Variability in the mechanical properties of spider silks on three levels: interspecific, intraspecific and intraindividual

Influence of Spider Silk Protein Structure on Mechanical and Biological Properties for Energetic Material Detection

Spider silk protein, renowned for its excellent mechanical properties, biodegradability, chemical stability, and low immune and inflammatory response activation, consists of a core domain with a repeat sequence and non-repeating sequences at the N-terminal and C-terminal. In this review, we focus on the relationship between the silk structure and its mechanical properties, exploring the potential applications of spider silk materials in the detection of energetic materials.

Impact of environmental factors on spider silk properties

Spider orb webs have evolved to stop flying prey, fast and slow alike. One of the main web elements dissipating impact energy is the radial fibers, or major ampullate silks, which possess a toughness surpassing most man-made materials. Orb webs are extended phenotypes, and as such their architectural elements, including major ampullate silks, have been selected to optimize prey capture under the respective environmental conditions. In this study, we investigated the correlation of three landscape scales and three microhabitat characteristics with intrinsic silk properties (elastic modulus, yield stress, tensile strength, extensibility, and toughness) to understand underlying ecological patterns. For this purpose, we collected and mechanically tested major ampullate silks from 50 spider species inhabiting large altitudinal and climatic gradients in Colombia. Using regression analysis and model selection, we investigated the environmental drivers of inter- and intra-specific patterns of major ampullate silk properties, taking into account phylogenetic relatedness based on newly sequenced mitochondrial genomes. We found that the total amount of energy absorbed, i.e., toughness and tensile strength, is higher for fibers from species inhabiting regions where heavy rainfall is common. Interestingly, we observe the same general trend between individuals of the same species, stressing the importance of this environmental driver. We also observe a phylogenetic conservation in the relation of environmental variables with silk tensile strength and yield stress. In conclusion, the increase in major ampullate silk tensile strength and toughness may reflect an adaptation to prevent frequent rain damage to orb webs and the associated energetic loss.

Attachment discs of the diving bell spider Argyroneta aquatica

To adhere their silk threads for the construction of webs and to fix the dragline, spiders produce attachment discs of piriform silk. Uniquely, the aquatic spider Argyroneta aquatica spends its entire life cycle underwater. Therefore, it has to glue its attachment discs to substrates underwater. Here we show that Argyroneta aquatica applies its thread anchors within an air layer around the spinnerets maintained by superhydrophobic setae. During spinning, symmetric movements of the spinnerets ensure retaining air in the contact area. The flat structure of the attachment discs is thought to facilitate fast curing of the piriform adhesive cement and improves the resistance against drag forces. Pull-off tests on draglines connected with attachment discs on different hydrophilic substrates point to dragline rupture as the failure mode. The Young´s modulus of the dragline (8.3 GPa) is within the range as in terrestrial spiders. The shown structural and behavioral adaptations can be the model for new artificial underwater gluing devices.

Development of mechanically-consistent coarse-grained molecular dynamics model: case study of mechanics of spider silk

Understanding mechanics of spider silk holds immense importance due to its potential to drive innovation in the development of materials with exceptional mechanical characteristics suited for a wide range of applications. Coarse-grained (CG) molecular simulations plays a particularly valuable role in this endeavor, allowing for the efficient investigation of spider silk's mechanical properties. Our research is centered on the examination of spider silk, which comprises major ampullate silk protein (MaSp1). To achieve this, we developed a CG molecular dynamics model. Our investigation began with a focus on MaSp1 chains subjected to uniaxial tensile load, with comparisons made between the CG model results and all-atom simulations. Subsequently, we extended our simulations to encompass more extensive systems, including fully-ordered MaSp1 bundles undergoing uniaxial static stretching. Through comparison with existing literature, we assess how well the CG model reproduces the mechanical properties of spider silk in highly ordered structures. Furthermore, we explored a scenario where MaSp1 bundles were randomly positioned and stretched, providing valuable insights into silk behavior when the initial structure lacks order. Another simulation involved random positioning, but with some degree of orientation in the loading direction, allowing for a closer examination of the initial structure's influence.

Memory effect of spider major ampullate silk in loading-unloading cycles and the structural connotations

Spider silk is repeatedly stretched while performing biological functions. There is a close relationship between the shape change of the fibre materials and their mechanical properties. However, the effect of the deformation and interval time on the structure and tensile behaviour properties of spider silk after repeatedly stretching by given strain value has been rarely reported. Here we found that major ampullate silk (MAS) can revert its tensile behaviour independent of its previous loading history via intervals of approximately 8 s to 5 min with constant and increased elongation, respectively, after being subjected to yield and hardening regions. The true stress-true strain curve beyond a given value of true strain is independent from the previous loading history of the sample. Even after longer intervals (≥1 h), MAS can reproduce the last tensile behaviour via one stretched. Despite recognizing the development of irreversible deformations in the material when tested in air, the reversible change in tensile behaviour outside the spider silk's elastic region has rarely been observed before. MAS has at least one proper ground state that allows it to present good shape and mechanical behaviour memory in terms of longitudinal stretching, functioning as a new strategy to achieve certain tensile properties. The analysis of the true stress-true strain curves was performed from a series of loading‒unloading tests to evaluate the evolution of those mechanical parameters with the cycle number. The elastic modulus measured in the loading steps increases monotonously with increasing values of true strain reached in the cycles. In contrast, a marginal variation is found in the values of the yield stress measured in the different cycles. The memory and variation in the mechanical behaviour and performance of MAS can be accounted for through the irreversible and reversible deformation micromechanisms and its combination in which the viscoelasticity of the material plays a leading role. These findings may be helpful to guide the biomimetic design of novel fibre materials such as spider silk gut via artificially stretching spider silk glands.

