Spectroscopic fingerprints profiling the polysaccharide/protein/humic architecture of stratified extracellular polymeric substances (EPS) in activated sludge

Accelerated sludge granulation of novel complete ammonium and nitrate removal via denitratation anammox over nitrite process at elevated loading rates

The Complete Ammonium and Nitrate Removal via Denitratation Anammox Over Nitrite (CANDAN) process was evaluated for rapid sludge granulation in a lab-scale sequencing batch reactor. Over 119 days under increasing nitrogen loading rates (NLRs), the system finally achieved average 89.2 % total nitrogen removal at 1.93 kg N/m3/d NLR, with sludge particle sizes increasing from 215.6 μm to 924.5 μm. Higher NLRs significantly increased extracellular polymeric substances, especially hydrophobic proteins, enhancing sludge hydrophobicity and aggregation. Metagenomic analysis identified Candidatus Brocadia and Thauera as predominant and key microbial genera for nitrogen removal. Furthermore, the upregulation of carbon metabolism under heightened NLRs facilitated the synthesis of hydrophobic amino acids, promoting sludge granulation. These findings demonstrate NLR-driven granulation mechanisms, highlight optimizing NLR as key for accelerating granulation, providing insights to improve start-up and operational efficiency of CANDAN systems.

Heterogeneous microstructure induces floatation in high-rate anammox granules

The floatation of anammox granules can be a serious challenge in practical wastewater treatment, as it can deteriorate reactor performance and cause bacterial loss. To deepen the understanding of floatation mechanism, in this study, both the floating (F-AnGS) and settling anammox granules (S-AnGS) from a high-rate anammox reactor were comparatively investigated. F-AnGS demonstrated 1.6 times higher specific anammox activity compared to S-AnGS, but only 65 % of produced gas could be successfully released, as quantified by anaerobic respirometry. In addition to the overall EPS accumulation, F-AnGS exhibited a heterogeneous microstructure distinct from that of S-AnGS, as revealed by 3D X-ray microscopic imaging at the single granule level. The heterogeneous distribution of EPS, which can form a dense surface layer, was the main cause for granule floatation. The heterogeneous microstructure of F-AnGS can reduce the distance between microorganisms and enhance the metabolic interaction between anammox bacteria and heterotrophs. The abundance of community members did not have a significant variation, but the functional genes related to anammox and partial denitrification pathway were significantly increased, indicating the enhanced nitrite loop in F-AnGS. This study proposed new structural insights into mechanism of anammox granule floatation, suggesting the appropriate activity control of granule-based anammox process.

Enhanced denitrification under saline Conditions: Glycine betaine as a key osmoprotectant

Biological denitrification is significantly inhibited by salinity, which adversely affects microbial activity and reduces efficiency. This study aimed to evaluate the impact of salinity on denitrification performance and assess the potential of glycine betaine (GB) as an osmotic pressure regulator and protective agent. Results indicated that under the optimal conditions, including an influent nitrate concentration of 51.03 mg L-1, C/N ratio of 5.42, pH value of 8.95, and salinity of 1.05 %, the nitrate removal efficiency was predicted to reach 100 %. However, a sharp decline (56.09 ± 4.52 %) in nitrate removal efficiency occurred when salinity increased from 0 % to 3 % within the initial 6 h. This inhibition was mitigated by adding 25 mg L-1 GB, which enhanced nitrate removal efficiency by 2.19 times. GB promoted the secretion of extracellular polymeric substances (EPS), especially polymeric protein, a critical contributor to salinity resistance. Metagenomics analysis revealed that GB improved denitrification process by upregulating key genes involved in nitrogen and carbon metabolism. Furthermore, the relative abundance of Na+ transporter genes, K+ transporter genes, and GB absorption and synthesis genes rose with GB addition, underscoring the indispensable role of GB in alleviating osmotic stress and accelerating microbial metabolism. These findings emphasize the detrimental effects of salinity on denitrification and demonstrate the potential of GB as an osmoprotectant, enabling efficient nitrogen removal under saline conditions.

Simultaneously enhance nutrient removal and sludge settleability through hydrocyclone-based technology in a full-scale high-inert containing activated sludge process

Sludge densification technology through hydrocyclone is a promising solution to address the challenge related to increasing loading rate in existing municipal wastewater treatment plants (WWTPs). Although previous studies have investigated the positive effects of hydrocyclone on improving nutrient removal and sludge settleability, little is known if sludge densification technology is still function into the high inert containing activated sludge process in China. This study investigated technical feasibility and revealed underlying mechanisms to simultaneously enhance nitrogen and phosphorus removal and sludge settleability through installing a hydrocyclone-based sludge densification module in a full-scale WWTP with a designed capacity of 4 × 104 m3/d. Compared to the control line without hydrocyclone, the hydrocyclone installation helped improve total nitrogen and total phosphorus removal efficiency by 16.9 % and 29.4 % (p < 0.05), with the effluent concentrations of 4.86 ± 1.08 mg/L and 0.077 ± 0.035 mg/L, respectively. The strategy of "hydrocyclone treating only half of the wasted activated sludge (WAS) to produce densified activated sludge (DAS)" successfully prevented the accumulation of inerts in the mainstream. Meanwhile, sludge settleability after densification was improved, as evidenced by a reduced sludge volume index (SVI30) by 7.6 mL/g (53.2 ± 7.30 mL/g) and an increased settling velocity by 2 m/h (4.04 ± 0.60 m/h) compared to control line. Beyond selecting few large-sized DAS, the hydrocyclone also targeted small, densified flocs containing ballasting inerts (primarily Fe/Al-based hydroxides and phosphates) within high-inert containing activated sludge, further enhancing sludge settleability. The hydraulic shear forces of the hydrocyclone promoted the release of active sites from metal hydroxides, further enhancing phosphorus removal in mainstream. Meanwhile, shear forces lead to the disruption of DAS and ordinary flocs but also promoted the binding of flocs and inerts, forming densified flocs. The anoxic zones formed within DAS enabled denitrifying phosphorus-accumulating organisms (DPAOs) and denitrifiers to preferentially utilize polysaccharides of extracellular polymeric substances (EPS) for nutrient removal, thereby enhancing functional enzyme activity. These findings provide an important basis for the application of sludge densification technology in high-inert containing activated sludge process.

Waste iron shavings to advance anaerobic treatment of acidic poly (butylene adipate-co-terephthalate) wastewater in submerged anaerobic membrane reactor

The wastewater generated during the synthesis of biodegradable plastics, namely poly (butylene adipate-co-terephthalate) (PBAT), is greatly acidic and contains various toxic pollutants. Adding waste iron shavings (WIS) into the submerged anaerobic membrane bioreactor to construct the coupled reactor (WIS-Reactor) holds promise for improving the treatment efficiency of acidic PBAT wastewater. The results showed that the chemical oxygen demand (COD) and volatile fatty acids (VFAs) removal efficiencies of WIS-Reactor were increased by 2.36 and 9.92 times, respectively, compared with the control. Even under strongly acidic influent conditions (pH = 4.0), the methane conversion efficiency (227.07 mLCH4/gCODr) and COD removal rate (51.80 %) in WIS-Reactor were maintained consistently. The pH value in WIS-Reactor increased to around 6.0, the alkalinity increased by 1.5 times due to hydrogen evolution corrosion, and the sludge concentration increased by 19 % without a substantial increase in membrane fouling. Further analysis showed that iron ions released by WIS promoted the secretion of coenzyme F420, enhanced electron transfer between microorganisms, and accelerated CH4 production through enhancing the hydrogenotrophic methanogenesis pathway. Additionally, WIS promoted the enrichment of acidogenic bacteria (Corynebacterium) and electroactive microorganisms (Synergistaceae), and may accelerate the electron transfer efficiency between Syntrophomonas and Methanosaeta through direct interspecies electron transfer, thereby improving the anaerobic digestion of acidic PBAT wastewater.

Terahertz molecular vibrational sensing using 3D printed anapole meta-biosensor

Terahertz (THz) fingerprint sensing utilizes the absorption of fingerprints generated by the unique vibrational characteristics of molecules to achieve substance-specific identification. By taking full advance of the anapole mode induced-biosensor consisting of out-of-plane metal-insulator-metal (MIM) configuration, the D-glucose solutions down to physiological level are accurately detected by proposed metasurface biosensor through the electromagnetic induced absorption (EIA) effect induced by the interaction between the metasurface and molecular vibrational fingerprint. Besides, by utilizing the vibrational fingerprint sensing ability, the pure D-glutamic acid and D-lactose, as well as their mixture have been quantitatively characterized. In addition, with the aid of machine learning algorithms, the designed single resonance metasensor achieves 100% recognition of five molecules. This work brings a convincing strategy for trace label-free molecular recognition for various species, which might extend the promising potentials of THz sensing techniques toward biomedical testing and clinical diagnosis.

