Strategies for quantification and confirmation of multi-class polar pesticides and transformation products in water by LC–MS2 using triple quadrupole and hybrid quadrupole time-of-flight analyzers

Advanced oxidation of bio-treated incineration leachate by persulfate combined with heat, UV254 nm, and UV365 nm: Kinetics, mechanism, and toxicity

This study compared and evaluated the ultraviolet/persulfate (UV/PS) at 254 or 365 nm and heat/persulfate (heat/PS) systems for advanced treatment of biologically pre-treated incineration leachate. The UV365 nm/PS system with the highest removal reduced chemical oxygen demand (COD) by 81.7%, total organic carbon by 73.8%, NH3-N by 96.8%, total nitrogen by 47.3%, and color by 98.6% within 24 h, separately. Kinetics tests suggested that a highest concentrations of 4.8 × 10-10 M for [SO4·-]ss and 2.8 × 10-11 M for [·OH]ss were reported in UV365/PS and UV254/PS systems, respectively. Characterization of leachate organic matter species revealed that low molecular weight organic matter < 5 kDa was preferentially degraded in three systems. Ketones are relatively easily degraded by both heat/PS and UV/PS systems, whereas esters were the most recalcitrant. Three-dimensional fluorescence analysis revealed > 99% humic acid and fulvic acid removal in all three systems. In practical applications, it is crucial to consider the pH and toxicity of SR-AOPs in the treatment of bio-treated incineration leachate. Furthermore, the ecotoxicity of MBR effluent treated by the heat/PS system and UV365 nm/PS system increased, which was caused by the strong acidity exhibited in the systems. In addition, we found that PS could interfere with 3.3% of the COD's detection. The findings of this study suggest that secondary effects of PS on water quality at high doses should be investigated in future research.

Universal Method Based on Layer-by-Layer Assembly for Aptamer-Based Sensors for Small-Molecule Detection

Development of a fast and accurate pesticide analysis system is a challenging task, as a large amount of commonly used pesticide has negative effects on humans' health. Detection of pesticide residues is crucial for food safety management and environmental protection. Aptamers─short single-stranded oligonucleotides (RNA or DNA) selected by aptamer selection method SELEX─can selectively bind to their target pesticide molecules with high affinity. Thus, in the present study, we developed an electrochemical biosensor based on aptamers to detect the commonly used pesticide, glyphosate. Carbon fibers were used as the platform to assemble polyelectrolyte layers with the incorporated aptamers selectively binding with glyphosate molecules for electrochemical detection. The best limit of detection of 0.3 μM was achieved at open-circuit potential measurements, which is comparable to the current need in detection of glyphosate. The developed method can be implemented into existing systems for the determination of pesticides on farms to control residual concentrations of glyphosate in soil and water.

Characterization of non-volatile organic contaminants in coking wastewater using non-target screening: Dominance of nitrogen, sulfur, and oxygen-containing compounds in biological effluents

While abundant volatile compounds (VOCs) have been identified in coking wastewater, the structures and occurrence of non-volatile organic compounds (non-VOCs) have remained unknown. In this study, 3966 non-VOCs belonging to 24 groups were tentatively identified for the first time in wastewater from four biological coking wastewater treatment systems in northern China using a non-target screening technique. A total of 227 compounds with CHNO, CHO, CHOS, and CHNOS elemental compositions were assigned with level 2 identification confidence, and 19 of them were confirmed with authentic standards, with 9-methyl-9H-carbazole-3-carbaldehyde (1706.3-2032.7 μg/L) and 3-Indolyl acetic acid monomethyl terephthalate (773.7-1449.9 μg/L) as the top two compounds in the influents, and 9-methyl-9H-carbazole-3-carbaldehyde (31.8-130.1 μg/L) and monomethyl terephthalate (13.9-196.6 μg/L) as the top two in the effluents. The four groups of substances accounted for 93.4% and 71.5% of the total responses of tentatively identified compounds in the influents and biological effluents, respectively, and were estimated to contribute 32.3-48.9% of the chemical oxygen demand in the biological effluents. In comparison with those in the influent, abundant S-containing compounds (CHOS and CHNOS, 35.2% of the total responses) were observed in the biological effluents, suggesting their highly bio-refractory characteristics. The advanced treatment process using synchronized oxidation-adsorption could almost completely remove the CHOS and CHNOS compounds from the biological effluents.

Routine analysis of pesticides in foodstuffs: Emerging ambient ionization mass spectrometry as an alternative strategy to be on your radar

Pesticides residues in foodstuffs are longstanding of great concern to consumers and governments, thus reliable evaluation techniques for these residues are necessary to ensure food safety. Emerging ambient ionization mass spectrometry (AIMS), a transformative technology in the field of analytical chemistry, is becoming a promising and solid evaluation technology due to its advantages of direct, real-time and in-situ ionization on samples without complex pretreatments. To provide useful guidance on the evaluation techniques in the field of food safety, we offered a comprehensive review on the AIMS technology and introduced their novel applications for the analysis of residual pesticides in foodstuffs under different testing scenarios (i.e., quantitative, screening, imaging, high-throughput detection and rapid on-site analysis). Meanwhile, the creative combination of AIMS with high-resolution mass analyzer (e.g., orbitrap and time-of-flight) was fundamentally mentioned based on recent studies about the detection and evaluation of multi-residual pesticides between 2015 and 2021. Finally, the technical challenges and prospects associated with AIMS operation in food industry were discussed.

Screening of organic chemicals in surface water of the North River by high resolution mass spectrometry

Wide use of various chemicals has resulted in water pollution, which has become a global environmental concern. So far limited information is available on what chemicals in our water. Here we investigated the occurrence and profiles of organic chemicals in the North River, South China by applying non-target screening analysis with high resolution mass spectrometry. A total of 402 organic chemicals belonging to eleven categories were identified in the North River, with notable presence of industrial chemicals, pharmaceuticals and pesticides. Among these detected chemicals, over half of the tentatively identified compounds were rarely reported in the surface water, with a few compounds, e.g., sisomicin, simeton, 2-methyl-4,6-dinitrophenol, xanthurenic acid and indole-3-carboxylic acid that have never been documented in the North River before, while the metabolites like 4-acetamidoantipyrine were also observed. The maximum concentration of the identified chemicals in the North River was above 300 ng/L (Sulfamonomethoxine). Principle component analysis results of the obtained dataset showed significant seasonal distribution, which could be linked to variations in wastewater discharge, river dilution and anthropogenic activities such as pesticide spray. Agricultural activities in the upper reaches led to detection of various pesticides in the river basin, especially in the wet season. The findings from this study demonstrated the widespread presence of chemicals in our waterway, and further retrospective analysis would reveal more information about chemicals of emerging concern.

