Responses of riverbed sediment bacteria to heavy metals: Integrated evaluation based on bacterial density, activity and community structure under well-controlled sequencing batch incubation conditions

Unveiling the prevalence of metal resistance genes and their associations with antibiotic resistance genes in heavy metal-contaminated rivers

Heavy metals can drive antibiotic resistance through co-selection mechanisms. Current knowledge predominantly focuses on relationships between metal resistance genes (MRGs) and antibiotic resistance genes (ARGs) at the river reach scale. It remains unclear the links between MRGs and ARGs at the large river basin scale, as does the role of MRG-ARG colocalization in resistance dissemination. This study employed metagenomics to investigate the prevalence of MRGs in the Xiangjiang River, a historically heavy metal-contaminated river, and their connections with ARGs by combining resistome profiling with colocalization analyses. Results revealed the significant prevalence of MRGs in the river compared to nationwide rivers, but it showed weak correlations with metal concentrations in either water or sediment. The prevalence of MRGs in water was weakly driven by abiotic parameters, but was strongly influenced by microbial composition. The proportion of water MRGs attributable to sewage sources was tightly positively correlated with MRG abundances, suggesting the significant contribution of external waste input. Plasmid-originated MRGs were more abundant in water, while chromosomal MRGs dominated in sediment, indicating medium-specific transfer dynamics. The profile of MRGs were strongly correlated with that of ARGs in both media, encompassing several clinically high-risk ARGs. However, MRG-ARG colocalization events were rarely detected (eight instances in total), consistent with low frequencies in nationwide rivers (3.5 % in sediment; 2.0 % in water), implying their limited roles in resistance dissemination. Overall, the findings enhance our understanding of riverine metal resistome and its associations with antibiotic resistome, while emphasize the rare presence of MRG-ARG colocalization in riverine environments.

Response and roles of algal organic matter under copper stress: Spectral and mass spectrometry analysis

Eutrophication leads to various environmental issues, including pollution caused by the production of algal organic matter (AOM). Algae typically respond to environmental changes (e.g., light, temperature, copper [Cu(II)] concentration and pH) by regulating the production and release of different substances, thereby causing unpredictable effects on water quality. We explored the characteristics of AOM and the response mechanisms of algae under Cu(II) stress in the study, using fluorescence spectrum and high-resolution mass spectrometry (HRMS) analysis. The growth of Microcystis aeruginosa was inhibited under Cu(II) stress which was irreversible at Cu(II) concentration ≥ 2 μmol/L. Tryptophan- and humic-like fluorophores were important constituents of extracellular organic matter (EOM), and their contents increased with the addition of Cu(II), indicating that Cu(II) stimulates the production of tryptophan- and humic-like compounds. In addition, fulvic acid-like compounds in EOM were the main components binding to Cu(II) and were overproduced by algae under Cu(II) stress. It was found by HRMS at the molecular level that the formula numbers of EOM generally increased over inhibition time. Under 1 μmol/L Cu(II) stress, nitrogenous compounds (CHON formulae) were the primary AOM, accounting for 37.3-52.0 %. In addition, algae release a large amount of condensed aromatic structures to balance Cu(II) stress. This study provides a molecular-level analysis to explain the variation trends and response mechanisms of algae under various Cu(II) concentrations. The research methods are helpful for utilizing multiple advanced analysis methods to study algae growth and AOM release.

Environmental health hazards of untreated livestock wastewater: potential risks and future perspectives

Due to technological and economic limitations, waste products such as sewage and manure generated in livestock farming lack comprehensive scientific and centralized treatment. This leads to the exposure of various contaminants in livestock wastewater, posing potential risks to both the ecological environment and human health. This review evaluates the environmental and physical health risks posed by common pollutants in livestock wastewater and outlines future treatment methods to mitigate these risks. Residual wastes in livestock wastewater, including pathogenic bacteria and parasites surviving after epidemics or diseases on various farms, along with antibiotics, organic wastes, and heavy metals from farming activities, contribute to environmental damage and pose risks to human health. As the livestock industry's development increasingly impacts society's future negatively, addressing the issue of residual wastes in livestock wastewater discharge becomes imperative. Ongoing advancements in wastewater treatment systems are consistently updating and refining practices to effectively minimize waste exposure at the discharge source, mitigating risks to environmental ecology and human health. This review not only summarizes the "potential risks of livestock wastewater" but also explores "the prospects for the development of wastewater treatment technologies" based on current reports. It offers valuable insights to support the long-term and healthy development of the livestock industry and contribute to the sustainable development of the ecological environment.

Combining dredging with modified zeolite thin-layer capping to control nitrogen release from eutrophic lake sediment

Dredging is widely used to control internal sediment nitrogen (N) pollution during eutrophic lake restoration. However, the effectiveness of dredging cannot be maintained for long periods during seasonal temperature variations. This study used modified zeolite (MZ) as a thin-layer capping material to enhance dredging efficiency during a year-long field sediment core incubation period. Our results showed that dredging alone more effectively reduced pore water N, N flux, and sediment N content than MZ capping but showed more dramatic changes during the warm seasons. The N flux in dredged sediment in summer was 1.8 and 2.5 times that in spring and autumn, respectively, indicating a drastic N regeneration process in the short term. In contrast, the combination method reduced the extra 10% pore water N, 22% N flux, and 8% sediment organic N content compared with dredging alone and maintained high stability during seasonal changes. The results indicated that the addition of MZ to the surface of dredged sediment not only enhanced the control effect of dredging by its adsorption capacity but may also smooth the N regeneration process via successive accumulation (in the channel of the material) and activation of bacteria for months, which was evidenced by the variation in microbial diversity in the MZ treatment. As a result, the combination of dredging with modified zeolite simultaneously enhanced the efficiency and stability of the single dredging method in controlling sediment N content and its release, exhibiting great prospects for long-term application in eutrophic lakes with severe pollution from internal N loading.