Tuning pH to motivate chain reaction of iron release with extracellular polymeric substances formation for long lasting Fe0-driven autotrophic denitrification

Although zero-valent iron (Fe0)-driven autotrophic denitrification (ADN) is free of external carbon source during nitrogen removal, Fe0 surface passivation restricted the nitrogen removal capacity of Fe0-driven ADN. Tuning influent pH can boost Fe0 corrosion, thereby improving Fe0-driven ADN. It is imperative to find the pH balance between Fe0 corrosion and autotrophic denitrifying bacteria growth. Herein, by altering pH over a wide range of 5.0-9.0 in batch operation, it was confirmed that the optimal pH of 6.0 maintained Fe0 corrosion and denitrifying bacteria growth simultaneously. The maximum total nitrogen (TN) removal efficiency of 87.0 % was accomplished at the influent pH of 6.0 in batch operation. Furthermore, the TN removal efficiency in continuous flow operation reached as high as 84.8 % when the influent pH was 6.0 and hydraulic retention time was 24 h. Meanwhile, the released Fe2+ and Fe3+ from Fe0 corrosion significantly promoted the formation of extracellular polymeric substances (EPS). EPS facilitated the electron transfer between Fe0 and nitrate (NO3--N), consequently promoting nitrogen removal. The genera of Thauera and Defluviimonas were dominant denitrifiers in batch operation, while Ellin6067 prevailed in continuous flow operation, utilizing EPS as carbon source. The microbial community exhibits a certain disparity between batch and continuous flow operation modes. However, the similar nitrogen removal pathway maintained a stable denitrification efficiency in both batch and continuous flow reactors. Modulating influent pH to bolster Fe0-driven ADN was a promising and handy strategy in actual application.

Metabolic and ecological responses of denitrifying consortia to different carbon source strategies under fluctuating C/N conditions

Frequent fluctuations in the carbon-to-nitrogen (C/N) ratio of urban wastewater influent can undermine denitrification performance, posing challenges for stable nitrogen removal. Although supplying additional carbon sources is a recognized strategy to mitigate these issues, the underlying microbial interactions and metabolic reconfigurations triggered by changing C/N ratios remain incompletely understood. Here, we employed methanol, glycerol, sodium acetate, and glucose in long-term denitrification reactors and integrated denitrification kinetics, 16S rRNA gene amplicon sequencing, metagenomic binning, and metabolic modeling to elucidate how these systems respond to a declining C/N ratio. Our results show that lower C/N ratios diminished denitrification efficiency in all treatments, with each carbon source eliciting distinct shifts in microbial assemblages. Fluctuations in the C/N ratio determine the extent of directional selection of microbial communities based on carbon source metabolism and induce significant changes in non-dominant microorganisms. Throughout the process, the synthesis potential of PHA is closely linked to the system's ability to withstand fluctuations. Notably, metabolic modeling indicated that heightened tricarboxylic acid (TCA) cycle activity in the methanol- and glucose-fed communities was associated with suboptimal nitrogen removal. These findings offer novel insights into the metabolic and ecological mechanisms governing carbon source-driven denitrification under fluctuating C/N conditions, providing a valuable framework for optimizing nitrogen removal in urban wastewater treatment systems.

A novel dynamic membrane-equipped element sulfur-based denitrification reactor for efficient and easily maintainable treatment of high-nitrate wastewater

Using powdered sulfur (S0) with high specific surface area enables high efficiency in an elemental sulfur-based denitrification (ESDeN) reactor but faces challenges with S0 retention. While integrating the ESDeN process with microfiltration membranes (MM) has been shown to effectively reject S0 powder, severe membrane fouling and high membrane costs restrict its practical application. This study, for the first time, reports a dynamic membrane-equipped ESDeN (ESDeN-DM) reactor. The DM was formed by in-situ pre-coating a solid mixture (particle size: 0.4 μm to 110 μm) of S0 powder and denitrifying sludge onto inexpensive nylon fabrics. Initially, we optimized the DM formation conditions, determining that a nylon fabric pore size of 25 μm and a pre-coating flux of 300 L m-² h-1 resulted in permeate turbidity lower than 5 NTU within 60 mins. Subsequently, we identified the duration (12.5 days) of a transmembrane pressure (TMP)-dependent run (≤30 KPa) for the reactor and found that the TMP increase was related to the thickening and densification of the cake layer. Finally, we conducted a comparative examination of the ESDeN-DM reactor and the conventional ESDeN-MM reactor during long-term operation. The results demonstrated that the ESDeN-DM reactor achieved a comparable denitrification rate to the ESDeN-MM reactor (both with the maximum value more than 3 kg N m⁻3 d⁻¹) but exhibited significantly better membrane fouling tolerance (56 % longer TMP-dependent run time), easier regeneration of specific flux (online backwash versus offline chemical cleaning), and exceptional cost-effectiveness (over 90 % total cost reduction). This study presents a highly efficient and easily maintained membrane-equipped ESDeN process with great potential for treating high-nitrate industrial wastewater.

Mild Tuning of the Microbial Habitat via Titanium-Based Pre-coagulation Mitigates Reverse Osmosis Membrane Fouling

Membrane fouling remains a persistent challenge in reverse osmosis (RO) systems. Devising effective strategies to mitigate membrane fouling has become crucial for sustainable water treatment. Here, we propose a titanium-based pre-coagulation strategy for RO fouling mitigation through regulation of the microbial habitat in RO feed. The pre-coagulation performance of Ti(SO4)2 for desulfurization wastewater and the subsequent RO fouling mechanism were systematically investigated. Our findings revealed that the Ti pre-coagulation induced an acidized environment, maintained a balance between organic and inorganic depositions, and fostered a beneficial microbial community that resisted rapid fouling. The 20 day RO operations in different pre-coagulation scenarios (Ti, Al, and Ctrl) showed that the Ti group membranes maintained the highest normalized flux at 57.15%, outperforming the Ctrl and Al groups by 7.92% and 15.16%, respectively. Microbial community analyses, including taxonomic profiling and metagenomic analysis, demonstrated that Ti-based pre-coagulation reduced the dominance of extracellular polymeric substance (EPS)-secreting genera, such as Sphingopyxis, while promoting Terrimonas and Paenarthrobacter, with acid-tolerance traits and reduced EPS production. This shift mitigated biofouling by enhancing microbial balance and limiting biofilm formation. These results underscored the potential of the Ti pre-coagulation-based microbial habitat tuning strategy in enhancing RO system sustainability, offering a practical solution for improving industrial wastewater treatment.

Reduction of Fe(III) from iron-rich sludge by Geobacter to reconstruct MIL-100(Fe)@Fe3O4 to accelerate electron transfer and organic pollutants mineralization in Fenton-like system

Iron-rich sludge contains abundant iron resources, yet lacks high-value processing methods. Iron-based metal-organic frameworks (Fe-MOFs), such as MIL-100(Fe), are widely used but suffer from considerable attrition and hardly recycle. Integrating iron extraction from sludge with Fe-MOF modification is promising for solid waste management. The redox capabilities of Geobacter, along with its production of Extracellular polymeric substance (EPS), hold potential for enabling this process. Nevertheless, the underlying mechanisms remain unclear, and the performance of the resulting product needs evaluation. In this study, Geobacter successfully loaded reduced Fe3O4 from iron-rich sludge onto MIL-100(Fe), creating MIL-100(Fe)@Fe3O4 (MF), a mesoporous nanomaterial with magnetic recovery. MF demonstrated excellent catalytic performance and repeatability, with removal efficiencies 1.4-2.5 times than those of MIL-100(Fe) in terms of pollutants. After seven cycles, the catalytic performance of MF remained stable because of the exist of EPS produced by Geobacter. Density Functional Theory (DFT) calculations confirmed that Fe3O4 loading enhanced charge transfer, improving catalytic efficiency. This study offers important insights on Geobacter for the pivotal role between iron-rich sludge and Fe-MOFs, which achieve the sustainable recovery and efficient utilization of solid waste.

Overlooked role of extracellular polymeric substances in antibiotic-resistance gene transfer within microalgae-bacteria system

Controlling the spread of antibiotic-resistance genes (ARGs) under antibiotic stress has become an increasingly urgent issue. Microalgae possess the capability to remove antibiotics while concurrently inhibiting ARGs. Microalgae-bacteria systems can produce significant quantities of extracellular polymeric substances (EPS). However, the roles of EPS in the spread of ARGs have not been sufficiently explored, resulting in an insufficient understanding of the contribution of each EPS component and a lack of analysis on the complex interactions between EPS and ARGs. This study systematically explored the overlooked role of EPS in the transmission of ARGs within microalgae-bacteria systems. The current results showed that the potential of the microalgae-bacteria system for treating antibiotic wastewater. The tightly bound-EPS (TB-EPS) can acquire the higher absolute abundances of ARGs compared with the loosely bound-EPS (LB-EPS). The correlation coefficient between polysaccharides and TB-EPS ARGs was higher than that between polysaccharides and LB-EPS ARGs. The gene patterns of LB-EPS closely clustered with those of TB-EPS, while intracellular ARG gene patterns differed from both TB-EPS and LB-EPS. Metagenomic analyses indicated that the relative abundances of sul1 and sul2 were considerably higher at the beginning stage compared to the end stage. The abundance of Achromobacter, increased by the end stage, aligning with its potential to produce exopolysaccharide. Additionally, the absolute abundance of genes encoding exopolysaccharides (nagB and galE) and conjugative transfer transcription regulator (traF), increased over time. These findings enhanced our comprehension of the significance of EPS on the fate of ARGs in microalgae-bacteria systems during the treatment of antibiotic-contaminated wastewater.