Influence of experimental methods on the mechanical properties of silk fibers: A systematic literature review and future road map

Spider silk fibers are of scientific and industrial interest because of their extraordinary mechanical properties. These properties are normally determined by tensile tests, but the values obtained are dependent on the morphology of the fibers, the test conditions, and the methods by which stress and strain are calculated. Because of this, results from many studies are not directly comparable, which has led to widespread misconceptions in the field. Here, we critically review most of the reports from the past 50 years on spider silk mechanical performance and use artificial spider silk and native silks as models to highlight the effect that different experimental setups have on the fibers' mechanical properties. The results clearly illustrate the importance of carefully evaluating the tensile test methods when comparing the results from different studies. Finally, we suggest a protocol for how to perform tensile tests on silk and biobased fibers.

Insights into the material properties of dragline spider silk affecting Schwann cell migration

Dragline silk of Trichonephila spiders has attracted attention in various applications. One of the most fascinating uses of dragline silk is in nerve regeneration as a luminal filling for nerve guidance conduits. In fact, conduits filled with spider silk can measure up to autologous nerve transplantation, but the reasons behind the success of silk fibers are not yet understood. In this study dragline fibers of Trichonephila edulis were sterilized with ethanol, UV radiation, and autoclaving and the resulting material properties were characterized with regard to the silk's suitability for nerve regeneration. Rat Schwann cells (rSCs) were seeded on these silks in vitro and their migration and proliferation were investigated as an indication for the fiber's ability to support the growth of nerves. It was found that rSCs migrate faster on ethanol treated fibers. To elucidate the reasons behind this behavior, the fiber's morphology, surface chemistry, secondary protein structure, crystallinity, and mechanical properties were studied. The results demonstrate that the synergy of dragline silk's stiffness and its composition has a crucial effect on the migration of rSCs. These findings pave the way towards understanding the response of SCs to silk fibers as well as the targeted production of synthetic alternatives for regenerative medicine applications.

Variation in the Elastic Modulus and Increased Energy Dissipation Induced by Cyclic Straining of Argiope bruennichi Major Ampullate Gland Silk

The trends exhibited by the parameters that describe the mechanical behaviour of major ampullate gland silk fibers spun by Argiope bruennichi spiders is explored by performing a series of loading-unloading tests at increasing values of strain, and by the subsequent analysis of the true stress-true strain curves obtained from these cycles. The elastic modulus, yields stress, energy absorbed, and energy dissipated in each cycle are computed in order to evaluate the evolution of these mechanical parameters with this cyclic straining. The elastic modulus is observed to increase steadily under these loading conditions, while only a moderate variation is found in the yield stress. It is also observed that a significant proportion of the energy initially absorbed in each cycle is not only dissipated, but that the material may recover partially from the associated irreversible deformation. This variation in the mechanical performance of spider silk is accounted for through a combination of irreversible and reversible deformation micromechanisms in which the viscoelasticity of the material plays a leading role.

The Spider Silk Standardization Initiative (S3I): A powerful tool to harness biological variability and to systematize the characterization of major ampullate silk fibers spun by spiders from suburban Sydney, Australia

The true stress-true strain curves of 11 Australian spider species from the Entelegynae lineage were tensile tested and classified based on the values of the alignment parameter, α*, in the framework of the Spider Silk Standardization Initiative (S3I). The application of the S3I methodology allowed the determination of the alignment parameter in all cases, and were found to range between α* = 0.03 and α* = 0.65. These data, in combination with previous results on other species included in the Initiative, were exploited to illustrate the potential of this approach by testing two simple hypotheses on the distribution of the alignment parameter throughout the lineage: (1) whether a uniform distribution may be compatible with the values obtained from the studied species, and (2) whether any trend may be established between the distribution of the α* parameter and phylogeny. In this regard, the lowest values of the α* parameter are found in some representatives of the Araneidae group, and larger values seem to be found as the evolutionary distance from this group increases. However, a significant number of outliers to this apparent general trend in terms of the values of the α* parameter are described.

Biological Materials Processing: Time-Tested Tricks for Sustainable Fiber Fabrication

There is an urgent need to improve the sustainability of the materials we produce and use. Here, we explore what humans can learn from nature about how to sustainably fabricate polymeric fibers with excellent material properties by reviewing the physical and chemical aspects of materials processing distilled from diverse model systems, including spider silk, mussel byssus, velvet worm slime, hagfish slime, and mistletoe viscin. We identify common and divergent strategies, highlighting the potential for bioinspired design and technology transfer. Despite the diversity of the biopolymeric fibers surveyed, we identify several common strategies across multiple systems, including: (1) use of stimuli-responsive biomolecular building blocks, (2) use of concentrated fluid precursor phases (e.g., coacervates and liquid crystals) stored under controlled chemical conditions, and (3) use of chemical (pH, salt concentration, redox chemistry) and physical (mechanical shear, extensional flow) stimuli to trigger the transition from fluid precursor to solid material. Importantly, because these materials largely form and function outside of the body of the organisms, these principles can more easily be transferred for bioinspired design in synthetic systems. We end the review by discussing ongoing efforts and challenges to mimic biological model systems, with a particular focus on artificial spider silks and mussel-inspired materials.

Relating spidroin motif prevalence and periodicity to the mechanical properties of major ampullate spider silks

Spider dragline fibers exhibit incredible mechanical properties, outperforming many synthetic polymers in toughness assays, and possess desirable properties for medical and other human applications. These qualities make dragline fibers popular subjects for biomimetics research. The enormous diversity of spiders presents both an opportunity for the development of new bioinspired materials and a challenge for the identification of fundamental design principles, as the mechanical properties of dragline fibers show both intraspecific and interspecific variations. In this regard, the stress-strain curves of draglines from different species have been shown to be effectively compared by the α* parameter, a value derived from maximum-supercontracted silk fibers. To identify potential molecular mechanisms impacting α* values, here we analyze spider fibroin (spidroin) sequences of the Western black widow (Latrodectus hesperus) and the black and yellow garden spider (Argiope aurantia). This study serves as a primer for investigating the molecular properties of spidroins that underlie species-specific α* values. Initial findings are that while overall motif composition was similar between species, certain motifs and higher level periodicities of glycine-rich region lengths showed variation, notably greater distances between poly-A motifs in A. aurantia sequences. In addition to increased period lengths, A. aurantia spidroins tended to have an increased prevalence of charged and hydrophobic residues. These increases may impact the number and strength of hydrogen bond networks within fibers, which have been implicated in conformational changes and formation of nanocrystals, contributing to the greater extensibility of A. aurantia draglines compared to those of L. hesperus.