Evaluation of Sample Preparation Methods for Non-Target Screening of Organic Micropollutants in Urban Waters Using High-Resolution Mass Spectrometry

Non-target screening (NTS) has gained interest in recent years for environmental monitoring purposes because it enables the analysis of a large number of pollutants without predefined lists of molecules. However, sample preparation methods are diverse, and few have been systematically compared in terms of the amount and relevance of the information obtained by subsequent NTS analysis. The goal of this work was to compare a large number of sample extraction methods for the unknown screening of urban waters. Various phases were tested for the solid-phase extraction of micropollutants from these waters. The evaluation of the different phases was assessed by statistical analysis based on the number of detected molecules, their range, and physicochemical properties (molecular weight, standard recoveries, polarity, and optical properties). Though each cartridge provided its own advantages, a multilayer cartridge combining several phases gathered more information in one single extraction by benefiting from the specificity of each one of its layers.

Characterizing changes of dissolved organic matter composition with the use of distinct feeds in recirculating aquaculture systems via high-resolution mass spectrometry

Recirculating aquaculture systems (RAS) are a new alternative to traditional aquaculture approaches, allowing full control over the fish production conditions, while reducing the water demand. The reduction of water exchange leads to an accumulation of dissolved organic matter (DOM) that can have potential effects on water quality, fish welfare and system performance. Despite the growing awareness of DOM in aquaculture, scarce scientific information exists for understanding the composition and transformation of DOM in RAS. In this study, a non-targeted approach using ultra-performance liquid chromatography coupled to a hybrid quadrupole-time of flight mass spectrometer (UPLC-QTOF-MS) was used to characterize compositional changes of low molecular weight (LMW) DOM in RAS, when operated under two different feed types. A total of 1823 chemicals were identified and the majority of those contained a CHON chemical group in their structure. Changes in the composition of LMW-DOM in RAS waters were observed when the standard feed was switched to RAS feed. The DOM with the use of standard feed, consisted mainly of lignin/CRAM-like, CHO and CHOS chemical groups, while the DOM that used RAS feed, was mainly composed by unsaturated hydrocarbon, CHNO and CHNOS chemical groups. The Bray-Curtis dissimilarity cluster demonstrated differences in the composition of DOM from RAS and was associated to the type of feed used. When the RAS feed was used, the Kendrick mass defect plots of -CH₂- homologous units in the pump-sump (after the water treatment) showed a high removal capacity for CHNO, CHNOS and halogenated chemicals with high Kendrick mass defect, KMD > 0.7. To our knowledge, this is the first report of LMW-DOM characterization of RAS by high-resolution mass spectrometry (HRMS).

Improved fully automated method for the determination of medium to highly polar pesticides in surface and groundwater and application in two distinct agriculture-impacted areas

Water is an essential resource for all living organisms. The continuous and increasing use of pesticides in agricultural and urban activities results in the pollution of water resources and represents an environmental risk. To control and reduce pesticide pollution, reliable multi-residue methods for the detection of these compounds in water are needed. In this context, the present work aimed at providing an analytical method for the simultaneous determination of trace levels of 51 target pesticides in water and applying it to the investigation of the target pesticides in two agriculture-impacted areas of interest. The method developed, based on an isotopic dilution approach and on-line solid-phase extraction-liquid chromatography-tandem mass spectrometry, is fast, simple, and to a large extent automated, and allows the analysis of most of the target compounds in compliance with European regulations. Application of the method to the analysis of selected water samples collected at the lowest stretches of the two largest river basins of Catalonia (NE Spain), Llobregat and Ter, revealed the presence of a wide suite of pesticides in the Llobregat basin, some of them at concentrations above the water quality standards (irgarol and dichlorvos) or the acceptable method detection limits (methiocarb, imidacloprid, and thiacloprid), and much cleaner waters in the Ter River basin. Risk assessment of the pesticide concentrations measured in the Llobregat River indicated high risk due to the presence of irgarol, dichlorvos, methiocarb, azinphos ethyl, imidacloprid, and diflufenican (hazard quotient (HQ) values>10), and moderate potential risk in the Ter River, associated to the occurrence of bentazone and irgarol (HQ > 1).

Economically feasible strategy for confirmation of pharmaceuticals in hospital effluent using screening analysis

The contamination of aquatic systems by pharmaceuticals has received considerable attention in recent decades, because these substances are increasingly detected in the environment. This is due to the abundant use of pharmaceuticals by the population and, consequently, their constant introduction into aquatic systems through domestic, industrial, and hospital wastewaters. Hospital effluents have highly complex compositions and present potential toxicity towards the environment. In this work, a screening methodology was developed to evaluate the occurrence of pharmaceutical products in hospital wastewater, using a viable, easy, and economical strategy employing commercial pharmaceutical compounds for screening analysis. Six samplings of hospital wastewater were carried out monthly (from winter until summer). The samples were filtered and pre-concentrated/extracted using solid phase extraction (SPE). The pharmaceuticals screening procedure required the construction of two databases, one for each ionization mode (positive and negative), which contained information that allowed the identification of the presence of these pharmaceuticals in the studied samples. Commercial pharmaceutical compounds were used as analytical standards. Based on this strategy and, using liquid chromatography coupled to high resolution mass spectrometry, it was possible to screen 110 pharmaceuticals and, from these, to confirm the presence of 38 pharmaceuticals in analyzed samples. These results indicate the analytes that should be taken into account in the further development of quantitative methods for pharmaceutical analysis.

