Rewiring carbon flux in Escherichia coli using a bifunctional molecular switch

Rational metabolic engineering of Escherichia coli for the industrial-scale production of l-phenylalanine

Rational metabolic engineering has numerous applications in the optimization of microorganisms for the production of valuable compounds at the laboratory-scale. However, the existing strategies and tools are far from sufficient for engineering of industrial strains due to their specificity. The aim of this project was to implement novel strategies to enhance industrial l-phenylalanine (l-PHE) production and yield, including the regulation of key gene expressions, modifications of global transcription factors, creation of NADPH-independent pentose phosphate pathway and pyruvate-oxaloacetate-phosphoenolpyruvate cycle. The project also involved the identification and engineering of novel byproduct pathways and the development of a tyrosine-nonauxotrophic strain. Through comprehensive rational engineering, an industrial l-PHE producer, designated PHE17, achieved the highest production (103.15 g/L) and yield (0.229 g/g) of l-PHE reported thus far. This study also represents the first report on the iterative engineering of industrial l-PHE producers, thereby offering great significance for the engineering of other aromatic animo acids-producing strains.

High-Yield Biosynthesis of 3-Hydroxypropionic Acid from Acetate in Metabolically Engineered Escherichia coli

The third-generation biorefineries aimed at "carbon-negative" production of fuels and chemicals utilizing one-carbon molecules and renewable energy sources were raised to tackle the pressing climate change and food scarcity issues. Acetate derived from syngas fermentation, a viable nonfood carbon source, has recently been elevated in bulk chemicals biosynthesis. In this study, we successfully engineered Escherichia coli to produce 3-hydroxypropionic acid (3-HP) from acetate via the malonyl-CoA pathway. Initially, the constitutive promoter of the 3-HP biosynthetic pathway for efficient 3-HP production was screened in acetate-based medium. Then, efforts were focused on reducing the competition for malonyl-CoA by inhibiting the fatty acids (FAs) synthesis pathway. Furthermore, we enhanced the supply of NADPH and acetyl-CoA through cofactor engineering. The engineered strain ZWR18(M*DA) accumulated 5.53 g/L 3-HP, corresponding to a yield of 0.732 g/g, and achieved 97.60% of the theoretical yield. In whole-cell catalysis, ZWR18(M*DA) produced 23.89 g/L 3-HP with a yield of 0.734 g/g, reaching 97.87% of the theoretical yield. Utilizing syngas-derived acetate for whole-cell catalysis allowed ZWR18(M*DA) to accumulate 18.87 g/L 3-HP with a yield of 0.58 g/g. These results indicate that acetate from syngas can serve as a cost-effective and environmentally friendly alternative to traditional carbon sources, offering a sustainable biorefinery pathway for industrial biomanufacturing.

Multistep Metabolic Engineering of Escherichia coli for High-Level Ectoine Production

Ectoine is an important natural macromolecule protector that helps extremophiles maintain cellular stability and function under high-salinity conditions. Recently, the development of microbial strains for high-level ectoine production has become an attractive research direction. In this study, we constructed an efficient plasmid-free ectoine-producing strain. We modified the 5'-untranslated region of the ectABC gene cluster from Halomonas elongate to fine-tune the expression of genes ectA, ectB, and ectC. Furthermore, we optimized the carbon flow across the MEP pathway, the TCA cycle, and the aspartic acid metabolic pathway. Subsequently, we blocked the production of byproducts from the aspartic acid metabolic pathway and dynamically regulated the TCA cycle to coordinate the balance between strain growth and production. The final strain was tested in a 5-L fermenter, which reached 118.5 g/L at 114 h of fermentation. The metabolic engineering strategies employed in this study can be used for the biosynthesis of other aspartate derivatives.

Metabolic Regulation and Engineering Strategies of Carbon and Nitrogen Metabolism in Escherichia coli

The intricacies of carbon and nitrogen metabolism in Escherichia coli indeed present both challenges and opportunities for metabolic engineering aimed at optimizing microbial production processes. Carbon is the primary energy source and building block for biomolecules at the cellular level, while nitrogen is vital for synthesizing amino acids, nucleotides, and other nitrogen-containing compounds. This review provides a comprehensive summary of the metabolic regulation of central metabolism and outlines engineering strategies for carbon and nitrogen metabolism in E. coli. This perspective enhances our understanding of the molecular mechanisms involved and enables the development of rational metabolic engineering strategies. One key aspect of metabolic engineering consists of understanding the regulatory networks that govern these processes. Both carbon and nitrogen metabolisms are tightly regulated to ensure cellular homeostasis. By elucidating the interconnected nature of carbon and nitrogen metabolism, this review serves not just to better inform the academic community but also to stimulate advancements in biotechnological applications. Metabolic engineering in E. coli, targeting these complex networks, holds immense promise for the sustainable production of chemicals, biofuels, and pharmaceuticals.

Microbial engineering for monocyclic aromatic compounds production

Aromatic compounds serve pivotal roles in plant physiology and exhibit antioxidative and antimicrobial properties, leading to their widespread application, such as in food preservation and pharmaceuticals. However, direct plant extraction and petrochemical synthesis often struggle to meet current needs due to low yield or facing economic and environmental hurdles. In the past decades, systems metabolic engineering enabled eco-friendly production of various aromatic compounds, with some reaching industrial levels. In this review, we highlight monocyclic aromatic chemicals, which have relatively simple structures and are currently the primary focus of microbial synthesis research. We then discuss systems metabolic engineering at the enzyme, pathway, cellular, and bioprocess levels to improve the production of these chemicals. Finally, we overview the current limitations and potential resolution strategies, aiming to provide reference for future studies on the biosynthesis of aromatic products.