Massive production of fibroin nano-fibrous biomaterial by turbulent co-flow

Among the different polymers (proteins, polysaccharides, etc.) that make up natural fibers, fibroin is a protein produced by silk spinning animals, which have developed an optimized system for the conversion of a highly concentrated solution of this protein into high-performance solid fibers. This protein undergoes a self-assembly process in the silk glands that result from chemical gradients and by the application of mechanical stresses during the last step of the process. In the quest for a process that could mimic natural spinning at massive scales, we have discovered that turbulence offers a novel and promising solution: a turbulent liquid jet can be formed by a chemically green and simple coagulating liquid (a diluted solution of acetic acid in etanol) co-flowing with a concentrated solution of fibroin in water by the use of a Flow Blurring nebulizer. In this system, (a) the co-flowing coagulant liquid extracts water from the original protein solution and, simultaneously, (b) the self-assembled proteins are subjected to mechanical actions, including splitting and stretching. Given the non-negligible produced content with the size and appearance of natural silk, the stochastic distribution of those effects in our process should contain the range of natural ones found in animals. The resulting easily functionalizable and tunable one-step material is 100% biocompatible, and our method a perfect candidate to large-scale, low-cost, green and sustainable processing of fibroin for fibres and textiles.

Rapid molecular diversification and homogenization of clustered major ampullate silk genes in Argiope garden spiders

The evolutionary diversification of orb-web weaving spiders is closely tied to the mechanical performance of dragline silk. This proteinaceous fiber provides the primary structural framework of orb web architecture, and its extraordinary toughness allows these structures to absorb the high energy of aerial prey impact. The dominant model of dragline silk molecular structure involves the combined function of two highly repetitive, spider-specific, silk genes (spidroins)-MaSp1 and MaSp2. Recent genomic studies, however, have suggested this framework is overly simplistic, and our understanding of how MaSp genes evolve is limited. Here we present a comprehensive analysis of MaSp structural and evolutionary diversity across species of Argiope (garden spiders). This genomic analysis reveals the largest catalog of MaSp genes found in any spider, driven largely by an expansion of MaSp2 genes. The rapid diversification of Argiope MaSp genes, located primarily in a single genomic cluster, is associated with profound changes in silk gene structure. MaSp2 genes, in particular, have evolved complex hierarchically organized repeat units (ensemble repeats) delineated by novel introns that exhibit remarkable evolutionary dynamics. These repetitive introns have arisen independently within the genus, are highly homogenized within a gene, but diverge rapidly between genes. In some cases, these iterated introns are organized in an alternating structure in which every other intron is nearly identical in sequence. We hypothesize that this intron structure has evolved to facilitate homogenization of the coding sequence. We also find evidence of intergenic gene conversion and identify a more diverse array of stereotypical amino acid repeats than previously recognized. Overall, the extreme diversification found among MaSp genes requires changes in the structure-function model of dragline silk performance that focuses on the differential use and interaction among various MaSp paralogs as well as the impact of ensemble repeat structure and different amino acid motifs on mechanical behavior.

Differences in the Elastomeric Behavior of Polyglycine-Rich Regions of Spidroin 1 and 2 Proteins

Two different polyglycine-rich fragments were selected as representatives of major ampullate gland spidroins (MaSp) 1 and 2 types, and their behavior in a water-saturated environment was simulated within the framework of molecular dynamics (MD). The selected fragments are found in the sequences of the proteins MaSp1a and MaSp2.2a of Argiope aurantia with respective lengths of 36 amino acids (MaSp1a) and 50 amino acids (MaSp2.2s). The simulation took the fully extended β-pleated conformation as reference, and MD was used to determine the equilibrium configuration in the absence of external forces. Subsequently, MD were employed to calculate the variation in the distance between the ends of the fragments when subjected to an increasing force. Both fragments show an elastomeric behavior that can be modeled as a freely jointed chain with links of comparable length, and a larger number of links in the spidroin 2 fragment. It is found, however, that the maximum recovery force recorded from the spidroin 2 peptide (F_max ≈ 400 pN) is found to be significantly larger than that of the spidroin 1 (F_max ≈ 250 pN). The increase in the recovery force of the spidroin 2 polyglycine-rich fragment may be correlated with the larger values observed in the strain at breaking of major ampullate silk fibers spun by Araneoidea species, which contain spidroin 2 proteins, compared to the material produced by spider species that lack these spidroins (RTA-clade).

1000 spider silkomes: Linking sequences to silk physical properties

Spider silks are among the toughest known materials and thus provide models for renewable, biodegradable, and sustainable biopolymers. However, the entirety of their diversity still remains elusive, and silks that exceed the performance limits of industrial fibers are constantly being found. We obtained transcriptome assemblies from 1098 species of spiders to comprehensively catalog silk gene sequences and measured the mechanical, thermal, structural, and hydration properties of the dragline silks of 446 species. The combination of these silk protein genotype-phenotype data revealed essential contributions of multicomponent structures with major ampullate spidroin 1 to 3 paralogs in high-performance dragline silks and numerous amino acid motifs contributing to each of the measured properties. We hope that our global sampling, comprehensive testing, integrated analysis, and open data will provide a solid starting point for future biomaterial designs.

