers. Total Cr was measured in urine (pre- and post-shift, density-adjusted) and red blood cells (RBC) (reflecting Cr(VI)) in exposed workers and controls. The Bayesian tool Expostats was used to assess risk and evaluate occupational exposure limit (OEL) compliance.

RESULTS

The exposed workers performed processing of metal products, steel production, welding, plating, and various chemical processes. The geometric mean concentration of inhalable Cr(VI) in exposed workers was 0.15 μg/m3 (95% confidence interval: 0.11-0.21). Eight of the 113 exposed workers (7%) exceeded the Swedish OEL of 5 μg/m3, and the Bayesian analysis estimated the share of OEL exceedances up to 19.6% for stainless steel welders. Median post-shift urinary (0.60 μg/L, 5th-95th percentile 0.10-3.20) and RBC concentrations (0.73 μg/L, 0.51-2.33) of Cr were significantly higher in the exposed group compared with the controls (urinary 0.10 μg/L, 0.06-0.56 and RBC 0.53 μg/L, 0.42-0.72). Inhalable Cr(VI) correlated with urinary Cr (rS = 0.64) and RBC-Cr (rS = 0.53). Workers within steel production showed the highest concentrations of inhalable, urinary and RBC Cr. Workers with inferred non-acceptable local exhaustion ventilation showed significantly higher inhalable Cr(VI), urinary and RBC Cr concentrations compared with those with inferred acceptable ventilation. Furthermore, workers with inferred correct use of respiratory protection were exposed to significantly higher concentrations of Cr(VI) in air and had higher levels of Cr in urine and RBC than those assessed with incorrect or no use. Based on the Swedish job-exposure-matrix, approximately 17 900 workers were estimated to be occupationally exposed to Cr(VI) today.

CONCLUSIONS

Our study demonstrates that some workers in Sweden are exposed to high levels of the non-threshold carcinogen Cr(VI). Employers and workers seem aware of Cr(VI) exposure, but more efficient exposure control strategies are required. National strategies aligned with the European strategies are needed in order to eliminate this cause of occupational cancer.

Biomonitoring of exposure to multiple metal components in urine, hair and nails of apprentice welders performing shielded metal arc welding (SMAW)

Welding fumes are associated with various diseases. Increased air levels of metals were reported during welding. However, few multielement biomonitoring studies were conducted to assess the actual dose of metal components absorbed in apprentice welders in a learning environment. This research aimed to establish the nature and level of exposure to welding fumes and their metallic components in apprentice welders performing 'Shielded Metal Arc Welding' (SMAW), based on multi-element and multi-matrix analyses. A total of 86 apprentice welders were recruited in three different schools in Montreal, Québec, Canada. Twenty-one elements were measured in urine, hair, fingernail, and toenail samples collected at the beginning of the program and at the end of SMAW practical training. Concentrations of welding fumes and 12 metals were also determined in personal respirable air samples collected over a typical workday in a subgroup of 19 apprentices. Levels of manganese (Mn), iron (Fe) and nickel (Ni) in urine and Mn in hair were higher in samples taken at the end of the SMAW module compared to the beginning of training, while there was no significant difference for the other elements or for nail concentrations. Geometric mean concentrations [5th-95th percentiles] reached 0.31 [0.032-2.84], 9.4 [3.1-51] and 0.87 [0.35-3.1] μg/g creat. in post-shift urine, respectively, for Mn, Fe and Ni, and 0.37 [0.46-6.4] μg Mn/g hair at the end of SWAW. Median concentrations [5th-95th percentiles] were 29 [4.6-1200], 120 [27-3100] and 0.31 [ Collapse

Key Words

• Biomonitoring
• Metalloids
• Metals
• Occupational exposure
• Shielded metal arc welding
• Welding fume exposure

Collapse

MESH Headings

• Humans
• Nails/chemistry
• Air Pollutants, Occupational/analysis
• Biological Monitoring
• Welding
• Metal Workers
• Metals/analysis
• Occupational Exposure/analysis
• Manganese/analysis
• Nickel
• Gases

Collapse

Grants Collapse

Affiliation(s)

