How to optimize seeding and culturing of human osteoblast-like cells on various biomaterials

Osteoblast-osteoclast co-cultures: A systematic review and map of available literature

Drug research with animal models is expensive, time-consuming and translation to clinical trials is often poor, resulting in a desire to replace, reduce, and refine the use of animal models. One approach to replace and reduce the use of animal models is to use in vitro cell-culture models. To study bone physiology, bone diseases and drugs, many studies have been published using osteoblast-osteoclast co-cultures. The use of osteoblast-osteoclast co-cultures is usually not clearly mentioned in the title and abstract, making it difficult to identify these studies without a systematic search and thorough review. As a result, researchers are all developing their own methods, leading to conceptually similar studies with many methodological differences and, as a consequence, incomparable results. The aim of this study was to systematically review existing osteoblast-osteoclast co-culture studies published up to 6 January 2020, and to give an overview of their methods, predetermined outcome measures (formation and resorption, and ALP and TRAP quantification as surrogate markers for formation and resorption, respectively), and other useful parameters for analysis. Information regarding these outcome measures was extracted and collected in a database, and each study was further evaluated on whether both the osteoblasts and osteoclasts were analyzed using relevant outcome measures. From these studies, additional details on methods, cells and culture conditions were extracted into a second database to allow searching on more characteristics. The two databases presented in this publication provide an unprecedented amount of information on cells, culture conditions and analytical techniques for using and studying osteoblast-osteoclast co-cultures. They allow researchers to identify publications relevant to their specific needs and allow easy validation and comparison with existing literature. Finally, we provide the information and tools necessary for others to use, manipulate and expand the databases for their needs.

Characterization and Optimization of the Seeding Process of Adipose Stem Cells on the Polycaprolactone Scaffolds

The purpose of the current study was to evaluate the usefulness of adipose-derived stem cells (ASCs) for bone injury therapy. Lipoaspirates were collected from the abdomen regions of 17 healthy female donors (mean age 49 ± 6 years) using Coleman technique or Body-jet liposuction. In the present study, the primary objective was the in vitro characteristics of human ASCs. The secondary objective was the optimization of the cell seeding process on 3D-printed scaffolds using polycaprolactone (PCL) or polycaprolactone covered with tricalcium phosphate (PCL + 5% TCP). Biological evaluation of human ASC showed high efficiency of isolation obtaining a satisfying amount of homogeneous cell populations. Results suggest that ASCs can be cultured in vitro for a long time without impairing their proliferative capacity. Growth kinetics shows that the highest number of cells can be achieved in passage 5 and after the 16^th passage; there is a significant decrease of cell numbers and their proliferative potential. The percentage of colony forming units from the adipose stem cells is 8% ± 0.63% (p < 0.05). It was observed that the accumulation of calcium phosphate in the cells in vitro, marked with Alizarin Red S, was increased along with the next passage. Analysis of key parameters critically related to the cell seeding process shows that volume of cell suspension and propagation time greatly improve the efficiency of seeding both in PCL and PCL + 5% TCP scaffolds. The cell seeding efficiency did differ significantly between scaffold materials and cell seeding methods (p < 0.001). Increased seeding efficiency was observed when using the saturation of cell suspension into scaffolds with additional incubation. Alkaline phosphatase level production in PCL + 5% TCP scaffold was better than in PCL-only scaffold. The study results can be used for the optimization of the seeding process and quantification methods determining the successful implementation of the preclinical model study in the future tissue engineering strategies.

Optimization of scanning electron microscope technique for amniotic membrane investigation: A preliminary study

OBJECTIVE

The objective of this study was to evaluate and compare the two scanning electron microscope (SEM) preparation protocols and determine the better SEM preparation technique to study stem cells on human amniotic membrane (hAM) scaffold.

MATERIALS AND METHODS

Formaldehyde-based protocol and glutaraldehyde-based protocol were compared to evaluate the quality of SEM images for stem cells cultured on hAM scaffold.

RESULTS

The results suggested that formaldehyde-based protocol is better than glutaraldehyde-based protocol in terms of showing clearer topography of the membrane as well as the boarders of the cells. To provide intact surface of the SEM sample and avoid possible ruptures of the hAM or the thin cell layer, it is recommended to perform the dehydration step using graded alcohol concentrations of 20%, 30%, 40%, 50%, 60%, 70%, 80%, and 90%, one time for each and twice in 100% for 10 min each. Gold sputter-coating step is not recommended as it does not improve the image quality.

CONCLUSIONS

To obtain clear SEM images, it is recommended to run a preliminary study to determine the better chemicals and conditions of sample preparation even when following preexisting protocols.

The Dose-Effect Relationship Between the Seeding Quantity of Human Marrow Mesenchymal Stem Cells and In Vivo Tissue-Engineered Bone Yield

Although the feasibility of human bone marrow mesenchymal stem cell (hBMMSC)-based tissue-engineered bone (TEB) has been proven in a number of studies, reaching a high positive fraction and bone yield of TEB still remains a challenge. Here we report a dose-effect relationship of the quantity of seeded cells with in vivo bone yield and the required quantity of hBMMSCs for the effective, stable bone formation of TEB. In our study, TEB was constructed using the static seeding technique with the gradient of seeding densities and volumes of passage 3 hBMMSCs. The in vitro characteristics of seeding efficiency, proliferation, viability, distribution, and osteogenic differentiation of hBMMSCs seeded on two commercial scaffolds of β-TCP and CHA were investigated using alamarBlue assay, live/dead staining, confocal laser scanning microscope, scanning electronic microscopy examination, and mRNA expression analysis of osteogenic differentiation markers. After 3 months of ectopic implantation, in vivo bone regeneration was examined by quantitative analysis of histology and micro-CT. The results showed that 10 × 10(6) cells/ml was the minimum cell seeding density for CHA and β-TCP to generate new bone in vivo. In addition, 20 × 10(6) cells/ml and 30 × 10(6) cells/ml were the saturating seeding densities for CHA and β-TCP to produce new bone effectively and stably, respectively. Thus, for different scaffolds, the saturating seeding density should be investigated first to ensure the effectiveness and stability of TEB construction with minimum donor injury, which is essential for the clinical application of TEB.