The properties of native Trichonephila dragline silk and its biomedical applications

Spider silk has fascinated mankind for millennia, but it is only in recent decades that scientific research has begun to unravel all its characteristics and applications. The uniqueness of spider silk resides in its versatility, in which a combination of high strength and extensibility results in extraordinary toughness, superior to almost all natural and man-made fibers. Dragline silk consists of proteins with highly repetitive amino acid sequences, which have been correlated with specific secondary structures responsible for its physical properties. The native fiber also shows high cytocompatibility coupled with low immunogenicity, making it a promising natural biomaterial for numerous biomedical applications. Recently, novel technologies have enabled new insights into the material and biomedical properties of silk. Due to the increasing interest in spider silk, as well as the desire to produce synthetic alternatives, we present an update on the current knowledge of silk fibers produced by the spider genus Trichonephila.

Expression of spidroin proteins in the silk glands of golden orb-weaver spiders

The expression of spidroins in the major ampullate, minor ampullate, flagelliform, and tubuliform silk glands of Trichonephila clavipes spiders was analyzed using proteomics analysis techniques. Spidroin peptides were identified and assigned to different gene products based on sequence concurrence when compared with the whole genome of the spider. It was found that only a relatively low proportion of the spidroin genes are expressed as proteins in any of the studied glands. In addition, the expression of spidroin genes in different glands presents a wide range of patterns, with some spidroins being found in a single gland exclusively, while others appear in the content of several glands. The combination of precise genomics, proteomics, microstructural, and mechanical data provides new insights both on the design principles of these materials and how these principles might be translated for the production of high-performance bioinspired artificial fibers.

Mechanical Properties of Dragline Silk Fiber Using a Bottom-Up Approach

We propose a molecular-based three-dimensional (3D) continuum model of dragline silk of Araneus diadematus, which takes into account the plasticity of the β-sheet crystals, the rate-dependent behavior of the amorphous matrix, and the viscous interface friction between them. For the proposed model, we computed the tensile properties, the effects of velocity on the mechanical properties, and hysteresis values, which are in good agreement with available experimental data. The silk fiber model’s yield point, breaking strength, post-yield stiffness, and toughness increased with increasing pulling velocity, while extensibility and the diameter of the silk fiber decreased. Our bottom-up approach has shed light on silk fiber mechanics, which can be used as an essential tool to design artificial composite materials.

Artificial and natural silk materials have high mechanical property variability regardless of sample size

Silk fibres attract great interest in materials science for their biological and mechanical properties. Hitherto, the mechanical properties of the silk fibres have been explored mainly by tensile tests, which provide information on their strength, Young’s modulus, strain at break and toughness modulus. Several hypotheses have been based on these data, but the intrinsic and often overlooked variability of natural and artificial silk fibres makes it challenging to identify trends and correlations. In this work, we determined the mechanical properties of Bombyx mori cocoon and degummed silk, native spider silk, and artificial spider silk, and compared them with classical commercial carbon fibres using large sample sizes (from 10 to 100 fibres, in total 200 specimens per fibre type). The results confirm a substantial variability of the mechanical properties of silk fibres compared to commercial carbon fibres, as the relative standard deviation for strength and strain at break is 10–50%. Moreover, the variability does not decrease significantly when the number of tested fibres is increased, which was surprising considering the low variability frequently reported for silk fibres in the literature. Based on this, we prove that tensile testing of 10 fibres per type is representative of a silk fibre population. Finally, we show that the ideal shape of the stress–strain curve for spider silk, characterized by a pronounced exponential stiffening regime, occurs in only 25% of all tested spider silk fibres.

The balance of crystalline and amorphous regions in the fibroin structure underpins the tensile strength of bagworm silk

Protein-based materials are considered versatile biomaterials, and their biodegradability is an advantage for sustainable development. Bagworm produces strong silk for use in unique situations throughout its life stages. Rigorous molecular analyses of Eumeta variegata suggested that the particular mechanical properties of its silk are due to the coexistence of poly-A and GA motifs. However, little molecular information on closely related species is available, and it is not understood how these properties were acquired evolutionarily or whether the motif combination is a conserved trait in other bagworms. Here, we performed a transcriptome analysis of two other bagworm species (Canephora pungelerii and Bambalina sp.) belonging to the family Psychidae to elucidate the relationship between the fibroin gene and silk properties. The obtained transcriptome assemblies and tensile tests indicated that the motif combination and silk properties were conserved among the bagworms. Furthermore, our analysis showed that C. pungelerii produces extraordinarily strong silk (breaking strength of 1.4 GPa) and indicated that the cause may be the C. pungelerii -specific balance of crystalline/amorphous regions in the H-fibroin repetitive domain. This particular H-fibroin architecture may have been evolutionarily acquired to produce strong thread to maintain bag stability during the relatively long development period of Canephora species relative to other bagworms.

Correlation between protein secondary structure and mechanical performance for the ultra-tough dragline silk of Darwin's bark spider

The spider major ampullate (MA) silk exhibits high tensile strength and extensibility and is typically a blend of MaSp1 and MaSp2 proteins with the latter comprising glycine-proline-glycine-glycine-X repeating motifs that promote extensibility and supercontraction. The MA silk from Darwin's bark spider (Caerostris darwini) is estimated to be two to three times tougher than the MA silk from other spider species. Previous research suggests that a unique MaSp4 protein incorporates proline into a novel glycine-proline-glycine-proline motif and may explain C. darwini MA silk's extraordinary toughness. However, no direct correlation has been made between the silk's molecular structure and its mechanical properties for C. darwini. Here, we correlate the relative protein secondary structure composition of MA silk from C. darwini and four other spider species with mechanical properties before and after supercontraction to understand the effect of the additional MaSp4 protein. Our results demonstrate that C. darwini MA silk possesses a unique protein composition with a lower ratio of helices (31%) and β-sheets (20%) than other species. Before supercontraction, toughness, modulus and tensile strength correlate with percentages of β-sheets, unordered or random coiled regions and β-turns. However, after supercontraction, only modulus and strain at break correlate with percentages of β-sheets and β-turns. Our study highlights that additional information including crystal size and crystal and chain orientation is necessary to build a complete structure-property correlation model.