A synergistic approach integrating potassium ferrate oxidation with polyacrylamide flocculation to enhance sludge dewatering and its mechanisms

Sludge dewatering is a critical phase in sludge treatment and disposal, significantly impacting storage, transportation, and subsequent handling. This study introduces an innovative approach combining potassium ferrate (PF) oxidation and polyacrylamide (PAM) flocculation to synergistically enhance sludge dewatering efficiency. PF disrupts EPS and releases bound water, while PAM restores floc structure, addressing the limitations of standalone oxidation. Initial PF conditioning significantly reduced sludge water content (Wc) to 75.18 %, attributed to the oxidative breakdown of extracellular polymeric substances (EPS) and the release of bound water. However, higher PF doses increased specific filtration resistance (SFR) and capillary suction time (CST), indicating deteriorated filterability. The subsequent addition of PAM mitigated these issues, further reducing Wc to 73.64 %, SFR from 12.75 × 1012 m/kg to 3.62 × 1012 m/kg, and reduced CST from 88.95 s to 32.3 s, demonstrating marked improvements in dewatering performance. Characterization studies revealed the underlying mechanisms: PF-induced sludge fragmentation and EPS degradation, followed by PAM-mediated re-flocculation and structural reorganization. Further, applying XDLVO theory and Flory-Huggins lattice theory revealed changes in the sludge's surface hydrophilicity and the system's chemical potential, improving SFR and enhancing dewatering efficiency while reducing moisture content. This investigation not only offers an innovative dewatering approach but also underpins the mechanism of improved dewaterability.

Unravelling the mechanism of residual sludge promoting rapid formation of microalgal-bacterial granular sludge: Enhancement of extracellular polymers substances and electron transfer efficiency

Microalgal-bacterial granular sludge (MBGS) is a sustainable biotechnology that has attracted increasing attention, but there remains limited knowledge about the utilization of residual sludge generated from MBGS. This present work proposed a promising approach to rapidly construct the MBGS system from activated sludge by inoculating residual microalgal-bacterial sludge. Compared with inoculated activated sludge, the newly formed MBGS maintained a stable structure, higher biomass content (4.51 g/L), better settleability (42 mL/g), and higher pollutant removal. The results indicated that inoculation of residual sludge resulted in higher extracellular polymeric substances (EPS) content and promoted the microbial aggregation. Besides, this increase effectively improved the electron transfer efficiency within the particle, which facilitated the granulation of MBGS. Microbial community analysis revealed that the dominant bacteria (Pseudofulvimonas and Thauera) were mainly responsible for the secretion of EPS. Furthermore, the nitrogen and phosphorus metabolic pathways were also promoted to some certain extent. In conclusion, the inoculation of residual sludge can achieve an effective reduction in granulation period. This study provides a novel insight and fills the gap in the utilization of residual sludge generated by MBGS.

Acclimation Time Enhances Adaptation of Heterotrophic Nitrifying-Aerobic Denitrifying Microflora to Linear Anionic Surfactant Stress

Linear anionic surfactants (LAS) pose significant stress to microbial denitrification in wastewater treatment. This study investigated the performance and adaptation mechanisms of heterotrophic nitrification-aerobic denitrification (HN-AD) microbial consortia under LAS exposure after short-term (SCM, 2 months) and long-term (LCM, 6 months) acclimation. Results showed a dose-dependent inhibition of total nitrogen (TN) removal, with LCM achieving 97.40% TN removal under 300 mg/L LAS, which was 16.89% higher than SCM. Biochemical assays indicated that LCM exhibited lower reactive oxygen species (ROS) levels, a higher ATP content, and reduced LDH release, suggesting enhanced oxidative stress resistance and membrane stability. EPS secretion also increased in LCM, contributing to environmental tolerance. Metagenomic analysis revealed that long-term acclimation enriched key genera including Pseudomonas, Aeromonas, and Stutzerimonas, which maintained higher expression of denitrification (e.g., nosZ, nirS) and ammonium assimilation genes (glnA, gltB). Although high LAS concentrations reduced overall community diversity and led to convergence between SCM and LCM structures, LCM retained greater functional capacity and stress resistance. These findings underscore the importance of acclimation in sustaining denitrification performance under surfactant pressure and offer valuable insights for engineering robust microbial consortia in complex wastewater environments.

Extracellular polymeric substances in indigenous microalgal-bacterial consortia: advances in characterization techniques and emerging applications

Extracellular polymeric substances (EPS) synthesized by indigenous microalgal-bacterial consortia (IMBC) play multifunctional roles in enhancing wastewater treatment efficiency, nutrient sequestration, and ecological system stability. This comprehensive review critically evaluates state-of-the-art analytical methods for characterizing EPS composition, physicochemical properties, and functional dynamics, including colorimetry, Fourier-transform infrared (FTIR) spectroscopy, X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and confocal laser scanning microscopy (CLSM). While these methods provide critical insights into EPS structure-function relationships, challenges persist in resolving spatial heterogeneity, real-time secretion dynamics, and molecular-scale interactions within complex IMBC systems. Emerging technologies such as expansion microscopy (ExM), electrochemical impedance spectroscopy (EIS), and integrated multi-omics approaches are highlighted as transformative tools for in situ EPS profiling, offering nanoscale resolution and temporal precision. By synthesizing these innovations, this review proposes a multidisciplinary framework to decode EPS-mediated microbial symbiosis, optimize IMBC performance, and advance applications in sustainable bioremediation, bioenergy, and circular resource recovery.

Enhancement of Partial Nitrification-Anaerobic Ammonia Oxidation in SBR Reactors via Surface-Modified Polyurethane Sponge Biofilm Carrier

The partial nitrification-anammox process offers a cost-effective, energy-efficient, and environmentally sustainable approach for nitrogen removal in wastewater treatment. However, its application under low ammonia nitrogen conditions faces operational challenges including prolonged start-up periods and excessive nitrite oxidation. This study employed a strategy combining polyurethane surface positive charge enhancement and zeolite loading to develop a carrier capable of microbial enrichment and inhibition of nitrate generation, aiming to initiate the partial nitrification-anammox process in a sequencing batch reactor. Operational results demonstrate that the modified carrier enabled the reactor to achieve a total nitrogen removal efficiency of 78%, with the effluent nitrate nitrogen reduced to 6.03 mg-N/L, successfully initiating the partial nitrification-anammox process. The modified carrier also exhibited accelerated biofilm proliferation (both suspended and attached biomass increased). Additionally, 16S rRNA revealed a higher relative abundance of typical anammox bacteria Candidatus Brocadia in the biofilm of the modified carrier compared to the original carrier, alongside a decline in nitrifying genera, such as Nitrolancea. These microbial shifts effectively suppressed excessive nitrite oxidation, limited nitrate accumulation, and sustained efficient nitrogen removal throughout the reactor's operation.

Spatial heterogeneity of EPS-mediated microplastic aggregation in phycosphere shapes polymer-specific Trojan horse effects

The pervasive contamination of aquatic ecosystems by microplastics represented a critical environmental challenge. While algal-bacterial symbiosis systems demonstrated potential for microplastic aggregation via extracellular polymeric substances (EPS), prior studies have focused on temporal dynamics rather than spatial heterogeneity in phycosphere. This study systematically investigated the adsorption mechanisms of Polyvinyl chloride (PVC), polyethylene terephthalate (PET), polyethylene (PE) and polystyrene (PS) across stratified EPS fractions, tightly bound (TB-EPS), loosely bound (LB-EPS), and soluble (S-EPS), in phycosphere. Combining controlled aggregation assays with multimodal characterization, we revealed a hierarchical spatial framework governing EPS-microplastic interactions. Adsorption efficiency governed by polymer-specific interfacial energies and EPS organic composition. EPS at distinct hierarchical levels exhibited material-specific adsorption preferences for microplastics. PVC and PET demonstrated higher affinities for hydrocarbon components, while PE and PS were preferentially captured through interactions with polysaccharides and amide I groups, respectively. The adsorption and aggregation behaviors between EPS and microplastics in the phycosphere promoted eco-corona formation and induced the Trojan horse effect. However, the energy barrier of interaction forces and EPS spatial configurations jointly governed the hierarchical stabilization of polymer-specific microplastics. PVC and PET primarily colonized the outermost S-EPS layer, PS preferentially accumulated in the intermediate LB-EPS layer, and PE penetrated into the innermost TB-EPS layer. These findings addressed a key knowledge gap by delineating the ecological niche-specific distribution of EPS-microplastic binding, offering novel insights for optimizing bioremediation strategies and informing regulatory measures targeting particulate plastic pollution in hydrologic systems.

