The remineralisation of enamel: a review of the literature

Next-Generation Strategies for Enamel Repair and Regeneration: Advances in Biomaterials and Translational Challenges

BACKGROUND

Enamel regeneration and remineralization are critical for restoring enamel integrity, as natural enamel lacks the ability to regenerate due to the absence of ameloblasts. The increasing prevalence of dental caries and the irreversible nature of enamel damage highlight the need for advanced repair strategies.

METHODS

This review examines the latest advancements in enamel regeneration and remineralization, focusing on biomaterials, nanotechnology-based approaches, and bioengineering strategies. Google Scholar, Scopus (Elsevier), and PubMed databases were used for the selection of literature. The search included key terms such as "enamel regeneration," "biomimetic enamel repair," "stem cell-based enamel regeneration," "nanotechnology in enamel repair," "hydroxyapatite enamel remineralization," and "biomaterials for enamel remineralization."

RESULTS

Various strategies have been explored for enamel remineralization, including self-assembling peptides, dendrimers, hydrogels, and electrospun mats, each demonstrating varying success in laboratory and preclinical studies. While casein-phosphopeptide-stabilized amorphous calcium phosphate (CPP-ACP) combined with fluoride remains a widely used clinical remineralization agent, integrating CPP-ACP with nanotechnology is an emerging area requiring further research. Enamel bioengineering approaches utilizing stem/progenitor cells offer potential, though challenges remain in achieving clinical translation.

CONCLUSION

Despite advancements, replicating the hierarchical structure and mechanical properties of natural enamel remains challenging. Nanotechnology-driven approaches, bioengineered scaffolds, and interdisciplinary collaboration hold promise for optimizing enamel regeneration techniques. Further research is necessary to enhance clinical applicability and develop scalable, effective treatments for enamel restoration.

Effect of calcium and calcium-fluoride phytate as active fillers in dental resin-based composites on chemical and physical properties

OBJECTIVES

This study aims to synthesize, characterize, and evaluate calcium phytate (Ca-PA) and fluorinated calcium phytate (Ca-PA-F) as novel active fillers in resin-based dental composites (RBCs). The hypothesis assumes that these fillers will provide remineralization potential through calcium and fluoride ion release while maintaining satisfactory physicochemical properties.

METHODS

Ca-PA and Ca-PA-F fillers were synthesized, characterized using various spectroscopic and microscopic techniques, and incorporated into methacrylate-based RBCs at a filler fraction of 65 vol% (≈30 wt%). The composites were polymerized and evaluated for degree of conversion (DC), depth of cure (DOC), polymerization shrinkage (PS), mechanical properties (compressive strength [CS], flexural strength [FS]), water sorption (SP), solubility (SL), also after 35 days of incubation, color, opacity, and calcium and fluoride release over 35 days in saline.

RESULTS

Both experimental composites exhibited high DC (>70 %), DOC (>3 mm), and moderate PS (4.18-6.19 %). Ca-PA-c showed superior CS (351.6 MPa) and FS (53.9 MPa), while Ca-PA-F-c had lower CS (246.3 MPa) and FS (43.5 MPa). Excessive SP (>40 µg·mm⁻³) and high SL after 35 days of incubation, especially for Ca-PA-F-c, were observed. Both materials released calcium ions, with Ca-PA-F-c also releasing fluoride, showing the remineralizing potential.

SIGNIFICANCE

Phytate-based fillers provide a promising alternative for RBCs with remineralization potential. However, improvements in filler dispersion, flexural strength, and long-term mass stability are needed. Future work should focus on filler silanization or hybridization with conventional fillers to enhance mechanical performance while maintaining the ability to ions release.

The Effect of Different pH and Temperature Values on Ca2+, F-, PO43-, OH-, Si, and Sr2+ Release from Different Bioactive Restorative Dental Materials: An In Vitro Study

Bioactive restorative materials are crucial for promoting remineralization and protecting dental tissues through ion release. This study examines how pH and temperature influence the short- and long-term ion (F-, Ca2+, Sr2+, OH-, Si, and PO43-) release from seven commercial materials: Cention Forte Filling Material, Cention Primer, Stela Self Cure, Riva Light Cure HV, Riva Self Cure, Equia Forte HT Fil, and Fuji IX GP Fast. Disks were prepared according to the manufacturers' instructions; immersed in buffer solutions at pH 4.8, 6.8, and 8.8; and stored at 37 °C and 44 °C. Ion release was measured after 1, 7, and 28 days using ion chromatography and mass spectrometry. Results revealed that ion release was significantly affected by pH, temperature, and exposure time. The highest fluoride (40.14 ± 0.32 mg/L) and calcium (74.23 ± 0.37 mg/L) releases were observed in Riva Light Cure at pH 4.8 and 44 °C after 28 days, with the highest strontium release (5.87 ± 0.06 mg/L) occurring under the same conditions. In contrast, silicon release peaked in Cention Forte Filling (31.72 ± 0.68 mg/L) at pH 4.8 and 37 °C. These findings highlight the impact of environmental factors on material performance, assisting clinicians in selecting optimal restorative materials for long-term dental health.