Size-related increase in inducible mechanical variability of major ampullate silk in a huntsman spider (Araneae: Sparassidae)

Most spiders use major ampullate silk (MAS) to perform many functions across their lifetimes, including prey capture, vibratory signal detection, and safety/dragline. To accommodate their various needs, adult spiders can use inducible variability to tailor MAS with specific mechanical properties. However, it is currently unknown whether this inducible mechanical variability develops gradually or remains consistent across spider size. Supercontraction -a process by which "native-state" silk fibers axially shrink when exposed to water or high humidity-can be used to reveal the extent of inducible variability in MAS. Supercontraction removes some processing effects that occur during the spinning of the solid fiber from its liquid precursor by allowing a native-state MAS fiber to return to a low energy "ground-state". Here, we examined the relative extent of inducible variability of MAS across spider size by assessing supercontraction properties and the difference between ground- and native-state MAS tensile properties using silk from the huntsman spider Heteropoda venatoria (Sparassidae). Stiffness of forcibly pulled native-state silk increased by 200% with spider size. After exposure to 90% RH and subsequent supercontraction, axial shrinkage of native-state silk fibers increased by 15% in larger spiders. Supercontracted, ground-state fibers demonstrated a 200% increase in extensibility across spider size. Our results indicate a gradual increase in inducible variability of MAS mechanical properties across spider size potentially caused by shifts in internal processing or chemical composition. These findings imply both development of inducible variability and changes in use of MAS as a safety line or aiding jumps across a spider's lifetime.

Basic Principles in the Design of Spider Silk Fibers

The prominence of spider silk as a hallmark in biomimetics relies not only on its unrivalled mechanical properties, but also on how these properties are the result of a set of original design principles. In this sense, the study of spider silk summarizes most of the main topics relevant to the field and, consequently, offers a nice example on how these topics could be considered in other biomimetic systems. This review is intended to present a selection of some of the essential design principles that underlie the singular microstructure of major ampullate gland silk, as well as to show how the interplay between them leads to the outstanding tensile behavior of spider silk. Following this rationale, the mechanical behavior of the material is analyzed in detail and connected with its main microstructural features, specifically with those derived from the semicrystalline organization of the fibers. Establishing the relationship between mechanical properties and microstructure in spider silk not only offers a vivid image of the paths explored by nature in the search for high performance materials, but is also a valuable guide for the development of new artificial fibers inspired in their natural counterparts.

Interplay of Different Major Ampullate Spidroins during Assembly and Implications for Fiber Mechanics

Major ampullate (MA) spider silk has fascinating mechanical properties combining strength and elasticity. All known natural MA silks contain at least two or more different spidroins; however, it is unknown why and if there is any interplay in the spinning dope. Here, two different spidroins from Araneus diadematus are co-produced in Escherichia coli to study the possible dimerization and effects thereof on the mechanical properties of fibers. During the production of the two spidroins, a mixture of homo- and heterodimers is formed triggered by the carboxyl-terminal domains. Interestingly, homodimeric species of the individual spidroins self-assemble differently in comparison to heterodimers, and stoichiometric mixtures of homo- and heterodimers yield spidroin networks upon assembly with huge impact on fiber mechanics upon spinning. The obtained results provide the basis for man-made tuning of spinning dopes to yield high-performance fibers.

Doing What Spiders Cannot-A Road Map to Supreme Artificial Silk Fibers

Fabricating artificial spider silk fibers in bulk scale has been a major goal in materials science for centuries. Two main routes have emerged for making such fibers. One method uses biomimetics in which the spider silk proteins (spidroins) are produced under nativelike conditions and then spun into fibers in a process that captures the natural, complex molecular mechanisms. However, these fibers do not yet match the mechanical properties of native silk fibers, potentially due to the small size of the designed spidroin used. The second route builds on biotechnological progress that enables production of large spidroins that can be spun into fibers by using organic solvents. With this approach, fibers that equal the native material in terms of mechanical properties can be manufactured, but the yields are too low for economically sustainable production. Hence, the need for new ideas is urgent. Herein, we introduce a structural-biology-based approach for engineering artificial spidroins that circumvents the laws with which spidroins, being secretory proteins, have to comply in order to avoid membrane insertion and provide a road map to the production of biomimetic silk fibers with improved mechanical properties.

Unique behavioural modifications in the web structure of the cave orb spider Meta menardi (Araneae, Tetragnathidae)

In the last decade there has been a renewed interest in the study of behavioural adaptations to environmental constraints with a focus on adaptations to challenging habitats due to their reduced ecological complexity. However, behavioural studies on organisms adapted to nutrient poor subterranean habitats are few and far between. Here, we compared both morphological traits, in terms of relative leg lengths, and behavioural traits, captured in the geometry of the spider web, between the cave-dwelling spider, Meta menardi, and two aboveground species from the same family (Tetragnathidae); Metellina mengei and Tetragnatha montana. We found that the webs of the cave spider differed significantly from the two surface-dwelling species. The most dramatic difference was the lack of frame threads with the radii in the webs instead attaching directly to the surrounding rock, but other differences in relative web size, web asymmetry and number of capture spiral threads were also found. We argue that these modifications are likely to be adaptations to allow for a novel foraging behaviour to additionally capture walking prey within the vicinity of the web. We found only limited evidence for morphological adaptations and suggest that the cave orb spider could act as a model organism for studies of behaviour in energy-poor environments.

Forcibly spun dragline silk fibers from web-building spider Trichonephila clavata ensure robustness irrespective of spinning speed and humidity

Web-building spiders secrete dragline silk fibers to sustain their body and use them as frameworks during web construction. They spin dragline silk fibers at various spinning speed and humidity conditions depending on their natural habitat. Here, we investigated the effect of spinning speed and humidity on the structural and mechanical properties of dragline silk fibers from web-building spider Trichonephila clavata obtained by the forcibly spinning method. We found that the crystal and morphological structures did not rely on the spinning speed and humidity. Furthermore, the mechanical strength and extensibility of the dragline silk fibers were maintained, demonstrating that dragline silk fibers ensure robustness irrespective of the spinning speed and humidity. The results obtained in the present study are helpful not only to understand the biological basis of the silk fiber formation of spiders but also contribute to consider the spinning conditions for the process of creating synthetic silk fibers.