Effects of cell-attachment and extracellular matrix on bone formation in vivo in collagen-hydroxyapatite scaffolds

Cell-based tissue engineering can be used to replace missing or damaged bone, but the optimal methods for delivering therapeutic cells to a bony defect have not yet been established. Using transgenic reporter cells as a donor source, two different collagen-hydroxyapatite (HA) scaffolds, and a critical-size calvarial defect model, we investigated the effect of a cell-attachment period prior to implantation, with or without an extracellular matrix-based seeding suspension, on cell engraftment and osteogenesis. When quantitatively compared, the in-house scaffold implanted immediately had a higher mean radiopacity than in-house scaffolds incubated overnight. Both scaffold types implanted immediately had significantly higher area fractions of donor cells, while the in-house collagen-HA scaffolds implanted immediately had higher area fractions of the mineralization label compared with groups incubated overnight. When the cell loading was compared in vitro for each delivery method using the in-house scaffold, immediate loading led to higher numbers of delivered cells. Immediate loading may be preferable in order to ensure robust bone formation in vivo. The use of a secondary ECM carrier improved the distribution of donor cells only when a pre-attachment period was applied. These results have improved our understanding of cell delivery to bony defects in the context of in vivo outcomes.

Transportation conditions for prompt use of ex vivo expanded and freshly harvested clinical-grade bone marrow mesenchymal stromal/stem cells for bone regeneration

Successful preliminary studies have encouraged a more translational phase for stem cell research. Nevertheless, advances in the culture of human bone marrow-derived mesenchymal stromal/stem cells (hBM-MSC) and osteoconductive qualities of combined biomaterials can be undermined if necessary cell transportation procedures prove unviable. We aimed at evaluating the effect of transportation conditions on cell function, including the ability to form bone in vivo, using procedures suited to clinical application. hBM-MSC expanded in current Good Manufacturing Practice (cGMP) facilities (cGMP-hBM-MSC) to numbers suitable for therapy were transported overnight within syringes and subsequently tested for viability. Scaled-down experiments mimicking shipment for 18 h at 4°C tested the influence of three different clinical-grade transportation buffers (0.9% saline alone or with 4% human serum albumin [HSA] from two independent sources) compared with cell maintenance medium. Cell viability after shipment was >80% in all cases, enabling evaluation of (1) adhesion to plastic flasks and hydroxyapatite tricalcium phosphate osteoconductive biomaterial (HA/β-TCP 3D scaffold); (2) proliferation rate; (3) ex vivo osteogenic differentiation in contexts of 2D monolayers on plastic and 3D HA/β-TCP scaffolds; and (4) in vivo ectopic bone formation after subcutaneous implantation of cells with HA/β-TCP scaffold into NOD/SCID mice. Von Kossa staining was used to assess ex vivo osteogenic differentiation in 3D cultures, providing a quantifiable test of 3D biomineralization ex vivo as a rapid, cost-effective potency assay. Near-equivalent capacities for cell survival, proliferation, and osteogenic differentiation were found for all transportation buffers. Moreover, cGMP-hBM-MSC transported from a production facility under clinical-grade conditions of 4% HSA in 0.9% saline to a destination 18 h away showed prompt adhesion to HA/β-TCP 3D scaffold and subsequent in vivo bone formation. A successfully validated transportation protocol extends the applicability of fresh stem cells involving multicentric trials for regenerative medicine.

In vitro cytotoxic evaluation of processed natural coral in human osteoblasts

This study aimed to evaluate the in vitro cytotoxic effects of locally produced processed natural coral (PNC) using human osteoblasts (HOS). Cytotoxicity was not observed when HOS cells were cultured with PNC, as assessed by (3-(4,5-dimethylthiazol-2-yl)-2-5-diphenyl tetrazolium bromide; MTT) and Neutral Red (NR) assays at concentration up 200 mg/mL for up to 72 hours. Flow cytometry (FCM) analysis showed that PNC (200 mg/mL) did not decrease viability of HOS cells after 48 and 72 hours of treatment. In a cell attachment study, the HOS cells attached to the edge of the PNC disc, and later grew into the pores of the PNC disc. All results from these studies indicate that locally produced PNC material is noncytotoxic and favors the growth of HOS cells.

Tissue engineering of composite grafts: Cocultivation of human oral keratinocytes and human osteoblast-like cells on laminin-coated polycarbonate membranes and equine collagen membranes under different culture conditions

In complex craniomaxillofacial defects, the simultaneous reconstruction of hard and soft tissue is often necessary. Until now, oral keratinocytes and osteoblast-like cells have not been cocultivated on the same carrier. For the first time, the cocultivation of human oral keratinocytes and human osteoblast-like cells has been investigated in this study. Different carriers (laminin-coated polycarbonate and equine collagen membranes) and various culture conditions were examined. Human oral keratinocytes and human osteoblast-like cells from five patients were isolated from tissue samples, seeded on the opposite sides of the carriers and cultivated for 1 and 2 weeks under static conditions in an incubator and in a perfusion chamber. Proliferation and morphology of the cells were analyzed by EZ4U-tests, light microscopy, and scanning electron microscopy. Cocultivation of both cell-types seeded on one carrier was possible. Quantitative and qualitative growth was significantly better on collagen membranes when compared with laminin-coated polycarbonate membranes independent of the culture conditions. Using perfusion culture in comparison to static culture, the increase of cell proliferation after 2 weeks of cultivation when compared with the proliferation after 1 week was significantly lower, independent of the carriers used. In conclusion, the contemporaneous cultivation of human oral keratinocytes and human osteoblast-like cells on the same carrier is possible, a prerequisite for planned in vivo studies. As carrier collagen is superior to laminin-coated polycarbonate membranes. Regarding the development over time, the increase of proliferation rate is lower in perfusion culture. Examinations of cellular differentiation over time under various culture conditions will be subject of further investigations.

Bone repair by cell-seeded 3D-bioplotted composite scaffolds made of collagen treated tricalciumphosphate or tricalciumphosphate-chitosan-collagen hydrogel or PLGA in ovine critical-sized calvarial defects

The aim of this study was to investigate the osteogenic effect of three different cell-seeded 3D-bioplotted scaffolds in a ovine calvarial critical-size defect model. The choice of scaffold-materials was based on their applicability for 3D-bioplotting and respective possibility to produce tailor-made scaffolds for the use in cranio-facial surgery for the replacement of complex shaped boneparts. Scaffold raw-materials are known to be osteoinductive when being cell-seeded [poly(L-lactide-co-glycolide) (PLGA)] or having components with osteoinductive properties as tricalciumphosphate (TCP) or collagen (Col) or chitosan. The scaffold-materials PLGA, TCP/Col, and HYDR (TCP/Col/chitosan) were cell-seeded with osteoblast-like cells whether gained from bone (OLB) or from periost (OLP). In a prospective and randomized design nine sheep underwent osteotomy to create four critical-sized calvarial defects. Three animals each were assigned to the HYDR-, the TCP/Col-, or the PLGA-group. In each animal, one defect was treated with a cell-free, an OLB- or OLP-seeded group-specific scaffold, respectively. The fourth defect remained untreated as control (UD). Fourteen weeks later, animals were euthanized for histo-morphometrical analysis of the defect healing. OLB- and OLP-seeded HYDR and OLB-seeded TCP/Col scaffolds significantly increased the amount of newly formed bone (NFB) at the defect bottom and OLP-seeded HYDR also within the scaffold area, whereas PLGA-scaffolds showed lower rates. The relative density of NFB was markedly higher in the HYDR/OLB group compared to the corresponding PLGA group. TCP/Col had good stiffness to prepare complex structures by bioplotting but HYDR and PLGA were very soft. HYDR showed appropriate biodegradation, TCP/Col and PLGA seemed to be nearly undegraded after 14 weeks. 3D-bioplotted, cell-seeded HYDR and TCP/Col scaffolds increased the amount of NFB within ovine critical-size calvarial defects, but stiffness, respectively, biodegradation of materials is not appropriate for the application in cranio-facial surgery and have to be improved further by modifications of the manufacturing process or their material composition.

