Synthetic peptides entrapped in microparticles can elicit cytotoxic T cell activity

Unleashing the potential: integrating nano-delivery systems with traditional Chinese medicine

This review explores the potential of integrating nano-delivery systems with traditional Chinese herbal medicine, acupuncture, and Chinese medical theory. It highlights the intersections and potential of nano-delivery systems in enhancing the effectiveness of traditional herbal medicine and acupuncture treatments. In addition, it discusses how the integration of nano-delivery systems with Chinese medical theory can modernize herbal medicine and make it more readily accessible on a global scale. Finally, it analyzes the challenges and future directions in this field.

Microencapsulation for Pharmaceutical Applications: A Review

In order to improve bioavailability, stability, control release, and target delivery of active pharmaceutical ingredients (APIs), as well as to mask their bitter taste, to increase their efficacy, and to minimize their side effects, a variety of microencapsulation (including nanoencapsulation, particle size <100 nm) technologies have been widely used in the pharmaceutical industry. Commonly used microencapsulation technologies are emulsion, coacervation, extrusion, spray drying, freeze-drying, molecular inclusion, microbubbles and microsponge, fluidized bed coating, supercritical fluid encapsulation, electro spinning/spray, and polymerization. In this review, APIs are categorized by their molecular complexity: small APIs (compounds with low molecular weight, like Aspirin, Ibuprofen, and Cannabidiol), medium APIs (compounds with medium molecular weight like insulin, peptides, and nucleic acids), and living microorganisms (such as probiotics, bacteria, and bacteriophages). This article provides an overview of these microencapsulation technologies including their processes, matrix, and their recent applications in microencapsulation of APIs. Furthermore, the advantages and disadvantages of these common microencapsulation technologies in terms of improving the efficacy of APIs for pharmaceutical treatments are comprehensively analyzed. The objective is to summarize the most recent progresses on microencapsulation of APIs for enhancing their bioavailability, control release, target delivery, masking their bitter taste and stability, and thus increasing their efficacy and minimizing their side effects. At the end, future perspectives on microencapsulation for pharmaceutical applications are highlighted.

Delivery of Immunostimulatory Cargos in Nanocarriers Enhances Anti-Tumoral Nanovaccine Efficacy

Finding a long-term cure for tumor patients still represents a major challenge. Immunotherapies offer promising therapy options, since they are designed to specifically prime the immune system against the tumor and modulate the immunosuppressive tumor microenvironment. Using nucleic-acid-based vaccines or cellular vaccines often does not achieve sufficient activation of the immune system in clinical trials. Additionally, the rapid degradation of drugs and their non-specific uptake into tissues and cells as well as their severe side effects pose a challenge. The encapsulation of immunomodulatory molecules into nanocarriers provides the opportunity of protected cargo transport and targeted uptake by antigen-presenting cells. In addition, different immunomodulatory cargos can be co-delivered, which enables versatile stimulation of the immune system, enhances anti-tumor immune responses and improves the toxicity profile of conventional chemotherapeutic agents.

Non-canonical inflammasome activation mediates the adjuvanticity of nanoparticles

The non-canonical inflammasome sensor caspase-11 and gasdermin D (GSDMD) drive inflammation and pyroptosis, a type of immunogenic cell death that favors cell-mediated immunity (CMI) in cancer, infection, and autoimmunity. Here we show that caspase-11 and GSDMD are required for CD8⁺ and Th1 responses induced by nanoparticulate vaccine adjuvants. We demonstrate that nanoparticle-induced reactive oxygen species (ROS) are size dependent and essential for CMI, and we identify 50- to 60-nm nanoparticles as optimal inducers of ROS, GSDMD activation, and Th1 and CD8⁺ responses. We reveal a division of labor for IL-1 and IL-18, where IL-1 supports Th1 and IL-18 promotes CD8⁺ responses. Exploiting size as a key attribute, we demonstrate that biodegradable poly-lactic co-glycolic acid nanoparticles are potent CMI-inducing adjuvants. Our work implicates ROS and the non-canonical inflammasome in the mode of action of polymeric nanoparticulate adjuvants and establishes adjuvant size as a key design principle for vaccines against cancer and intracellular pathogens.

Developing Acid-Responsive Glyco-Nanoplatform Based Vaccines for Enhanced Cytotoxic T-lymphocyte Responses Against Cancer and SARS-CoV-2

Cytotoxic T-lymphocytes (CTLs) are central for eliciting protective immunity against malignancies and infectious diseases. Here, for the first time, partially oxidized acetalated dextran nanoparticles (Ox-AcDEX NPs) with an average diameter of 100 nm are fabricated as a general platform for vaccine delivery. To develop effective anticancer vaccines, Ox-AcDEX NPs are conjugated with a representative CTL peptide epitope (CTLp) from human mucin-1 (MUC1) with the sequence of TSAPDTRPAP (referred to as Mp1) and an immune-enhancing adjuvant R837 (referred to as R) via imine bond formation affording AcDEX-(imine)-Mp1-R NPs. Administration of AcDEX-(imine)-Mp1-R NPs results in robust and long-lasting anti-MUC1 CTL immune responses, which provides mice with superior protection from the tumor. To verify its universality, this nanoplatform is also exploited to deliver epitopes from severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) to prevent coronavirus disease 2019 (COVID-19). By conjugating Ox-AcDEX NPs with the potential CTL epitope of SARS-CoV-2 (referred to as Sp) and R837, AcDEX-(imine)-Sp-R NPs are fabricated for anti-SARS-CoV-2 vaccine candidates. Several epitopes potentially contributing to the induction of potent and protective anti-SARS-CoV-2 CTL responses are examined and discussed. Collectively, these findings shed light on the universal use of Ox-AcDEX NPs to deliver both tumor-associated and virus-associated epitopes.