Livestock and poultry farm wastewater treatment and its valorization for generating value-added products: Recent updates and way forward

Livestock and poultry wastewater poses a potent risk factor for environmental pollution accelerating disease load and premature deaths. It is characterized by high chemical oxygen demand, biological oxygen demand, suspended solids, heavy metals, pathogens, and antibiotics, among other contaminants. These contaminants have a negative impact on the quality of soil, groundwater, and air, and is a potential hazard to human health. Depending on the specific characteristics of wastewater, such as the type and concentration of pollutants present; several physical, chemical and biological strategies have been developed for wastewater treatment. This review aims at providing comprehensive overview of the profiling of livestock wastewater from the dairy, swine and poultry sub-sectors along with the biological (annamox and genetically modified bacteria) and physico-chemical treatment methodologies, and valorisation for the generation of value-added products such as bioplastics, biofertilizers, biohydrogen and microalgal-microbial fuel cells. Additionally, future perspectives for efficient and sustainable wastewater treatment are contemplated.

Ecological risk assessment and identification of the distinct microbial groups in heavy metal-polluted river sediments

To assess the health of river ecosystems, it is essential to quantify the ecological risk of heavy metals in river sediments and the structure of microbial communities. As important tributaries of the Tuo River in the upper reaches of the Yangtze River, the Mianyuan River and the Shiting River, are closely related to the economic development and human daily life in the region. This study assessed the ecological risks of heavy-metal-polluted river sediments, the heavy-metal-driven bacterial communities were revealed, and the relationships between the ecological risks and the identical bacterial communities were discussed. The Cd content was significantly greater than the environmental background value, leading to a serious pollution and very high ecological risk at the confluence of the two rivers and the upper reaches of the Mianyuan River. Microbial community analysis showed that Rhodobacter, Nocardioides, Sphingomonas, and Pseudarthrobacter were the dominant bacterial genera in the sediments of the Shiting River. However, the dominant bacterial genera in the Mianyuan River were Kouleothrix, Dechloromonas, Gaiella, Pedomicrobium, and Hyphomicrobium. Mantel test results showed (r = 0.5977, P = 0.005) that the Cd, As, Zn, Pb, Cr, and Cu were important factors that influenced differences in the distribution of sediment bacterial communities Mianyuan and Shiting rivers. A correlation heatmap showed that heavy metals were negatively correlated for most bacterial communities, but some bacterial communities were tolerant and showed a positive correlation. Overall, the microbial structure of the river sediments showed a diverse spatial distribution due to the influence of heavy metals. The results will improve the understanding of rivers contaminated by heavy metals and provide theoretical support for conservation and in situ ecological restoration of river ecosystems.

Applying EEM-PARAFAC combined with moving-window 2DCOS and structural equation modeling to characterize binding properties of Cu (II) with DOM from different sources in an urbanized river

Dissolved organic matter (DOM) in aquatic environment distinctly affects the behavior and fate of heavy metals via complexation, while the interfacial mechanisms and processes are still lacking in detail. Here, Cu (II) binding characteristics of DOM originated from hilly (NDOM), rural (RDOM) and urban (UDOM) regions in an urbanized river was explored by fluorescence excitation-emission matrix spectroscopy (EEM) combined with principal component coefficients, parallel factor analyses (PARAFAC), moving-window two-dimensional correlation spectroscopy (MW2DCOS) and structural equation modeling (SEM). Eight components were extracted from the titrants through EEM-PARAFAC, i.e., phenol-like substance (C1), tyrosine-like substance (C2), visible tryptophan-like substance (C3), ultraviolet tryptophan-like substance (C4), recent biological production (C5), wastewater-derived organic matter (C6), microbial humic-like substance (C7) and fulvic-like substance (C8). Interestingly, NDOM only contained C1, C3, C5 and C8, while nearly all components were found in RDOM (except for C2) and UDOM (except for C4). The f value of C1 (1.239) in NDOM was much higher than those in RDOM (0.134) and UDOM (0.115), so was of C8. It indicated that phenol-like and fulvic-like derived from autochthonous sources exhibited great binding ratios in the complexation with Cu (II). Moreover, C3 and C5 from UDOM exhibited higher f values (0.591 and 1.983) than those from NDOM and RDOM, suggesting that Cu (II) has a great binding capacity on protein-like from domestic and industrial wastewater. The MW2DCOS revealed that phenol-like and protein-like in NDOM and RDOM were essential for the binding of 160 μmol L^-1 Cu (II), whereas fulvic-like in NDOM and UDOM could react significantly with 10 μmol L^-1 Cu (II). Based on SEM, Cu (II) concentration had a negative direct effect on the fluorescence intensity of C7 or C8, whereas it showed an indirect positive effect on C7 or C8 through influencing C5, so was C6. It suggested that Cu (II) showed an indirect positive effect on the C8. This study might present a further comprehend of the environmental behaviors of Cu (II) in rivers.