Free-standing spider silk webs of the thomisid Saccodomus formivorus are made of composites comprising micro- and submicron fibers

Our understanding of the extraordinary mechanical and physico-chemical properties of spider silk is largely confined to the fibers produced by orb-weaving spiders, despite the diversity of foraging webs that occur across numerous spider families. Crab spiders (Thomisidae) are described as ambush predators that do not build webs, but nevertheless use silk for draglines, egg cases and assembling leaf-nests. A little-known exception is the Australian thomisid Saccodomus formivorus, which constructs a basket-like silk web of extraordinary dimensional stability and structural integrity that facilitates the capture of its ant prey. We examined the physical and chemical properties of this unusual web and revealed that the web threads comprise microfibers that are embedded within a biopolymeric matrix containing additionally longitudinally-oriented submicron fibers. We showed that the micro- and submicron fibers differ in their chemical composition and that the web threads show a remarkable lateral resilience compared with that of the major ampullate silk of a well-investigated orb weaver. Our novel analyses of these unusual web and silk characteristics highlight how investigations of non-model species can broaden our understanding of silks and the evolution of foraging webs.

Application of the Spider Silk Standardization Initiative (S3I) methodology to the characterization of major ampullate gland silk fibers spun by spiders from Pantanos de Villa wetlands (Lima, Peru)

Spider silk is a natural material with unique properties and a great potential for engineering and biomedical applications. In spite of its simple composition and highly conserved and stereotypical production, spider silks show a wide range of variability in their mechanical properties which, for long, have defied their classification and standardization. Here we propose to launch the Spider Silk Standardization Initiative (S³I), a methodology based on the definition of the α* parameter, in an attempt to define a systematic procedure to classify the tensile properties exhibited by major ampullate gland silk (MAS) spun by Entelegynae spiders. The α* parameter is calculated from the comparison of the true stress-true strain curve of any MAS fiber after being subjected to maximum supercontraction, with the true stress-true strain curve of the species Argiope aurantia, which is set as a reference curve. This work presents the details of the S³I methodology and, as an example, shows its application to an assemblage of Entelegynae spiders from different families collected at the Pantanos de Villa wetlands (Lima, Peru). The systematic and objective classification of the tensile properties of MAS fibers allowed by the S³I will offer insights into key aspects of the biological evolution of the material, and address questions such as how history and adaptation contributed to shape those properties. In addition, it will surely have far reaching consequences in fields such as Materials Science, and Molecular and Evolutionary Biology, by organizing the range of tensile properties exhibited by spider silk fibers.

Mechanical Properties and Weibull Scaling Laws of Unknown Spider Silks

Spider silks present extraordinary mechanical properties, which have attracted the attention of material scientists in recent decades. In particular, the strength and the toughness of these protein-based materials outperform the ones of many man-made fibers. Unfortunately, despite the huge interest, there is an absence of statistical investigation on the mechanical properties of spider silks and their related size effects due to the length of the fibers. Moreover, several spider silks have never been mechanically tested. Accordingly, in this work, we measured the mechanical properties and computed the Weibull parameters for different spider silks, some of them unknown in the literature. We also measured the mechanical properties at different strain rates for the dragline of the species Cupiennius salei. For the same species, we measured the strength and Weibull parameters at different fiber lengths. In this way, we obtained the spider silk scaling laws directly and according to Weibull's prediction. Both length and strain rates affect the mechanical properties of spider silk, as rationalized by Weibull's statistics.

High strength in combination with high toughness in robust and sustainable polymeric materials

In materials science, there is an intrinsic conflict between high strength and high toughness, which can be resolved for different materials only through the use of innovative design principles. Advanced materials must be highly resistant to both deformation and fracture. We overcome this conflict in man-made polymer fibers and show multifibrillar polyacrylonitrile yarn with a toughness of 137 ± 21 joules per gram in combination with a tensile strength of 1236 ± 40 megapascals. The nearly perfect uniaxial orientation of the fibrils, annealing under tension in the presence of linking molecules, is essential for the yarn's notable mechanical properties. This underlying principle can be used to create similar strong and tough fibers from other commodity polymers in the future and can be used in a variety of applications in areas such as biomedicine, satellite technology, textiles, aircrafts, and automobiles.

Determination of the Complete Elasticity of Nephila pilipes Spider Silk

Spider silks are remarkable materials designed by nature to have extraordinary elasticity. Their elasticity, however, remains poorly understood, as typical stress–strain experiments only allow access to the axial Young’s modulus. In this work, micro-Brillouin light spectroscopy (micro-BLS), a noncontact, nondestructive technique, is utilized to probe the direction-dependent phonon propagation in the Nephila pilipes spider silk and hence solve its full elasticity. To the best of our knowledge, this is the first demonstration on the determination of the anisotropic Young’s moduli, shear moduli, and Poisson’s ratios of a single spider fiber. The axial and lateral Young’s moduli are found to be 20.9 ± 0.8 and 9.2 ± 0.3 GPa, respectively, and the anisotropy of the Young’s moduli further increases upon stretching. In contrast, the shear moduli and Poisson’s ratios exhibit very weak anisotropy and are robust to stretching.

Strain softening and stiffening responses of spider silk fibers probed using a Micro-Extension Rheometer

Spider silk possesses unique mechanical properties like large extensibility, high tensile strength, super-contractility, etc. Understanding these mechanical responses requires characterization of the rheological properties of silk beyond the simple force-extension relations which are widely reported. Here we study the linear and non-linear viscoelastic properties of dragline silk obtained from social spider Stegodyphus sarasinorum using a Micro-Extension Rheometer that we have developed. Unlike continuous extension data, our technique allows for the probing of the viscoelastic response by applying small perturbations about sequentially increasing steady-state strain values. In addition, we extend our analysis to obtain the characteristic stress relaxation times and the frequency responses of the viscous and elastic moduli. Using these methods, we show that in a small strain regime (0-4%) dragline silk of social spiders shows a strain softening response followed by a strain stiffening response at higher strains (>4%). The stress relaxation time, on the other hand, increases monotonically with increasing strain for the entire range. We also show that the silk stiffens while ageing within the typical lifetime of a web. Our results demand the inclusion of the kinetics of domain unfolding and refolding in the existing models to account for the relaxation time behavior.