Detection of Aflatoxins in Different Matrices and Food-Chain Positions

Aflatoxins, produced mainly by filamentous fungi Aspergillus flavus and Aspergillus parasiticus, are one of the most carcinogenic compounds that have adverse health effects on both humans and animals consuming contaminated food and feed, respectively. Aflatoxin B1 (AFB1) and aflatoxin B2 (AFB2) as well as aflatoxin G1(AFG1) and aflatoxin G2 (AFG2) occur in the contaminated foods and feed. In the case of dairy ruminants, after the consumption of feed contaminated with aflatoxins, aflatoxin metabolites [aflatoxin M1 (AFM1) and aflatoxin M2 (AFM2)] may appear in milk. Because of the health risk and the official maximum limits of aflatoxins, there is a need for application of fast and accurate testing methods. At present, there are several analytical methods applied in practice for determination of aflatoxins. The aim of this review is to provide a guide that summarizes worldwide aflatoxin regulations and analytical methods for determination of aflatoxins in different food and feed matrices, that helps in the decision to choose the most appropriate method that meets the practical requirements of fast and sensitive control of their contamination. Analytical options are outlined from the simplest and fastest methods with the smallest instrument requirements, through separation methods, to the latest hyphenated techniques.

Optimized hidden target screening for very polar molecules in surface waters including a compound database inquiry

Highly polar trace organic compounds, which are persistent, mobile, and toxic (PMT) or are very persistent and very mobile (vPvM) in the aquatic environment, may pose a risk to surface water, ground water, and drinking water supplies. Despite the advances in liquid chromatography-mass spectrometry, there often exists an analytical blind spot when it comes to very polar chemicals. This study seeks to make a broad polarity range analytically accessible by means of serially coupling reversed-phase liquid chromatography (RPLC) and hydrophilic interaction liquid chromatography (HILIC) to high-resolution mass spectrometry (HRMS). Moreover, a workflow is presented using optimized data processing of nontarget screening (NTS) data and subsequently generating candidate lists for the identification of very polar molecules via an open-access NTS platform and implemented compound database. First, key input parameters and filters of the so-called feature extraction algorithms were identified, and numerical performance indicators were defined to systematically optimize the data processing method. Second, all features from the very polar HILIC elution window were uploaded to the STOFF-IDENT database as part of the FOR-IDENT open-access NTS platform, which contains additional physicochemical information, and the features matched with potential compounds by their accurate mass. The hit list was filtered for compounds with a negative log D value, indicating that they were (very) polar. For instance, 46 features were assigned to 64 candidate compounds originating from a set of 33 samples from the Isar river in Germany. Three PMT candidates (e.g., guanylurea, melamine, and 1,3-dimethylimidazolidin-2-one) were illustratively validated using the respective reference standards. In conclusion, these findings demonstrate that polarity-extended chromatography reproducibly retards and separates (very) polar compounds from surface waters. These findings further indicate that a transparent and robust data processing workflow for nontarget screening data is available for addressing new (very) polar substances in the aqueous environment.

Entry of biocides and their transformation products into groundwater via urban stormwater infiltration systems

Biocides are, inter alia, applied as preservatives on facades to prevent the growth of microorganisms. Their incomplete mineralization results in new compounds, so-called transformation products (TPs). Rain causes that both applied biocides and their TPs leach from facades with stormwater into the urban aquatic environment. This study is the first to investigate the introduction of the biocides Diuron, Terbutryn, and Octylisothiazolinone (OIT) and their TPs into the groundwater via urban stormwater infiltration systems. In this study, the TPs of these biocides were created by laboratory photolysis and elucidated using LC-HRMS. The results were then used to analyze TPs by LC-MS/MS in stormwater and groundwater samples, which were taken from an urban swale-trench system and from groundwater wells upgradient and downgradient of the infiltration system. A sprinkling experiment was conducted to evaluate facades as a contamination source. Biodegradation tests were conducted to determine bio-persistence of biocides and their TPs. Fourteen TPs were identified under laboratory photolysis. TP-186, TP-210, and TP-256 of Terbutryn were hitherto unknown. Nine TPs were qualitatively detected in environmental water samples. Parent compounds, TP-219 of Diuron and TP-212, TP-214, and TP-226 of Terbutryn were detected at a maximum concentration of 140 ng L^-1 during stormwater events. Concentrations in groundwater were considerably below German drinking water limits, but were higher in groundwater samples downgradient from the investigated swale-trench system than in those collected upgradient. Neither the biocides nor most of their TPs were readily biodegradable under simulated surface water conditions. The results show that entry of biocides and their TPs into groundwater is caused by infiltration of urban stormwater.

Mass spectrometric strategies for the investigation of biomarkers of illicit drug use in wastewater

The analysis of illicit drugs in urban wastewater is the basis of wastewater-based epidemiology (WBE), and has received much scientific attention because the concentrations measured can be used as a new non-intrusive tool to provide evidence-based and real-time estimates of community-wide drug consumption. Moreover, WBE allows monitoring patterns and spatial and temporal trends of drug use. Although information and expertise from other disciplines is required to refine and effectively apply WBE, analytical chemistry is the fundamental driver in this field. The use of advanced analytical techniques, commonly based on combined chromatography-mass spectrometry, is mandatory because the very low analyte concentration and the complexity of samples (raw wastewater) make quantification and identification/confirmation of illicit drug biomarkers (IDBs) troublesome. We review the most-recent literature available (mostly from the last 5 years) on the determination of IDBs in wastewater with particular emphasis on the different analytical strategies applied. The predominance of liquid chromatography coupled to tandem mass spectrometry to quantify target IDBs and the essence to produce reliable and comparable results is illustrated. Accordingly, the importance to perform inter-laboratory exercises and the need to analyze appropriate quality controls in each sample sequence is highlighted. Other crucial steps in WBE, such as sample collection and sample pre-treatment, are briefly and carefully discussed. The article further focuses on the potential of high-resolution mass spectrometry. Different approaches for target and non-target analysis are discussed, and the interest to perform experiments under laboratory-controlled conditions, as a complementary tool to investigate related compounds (e.g., minor metabolites and/or transformation products in wastewater) is treated. The article ends up with the trends and future perspectives in this field from the authors' point of view. © 2016 Wiley Periodicals, Inc. Mass Spec Rev 37:258-280, 2018.