Emerging nanomaterials for cancer immunotherapy

Immunotherapy is a unique approach to treat cancer that targets tumours besides triggering the immune cells. It attempts to harness the supremacy and specificity of immune cells for the regression of malignancy. The key strategy of immunotherapy is that it boosts the natural defence and manipulates the immune system at both cellular and molecular levels. Long-lasting anti-tumour response, reduced metastasis, and recurrence can be achieved with immunotherapy than conventional treatments. For example, targeting cytotoxic T-lymphocyte antigen-4 (CTLA4) by monoclonal antibody is reported as an effective strategy against cancer progression in vivo and chimeric antigen receptor (CAR) modified T-cells are known to express a stronger anti-tumour activity. CTLA4 and CAR are, therefore, beneficial in cancer immunotherapy; however, in clinical settings, both are expensive and cause adverse side effects. Nanomaterials have augmented advantages in cancer immunotherapy, besides their utility in effective delivery and diagnostics. In particular, materials based on lipids, polymers, and metals have been sought-after for delivery technologies. Moreover, the surface of nanomaterials can be engineered using ligands, antigens, and antibodies to target immune cells. In this sense, checkpoint inhibitors, cytokines, agonistic antibodies, surface receptors, and engineered T-cells are promising to regulate the immune system against tumours. Therefore, emerging nanomaterials that can be used for the treatment of cancer is the prime focus of this review. The correlation of mode of administration and biodistribution of various nanomaterials is reviewed here. Besides, the acute and chronic side effects and outcome of clinical trials in the context of cancer immunotherapy are discussed.

Evaluation of Microparticulate (S)-4,5-Dihydroxy-2,3-pentanedione (DPD) as a Potential Vaccine Adjuvant

Adjuvants potentiate the immune response against co-inoculated antigens in the vaccine formulation. Based on the mechanism of action, the adjuvants are classified as immunostimulatory adjuvants and vaccine delivery systems. (S)-4,5-Dihydroxy-2,3-pentanedione (DPD) is the precursor of bacterial quorum sensing molecule, autoinducer (AI)-2. We tested the immunogenicity and adjuvant potential of microparticulate formulation of (S)-DPD via in vitro evaluation. By formulating the microparticles of (S)-DPD, we consolidated the advantages of both the classes of adjuvants. The microparticulate (S)-DPD was tested for its immunogenicity and cytotoxicity. We further tested its adjuvant effect by combining it with particulate vaccines for measles and gonorrhea and compared the adjuvant effect observed with the microparticulate formulations of the FDA-approved adjuvants alum, MPL A®, and MF59®. Microparticulate (S)-DPD was found to be non-cytotoxic towards the antigen-presenting cells and had an adjuvant effect with microparticulate gonorrhea vaccine. Further studies with additional bacterial vaccines and the in vivo evaluation will confirm the potential of microparticulate (S)-DPD as a probable vaccine adjuvant candidate.

Considerations for Size, Surface Charge, Polymer Degradation, Co-Delivery, and Manufacturability in the Development of Polymeric Particle Vaccines for Infectious Diseases

Vaccines have advanced human health for centuries. To improve upon the efficacy of subunit vaccines they have been formulated into nano/microparticles for infectious diseases. Much progress in the field of polymeric particles for vaccine formulation has been made since the push for a tetanus vaccine in the 1990s. Modulation of particle properties such as size, surface charge, degradation rate, and the co-delivery of antigen and adjuvant has been used. This review focuses on advances in the understanding of how these properties influence immune responses to injectable polymeric particle vaccines. Consideration is also given to how endotoxin, route of administration, and other factors influence conclusions that can be made. Current manufacturing techniques involved in preserving vaccine efficacy and scale-up are discussed, as well as those for progressing polymeric particle vaccines toward commercialization. Consideration of all these factors should aid the continued development of efficacious and marketable polymeric particle vaccines.

Development of multi-epitope peptide-based vaccines against SARS-CoV-2

Severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) has caused a pandemic involving so far more than 22 million infections and 776,157 deaths. Effective vaccines are urgently needed to prevent SARS-CoV-2 infections. No vaccines have yet been approved for licensure by regulatory agencies. Even though host immune responses to SARS-CoV-2 infections are beginning to be unravelled, effective clearance of virus will depend on both humoral and cellular immunity. Additionally, the presence of Spike (S)-glycoprotein reactive CD4+ T-cells in the majority of convalescent patients is consistent with its significant role in stimulating B and CD8+ T-cells. The search for immunodominant epitopes relies on experimental evaluation of peptides representing the epitopes from overlapping peptide libraries which can be costly and labor-intensive. Recent advancements in B- and T-cell epitope predictions by bioinformatic analysis have led to epitope identifications. Assessing which peptide epitope can induce potent neutralizing antibodies and robust T-cell responses is a prerequisite for the selection of effective epitopes to be incorporated in peptide-based vaccines. This review discusses the roles of B- and T-cells in SARS-CoV-2 infections and experimental validations for the selection of B-, CD4+ and CD8+ T-cell epitopes which could lead to the construction of a multi-epitope peptide vaccine. Peptide-based vaccines are known for their low immunogenicity which could be overcome by incorporating immunostimulatory adjuvants and nanoparticles such as Poly Lactic-co-Glycolic Acid (PLGA) or chitosan.