Combined use of RGD-peptide modified PLGA and TGF-beta1 gene transfected MSCs to improve cell biobehaviors in vitro

In order to improve the surface properties of PLGA polymer for a better material/cell interface to modulate the cells behaviors, we prepared a novel three-block copolymer, PLGA-[ASP-PEG], and immobilized an RGD-containing peptide, Gly-Arg-Gly-Asp-Ser-Pro-Cys (GRGDSPC) on the surface of it. Transforming growth factor-beta1 (TGF-beta1) was transfected into bone marrow stromal cells (MSCs) employed as seeded cells. Cell adhesion, spreading, proliferation and differentiation on this material were investigated. The results showed that the cell adhesive ratio on RGD-modified materials was higher than on un-modified materials (P<0.05). The extent of cell spreading was also wider on RGD-modified materials than on un-modified materials. Cell proliferation indices of transfected MSCs were increased as compared with the un-transfected MSCs (P<0.05). The ALP activities in the MSCs cultured with RGD-modified materials were higher than on un-modified materials after 14 days (P<0.05), and those in transfected MSCs were higher than in un-transfected MSCs (P<0.05). It was suggested that the combined use of RGD-modification and TGF-beta gene transfection could improve the interaction of biomaterial and cells.

A 3D hybrid model for tissue growth: the interplay between cell population and mass transport dynamics

To provide theoretical guidance for the design and in vitro cultivation of bioartificial tissues, we have developed a multiscale computational model that can describe the complex interplay between cell population and mass transport dynamics that governs the growth of tissues in three-dimensional scaffolds. The model has three components: a transient partial differential equation for the simultaneous diffusion and consumption of a limiting nutrient; a cellular automaton describing cell migration, proliferation, and collision; and equations that quantify how the varying nutrient concentration modulates cell division and migration. The hybrid discrete-continuous model was parallelized and solved on a distributed-memory multicomputer to study how transport limitations affect tissue regeneration rates under conditions encountered in typical bioreactors. Simulation results show that the severity of transport limitations can be estimated by the magnitude of two dimensionless groups: the Thiele modulus and the Biot number. Key parameters including the initial seeding mode, cell migration speed, and the hydrodynamic conditions in the bioreactor are shown to affect not only the overall rate, but also the pattern of tissue growth. This study lays the groundwork for more comprehensive models that can handle mixed cell cultures, multiple nutrients and growth factors, and other cellular processes, such as cell death.

Bone engineering-vitalisation of alloplastic and allogenic bone grafts by human osteoblast-like cells

Human osteoblasts on non-sintered hydroxyapatite and demineralised bone matrix (DBX) were analysed in vitro to find out whether they would be suitable for reconstruction of bones in oral surgery. Human osteoblasts were isolated from the jaw during routine dental operations and seeded onto the two biomaterials. Cells were characterised by assay of alkaline phosphatase, detection of type 1 collagen, and production of osteocalcin. After 21 days of cultivation, the cell/biomaterial constructs were examined by scanning electron microscopy, thin sections, and propidium iodide/fluorescein diacetate staining. The osteoblasts formed a vital multiple cell layer on DBX within 3 weeks of cultivation. On hydroxyapatite, the cells showed no tendency to proliferate or migrate onto the synthetic biomaterial, or to form well-spread and viable cell constructs. These findings suggest that surface morphology or the presence of osteoinductive factors may have an important role in the adhesion and proliferation of osteoblasts. Human DBX can be colonised by human osteoblast-like cells in vitro, indicating the potential of allogeneic carriers for future procedures in bone engineering.

Structural stability and bioapplicability assessment of hyaluronic acid-chitosan polyelectrolyte multilayers on titanium substrates

Since bacterial infections associated with implants remain a major cause of their failure, this study investigated the use of polyelectrolyte multilayers (PEMs) comprising hyaluronic acid (HA) and chitosan (CH) to confer antibacterial properties on titanium (Ti). HA and CH were deposited on Ti using the layer-by-layer deposition method. The antibacterial efficacy of the functionalized Ti substrates was assessed using Escherichia coli and Staphylococcus aureus. The number of adherent bacteria on Ti functionalized with HA and CH PEMs was up to an order of magnitude lower than that on the pristine Ti. The effects of chemical crosslinking of the PEMs on the structural stability and antibacterial efficacy were investigated. The chemical crosslinking of the PEMs imparts greater structural stability and preserves the antibacterial properties even after the prolonged immersion in phosphate-buffered saline. The cytotoxicity of the PEMs to osteoblasts was evaluated using the MTT assay. The results showed that the biocompatible and long-lasting antibacterial nature of the functionalized Ti substrates offers great potential for reducing implant-associated infections.

Comparative in vitro study of the proliferation and growth of ovine osteoblast-like cells on various alloplastic biomaterials manufactured for augmentation and reconstruction of tissue or bone defects

In this in vitro study ovine osteoblast-like cells were cultured on seven different alloplastic biomaterials used for augmentation and for reconstruction of bone defects in dental and craniomaxillofacial surgery. The aim of this study was to examine the growth behaviour (viability, cell density and morphology) of ovine osteoblast-like cells on the investigated biomaterials to get knowledge which biomaterial is qualified to act as a cell carrier system in further in vivo experiments. The biomaterials were either synthetically manufactured or of natural origin. As synthetically manufactured biomaterials Ethisorb, MakroSorb, PalacosR, and PDS film were used. As biomaterials of natural origin BeriplastP, Bio-Oss and Titanmesh were investigated. The cell proliferation and cell colonization were analyzed by a proliferation assay and scanning electron microscopy. Osteoblast-like cells proliferated and attached on all biomaterials, except on Beriplast. On Ethisorb the highest cell proliferation rate was measured followed by PalacosR. Both biomaterials offer suitable growth and proliferation conditions for ovine osteoblast-like cells. The proliferation rates of Bio-Oss, MakroSorb, PDS-film and Titanmesh were low and SEM examinations of these materials showed less spread osteoblast-like cells. The results showed that ovine osteoblast-like cells appear to be sensitive to substrate composition and topography. This in vitro study provides the basis for further in vivo studies using the sheep model to examine the biocompatibility and the long-term interaction between the test material and tissue (bone regeneration).