Foliar spray of silicon nanoparticles improved the growth and minimized cadmium (Cd) in wheat under combined Cd and water-limited stress

The effects of foliar supply of silicon nanoparticles (Si-NPs) on growth, physiology, and cadmium (Cd) uptake by wheat (Triticum aestivum L.) were examined in different soil moisture levels. Seeds were sown in soil containing excess Cd (7.67 mg kg^-1) and Si-NPs were applied through foliar dressing with various levels (0, 25, 50, 100 mg L^-1) at different time intervals during growth period. Initially, all pots were irrigated with normal moisture level (70% water-holding capacity) and two moisture levels (35%, 70% WHC) were initiated after 6 weeks of plant growth for remaining growth duration and harvesting was done after 124 days of sowing. The results demonstrated the lowest plant growth, yield, and chlorophyll concentrations while the highest oxidative stress and Cd concentrations in plant tissues in water-stressed control (35% WHC) followed by normal control (75% WHC). Si-NPs enhanced the growth, photosynthesis, leaf defense system, and Si concentrations in tissues while minimized the Cd in wheat parts particularly in grains either soil normal or water-stressed conditions. Of the foliar spray, 100 mg L^-1 of Si-NPs showed the best results with respect to growth, Cd and Si uptake by plants, and soil post-harvest bioavailable Cd irrespective of soil water levels. In grain, Cd concentration was below threshold limit (0.2 mg kg^-1) for cereals in 100-mg kg^-1 Si-NPs treatment irrespective of soil water levels. Si-NPs foliar dressing under Cd and water-limited stress might be an effective strategy in increasing growth, yield, and decreasing Cd concentration in wheat grains under experimental conditions. Thus, foliar dressing of Si-NPs minimized the Cd risk in food crops and NPs entry to surroundings, which might be possible after harvesting of crops in soil-applied NPs.

Response of fungi-microalgae pellets to copper regulation in the removal of sulfonamides and release of dissolved organic matters

Both sulfonamides (SAs) and copper (Cu(II)) were frequently detected together in swine wastewater. In this study, the regulation of Cu(II) on SAs adsorption and release of dissolved organic matters (DOMs) by fungi-microalgae pellets (FM-pellets) were investigated. Aspergillus oryzae pellets were prepared for combination with Chlorella vulgaris and the optimal conditions were at agitation speed of 130 rpm, fungi to microalgae ratio of 10:1 and the combined time of 3 h with the highest combination efficiency of 98.65%. The results showed that adsorption was the main mechanism for SAs removal. FM-pellets exhibited a high SAs adsorption potential within 6 h, and the adsorption capacity of sulfamethazine (SMZ), sulfamonomethoxine (SMM) and sulfamethoxazole (SMX) was 1.07, 0.94 and 1.67 mg/g, respectively. Furthermore, the removal of SMX, SMZ and SMM was greatly promoted from 62.31% to 85.21%, 58.71-67.91% and 64.17-80.31%, respectively, under the presence of 2 mg/L Cu(II) through ion exchange and adsorption bridging. DOMs were analyzed by the parallel factor (PARAFAC) to demonstrate the response mechanism of FM-pellets to Cu(II). Protein-like substances and NADH in DOMs released by FM-pellets formed complexes with Cu(II) to alleviate the damage on the organism. These findings provide new insights into the mechanism and response of Cu(II) in the removal of SAs by FM-pellets.

Unveil the role of dissolved and sedimentary metal(loid)s on bacterial communities and metal resistance genes (MRGs) in an urban river of the Qinghai-Tibet Plateau

Though metal resistance genes (MRGs) are of global concern in aquatic ecosystems, the underlying factors responsible for MRGs dissemination, especially in urban rivers on the vulnerable Qinghai-Tibet Plateau, are rarely known. Here, we collected 64 samples including water and sediments during the wet and dry seasons and effluents from six wastewater treatment plants (WWTPs) during the dry season and measured 50 metal(loid)s, 60 bacterial phyla, and 259 MRGs. We observed the distinct difference of metal(loid)s, bacterial communities, and MRGs between water and sediments and the great seasonal changes in metal(loid)s and bacterial communities instead of MRGs. Thirty-one metal(loid)s were detectable in the water, with relatively low concentrations and no significant effects on the planktonic bacterial communities and MRGs. Interestingly, the WWTPs effluent partially promoted the prevalence of dissolved metal(loid)s, bacterial communities, and MRGs along the river. In the sediments, the average concentrations of 17 metal(loid)s exceeded their corresponding background levels in this region and strongly influenced the bacterial communities and the MRGs. Sedimentary Hg and Cd, mainly sourced from the intensive animal husbandry, were the major pollutants causing ecological risks and largely shaped their corresponding resistomes. Moreover, we found that bacterial communities predominantly determined the variation of MRGs in both water and sediments. Metagenome-assembled genomes further reveals the widespread co-occurrence of MRGs and antibiotic resistance genes (ARGs) in MRG hosts. Our study highlighted the concern of effluents discharged from WWTPs and emphasized the importance of controlling the anthropogenic inputs of sedimentary metal(loid)s in the plateau river ecosystems.