Dynamic control of the plasmid copy number maintained without antibiotics in Escherichia coli

BACKGROUND

Manipulating the gene expression is the key strategy to optimize the metabolic flux. Not only transcription, translation, and post-translation level control, but also the dynamic plasmid copy number (PCN) control has been studied. The dynamic PCN control systems that have been developed to date are based on the understanding of origin replication mechanisms, which limits their application to specific origins of replication and requires the use of antibiotics for plasmid maintenance. In this study, we developed a dynamic PCN control system for Escherichia coli that is maintained without antibiotics. This is achieved by regulating the transcription level of the translation initiation factor IF-1 (infA), an essential gene encoded on the plasmid, while deleting it from the plasmid-bearing host cell.

RESULTS

When validated using GFP as a reporter protein, our system demonstrated a 22-fold dynamic range in PCN within the CloDF13 origin. The system was employed to determine the optimal copy number of the plasmid carrying the cad gene, which converts an intermediate of the tricarboxylic acid cycle (TCA cycle) to itaconic acid. By optimizing the PCN, we could achieve an itaconic acid titer of 3 g/L, which is 5.3-fold higher than the control strain.

CONCLUSIONS

Our system offers a strategy to identify the optimal expression level of genes that have a competitive relationship with metabolic pathways crucial for the growth of the host organism. This approach can potentially be applied to other bacterial hosts by substituting the sensing module or the essential gene.

Metabolic network rewiring and temperature-dependent regulation for enhanced 3-dehydroshikimate production in Escherichia coli

The cyclohexane organic acid 3-dehydroshikimate (DHS) has potent antioxidant activity and is widely utilised in chemical and pharmaceutical industries. However, its production requires a long fermentation with a suboptimal yield and low productivity, and a disproportionate growth-to-production ratio impedes the upscaling of DHS synthesis in microbial cell factories. To overcome these limitations, competing and degradation pathways were knocked-out and key enzymes were balanced in an engineered Escherichia coli production strain, resulting in 12.2 g/L DHS. Furthermore, to achieve equilibrium between cell growth and DHS production, a CRISPRi-based temperature-responsive multi-component repressor system was developed to dynamically control the expression of critical genes (pykF and aroE), resulting in a 30-fold increase in DHS titer. After 33 h fermentation in 5 L bioreactor, the DHS titer, productivity and yield reached 94.2 g/L, 2.8 g/L/h and 55 % glucose conversion, respectively. The results provided valuable insight into the production of DHS and its derivatives.

Relieving metabolic burden to improve robustness and bioproduction by industrial microorganisms

Metabolic burden is defined by the influence of genetic manipulation and environmental perturbations on the distribution of cellular resources. The rewiring of microbial metabolism for bio-based chemical production often leads to a metabolic burden, followed by adverse physiological effects, such as impaired cell growth and low product yields. Alleviating the burden imposed by undesirable metabolic changes has become an increasingly attractive approach for constructing robust microbial cell factories. In this review, we provide a brief overview of metabolic burden engineering, focusing specifically on recent developments and strategies for diminishing the burden while improving robustness and yield. A variety of examples are presented to showcase the promise of metabolic burden engineering in facilitating the design and construction of robust microbial cell factories. Finally, challenges and limitations encountered in metabolic burden engineering are discussed.

Fine-Tuning Pyridoxal 5'-Phosphate Synthesis in Escherichia coli for Cadaverine Production in Minimal Culture Media

Cadaverine is a critical C5 monomer for the production of polyamides. Pyridoxal 5'-phosphate (PLP), as a crucial cofactor for the key enzyme lysine decarboxylase in the cadaverine biosynthesis pathway, has seen a persistent shortage, leading to limitations in cadaverine production. To address this issue, a dual-pathway strategy was implemented, synergistically enhancing both endogenous and heterologous PLP synthesis modules and resulting in improved PLP synthesis. Subsequently, a growth-stage-dependent molecular switch was introduced to balance the precursor competition between PLP synthesis and cell growth. Additionally, a PLP sensor-based negative feedback circuit was constructed by integrating a newly identified PLP-responsive promoter PygjH and an arabinose-regulated system, dynamically regulating the expression of the PLP synthetic genes and preventing excessive intracellular PLP accumulation. The optimal strain, L18, cultivated in the minimal medium AM1, demonstrated cadaverine production with a titer, yield, and productivity of 64.03 g/L, 0.23 g/g glucose, and 1.33 g/L/h, respectively. This represents the highest titer reported to date in engineered Escherichia coli by fed-batch fermentation in a minimal medium.

Reprogramming Metabolic Flux in Escherichia Coli to Enhance Chondroitin Production

Reprogramming metabolic flux is a promising approach for constructing efficient microbial cell factories (MCFs) to produce chemicals. However, how to boost the transmission efficiency of metabolic flux is still challenging in complex metabolic pathways. In this study, metabolic flux is systematically reprogrammed by regulating flux size, flux direction, and flux rate to build an efficient MCF for chondroitin production. The ammoniation pool for UDP-GalNAc synthesis and the carbonization pool for UDP-GlcA synthesis are first enlarged to increase flux size for providing enough precursors for chondroitin biosynthesis. Then, the ammoniation pool and the carbonization pool are rematched using molecular valves to shift flux direction from cell growth to chondroitin biosynthesis. Next, the adaptability of polymerization pool with the ammoniation and carbonization pools is fine-tuned by dynamic and static valve-based adapters to accelerate flux rate for polymerizing UDP-GalNAc and UDP-GlcA to produce chondroitin. Finally, the engineered strain E. coli F51 is able to produce 9.2 g L-1 chondroitin in a 5-L bioreactor. This strategy shown here provides a systematical approach for regulating metabolic flux in complex metabolic pathways for efficient biosynthesis of chemicals.