Comparativein vitro study of the proliferation and growth of human osteoblast-like cells on various biomaterials

In vitro studies about the growth behavior of osteoblasts onto biomaterials is a basic knowledge and a screening method for the development and application of scaffolds in vivo. In this in vitro study human osteoblast-like (HOB) cells were cultured on seven different biomaterials used in dental and craniomaxillofacial surgery, respectively. The tested biomaterials were synthetic biodegradable (MacroPore, Ethisorb, PDS, Beriplast P) and nonbiodegradable polymers (Palacos) as well as calcium phosphate cement (BoneSource) and titanium. The cell proliferation and cell colonization were analyzed by scanning electron microscopy and EZ4U-test. Statistical analysis were performed. HOB-like cells cultivated on Ethisorb showed the highest proliferation rate. The proliferation rate was statistically significant compared with Palacos, MacroPore, and BoneSource. Whereas, Beriplast, PDS, and titanium yielded lower proliferation rates. However, there was no statistically significant difference compared with Palacos, MacroPore, and BoneSource. SEM analysis showed no significant difference in individual cell features and cell colonization. But an infiltration and a growth of HOB-like cells throughout the porous structure of Ethisorb, which is formed by crossing fibers, is a striking different feature (macrotopography). This feature can explain the highest proliferation rate of Ethisorb. The results showed that HOB-like cells appear to be sensitive to substrate composition and topography. Moreover, the basis for further studies with such biomaterial/osteoblast constructs in vivo are provided. Further focusing points are developing techniques to fabricate three-dimensional porous biomaterial/cell constructs, studying the tissue reaction and the bone regeneration of such constructs compared with the use of autologous bone.

Photochemically Cross-Linked Collagen Gels as Three-Dimensional Scaffolds for Tissue Engineering

Collagen gels have many favorable attributes for tissue engineering, but the gels undergo dramatic contraction when cells are added because of the weak noncovalent bonds that form during spontaneous gelation. We hypothesized that photochemically cross-linking collagen gels would make suitable scaffolds for tissue engineering with favorable cell viability and minimal gel contraction. Rose Bengal and riboflavin were chosen as candidate photo-initiators for gel cross-linking using 532- and 458-nm-light wavelengths, respectively. Chondrocyte viability was measured after initial gelation for several concentrations of initiators. Cell viability and gel contraction were then measured using chondrocytes and fibroblasts over 7 days of culture. Rose Bengal used at concentrations necessary for gelation resulted in little or no cell viability. Short-term viability results showed that 0.25- or 0.5-mM concentrations of riboflavin, and 40 s of illumination permitted more than 90% cell viability. Using riboflavin concentrations of 0.25 or 0.5 mM, long-term chondrocyte viability was 113.1 +/- 11.6% and 25.4 +/- 2.7%, respectively, at day 7. Although non-cross-linked chondrocyte constructs contracted to 59.9 +/- 11.8% of their original diameter and fibroblasts contracted to 24.9 +/- 5.0% of their original diameter by day 7, the cross-linked constructs retained 88.8 +/- 7.4% and 85.5 +/- 5.0% of the original diameter, respectively. In conclusion, by photochemically cross-linking collagen gels using riboflavin and visible light, stable gel scaffolds with favorable cell survival can be produced.

Comparative in vitro study of the cell proliferation of ovine and human osteoblast‐like cells on conventionally and rapid prototyping produced scaffolds tailored for application as potential bone replacement material

Reconstruction of bone defects in the field of craniomaxillofacial surgery is a relevant problem. In regenerative medicine, autologous bone is not available sufficiently. The full replacement of autologous bone grafts is required. A promising research field is the bone engineering. Especially the application of rapid prototyping (RP) enables new perspectives concerning the scaffold design. The aim of the study was to compare scaffolds produced by RP-technology (native and plasma-coated PLGA-scaffolds) with conventionally produced scaffolds (agar plates with hydroxyapatite and hyaluronic acid coated agar plates with hydroxyapatite) relating to proliferation, adhesion, and morphology of osteoblasts to get knowledge about the application potential of such 3D-manufactured matrices for bone engineering. TissueFoil E served as reference. To compare the scaffolds, 12 ovine and 12 human osteoblast-like cell cultures of the skull were used. Results were obtained by EZ4U, scanning electron microscopy, and light microscopy. The highest cell proliferation rate of human osteoblast-like cells was measured on TissueFoil E followed by plasma-coated PLGA-scaffolds and uncoated PLGA-scaffolds, whereas of ovine osteoblast-like cells on plasma-coated PLGA-scaffolds followed by TissueFoil E and uncoated PLGA-scaffolds. Human and ovine osteoblast-like cells on coated and uncoated agar plates had significant lower proliferation rates compared with TissueFoil E and PLGA-scaffolds. These results showed the potential of RP in the field of bone engineering. Mechanical properties of such scaffolds and in vivo studies should be investigated to examine if the scaffolds hold up the pressure it will undergo long enough to allow regrowth of bone and to examine the revascularization.

Behavior of CAL72 osteoblast-like cells cultured on zirconia ceramics with different surface topographies

OBJECTIVES

Because of its inherent strength, biocompatibility, and tooth-like color, zirconia ceramics have the potential to become an alternative to titanium as dental implant material. This study aimed at investigating the osteoblastic response to yttrium-stabilized tetragonal zirconia polycrystal (Y-TZP) with different surface topographies.

METHODS

CAL72 osteoblast-like cells were cultured on machined (TZP-m), airborne particle abraded (TZP-s), and airborne particle abraded and acid-etched Y-TZP (TZP-sa) surfaces. Polystyrene and airborne particle abraded with large grit and acid-etched (SLA) titanium served as a reference control. The surface topography was examined by scanning electron microscopy (SEM) and profilometry. At culture days 3, 6, and 12, cell proliferation, at day 12 cell morphology, and cell-covered surface area were determined.

RESULTS

The surface roughness of Y-TZP was increased by airborne particle abrasion and additionally by acid etching. No statistically significant differences were found between average roughness (R(a)) and maximum peak-to-valley height (R(p-v)) values of airborne particle abraded and acid-etched Y-TZP and SLA titanium. Whereas the cell proliferation assay revealed statistically significant greater values at day 3 for surface-treated Y-TZP and polystyrene cultures as compared with machined Y-TZP, no differences between the Y-TZP groups, SLA titanium, and polystyrene were observed at culture days 6 and 12.

CONCLUSIONS

Cell morphology and cell-covered surface area were not affected by the type of substrate. The results suggest that roughened Y-TZP is an appropriate substrate for the proliferation and spreading of osteoblastic cells.