Promising potential effects of resveratrol on oral and dental health maintenance: a comprehensive review

Resveratrol (RV-3, 5, 4'-trihydroxystilbene) is a natural compound found in plants like red grapes, berries, and peanuts, with promising effects on dental health. It helps strengthen tooth enamel by promoting remineralization, making the teeth more resistant to decay caused by acid-producing bacteria. RV also shields dentin, a vulnerable layer beneath the enamel, from erosion and sensitivity. Its anti-inflammatory properties can reduce inflammation associated with dental conditions such as pulpitis and endodontic diseases. Moreover, RV's antimicrobial activity inhibits the growth of bacteria involved in dental plaque and biofilm formation, preventing their accumulation on the tooth surface. This contributes to a healthier oral environment and prolongs the lifespan of dental restorative materials. However, the research on RV's impact on dental health is in its early stages, and further studies are needed to confirm potential benefits. Important factors such as determining the optimal dosage, understanding its bioavailability, and assessing potential side effects require further investigation. This review focuses on the important role of RV in promoting dental health. It delves into various aspects, including its impact on root health, maintenance of the dental pulp, care for tooth enamel, effectiveness of dental restorative materials, and health of dentin.

Influence of Parotid Saliva Composition on Phosphate Species' Chemical State in Relation to Dental Caries

OBJECTIVES

The aim of the present study was to analyze the influence of parotid saliva (PS) composition on the phosphate species' chemical state in relation to dental caries.

METHODS

Unilateral stimulated PS samples were collected from 21 healthy adult subjects using a Lashley cup. Clinical caries scores of each subject were classified using the ICDAS score. The pH was recorded for each saliva sample. The concentration of specific inorganic elements (K+, Na+, Ca2+, Al3+, Sr2+, Li+, Zn2+, and Mg2+) was measured using an Inductively Coupled Plasma-Optical Emission Spectrometer (ICP-OES). The PS effective concentration of ions and the degree of saturation (DS) with respect to enamel mineral were determined by speciation calculation. The PS chemical environment was determined using 31P-Nuclear-Magnetic-Resonance-Spectroscopy (31P-NMR). Pearson's correlation test was applied to evaluate the influence of PS composition on the ICDAS score.

RESULTS

The pH varied from 5.9 to 7.6. The ICDAS scores varied from 0.03 to 2.48. PS was supersaturated with respect to HAp at all pH values. The 31P-NMR peak position value reflects the phosphate chemical state within PS and its change in relation to pH. Only calcium ion concentration [Ca2+], aluminum activity {Al3+}, and DSHAp significantly correlated with the 31P-NMR peak position value (ppm), whereas no correlation was observed between the 31P-NMR peak position value and the activities of K+, Na+, Sr2+, Mg2+, Li+, and Zn2+.

CONCLUSIONS

This parotid saliva 31P-NMR study has shown that calcium ion concentration [Ca2+], aluminum activity {Al3+}, and DSHAp significantly influence the phosphate species' chemical state existing within PS and provides extended knowledge on the main biochemical determinants of the caries process.

The antibiofilm effect and mechanism of silver nanowire-modified glass ionomer cement against multi-species oral biofilm

BACKGROUND

To investigate the antibiofilm effect and mechanism of the silver nanowire (AgNW)-modified glass ionomer cement (GIC) against multi-species oral biofilm, and to examine the mechanical and biochemical properties of this novel GIC material.