Improving Microbial Cell Factory Performance by Engineering SAM Availability

Methylated natural products are widely spread in nature. S-Adenosyl-l-methionine (SAM) is the secondary abundant cofactor and the primary methyl donor, which confer natural products with structural and functional diversification. The increasing demand for SAM-dependent natural products (SdNPs) has motivated the development of microbial cell factories (MCFs) for sustainable and efficient SdNP production. Insufficient and unsustainable SAM availability hinders the improvement of SdNP MCF performance. From the perspective of developing MCF, this review summarized recent understanding of de novo SAM biosynthesis and its regulatory mechanism. SAM is just the methyl mediator but not the original methyl source. Effective and sustainable methyl source supply is critical for efficient SdNP production. We compared and discussed the innate and relatively less explored alternative methyl sources and identified the one involving cheap one-carbon compound as more promising. The SAM biosynthesis is synergistically regulated on multilevels and is tightly connected with ATP and NAD(P)H pools. We also covered the recent advancement of metabolic engineering in improving intracellular SAM availability and SdNP production. Dynamic regulation is a promising strategy to achieve accurate and dynamic fine-tuning of intracellular SAM pool size. Finally, we discussed the design and engineering constraints underlying construction of SAM-responsive genetic circuits and envisioned their future applications in developing SdNP MCFs.

Production of D-glucaric acid with phosphoglucose isomerase-deficient Saccharomyces cerevisiae

D-Glucaric acid is a potential biobased platform chemical. Previously mainly Escherichia coli, but also the yeast Saccharomyces cerevisiae, and Pichia pastoris, have been engineered for conversion of D-glucose to D-glucaric acid via myo-inositol. One reason for low yields from the yeast strains is the strong flux towards glycolysis. Thus, to decrease the flux of D-glucose to biomass, and to increase D-glucaric acid yield, the four step D-glucaric acid pathway was introduced into a phosphoglucose isomerase deficient (Pgi1p-deficient) Saccharomyces cerevisiae strain. High D-glucose concentrations are toxic to the Pgi1p-deficient strains, so various feeding strategies and use of polymeric substrates were studied. Uniformly labelled 13C-glucose confirmed conversion of D-glucose to D-glucaric acid. In batch bioreactor cultures with pulsed D-fructose and ethanol provision 1.3 g D-glucaric acid L-1 was produced. The D-glucaric acid titer (0.71 g D-glucaric acid L-1) was lower in nitrogen limited conditions, but the yield, 0.23 g D-glucaric acid [g D-glucose consumed]-1, was among the highest that has so far been reported from yeast. Accumulation of myo-inositol indicated that myo-inositol oxygenase activity was limiting, and that there would be potential to even higher yield. The Pgi1p-deficiency in S. cerevisiae provides an approach that in combination with other reported modifications and bioprocess strategies would promote the development of high yield D-glucaric acid yeast strains.

Dietary glycerides of valerate ameliorate diarrhea and impact intestinal physiology and serum biomarkers in weaned piglets infected with enterotoxigenic Escherichia coli F18

In the commercial swine farm setting, the postweaning period is a critical window during which piglets are highly susceptible to infection and enterotoxigenic E. coli (ETEC)-associated diarrhea. Short-chain fatty acids and their glycerides are compounds that may influence intestinal health; however, valerate is one that has not been well-characterized for its role as a dietary supplement. Therefore, the major objective of this experiment was to investigate two forms of valerate glycerides on diarrhea, intestinal physiology, and systemic immunity of weaned pigs experimentally infected with ETEC F18. Dietary treatments included a control diet and three additional diets supplemented with 0.075% monovalerin, 0.1% monovalerin, or 0.1% trivalerin, respectively. Piglets were weaned (21 d to 24 d of age), individually housed, and experimental diets were fed through the 28-d trial period. After a 7-d period, all piglets were inoculated on three consecutive days with 1010 CFU ETEC F18/3 mL. Growth performance was monitored throughout the trial, and daily diarrhea scores were recorded. Rectal swabs were collected for bacterial culture to confirm the presence or absence of β-hemolytic coliforms throughout the trial. Serum samples were collected and analyzed for inflammatory biomarkers on days 0, 3, 6, and 21 postinoculation (PI) and untargeted metabolomics on day 6 PI. Intestinal mucosa and tissue sections were harvested from pigs sacrificed on day 7 PI for gene expression and histology analysis. All data, except for frequency of diarrhea and metabolomics, were analyzed by ANOVA using the PROC MIXED of SAS. Dietary trivalerin reduced (P < 0.05) the frequency of severe diarrhea over the entire trial period and the frequency of β-hemolytic coliforms on day 7 PI compared with the control. The intestinal villus height on day 7 PI in jejunum tissue was increased (P < 0.05) in pigs fed trivalerin. The mRNA expression of TNF-α was decreased (P < 0.05) in the trivalerin group, while that of ZO1 was increased (P < 0.05) compared with control. Throughout the trial, serum TNF-α was reduced in pigs fed trivalerin compared with control. Serum metabolites, adenosine, inosine, and shikimic acid were reduced (P < 0.05) on day 6 PI in all treatment groups compared with control. In conclusion, the present results indicate supplementing dietary valerate glycerides exhibited beneficial impacts on diarrhea, inflammation, and intestinal gene expression of piglets during the postweaning period.