Bone formation after sinus augmentation with engineered bone

OBJECTIVES

The aim of the following investigation was to quantify the resorption rate of tissue-engineered bone grafts in the maxillary sinus using volume measurements.

MATERIAL AND METHODS

Sinus floor augmentation using autologous bone grafts from the iliac crest (n=17, group 1) was compared with commercially produced transplants of human cells seeded on polyglycolid-polylactid (PLGA) scaffolds (Oral Bone) (n=14, group 2).

RESULTS

The total resorption rate for autologous transplants 3 months post operation was 29%, while the tissue-engineered bone showed a resorption rate of 90%. The autologous bone had a bone density of up to 266-551 Hounsfield units (HU), while sufficient mineralization of tissue-engineered bone was found in only one case (152 HU).

CONCLUSION

In this clinical study, the use of autologous cancellous bone grafts in sinus augmentation was more reliable than scaffolds containing cultured osteoblasts. Further tissue-engineered bone transplants should be examined to draw general conclusions about the use of tissue-engineered grafts compared with autologous bone grafts for maxillary sinus augmentation.

Growth of human osteoblast-like cells on beta-tricalciumphosphate (TCP) membranes with different structures

Bioresorb, a bioactive, bioresorbable bone replacement material, consisting of pure beta-tricalciumphos phate (TCP) ceramic, was evaluated in cell culture with human osteoblast-like cells. The aim of our study was to investigate the influence of TCP on the growth behavior of human osteoblast-like cells. Different granule sizes and plate sizes were used in this study: Granule sizes 500-1000 microm, 1000-2000 microm and 2000-5000 microm; plate sizes 1.7 mm, 2.0 mm and 2.2 mm. Under scanning electron microscopic (SEM) observations the cell colonization on the surface of the biomaterial and the tissue compatibility were studied. Thin sections were used to study the growth of human osteoblast-like cells inside the biomaterial. It could be clearly shown that all investigated biomaterials are tissue compatible and that the size and structure (granule or plate) of the biomaterial effects the colonization rate. Bioresorb plates enhance the colonization comparable to granule. The results obtained by SEM and thin sections were confirmed immunhistochemically by the nonradioactive assay EZ4U - EASY FOR YOU.In conclusion, all investigated sizes and structures of Bioresorb are tissue compatible but the cell growth is much better on plates than on granule small in size. The results suggest that the plates may be favourable useful as scaffold for regrowth of bone.

Does seeding density affectin vitro mineral nodules formation in novel composite scaffolds?

This study investigated the human alveolar osteoblasts (AOs) proliferation and extracellular matrix formation at seeding density of 0.05, 0.1, 0.2, 0.4, and 0.8 million (M) per 3x4x4 mm3 on medical grade polycaprolactone-tricalcium phosphate (mPCL-TCP) scaffolds designed for bone regeneration. Over 80-90% of the initial seeded cells were retained in the scaffolds after 24 h. AOs bridged over pores at density of 0.2M/scaffold and below, but formed cell balls at density of 0.4M/scaffold and above. At seeding density of 0.2M and below, cell proliferation increased with time having DNA content peaked to 1600 ng/scaffold at day 21 and 28, respectively, whereas at 0.4 and 0.8M, the corresponding DNA content decreased to 1600 ng in 28 days. At day 7, higher alkaline phosphatase (ALP) activity and higher osteocalcin (OCN) secretion were detected at 0.2M/scaffold and below. After 28 days, multilayered cell-sheet formation and collagen fibers were observed at all densities. ALP and OCN in matrix and mineral nodules were found mainly at the border of AOs-scaffold construct. These findings demonstrated that the density of 0.2M and below per 3 x 4 x 4 mm(3) scaffold resulted in better cell proliferation and extracellular matrix synthesis, potentially resulting in better mineralized tissue formation.

A bioactive collagen-β tricalcium phosphate scaffold for tissue engineering

Collagen-phosphate composites (COL/β-TCP) are novel materials that have the potential to be used as bone analogues. The aim of our study was to develop a porous bioactive material composed of type I collagen, the main bone protein and tricalcium phosphate, the mineral phase of natural bone, and investigate their in vitro biocompatibility in a human dermal fibroblast culture system. In order to obtain the bioactive materials, type I collagen was isolated from bovine tendon and characterized by physicochemical methods. β-TCP was obtained from calcium carbonate by thermal decomposition at 900 °C temperature. The powder was examined with X-ray diffraction. Two variants of COL/β-TCP scaffolds (P1 and P2) were prepared and examined by scanning electron microscopy. Our results revealed a microporous structure with small white aggregates of β-TCP, non-homogenous scattered in the collagen framework without any preferential orientation. The biocompatibility of the obtained scaffolds was tested by biochemical and histological methods on human fibroblast cultures. Both materials acted as good subtrates for human dermal fibroblast proliferation and migration.

Comparison of bioengineered human bone construct from four sources of osteogenic cells

Osteoprogenitor cells have been reported to be present in periosteum, cancellous and cortical bone, and bone marrow; but no attempt to identify the best cell source for bone tissue engineering has yet been reported. In this study, we aimed to investigate the growth and differentiation pattern of cells derived from these four sources in terms of cell doubling time and expression of osteoblast-specific markers in both monolayer cells and three-dimensional cell constructs in vitro. In parallel, human plasma derived-fibrin was evaluated for use as biomaterial when forming three-dimensional bone constructs. Our findings showed osteoprogenitor cells derived from periosteum to be most proliferative followed by cortical bone, cancellous bone, and then bone marrow aspirate. Bone-forming activity was observed in constructs formed with cells derived from periosteum, whereas calcium deposition was seen throughout the constructs formed with cells derived from cancellous and cortical bones. Although no mineralization activity was seen in constructs formed with osteoprogenitor cells derived from bone marrow, well-organized lacunae as would appear in the early phase of bone reconstruction were noted. Scanning electron microscopy evaluation showed cell proliferation throughout the fibrin matrix, suggesting the possible application of human fibrin as the bioengineered tissue scaffold at non-load-bearing sites.

Cellular to tissue informatics: approaches to optimizing cellular function of engineered tissue

Tissue engineering is a rapidly expanding, multi-disciplinary field in biomedicine. It provides the ability to manipulate living cells and biomaterials for the purpose of restoring, maintaining, and enhancing tissue and organ function. Scientists have engineered various tissues in the body, from skin substitutes to artificial nerves to heart tissues, with varying degrees of success. Although the field of tissue engineering has come a long way since its first successful demonstration by Bisceglie in the 1930s, methods of coaxing them into functional tissues have been predominantly empirical to date. To successfully develop tissue-engineered organs, it is important to understand how to maintain the cells under conditions that maximize their ability to perform their physiological roles, regardless of their environment. In that context, a methodology that combines empirical data with mathematical and statistical techniques, such as metabolic engineering and cellular informatics, to systematically determine the optimal (1) type of cell to use, (2) scaffold properties and the corresponding processing conditions to achieve those properties, and (3) the required types and levels of environmental factors and the operating conditions needed in the bioreactor, will enable the design of viable and functional tissues tailored to the specific requirements of individual situations.