Jairo Buitrago Cortes Department of Environmental and Occupational Health, Chair in Toxicological Risk Assessment and Management, and Public Health Research Center (CReSP), University of Montreal, Roger-Gaudry Building, U436, P.O. Box 6128, Main Station, Montreal, Quebec, H3C 3J7, Canada
Philippe Sarazin Chemical and Biological Hazards Prevention, Institut de recherche Robert-Sauvé en santé et en sécurité du travail, 505 Boulevard de Maisonneuve O, Montréal, Québec, H3A 3C2, Canada
Denis Dieme Department of Environmental and Occupational Health, Chair in Toxicological Risk Assessment and Management, and Public Health Research Center (CReSP), University of Montreal, Roger-Gaudry Building, U436, P.O. Box 6128, Main Station, Montreal, Quebec, H3C 3J7, Canada
Jonathan Côté Department of Environmental and Occupational Health, Chair in Toxicological Risk Assessment and Management, and Public Health Research Center (CReSP), University of Montreal, Roger-Gaudry Building, U436, P.O. Box 6128, Main Station, Montreal, Quebec, H3C 3J7, Canada
Capucine Ouellet Chemical and Biological Hazards Prevention, Institut de recherche Robert-Sauvé en santé et en sécurité du travail, 505 Boulevard de Maisonneuve O, Montréal, Québec, H3A 3C2, Canada
Naïma El Majidi Department of Environmental and Occupational Health, Chair in Toxicological Risk Assessment and Management, and Public Health Research Center (CReSP), University of Montreal, Roger-Gaudry Building, U436, P.O. Box 6128, Main Station, Montreal, Quebec, H3C 3J7, Canada
Michèle Bouchard Department of Environmental and Occupational Health, Chair in Toxicological Risk Assessment and Management, and Public Health Research Center (CReSP), University of Montreal, Roger-Gaudry Building, U436, P.O. Box 6128, Main Station, Montreal, Quebec, H3C 3J7, Canada.

Collapse

Assessment of welding fume impacts in a confined workplace by two extraction patterns - a case study of small-scale manufacturing industries

Welding fume exposure at work is recognized as a known concern for public health. This study aims to assess the welding fumes produced during welding using two different extraction patterns and to compare their influences. A thorough assessment of domestic arc welders in the erode district of India was done to assess their exposure to welding gases. The survey results chose the gas metal arc welding (GMAW) process for future investigation. The stainless-steel grade SS 316 L was used in this study. To weld 3-mm, 5-mm, and 6-mm-thick stainless-steel specimens, ER316 L filler wire and four shielding gas compositions were used. Two distinct, cost-effective welding hoods with a square duct section and a conical duct section were constructed to examine welding gases. The produced fume was collected on a 240 mm glass fibre filter and re-weighted during welding. Gas flow rates of 5, 10, and 15 LPM were investigated, with current intensities of 150A, 200A, and 275A. A novel attempt has been made to compare fume formation rates (FFR) obtained using two extraction patterns. According to this investigation, weld fume hoods with conical duct sections extract more welding gases than square duct sections. The extraction rate using two extraction patterns was compared. Furthermore, the addition of CO₂ to any shielding gas mixture results in a higher fume formation rate. The experimental FFR values were quite close to the American Welding Society (AWS) specifications. This finding also revealed that welders' socio-demographic characteristics, such as age, marital status, level of education, and work experience, influenced their awareness of occupational hazards and personal protection equipment (PPEs). As a result, there should be a strong emphasis on hazard identification education and strict enforcement of proper PPEs use among small-scale welders in and around the erode district to protect welders from a variety of hazards.