Enhanced propionate degradation and CO2 electromethanogenesis in an up-flow dual-chamber electrocatalytic anaerobic bioreactor (UF-DC-EAB): Leveraging DIET-mediated syntrophy for microbial stability

Anaerobic digestion faces numerous challenges, including high CO2 content in biogas and volatile fatty acids (such as propionate) accumulation in digestate. To address these issues, an up-flow dual-chamber electrocatalytic anaerobic bioreactor (UF-DC-EAB) was developed to enhance propionate degradation through microbial symbiosis while improving biogas quality via CO2 electromethanogenesis. Under the extreme conditions with propionate as the primary carbon source at 6-h HRT, the UF-DC-EAB achieved a propionate removal efficiency of 72.1 ± 9.4 % and a faradaic efficiency of 25.5 ± 5.1 %. Microbial community analysis revealed an enrichment of acetoclastic methanogens (Methanosarcinales, 5.4 %) and syntrophic propionate-oxidizing bacteria (Syntrophobacterales, 13.9 %) in the anode, which facilitated propionate degradation. In the cathode, hydrogenotrophic methanogens (Methanobacterium, 13.6 %) and electroactive bacteria (Geobacter, 6.2 %) were predominant, further promoting CO2 electromethanogenesis and biogas upgrading. Co-occurrence network and structural equation modeling indicated that the electrocatalytic regulation roused the intrinsic capability of the microbial community to oxidize propionate and provoked the occurrence of direct interspecies electron transfer (DIET) among the enriched functional microorganisms, by regulating the synthesis of key molecules like F420 and cytochrome c in response to propionate-induced changes. The DIET-mediated syntropy increased the net energy output by 212.5 %. This study presents a novel electrochemical system combining CO2 electromethanogenesis with propionate-rich digestate degradation, offering an efficient approach for anaerobic post-treatment.

Effects of Extraction Methods on the Thermal Stability of Extracellular Polymeric Substances-Based Biomaterials from Wastewater Sludge

Various methods for recovering extracellular polymeric substances (EPS)-based biomaterials from wastewater sludge exist. However, the relationships between extraction methods and properties of biomaterials have not been fully explored. In this study, the thermal properties, including activation energy (AE) and thermal decomposition mechanism, of EPS-based biomaterials extracted by different methods have been determined by thermogravimetric analysis integrated with the deconvolution method. Simultaneously, the chemical properties of these biomaterials, such as the extraction yield, chemical composition, and functional groups, have been monitored to clarify the influences of extraction methods. Notably, proteins and humic-like substances have been found as the major components to determine thermal stability and AE. Moreover, the physicochemical method shows significant effects on enhancing extraction yield and AE, with the NaOH and heat methods proving to be outstanding by delivering the highest AE of 300 kJ/mol and a substantial char formation of 24%. The results have demonstrated the significant impact of extraction methods on the thermal stability of EPS-based biomaterials. Moreover, this finding provides insights into the linkages between the properties of EPS-based biomaterials and extraction methods to guide the selection of appropriate extraction methods tailored to specific applications, including flame-resistant materials.

Effects of stratified microbial extracellular polymeric substances on microalgae dominant biofilm formation and nutrients turnover under batch and semi-continuous operation

Extracellular polymeric substances (EPS) are well-acknowledged to accelerate microalgal biofilm formation, yet specific role of stratified EPS is unknown. Bacterial biofilm stratified EPS could enrich phosphorus, whether microalgal biofilm stratified EPS could also realize phosphorus or nitrogen enrichment remains unclarified. This study investigated microalgae dominant biofilm growth characteristics and nutrients removal via inoculating microalgae and stratified bacterial EPS at various microalgae:bacteria ratios. Soluble-EPS favored biofilm establishment and chlorophyll synthesis, while loosely-bound (LB-EPS) and tightly-bound EPS (TB-EPS) improved phosphorus removal, and optimum microalgae:bacteria cell count ratio was 1:0.5. Under semi-continuous operation, stable and efficient nutrients removal was observed at hydraulic retention time (HRT) of 2 days. Both nitrogen and phosphorus enrichment by TB-EPS over LB-EPS (respectively up to 7.9 and 23.8 times) were innovatively discovered, with enhanced nutrients turnover efficiency at higher HRTs. This study provided direct evidences regarding the role of stratified EPS on microalgal biofilm development and nutrients turnover.

Enhancing Bacillus thuringiensis Performance: Fertilizer-Driven Improvements in Biofilm Formation, UV Protection, and Pest Control Efficacy

This study investigated the effects of fertilizers on the biofilm formation, ultraviolet (UV) resistance, and insecticidal activity of Bacillus thuringiensis (Bt). Bacillus thuringiensis, a widely used microbial pesticide, has a minimal environmental impact and is highly effective against specific pests but is susceptible to environmental factors in field applications. Bacterial biofilms provide protection for Bt, enhancing its survival and functionality in the environment. However, the mechanisms by which fertilizers regulate the characteristics of microbial pesticides and enhance biofilm formation are not well understood. This study evaluated the effects of six fertilizers on the bacterial biofilm formation, the UV resistance, and the insecticidal activities of Bt wettable powders. The results demonstrated that fertilizers significantly enhanced the performance of three Bt preparations (Lv'an, Kang'xin, and Lu'kang). A compound fertilizer with 8.346 g/L of KCl, 2.751 g/L of ZnSO4·7H2O, and 25.681 μL/mL of humic acid was identified by response surface optimization, achieving the maximum BBF formation with OD595 value of 2.738. Furthermore, KH2PO4, HA, and ZnSO4·7H2O notably improved the survivability of Bt preparations under prolonged UV exposure, with the compound fertilizer providing the greatest protection. What's more, fertilizers reduced the LC50 values of all Bt preparations, with the compound fertilizer decreasing the LC50 of the Lv'an Bt wettable powder to 0.139 g/L, a 3.12-fold increase in efficacy. This study demonstrated that fertilizers significantly enhance the UV resistance and insecticidal activity of Bt wettable powders by promoting bacterial biofilm formation. Herein, this study provides new strategies and theoretical support for Bt applications in modern sustainable agriculture.

Enhanced sludge dewaterability and confined antibiotics degradation in biochar-mediated chemical conditioning through modulating Fe oxidative states distribution and reaction sites in multiphase

For antibiotic-enriched waste activated sludge, classical iron-based chemical conditioning significantly enhanced sludge dewaterability. Nevertheless, the intricate constituents within sludge rapidly depleted reactive oxygen species (ROS), leading to challenges such as excessive production of iron sludge and inadequate elimination of antibiotics from sludge. Herein, we proposed an innovative strategy integrating biochar with Fe(II) for peroxymonosulfate (PMS) activation, aiming to enhance both sludge dewaterability and antibiotics elimination simultaneously. Compared to classical chemical conditioning of Fe(II)/PMS, the presence of biochar not only reduced bound water content of sludge from 1.36 g/g DS to 0.97 g/g DS, but also enhanced sulfamethoxazole (SMX) degradation rate constant from 0.015 min-1 to 0.042 min-1. Mechanism studies disclosed the essential roles of biochar in modulating Fe oxidative states distribution and reaction sites in multiphase. Initially, biochar elevated Fe(II)/Fe(III) ratio from 0.38 to 0.78 by abundant carbon defects, which significantly promoted the cumulative concentration of predominant ROS, hydroxyl radicals (•OH), from 4.6 mM to 8.1 mM. Subsequently, EPS underwent destruction by •OH, leading to the liberation of antibiotics and negatively charged polysaccharides (PS), proteins (PN). Secondly, biochar enriched hydrophobic PN with an elevated ratio of PN/PS from 0.92 to 1.50, while the charge neutralization occurred between Fe(II)/Fe(III) and PN, PS, leading to sludge particles granulation. Finally, the mesoporous structure of biochar not only achieved SMX enrichment, but also enhanced the mass transfer of Fe(II)/Fe(III) from sludge aqueous phase to its surface, ensuring that the in-situ generated •OH efficiently targets the locally concentrated SMX. Overall, this work provides a new guidance for developing biochar-mediated chemical conditioning, aiming to enhance the generation and utilization of •OH for antibiotics elimination from sludge.

Effect of metal ions on moving bed biofilm reactor (MBBR) for nitrogen removal in wastewater: Performance characteristics, flocculation efficiency and bacterial community

Advanced operational moving bed biofilm reactor (MBBR) has demonstrated to achieve simultaneous sludge yield minimization and pollutants removal. However, effect of different metal ions on MBBR performance for nutrients removal in wastewater under low carbon to nitrogen ratio is still unclear. Fate of NH4+-N and NO3--N by MBBR were explored under the influence of Mn(II), Cu(II), and Fe(II) at carbon to nitrogen ratio of 5. The result showed that Mn(II) and Fe(II) significantly improved the NH4+-N and TN removal with a removal ratio of 71.0% and 80.5%, and 77.8% and 87.5% compared to the absence of added metal ions, and Cu(II) reduced the nitrogen removal. Biofilm characteristics including extracellular polymeric substances (EPS), electron transport system activity, and reactive oxygen species were investigated. The result indicated that both Mn(II) and Fe(II) enhanced the extracellular polymeric substances activity, electron transfer, and flocculation efficiency and hydrophilicity of biofilm. Furthermore, nitrification and denitrification processes of MBBR were further evaluated by X-ray photoelectron spectroscopy, fourier transform infrared reflection, cyclic voltammetry, differential pulse voltammetry, and Tafel curves. The result revealed that the main functional groups (e.g., C=O, C-O, and O-C=O bonds), and manganese and iron cycling might be involved in the nitrogen and metal ions removal. Finally, microbial community and co-occurrence network of biofilm were studied, showing that Proteobacteria and Bacteroidetes were identified as the dominant phyla for nitrogen and metal ions removal. This study aimed to provide the technical support for the startup and engineering applications of MBBR in wastewater treatment.