Study of solidification and stabilization of heavy metals by passivators in heavy metal-contaminated soil

In this study, the indoor constant temperature culture experiment was used to explore the mutual transformation of different forms of heavy metals. Appropriate types of passivating agents were screened, and the optimal addition amount was determined to realize the solidification and stabilization of heavy metals. The results showed that the dissolved copper (Cu), zinc (Zn), and lead (Pb) contents of the zeolite-treated soil decreased to the lowest. They were 219, 819, and 40 g/kg, respectively, which were 31.2, 6.5, and 38.5% lower than no passivating agent added (the control); the dissolved Cu, Zn, and Pb content gradually increased with the extension of time; 5% zeolite (Z4) treatment had the highest average content of Cu, Zn, and Pb in the residue state, respectively, 24, 48, and 19 mg/kg; and at the end of the test, the residual Zn content of Z4 treatment reached 50 mg/kg, which was 72.4% higher than that of the control. A comprehensive analysis of the changes in the dissolved state of the four heavy metals in the soil shows that Cu, Zn, cadmium (Cd), and Pb treated with zeolite have the best effect, followed by sepiolite, and finally palygorskite. Therefore, 5% zeolite can be used for the passivation restoration of heavy metals Cu, Zn, Cd, and Pb in the soil.

Accumulation capability for cesium differs among bacterial species: A comprehensive study using bacteria isolated from freshwater and coastal sediment

The fate and behavior of radioactive cesium (Cs) in the water environment are of great concern. The involvement of bacteria regarding their accumulation capability for this element is the most fundamental factor that needs to be clarified even for exploring the interactions between many environmental factors that involve together in governing the transport and distribution of Cs. As the first systematical study that aimed to evaluate the accumulation capability of environmental bacteria for Cs, bacteria in the sediment of a freshwater reservoir and coastal water environment were isolated and multiplied for contact experiment with Cs under different temperature conditions (5, 25, and 35 °C). The accumulation concentration of Cs in bacteria from freshwater sediment varied in 3.95 × 10^-6 to 5.68 × 10^-4ng-Cs/cell, and that from coastal sediment in 1.52 × 10^-6 to 7.41 × 10^-4ng-Cs/cell, indicating obvious differences among bacterial species. Bacteria of coastal sediment possessed higher accumulation capability for Cs than bacteria from freshwater sediment, and temperature dependency was confirmed for bacteria from coastal sediment. The findings of this study have great reference value for better understanding and controlling the fate and behavior of radioactive Cs associated with bacteria in the water environment.

Phytoremediation of cadmium-contaminated sediment using Hydrilla verticillata and Elodea canadensis harbor two same keystone rhizobacteria Pedosphaeraceae and Parasegetibacter

Aquatic macrophytes have been widely employed for in-situ phytoremediation of cadmium (Cd) polluted sediments. But, little is known about the responses of rhizosphere bacteria and their interspecific interactions to phytoremediation. In this study, the α-diversity, community composition, co-occurrence network and keystone species of sediment bacteria in rhizosphere zones of two typical macrophytes, Hydrilla verticillata and Elodea canadensis, were investigated using 16S rRNA gene high-throughput sequencing. The results showed that after fifty days of phytoremediation, a group of specialized sediment bacteria were assembled in the rhizosphere zones closely associated with different host macrophytes. Rhizosphere micro-environments, i.e., the increases of redox potential and organic matter and the decreases of pH, nitrogen and phosphorus, reduced bacterial α-diversity through niche-based species-sorting process, which in turn reduced interspecific mutualistic relationships. But meanwhile, benefiting from the nutrients supplied from macrophyte roots, more bacterial species survived in the highly Cd-contaminated sediments (50 mg kg^-1). In addition, the co-occurrence network revealed that both macrophytes harbored two same keystone bacteria with the high betweenness centrality values, including the family Pedosphaeraceae (genus_unclassified) and genus Parasegetibacter. Their relative abundances were up to 28-fold and 25-fold higher than other keystone species, respectively. Furthermore, these two keystone bacteria were metabolic generalists with vital ecological functions, which posed significant potentials for promoting plant growth and tolerating Cd bio-toxicity. Therefore, the identified keystone rhizobacteria, Pedosphaeraceae and Parasegetibacter, would be potential microbial modulations applied for the future optimization of phytoremediation in Cd-contaminated sediment.

Evaluation of growth and biochemical responses of freshwater microalgae Chlorella vulgaris due to exposure and uptake of sulfonamides and copper

Sulfonamides (SAs) and heavy metals are frequently detected together in livestock wastewater. In this study, evaluations regarding their potentially adverse effects on microalgae and according removals were investigated. Results showed that the growth of C. vulgaris was inhibited by SAs and Cu. There was an obvious recovery period in photosynthetic activity (Fv/Fm), indicating that the damage to the photosystem of microalgae was reversible. The co-existence of SAs and Cu significantly affected the biochemical characteristics, including the activities of antioxidant enzyme and the contents of photosynthetic pigments, proteins and polysaccharides. The addition of Cu obviously promoted the removal efficiencies of SMZ, SMX and SMM, which might be ascribed to the bridging effect of Cu in the bioadsorption of SAs. This study is conducive to understand the changes in the biochemical responses of microalgae under the combined impacts of SAs and Cu, and provides a new insight for the simultaneous removals.