Imaging and mechanical characterization of different junctions in spider orb webs

Spider silk and spider orb webs are among the most studied biological materials and structures owing to their outstanding mechanical properties. A key feature that contributes significantly to the robustness and capability to absorb high kinetic energy of spider webs is the presence of junctions connecting different silk threads. Surprisingly, in spite of their fundamental function, the mechanics of spider web junctions have never been reported. Herein, through mechanical characterization and imaging, we show for the first time that spider orb webs host two different types of junction, produced by different silk glands, which have different morphology, and load bearing capability. These differences can be explained in view of the different roles they play in the web, i.e. allowing for a localized damage control or anchoring the whole structure to the surrounding environment.

Evaluation of selected biological properties of the hunting web spider (Steatoda grossa, Theridiidae) in the aspect of short- and long-term exposure to cadmium

The study aimed at comparing the effects of short- and long-term exposure of Steatoda grossa female spiders to cadmium on the web's architecture, its energy content, and ultrastructure of ampullate glands. Simple food chain model (medium with 0.25 mM CdCl₂ → Drosophila hydei flies → spider (for 4 weeks or 12 months) was used for the exposure. Analysis of Cd content provided evidence that silk fibers of the web are well protected against its incorporation irrespectively of the exposure period. Long-term exposure to cadmium resulted in the occurrence of numerous autophagosomes with degenerated organelles as well as apoptotic and necrotic cells in the ampullate glands. Concurrently, the individual silk fibers building double and multiple combination complexes were significantly thinner than in the control threads. Moreover, exposed spiders spun net with smaller mean calorific value than did the control individuals. Hence, evaluation of both the diameter of silk fibers and calorific value of the web can serve as biomarkers of the effects caused by exposure of these predators to cadmium.

The Biomedical Use of Silk: Past, Present, Future

Humans have long appreciated silk for its lustrous appeal and remarkable physical properties, yet as the mysteries of silk are unraveled, it becomes clear that this outstanding biopolymer is more than a high-tech fiber. This progress report provides a critical but detailed insight into the biomedical use of silk. This journey begins with a historical perspective of silk and its uses, including the long-standing desire to reverse engineer silk. Selected silk structure-function relationships are then examined to appreciate past and current silk challenges. From this, biocompatibility and biodegradation are reviewed with a specific focus of silk performance in humans. The current clinical uses of silk (e.g., sutures, surgical meshes, and fabrics) are discussed, as well as clinical trials (e.g., wound healing, tissue engineering) and emerging biomedical applications of silk across selected formats, such as silk solution, films, scaffolds, electrospun materials, hydrogels, and particles. The journey finishes with a look at the roadmap of next-generation recombinant silks, especially the development pipeline of this new industry for clinical use.

Biomedical Applications of Recombinant Silk-Based Materials

Silk is mostly known as a luxurious textile, which originates from silkworms first cultivated in China. A deeper look into the variety of silk reveals that it can be used for much more, in nature and by humanity. For medical purposes, natural silks were recognized early as a potential biomaterial for surgical threads or wound dressings; however, as biomedical engineering advances, the demand for high-performance, naturally derived biomaterials becomes more pressing and stringent. A common problem of natural materials is their large batch-to-batch variation, the quantity available, their potentially high immunogenicity, and their fast biodegradation. Some of these common problems also apply to silk; therefore, recombinant approaches for producing silk proteins have been developed. There are several research groups which study and utilize various recombinantly produced silk proteins, and many of these have also investigated their products for biomedical applications. This review gives a critical overview over of the results for applications of recombinant silk proteins in biomedical engineering.

The rheological properties of native sericin

Unlike spider silk, spinning silkworm silk has the added intricacy of being both fibre and micron-thick glue-like coating. Whilst the natural flow properties of the fibre feedstock fibroin are now becoming more established, our understanding of the coating sericin is extremely limited and thus presents both a gap in our knowledge and a hindrance to successful exploitation of these materials. In this study we characterise sericin feedstock from the silkworm Bombyx mori in its native state and by employing both biochemical, rheological and spectroscopic tools, define a natural gold standard. Our results demonstrate that native sericin behaves as a viscoelastic shear thinning fluid, but that it does so at a considerably lower viscosity than its partner fibroin, and that its upper critical shear rate (onset of gelation) lies above that of fibroin. Together these findings provide the first evidence that in addition to acting as a binder in the construction of the cocoon, sericin is capable of lubricating the flow of fibroin within the silk gland, which has implications for future processing, modelling and biomimetic use of these materials.

STATEMENT OF SIGNIFICANCE

This study addresses one of the major gaps in our knowledge regarding natural silk spinning by providing rigorous rheological characterisation of the other major protein involved - sericin. This allows progress in silk flow modelling, biomimetic system design, and in assessing the quality of bioinspired and waste sericin materials by providing a better understanding of the native, undegraded system.

Polymorphic regenerated silk fibers assembled through bioinspired spinning

A variety of artificial spinning methods have been applied to produce regenerated silk fibers; however, how to spin regenerated silk fibers that retain the advantages of natural silks in terms of structural hierarchy and mechanical properties remains challenging. Here, we show a bioinspired approach to spin regenerated silk fibers. First, we develop a nematic silk microfibril solution, highly viscous and stable, by partially dissolving silk fibers into microfibrils. This solution maintains the hierarchical structures in natural silks and serves as spinning dope. It is then spun into regenerated silk fibers by direct extrusion in the air, offering a useful route to generate polymorphic and hierarchical regenerated silk fibers with physical properties beyond natural fiber construction. The materials maintain the structural hierarchy and mechanical properties of natural silks, including a modulus of 11 ± 4 GPa, even higher than natural spider silk. It can further be functionalized with a conductive silk/carbon nanotube coating, responsive to changes in humidity and temperature.