HBM4EU chromates study - Usefulness of measurement of blood chromium levels in the assessment of occupational Cr(VI) exposure

Occupational exposures to hexavalent Chromium (Cr(VI)) can occur in welding, hot working stainless steel processing, chrome plating, spray painting and coating activities. Recently, within the human biomonitoring for Europe initiative (HBM4EU), a study was performed to assess the suitability of different biomarkers to assess the exposure to Cr(VI) in various job tasks. Blood-based biomarkers may prove useful when more specific information on systemic and intracellular bioavailability is necessary. To this aim, concentrations of Cr in red blood cells (RBC-Cr) and in plasma (P-Cr) were analyzed in 345 Cr(VI) exposed workers and 175 controls to understand how these biomarkers may be affected by variable levels of exposure and job procedures. Compared to controls, significantly higher RBC-Cr levels were observed in bath plating and paint application workers, but not in welders, while all the 3 groups had significantly greater P-Cr concentrations. RBC-Cr and P-Cr in chrome platers showed a high correlation with Cr(VI) in inhalable dust, outside respiratory protective equipment (RPE), while such correlation could not be determined in welders. In platers, the use of RPE had a significant impact on the relationship between blood biomarkers and Cr(VI) in inhalable and respirable dust. Low correlations between P-Cr and RBC-Cr may reflect a difference in kinetics. This study showed that Cr-blood-based biomarkers can provide information on how workplace exposure translates into systemic availability of Cr(III) (extracellular, P-Cr) and Cr(VI) (intracellular, RBC-Cr). Further studies are needed to fully appreciate their use in an occupational health and safety context.

Occupational exposure to rare earth elements: Assessment of external and internal exposure

Our study investigated occupational exposure to rare earth elements (REEs) in a major REE processing plant from North China by assessing both external exposure and internal exposure in the workers. An exposure group, including 50 workers in the processing plant, and a control group, including 50 workers from a liquor factory located 150 km away from the exposure group, were recruited in the study. Portable air sampler was employed to accurately measure individual exposure to the external environment, and the data demonstrating significantly higher contamination in the REE processing plant compared with the control group (i.e., 87.5 versus 0.49 μg/m³ of ΣREEs). Blood concentrations were also significantly higher in the exposure group (3.47 versus 2.24 μg/L of ΣREEs). However, the compositional profiles of REEs resembled between the exposure and control group in blood or air particles, indicating the influence of mining/processing activities on the surrounding regions. External exposure in the occupational environment appeared to significantly influence internal REE exposure in the REE processing workers. Some other sociodemographic and occupational factors, including the residence time and the type of work, could also influence occupational exposure to selected REEs. Our data clearly demonstrated the highly elevated REE contamination in both working environment and human bodies compared with the control subjects, raising the critical need for better assessing the health risks from occupational REE exposure and efficient management for occupational hazards.

Biomarkers for occupational manganese exposure

Long-term inhalation exposure to manganese (Mn) metal or its inorganic compounds can result in manganism or subclinical neurofunctional deficits. Studies have described affected workers in Mn dioxide mining, Mn-containing ore crushing and milling facilities, manufacturing of dry-cell batteries, Mn steel and alloy production plants, and in welders. The objective of this study was to critically review existing evidence on the reliability of potential biomarkers of Mn exposure, specifically the relationship between inhalation exposure to Mn particulates in different occupational settings and Mn concentrations in blood and other biological fluids and tissues, with a particular focus on whole blood as a potentially useful medium for measuring internal tissue dose. We also examined available evidence on the relationship between Mn levels in blood and adverse clinical and subclinical neurotoxic outcomes. Three bibliographic databases were searched for relevant studies and identified references were screened by two independent reviewers. Of the 6338 unique references identified, 76 articles were retained for data abstraction. Findings indicate that the relationships between Mn in blood and both external Mn exposure indices and neurofunctional impairments are limited and inconsistent. Different sources of exposure to Mn compounds, heterogeneity in the methodological approaches, and inadequate reporting of essential information limited direct comparison of the reported findings. Among the Mn-exposure biomarkers considered in this review - including biomarkers in blood, plasma, serum, erythrocytes, urine, bone, toenails, fingernails, hair, saliva - biomarkers in whole blood may provide to be most useful in Mn biomonitoring and risk assessment.