Stabilization of lead in polluted sediment based on an eco-friendly amendment strategy: Microenvironment response mechanism

Stabilization is the most important remediation mechanisms for sediment polluted heavy metals. However, little research has been done on the identification of microenvironmental response and internal correlation, as well as synergistic mechanisms during heavy metal remediation. This study aims to investigate the inner response mechanisms of microenvironment after the lead (Pb) are gradually stabilized in sediment. An eco-friendly amendment strategy which firstly used 100% biodegradable sophorolipids (SOP) to modify chlorapatite (ClAP) for the fabrication of SOP@nClAP was applied in this study. The stabilization efficiency of Pb was significantly improved by SOP@nClAP compared with ClAP. Most importantly, the high-throughput sequencing showed that the dominant species in the sediment changed with the stabilization of Pb. The decrease of Proteobacteria and increase of Firmicutes, especially the Sedimentibacter within the phylum Firmicute directly suggested that large amounts of Pb were stabilized. This research is not only devoted to stabilize Pb in sediment by eco-friendly amendment strategy, but also keep a watchful eye on microenvironment response mechanisms during the Pb stabilization in sediment. Therefore, this study lays a foundation for the future application of more heavy metal amendment strategies in the sediment environment and improves the possibility of large-scale site amendment.

In situ control of internal nutrient loading and fluxes in the confluence area of an eutrophic lake with combined P inactivation agents and modified zeolite

In this study, a field in situ inactivation experiment was carried out to control the confluence area sediment nutrient loading and fluxes using modified zeolite (MZ) in combination with poly aluminum chloride (PAC) and lanthanum-modified bentonite (LMB). The results indicated that PAC + MZ and LMB + MZ can reduce 76% and 75% of the P flux and 20% and 27% of the N flux, respectively. These results are based on a comparison with a control treatment over four months under the influence of external loading. However, their control efficiency on sediment nutrient fluxes decreased largely during the summertime algal blooming season. Both of the treatments lost their N control efficiency at this time. In contrast, LMB + MZ can still reduce 27% of the P flux compared to the control treatment. Surface sediment extractable ammonium increased substantially from the PAC + MZ and LMB + MZ treatments, which is 1.8 and 2.2 times more than the extractable ammonium in the control sediment after 210 days of remediation. The P fractionation analysis indicated that, in the PAC + MZ and LMB + MZ, both NaOH-rP and HCl-P increased greatly at a rate of 1.5 and 3.9 times, respectively, compared to the control sediment. PAC + MZ and LMB + MZ reduced the mobile P by 21% and 43%, respectively compared with the control sediment after 210 days of remediation. Bacteria richness and diversity in the PAC + MZ and LMB + MZ treatments had no obvious distinction when compared with the control treatment after 210 days of remediation but had a transient decrease in the LMB + MZ and recovered as it returned back to the same level found in control after 60 days. The results indicated that the control efficiency of nutrient fluxes in sediment might vary with types of inactivation agents and dosing methods and can be largely reduced under the influence of external loading and algal blooms.

Novel PVDF-PVP Hollow Fiber Membrane Augmented with TiO2 Nanoparticles: Preparation, Characterization and Application for Copper Removal from Leachate

High proportion of copper has become a global challenge owing to its negative impact on the environment and public health complications. The present study focuses on the fabrication of a polyvinylidene fluoride (PVDF)-polyvinyl pyrrolidone (PVP) fiber membrane incorporated with varying loading (0, 0.5, 1.0, 1.5, and 2.0 wt%) of titanium dioxide (TiO₂) nanoparticles via phase inversion technique to achieve hydrophilicity along with high selectivity for copper removal. The developed fibers were characterized based on scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX), permeability, porosity, zeta potential, and contact angle. The improved membrane (with 1.0 wt% TiO₂) concentration recorded the maximum flux (223 L/m²·h) and copper rejection (98.18%). Similarly, 1.0 wt% concentration of TiO₂ nanoparticles made the membrane matrix more hydrophilic with the least contact angle of 50.01°. The maximum copper adsorption capacity of 69.68 mg/g was attained at 1.0 wt% TiO₂ concentration. The experimental data of adsorption capacity were best fitted to the Freundlich isotherm model with R² value of 0.99573. The hybrid membrane developed in this study has considerably eliminated copper from leachate and the concentration of copper in the permeate was substantially reduced to 0.044 mg/L, which is below standard discharge threshold.

The legacy of trace metal deposition from historical anthropogenic river management: A regional driver of offshore sedimentary microbial diversity

River management, both modern and historical, have dramatically modified offshore environments. While numerous studies have described the modern impacts, very few have evaluated the legacies remaining from hundreds of years ago. Herein, we show trace metal enrichment in the surface sediment of the abandoned Yellow River Delta, hypothesized to be associated with ancient river management. Essentially, anthropogenic modification caused the river to shift, creating a 12.4×10³ km² area with elevated trace metals; characterized by clear metal deposition gradients. Geographical factors related to the ancient river mouth had the most significant influences on Zn (explained by distance to the river mouth, DTM) and Cd (DTM and sediment salinity), while the sediment absorptive capacity was associated with the reallocation of Cu (clay, silt, and iron), Ni (clay and iron), and Pb (silt and iron). Trace metal legacies showed stronger influences on prokaryotic diversity than on micro-eukaryotic diversity, with the former best described by changes in rare, rather than dominant families and classes, and explainable by an "overlapping micro-niche" model. The ancient river's legacies provide evidence of longer-term human disturbance over hundreds of years; as its impacts on associated benthic microbiomes have led to lessons for modern-day waterway management of benthic ecosystems.