Combination mechanism and dimethyl ether removal performance of organic-bound water in kitchen waste

Dewatering plays an important role in kitchen waste reduction and resource utilization; however, the mechanism of water combination and removal remains unclear. In this study, dimethyl ether solvent was used to investigate the water occurrence state and dewatering pattern in kitchen waste, and the key organic components, hydrophilic functional groups, and water removal mechanism were clarified. The results showed that all the water existed in the state of organic-bound water, in which proteins were the key organic matters affecting dewatering and the hydrophilic functional groups CO/CN, CO, and amine-N. combined with water through hydrogen bonding were the key mechanisms. Through competition with hydrophilic functional groups, dimethyl ether released 54.83-87.85% of the water to the liquid phase, while the hydrophilic components and hydrophilic functional groups were retained in the solid phase. Simultaneously, the addition of additives verified that enhanced disruption of hydrogen bonding between water and hydrophilic functional groups could improve the dewatering efficiency. It was concluded that more attention should be paid to reducing or disrupting the hydrogen bonding of hydrophilic functional groups on the surface of the solid phase with water to improve the kitchen waste dewatering performance.

Metagenomics and metaproteomics reveal the effects of sludge types and inoculation modes on N,N-dimethylformamide degradation pathways and the microbial community involved

This study demonstrated the effects of the sludge type and inoculation method on the N,N-dimethylformamide degradation pathway and associated microbial communities. The sludge type is critical for DMF metabolism, with acclimatized aerobic sludge having a significant advantage in terms of DMF metabolism performance, whereas acclimatized anaerobic sludge has a reduced DMF metabolism capacity. Metagenomic revealed increased abundances of Methanosarcina, Pelomona and Xanthobacter in the adapted anaerobic sludge, suggesting that anaerobic sludge can utilize the methyl products produced by DMF metabolism for growth. Adapted aerobic sludge had high Mycobacterium abundance, significantly boosting DMF hydrolysis. In addition, a large number of dmfA2 genes were found in aerobic sludge, more so in acclimatized sludge, indicating stronger DMF metabolism. Conversely, acclimatized anaerobic sludge showed lower abundance of dmd-tmd and mauA/B, qhpA genes, implying long-term DMF toxicity reduced anaerobic microbial activity. Metaproteomic analysis showed that Methanosarcina and Methanomethylovorans enzymes in anaerobic sludge metabolized dimethylamine and methylamine to methane, aiding DMF degradation. In the aerobic sludge, aminohydrolase proteins, which hydrolyze DMF, were significantly upregulated. These findings provide insights into DMF wastewater treatment.

Effect of micro-granular activated carbon on bacteriophage MS2 removal and fouling control in flat-plate MBR

Pathogenic microorganisms pose a severe risk to the aquatic environment and human health. Membrane bioreactors (MBRs) have attracted much attention due to their simultaneous biological treatment and virus retention, but membrane fouling is the main obstacle. This study explored the effect of micro-granular activated carbon (μGAC) on bacteriophage MS2 removal efficiency and membrane fouling in a flat-plate MBR. The results showed that the μGAC addition with a particle size of 180-300 μm improved the removal of MS2 (LRVMBR of 4.77 log) and enhanced the removal of COD and ammonia nitrogen. The μGAC integrated MBR (μGAC-MBR) exhibited a higher MS2 retention rate by the membrane filter layers with an average LVRMem of 2.03 log compared to that of a control reactor (C-MBR) of 1.89 log. Meanwhile, the total membrane filter layer resistance of μGAC-MBR was significantly lower than that of C-MBR, particularly in terms of cake layer resistance and organic pore-blocking exclusion. The μGAC addition slightly reduced MS2 adsorption by the activated sludge while significantly altering the extracellular polymeric substances (EPS) profiles. The fluorescent components in the bound EPS and PN/PS ratio of the activated sludge were reduced. We found that μGAC enhanced membrane surface roughness and hydrophilicity. Notably, the μGAC significantly influenced the quorum sensing (QS) systems, reducing the abundance and synthesis of AHL-related genes. The synthase luxI in the AHL-QS system was reduced by 93.21% in μGAC-MBR. The AHL-QS system is closely related to biofilm formation, and the total EPS of the surface filer layer of μGAC-MBR decreased by 57.73%, and PN in LB-EPS and TB-EPS decreased by 91.33% and 54.44% compared with C-MBR, indicating a significant reduction in biofilm formation. This study exhibited a new perspective on promoting MS2 removal with the synergistic effect of alleviating fouling in the MBR process.

How biofilm and granular sludge cope with dissolved oxygen exposure in anammox process: Performance, bioaccumulation characteristics and bacterial evolution

In order to study the resistance mechanisms of biofilm and granular sludge to various dissolved oxygen (DO) exposures in anaerobic ammonium oxidation (anammox) process, a biofilm - granular sludge anammox reactor was established and operated. Experimental results showed that DO levels of ≤0.41 mg L-1 hardly affected the total nitrogen removal efficiency (TNRE). Higher DO levels of 1.96-2.08 mg L-1 promoted biomass disintegration and decreased specific anammox activity and extracellular polymeric substance (EPS) levels in granular sludge, but did not decrease EPS significantly in biofilm. The relative abundance of anammox genus Candidatus Kuenenia in granular sludge and biofilm decreased to 13.93% and 1.93%, respectively. NO3--N was accumulated due to the increased NOB genus Nitrospira in granular sludge and biofilm. The inhibition effects of 1.96-2.08 mg L-1 DO on anammox system were reversible, and the TNRE was quickly restored to (82.21 ± 2.39)% with AnAOB accumulation after removing aeration. This study provided theoretical support for the development of coupled biological nitrogen removal system based on anammox with other aerobic processes.

Amorphous Cu/Fe nanoparticles with tandem intracellular and extracellular electron capacity for enhancing denitrification performance and recovery of co-contaminant suppressed denitrification

In this study, a functionally stable insoluble Cu/Fe nanoparticles (Cu/Fe NPs) were synthesized and applied denitrification with different contaminants. The results showed that 50 mg/L Cu/Fe NPs increased NO3--N reduction rate up to 14.3 mg/(L·h) about 3 folds compared with the control system (4.7 mg/(L·h)), and Cu/Fe NPs exhibited excellent restorative effects on NO3--N reduction under the stress of Cd2+, Nitrovin and Methyl Orange. Meanwhile, electrochemical analyses, enzyme activities, and related genes abundance together showed that pilus, cytochrome c and flavin mononucleotide were electron carriers to tandem extracellular and intracellular, increasing electron flux acting on NO3--N in the respiratory chain. Metagenomic sequencing showed that microbial metabolic activity, electroactive bacteria (EAB) abundance with bi-directional electron transfer and Cu/Fe-compatible bacterial abundance were increased. Furthermore, denitrification performance was maintained by establishing C-EAB-Cu/Fe NPs cycling network. This study provided insights and applications for expanding the use of insoluble mediators in denitrification systems.

The interaction between sludge and microplastics during thermal hydrolysis of sludge

In municipal wastewater treatment plants (WWTPs), large number of microplastics (MPs) accumulated in wastewater migrated into sludge. Thermal hydrolysis of sludge (THS) was one of the most promising processes for promoting changes in molecular structure of MPs. The physicochemical properties and degradative pathways of polyethylene (PE) and polyethylene terephthalate (PET) in THS under different temperatures were studied in this paper. It was found that there was a mutual promotion relationship between sludge degradation and MPs aging. The presence of PE and PET MPs not only increased organics and nitrogen concentrations of sludge filtrate, but also enhanced the transformation of organics like proteins. Sludge accelerated the aging of PE and PET MPs. The friability of PE and PET MPs was increased with more surface fragmentation and breakage under the temperature of 120 ℃-180 ℃. Moreover, PE and PET MPs occurred thermal oxidation and reduction reactions with significant chemical structure changes at 160 °C and 140 °C, respectively. Pristine PE and PET had multiple carbon and oxygen active sites. During THS reaction, not only PE and PET reacted hydrolysis/decomposition to produce short-chain hydroxyl-terminated compounds, but also hydrothermal shear broke the polymer molecules and formed carboxyl-terminated and olefin-terminated low-carbon chains. This study provided some promising sign for in situ microplastic removal during sludge treatments.

Insight into continuous-flow partial nitrification granular sludge system: Long-term performance, formation mechanism, and partial nitrification granular sludge/Anammox coupled system for mature landfill leachate treatment

A continuous-flow partial nitrification granular sludge (PNGS) coupled Anammox system was constructed for mature landfill leachate (MLL) treatment. Stable NO2--N accumulation was achieved with NH4+-N to NO2--N transformation ratio (NTR) of 98-100 % with influent NH4+-N ranged from 342 ± 29 to 1106 ± 20 mg/L. When treating MLL, particular acyl homoserine lactones (AHLs), cyclic dimeric guanosine monophosphate (c-di-GMP) concentration significantly increased and more extracellular polymeric substances (EPS) were secreted, which adsorbed refractory organics and embedded SiO2 derived from MLL for granulation. A strong and positive correlation was found between PNGS average diameter and EPS, indicating that AHLs and c-di-GMP may play a significant role in the formation and evolution of PNGS via regulating EPS secretion. The PNGS/Anammox system could remove COD and nitrogen simultaneously under different MLL loadings, with COD and total inorganic nitrogen removal efficiency of 28 ± 5 %-71 ± 2 % and 66 ± 2 %-89 ± 1 %, respectively.