Flux optimization using multiple promoters in Halomonas bluephagenesis as a model chassis of the next generation industrial biotechnology

Predictability and robustness are challenges for bioproduction because of the unstable intracellular synthetic activities. With the deeper understanding of the gene expression process, fine-tuning has become a meaningful tool for biosynthesis optimization. This study characterized several gene expression elements and constructed a multiple inducible system that responds to ten different small chemical inducers in halophile bacterium Halomonas bluephagenesis. Genome insertion of regulators was conducted for the purpose of gene cluster stabilization and regulatory plasmid simplification. Additionally, dynamic ranges of the multiple inducible systems were tuned by promoter sequence mutations to achieve diverse scopes for high-resolution gene expression control. The multiple inducible system was successfully employed to precisely control chromoprotein expression, lycopene and poly-3-hydroxybutyrate (PHB) biosynthesis, resulting in colorful bacterial pictures, optimized cell growth, lycopene and PHB accumulation. This study demonstrates a desirable approach for fine-tuning of rational and efficient gene expressions, displaying the significance for metabolic pathway optimization.

Design, Evaluation, and Implementation of Synthetic Isopentyldiol Pathways in Escherichia coli

Isopentyldiol (IPDO) is an important raw material in the cosmetic industry. So far, IPDO is exclusively produced through chemical synthesis. Growing interest in natural personal care products has inspired the quest to develop a biobased process. We previously reported a biosynthetic route that produces IPDO via extending the leucine catabolism (route A), the efficiency of which, however, is not satisfactory. To address this issue, we computationally designed a novel non-natural IPDO synthesis pathway (route B) using RetroPath RL, the state-of-the-art tool for bioretrosynthesis based on artificial intelligence methods. We compared this new pathway with route A and two other intuitively designed routes for IPDO biosynthesis from various perspectives. Route B, which exhibits the highest thermodynamic driving force, least non-native reaction steps, and lowest energy requirements, appeared to hold the greatest potential for IPDO production. All three newly designed routes were then implemented in the Escherichia coli BL21(DE3) strain. Results show that the computationally designed route B can produce 2.2 mg/L IPDO from glucose but no IPDO production from routes C and D. These results highlight the importance and usefulness of in silico design and comprehensive evaluation of the potential efficiencies of candidate pathways in constructing novel non-natural pathways for the production of biochemicals.

Construction of cascade circuits for dynamic temporal regulation and its application to PHB production

BACKGROUND

To maximize the production capacity and yield of microbial cell factories, metabolic pathways are generally modified with dynamic regulatory strategies, which can effectively solve the problems of low biological yield, growth retardation and metabolic imbalance. However, the strategy of dynamic regulating multiple genes in different time and order is still not effectively solved. Based on the quorum-sensing (QS) system and the principle of cascade regulation, we studied the sequence and time interval of gene expression in metabolic pathways.

RESULTS

We designed and constructed a self-induced dynamic temporal regulatory cascade circuit in Escherichia coli using the QS system and dual regulatory protein cascade and found that the time intervals of the cascade circuits based on the Tra, Las system and the Lux, Tra system reached 200 min and 150 min, respectively. Furthermore, a dynamic temporal regulatory cascade circuit library with time intervals ranging from 110 to 310 min was obtained based on this circuit using promoter engineering and ribosome binding site replacement, which can provide more selective synthetic biology universal components for metabolic applications. Finally, poly-β-hydroxybutyric acid (PHB) production was taken as an example to demonstrate the performance of the cascade circuit library. The content of PHB increased 1.5-fold. Moreover, circuits with different time intervals and different expression orders were found to have different potentials for application in PHB production, and the preferred time-interval circuit strain C2-max was identified by screening.

CONCLUSIONS

The self-induced dynamic temporal regulation cascade circuit library can enable the expression of target genes with sequential changes at different times, effectively solving the balance problem between cell growth and product synthesis in two-stage fermentation and expanding the application of dynamic regulatory strategies in the field of metabolic engineering.

Microbial engineering for shikimate biosynthesis

Shikimate, a precursor to the antiviral drug oseltamivir (Tamiflu®), can influence aromatic metabolites and finds extensive use in antimicrobial, antitumor, and cardiovascular applications. Consequently, various strategies have been developed for chemical synthesis and plant extraction to enhance shikimate biosynthesis, potentially impacting environmental conditions, economic sustainability, and separation and purification processes. Microbial engineering has been developed as an environmentally friendly approach for shikimate biosynthesis. In this review, we provide a comprehensive summary of microbial strategies for shikimate biosynthesis. These strategies primarily include chassis construction, biochemical optimization, pathway remodelling, and global regulation. Furthermore, we discuss future perspectives on shikimate biosynthesis and emphasize the importance of utilizing advanced metabolic engineering tools to regulate microbial networks for constructing robust microbial cell factories.

Recent advances in producing food additive L-malate: Chassis, substrate, pathway, fermentation regulation and application

In addition to being an important intermediate in the TCA cycle, L-malate is also widely used in the chemical and beverage industries. Due to the resulting high demand, numerous studies investigated chemical methods to synthesize L-malate from petrochemical resources, but such approaches are hampered by complex downstream processing and environmental pollution. Accordingly, there is an urgent need to develop microbial methods for environmentally-friendly and economical L-malate biosynthesis. The rapid progress and understanding of DNA manipulation, cell physiology, and cell metabolism can improve industrial L-malate biosynthesis by applying intelligent biochemical strategies and advanced synthetic biology tools. In this paper, we mainly focused on biotechnological approaches for enhancing L-malate synthesis, encompassing the microbial chassis, substrate utilization, synthesis pathway, fermentation regulation, and industrial application. This review emphasizes the application of novel metabolic engineering strategies and synthetic biology tools combined with a deep understanding of microbial physiology to improve industrial L-malate biosynthesis in the future.