Tissue engineering of human cartilage and osteochondral composites using recirculation bioreactors

Chondrocytes isolated from human foetal epiphyseal cartilage were seeded dynamically into polyglycolic acid (PGA) scaffolds and cultured in recirculation column bioreactors to produce tissue-engineered cartilage. Several culture techniques with the potential to provide endogenous growth factors and other conditions beneficial for de novo cartilage synthesis were investigated. Osteochondral composite constructs were generated by seeding separate PGA scaffolds with either foetal chondrocytes or foetal osteoblasts then suturing the scaffolds together before bioreactor cultivation. This type of co-culture system provided direct contact between the tissue-engineered cartilage and developing tissue-engineered bone and yielded significant improvements in cartilage quality. In the cartilage section of the composites, the concentrations of glycosaminoglycan (GAG) and total collagen were increased by 55% and 2.5-fold, respectively, compared with control cartilage cultures, while levels of collagen type II were similar to those in the controls. The osteochondral composites were harvested from the bioreactors as single units with good integration between the cartilage and bone tissues. Only the cartilage layer contained GAG while only the bone layer was mineralised. In other experiments, co-culture of tissue-engineered cartilage with pieces of ex-vivo cartilage or ex-vivo bone did not improve the quality of the cartilage relative to control cultures. Addition of 10(-6) M diacerein to the culture medium also had no effect on the properties of engineered cartilage. This work demonstrates the beneficial effects of generating cartilage tissues in contact with developing bone. It also demonstrates the feasibility of producing composite osteochondral constructs for clinical application using recirculation column bioreactors.

Cell population dynamics modulate the rates of tissue growth processes

The development and testing of a discrete model describing the dynamic process of tissue growth in three-dimensional scaffolds is presented. The model considers populations of cells that execute persistent random walks on the computational grid, collide, and proliferate until they reach confluence. To isolate the effect of population dynamics on tissue growth, the model assumes that nutrient and growth factor concentrations remain constant in space and time. Simulations start either by distributing the seed cells uniformly and randomly throughout the scaffold, or from an initial condition designed to simulate the migration and cell proliferation phase of wound healing. Simulations with uniform seeding show that cell migration enhances tissue growth by counterbalancing the adverse effects of contact inhibition. This beneficial effect, however, diminishes and disappears completely for large migration speeds. By contrast, simulations with the "wound" seeding mode show a continual enhancement of tissue regeneration rates with increasing cell migration speeds. We conclude that cell locomotory parameters and the spatial distribution of seed cells can have profound effects on the dynamics of the process and, consequently, on the pattern and rates of tissue growth. These results can guide the design of experiments for testing the effectiveness of biomimetic modifications for stimulating tissue growth.

Hydrophobicity as a design criterion for polymer scaffolds in bone tissue engineering

Porous polymeric scaffolds play a key role in most tissue-engineering strategies. A series of non-degrading porous scaffolds was prepared, based on bulk-copolymerisation of 1-vinyl-2-pyrrolidinone (NVP) and n-butyl methacrylate (BMA), followed by a particulate-leaching step to generate porosity. Biocompatibility of these scaffolds was evaluated in vitro and in vivo. Furthermore, the scaffold materials were studied using the so-called demineralised bone matrix (DBM) as an evaluation system in vivo. The DBM, which is essentially a part of a rat femoral bone after processing with mineral acid, provides a suitable environment for ectopic bone formation, provided that the cavity of the DBM is filled with bone marrow prior to subcutaneous implantation in the thoracic region of rats. Various scaffold materials, differing with respect to composition and, hence, hydrophilicity, were introduced into the centre of DBMs. The ends were closed with rat bone marrow, and ectopic bone formation was monitored after 4, 6, and 8 weeks, both through X-ray microradiography and histology. The 50:50 scaffold particles were found to readily accommodate formation of bone tissue within their pores, whereas this was much less the case for the more hydrophilic 70:30 counterpart scaffolds. New healthy bone tissue was encountered inside the pores of the 50:50 scaffold material, not only at the periphery of the constructs but also in the center. Active osteoblast cells were found at the bone-biomaterial interfaces. These data indicate that the hydrophobicity of the biomaterial is, most likely, an important design criterion for polymeric scaffolds which should promote the healing of bone defects. Furthermore, it is argued that stable, non-degrading porous biomaterials, like those used in this study, provide an important tool to expand our comprehension of the role of biomaterials in scaffold-based tissue engineering approaches.

Bone Morphogenetic Protein 2 and Retinoic Acid Acceleratein VivoBone Formation, Osteoclast Recruitment, and Bone Turnover

Reconstruction of craniofacial defects presents a substantial biomedical burden, and requires complex surgery. Interestingly, children after age 2 years and adults are unable to heal large skull defects. This nonhealing paradigm provides an excellent model system for craniofacial skeletal tissueengineering strategies. Previous studies have documented the in vivo osteogenic potential of adipose-derived stromal (ADS) cells and bone marrow-derived stromal (BMS) cells. This study investigates the ability to accelerate in vivo osteogenesis on ex vivo recombinant human bone morphogenetic protein 2 (BMP-2) and retinoic acid stimulation. Mouse osteoblasts, ADS cells, and BMS cells were seeded onto apatite-coated PLGA scaffolds, stimulated with rhBMP-2 and retinoic acid ex vivo for 4 weeks, and subsequently implanted into critically sized (4 mm) calvarial defects. Samples were harvested after 2, 4, 8, and 12 weeks. Areas of complete bony bridging were noted as early as 2 weeks in vivo; however, osteoclasts were attracted to the scaffold as identified by calcitonin receptor staining and tartrate-resistant acid phosphatase activity staining. Although the optimal method of in vitro osteogenic priming for mesenchymal cells remains unknown, these results provide evidence that BMP-2 and retinoic acid stimulation of multipotent cells ex vivo can subsequently induce significant quantities of bone formation within a short time period in vivo.