Continuous self-circulating up-flow granular sludge fluidized bed process treating low-strength real municipal wastewater at high hydraulic loads

Conditions conducive to aerobic granular sludge (AGS) growth and maintenance are very difficult to realize in continuous-flow biological treatment processes. This study conducted a continuous-flow self-circulating up-flow granular sludge fluidized bed (Zier process) treating real urban wastewater approximately one year. The substantial self-circulating multiple times (RSCMT, 8-15 times) and up-flow velocity (8-15 m/h) generated by aeration, the only power equipment in Zier process, facilitated pollutant removal, particle granulation and stabilization. With hydraulic retention time of 5 h, RSCMT of 9.3-14.4 times and chemical oxygen demand (COD)/total nitrogen (TN) ratio of 5.9 ± 1.0, the effluent COD, ammonia nitrogen and TN were 28.6 ± 7.7, 1.1 ± 1.2, and 13.3 ± 1.7 mg/L, respectively. The median particle size was 150-250 μm and effluent suspended solids concentration was 33.4 ± 14.5 mg/L. It is unnecessary to set up sludge reflux which simplifies the subsequent mud-water separation facilities. The Zier process provides a new process structure for implementation of continuous-flow AGS process.

Biodegradation of organosulfur with extra carbon source: Insights into biofilm formation and bacterial metabolic processes

Organosulfur compounds are prevalent in wastewater, presenting challenges for biodegradation, particularly in low-carbon environments. Supplementing additional carbon sources not only provides essential nutrients for microbial growth but also serves as regulators, influencing adaptive changes in biofilm and enhancing the survival of microorganisms in organosulfur-induced stress bioreactors. This study aims to elucidate the biodegradation of organosulfur under varying carbon source levels, placing specific emphasis on functional bacteria and metabolic processes. It has been observed that higher levels of carbon supplementation led to significantly improved total sulfur (TS) removal efficiencies, exceeding 83 %, and achieve a high organosulfur CH3SH removal efficiency of ~100 %. However, in the reactor with no external carbon source added, the oxidation end-product SO42- accumulated significantly, surpassing 120 mEq/m2-day. Furthermore, the TB-EPS concentration consistently increasedwith the ascending glucose concentration. The analysis of bacterial community reveals the enrichment of functional bacteria involved in sulfur metabolism and biofilm formation (e.g. Ferruginibacter, Rhodopeudomonas, Gordonia, and Thiobacillus). Correspondingly, the gene expressions related to the pathway of organosulfur to SO42- were notably enhanced (e.g. MTO increased by 27.7 %). In contrast, extra carbon source facilitated the transfer of organosulfur into amino acids in sulfur metabolism and promoted assimilation. These metabolic insights, coupled with kinetic transformation results, further validate distinct sulfur pathways under different carbon source conditions. The intricate interplay between bacteria growth regulation, pollutant biodegradation, and microbial metabolites underscores a complex network relationship that significantly contributes to efficient operation of bioreactors.

Different nitrogen conditions regulating extracellular polymeric substances and erosion resistance of sewer sediment: Mechanism of microbial metabolism and molecular response

Nitrogen biotransformation plays a vital role in the metabolism of microbial communities in sewers. Extracellular polymeric substances (EPS) secreted by microbial communities can form gel-like sewer sediments, causing clogging of the sewer. However, knowledge on the effects of varying nitrogen conditions on the erosion resistance of sewer sediments and EPS produced by sewer microorganisms is limited. In this study, two typical organic/inorganic nitrogen ratios of sewage were reproduced in simulated sewer reactors, i.e., 3/7 (R1 group) and 7/3 (R2 group). Higher organic nitrogen (ON) concentrations were found to increase the critical erosion shear stress by 26.43%; this was ascribed to increased particle diameter, weakened electrostatic repulsion of sediments and stimulated EPS secretion in the R2 group. The protein and polysaccharide contents of the R2 group were 48.84% and 34.25% higher than those of the R1 group, respectively, which was supported by increased gene abundances for aromatic amino acid synthesis, general secretory pathways of protein, and synthesis of precursors and polysaccharides. Tightly-bound EPS in R2 group exhibited increased contents of hydrophobic protein secondary structures and intermolecular hydrogen bonds, thereby promoting the formation of gel-like sediment structures with enhanced erosion resistance. However, the microbial diversity and the abundance of key genes involved in EPS generation and secretion (e.g., tyrB, yajC, secB, gumF, and gumH) obviously decreased in the R1 group. Moreover, high ON concentrations increased microbial diversity and enhanced microbial glycolysis, tricarboxylic acid cycle and ammonium assimilation. This study reveals the formation mechanisms of EPS in sewer sediments under different nitrogen conditions and their effects on sediment erosion resistance, which contributed to improved sewer system operation and sewer sediment control.

New insights into the improved contaminants removal in SBR by intermittently weak ultrasound

The combination of intermittently weak ultrasound and sequencing batch reactor was thoroughly investigated to elucidate the relationship between enhanced contaminants removal and activated sludge characteristics, microbial composition, and regulation of differentially expressed genes (DEGs). At 12 °C, irradiation with an ultrasound intensity of 9.68 W/L, an irradiation time of 10 min, and an interval time of 24 h led to significant increases in COD, NH4+-N, and TP removals with the rates of 93.10 ± 1.51%, 95.75 ± 0.76%, and 92.52 ± 0.95%, respectively. The intermittently weak ultrasound enhanced contaminants removal was primarily attributed to the stimulated microbial metabolism, in which the mechanical oscillation rather than free radical oxidation facilitated the loosening of activated sludge flocs and promoted microorganism proliferation. Elevating the ultrasound intensity or irradiation time could weaken the effect of enhancing ammonia-oxidizing bacteria activity and suppressing nitrite-oxidizing bacteria activity. The results revealed that intermittently weak ultrasound primarily affected the extracellular polymeric substances (EPS), with protein nitrogen playing a more significant role than polysaccharide within EPS against ultrasound-induced stress. Furthermore, ultrasound irradiation elevated the energy barrier in total-binding EPS interaction energy curves, thereby inhibiting activated sludge aggregation. Over prolonged operation, the relative abundance of the prevalent denitrifying genus Thauera increased by 90.3%, whereas that of the fully aerobic denitrifier and nitrite producer Dokdonella increased by 68.7%. The intermittently weak ultrasound induced enhancement of microbial metabolism-related DEGs pathways, which served as the main contributor to the improved contaminants removal. These findings provide novel insights into the mechanisms by which intermittently weak ultrasound enhances the effectiveness of biological wastewater treatment.

Inhibition of zinc ions in sulfur-driven autotrophic denitrification process: What is the behavior of extracellular polymeric substances?

Sulfur-driven autotrophic denitrification (SAD) process is a cost-effective and sustainable method for nitrogen removal from wastewater. However, a higher concentration of zinc ions (Zn(II)) flowing into wastewater treatment plants poses a potential threat to the SAD process. This study examined that a half maximal inhibitory concentration (IC50) of Zn(II) was 7 mg·L-1 in the SAD process. Additionally, the addition of 20 mg·L-1 Zn(II) resulted in a severe accumulation of nitrite to 150.20 ± 6.00 mg·L-1 when the initial concentration of nitrate was 500 mg·L-1. Moreover, the activities of nitrate reductase, nitrite reductase, dehydrogenase and electron transport system were significantly inhibited under Zn(II) stress. The addition of Zn(II) inhibited EPS secretion and worsened electrochemical properties. The result was attributed to the spontaneous binding between EPS and Zn(II), with a ΔG of -17.50 KJ·mol-1 and a binding constant of 1.77 × 104 M-1, respectively. Meanwhile, the protein, fulvic acid, and humic-like substances occurred static quenching after Zn(II) addition, with -OH and -C=O groups providing binding sites. The binding sequence was fulvic acid→protein→humic acid and -OH → -C=O. Zn(II) also reduced the content of α-helix, which was unfavorable for electron transfer. Additionally, the Zn(II) loosened protein structure, resulting in a 50 % decrease in α-helix/(β-sheet+random coil). This study reveals the effect of Zn(II) on the SAD process and enhances our understanding of EPS behavior under metal ions stress.

The perfluorooctanoic acid accumulation and release from pipelines promoted growth of bacterial communities and opportunistic pathogens with different antibiotic resistance genes in drinking water

The spread of opportunistic pathogens (OPs) and antibiotic resistance genes (ARGs) through drinking water has already caused serious human health issues. There is also an urgent need to know the effects of perfluorooctanoic acid (PFOA) on OPs with different ARGs in drinking water. Our results suggested that PFOA accumulation and release from the pipelines induced its concentration in pipelines effluents increase from 0.03 ± 0.01 μg/L to 0.70 ± 0.01 μg/L after 6 months accumulation. The PFOA also promoted the growth of Hyphomicrobium, Microbacterium, and Bradyrhizobium. In addition, PFOA accumulation and release from the pipelines enhanced the metabolism and tricarboxylic acid (TCA) cycle processes, resulting in more extracellular polymeric substances (EPS) production. Due to EPS protection, Pseudomonas aeruginosa and Legionella pneumophila increased to (7.20 ± 0.09) × 104 gene copies/mL, and (8.85 ± 0.11) × 102 gene copies/mL, respectively. Moreover, PFOA also enhanced the transfer potential of different ARGs, including emrB, mdtB, mdtC, mexF, and macB. The main bacterial community composition and the main OPs positively correlated with the main ARGs and mobile genetic elements (MGE)-ARGs significantly. Therefore, PFOA promoted the propagation of OPs with different ARGs. These results are meaningful for controlling the microbial risk caused by the OPs with ARGs and MGE-ARGs in drinking water.