Analysis of the pressure requirements for silk spinning reveals a pultrusion dominated process

Silks are remarkable materials with desirable mechanical properties, yet the fine details of natural production remain elusive and subsequently inaccessible to biomimetic strategies. Improved knowledge of the natural processes could therefore unlock development of a host of bio inspired fibre spinning systems. Here, we use the Chinese silkworm Bombyx mori to review the pressure requirements for natural spinning and discuss the limits of a biological extrusion domain. This provides a target for finite element analysis of the flow of silk proteins, with the aim of bringing the simulated and natural domains into closer alignment. Supported by two parallel routes of experimental validation, our results indicate that natural spinning is achieved, not by extruding the feedstock, but by the pulling of nascent silk fibres. This helps unravel the oft-debated question of whether silk is pushed or pulled from the animal, and provides impetus to the development of pultrusion-based biomimetic spinning devices.The natural production of silks remains elusive and subsequently inaccessible to biomimetic strategies. Here the authors show that silks cannot be spun by pushing alone, and that natural spinning is dominated by pultrusion, which provides design guidelines for future biomimetic spinning systems.

The effect of ingested cadmium on the calorific value and structural properties of hunting webs produced by Steatoda grossa (Theridiidae) spiders

The study aimed to assess whether cadmium administered via ingestion to Steatoda grossa cobweb spiders (Theridiidae) affects the energy content and selected structural properties of the produced hunting webs. Cadmium content in webs was assessed with AAS and SEM X-ray microanalysis, while the diameters of silk fibers were estimated with SEM. The energy content of samples was measured in an oxygen micro-bomb calorimeter. Females and males showed different reactions to cadmium supplied through food. In comparison to females, males displayed higher metal concentrations in their bodies and hunting webs, however their calorific values and structural features were not significantly changed. Cadmium-treated females spun webs with smaller single-strand diameters and more frequent multi-stranded threads and invested 47% less energy in web production than the control individuals. It cannot be excluded that such a reduction in energy expenditure for web building in females resulted from energetically costly detoxifying reactions triggered in response to direct and indirect effects of cadmium toxicity.

Physicochemical Property Variation in Spider Silk: Ecology, Evolution, and Synthetic Production

The unique combination of great stiffness, strength, and extensibility makes spider major ampullate (MA) silk desirable for various biomimetic and synthetic applications. Intensive research on the genetics, biochemistry, and biomechanics of this material has facilitated a thorough understanding of its properties at various levels. Nevertheless, methods such as cloning, recombination, and electrospinning have not successfully produced materials with properties as impressive as those of spider silk. It is nevertheless becoming clear that silk properties are a consequence of whole-organism interactions with the environment in addition to genetic expression, gland biochemistry, and spinning processes. Here we assimilate the research done and assess the techniques used to determine distinct forms of spider silk chemical and physical property variability. We suggest that more research should focus on testing hypotheses that explain spider silk property variations in ecological and evolutionary contexts.

Properties of Engineered and Fabricated Silks

Silk is a protein-based material which is predominantly produced by insects and spiders. Hundreds of millions of years of evolution have enabled these animals to utilize different, highly adapted silk types in a broad variety of applications. Silk occurs in several morphologies, such as sticky glue or in the shape of fibers and can, depending on the application by the respective animal, dissipate a high mechanical energy, resist heat and radiation, maintain functionality when submerged in water and withstand microbial settling. Hence, it's unsurprising that silk piqued human interest a long time ago, which catalyzed the domestication of silkworms for the production of silk to be used in textiles. Recently, scientific progress has enabled the development of analytic tools to gain profound insights into the characteristics of silk proteins. Based on these investigations, the biotechnological production of artificial and engineered silk has been accomplished, which allows the production of a sufficient amount of silk materials for several industrial applications. This chapter provides a review on the biotechnological production of various silk proteins from different species, as well as on the processing techniques to fabricate application-oriented material morphologies.

Comprehensive Proteomic Analysis of Spider Dragline Silk from Black Widows: A Recipe to Build Synthetic Silk Fibers

The outstanding material properties of spider dragline silk fibers have been attributed to two spidroins, major ampullate spidroins 1 and 2 (MaSp1 and MaSp2). Although dragline silk fibers have been treated with different chemical solvents to elucidate the relationship between protein structure and fiber mechanics, there has not been a comprehensive proteomic analysis of the major ampullate (MA) gland, its spinning dope, and dragline silk using a wide range of chaotropic agents, inorganic salts, and fluorinated alcohols to elucidate their complete molecular constituents. In these studies, we perform in-solution tryptic digestions of solubilized MA glands, spinning dope and dragline silk fibers using five different solvents, followed by nano liquid chromatography coupled to tandem mass spectrometry (LC-MS/MS) analysis with an Orbitrap Fusion™ Tribrid™. To improve protein identification, we employed three different tryptic peptide fragmentation modes, which included collision-induced dissociation (CID), electron transfer dissociation (ETD), and high energy collision dissociation (HCD) to discover proteins involved in the silk assembly pathway and silk fiber. In addition to MaSp1 and MaSp2, we confirmed the presence of a third spidroin, aciniform spidroin 1 (AcSp1), widely recognized as the major constituent of wrapping silk, as a product of dragline silk. Our findings also reveal that MA glands, spinning dope, and dragline silk contain at least seven common proteins: three members of the Cysteine-Rich Protein Family (CRP1, CRP2 and CRP4), cysteine-rich secretory protein 3 (CRISP3), fasciclin and two uncharacterized proteins. In summary, this study provides a proteomic blueprint to construct synthetic silk fibers that most closely mimic natural fibers.