Environmental risk of (heavy) metal release from urns into cemetery soils

Cremation of the deceased has become the most common funeral type in many countries in the world, including Germany. The ashes of the cremated human body (cremains) are transferred in an urn and most commonly buried in the soil. However, the possible environmental impacts of cremains on soils and groundwater have been rarely studied. In this context, it is still unclear whether or not the release of (heavy) metals like chromium, zinc, copper, nickel and lead from cremains and urns poses an environmental problem in urn grave soils. The aims of the study were to analyze the (heavy) metal content of two cremains from a 74-year-old male and 70-year-old female, and of soils in 6 cemeteries with urn graves in North and West Germany. Soil samples were taken from below the burial depth of 42 urns (upon expiry of the resting time) and from reference soils without urn burials (same cemetery site and depth). The two cremains differed significantly in their heavy metal content (zinc, nickel, copper, chromium), which originated from metal components of the deceased's clothing or burial objects or may have resulted from contrasting occupational exposure during the deceased's lives. Investigations at the cemetery sites revealed a high variability in (heavy) metal contents in the soil samples from below the buried urns. As expected, the accumulation of some element (e.g., lead and tin) in the soil increased with a higher degradation degree of the urns, but an enrichment in copper, chromium, nickel, and iron was also detected below only slightly corroded but not yet perforated urns, which were often made out of copper-bearing material and other alloying agents. This demonstrated that heavy metal releases into cemetery soils originated from both cremains and urn material.

Modelled lung deposition and retention of welding fume particles in occupational scenarios: a comparison to doses used in vitro

Translating particle dose from in vitro systems to relevant human exposure remains a major challenge for the use of in vitro studies in assessing occupational hazard and risk of particle exposure. This study aimed to model the lung deposition and retention of welding fume particles following occupational scenarios and subsequently compare the lung doses to those used in vitro. We reviewed published welding fume concentrations and size distributions to identify input values simulating real-life exposure scenarios in the multiple path particle dosimetry (MPPD) model. The majority of the particles were reported to be below 0.1 μm and mass concentrations ranged between 0.05 and 45 mg/m3. Following 6-h exposure to 5 mg/m3 with a count median diameter of 50 nm, the tracheobronchial lung dose (0.89 µg/cm2) was found to exceed the in vitro cytotoxic cell dose (0.125 µg/cm2) previously assessed by us in human bronchial epithelial cells (HBEC-3kt). However, the tracheobronchial retention decreased rapidly when no exposure occurred, in contrast to the alveolar retention which builds-up over time and exceeded the in vitro cytotoxic cell dose after 1.5 working week. After 1 year, the tracheobronchial and alveolar retention was estimated to be 1.15 and 2.85 µg/cm2, respectively. Exposure to low-end aerosol concentrations resulted in alveolar retention comparable to cytotoxic in vitro dose in HBEC-3kt after 15-20 years of welding. This study demonstrates the potential of combining real-life exposure data with particle deposition modelling to improve the understanding of in vitro concentrations in the context of human occupational exposure.

Occupational Exposure to Manganese Among Welders: Association Between Airborne Manganese Concentration and Blood Manganese Levels

Background: Manganese (Mn) is an essential element for the human body, but it can cause adverse effects on the Central Nervous System at high doses. Exposure to manganese fumes during welding can harm welders' health. Objectives: The current study aimed to measure manganese produced by shielded metal arc welding (SMAW) in the breathing zone air and blood of welders and investigate the relationship between manganese concentrations in air and blood. Methods: In this descriptive-analytical cross-sectional study, 35 welders were enrolled as the exposed group and 40 office workers as the control group. Manganese concentration in air was measured according to NIOSH method 7301. Air and blood sample analyses were carried out by ICP-OES. Statistical analysis was performed with MINITAB 17. Data were analyzed using Pearson correlation coefficient, one-sample t-test, paired t-test, and logistic regression. The significance level was set at P < 0.05. Result: The mean concentration of welding respirable particles and manganese fumes were 9.56 ± 1.67 and 0.45 ± 0.08 mg/m3, three and 22 times the exposure limit recommended by ACGIH, respectively. Average manganese was significantly higher in the welders’ blood (0.16 ± 0.02 µg/mL) than in the controls’ blood (0.04 ± 0.002 µg/mL). There were strong and significant correlations between the welding respirable particles and manganese concentration in welders’ breathing zone and blood manganese levels. Also, with each year of work experience, the manganese concentration in the welders’ blood increased by 1.5%. Conclusions: Welders are at risk of contamination with manganese. Manganese exposure reduction through more efficient ventilation systems, reducing welder’s exposure time, staff training, and appropriate respiratory protection equipment should be applied to reduce manganese exposure among welders and prevent health complications.