METHODS

Conventional GIC was incorporated with different concentrations of AgNW and silver nanoparticles (AgNP). Multi-species biofilms of Streptococcus mutans, Streptococcus sobrinus, Lactobacillus fermentum, and Lactobacillus rhamnosus were cultured for 72 h on GIC specimens. Scanning electron microscopy (SEM) was adopted to examine the accumulation of biofilm on GIC surfaces. A live/dead assay was performed to assess the viability of bacteria. Extracellular polysaccharides (EPS) were labelled with Alexa Fluor 647-labelled dextran conjugate and then observed by a confocal laser scanning microscope (CLSM). The D/L-Lactic Acid Assay Kit was used to evaluate the lactic acid production of the multi-species biofilms. Compressive strength, surface roughness, hardness, and wettability were measured by a universal testing machine, an atomic force microscope (AFM), a Vickers microhardness tester, and a contact angle meter, respectively. Colour stability and fluoride release of GIC specimens were assessed by VITA Easyshade® V and ion chromatography. Cell counting kit-8 (CCK-8) was used to study cytotoxicity.

RESULTS

SEM images showed that fewer biofilms were accumulated on the AgNW-GIC surfaces. The live/dead assay showed that the ratio of live bacteria was significantly lower in AgNW-GIC groups than in conventional GIC (5.8% vs. 100%, p < 0.0001). The EPS production was significantly less in AgNW-GIC groups compared to conventional GIC (p < 0.0001). There is no difference between groups regarding lactic acid production and fluoride release. The mechanical strength including compressive strength, surface roughness, hardness, and wettability were comparable between groups. The colour change between AgNW-GIC and conventional GIC was much milder than that between AgNP-GIC and conventional GIC. The results of cytotoxicity showed no significant differences in cell viability between groups.

CONCLUSIONS

This study demonstrated that AgNW-GIC had an excellent antibiofilm effect against multi-species oral biofilm, comparable mechanical and biochemical properties, and did not significantly affect the colour stability of GIC. The antibiofilm mechanism of AgNW-GIC may be related to inhibiting the viability and EPS production of bacteria.

Biomimetic remineralization of eroded dentin by synergistic effect of calcium phosphate and plant-based biomodifying agents: An in vitro study

Context

Dentin, due to its organic content, exhibits a high susceptibility to dental erosion owing to its high permeability to intrinsic acids. A crucial challenge for successful remineralization of demineralized dentin is reestablishing a complete spatial relationship between the mineral and collagen.

Aims

This study aimed to evaluate the synergistic effect of casein phosphopeptide amorphous calcium phosphate fluoride (CPP-ACPF) with plant-based dentin biomodifying agents: Grape seed extract (GSE), green tea extract (GTE), and cranberry extract (CE) on biomimetic remineralization of eroded dentin.

Settings and Design

Dentin samples were prepared and subjected to surface microhardness (SMH) analysis at baseline followed by erosive challenge with hydrochloric acid (0.01M) and pH cycling with citric acid (0.05M) and artificial saliva. The samples in all the groups except the control were subjected to surface treatments: CPP-ACPF, GSE + CPP-ACPF, GTE + CPP-ACPF, and CE + CPP-ACPF.

Subjects and Methods

Samples from all the groups were subjected to Vickers Hardness Tester for Post Treatment SMH analysis. Samples were qualitatively evaluated for changes in ultramorphological characteristics of dentin surface using scanning electron microscopy (SEM) and were quantitatively analyzed for changes in the calcium (Ca)/phosphorous (P) ratio using energy dispersive X-ray analysis (EDAX).

Statistical Analysis Used

Data obtained were statistically analyzed using ANOVA, paired samples test, and Tukey HSD test. P value < 0.05 was considered statistically significant.

Results

The samples pretreated with GSE showed the highest mean SMH followed by GTE and CE. The difference in % change was significant when GSE was compared to GTE and CE (P = 0.001 and P = 0.000, respectively). SEM pictomicrographs of demineralized dentin samples revealed enlarged and exposed dentinal tubules, and most of these tubules were unobstructed with no obvious sediments. Samples treated with test agents demonstrated amorphous crystal-like deposits occluding the dentinal tubules with higher incidence observed in the groups treated with the combination of the agents. EDAX analysis revealed the highest mean wt% of Ca and P in groups pretreated with GSE followed by GTE and CE. GSE showed the highest mean Ca/P ratio followed by CE and GTE.

Conclusions

The findings of this study demonstrated a synergistic effect when CPP-ACPF was used after pretreatment with plant-based dentin biomodifying agents in causing biomimetic remineralization of eroded dentin.

Evaluation of the effect of self-assembling peptide and fluoride varnish, alone or in combination with laser irradiation, on artificial enamel caries: a SEM/EDS and Micro-CT study

OBJECTIVE

The aim of this study was to investigate the effect of remineralization agents such as fluoride varnish and P11-4, alone and in combination with Er: YAG laser, on in-vitro hard tissue repair in artificial enamel lesions.