A Review of Current and Emerging Approaches for Water Pollution Monitoring

The aquatic ecosystem is continuously threatened by the infiltration and discharge of anthropogenic wastewaters. This issue requires the unending improvement of monitoring systems to become more comprehensive and specific to targeted pollutants. This review intended to elucidate the overall aspects explored by researchers in developing better water pollution monitoring tools in recent years. The discussion is encircled around three main elements that have been extensively used as the basis for the development of monitoring methods, namely the dissolved compounds, bacterial indicator, and nucleic acids. The latest technologies applied in wastewater and surface water mapped from these key players were reviewed and categorized into physicochemical and compound characterizations, biomonitoring, and molecular approaches in taxonomical and functional analyses. Overall, researchers are continuously rallying to enhance the detection of causal source for water pollution through either conventional or mostly advanced approaches focusing on spectrometry, high-throughput sequencing, and flow cytometry technology among others. From this review’s perspective, each pollution evaluation technology has its own advantages and it would be beneficial for several aspects of pollutants assessments to be combined and established as a complementary package for better aquatic environmental management in the long run.

Functional potential and assembly of microbes from sediments in a lake bay and adjoining river ecosystem for polycyclic aromatic hydrocarbon biodegradation

Lake and adjoining river ecosystems are ecologically and economically valuable and are heavily threatened by anthropogenic activities. Determining the inherent capacity of ecosystems for polycyclic aromatic hydrocarbon (PAH) biodegradation can help quantify environmental impacts on the functioning of ecosystems, especially on that of the microbial community. Here, PAH biodegradation potential was compared between sediments collected from a lake bay (LS) and an adjoining river (RS) ecosystem. Microbial community composition, function, and their co-occurrence patterns were also explored. In the RS, the biodegradation rates (K_D ) of pyrene or PAH were almost two orders of magnitude higher than those in the LS. Sediment functional community structure and network interactions were dramatically different between the LS and RS. Although PAH degradation genes (p450aro, quinoline, and qorl) were detected in the LS, the community activity of these genes needed to be biostimulated for accelerated bioremediation. In contrast, functional communities in the RS were capable of spontaneous natural attenuation of PAH. The degradation of PAH in the RS also required coordinated response of the complex functional community. Taken together, elucidating functions and network interactions in sediment microbial communities and their responses to environmental changes are very important for the bioremediation of anthropogenic toxic contaminants.

Nutrient and heavy metal removal from piggery wastewater and CH4 enrichment in biogas based on microalgae cultivation technology under different initial inoculum concentration

Three microalgae-based treatment technologies were applied for removing nutrients in piggery wastewater and CO₂ in biogas simultaneously. Chlorella vulgaris (C. vulgaris), Scenedesmus obliquus (S. obliquus), and Neochloris oleoabundans (N. oleoabundans) were selected for mono-cultivation or co-cultivation with fungi or activated sludge. The effects of initial inoculum concentration (low of 62.06 ± 6.23 mg/L, medium of 121 ± 9.34 mg/L, and high of 180 ± 12.78 mg/L) of microalgae/algal symbiont on the pollutant removal efficiency were evaluated. The results showed that cultivation of S. obliquus with activated sludge had a relatively high CO₂ and nutrients removal efficiency at a medium concentration of initial inoculum. The highest removal efficiency of total organic carbon, total nitrogen, and total phosphorus in piggery wastewater was 87.29%, 87.26%, and 90.17% by co-cultivation of S. obliquus with activated sludge. The highest CO₂ removal of 64.28% could be achieved under co-cultivation of S. obliquus and fungi at medium initial inoculum concentrations. This work will be helpful to promote the study of microalgae-based biogas upgrading and piggery wastewater purification. PRACTITIONER POINTS: Nutrient and CO₂ were efficiently removed in moderate microalgal initial inoculum. Scenedesmus obliquus-activated sludge cultivation achieved the highest nutrient removal. Co-cultivation of S. obliquus and fungi showed the highest CO₂ removal. Zinc was removed efficiently in high microalgal initial inoculum. Chlorella vulgaris/S. obliquus-activated sludge performed economically.