Immunology-Guided Biomaterial Design for Mucosal Cancer Vaccines

Cancer of mucosal tissues is a major cause of worldwide mortality for which only palliative treatments are available for patients with late-stage disease. Engineered cancer vaccines offer a promising approach for inducing antitumor immunity. The route of vaccination plays a major role in dictating the migratory pattern of lymphocytes, and thus vaccine efficacy in mucosal tissues. Parenteral immunization, specifically subcutaneous and intramuscular, is the most common vaccination route. However, this induces marginal mucosal protection in the absence of tissue-specific imprinting signals. To circumvent this, the mucosal route can be utilized, however degradative mucosal barriers must be overcome. Hence, vaccine administration route and selection of materials able to surmount transport barriers are important considerations in mucosal cancer vaccine design. Here, an overview of mucosal immunity in the context of cancer and mucosal cancer clinical trials is provided. Key considerations are described regarding the design of biomaterial-based vaccines that will afford antitumor immune protection at mucosal surfaces, despite limited knowledge surrounding mucosal vaccination, particularly aided by biomaterials and mechanistic immune-material interactions. Finally, an outlook is given of how future biomaterial-based mucosal cancer vaccines will be shaped by new discoveries in mucosal vaccinology, tumor immunology, immuno-therapeutic screens, and material-immune system interplay.

Nanoparticle-Based Nanomedicines to Promote Cancer Immunotherapy: Recent Advances and Future Directions

Cancer immunotherapy is a promising cancer terminator by directing the patient's own immune system in the fight against this challenging disorder. Despite the monumental therapeutic potential of several immunotherapy strategies in clinical applications, the efficacious responses of a wide range of immunotherapeutic agents are limited in virtue of their inadequate accumulation in the tumor tissue and fatal side effects. In the last decades, increasing evidences disclose that nanotechnology acts as an appealing solution to address these technical barriers via conferring rational physicochemical properties to nanomaterials. In this Review, an imperative emphasis will be drawn from the current understanding of the effect of a nanosystem's structure characteristics (e.g., size, shape, surface charge, elasticity) and its chemical modification on its transport and biodistribution behavior. Subsequently, rapid-moving advances of nanoparticle-based cancer immunotherapies are summarized from traditional vaccine strategies to recent novel approaches, including delivery of immunotherapeutics (such as whole cancer cell vaccines, immune checkpoint blockade, and immunogenic cell death) and engineered immune cells, to regulate tumor microenvironment and activate cellular immunity. The future prospects may involve in the rational combination of a few immunotherapies for more efficient cancer inhibition and elimination.

IL-33 Is a Negative Regulator of Vaccine-Induced Antigen-Specific Cellular Immunity

The cytokine IL-33 is a well-established inducer of Th2 responses. However, roles for IL-33 in promoting CD8, Th1, and T regulatory cell responses have also emerged. In this study, the role of IL-33 as a regulator of particulate vaccine adjuvant-induced Ag-specific cellular immunity was investigated. We found that polymeric nanoparticles surpassed alum in their ability to enhance Ag-specific CD8 and Th1 responses. IL-33 was a potent negative regulator of both CD8⁺ T cell and Th1 responses following i.m. vaccination with Ag and nanoparticles, whereas the cytokine was required for the nanoparticle enhancement in Ag-specific IL-10. In contrast to the effect on cellular immunity, Ab responses were comparable between vaccinated wild-type and IL-33-deficient mice. IL-33 did not compromise alum-induced adaptive cellular immunity after i.m. vaccination. These data suggest that IL-33 attenuates the induction of cellular immune responses by nanoparticulate adjuvants and should be considered in the rational design of vaccines targeting enhanced CD8 and Th1 responses.

Controlled release of antigen and Toll-like receptor ligands from PLGA nanoparticles enhances immunogenicity

AIM

Dendritic cells rapidly capture nanoparticles and induce a potent cellular immune response. It is yet unknown whether the immunological response induced by slow release of encapsulated versus soluble antigen and adjuvant is superior.

MATERIALS & METHODS

The kinetics of poly(lactic-co-glycolic acid) PLGA nanoparticles antigen release was studied by the DQ-bovine serum albumin (BSA) self-quenching antigen model. The immunological response induced was evaluated by means of dendritic cell activation/maturation markers, cytokine production and their ability to drive antigen-specific T-cell proliferation.

RESULTS & CONCLUSION

PLGA-encapsulated antigen and adjuvant showed an enhanced T-cell response when compared with soluble vaccine components by increasing antigenicity and adjuvanticity. Although the kinetic profile followed the same pattern, encapsulation increased strength and duration of the response.

Facile fabrication of varisized calcium carbonate microspheres as vaccine adjuvants

HBsAg loaded CaCO₃ microspheres with various diameters were fabricated via different mixing strategies and 1 μm particles has the strongest immune responses as vaccine adjuvant.

An oral chitosan DNA vaccine against nodavirus improves transcription of cell-mediated cytotoxicity and interferon genes in the European sea bass juveniles gut and survival upon infection

Vaccines for fish need to be improved for the aquaculture sector, with DNA vaccines and the oral administration route providing the most promising improvements. In this study, we have created an oral chitosan-encapsulated DNA vaccine (CP-pNNV) for the nodavirus (NNV) in order to protect the very susceptible European sea bass (Dicentrarchus labrax). Our data show that the oral CP-pNNV vaccine failed to induce serum circulating or neutralizing specific antibodies (immunoglobulin M) or to up-regulate their gene expression in the posterior gut. However, the vaccine up-regulated the expression of genes related to the cell-mediated cytotoxicity (CMC; tcrb and cd8a) and the interferon pathway (IFN; ifn, mx and ifng). In addition, 3 months after vaccination, challenged fish showed a retarded onset of fish death and lower cumulative mortality with a relative survival of 45%. Thus, we created a chitosan-encapsulated DNA vaccine against NNV that is partly protective to European sea bass juveniles and up-regulates the transcription of genes related to CMC and IFN. However, further studies are needed to improve the anti-NNV vaccine and to understand its mechanisms.