Effects of surface undulations of biphasic calcium phosphate tablets on human osteoblast behavior

In this work, the in vitro behavior of human osteoblast cells on the undulated surfaces of biphasic calcium phosphate tablets was investigated. The tablets were produced by uniaxial pressing with convex cylindrical undulations occupying only half of the surface area; the other half was flat. Chemical and physical characterization was performed by scanning electron microscopy (SEM), atomic force microscopy (AFM), X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR). XRD and FTIR analyses revealed the presence of hydroxyapatite (HA) and alpha-tricalcium phosphate (alpha-TCP) in a well-defined ratio. Moreover, microtopography, evaluated by SEM and AFM, was similar on the flat region and on that with undulations. However, surface undulations induced different cellular arrangements, confirming the influence of the macrotopography on the cells orientation.

Search for ideal biomaterials to cultivate human osteoblast-like cells for reconstructive surgery

In this study we cultured human osteoblast-like cells on 16 different biomaterials to find an optimal biomaterial for subsequent use in reconstructive surgery. The tested biomaterials can be divided into five groups: collagen-based membranes of bovine, equine or calf origin, tricalcium phosphate based membranes (alpha and beta), hyaluronic acid based, anorganic bovine bone and anorganic silicone-based membranes. Cell proliferation and cell colonization (Environmental Scanning Electron Microscope, ESEM) analysis were performed. The results of the study demonstrated that four of the examined biomaterial/cell constructs showed a very good proliferation rate and cell density: No. 3 (Tissue Vlies), No. 7 (Sepra film), No. 16 (Biobrane) and No. 17 (Biomend). No favourable group of biomaterials was noticeable. Moreover, the results indicate that these four biomaterials as a part of bone constructs are the best tools for engineering new bone tissue. In contrast, biomaterials No. 19a (Bio-Oss) and 19b (Bio-Oss Collagen) showed the lowest proliferation rates. The result of No. 19b was improved by treatment in the perfusion chamber for 48 h as well as by additional use of vacuum. The present study is an important base for further analysis of biomaterials and consequently for the development of tissue engineering.

Biological and biophysical principles in extracorporal bone tissue engineering

The aim of this review is to characterise the biological and biophysical background of in vitro bone tissue engineering. The paper focuses on basic principles in extracorporal engineering of bone-like tissues, considering parameters such as scaffold design, tissue construction, bioreactors, and cell stimulation in vivo and in vitro. Scaffolds have a key function concerning cellular invasion and bone formation. The intra-architectural scaffold geometry, as well as the scaffold material, play an important role in the process of bone regeneration. Various types of bioreactors have been tested for their utility in bone substitute fabrication that is clinically effective and reproducible. Sophisticated bioreactor systems are those that mimic the three-dimensional morphology and the mechanical situation of bones. Mechanical stimulation as well as other biophysical stimuli appear to be critical factors for proliferation and differentiation of bone cells and for bone mineral and structure formation. Furthermore an enhancement of bone regeneration by application of chemical stimulation factors is discussed.

Attachment, proliferation, and migration of marrow stromal osteoblasts cultured on biomimetic hydrogels modified with an osteopontin-derived peptide

We prepared oligo(poly(ethylene glycol) fumarate) (OPF) hydrogels modified with a rat osteopontin-derived peptide (ODP), Asp-Val-Asp-Val-Pro-Asp-Gly-Arg-Gly-Asp-Ser-Leu-Ala-Try-Gly (DVDVPDGRGDSLAYG), as well as Gly-Arg-Gly-Asp-Ser (GRGDS) and investigated the modulation of marrow stromal osteoblast function on the peptide-modified hydrogels. Osteoblast attachment was competitively inhibited by a soluble peptide suggesting that the interaction of osteoblasts with the hydrogel was ligand specific. The proliferation index of osteoblasts relative to the initial seeding density was similar on the hydrogels modified with ODP (1.18+/-0.13) and GRGDS (1.27+/-0.12). However, fibroblasts proliferated faster on GRGDS-modified hydrogels than on ODP-modified hydrogels as evidenced by the proliferation indices of 4.89+/-0.03 and 2.42+/-0.16, respectively. A megacolony migration assay conducted for 3 days with a seeding density of 53,000 cells/cm(2) showed that osteoblasts migrated to a longer distance on ODP-modified hydrogels (0.23+/-0.06 mm/day) than on hydrogels modified with GRGDS (0.15+/-0.02 mm/day). In addition, osteoblasts migrated faster than fibroblasts seeded at the same density on ODP-modified hydrogels (0.15+/-0.11 mm/day). The migration of osteoblasts on the peptide-modified hydrogels was dependent on the peptide concentration of the hydrogels resulting in an increased migration distance with increasing the peptide concentration for the concentrations tested. These results show that OPF-based biomimetic hydrogels hold promise for modulating cell proliferation and migration for specific applications by altering the specific ligand and its concentration in the hydrogels.

Tissue-engineered bone for maxillary sinus augmentation

PURPOSE

Autologous, allogenic, and alloplastic materials for bony reconstruction in the craniomaxillofacial region have specific drawbacks stimulating the ongoing search for new materials. Cultivated skin and mucosa grafts are in clinical routine use in head and neck reconstruction but so far, to the best of our knowledge, no successful clinical application has been described of periosteum-derived tissue-engineered bone for augmentation of the edentulous posterior maxilla.

PATIENTS AND METHODS

In a clinical study, augmentation of the posterior maxilla was carried out using a bone matrix derived from mandibular periosteum cells on an Ethisorb (Ethicon, Norderstedt, Germany) fleece. In this report, we show the fabrication of the matrix, clinical application, and results in 27 patients.

RESULTS

In 18 patients, an excellent clinical, radiologic, and histologic result could be proved 3 months after augmentation. Histologically, the bone biopsy samples from these patients revealed mineralized trabecular bone with remnants of the biomaterial. An unsuccessful result was found in 8 cases with a more extended augmentation procedure. The clinical inspection 3 months after augmentation showed almost no formation of new bone. In contrast, a replacement resorption with connective tissue was found. This may be the result of failure of the initial supply of the cells embedded within large cell-polymer constructs with sufficient oxygen and nutrients to sustain their survival and proliferation and allow for the integration of the developing tissue within the surrounding tissue.

CONCLUSION

Our achieved results suggest that periosteum-derived osteoblasts on a suitable matrix can form lamellar bone within 3 months after transplantation and provide a reliable basis for simultaneous or secondary insertion of dental implants.

Adipose-derived adult stromal cells heal critical-size mouse calvarial defects

In adults and children over two years of age, large cranial defects do not reossify successfully, posing a substantial biomedical burden. The osteogenic potential of bone marrow stromal (BMS) cells has been documented. This study investigates the in vivo osteogenic capability of adipose-derived adult stromal (ADAS) cells, BMS cells, calvarial-derived osteoblasts and dura mater cells to heal critical-size mouse calvarial defects. Implanted, apatite-coated, PLGA scaffolds seeded with ADAS or BMS cells produced significant intramembranous bone formation by 2 weeks and areas of complete bony bridging by 12 weeks as shown by X-ray analysis, histology and live micromolecular imaging. The contribution of implanted cells to new bone formation was 84-99% by chromosomal detection. These data show that ADAS cells heal critical-size skeletal defects without genetic manipulation or the addition of exogenous growth factors.