Development of an online SPE-UHPLC-MS/MS method for the multiresidue analysis of the 17 compounds from the EU "Watch list"

During the last decades, the quality of aquatic ecosystems has been threatened by increasing levels of pollutions, caused by the discharge of man-made chemicals, both via accidental release of pollutants as well as a consequence of the constant outflow of inadequately treated wastewater effluents. For this reason, the European Union is updating its legislations with the aim of limiting the release of emerging contaminants. The Commission Implementing Decision (EU) 2015/495 published in March 2015 drafts a "Watch list" of compounds to be monitored Europe-wide. In this study, a methodology based on online solid-phase extraction (SPE) ultra-high-performance liquid chromatography coupled to a triple-quadrupole mass spectrometer (UHPLC-MS/MS) was developed for the simultaneous determination of the 17 compounds listed therein. The proposed method offers advantages over already available methods, such as versatility (all 17 compounds can be analyzed simultaneously), shorter time required for analysis, robustness, and sensitivity. The employment of online sample preparation minimized sample manipulation and reduced dramatically the sample volume needed and time required, dramatically the sample volume needed and time required, thus making the analysis fast and reliable. The method was successfully validated in surface water and influent and effluent wastewater. Limits of detection ranged from sub- to low-nanogram per liter levels, in compliance with the EU limits, with the only exception of EE2. Graphical abstract Schematic of the workflow for the analysis of the Watch list compounds.

Suspect screening of micropollutants and their transformation products in advanced wastewater treatment

Transformation products (TPs) of organic micropollutants are still rarely considered in monitoring of wastewater and aquatic environments. For example, occurrence data of ozonated TPs in full-scale wastewater systems is largely lacking. In this study, the efficiency of a suspect screening strategy including 245 previously reported compounds and their TPs was evaluated for assessing the occurrence of different compound classes and their ozonated TPs in wastewater samples collected at different steps of an advanced treatment process including ozonation. After applying blank subtraction and filtering by mass accuracy (5ppm tolerance), peak height (minimum 1000 counts) and isotopic pattern score (≥80%) 189 of the 245 compounds were detected. A decrease in relative concentration levels was observed for parent compounds in wastewater after ozonation and after a subsequent biological treatment process, while formation of tentative TPs after ozonation accompanied by subsequent degradation in a following biological treatment step was found. Plausibility of structural assignments for tentatively identified TPs could be successfully tested by using relative retention time information as comparison criteria. Overall, the screening approach was fast and successful and can be expanded to other compound classes and TPs where reference standards are not readily available.

Occurrence of illicit drugs in water and wastewater and their removal during wastewater treatment

This review critically evaluates the types and concentrations of key illicit drugs (cocaine, amphetamines, cannabinoids, opioids and their metabolites) found in wastewater, surface water and drinking water sources worldwide and what is known on the effectiveness of wastewater treatment in removing such compounds. It is also important to amass information on the trends in specific drug use as well as the sources of such compounds that enter the environment and we review current international knowledge on this. There are regional differences in the types and quantities of illicit drug consumption and this is reflected in the quantities detected in water. Generally, the levels of illicit drugs in wastewater effluents are lower than in raw influent, indicating that the majority of compounds can be at least partially removed by conventional treatment processes such as activated sludge or trickling filters. However, the literature also indicates that it is too simplistic to assume non-detection equates to drug removal and/or mitigation of associated risks, as there is evidence that some compounds may avoid detection via inadequate sampling and/or analysis protocols, or through conversion to transformation products. Partitioning of drugs from the water to the solids fraction (sludge/biosolids) may also simply shift the potential risk burden to a different environmental compartment and the review found no information on drug stability and persistence in biosolids. Generally speaking, activated sludge-type processes appear to offer better removal efficacy across a range of substances, but the lack of detail in many studies makes it difficult to comment on the most effective process configurations and operations. There is also a paucity of information on the removal effectiveness of alternative treatment processes. Research is also required on natural removal processes in both water and sediments that may over time facilitate further removal of these compounds in receiving environments.

Facilitating high resolution mass spectrometry data processing for screening of environmental water samples: An evaluation of two deconvolution tools

A screening approach was applied to influent and effluent wastewater samples. After injection in a LC-LTQ-Orbitrap, data analysis was performed using two deconvolution tools, MsXelerator (modules MPeaks and MS Compare) and Sieve 2.1. The outputs were searched incorporating an in-house database of >200 pharmaceuticals and illicit drugs or ChemSpider. This hidden target screening approach led to the detection of numerous compounds including the illicit drug cocaine and its metabolite benzoylecgonine and the pharmaceuticals carbamazepine, gemfibrozil and losartan. The compounds found using both approaches were combined, and isotopic pattern and retention time prediction were used to filter out false positives. The remaining potential positives were reanalysed in MS/MS mode and their product ions were compared with literature and/or mass spectral libraries. The inclusion of the chemical database ChemSpider led to the tentative identification of several metabolites, including paraxanthine, theobromine, theophylline and carboxylosartan, as well as the pharmaceutical phenazone. The first three of these compounds are isomers and they were subsequently distinguished based on their product ions and predicted retention times. This work has shown that the use deconvolution tools facilitates non-target screening and enables the identification of a higher number of compounds.

Identification of markers of cancer in urban sewage through the use of a suspect screening approach

The administration of anticancer drugs during chemotherapy treatments has increased considerably in recent years, and based on the growing incidence of cancer worldwide there is a foreseen increase in their use over the coming years. Many anticancer drugs are not removed by conventional wastewater treatment plants (WWTPs) and can therefore reach the aquatic environment and potentially threaten aquatic life. The objective of this work was to apply a suspect screening methodology to detect chemotherapy and radiotherapy drugs and their related compounds such metabolites and/or biomarkers in wastewater. The use of logical pre-determined criteria to refine the suspect list down to a relatively small number of relevant compounds greatly improved the efficiency of the analysis. Mass accuracy, isotopic patterns and predicted retention time were used to tentatively identify the suspects. Successful identification of cancer-related suspects included two antineoplastic hormones, two X-ray contrast agents and a pyrrolizidine alkaloid related to an herbal medicine. This is the first time that a suspect screening paradigm has been successfully applied to the identification of pharmaceuticals and biomarkers related to chemotherapy in wastewater.