Response of sediment bacterial communities to the drainage of wastewater from aquaculture ponds in different seasons

Bacterial communities play an important role in diffuse sediment pollution in aquaculture farms. Previous studies have revealed the short-term influence of wastewater drainage on the bacterial communities but the seasonal response of the sediment bacterial communities to wastewater drainage from aquaculture farms remains unclear. This study used the 16S rRNA approach to explore the profiles of bacterial communities over four seasons in a typical crab aquaculture farm that included a pond and an outlet ditch. Nineteen sediment samples and an equal number of water samples were collected and analysed during spring, summer, autumn, and winter during 2018-19. Our results showed that Proteobacteria, Chloroflexi, and Bacteroides were the predominant phyla in aquaculture pond sediment with the relative abundance of 28.95%, 17.32%, and 15.31%, respectively. The relative abundance of Proteobacteria and Bacteroides was higher in autumn and winter, and the relative abundance of Chloroflexi was highest in spring. The Shannon diversity index value ranged from 6.17 to 9.30 and showed significant positive correlation (P < 0.01) with the concentrations of TN, NH₄⁺-N, and TP in the water. The variation in the bacterial community and relative abundance in outlet ditch sediment were consistent with those in the pond sediment. Our results show that determinisation of the bacterial community composition in the outlet ditch sediment provides a novel tool to monitor watersheds sensitive to the influence of aquacultures.

Effect of heavy metals on the performance and bacterial profiles of activated sludge in a semi-continuous reactor

Heavy metals are toxic to microorganisms at specific concentrations and can have a serious effect on the efficiency of biological wastewater treatment plants. The wastewater treatment performance and bacterial communities of activated sludge were investigated at different heavy metal concentrations (0.1-10 mg L^-1 for Cd(II), Pb(II) and 1-100 mg L^-1 for Cu(II)) in a well-controlled semi-continuous reactor in 30 d period. Glucose was added once every 8 h as the carbon source throughout the experiment. The heavy metal toxicity was related to chemical oxygen demand (COD), total organic carbon (TOC), three-dimensional fluorescence excitation-emission matrix (EEM) spectroscopy, bacterial activity and community composition. The first-order consumption rate for glucose showed that the activity was decreasing in comparison to the control. The COD removal efficiency was also decreased from 87% to 26% in all the reactors under different heavy metal concentrations treatment. The PCR-DGGE and sequencing results revealed that the bacterial diversity showed evident variations under heavy metal stress owing to the potential toxicity of heavy metals. At the genus level, Pedobacter steynii and Flavobacterium, were only tolerant to Cu(II) at 100 mg L^-1, while Rhodanobacter thiooxydans resisted to all heavy metal concentrations except Cu(II) 100 mg L^-1. Cluster analysis and Principal component analysis (PCA) revealed that the microbial community in Cu(II) was different from the sludge samples treated with Cd(II) and Pb(II) concentrations. The study indicated that it is necessary to identify the metal tolerant species of bacteria for maintaining good performance of biological wastewater treatment plants.

Using flow cytometry for bacterioplankton community analysis as a complementary tool to Water Framework Directive to signal putatively impacted sites

Metal contamination, as well as pesticides, organic matter and nutrient input are main factors leading to freshwater ecosystems degradation. The Water Framework Directive (WFD) was implemented within the European Union with the ultimate goal of promoting a good ecological status in all European waterbodies. However, the broad implementation of the bioassessment behind WFD is costly and time-consuming and the search for complementary methodologies has been given significant attention. In this context, the main goal of this study was to evaluate whether flow cytometry (FCM) and denaturing gradient gel electrophoresis (DGGE) can be used as cellular/molecular tools to efficiently assess riverine bacterioplankton communities and relevantly inform on the ecological quality of these ecosystems. Caima river was chosen as case study using three sampling sites reflecting different levels and types of contamination (point-source organic and metal input). Both bacterioplankton community assessment approaches (DGGE and FCM), as well as macroinvertebrate and periphyton communities were consistent in signaling organic contamination. The putatively metal-loaded site bears some contradictory results depending on the community focused, possibly due to the overall low levels of metals actually found and seasonality. When comparing the two bacterioplankton community analysis tools, DGGE and FCM, the results obtained were essentially coherent, with FCM being simpler, faster and still accurate for screening bacteria communities via quantification of bacteria of high and low DNA content. This highlights the suitability of the FCM approach for prioritization of contaminated sampling sites and reinforces the suitability of using bacterioplankton communities as the focus of rapid tools to complement bioassessment sensu the WFD methodology, e.g. assisting the prioritization of potentially impacted areas.

Effects of copper ions on removal of nutrients from swine wastewater and on release of dissolved organic matter in duckweed systems

High concentration of Cu²⁺ in swine wastewater raises concerns about its potential adverse effects on nutrient removal by aquatic plants like duckweed. In this work, the effects of copper ions on nutrient removal and release of dissolved organic matter (DOM) were investigated in duckweed systems. Results showed that the removal performance of ammonia nitrogen (NH₃N) and total phosphorus (TP) increased at 0.1-1.0 mg/L of Cu²⁺, while dropped at 2.0-5.0 mg/L of Cu²⁺. A novel kinetic model in which Cu²⁺ was taken into account was then developed which was used to optimize Cu²⁺ concentration at 0.96 mg/L for nutrient removal in duckweed systems. NADH, detected in DOM by the parallel factor (PARAFAC) analysis, exhibited high capacities of binding copper ions, so it played an important role on the decrease of Cu²⁺ concentrations in duckweed systems. The principle component analysis (PCA) showed that the dominant DOM were lower molecular weight compounds at 1.0 mg/L of Cu²⁺ and higher molecular weight compounds at 2.0-5.0 mg/L of Cu²⁺. The bonds of CH (humic-like), NO (NO₃^-) and ArH (tyrosine) in DOM were responsible for not only the fastest binding with Cu²⁺ from the result of the two-dimensional Fourier transform infrared correlation spectroscopy (2D-FTIR-CoS) but also the variations of DOM conformations at a critical concentration of 0.5 mg/L Cu²⁺ from the perturbation correlation moving window two-dimensional (PCMW2D) analysis. These findings lead to a better understanding on the environmental behaviors and mechanisms of Cu²⁺ in duckweed systems.