Novel insights into the biological state in algal-bacterial granular sludge granulation: Armor-like protection provided by the algal barrier

Algal-bacterial granular sludge (ABGS) composed of microalgae and aerobic granular sludge, is a sustainable and promising technology for wastewater treatment. However, the formation mechanism of ABGS has not been clearly defined, and the direct formation of ABGS in saline wastewater has rarely been investigated. This study proposed novel insights into the granulation process of ABGS by assembling the algal barrier, which was successfully cultivated directly in saline wastewater. The results concluded that ABGS with the algal barrier maintained a higher biomass (MLSS of 7046 ± 61 mg/L), larger particle sizes (1.21 ± 0.06 mm), and better settleability (SVI30 of 46 ± 1 mL/g), enabling efficient pollutants removal. Soluble microbial products (SMP) were found to be closely related to the emergence of the algal barrier. In addition, under salinity stress, the high production of extracellular polymeric substances (EPS, 133.70 ± 1.40 mg/g VSS), specifically TB-EPS (90.29 ± 1.12 mg/g VSS), maintained a crucial role in the formation of ABGS. Further analysis indicated that biofilm producing bacteria Pseudofulvimonas and filamentous eukaryote Streptophyta were the key players in ABGS formation with the algal barrier. Furthermore, the enhancement of key genes and enzymes involved in nitrogen metabolism, TCA cycle, and polysaccharide metabolism suggested a more robust protective effect provided by the algal barrier. This study is expected to advance the application of simultaneous ABGS formation and pollutant removal in wastewater.

Microbial response to the chronic toxicity effect of graphene and graphene oxide nanomaterials within aerobic granular sludge systems

Nanomaterials present in wastewater can pose a significant threat to aerobic granular sludge (AGS) systems. Herein, we found that compared to graphene nanomaterials (G-NMs), the long-term presence (95 days) of graphene oxide nanomaterials (GO-NMs) resulted in an increased proliferation of filamentous bacteria, poorer sedimentation performance (SVI30 of 74.1 mL/g) and smaller average particle size (1224.4 µm) of the AGS. In particular, the GO-NMs posed a more significant inhibitory effect to the total nitrogen removal efficiency of AGS (decreased by 14.3 %), especially for the denitrification process. The substantial accumulation of GO-NMs within the sludge matrix resulted in a higher level of reactive oxygen species in AGS compared to G-NMs, thereby inducing lactate dehydrogenase release, and enhancing superoxide oxidase and catalase activities. Such excessive oxidative stress could potentially result in a significant reduction in the activity of nitrogen metabolism enzymes (e.g., nitrate reductase and nitrite reductase) and the expression of key functional genes (e.g., nirS and nirK). Altogether, compared to G-NMs, prolonged exposure to GO-NMs had a more significant chronic toxicity effect on AGS systems. These findings implied that the presence of G-NMs and GO-NMs is a hidden danger to biological nitrogen removal and should receive more attention.

Insights into the removal of antibiotics from livestock and aquaculture wastewater by algae-bacteria symbiosis systems

With the burgeoning growth of the livestock and aquaculture industries, antibiotic residues in treated wastewater have become a serious ecological threat. Traditional biological wastewater treatment technologies-while effective for removing conventional pollutants, such as organic carbon, ammonia and phosphate-struggle to eliminate emerging contaminants, notably antibiotics. Recently, the use of microalgae has emerged as a sustainable and promising approach for the removal of antibiotics due to their non-target status, rapid growth and carbon recovery capabilities. This review aims to analyse the current state of antibiotic removal from wastewater using algae-bacteria symbiosis systems and provide valuable recommendations for the development of livestock/aquaculture wastewater treatment technologies. It (1) summarises the biological removal mechanisms of typical antibiotics, including bioadsorption, bioaccumulation, biodegradation and co-metabolism; (2) discusses the roles of intracellular regulation, involving extracellular polymeric substances, pigments, antioxidant enzyme systems, signalling molecules and metabolic pathways; (3) analyses the role of treatment facilities in facilitating algae-bacteria symbiosis, such as sequencing batch reactors, stabilisation ponds, membrane bioreactors and bioelectrochemical systems; and (4) provides insights into bottlenecks and potential solutions. This review offers valuable information on the mechanisms and strategies involved in the removal of antibiotics from livestock/aquaculture wastewater through the symbiosis of microalgae and bacteria.

Removal of dibutyl phthalate (DBP) by bacterial extracellular polymeric substances (EPS) via enzyme catalysis and electron transmission

Phthalic acid esters (PAEs) showed high environmental risk due to the widely existence and toxicity. Microbial-excreted extracellular polymeric substances (EPS) showed potential of degrading organic compounds. In this study, the degradation ability and the mechanisms of EPS from two bacteria (PAEs degrader Gordonia sihwensis; electrochemically active strain Shewanella oneidensis MR-1) were investigated. Results showed that EPS of the two bacteria had different composition of C-type cytochromes, flavins, catalase, and α-glucosidase. The removal of dibutyl phthalate (DBP) by total EPS were 68% of G. sihwensis and 72% for S. oneidensis. For both bacteria, the degradation rates k of EPS were as TB-EPS > LB-EPS > S-EPS. The degradation mechanisms of EPS from the two bacteria showed difference with electrochemical active components mediated electron transmission for S. oneidensis MR-1 and enzymes catalysis for G. sihwensis. Results of this study illustrated the variation of the contribution of active components of EPS to degradation.

The effect of salinity on trimethoprim adsorption by activated sludge extracellular polymeric substances at trace concentration

The saline wastewater produced in industrial activities and seawater use would flow into wastewater treatment plants and affect the characteristic of extracellular polymeric substance (EPS) of activated sludge, which could potentially impact the removal of antibiotics via adsorption. Nonetheless, the effect of salinity on trimethoprim adsorption by activated sludge extracellular polymeric substances at trace concentration and the underlying mechanism remain largely unknown. In this study, the effect of salinity on the adsorption removal of a typical antibiotic, i.e., trimethoprim (TMP) at trace concentration (25.0 μg/L) was evaluated. The results showed the content of EPS was decreased significantly from 56.36 to 21.70 mg/g VSS when the salinity was increased from 0 to 10 g/L. Protein fractions occupied the predominant component of EPS, whose concentration was decreased from 38.17 to 12.83 mg/g VSS. The equilibrium adsorption capacity of activated sludge for TMP was decreased by 49.70% (from 4.97 to 2.50 μg/g VSS). The fluorescence quenching results indicated the fluorescence intensity of tryptophan-like substances was decreased by 30% and the adsorption sites of EPS were decreased from 0.51 to 0.21 when the salinity was increased. The infrared spectrum and XPS results showed that the nitrogen-containing groups from protein were decreased significantly. The circular dichroic analysis showed α helix structure of protein in EPS was decreased with the increase of salinity, which was responsible for the decrease of adsorption capacity for TMP.

Removal of organic matter from food wastewater using anaerobic digestion at low temperatures enhanced by exogenous signaling molecule N-hexanoyl-homoserine lactone enhancement: Insight to extracellular polymeric substances and key functional genes

This experiment aimed to study the effects of adding the exogenous signaling molecule N-hexanoyl-homoserine lactone (C6-HSL) on the anaerobic digestion of food wastewater at low temperature (15 °C). Daily addition of 0.4 μmol C6-HSL increased the average chemical oxygen demand removal from 45.98% to 94.92%, while intermittent addition (adding 2 μmol C6-HSL every five days) increased it from 45.98% to 72.44%. These two modes of C6-HSL addition increased protease and acetate kinase activity by 47.99%/8.04% and 123.26%/127.91% respectively, and increased coenzyme F420 concentrations by 15.79% and 63.16%, respectively. The regulation of loosely bound extracellular polymeric substances synthesis was influenced by C6-HSL, which increased protein and polysaccharide content in sludge. The relative abundance of Firmicutes and Bacteroidetes increased following addition of C6-HSL. After continuous addition of C6-HSL, the relative abundance of related functional genes such as amy, apgM, aceE, and accC increased, indicating that methanogens obtained sufficient substrate. The abundance of glycolysis-related functional genes such as glk, pfk, pgi, tpiA, gap, pgk, gpmA, eno, and pyk increased after the addition of C6-HSL, ensuring the efficient transformation and absorption of organic matter by anaerobic sludge at low temperatures. This study provides new comprehensive insights into the mechanism behind the enhancement of food wastewater anaerobic digestion by C6-HSL at low temperature.