Adjuvanticity Regulation by Biodegradable Polymeric Nano/microparticle Size

Polymeric nano/microparticles as vaccine adjuvants have been researched in experimental and clinical studies. A more profound understanding of how the physicochemical properties regulate specific immune responses has become a vital requirement. Here we prepared poly(d,l-lactic-co-glycolic acid) (PLGA) nano/microparticles with uniform sizes (500 nm, 900 nm, 2.1 μm, and 4.9 μm), and the size effects on particle uptake, activation of macrophages, and antigen internalization were evaluated. Particle uptake kinetic studies demonstrated that 900 nm particles were the easiest to accumulate in cells. Moreover, they could induce macrophages to secrete NO and IL-1β and facilitate antigen internalization. Furthermore, 900 nm particles, mixed with antigen, could exhibit superior adjuvanticity in both humoral and cellular immune responses in vivo, including offering the highest antibody protection, promoting the maximum secretion levels of IFN-γ and IL-4 than particles with other sizes. Overall, 900 nm might be the optimum choice for PLGA particle-based vaccine adjuvants especially for recombinant antigens. Understanding the effect of particle size on the adjuvanticity based immune responses might have important enlightenments for rational vaccine design and applications.

Modulation of Immune Responses by Particulate Materials

Many biomaterials that are in both preclinical and clinical use are particulate in nature and there is a growing appreciation that the physicochemical properties of materials have a significant impact on their efficacy. The ability of particulates to modulate adaptive immune responses has been recognized for the past century but it is only in recent decades that a mechanistic understanding of how particulates can regulate these responses has emerged. It is now clear that particulate characteristics including size, charge, shape and porosity can influence the scale and nature of both the innate and adaptive immune responses. The potential to tailor biomaterials in order to regulate the type of innate immune response induced, offers significant opportunities in terms of designing systems with increased immune-mediated efficacy.

Tartrate/tripolyphosphate as co-crosslinker for water soluble chitosan used in protein antigens encapsulation

In drug delivery research, several toxic chemical crosslinkers and non-toxic ionic crosslinkers have been exploited for the synthesis of microparticles from acetic acid soluble chitosan. This paper hypothesized the implementation of sodium potassium tartrate (SPT) as an alternative crosslinker for sodium tripolyphosphate (TPP) and SPT/TPP co-crosslinkers for synthesis of the microparticles using water soluble chitosan (WSC) for encapsulation of Bovine serum albumin (BSA) as a model protein, and Tetanus toxoid (TT) as a model vaccine. The crosslinking was confirmed by FT-IR, SEM with EDS. The XRD entailed molecular dispersion of proteins and thermal analysis confirmed the higher stability of STP/TPP co-crosslinked formulations. The resultant microparticles were exhibiting crosslinking degree (52-67%), entrapment efficiency (72-80%), particle size (0.3-1.7μm), zeta potential (+24 to 46mV) and mucoadhesion (41-68%). The superiority of SPT over TPP was confirmed by higher crosslinking degree and entrapment efficiency. However, co-crosslinking were advantageous in higher regression values for Langmuir adsorption isotherm, slower swelling tendency and extended 30days controlled in-vitro release study. TT release obeyed the Quasi-Fickian diffusion mechanism for single and cocrosslinked formulations. Overall, in crosslinking of chitosan as biological macromolecules, STP/TPP may be alternative for single ionic crosslinked formulations for protein antigen delivery.

PLGA particulate delivery systems for subunit vaccines: Linking particle properties to immunogenicity

Among the emerging subunit vaccines are recombinant protein- and synthetic peptide-based vaccine formulations. However, proteins and peptides have a low intrinsic immunogenicity. A common strategy to overcome this is to co-deliver (an) antigen(s) with (an) immune modulator(s) by co-encapsulating them in a particulate delivery system, such as poly(lactic-co-glycolic acid) (PLGA) particles. Particulate PLGA formulations offer many advantages for antigen delivery as they are biocompatible and biodegradable; can protect the antigens from degradation and clearance; allow for co-encapsulation of antigens and immune modulators; can be targeted to antigen presenting cells; and their particulate nature can increase uptake and cross-presentation by mimicking the size and shape of an invading pathogen. In this review we discuss the pros and cons of using PLGA particulate formulations for subunit vaccine delivery and provide an overview of formulation parameters that influence their adjuvanticity and the ensuing immune response.

The Use of Synthetic Carriers in Malaria Vaccine Design

Malaria vaccine research has been ongoing since the 1980s with limited success. However, recent improvements in our understanding of the immune responses required to combat each stage of infection will allow for intelligent design of both antigens and their associated delivery vaccine vehicles/vectors. Synthetic carriers (also known as vectors) are usually particulate and have multiple properties, which can be varied to control how an associated vaccine interacts with the host, and consequently how the immune response develops. This review comprehensively analyzes both historical and recent studies in which synthetic carriers are used to deliver malaria vaccines. Furthermore, the requirements for a synthetic carrier, such as size, charge, and surface chemistry are reviewed in order to understand the design of effective particle-based vaccines against malaria, as well as providing general insights. Synthetic carriers have the ability to alter and direct the immune response, and a better control of particle properties will facilitate improved vaccine design in the near future.