Bone formation in polymeric scaffolds evaluated by proton magnetic resonance microscopy and X-ray microtomography

Magnetic resonance microscopy (MRM) and X-ray microtomography (XMT) were used to investigate de novo bone formation in porous poly(ethyl methacrylate) (PEMA) scaffolds, prepared by a novel co-extrusion process. PEMA scaffolds were seeded with primary chick calvarial osteoblasts and cultured under static conditions for up to 8 weeks. Bone formation within porous PEMA scaffolds was confirmed by the application of histologic stains to intact PEMA disks. Disks were treated with Alizarin red to visualize calcium deposits and with Sirius red to visualize regions of collagen deposition. DNA analysis confirmed that cells reached confluence on the scaffolds after 7 weeks in static culture. The formation of bone in PEMA scaffolds was investigated with water proton MRM. Quantitative MRM maps of the magnetization transfer ratio (MTR) yielded maps of protein deposition, and magnetic resonance (MR) relaxation times (T1 and T2) yielded maps of mineral deposition. The location of newly formed bone and local mineral concentrations were confirmed by XMT. By comparing MRM and XMT data from selected regions-of-interest in one sample, the inverse relationship between the MR relaxation times and mineral concentration was validated, and calibration curves for estimating the mineral content of cell-seeded PEMA scaffolds from quantitative MRM images were developed.

Osteogenic Cells Derived From Embryonic Stem Cells Produced Bone Nodules in Three-Dimensional Scaffolds

An approach for 3D bone tissue generation from embryonic stem (ES) cells was investigated. The ES cells were induced to differentiate into osteogenic precursors, capable of proliferating and subsequently differentiating into bone-forming cells. The differentiated cells and the seeded scaffolds were characterized using von Kossa and Alizarin Red staining, electron microscopy, and RT-PCR analysis. The results demonstrated that ES-derived bone-forming cells attached to and colonized the biocompatible and biodegradable scaffolds. Furthermore, these cells produced bone nodules when grown for 3-4 weeks in mineralization medium containing ascorbic acid and beta-glycerophosphate both in tissue culture plates and in scaffolds. The differentiated cells also expressed osteospecific markers when grown both in the culture plates and in 3D scaffolds. Osteogenic cells expressed alkaline phosphatase, osteocalcin, and osteopontin, but not an ES cell-specific marker, oct-4. These findings suggest that ES cell can be used for in vitro tissue engineering and cultivation of graftable skeletal structures.

Degradation and cell culture studies on block copolymers prepared by ring opening polymerization of ?-caprolactone in the presence of poly(ethylene glycol)

Poly(epsilon-caprolactone) (PCL) and its block copolymers with poly(ethylene glycol) (PEG) were prepared by ring-opening polymerization of epsilon-caprolactone in the presence of ethylene glycol or PEG, using zinc metal as catalyst. The resulting polymers were characterized by various analytical techniques such as (1)H NMR, SEC, DSC, IR, X-ray, ESEM, and CZE. PCL/PEG copolymers with long PCL chains presented the same crystalline structure as PCL homopolymer, whereas PEG-bearing short PCL blocks retained the crystalline structure of PEG and exhibited an amphiphilic behavior in aqueous solutions. Degradation of PCL and PCL/PEG diblock and triblock copolymers was realized in a 0.13 M, pH 7.4 phosphate buffer at 37 degrees C. The results indicated that the copolymers exhibited higher hydrophilicity and degradability compared with the PCL homopolymer. Large amounts of PEG were released from the bulk after 60 weeks' degradation. In vitro cell culture studies were conducted on scaffolds manufactured via solid free form fabrication by using primary human and rat bone marrow derived stromal cells (hMSC, rMSC). Light, scanning electron, and confocal laser microscopy, as well as immunocytochemistry, showed cell attachment, proliferation, and extracellular matrix production on the surface, as well as inside the scaffold architecture. Copolymers showed better performance in the cell culture studies than the PCL homopolymer.

Elastic cartilage engineering using novel scaffold architectures in combination with a biomimetic cell carrier

Tissue engineering of an elastic cartilage graft that meets the criterion for both structural and functional integration into host tissue, as well as allowing for a clinically tolerable immune response, is a challenging endeavour. Conventional scaffold technologies have limitations in their ability to design and fabricate complex-shaped matrix architectures of structural and mechanical equivalence to elastic cartilage found in the body. We attempted to investigate the potential of conventionally isolated and passaged chondrocytes (2D environment) when seeded and cultured in combination with a biomimetic hydrogel in a mechanically stable and biomimetic composite matrix to form elastic cartilage within ectopic implantation sites. In vitro cultured scaffold/hydrogel/chondrocytes constructs showed islets of cartilage and mineralized tissue formation within the cell-seeded specimens in both pig and rabbit models. Specimens with no cells seeded showed only vascularized fibrous tissue ingrowth. These studies demonstrated the potential of such scaffold/hydrogel/cell constructs to support chondrogenesis in vivo. However, it also showed that even mechanically stable scaffolds do not allow regeneration of a large mass of structural and functional cartilage within a matrix architecture seeded with 2D passaged chondrocytes in combination with a cell biomimetic carrier. Hence, future experiments will be designed to evaluate an initial 3D culture of chondrocytes, effect on cell phenotype and their subsequent culture within biomimetic 3D scaffold/cell constructs.

Nachweis der Osteokalzinexpression osteoblastärer Zellen mandibulären Ursprungs, wachsend auf Biomaterialien, mittels RT-PCR und SDS-PAGE/Western Blotting

A new approach to addressing difficult tissue reconstructive or replacement problems in the oral cavity is to engineer new tissue by using selective cell transplantation on polymer scaffolds. The current study characterized the osteoblastic nature of adherent mandibular cells on biomaterials, which could have a potential use as scaffolds for tissue engineering strategies. Cells of mandibular origin from one patient were cultivated on three different biomaterials (PepGen P-15 trade mark, Frios Algipore, and OsteoGraf/LD-700) for 7 and 14 days and osteocalcin expression was demonstrated by RT-PCR and SDS-PAGE/Western blotting. In order to explicitly characterize only the adherent cells on the biomaterials, we first separated the biomaterials with adherent cells from the culture plate before trypsinization. We could demonstrate that cell growth of adherent mandibular osteoblast-like cells was significantly higher on biomaterials with an organic component (PepGen P-15 trade mark ) in comparison to Frios Algipore and OsteoGraf/LD-700, respectively. In conclusion, only the explicit study of adherent cells at the gene and protein levels gives information about the osteoconductivity of biomaterials.