Advances in biosynthesis of higher alcohols in Escherichia coli

In recent years, the development of green energy to replace fossil fuels has been the focus of research. Higher alcohols are important biofuels and chemicals. The production of higher alcohols in microbes has gained attention due to its environmentally friendly character. Higher alcohols have been synthesized in model microorganism Escherichia coli, and the production has reached the gram level through enhancement of metabolic flow, the balance of reducing power and the optimization of fermentation processes. Sustainable bio-higher alcohols production is expected to replace fossil fuels as a green and renewable energy source. Therefore, this review summarizes the latest developments in producing higher alcohols (C3-C6) by E. coli, elucidate the main bottlenecks limiting the biosynthesis of higher alcohols, and proposes potential engineering strategies of improving the production of biological higher alcohols. This review would provide a theoretical basis for further research on higher alcohols production by E. coli.

Metabolic Engineering of Microorganisms to Produce Pyruvate and Derived Compounds

Pyruvate is a hub of various endogenous metabolic pathways, including glycolysis, TCA cycle, amino acid, and fatty acid biosynthesis. It has also been used as a precursor for pyruvate-derived compounds such as acetoin, 2,3-butanediol (2,3-BD), butanol, butyrate, and L-alanine biosynthesis. Pyruvate and derivatives are widely utilized in food, pharmaceuticals, pesticides, feed additives, and bioenergy industries. However, compounds such as pyruvate, acetoin, and butanol are often chemically synthesized from fossil feedstocks, resulting in declining fossil fuels and increasing environmental pollution. Metabolic engineering is a powerful tool for producing eco-friendly chemicals from renewable biomass resources through microbial fermentation. Here, we review and systematically summarize recent advances in the biosynthesis pathways, regulatory mechanisms, and metabolic engineering strategies for pyruvate and derivatives. Furthermore, the establishment of sustainable industrial synthesis platforms based on alternative substrates and new tools to produce these compounds is elaborated. Finally, we discuss the potential difficulties in the current metabolic engineering of pyruvate and derivatives and promising strategies for constructing efficient producers.

Engineering Microorganisms to Produce Bio-Based Monomers: Progress and Challenges

Bioplastics are polymers made from sustainable bio-based feedstocks. While the potential of producing bio-based monomers in microbes has been investigated for decades, their economic feasibility is still unsatisfactory compared with petroleum-derived methods. To improve the overall synthetic efficiency of microbial cell factories, three main strategies were summarized in this review: firstly, implementing approaches to improve the microbial utilization ability of cheap and abundant substrates; secondly, developing methods at enzymes, pathway, and cellular levels to enhance microbial production performance; thirdly, building technologies to enhance microbial pH, osmotic, and metabolites stress tolerance. Moreover, the challenges of, and some perspectives on, exploiting microorganisms as efficient cell factories for producing bio-based monomers are also discussed.

Shikimic acid biosynthesis in microorganisms: Current status and future direction

Shikimic acid (SA), a hydroaromatic natural product, is used as a chiral precursor for organic synthesis of oseltamivir (Tamiflu®, an antiviral drug). The process of microbial production of SA has recently undergone vigorous development. Particularly, the sustainable construction of recombinant Corynebacterium glutamicum (141.2 g/L) and Escherichia coli (87 g/L) laid a solid foundation for the microbial fermentation production of SA. However, its industrial application is restricted by limitations such as the lack of fermentation tests for industrial-scale and the requirement of growth-limiting factors, antibiotics, and inducers. Therefore, the development of SA biosensors and dynamic molecular switches, as well as genetic modification strategies and optimization of the fermentation process based on omics technology could improve the performance of SA-producing strains. In this review, recent advances in the development of SA-producing strains, including genetic modification strategies, metabolic pathway construction, and biosensor-assisted evolution, are discussed and critically reviewed. Finally, future challenges and perspectives for further reinforcing the development of robust SA-producing strains are predicted, providing theoretical guidance for the industrial production of SA.

Systems engineering of Escherichia coli for high-level shikimate production

To further increase the production efficiency of microbial shikimate, a valuable compound widely used in the pharmaceutical and chemical industries, ten key target genes contributing to shikimate production were identified by exploiting the enzyme constraint model ec_iML1515, and subsequently used for promoting metabolic flux towards shikimate biosynthesis in the tryptophan-overproducing strain Escherichia coli TRP0. The engineered E. coli SA05 produced 78.4 g/L shikimate via fed-batch fermentation. Deletion of quinate dehydrogenase and introduction of the hydroaromatic equilibration-alleviating shikimate dehydrogenase mutant AroE^T61W/L241I reduced the contents of byproducts quinate (7.5 g/L) and 3-dehydroshikimic acid (21.4 g/L) by 89.1% and 52.1%, respectively. Furthermore, a high concentration shikimate responsive promoter P_rpoS was recruited to dynamically regulate the expression of the tolerance target ProV to enhance shikimate productivity by 23.2% (to 2 g/L/h). Finally, the shikimate titer was increased to 126.4 g/L, with a yield of 0.50 g/g glucose and productivity of 2.63 g/L/h, using a 30-L fermenter and the engineered strain E. coli SA09. This is, to the best of our knowledge, the highest reported shikimate titer and productivity in E. coli.

Efficient biosynthesis of 3-hydroxypropionic acid from ethanol in metabolically engineered Escherichia coli

Engineering microbial cell factories to convert CO₂-based feedstock into chemicals and fuels provide a feasible carbon-neutral route for the third-generation biorefineries. Ethanol became one of the major products of syngas fermentation by engineered acetogens. The key building block chemical 3-hydroxypropionic acid (3-HP) can be synthesized from ethanol by the malonyl-CoA pathway with CO₂ fixation. In this study, the effect of two ethanol consumption pathways on 3-HP synthesis were studied as well as the effect of TCA cycle, gluconeogenesis pathway, and transhydrogenase. And the 3-HP synthesis pathway was also optimized. The engineered strain synthesized 1.66 g/L of 3-HP with a yield of 0.24 g/g. Furthermore, the titer and the yield of 3-HP increased to 13.17 g/L and 0.57 g/g in the whole-cell biocatalysis system. This study indicated that ethanol as feedstock had the potential to synthesize 3-HP, which provided an alternative route for future biorefinery.