HBM4EU chromates study - Overall results and recommendations for the biomonitoring of occupational exposure to hexavalent chromium

Exposure to hexavalent chromium [Cr(VI)] may occur in several occupational activities, e.g., welding, Cr(VI) electroplating and other surface treatment processes. The aim of this study was to provide EU relevant data on occupational Cr(VI) exposure to support the regulatory risk assessment and decision-making. In addition, the capability and validity of different biomarkers for the assessment of Cr(VI) exposure were evaluated. The study involved nine European countries and involved 399 workers in different industry sectors with exposures to Cr(VI) such as welding, bath plating, applying or removing paint and other tasks. We also studied 203 controls to establish a background in workers with no direct exposure to Cr(VI). We applied a cross-sectional study design and used chromium in urine as the primary biomonitoring method for Cr(VI) exposure. Additionally, we studied the use of red blood cells (RBC) and exhaled breath condensate (EBC) for biomonitoring of exposure to Cr(VI). Personal measurements were used to study exposure to inhalable and respirable Cr(VI) by personal air sampling. Dermal exposure was studied by taking hand wipe samples. The highest internal exposures were observed in the use of Cr(VI) in electrolytic bath plating. In stainless steel welding the internal Cr exposure was clearly lower when compared to plating activities. We observed a high correlation between chromium urinary levels and air Cr(VI) or dermal total Cr exposure. Urinary chromium showed its value as a first approach for the assessment of total, internal exposure. Correlations between urinary chromium and Cr(VI) in EBC and Cr in RBC were low, probably due to differences in kinetics and indicating that these biomonitoring approaches may not be interchangeable but rather complementary. This study showed that occupational biomonitoring studies can be conducted successfully by multi-national collaboration and provide relevant information to support policy actions aiming to reduce occupational exposure to chemicals.

Urinary Metals as a Marker of Exposure in Men and Women in the Welding and Electrical Trades: A Canadian Cohort Study

OBJECTIVES

Men and women working in the welding trades undergo the same apprenticeship training but it is unknown whether, once in the trade, their exposures differ. Comparison of urinary metal concentrations, having adjusted for estimated airborne exposure, may provide an answer.

METHODS

Men and women were recruited to a cohort study of workers in the welding and electrical trades (the Workers Health in Apprenticeship Trades-Metal working and Electrical [WHAT-ME study]). They completed a recruitment questionnaire and further questionnaires every 6 months for up to 5 years. At each follow-up, they gave details on employment and, if welding, answered trade-specific questionnaires. Urine samples were collected by mail. Welding exposure matrices were developed to estimate metal exposures from welding process, base metal, and consumables. Urinary metal concentrations, determined by ICP-MS, were compared by trade (welding or electrical). Within welding, the relation of urinary concentrations to estimated airborne exposure was examined, with adjustment for potential confounders including sex, use of respiratory protective equipment (RPE), and time spent outdoors. Natural logarithms were taken of exposure estimates and urinary concentrations, to reduce skew. All regression analyses included creatinine concentration.

RESULTS

Urinary metal concentrations were analysed for 12 metals in 794 samples. Antimony, arsenic, lead, and mercury had a high proportion of samples with no metal detected and were not considered further. The urinary concentrations of aluminum, cadmium, chromium, cobalt, copper, manganese, nickel, and zinc were compared for welders (434 samples) and electrical workers (360). After adjustment for potential confounders, welders had higher urinary concentrations for aluminum (β = 0.13 95%CI 0.03-0.24) and chromium (β = 0.66 95%CI 0.55-0.77). Of 434 welder urines, 334 could be matched securely to detailed information about the most recent day welding. For these, an estimate of airborne exposure was made for aluminum, chromium, manganese, and nickel. Male welders were estimated to have higher airborne exposure to chromium and nickel than women welders. No difference was seen in the estimated exposures for aluminum or manganese (or total dust). Regression analyses of the relation of urinary metals to estimated exposure showed a good concordance for aluminum (β = 0.09 95%CI 0.04-0.15 (P < 0.001) and chromium (β = 0.11 95%CI 0.05-0.17 P < 0.001). The concordance for manganese and nickel was positive, but much weaker. Urinary concentrations of aluminum and nickel were somewhat lower with increasing time wearing RPE and, for chromium and nickel, with time working outdoors. Having adjusted for estimated exposure, creatinine and other confounders, male welders had lower urine concentrations of aluminum (β = -0.35 95%CI -0.51 to -0.19 P < 0.001) chromium (β = -0.38 95%CI -0.57 to -0.19 P < 0.001) and manganese (β = -0.36 95%CI -0.49 to -0.23 P < 0.001) than female welders.