Identification of Anthropogenic Compounds in Urban Environments and Evaluation of Automated Methods for Reading Fragmentation-A Case of River Water

A workflow based on liquid chromatography/high-resolution mass spectrometry (LC/HR-MS) was applied for the identification of compounds in urban environments. Substances extracted by solid-phase extraction from river water were wholly analyzed by LC/HR-MS without any purification. Fragmentation in collision-induced dissociation was manually studied for the 20 most intense ions in positive- and negative-ion electrospray ionization with accurate mass determination at a resolution of 100,000. Sixteen anthropogenic compounds in the extract were identified and confirmed using standard reference reagents. These compounds consisted of pharmaceuticals, surfactants, flame retardants, and industrial intermediates. The majority of the compounds are common in our daily life. In the identification process, two automated methods, MAGMa and MetFrag/MetFusion, for reading fragmentation were evaluated for the sixteen compounds. Although automated methods could be used to retrieve the correct molecular structures in most cases, they could not always be promoted to the top rank. Automated methods have yet to be a complete solution for identifying chemical compounds, but will considerably reduce the burden for humans in reading fragmentation.

Sampling the Body Odor of Primates: Cotton Swabs Sample Semivolatiles Rather Than Volatiles

We assessed the suitability of a frequently used sampling method employing cotton swabs for collecting animal body odor for gas chromatography-mass spectrometry (GC-MS) analysis of volatile organic compounds (VOCs). Our method validation showed that both sampling material and sampling protocols affect the outcome of the analyses. Thus, among the tested protocols swabs of pure viscose baked before use and extracted with hexane had the least blank interferences in GC-MS analysis. Most critical for the recovery of VOCs was the handling time: the significant recovery losses of volatiles experienced with this sampling procedure suggest that a rapid processing of such samples is required. In a second part, we used swab sampling to sample the body odor of rhesus macaques (Macaca mulatta), which lack scent glands. First results after GC-MS analysis of the samples collected from these nonhuman primates emphasize that proper analytical performance is an indispensable prerequisite for successful automated data evaluation of the complex GC-MS profiles. Moreover, the retention times and the nature of the identified chemical compounds in our samples suggest that the use of swabs is generally more appropriate for collecting semivolatile rather than VOCs.

Benzotriazole and 5-methylbenzotriazole in recycled water, surface water and dishwashing detergents from Perth, Western Australia: analytical method development and application

A simplified and sensitive liquid chromatography mass spectrometry (LC-MS) method without requiring sample pre-concentration was successfully developed for detecting the occurrence of ultra-low (ng L(-1)) concentrations of benzotriazole (BTri), and its derivative 5-methyl benzotriazole (5-MeBT) in various Western Australian environmental water samples. The method detection limit was 2 ng L(-1), providing similar detection limits to other more process intensive methods where pre-concentration using solid phase extraction (SPE) was employed. The method was used to assess the occurrence of BTri and 5-MeBT in wastewater and surface water samples. Over a period of 12 months, BTri and 5-MeBT concentrations in secondary treated wastewater were measured, with the highest BTri and 5-MeBT concentrations observed during winter months at 78 ng L(-1) and 21 ng L(-1), respectively. The method was also used to assess the removal efficiency of BTri and 5-MeBT through an advanced water recycling plant (AWRP). While BTri was more persistent than 5-MeBT, both compounds were removed from the AWRP to <10 ng L(-1) (BTri) and <2 ng L(-1) (5-MeBT), with reverse osmosis (RO) providing the most effective treatment process for their removal.

Rapid analysis and identification of multi-class mycotoxins in Morinda officinalis by UFLC-ESI-MS/MS

Simultaneous quantification and identification of multi-class mycotoxins in Morinda officinalis by DAS-UFLC-MS/MS.

Current state-of-the-art of nontargeted metabolomics based on liquid chromatography-mass spectrometry with special emphasis in clinical applications

Metabolomics, as a part of systems biology, has been widely applied in different fields of life science by studying the endogenous metabolites. The development and applications of liquid chromatography (LC) coupled with high resolution mass spectrometry (MS) greatly improve the achievable data quality in non-targeted metabolic profiling. However, there are still some emerging challenges to be covered in LC-MS based metabolomics. Here, recent approaches about sample collection and preparation, instrumental analysis, and data handling of LC-MS based metabolomics are summarized, especially in the analysis of clinical samples. Emphasis is put on the improvement of analytical techniques including the combination of different LC columns, isotope coded derivatization methods, pseudo-targeted LC-MS method, new data analysis algorithms and structural identification of important metabolites.

Mass spectrometric analysis of pharmaceutical adulterants in products labeled as botanical dietary supplements or herbal remedies: a review

The increased availability and use of botanical dietary supplements and herbal remedies among consumers has been accompanied by an increased frequency of adulteration of these products with synthetic pharmaceuticals. Unscrupulous producers may add drugs and analogues of various classes, such as phosphodiesterase type 5 (PDE-5) inhibitors, weight loss, hypoglycemic, antihypertensive and anti-inflammatory agents, or anabolic steroids, to develop or intensify biological effects of dietary supplements or herbal remedies. The presence of such adulterated products in the marketplace is a worldwide problem and their consumption poses health risks to consumers. Analytical methods that allow rapid and reliable testing of dietary supplements for the presence of synthetic drugs are needed to address such fraudulent practices. Mass spectrometry (MS) and hyphenated techniques such as liquid chromatography-mass spectrometry (LC-MS) and gas chromatography-mass spectrometry (GC-MS) have become primary tools in this endeavor. The present review critically assesses the role and summarizes the applications of MS in the analysis of pharmaceutical adulterants in botanical dietary supplements and herbal remedies. The uses of MS techniques in detection, confirmation, and quantification of known pharmaceutical adulterants as well as in screening for and structure elucidation of unexpected adulterants and novel designer drugs are discussed.