Respiratory nanoparticle-based vaccines and challenges associated with animal models and translation

Vaccine development has had a huge impact on human health. However, there is a significant need to develop efficacious vaccines for several existing as well as emerging respiratory infectious diseases. Several challenges need to be overcome to develop efficacious vaccines with translational potential. This review focuses on two aspects to overcome some barriers — 1) the development of nanoparticle-based vaccines, and 2) the choice of suitable animal models for respiratory infectious diseases that will allow for translation. Nanoparticle-based vaccines, including subunit vaccines involving synthetic and/or natural polymeric adjuvants and carriers, as well as those based on virus-like particles offer several key advantages to help overcome the barriers to effective vaccine development. These include the ability to deliver combinations of antigens, target the vaccine formulation to specific immune cells, enable cross-protection against divergent strains, act as adjuvants or immunomodulators, allow for sustained release of antigen, enable single dose delivery, and potentially obviate the cold chain. While mouse models have provided several important insights into the mechanisms of infectious diseases, they are often a limiting step in translation of new vaccines to the clinic. An overview of different animal models involved in vaccine research for respiratory infections, with advantages and disadvantages of each model, is discussed. Taken together, advances in nanotechnology, combined with the right animal models for evaluating vaccine efficacy, has the potential to revolutionize vaccine development for respiratory infections.

Adjuvants in micro- to nanoscale: current state and future direction

Adjuvants have been used in vaccines for over 70 years to promote long-lived and sterilizing immunity. Since then, various adjuvant systems were developed by combining nanotechnology with natural and/or synthetic immunomodulatory molecules. These systems are biocompatible, immunogenic, and possess higher antigen carrying capacity. This article showcases advancements made in the adjuvant systems formulations, their synthesis routes, and the improvement of these adjuvants have brought in response to combat against ongoing global health threats such as malaria, hepatitis C, universal influenza, and human immunodeficiency virus. This review also highlights the interaction of adjuvants with the delivery of antigens to cells and unfolds mechanism of actions. In addition, this review discusses the physicochemical factors responsible for the efficient interaction of nanoadjuvants with antigen receptors to develop more effective, less reactogenic, and multifunctional systems for the next generation vaccines.

Fabrication of chitosan microspheres using vanillin/TPP dual crosslinkers for protein antigens encapsulation

Microspheres were prepared from water soluble chitosan using dual vanillin/TPP crosslinkers. Placebo (C1), Bovine serum albumin (BSA) (C2), monovalent tetanus toxoid (TT) (C3) and divalent tetanus (TT) and diphtheria toxoids (DT) (C4) encapsulated microspheres were studied in terms of size (1-4 μm), encapsulation efficiency (75-80%), swelling and mucoadhesion (56-68%). FT-IR, TGA, XRD and SEM characterization of microspheres suggested specific interaction, more thermal stability, amorphous nature and rough surfaces of encapsulated microspheres. EDS confirmed the co-crosslinking and ninhydrin tests were showing higher crosslinking density. Zeta potential was 47.7 to 66.2 +mV indicating the potential stability of the colloidal system. Equilibrium adsorption isotherms described encapsulated microspheres followed the Langmuir isotherm model, suggesting monolayer adsorption of the mucin on microspheres. In-vitro release studies up to four weeks indicated zero order kinetics and obeyed swelling-controlled super case II transport release mechanism. Thus, the present study could be helpful in developing the multivalent oral vaccine.

Immunoadjuvant activity of the nanoparticles' surface modified with mannan

Mannan (MN) is the natural ligand for mannose receptors, which are widely expressed on dendritic cells (DCs). The purpose of this study was to assess the effect of formulation parameters on the immunogenicity of MN-decorated poly (D, L-lactide-co-glycolide) (PLGA) nanoparticles (NPs) in terms of their ability to stimulate DC phenotypic as well as functional maturation. For this purpose, NPs were formulated from either ester-terminated or COOH-terminated PLGA. Incorporation of MN in NPs was achieved through encapsulation, physical adsorption or chemical conjugation. Murine bone marrow derived DCs (BMDCs) were treated with various NP formulations and assessed for their ability to up-regulate DC cell surface markers, secrete immunostimulatory cytokines and to activate allogenic T cell responses. DCs treated with COOH-terminated PLGA-NPs containing chemically conjugated MN (MN-Cov-COOH) have shown superior performance in improving DC biological functions, compared to the rest of the formulations tested. This may be attributed to the higher level of MN incorporation in the former formulation. Incorporation of MN in PLGA NPs through chemical conjugation can lead to enhanced DC maturation and stimulatory function. This strategy may be used to develop more effective PLGA-based vaccine formulations.

A biodegradable nanoparticle platform for the induction of antigen-specific immune tolerance for treatment of autoimmune disease

Targeted immune tolerance is a coveted therapy for the treatment of a variety of autoimmune diseases, as current treatment options often involve nonspecific immunosuppression. Intravenous (iv) infusion of apoptotic syngeneic splenocytes linked with peptide or protein autoantigens using ethylene carbodiimide (ECDI) has been demonstrated to be an effective method for inducing peripheral, antigen-specific tolerance for treatment of autoimmune disease. Here, we show the ability of biodegradable poly(lactic-co-glycolic acid) (PLG) nanoparticles to function as a safe, cost-effective, and highly efficient alternative to cellular carriers for the induction of antigen-specific T cell tolerance. We describe the formulation of tolerogenic PLG particles and demonstrate that administration of myelin antigen-coupled particles both prevented and treated relapsing-remitting experimental autoimmune encephalomyelitis (R-EAE), a CD4 T cell-mediated mouse model of multiple sclerosis (MS). PLG particles made on-site with surfactant modifications surpass the efficacy of commercially available particles in their ability to couple peptide and to prevent disease induction. Most importantly, myelin antigen-coupled PLG nanoparticles are able to significantly ameliorate ongoing disease and subsequent relapses when administered at onset or at peak of acute disease, and minimize epitope spreading when administered during disease remission. Therapeutic treatment results in significantly reduced CNS infiltration of encephalitogenic Th1 (IFN-γ) and Th17 (IL-17a) cells as well as inflammatory monocytes/macrophages. Together, these data describe a platform for antigen display that is safe, low-cost, and highly effective at inducing antigen-specific T cell tolerance. The development of such a platform carries broad implications for the treatment of a variety of immune-mediated diseases.