CONCLUSION

Welders had higher urinary concentrations of aluminum and chromium than electrical workers. Exposure estimates of aluminum and chromium for welders were a valid representation of the airborne exposures to these metals. Although male welders were estimated to have higher exposures of chrome and nickel than female welders, the higher urinary metal concentrations in women welders is of concern, particularly for women who may conceive while in the trade.

Systematic review of biomonitoring data on occupational exposure to hexavalent chromium

Occupational exposure to hexavalent chromium (Cr(VI)) can cause serious adverse health effects such as lung cancer and irritation of the skin and airways. Although assessment of chromium (Cr) in urine is not specific for Cr(VI) exposure, the total amount of Cr in urine is the most used marker of exposure for biomonitoring of Cr(VI). The purpose of this systematic review was fourfold: (1) to assess current and recent biomonitoring levels in subjects occupationally exposed to Cr(VI), with a focus on urinary Cr levels at the end of a working week, (2) to identify variables influencing these biomonitoring levels, (3) to identify how urinary Cr levels correlate with other Cr(VI) exposure markers and (4) to identify gaps in the current research. To address these purposes, unpublished and published biomonitoring data were consulted: (i) unpublished biomonitoring data comprised urinary Cr levels (n = 3799) of workers from different industries in Belgium collected during 1998-2018, in combination with expert scores indicating jobs with Cr exposure and (ii) published biomonitoring data was extracted by conducting a systematic literature review. A linear mixed effect model was applied on the unpublished biomonitoring data, showing a decreasing time trend of 30% in urinary Cr levels. Considering the observed decreasing time trend, only articles published between January 1, 2010 and September 30, 2020 were included in the systematic literature search to assess current and recent biomonitoring levels. Twenty-five studies focusing on human biomonitoring of exposure to Cr(VI) in occupational settings were included. Overall, the results showed a decreasing time trend in urinary Cr levels and the need for more specific Cr(VI) biomarkers. Furthermore, this review indicated the importance of improved working conditions, efficient use of personal protective equipment, better exposure control and increased risk awareness to reduce Cr levels in biological matrices. Further investigation of the contribution of the different exposure routes is needed, so that better guidance on the use of control measures can be provided. In addition, this review support the call for more harmonization of human biomonitoring.

Metal enriched quasi-ultrafine particles from stainless steel gas metal arc welding induced genetic and epigenetic alterations in BEAS-2B cells

Recent evidence has supported welding fume (WF)-derived ultrafine particles (UFP) could be the driving force of their adverse health effects. However, UFP have not yet been extensively studied and are currently not included in present air quality standards/guidelines. Here, attention was focused on the underlying genetic and epigenetic mechanisms by which the quasi-UFP (Q-UFP, i.e., ≤ 0.25 μm) of the WF emitted by gas metal arc welding-stainless steel (GMAW-SS) exert their toxicity in human bronchial epithelial BEAS-2B cells. The Q-UFP under study showed a monomodal size distribution in number centered on 104.4 ± 52.3 nm and a zeta potential of -13.8 ± 0.3 mV. They were enriched in Fe > Cr > Mn > Si, and displayed a relatively high intrinsic oxidative potential. Dose-dependent activation of nuclear factor erythroid 2-related factor 2 and nuclear factor-kappa B signaling pathway, glutathione alteration, and DNA, protein and lipid oxidative damage were reported in BEAS-2B cells acutely (1.5 and 9 μg/cm², 24 h) or repeatedly (0.25 and 1.5 μg/cm², 3 × 24 h) exposed to Q-UFP (p < 0.05). Alterations of the Histone H3 acetylation were reported for any exposure (p < 0.05). Differentially regulated miRNA and mRNA indicated the activation of some critical cell signaling pathways related to oxidative stress, inflammation, and cell cycle deregulation towards apoptosis. Taken together, these results highlighted the urgent need to better evaluate the respective toxicity of the different metals and to include the Q-UFP fraction of WF in current air quality standards/guidelines relevant to the occupational settings.