Engineering cell morphology by CRISPR interference in Acinetobacter baylyi ADP1

Microbial production of intracellular compounds can be engineered by redirecting the carbon flux towards products and increasing the cell size. Potential engineering strategies include exploiting clustered regularly interspaced short palindromic repeats interference (CRISPRi)-based tools for controlling gene expression. Here, we applied CRISPRi for engineering Acinetobacter baylyi ADP1, a model bacterium for synthesizing intracellular storage lipids, namely wax esters. We first established an inducible CRISPRi system for strain ADP1, which enables tightly controlled repression of target genes. We then targeted the glyoxylate shunt to redirect carbon flow towards wax esters. Second, we successfully employed CRISPRi for modifying cell morphology by repressing ftsZ, an essential gene required for cell division, in combination with targeted knock-outs to generate significantly enlarged filamentous or spherical cells respectively. The engineered cells sustained increased wax ester production metrics, demonstrating the potential of cell morphology engineering in the production of intracellular lipids.

Engineering microbial cell viability for enhancing chemical production by second codon engineering

Microbial cell factories offer a promising strategy for the sustainable production of industrial chemicals from renewable biomass feedstock. However, their performance is often limited by poor microbial cell viability (MCV). Here, MCV was engineered to enhance chemical production by optimizing the regulation of lifespan-specific genes to reduce the accumulation of reactive oxygen species (ROS). In Escherichia coli, MCV was improved by reducing ROS accumulation using second codon engineering to regulate hypoxia-inducible transcription factor (arcA), resulting in lysine production up to 213 g L^-1 with its productivity 5.90 g L^-1·h^-1. In Saccharomyces cerevisiae, MCV was increased by decreasing ROS accumulation using second codon engineering to fine-tune ceramide synthase (lag1), leading to glucaric acid production up to 9.50 g L^-1 with its productivity 0.057 g L^-1·h^-1. These results demonstrate that engineering MCV is a potential strategy to boost the performance of microbial cell factories in industrial processes.

Metabolic Engineering of Shikimic Acid Biosynthesis Pathway for the Production of Shikimic Acid and Its Branched Products in Microorganisms: Advances and Prospects

The shikimate pathway is a necessary pathway for the synthesis of aromatic compounds. The intermediate products of the shikimate pathway and its branching pathway have promising properties in many fields, especially in the pharmaceutical industry. Many important compounds, such as shikimic acid, quinic acid, chlorogenic acid, gallic acid, pyrogallol, catechol and so on, can be synthesized by the shikimate pathway. Among them, shikimic acid is the key raw material for the synthesis of GS4104 (Tamiflu^®), an inhibitor of neuraminidase against avian influenza virus. Quininic acid is an important intermediate for synthesis of a variety of raw chemical materials and drugs. Gallic acid and catechol receive widespread attention as pharmaceutical intermediates. It is one of the hotspots to accumulate many kinds of target products by rationally modifying the shikimate pathway and its branches in recombinant strains by means of metabolic engineering. This review considers the effects of classical metabolic engineering methods, such as central carbon metabolism (CCM) pathway modification, key enzyme gene modification, blocking the downstream pathway on the shikimate pathway, as well as several expansion pathways and metabolic engineering strategies of the shikimate pathway, and expounds the synthetic biology in recent years in the application of the shikimate pathway and the future development direction.

Novel switchable ECF sigma factor transcription system for improving thaxtomin A production in Streptomyces

The application of the valuable natural product thaxtomin A, a potent bioherbicide from the potato scab pathogenic Streptomyces strains, has been greatly hindered by the low yields from its native producers. Here, we developed an orthogonal transcription system, leveraging extra-cytoplasmic function (ECF) sigma (σ) factor 17 (ECF17) and its cognate promoter P_ecf17, to express the thaxtomin gene cluster and improve the production of thaxtomin A. The minimal P_ecf17 promoter was determined, and a P_ecf17 promoter library with a wide range of strengths was constructed. Furthermore, a cumate inducible system was developed for precise temporal control of the ECF17 transcription system in S. venezuelae ISP5230. Theoretically, the switchable ECF17 transcription system could reduce the unwanted influences from host and alleviate the burdens introduced by overexpression of heterologous genes. The yield of thaxtomin A was significantly improved to 202.1 ± 15.3 μ g/mL using the switchable ECF17 transcription system for heterologous expression of the thaxtomin gene cluster in S. venezuelae ISP5230. Besides, the applicability of this transcription system was also tested in Streptomyces albus J1074, and the titer of thaxtomin A was raised to as high as 239.3 ± 30.6 μg/mL. Therefore, the inducible ECF17 transcription system could serve as a complement of the generally used transcription systems based on strong native constitutive promoters and housekeeping σ factors for the heterologous expression of valuable products in diverse Streptomyces hosts.