Performance of physical and chemical methods in the co-reduction of internal phosphorus and nitrogen loading from the sediment of a black odorous river

The continuous release of nutrients from sediment is a major barrier to the remediation of black odorous rivers. This study used a long-term laboratory incubation experiment to investigate the effectiveness of sediment dredging, intermittent aeration, and in situ inactivation with modified clays to reduce the internal loading of sediment from a seriously polluted river. The results indicated that intermittent aeration and in situ inactivation were effective in reducing the TN and NH₄⁺ concentrations in the water column. However, sediment dredging did not consistently reduce the TN and NH₄⁺ concentrations in the water column. In contrast, the three methods were all effective in controlling the TP and PO₄^3- concentrations in the water column. Except for dredging, >30% of NH₄⁺ and 40% of PO₄^3- fluxes from sediment were reduced when compared with a control sample after 120 days of remediation. Dredging induced a significant release of NH₄⁺ from sediment. Dredging and aeration made nearly no change to the amount of extractable nitrogen in the sediment. However, inactivation may increase sediment-extractable ammonium in deep sediment layers with time due to vertical transportation of clay by intensive bioturbation. Dredging is the most effective way to reduce surface mobile phosphorus over time while the transported clays can reduce a large percentage of the mobile phosphorus in deeper sediment. The relative abundance of Nitrospira in the surface sediment increased significantly with each remediation measure, creating favorable conditions for the reduction of the ammonium released from sediment. Altogether, the results of this study indicated that clay inactivation is the best method for controlling the internal loading of both phosphorus and nitrogen in seriously polluted river sediment.

Heavy metal spill influences bacterial communities in freshwater sediments

Bacteria are highly abundant in freshwater sediments and play a crucial role in biogeochemical cycling. Bacterial assemblage is known to be sensitive to heavy metal pollution. However, the shift in freshwater sediment bacterial community after a sudden exposure to heavy metal spill remains unknown. The present study explored the impact of metal (metalloid) spill on sediment bacterial community in a freshwater reservoir. Although sediment bacterial abundance was relatively insensitive to metal (metalloid) spill, bacterial richness, diversity and community structure displayed considerable temporal variations. In addition, the proportions of Proteobacteria Chloroflexi, Nitrospirae, Acidobacteria and Bacteroidetes drastically declined, while a significant enrichment of Firmicutes was observed.

A comprehensive mitigation strategy for heavy metal contamination of farmland around mining areas - Screening of low accumulated cultivars, soil remediation and risk assessment

A three-year field test was conducted in an area surrounding past mining activity (mining area) to investigate the value of a novel comprehensive remediation strategy for Cd and Pb contamination, which included screening of low accumulated vegetable cultivars that take up Cd and Pb less than normal cultivars, in situ soil remediation using different soil amendments, and health risk assessment that evaluates the possibility of safe consumption for the vegetables. Results showed that cultivar Huoqing 91-5C of which vegetable was selected as a low accumulator of Cd and Pb in a soil contaminated with 0.5 mg kg^-1 and 8180 mg kg^-1 total Cd and Pb concentrations, respectively. Addition of 20 t ha^-1 of biochar with 2 t ha^-1 of calcium superphosphate in 10 cm depth could decrease available Cd and Pb by 70% and 85% after 1 year, respectively. Following treatments, hazard quotients for adults and children were below 1, indicating that the vegetables grown were safe for human consumption. The total cost of remediation was $3885 ha^-1, so the cost of the remediation of the combination of Cd and Pb was economic in this mining area.

Response of freshwater sediment archaeal community to metal spill

Archaea play an important role in the biogeochemical cycling of elements in the environment. Heavy metals are ubiquitous pollutants in the environment. Previous studies have revealed a considerable influence of metal pollution on the archaeal community, but the short-term response of the archaeal community to metal pollution remains unclear. Hence, the present study investigated the short versus long-term responses of overall archaeal communities in freshwater sediments after exposure to accidental metal pollution caused by the discharge of heavy metal-containing wastewater from an indium-producing factory. Quantitative PCR was used to determine the archaeal abundance, while Illumina MiSeq sequencing was applied to characterize the diversity and structure of the archaeal community. The abundance (2.47 × 10⁵-1.55 × 10⁸ archaeal 16S rRNA gene copies per gram dry sediment), diversity (Shannon diversity index = 2.49-4.45) and structure of overall archaeal community illustrated a drastic temporal change. The archaeal communities mainly comprised the phyla Euryarchaeota, Thaumarchaeota and Bathyarchaeota. The exposure to metal pollution induced an increase in the proportion of Euryarchaeota but lowered the proportion of Thaumarchaeota. The accidental metal pollution exerted a profound impact on the archaeal community in freshwater sediment. This study could contribute our understanding of the short versus long-term response of archaeal communities to metal pollution.