Rapid and highly accurate detection of steryl glycosides by ultraperformance liquid chromatography-quadrupole time-of-flight mass spectrometry (UPLC-Q-TOF-MS)

This study describes the development and validation of a fast, accurate, and precise UPLC-Q-TOF-MS method for the analysis of steryl glycosides (SGs). The best combination of separation and sensitivity was obtained with a methanol/water gradient and formic acid as additive, using electrospray ionization (ESI). SGs were detected almost exclusively as sodiated adducts, allowing identification of the intact molecule, including the sugar moiety. The TOF-MS system offered high mass accuracy (1.3 ppm), providing a valuable tool for SG identification. The method was used to quantify single SG species in oat bran and whole wheat, and it was demonstrated that reliable quantification requires accounting for the matrix effect, which may reduce the SG signal by up to 50% in some samples. The level of matrix effect also depends on food matrices with various SG contents, indicating that it should be individually considered for each sample.

Comparison of triple quadrupole mass spectrometry and Orbitrap high-resolution mass spectrometry in ultrahigh performance liquid chromatography for the determination of veterinary drugs in sewage: benefits and drawbacks

This paper presents a comparison of triple quadrupole tandem mass spectrometry (MS/MS) and Orbitrap high-resolution mass spectrometry (HRMS) combined to ultrahigh performance liquid chromatography for the determination of glucocorticoids and polyether ionophores in sewage, in order to show the major benefits and drawbacks for each mass spectrometry analyser. Overall, HRMS measurements have enhanced performance in terms of confirmatory capabilities than MS/MS measurements. Moreover, similar limits of quantification, limits of detection, linear range and repeatability for glucocorticoids with both the MS/MS and HRMS methods were compared, but in the case of polyether ionophores, slightly better limits of detection and limits of quantification were obtained with the HRMS method because of the high sensitivity obtained when diagnostic ions are used for quantification instead of selected reaction monitoring transitions for these compounds. The two methods have been applied to the analysis of several influent and effluent sewage samples from sewage treatment plants located in the Tarragona region (Catalonia, Spain), showing an excellent correlation between the two methods.

Strategies to characterize polar organic contamination in wastewater: exploring the capability of high resolution mass spectrometry

Wastewater effluents contain a multitude of organic contaminants and transformation products, which cannot be captured by target analysis alone. High accuracy, high resolution mass spectrometric data were explored with novel untargeted data processing approaches (enviMass, nontarget, and RMassBank) to complement an extensive target analysis in initial "all in one" measurements. On average 1.2% of the detected peaks from 10 Swiss wastewater treatment plant samples were assigned to target compounds, with 376 reference standards available. Corrosion inhibitors, artificial sweeteners, and pharmaceuticals exhibited the highest concentrations. After blank and noise subtraction, 70% of the peaks remained and were grouped into components; 20% of these components had adduct and/or isotope information available. An intensity-based prioritization revealed that only 4 targets were among the top 30 most intense peaks (negative mode), while 15 of these peaks contained sulfur. Of the 26 nontarget peaks, 7 were tentatively identified via suspect screening for sulfur-containing surfactants and one peak was identified and confirmed as 1,3-benzothiazole-2-sulfonate, an oxidation product of a vulcanization accelerator. High accuracy, high resolution data combined with tailor-made nontarget processing methods (all available online) provided vital information for the identification of a wider range of heteroatom-containing compounds in the environment.

Identification of novel micropollutants in wastewater by a combination of suspect and nontarget screening

To detect site-specific, suspected and formerly unknown contaminants in a wastewater treatment plant effluent, we established a screening procedure based on liquid chromatography-high resolution mass spectrometry (LC-HRMS) with stepwise identification schemes. Based on automated substructure searches a list of 2160 suspected site-specific and documented water contaminants was reduced to those amenable to LC-HRMS. After searching chromatograms for exact masses of suspects, presumably false positive detections were stepwise excluded by retention time prediction, the evaluation of isotope patterns, ionization behavior, and HRMS/MS spectra. In nontarget analysis, peaks for identification were selected based on distinctive isotope patterns and intensity. The stepwise identification of nontarget compounds was automated by a plausibility check of molecular formulas using the Seven Golden Rules, an exclusion of compounds with presumably low commercial importance and an automated HRMS/MS evaluation. Six suspected and five nontarget chemicals were identified, of which two have not been previously reported as environmental pollutants.

Quadrupole-time-of-flight mass spectrometry screening for synthetic cannabinoids in herbal blends

'Legal highs' are novel substances which are intended to elicit a psychoactive response. They are sold from 'head shops', the internet and from street suppliers and may be possessed without legal restriction. Several months ago, a 19-year-old woman came searching for medical treatment as she had health problems caused by smoking legal highs. The substances were sold as herbal blends in plastic bags under four different labels. In this work, samples of these herbal blends have been analysed to investigate the presence of psychoactive substances without any reference standard being available at the laboratory. A screening strategy for a large number of synthetic and natural cannabinoids has been applied based on the use of ultra-high pressure liquid chromatography coupled to quadrupole-time of flight mass spectrometry (UHPLC-QTOF MS) under MS(E) mode. A customized home-made database containing literature-based exact masses for parent and product ions of around 200 synthetic and natural cannabinoids was compiled. The presence of the (de)protonated molecule measured at its accurate mass was evaluated in the samples. When a peak was detected, collision-induced dissociation fragments and characteristic isotopic ions were also evaluated and used for tentative identification. After this tentative identification, four synthetic cannabinoids (JWH-081, JWH-250, JWH-203 and JWH-019) were unequivocally confirmed by subsequent acquisition of reference standards. The presence in the herbal blends of these synthetic cannabinoids might explain the psychotic and catatonic symptoms observed in the patient, as JWH compounds could act as potent agonists of CB1 and CB2 receptors located in the Limbic System and Basal ganglia of the human brain.