Adjuvanted poly(lactic-co-glycolic) acid nanoparticle-entrapped inactivated porcine reproductive and respiratory syndrome virus vaccine elicits cross-protective immune response in pigs

Porcine reproductive and respiratory syndrome (PRRS), caused by the PRRS virus (PRRSV), is an economically devastating disease, causing daily losses of approximately $3 million to the US pork industry. Current vaccines have failed to completely prevent PRRS outbreaks. Recently, we have shown that poly(lactic-co-glycolic) acid (PLGA) nanoparticle-entrapped inactivated PRRSV vaccine (NP-KAg) induces a cross-protective immune response in pigs. To further improve its cross-protective efficacy, the NP-KAg vaccine formulation was slightly modified, and pigs were coadministered the vaccine twice intranasally with a potent adjuvant: Mycobacterium tuberculosis whole-cell lysate. In vaccinated virulent heterologous PRRSV-challenged pigs, the immune correlates in the blood were as follows: 1) enhanced PRRSV-specific antibody response with enhanced avidity of both immunoglobulin (Ig)-G and IgA isotypes, associated with augmented virus-neutralizing antibody titers; 2) comparable and increased levels of virus-specific IgG₁ and IgG₂ antibody subtypes and production of high levels of both T-helper (Th)-1 and Th2 cytokines, indicative of a balanced Th1–Th2 response; 3) suppressed immunosuppressive cytokine response; 4) increased frequency of interferon-γ⁺ lymphocyte subsets and expanded population of antigen-presenting cells; and most importantly 5) complete clearance of detectable replicating challenged heterologous PRRSV and close to threefold reduction in viral ribonucleic acid load detected in the blood. In conclusion, intranasal delivery of adjuvanted NP-KAg vaccine formulation to growing pigs elicited a broadly cross-protective immune response, showing the potential of this innovative vaccination strategy to prevent PRRS outbreaks in pigs. A similar approach to control other respiratory diseases in food animals and humans appears to be feasible.

Biodegradable particles as vaccine antigen delivery systems for stimulating cellular immune responses

There is a need for both new and improved vaccination formulations for a range of diseases for which current vaccines are either inadequate or non-existent. Biodegradable polymer-based vaccines fulfill many of the desired properties in achieving effective long-term protection in a manner that is safe, economical, and potentially more practicable on a global scale. Here we discuss some of the work performed with micro/nanoparticles made from either synthetic (poly[lactic-co-glycolic acid] [PLGA] and polyanhydrides) or natural (chitosan) biodegradable polymers. Our attention is focused on, but not limited to, the generation of antitumor immunity where we stress the importance of particle size and co-delivery of antigen and adjuvant.

Poly(lactide-co-glycolide)-rifampicin nanoparticles efficiently clear Mycobacterium bovis BCG infection in macrophages and remain membrane-bound in phago-lysosomes

Nanoparticles (NPs) are increasingly used as biodegradable vehicles to selectively deliver therapeutic agents such as drugs or antigens to cells. The most widely used vehicle for this purpose is based on copolymers of lactic acid and glycolic acid (PLGA) and has been extensively used in experiments aimed at delivering antibiotics against Mycobacterium tuberculosis in animal models of tuberculosis. Here, we describe fabrication of PLGA NPs containing either a high concentration of rifampicin or detectable levels of the green fluorescent dye, coumarin-6. Our goal here was twofold: first to resolve the controversial issue of whether, after phagocytic uptake, PLGA NPs remain membrane-bound or whether they escape into the cytoplasm, as has been widely claimed. Second, we sought to make NPs that enclosed sufficient rifampicin to efficiently clear macrophages of infection with Mycobacterium bovis BCG. Using fluorescence microscopy and immuno-electron microscopy, in combination with markers for lysosomes, we show that BCG bacteria, as expected, localized to early phagosomes, but that at least 90% of PLGA particles were targeted to, and remained in, low pH, hydrolase-rich phago-lysosomes. Our data collectively argue that PLGA NPs remain membrane-enclosed in macrophages for at least 13 days and degrade slowly. Importantly, provided that the NPs are fabricated with sufficient antibiotic, one dose given after infection is sufficient to efficiently clear the BCG infection after 9-12 days of treatment, as shown by estimates of the number of bacterial colonies in vitro.

Re-considering how particle size and other properties of antigen-adjuvant complexes impact on the immune responses

Understanding the influences of particle properties of antigen-adjuvant complexes on immunity is crucial in designing highly active adjuvants for new-generation of vaccines. This paper briefly revisits the current opinions on the size-dependent immunity of various adjuvant particles and then comprehensively discusses a few immunity-determining processes that are affected by the antigen-adjuvant particle properties. These include particle size, surface charge, surface hydrophilicity/lipophilicity, and antigen-adjuvant binding strength. Based on current understandings, we hypothesize that a maximum immune response occurs at a certain antigen-adjuvant particle size. This hypothesis clearly explains the paradoxical opinions on the size-dependent immunity and has also been supported by the data reported by several research groups. Finally, we further hypothesize that there is a similar relationship between any immune response and any measureable antigen-adjuvant particle property, and that there is a maximum immune response when all measureable antigen-adjuvant particle properties are optimized. We believe more attention should be paid to this issue when designing and developing effective adjuvants in future research.