MATERIALS AND METHODS

A total of sixty enamel surfaces of 4 × 5 mm in size were created on both the buccal and lingual sides of thirty extracted wisdom teeth. Remineralization agents were applied to the specimens that were grouped as follows: Group 1, control; Group 2, fluoride varnish (FV); Group 3, P11-4; Group 4, laser; Group 5, laser + FV; and Group 6, laser + P11-4. The fluorescence level was determined with DiagnoDent. The enamel mineral density, area and volume, and caries lesion area and volume were determined with micro-computed tomography (µCT), surface features were evaluated using scanning electron microscopy (SEM), and elemental analysis was performed using energy dispersive x-ray spectroscopy (EDS) .

RESULTS

For specimens treated only with self-assembling peptide P11-4, the caries lesion area (mm2) values were 38.19 and 21.62, and the caries lesion volume (mm3) values were 6.27 and 2.99, respectively for pre- and post-treatment. In combination usage of self-assembling peptide P11-4 and laser, the caries lesion area (mm2) values were 38.39 and 16.91, and the caries lesion volume (mm3) values were 11.15 and 3.64, respectively for pre- and post-treatment. In the application of the P11-4 alone and in combination with laser, there was a statistically significant decrease in DiagnoDent values, an increase in enamel volume(mm3),enamel area(mm2) and mineral density(g/cm3) values and a decrease in caries lesion volume(mm3) and area(mm2) obtained by µCT, and an increase in %Ca and %F values obtained by SEM/EDS analysis (p < 0.05). It was discovered that the samples treated with P11-4 had a considerably higher rise in the Ca/P ratio than the samples treated with FV (p < 0.05). The calcium content increased significantly more when P11-4 application was combined with laser irradiation (p < 0.05).

CONCLUSIONS

The combined use of self-assembling peptide P11-4 and laser accelerated the remineralization process and increased the remineralization capacity.

CLINICAL RELEVANCE

FV and P11-4, alone or in combination with laser, can be successfully used as remineralization agents in initial enamel caries.

The Effect of Formulated Dentin Remineralizing Gel Containing Hydroxyapatite, Fluoride, and Bioactive Glass on Dentin Microhardness: An In Vitro Study

Objectives

This study aimed to develop a gel with dentin-remineralizing properties, integrating nano-hydroxyapatite (nHA), sodium fluoride (NaF), and bioactive glass (BG).

Materials and Methods

The enamel layer of 40 bovine incisors was removed. The samples were allocated into four groups of 10 each, based on varying concentrations of nHA, BG, and NaF in the gel compositions (wt%): (1) 2.5%-7.5%-0.05%, (2) 5%-5%-0.05%, (3) 7.5%-2.5%-0.05%, and (4) a control group with a base gel lacking remineralizing agents. After 8 hr of demineralization, the dentin surface microhardness was measured at depths of 30, 60, and 140 µm. After a 20-day pH cycling, the percentage of surface microhardness recovery (SMHR%) was measured and compared among the groups using the ANOVA and Tukey HSD post hoc tests (α = 0.05). Scanning electron microscopy analysis evaluated each specimen's superficial morphology.

Results

At all depths, the SMHR% of the Group 2 and Group 3 was significantly higher than the control group (p  < 0.05). The SMHR% Group 1 (67.39% ± 29.34%) was significantly higher than the control group (-21.24% ± 51.72%) only at the depth of 30 μm (p = 0.047). Group 3 had higher SMHR% than Group 2 at all depths; however, the difference was not statistically significant. Moreover, the SMHR% of Group 3 was significantly higher than that of Group 1 at depths of 30 μm (187. 94% ± 68.95% vs. 67.39% ± 29.34%; p = 0.005) and 60 μm (179.55% ± 75.96% vs. 64.34% ± 41.96%; p = 0.043). Surface deposition and tubule occlusion were observed in the Groups 2 and 3 samples, which was more prominent in the latter.

Conclusions

Combining 7.5% nHA, 2.5% BG, and 0.05% NaF could potentially remineralize primary carious lesions.

Dentine surface modification and remineralization induced by bioactive toothpastes

OBJECTIVE

In this study, dentine surface was analysed through Environmental-scanning-electron-microscopy (ESEM) with energy-dispersive-X-ray-spectrometry (EDX) and Fourier-transform-infrared-spectroscopy (FTIR) with attenuated total-reflectance (ATR) to assess the morpho-chemical changes and variations in mineralization degree after demineralizing treatment, after five toothpastes application (HA & Citrate toothpaste, Zinc-HA toothpaste, Calcium Sodium Phosphosilicate toothpaste, Arginine & Calcium carbonate toothpaste, Colgate-Triple-Action, and Control toothpaste), after soaking in artificial saliva and after citric acid attack.