Identification and profiling of targeted oxidized linoleic acid metabolites in rat plasma by quadrupole time-of-flight mass spectrometry

Linoleic acid (LA) and LA-esters are the precursors of LA hydroperoxides, which are readily converted to 9- and 13-hydroxy-​octadecadienoic acid (HODE) and 9- and 13-oxo-​octadecadienoic acid (oxo ODE) metabolites in vivo. These four oxidized LA metabolites (OXLAMs) have been implicated in a variety of pathological conditions. Therefore, their accurate measurement may provide mechanistic insights into disease pathogenesis. Here we present a novel quadrupole time-of-flight mass spectrometry (Q-TOFMS) method for quantitation and identification of target OXLAMs in rat plasma. In this method, the esterified OXLAMs were base-hydrolyzed and followed by liquid-liquid extraction. Quantitative analyses were based on one-point standard addition with isotope dilution. The Q-TOFMS data of target metabolites were acquired and multiple reaction monitoring extracted-ion chromatograms were generated post-acquisition with a 10 ppm extraction window. The limit of quantitation was 9.7-35.9 nmol/L depending on the metabolite. The method was reproducible with a coefficient of variation of <18.5%. Mean concentrations of target metabolites in rat plasma were 57.8, 123.2, 218.1 and 57.8 nmol/L for 9-HODE, 13-HODE, 9-oxoODE and 13-oxoODE, respectively. Plasma levels of total OXLAMs were 456.9 nmol/L, which correlated well with published concentrations obtained by gas chromatography/mass spectrometry (GC/MS). The concentrations were also obtained utilizing a standard addition curve approach. The calibration curves were linear with correlation coefficients of >0.991. Concentrations of 9-HODE, 13-HODE, 9-oxoODE and 13-oxoODE were 84.0, 138.6, 263.0 and 69.5 nmol/L, respectively, which were consistent with the results obtained from one-point standard addition. Target metabolites were simultaneously characterized based on the accurate Q-TOFMS data. This is the first study of secondary LA metabolites using Q-TOFMS. Published 2012. This article is a U.S. Government work and is in the public domain in the USA.

Determination of 136 pharmaceuticals and hormones in sewage sludge using quick, easy, cheap, effective, rugged and safe extraction followed by analysis with liquid chromatography-time-of-flight-mass spectrometry

The aim of this study was to develop an analytical method for the analysis of a wide range of hormonal steroids and pharmaceutical compounds in sewage sludge. Thus, 136 substances were selected, including 119 pharmaceuticals and 17 hormonal steroids. An innovative sample preparation procedure based on the quick, easy, cheap, effective, rugged and safe (QuEChERS) method was developed. The analysis was then performed using liquid chromatography coupled with time-of-flight mass spectrometry. This analytical procedure was validated by evaluating the specificity, quadratic curve fitting, recovery, reproducibility and limits of detection and quantification. The method allows the analysis of the majority of the target compounds with limits of detection ranging from 1 ng/g to 2500 ng/g, depending on the nature of the substance. The protocol was then successfully applied to various types of sludge (limed, digested, dried, liquid and composted) collected in several sewage works in France. Among the target compounds, 34 were quantified at levels up to 6000 ng/g. Among the most commonly detected pharmaceuticals were the antiemetic domperidone (mean concentration 769 ng/g) and the antiepileptic lamotrigine (mean concentration 31 ng/g) whose presence had, to our knowledge, never been shown in sludge.

Use of time-of-flight mass spectrometry for large screening of organic pollutants in surface waters and soils from a rice production area in Colombia

The irrigate district of Usosaldaña, an important agricultural area in Colombia mainly devoted to rice crop production, is subjected to an intensive use of pesticides. Monitoring these compounds is necessary to know the impact of phytosanitary products in the different environmental compartments. In this work, surface water and soil samples from different sites of this area have been analyzed by applying an analytical methodology for large screening based on the use of time-of-flight mass spectrometry (TOF MS) hyphenated to liquid chromatography (LC) and gas chromatography (GC). Several pesticides were detected and unequivocally identified, such as the herbicides atrazine, diuron or clomazone. Some of their main metabolites and/or transformation products (TPs) like deethylatrazine (DEA), deisopropylatrazine (DIA) and 3,4-dichloroaniline were also identified in the samples. Among fungicides, carbendazim, azoxystrobin, propiconazole and epoxiconazole were the most frequently detected. Insecticides such as thiacloprid, or p,p'-DDT metabolites (p,p'-DDD and p,p'-DDE) were also found. Thanks to the accurate-mass full-spectrum acquisition in TOF MS it was feasible to widen the number of compounds to be investigated to other families of contaminants. This allowed the detection of emerging contaminants, such as the antioxidant 3,5-di-tertbutyl-4-hydroxy-toluene (BHT), its metabolite 3,5-di-tert-butyl-4-hydroxy-benzaldehyde (BHT-CHO), or the solar filter benzophenone, among others.

Multiresidue analysis of 88 polar organic micropollutants in ground, surface and wastewater using online mixed-bed multilayer solid-phase extraction coupled to high performance liquid chromatography-tandem mass spectrometry

An automated multiresidue method consisting of an online solid-phase extraction step coupled to a high performance liquid chromatography-tandem mass spectrometer (online-SPE-HPLC-MS/MS method) was developed for the determination of 88 polar organic micropollutants with a broad range of physicochemical properties (logD(OW) (pH 7): -4.2 to 4.2). Based on theoretical considerations, a single mixed-bed multilayer cartridge containing four different extraction materials was composed for the automated enrichment of water samples. This allowed the simultaneous analysis of pesticides, biocides, pharmaceuticals, corrosion inhibitors, many of their transformation products, and the artificial sweetener sucralose in three matrices groundwater, surface water, and wastewater. Limits of quantification (LOQs) were in the environmentally relevant concentration range of 0.1-87 ng/L for groundwater and surface water, and 1.5-206 ng/L for wastewater. The majority of the compounds could be quantified below 10 ng/L in groundwater (82%) and surface water (80%) and below 100 ng/L in wastewater (80%). Relative recoveries were largely between 80 and 120%. Intraday and inter-day precision, expressed as relative standard deviation, were generally better than 10% and 20%, respectively. 50 isotope labeled internal standards were used for quantification and accordingly, relative recoveries as well as intraday and inter-day precision were better for compounds with corresponding internal standard. The applicability of this method was shown during a sampling campaign at a riverbank filtration site for drinking water production with travel times of up to 5 days. 36 substances of all compound classes investigated could be found in concentrations between 0.1 and 600 ng/L. The results revealed the persistence of carbamazepine and sucralose in the groundwater aquifer as well as degradation of the metamizole metabolite 4-acetamidoantipyrine.