Co-removal and recycling of Ba2+ and Ca2+ in hypersaline wastewater based on the microbially induced carbonate precipitation technique: Overlooked Ba2+ in extracellular and intracellular vaterite

This study investigates the co-precipitation of calcium and barium ions in hypersaline wastewater under the action of Bacillus licheniformis using microbially induced carbonate precipitation (MICP) technology, as well as the bactericidal properties of the biomineralized product vaterite. The changes in carbonic anhydrase activity, pH, carbonate and bicarbonate concentrations in different biomineralization systems were negatively correlated with variations in metal ion concentrations, while the changes in polysaccharides and protein contents in bacterial extracellular polymers were positively correlated with variations in barium concentrations. In the mixed calcium and barium systems, the harvested minerals were vaterite containing barium. The increasing concentrations of calcium promoted the incorporation and adsorption of barium onto vaterite. The presence of barium significantly increased the contents of O-CO, N-CO, and Ba-O in vaterite. Calcium promoted barium precipitation, but barium inhibited calcium precipitation. After being treated by immobilized bacteria, the concentrations of calcium and barium ions decreased from 400 and 274 to 1.72 and 0 mg/L (GB/T15454-2009 and GB8978-1996). Intracellular minerals were also vaterite containing barium. Extracellular vaterite exhibited bactericidal properties. This research presents a promising technique for simultaneously removing and recycling hazardous heavy metals and calcium in hypersaline wastewater.

Innovation for continuous aerobic granular sludge process in actual municipal sewage treatment: Self-circulating up-flow fluidized bed process

Aerobic granular sludge (AGS) capable of nitrogen and phosphorus removal is mainly limited to the applications in sequencing batch reactors. This study introduced an innovative continuous self-circulating up-flow fluidized bed process (Zier process) using separate aeration. The process was composed of an anoxic column (Zier-A), aeration column (Zier-OO) and aerobic column (Zier-O), and was used to treat actual municipal sewage continuously for 170 days. The process achieved self-circulation of 20-32 times and an up-flow velocity within the reactor of 7-16 m/h which were accurately controlled with only separate aeration. The larger proportion of self-circulating multiple times contributed to particle formation and stability, providing hydraulic shear conditions, and screened the precipitation performance of the granular sludge (GS). Meanwhile, the dissolved oxygen (DO) of Zier-O was controlled at 0.1-0.3 mg/L, and the DO of Zier-A input water was zero. The accurate oxygen supply enhanced simultaneous nitrification and denitrification (SND) as well as short-cut nitrification and denitrification in Zier-O and improved the COD utilization rate and the nitrogen removal rate in Zier-A. The COD treatment capacity reached 2.46 kg-COD/(m³·d). With a hydraulic retention time of 10 h, the process consistently ensured that the average concentrations of ammonia nitrogen and total nitrogen in the effluent were maintained below 5 and 15 mg/L, respectively. Moreover, the process maintained the shape and stability of GS, the median diameter of GS ranged between 300-1210 μm, the percentage of mass with particle size distribution < 200 μm at a height of 150 cm within Zier-A and Zier-O accounted for as low as 0.04%-0.05%, and showed good settling performance. The suspended solids in effluent can be maintained at 50-80 mg/L. Overall, the unique structural setting and control method of the Zier process provide another approach for the application of continuous AGS treatment for municipal sewage.

Engineered Probiotic Bio-Heterojunction with Robust Antibiofilm Modality via "Eating" Extracellular Polymeric Substances for Wound Regeneration

The compact three-dimensional (3D) structure of extracellular polymeric substances (EPS) within biofilms significantly hinders the penetration of antimicrobial agents, making biofilm eradication challenging and resulting in persistent biofilm-associated infections. To address this challenge, a solution is proposed: a probiotic bio-heterojunction (P-bioHJ) combining Lactobacillus rhamnosus with MXene (Ti3C2) quantum dots (MQDs)/FeS heterojunction. This innovation aims to break down the saccharides in EPS, enabling effective combat against biofilm-associated infections. Initially, the P-bioHJ targets saccharides through metabolic processes, causing the collapse of EPS and allowing infiltration into bacterial colonies. Simultaneously, upon exposure to near-infrared (NIR) irradiation, the P-bioHJ produces reactive oxygen species (ROS) and thermal energy, deploying physical mechanisms to combat bacterial biofilms effectively. Following antibiofilm treatment, the P-bioHJ adjusts the oxidative environment, reduces wound inflammation by scavenging ROS, boosts antioxidant enzyme activity, and mitigates the NF-κB inflammatory pathway, thereby accelerating wound healing. In vitro and in vivo experiments confirm the exceptional antibiofilm, antioxidant/anti-inflammatory, and wound-regeneration properties of P-bioHJ. In conclusion, this study provides a promising approach for treating biofilm-related infections.

Strengthening nitrogen removal of rural wastewater treatment in humus biochemical system under low dissolved oxygen conditions: Sludge and microbial characteristics

To achieve efficient and cost-effective treatment for the rural wastewater, a novel humus biochemical system (HBS) process derived from humus bio-functional material was proposed to treat rural wastewater under low dissolved oxygen (DO) conditions, and the operational performance, sludge characteristics, and microbial community in HBS were systematically investigated in this study. The results indicated that the HBS reactor could be operated stably under low DO levels of 0.2-0.8 mg/L, and maintained high removal efficiencies of 96.4%, 96.0%, and 88.2% for chemical oxygen demand, ammonia nitrogen, and total nitrogen, with corresponding effluent concentrations of 11.0, 1.7, and 5.1 mg/L, respectively. The sludge produced from HBS was characterized by relatively large particle size, complex structural morphology, and abundant humic substances, which favorably improved the system stability. Illumina sequencing demonstrated that HBS reactor possessed high microbial abundance and diversity and was enriched with plenty of nitrifying and denitrifying bacteria, which synergistically intensified the whole biological nitrogen removal process in this system. The study presented the feasibility and adaptability of HBS for energy-efficient rural wastewater treatment.

A novel chitosan and polyferric sulfate composite coagulant for biogas slurry pretreatment by simultaneous flocculation and floatation: Performance and underlying mechanisms

Biogas slurry from anaerobic digestion is rich in nutrients but has not been fully utilized due to a high content of suspended solids (SS) causing clogging during agricultural irrigation. This study aimed to evaluate the performance of a novel chitosan and polyferric sulfate (CTS-PFS) composite coagulant for simultaneous flocculation and floatation to enhance SS removal while preserving nutrients in biogas slurry. Orthogonal method was used for experimental design to determine the optimal synthesis and operational conditions of CTS-PFS. Results show that CTS-PFS outperformed individual CTS and PFS coagulant in terms of SS removal and nutrient (nitrogen, phosphorus, and potassium) preservation. Compared to individual CTS and PFS coagulation, the combination of CTS and PFS at the mass ratio of 1:6 showed significantly higher performance by 41.5 % increase in SS removal and 5.2 % reduction in nutrient loss. The improved performance of CTS-PFS was attributed to its formation of polynuclear hydroxyl complexes with ferric oxide groups (e.g. Fe-OH, Fe-O-Fe, Fe-OH-Fe and COO-Fe) to strengthen charge neutralization and adsorption bridging. Data from this study further confirm that CTS-PFS enhanced the removal of small suspended particles and dissolved organic matter in the molecular weight range of 0.4-2.0 kDa and preserved ammonia and potassium better in biogas slurry. Bubbles were generated as hydrogen ions from coagulant hydrolysis interacted with bicarbonate and carbonate in biogas slurry for removing the produced flocs by floatation. Floc flotation was more effective in CTS-PFS coagulation due to the significant production of uniform bubbles, evidenced by the reduction in the viscosity of biogas slurry.

Natural flocculant chitosan inhibits short-chain fatty acid production in anaerobic fermentation of waste activated sludge

Chitosan (CTS) serves as an excellent natural flocculant in wastewater purification and sludge conditioning, but its potential impact on anaerobic fermentation of waste-activated sludge is unclear. The current study investigated the role of CTS in short-chain fatty acids (SCFAs) generation via sludge alkaline anaerobic fermentation. The results showed a drastic reduction in SCFA production with CTS, showing a maximum inhibition of 33 % at 6 mg/g of total suspended solids. CTS hindered sludge solubilization through flocculation, and acted as a humus precursor, promoting humus formation, and consequently reduced the amount of available substrates. Further, CTS promoted free ammonia production, posing a challenge to enzymes and cell viability. Additionally, CTS increased the population of Rikenellaceae sp. and weakened the dominance of hydrolyzing and acidifying bacteria. This study deepens the understanding of the potential impact of CTS on anaerobic fermentation and provides a theoretical basis for reducing the risk of polymeric flocculants.

The fate of pharmaceuticals and personal care products (PPCPs) in sewer sediments:Adsorption triggering resistance gene proliferation

In recent years, large quantities of pharmaceuticals and personal care products (PPCPs) have been discharged into sewers, while the mechanisms of PPCPs enrichment in sewer sediments have rarely been revealed. In this study, three PPCPs (tetracycline, sulfamethoxazole, and triclocarban) were added consecutively over a 90-day experimental period to reveal the mechanisms of PPCPs enrichment and the transmission of resistance genes in sewer sediments. The results showed that tetracycline (TC) and triclocarban (TCC) have higher adsorption concentration in sediments compared to sulfamethoxazole (SMX). The absolute abundance of Tets and suls genes increased in sediments under PPCPs pressure. The increase in secretion of extracellular polymeric substances (EPS) and the loosening of the structure exposed a large number of hydrophobic functional groups, which promoted the adsorption of PPCPs. The absolute abundance of antibiotic resistance genes (ARGs), EPS and the content of PPCPs in sediments exhibited significant correlations. The enrichment of PPCPs in sediments was attributed to the accumulation of EPS, which led to the proliferation of ARGs. These findings contributed to further understanding of the fate of PPCPs in sewer sediments and opened a new perspective for consideration of controlling the proliferation of resistance genes.