Is Urinary Chromium Specific to Hexavalent Chromium Exposure in the Presence of Co-exposure to Other Chromium Compounds? A Biomonitoring Study in the Electroplating Industry

OBJECTIVES

Electroplating processes are widely used in metal industries to improve the resistance properties of manufactured metal parts. Workers in this industry are potentially exposed both to hexavalent chromium (Cr(VI)) and to other chromium compounds [mostly trivalent chromium (Cr(III))], due to the use of chromic acid baths. The goal of this study was to validate urinary chromium as a Cr(VI) exposure biomarker in the presence of exposure to other chromium compounds.

METHODS

A biomonitoring study consisted in monitoring airborne chromium exposure and urinary chromium for one working week in 93 workers from nine electroplating companies. Chromium concentrations were measured in all urinations of each volunteer for the working week. Individual airborne soluble and insoluble Cr(VI) as well as Cr(III) concentrations were measured for all of the shifts of the week. The main statistical analysis consisted in modelling, in a Bayesian framework, the pre- and post-shift urinary chromium as a function of airborne Cr(III) and airborne Cr(VI), taking into account the day of the week and the time of collection of the urines (pre- or post-shift).

RESULTS

Preliminary descriptions showed an increase in pre-shift urinary chromium during the working week. The model showed an increase in urinary chromium over the shift related to the shift-specific airborne Cr(VI) concentration as well as an increasing trend over the week and a relationship with the mean weekly Cr(VI) thought to reflect chronic exposure. Taking into account the Cr(VI) exposure, there was no evidence of an effect of Cr(III) exposure on urinary chromium. A biological limit value (BLV) was derived from the French occupational exposure limit for Cr(VI) of 1 µg m-3 and was estimated at between 1.9 and 2.6 µg g-1 creatinine for a urinary sample collected at the end of the shift on the last working day of the week.

CONCLUSIONS

In the present context of mixed exposure to Cr(III) and Cr(VI) in electroplating, this study showed that urinary chromium depended only on airborne Cr(VI) concentrations, which justifies using a BLV for assessing workers' exposure. The estimated BLV was close to the recommended French BLV, which is 1.8 µg g-1 creatinine, in the electroplating industry.

Study of Occupational Chromium, Iron, and Nickel Exposure and Amyotrophic Lateral Sclerosis in Denmark

Studies of occupational metal exposures and amyotrophic lateral sclerosis (ALS) have focused primarily on known neurotoxicants, including lead, mercury, selenium, and cadmium. However, these exposures are often co-occurring with other lesser studied metals. We conducted a population-based case-control study with the aim of assessing associations between occupational chromium, iron, and nickel exposures and risk of ALS. We identified ALS cases in Denmark from 1982 through 2013 from the Danish National Patient Registry and matched them to 100 controls based on birth year and sex. Cumulative metal exposures were estimated using job exposure matrices applied to occupational history from the Danish Pension Fund. Although mutually adjusted odds of ALS were higher in men with chromium exposures in the third quartile (aOR = 1.24; 95% CI 0.91, 1.69) and fourth quartile (aOR = 1.19; 95% CI: 0.80, 1.76) compared to those with no exposure, differences did not reach statistical significance. We also observed higher odds of ALS in women with nickel exposures in the third quartile (aOR = 2.21; 95% CI: 1.14, 4.28), but not for the fourth quartile (aOR = 0.61; 95% CI: 0.23, 1.64). Our findings do not suggest associations between occupational exposures to these metals and ALS. However, unavoidable non-differential misclassification from the use of JEMs may have masked truly increased risk.