Degradation of terbuthylazine, difenoconazole and pendimethalin pesticides by selected fungi cultures

Contamination of waters by xenobiotic compounds such as pesticides presents a serious environmental problem with substantial levels of pesticides now contaminating European water resources. The aim of this work was to evaluate the ability of the fungi Fusarium oxysporum, Aspergillus oryzae, Lentinula edodes, Penicillium brevicompactum and Lecanicillium saksenae, for the biodegradation of the pesticides terbuthylazine, difenoconazole and pendimethalin in batch liquid cultures. These pesticides are common soil and water contaminants and terbuthylazine is considered the most persistent triazine herbicide in surface environments. P. brevicompactum and L. saksenae were achieved by enrichment, isolation and screening of fungi capable to metabolize the pesticides studied. The isolates were obtained from two pesticide-primed materials (soil and biomixture). Despite the relatively high persistence of terbuthylazine, the results obtained in this work showed that the fungi species studied have a high capability of biotransformation of this xenobiotic, comparatively the results obtained in other similar studies. The highest removal percentage of terbuthylazine from liquid medium was achieved with A. oryzae (~80%), although the major biodegradation has been reached with P. brevicompactum. The higher ability of P. brevicompactum to metabolize terbuthylazine was presumably acquired through chronic exposure to contamination with the herbicide. L. saksenae could remove 99.5% of the available pendimethalin in batch liquid cultures. L. edodes proved to be a fungus with a high potential for biodegradation of pesticides, especially difenoconazole and pendimethalin. Furthermore, the metabolite desethyl-terbuthylazine was detected in L. edodes liquid culture medium, indicating terbuthylazine biodegradation by this fungus. The fungi strains investigated could prove to be valuable as active pesticide-degrading microorganisms, increasing the efficiency of biopurification systems containing wastewaters contaminated with the xenobiotics studied or compounds with similar intrinsic characteristics.

Multi-residue analytical methods for the determination of pesticides and PPCPs in water by LC-MS/MS: a review

Residues of pesticides, pharmaceutical and personal care products (PPCPs) are contaminants of world-wide concern. Consequently, there is a growing need to develop reliable analytical methods, which enable rapid, sensitive and selective determination of these pollutants in environmental samples, at trace levels. In this paper, a review of the liquid chromatography-tandem mass spectrometry (LC-MS/MS) based methods for the determination of pesticides and PPCPs in the environment is presented. Advanced aspects of current LC-MS/MS methodology, including sample preparation and matrix effects, are discussed.

Current use of high-resolution mass spectrometry in the environmental sciences

During the last two decades, mass spectrometry (MS) has been increasingly used in the environmental sciences with the objective of investigating the presence of organic pollutants. MS has been widely coupled with chromatographic techniques, both gas chromatography (GC) and liquid chromatography (LC), because of their complementary nature when facing a broad range of organic pollutants of different polarity and volatility. A clear trend has been observed, from the very popular GC-MS with a single quadrupole mass analyser, to tandem mass spectrometry (MS-MS) and, more recently, high-resolution mass spectrometry (HRMS). For years GC has been coupled to HR magnetic sector instruments, mostly for dioxin analysis, although in the last ten years there has been growing interest in HRMS with time-of-flight (TOF) and Orbitrap mass analyzers, especially in LC-MS analysis. The increasing interest in the use of HRMS in the environmental sciences is because of its suitability for both targeted and untargeted analysis, owing to its sensitivity in full-scan acquisition mode and high mass accuracy. With the same instrument one can perform a variety of tasks: pre- and post-target analysis, retrospective analysis, discovery of metabolite and transformation products, and non-target analysis. All these functions are relevant to the environmental sciences, in which the analyst encounters thousands of different organic contaminants. Thus, wide-scope screening of environmental samples is one of the main applications of HRMS. This paper is a critical review of current use of HRMS in the environmental sciences. Needless to say, it is not the intention of the authors to summarise all contributions of HRMS in this field, as in classic descriptive reviews, but to give an overview of the main characteristics of HRMS, its strong potential in environmental mass spectrometry and the trends observed over the last few years. Most of the literature has been acquired since 2005, coinciding with the growth and popularity of HRMS in this field, with a few exceptions that deserve to be mentioned because of their relevance.

A new approach to data evaluation in the non-target screening of organic trace substances in water analysis

Non-target screening via high performance liquid chromatography-mass spectrometry (HPLC-MS) has gained increasingly in importance for monitoring organic trace substances in water resources targeted for the production of drinking water. In this article a new approach for evaluating the data from non-target HPLC-MS screening in water is introduced and its advantages are demonstrated using the supply of drinking water as an example. The crucial difference between this and other approaches is the comparison of samples based on compounds (features) determined by their full scan data. In so doing, we take advantage of the temporal, spatial, or process-based relationships among the samples by applying the set operators, UNION, INTERSECT, and COMPLEMENT to the features of each sample. This approach regards all compounds, detectable by the used analytical method. That is the fundamental meaning of non-target screening, which includes all analytical information from the applied technique for further data evaluation. In the given example, in just one step, all detected features (1729) of a landfill leachate sample could be examined for their relevant influences on water purification respectively drinking water. This study shows that 1721 out of 1729 features were not relevant for the water purification. Only eight features could be determined in the untreated water and three of them were found in the final drinking water after ozonation. In so doing, it was possible to identify 1-adamantylamine as contamination of the landfill in the drinking water at a concentration in the range of 20 ng L(-1). To support the identification of relevant compounds and their transformation products, the DAIOS database (Database-Assisted Identification of Organic Substances) was used. This database concept includes some functions such as product ion search to increase the efficiency of the database query after the screening. To identify related transformation products the database function "transformation tree" was used.