Nanovectorized radiotherapy: a new strategy to induce anti-tumor immunity

Recent experimental findings show that activation of the host immune system is required for the success of chemo- and radiotherapy. However, clinically apparent tumors have already developed multiple mechanisms to escape anti-tumor immunity. The fact that tumors are able to induce a state of tolerance and immunosuppression is a major obstacle in immunotherapy. Hence, there is an overwhelming need to develop new strategies that overcome this state of immune tolerance and induce an anti-tumor immune response both at primary and metastatic sites. Nanovectorized radiotherapy that combines ionizing radiation and nanodevices, is one strategy that could boost the quality and magnitude of an immune response in a predictable and designable fashion. The potential benefits of this emerging treatment may be based on the unique combination of immunostimulatory properties of nanoparticles with the ability of ionizing radiation to induce immunogenic tumor cell death. In this review, we will discuss available data and propose that the nanovectorized radiotherapy could be a powerful new strategy to induce anti-tumor immunity required for positive patient outcome.

Intranasal immunisation of mice against Streptococcus equi using positively charged nanoparticulate carrier systems

In order to potentiate a strong immune response after mucosal vaccination with a low immunogenic S. equi enzymatic extract, two positively charged particulate delivery systems (liposomes and nanoparticles) were created. Positively surface charged particles were expected to efficiently bind to negatively charged cell membranes and facilitate antigen uptake. Phosphatidylcholine-cholesterol-stearylamine liposomes encapsulating S. equi antigens were prepared and dimensionated to 0.22±0.01μm with a polydispersity index <0.242, zeta potential of +12±4mV and an encapsulation efficiency of 13±3% (w/w). Chitosan nanoparticles were prepared by ionotropic gelation with sodium tripolyphosphate, presenting a particle size of 0.17±0.01μm with polydispersity index <0.362, zeta potential of +23±8mV and an encapsulation efficiency of 53±6% (w/w). Both encapsulation methods were recognised as innocuous once antigens structure remained intact after incorporation as assessed by SDS-PAGE. Intranasal immunisation of mice with both formulations successfully elicited mucosal, humoral and cellular immune responses. Mucosal stimulation was confirmed by increased sIgA levels in the lungs, being the chitosan nanoparticles more successful in this achievement probably due to their different mucoadhesive properties. Both formulations share the ability to induce Th1-mediated immune responses characterised by IFN-γ production and high IgG2a antibody titers as well as a Th2 immune response characterised mainly by IL-4 production and IgG1 antibodies.

Physical and chemical strategies for therapeutic delivery by using polymeric nanoparticles

A significant challenge that most therapeutic agents face is their inability to be delivered effectively. Nanotechnology offers a solution to allow for safe, high-dose, specific delivery of pharmaceuticals to the target tissue. Nanoparticles composed of biodegradable polymers can be designed and engineered with various layers of complexity to achieve drug targeting that was unimaginable years ago by offering multiple mechanisms to encapsulate and strategically deliver drugs, proteins, nucleic acids, or vaccines while improving their therapeutic index. Targeting of nanoparticles to diseased tissue and cells assumes two strategies: physical and chemical targeting. Physical targeting is a strategy enabled by nanoparticle fabrication techniques. It includes using size, shape, charge, and stiffness among other parameters to influence tissue accumulation, adhesion, and cell uptake. New methods to measure size, shape, and polydispersity will enable this field to grow and more thorough comparisons to be made. Physical targeting can be more economically viable when certain fabrication techniques are used. Chemical targeting can employ molecular recognition units to decorate the surface of particles or molecular units responsive to diseased environments or remote stimuli. In this review, we describe sophisticated nanoparticles designed for tissue-specific chemical targeting that use conjugation chemistry to attach targeting moieties. Furthermore, we describe chemical targeting using stimuli responsive nanoparticles that can respond to changes in pH, heat, and light.

Vaccine adjuvants - Current status and prospects on controlled release adjuvancity

The strategy of World Health Organization is to develop efficient and inexpensive vaccine against various infectious diseases amongst children's population. Vaccination is considered as the most cost effective health intervention known to public. Since 90 years various substances have been added in vaccine formulation but still alum is considered as the safest adjuvant for human use licensed by United States Food and Drug Administration. MF 59 and ASO4 are the adjuvants were developed recently and approved for human use. Due to poor adjuvancity, conventional vaccines require multiple recall injection at approximately time intervals to attain optimal immune response. For past approximately two decades the vaccine research has been focused towards the alternation of alum type of adjuvant in order to increase the immunogenicity. The development of new vaccines, is more efficacious or easier to deliver, or both have become an area of research that can certainly benefit from controlled release technology. Especially, the conversion of multiple administration vaccine into single administration vaccine may represent an improved advancement towards the betterment of human health care and welfare. Biodegradable polymer microparticles have been evaluated for delivering antigens in native form, sustained release keeping in mind the safety aspects. In this article we review the overall concept of adjuvants in vaccine technology with special focus towards the prospects of controlled release antigens.