Engineering an oleic acid-induced system for Halomonas, E. coli and Pseudomonas

Ligand-induced system plays an important role for microbial engineering due to its tunable gene expression control over timings and levels. An oleic acid (OA)-induced system was recently constructed based on protein FadR, a transcriptional regulator involved in fatty acids metabolism, for metabolic control in Escherichia coli. In this study, we constructed a synthetic FadR-based OA-induced systems in Halomonas bluephagenesis by hybridizing the porin promoter core region and FadR-binding operator (fadO). The dynamic control range was optimized over 150-fold, and expression leakage was significantly reduced by tuning FadR expression and positioning fadO, forming a series of OA-induced systems with various expression strengths, respectively. Additionally, ligand orthogonality and cross-species portability were also studied and showed highly linear correlation among Halomonas spp., Escherichia coli and Pseudomonas spp. Finally, OA-induced systems with medium- and small-dynamic control ranges were employed to dynamically control the expression levels of morphology associated gene minCD, and monomer precursor 4-hydroxybutyrate-CoA (4HB-CoA) synthesis pathway for polyhydroxyalkanoates (PHA), respectively, in the presence of oleic acid as an inducer. As a result, over 10 g/L of poly-3-hydroxybutyrate (PHB) accumulated by elongated cell sizes, and 6 g/L of P(3HB-co-9.57 mol% 4HB) were obtained by controlling the dose and induction time of oleic acid only. This study provides a systematic approach for ligand-induced system engineering, and demonstrates an alternative genetic tool for dynamic control of industrial biotechnology.

Bifunctional optogenetic switch for improving shikimic acid production in E. coli

BACKGROUND

Biomass formation and product synthesis decoupling have been proven to be promising to increase the titer of desired value add products. Optogenetics provides a potential strategy to develop light-induced circuits that conditionally control metabolic flux redistribution for enhanced microbial production. However, the limited number of light-sensitive proteins available to date hinders the progress of light-controlled tools.

RESULTS

To address these issues, two optogenetic systems (TPRS and TPAS) were constructed by reprogramming the widely used repressor TetR and protease TEVp to expand the current optogenetic toolkit. By merging the two systems, a bifunctional optogenetic switch was constructed to enable orthogonally regulated gene transcription and protein accumulation. Application of this bifunctional switch to decouple biomass formation and shikimic acid biosynthesis allowed 35 g/L of shikimic acid production in a minimal medium from glucose, representing the highest titer reported to date by E. coli without the addition of any chemical inducers and expensive aromatic amino acids. This titer was further boosted to 76 g/L when using rich medium fermentation.

CONCLUSION

The cost effective and light-controlled switch reported here provides important insights into environmentally friendly tools for metabolic pathway regulation and should be applicable to the production of other value-add chemicals.

Engineering of Corynebacterium glutamicum for high-level γ-aminobutyric acid production from glycerol by dynamic metabolic control

Synthetic biology seeks to reprogram microbial cells for efficient production of value-added compounds from low-cost renewable substrates. A great challenge of chemicals biosynthesis is the competition between cell metabolism and target product synthesis for limited cellular resource. Dynamic regulation provides an effective strategy for fine-tuning metabolic flux to maximize chemicals production. In this work, we created a tunable growth phase-dependent autonomous bifunctional genetic switch (GABS) by coupling growth phase responsive promoters and degrons to dynamically redirect the carbon flux for metabolic state switching from cell growth mode to production mode, and achieved high-level GABA production from low-value glycerol in Corynebacterium glutamicum. A ribosome binding sites (RBS)-library-based pathway optimization strategy was firstly developed to reconstruct and optimize the glycerol utilization pathway in C. glutamicum, and the resulting strain CgGly2 displayed excellent glycerol utilization ability. Then, the initial GABA-producing strain was constructed by deleting the GABA degradation pathway and introducing an exogenous GABA synthetic pathway, which led to 5.26 g/L of GABA production from glycerol. In order to resolve the conflicts of carbon flux between cell growth and GABA production, we used the GABS to reconstruct the GABA synthetic metabolic network, in which the competitive modules of GABA biosynthesis, including the tricarboxylic acid (TCA) cycle module and the arginine biosynthesis module, were dynamically down-regulated while the synthetic modules were dynamically up-regulated after sufficient biomass accumulation. Finally, the resulting strain G7-1 accumulated 45.6 g/L of GABA with a yield of 0.4 g/g glycerol, which was the highest titer of GABA ever reported from low-value glycerol. Therefore, these results provide a promising technology to dynamically balance the metabolic flux for the efficient production of other high value-added chemicals from a low-value substrate in C. glutamicum.

Reconstructing a recycling and nonauxotroph biosynthetic pathway in Escherichia coli toward highly efficient production of L-citrulline

L-citrulline is a high-value amino acid with promising application in medicinal and food industries. Construction of highly efficient microbial cell factories for L-citrulline production is still an open issue due to complex metabolic flux distribution and L-arginine auxotrophy. In this study, we constructed a nonauxotrophic cell factory in Escherichia coli for high-titer L-citrulline production by coupling modular engineering strategies with dynamic pathway regulation. First, the biosynthetic pathway of L-citrulline was enhanced after blockage of the degradation pathway and introduction of heterologous biosynthetic genes from Corynebacterium glutamicum. Specifically, a superior recycling biosynthetic pathway was designed to replace the native linear pathway by deleting native acetylornithine deacetylase. Next, the carbamoyl phosphate and L-glutamate biosynthetic modules, the NADPH generation module, and the efflux module were modified to increase L-citrulline titer further. Finally, a toggle switch that responded to cell density was designed to dynamically control the expression of the argG gene and reconstruct a nonauxotrophic pathway. Without extra supplement of L-arginine during fermentation, the final CIT24 strain produced 82.1 g/L L-citrulline in a 5-L bioreactor with a yield of 0.34 g/g glucose and a productivity of 1.71 g/(L ⋅ h), which were the highest values reported by microbial fermentation. Our study not only demonstrated the successful design of cell factory for high-level L-citrulline production but also provided references of coupling the rational module engineering strategies and dynamic regulation strategies to produce high-value intermediate metabolites.