Targeting dendritic cells with nano-particulate PLGA cancer vaccine formulations

Development of safe and effective cancer vaccine formulation is a primary focus in the field of cancer immunotherapy. The recognition of the crucial role of dendritic cells (DCs) in initiating anti-tumor immunity has led to the development of several strategies that target vaccine antigens to DCs as an attempt for developing potent, specific and lasting anti-tumor T cell responses. The main objective of this review is to provide an overview on the application of poly (d,l-lactic-co-glycolic acid) nanoparticles (PLGA-NPs) as cancer vaccine delivery system and highlight their potential in the development of future therapeutic cancer vaccines. PLGA-NPs containing antigens along with immunostimulatory molecules (adjuvants) can not only target antigen actively to DCs, but also provide immune activation and rescue impaired DCs from tumor-induced immuosupression.

Robust IgG responses to nanograms of antigen using a biomimetic lipid-coated particle vaccine

New subunit vaccine formulations with increased potency are of interest to improve immune responses against poorly immunogenic antigens, to avoid vaccine shortages in pandemic situations, and to promote dose-sparing of potent adjuvant molecules that can cause unacceptable side effects in prophylactic vaccination. Here we report strong class-switched, high avidity humoral immune responses elicited by a vaccine system based on poly(lactide-co-glycolide) micro- or nano-particles enveloped by PEGylated phospholipid bilayers, with protein antigens covalently anchored to the lipid surface and lipophilic adjuvants inserted in the bilayer coating. Strikingly, these particles elicited high endpoint antigen-specific IgG titers (>10(6)) sustained for over 100 days after two immunizations with as little as 2.5 ng of antigen. At such low doses, the conventional adjuvant alum or the molecular adjuvants monophosphoryl lipid A (MPLA) or α-galactosylceramide (αGC) failed to elicit responses. Co-delivery of antigen with MPLA or αGC incorporated into the particle bilayers in a pathogen-mimetic fashion further enhanced antibody titers by ~12-fold. MPLA provided the highest sustained IgG titers at these ultra-low antigen doses, while αGC promoted a rapid rise in serum IgG after one immunization, which may be valuable in emergencies such as disease pandemics. The dose of αGC required to boost the antibody response was also spared by particulate delivery. Lipid-enveloped biodegradable micro- and nano-particles thus provide a potent dose-sparing platform for vaccine delivery.

Particulate vaccines: on the quest for optimal delivery and immune response

Subunit vaccines offer a safer alternative to traditional organism-based vaccines, but their immunogenicity is impaired. This hurdle might be overcome by the use of micro- and nanodelivery systems carrying the antigen(s). This review discusses the rationale for the use of particulate vaccines and provides an overview of antigen-delivery vehicles currently under investigation. It further highlights the cellular uptake, antigen processing and the presentation by antigen-presenting cells because these processes are partially governed by particle characteristics and eventually determine the immunological outcome. Finally, we address the attractive concept of concomitant delivery of antigens and immunopotentiators. The condensed knowledge could be an asset for rationally designing antigen-delivery vehicles to obtain safe and efficacious vaccines.

Nano-microparticles as immune adjuvants: correlating particle sizes and the resultant immune responses

The development of novel immune adjuvants is emerging as a significant area of vaccine delivery based on the continued necessity to amplify immune responses to a wide array of new antigens that are poorly immunogenic. This article specifically focuses on the application of nanoparticles and microparticles as vaccine adjuvants. Many investigators are in agreement that the size of the particles is crucial to their adjuvant activities. However, reports on correlating the size of particle-based adjuvants and the resultant immune responses have been conflicting, with investigators on both sides of the fence with impressive data in support of the effectiveness of particles with small sizes (submicron) over those with larger sizes (micron) and vice versa, while other investigators reported data that showed submicron- and micron-sized particles are effective to the same degree as immune adjuvants. We have generated a list of biological, immunological and, more importantly, vaccine formulation parameters that may have contributed to the inconsistency from different studies and made recommendations on future studies attempting to correlate the size of particulate adjuvants and the immune responses induced. The information gathered could lead to strategies to optimize the performance of nano-microparticles as immune adjuvants.

Surface modification of poly(D,L-lactic-co-glycolic acid) nanoparticles with protamine enhanced cross-presentation of encapsulated ovalbumin by bone marrow-derived dendritic cells

Cross-presentation is the key process in stimulation of cytotoxic T lymphocyte (CTL) immune response in eliminating many infectious diseases and tumors. Previous studies have shown that surface modification of poly(D,L-lactic-co-glycolic acid) (PLGA) particles with polycations enhanced their adjuvant ability resulting in a strong antibody response to the encapsulated antigen. However, the in vitro cross-presentation by protamine-coated PLGA nanoparticles (NPs) has not been addressed yet. In this study, a model antigen ovalbumin (OVA) was encapsulated into PLGA nanoparticles, with (OVA-NPs/protamine) or without protamine coating (OVA-NPs). These nanoparticles were then used to stimulate murine bone marrow-derived dendritic cells (BMDCs). Flow cytometry analysis revealed an increase in endocytosis of protamine-coated PLGA nanoparticles by BMDCs at 37°C. Compared with OVA-NPs-treated BMDCs, stimulation with OVA-NPs/protamine led to significantly upregulation of CD80, CD86, and CD83, increased secretion of IL-12p70, and decreased production of IL-4 by BMDCs. Furthermore, OVA-NPs/protamine-treated BMDCs also showed an enhanced cross-presentation to B3Z T cell hybridoma in vitro. Transmission electron microscopy (TEM) study showed that protamine-coated PLGA nanoparticles escaped from lysosomes through the interaction with lysosomal membrane. These results demonstrated that protamine-coated PLGA nanoparticles could enhance the cross-presentation of encapsulated exogenous antigen by facilitating antigen uptake and lysosomal escape, suggesting the feasibility to be a potent adjuvant for cellular vaccines.