Engineering a CRISPRi Circuit for Autonomous Control of Metabolic Flux in Escherichia coli

Building autonomous switches is an effective approach for rewiring metabolic flux during microbial synthesis of chemicals. However, current autonomous switches largely rely on metabolite-responsive biosensors or quorum-sensing circuits. In this study, a stationary phase promoter (SPP) and a protein degradation tag (PDT) were combined with the CRISPR interference (CRISPRi) system to construct an autonomous repression system that could shut down multiple-gene expression depending on the cellular physiological state. With this autonomous CRISPRi system to regulate one target gene, a fermenter-scale titer of shikimic acid reached 21 g/L, which was the highest titer ever reported by Escherichia coli in a minimal medium without any chemical inducers. With three target genes repressed, 26 g/L glutaric acid could be achieved with decreased byproduct accumulation. These results highlight the applicability of the autonomous CRISPRi system for microbial production of value-added chemicals.

Development of a Hyperosmotic Stress Inducible Gene Expression System by Engineering the MtrA/MtrB-Dependent NCgl1418 Promoter in Corynebacterium glutamicum

Corynebacterium glutamicum is an important workhorse for industrial production of diversiform bioproducts. Precise regulation of gene expression is crucial for metabolic balance and enhancing production of target molecules. Auto-inducible promoters, which can be activated without expensive inducers, are ideal regulatory tools for industrial-scale application. However, few auto-inducible promoters have been identified and applied in C. glutamicum. Here, a hyperosmotic stress inducible gene expression system was developed and used for metabolic engineering of C. glutamicum. The promoter of NCgl1418 (P _NCgl1418 ) that was activated by the two-component signal transduction system MtrA/MtrB was found to exhibit a high inducibility under hyperosmotic stress conditions. A synthetic promoter library was then constructed by randomizing the flanking and space regions of P _NCgl1418 , and mutant promoters exhibiting high strength were isolated via fluorescence activated cell sorting (FACS)-based high-throughput screening. The hyperosmotic stress inducible gene expression system was applied to regulate the expression of lysE encoding a lysine exporter and repress four genes involved in lysine biosynthesis (gltA, pck, pgi, and hom) by CRISPR interference, which increased the lysine titer by 64.7% (from 17.0 to 28.0 g/L) in bioreactors. The hyperosmotic stress inducible gene expression system developed here is a simple and effective tool for gene auto-regulation in C. glutamicum and holds promise for metabolic engineering of C. glutamicum to produce valuable chemicals and fuels.

Dynamic Control of Metabolism

Metabolic engineering reprograms cells to synthesize value-added products. In doing so, endogenous genes are altered and heterologous genes can be introduced to achieve the necessary enzymatic reactions. Dynamic regulation of metabolic flux is a powerful control scheme to alleviate and overcome the competing cellular objectives that arise from the introduction of these production pathways. This review explores dynamic regulation strategies that have demonstrated significant production benefits by targeting the metabolic node corresponding to a specific challenge. We summarize the stimulus-responsive control circuits employed in these strategies that determine the criterion for actuating a dynamic response and then examine the points of control that couple the stimulus-responsive circuit to a shift in metabolic flux.

Integrated laboratory evolution and rational engineering of GalP/Glk-dependent Escherichia coli for higher yield and productivity of L-tryptophan biosynthesis

L-Tryptophan (Trp) is a high-value aromatic amino acid with diverse applications in food and pharmaceutical industries. Although production of Trp by engineered Escherichia coli has been extensively studied, the need of multiple precursors for its synthesis and the complex regulations of the biosynthetic pathways make the achievement of a high product yield still very challenging. Metabolic flux analysis suggests that the use of a phosphoenolpyruvate:sugar phosphotransferase system (PTS) independent glucose uptake system, i.e. the galactose permease/glucokinase (GalP/Glk) system, can theoretically double the Trp yield from glucose. To explore this possibility, a PTS- and GalP/Glk-dependent E. coli strain was constructed from a previously rationally developed Trp producer strain S028. However, the growth rate of the S028 mutant was severely impaired. To overcome this problem, promoter screening for modulated gene expression of GalP/Glk was carried out, following by a batch mode of adaptive laboratory evolution (ALE) which resulted in a strain K3 with a similar Trp yield and concentration as S028. In order to obtain a more efficient Trp producer, a novel continuous ALE system was developed by combining CRISPR/Cas9-facilitated in vivo mutagenesis with real-time measurement of cell growth and online monitoring of Trp-mediated fluorescence intensity. With the aid of this automatic system (auto-CGSS), a promising strain T5 was obtained and fed-batch fermentations showed an increase of Trp yield by 19.71% with this strain compared with that obtained by the strain K3 (0.164 vs. 0.137 ​g/g). At the same time, the specific production rate was increased by 52.93% (25.28 vs. 16.53 ​mg/g DCW/h). Two previously engineered enzyme variants AroGD6G-D7A and AnTrpCR378F were integrated into the strain T5, resulting in a highly productive strain T5AA with a Trp yield of 0.195 ​g/g and a specific production rate of 28.83 ​mg/g DCW/h.

Microbial physiological engineering increases the efficiency of microbial cell factories

Microbial cell factories provide vital platforms for the production of chemicals. Advanced biotechnological toolboxes have been developed to enhance their efficiency. However, these tools have limitations in improving physiological functions, and therefore boosting the efficiency (e.g. titer, rate, and yield) of microbial cell factories remains a challenge. In this review, we propose a strategy of microbial physiological engineering (MPE) to improve the efficiency of microbial cell factories. This strategy integrates tools from synthetic and systems biology to characterize and regulate physiological functions during chemical synthesis. MPE strategies mainly focus on the efficiency of substrate utilization, growth performance, stress tolerance, and the product export capacity of cell factories. In short, this review provides a new framework for resolving the bottlenecks that currently exist in low-efficiency cell factories.