METHODS

Ca/P, Ca/N and P/N ratios were calculated from EDX atomic data to evaluate the mineralization degree of dentine surface. The IR calcium phosphate (CaP)/collagen and carbonate/collagen ratios has been evaluated to assess the remineralization changes in dentine; the carbonate/collagen IR ratio was calculated to identify the nucleation of B-type-carbonated apatite and calcium carbonate.

RESULTS

ESEM-EDX and ATR-FTIR showed residuals of toothpastes after the treatments in all cases, with a general increase in the mineralization degree after soaking in artificial saliva and a decrease after acid attack. Treatment with Arginine & Calcium carbonate toothpaste showed the highest Ca/P value after treatment (Ca/P 1.62) and acid attack (Ca/P 1.5) in confirmation, IR showed the highest amount of carbonate after treatment and soaking in artificial saliva. Arginine and calcium carbonate toothpaste and HA and citrate toothpaste remained to a higher extent on the dentine surface and revealed a higher remineralization activity. These formulations showed higher resistance to demineralization attack, as demonstrated by a higher ICaP/IAmide II intensity ratio than those obtained after EDTA treatment.

CONCLUSIONS

Toothpastes that remained to a higher extent on dentine surface (arginine and calcium carbonate toothpaste in particular) were more able to promote remineralization. The formed calcium phosphate (CaPs) phase was intimately bound to dentine rather than a simple deposit.

Inorganic Phosphate Effect in a Hydrogen Peroxide-based Bleaching Agent: Physicochemical, Mechanical, and Morphological Properties of Dental Enamel

OBJECTIVES

This in vitro study aimed to assess the impact of incorporating calcium glycerophosphate (CaGP) and sodium fluoride (NaF) in addition to 35% hydrogen peroxide concerning the enamel mechanical and morphological properties.

METHODS

Specimens of bovine enamel were chosen based on their initial surface hardness (SHi) and subsequently divided into five gel groups (n=12): 1) 35% Hydrogen Peroxide (HP) Gel; 2) HP + 0.1% NaF Gel (HP/NaF); 3) HP + 0.25% CaGP Gel (HP/CaGP); 4) HP + 0.1% NaF + 0.25% CaGP Gel (HP/NaF/CaGP) and 5) HP Blue 35% Gel (HP Blue). The bleaching gels were applied thrice, for 40 min, at intervals of 7 days each. After 21 days, the final surface hardness (SHf), integrated hardness (IH), Polydispersity Index (PdI) and Zeta Potential (Zp), surface roughness (Ra, after and before), and surface/structural analysis by Scanning Electron Microscopy (SEM) were determined. The data were submitted to ANOVA (one-way and two-way) followed by the Student-Newman-Keuls test (α=0.05).

RESULTS

The addition of NaF to HP reduced demineralization by 11.5% in relation to HP (p<0.05). The NaF/CaGP association reduction is 22.8 and 20% higher in comparison to HP/NaF/CaGP and HP Blue, respectively. The IH when the PH/NaF/CaGP bleaching gel was applied, was 14% higher compared to HP and HP Blue groups.

CONCLUSIONS

It can be concluded that the association of NaF and CaGP with the 35% hydrogen peroxide gel (HP/NaF/CaGP) significantly changed tooth enamel demineralization in terms of surface, depth, roughness, and enamel morphology.

Theobromine for Remineralization of White Spot Lesions on Dental Enamel: A Systematic Review and Meta-analysis

AIM

This systematic review and meta-analysis evaluated theobromine's (Theobroma cacao) potential in remineralizing white spot lesions in dental enamel. Methods: This study is reported according to the PRISMA checklist and was registered in PROSPERO (CRD42023414371). In vitro tests that evaluated the remineralizing potential of theobromine compared to fluoride ion after demineralization for the formation of white spot lesions on enamel were selected, with no limitation on the year of publication. Electronic searches were performed in PubMed/MEDLINE, Scopus, and Web of Science by two independent researchers. Thirty articles were received of which six were selected according to the inclusion criteria.

RESULTS

The selected studies evaluated the Enamel Surface Microhardness (SMH), Vickers or Knoop, before and after treatment with theobromine and fluoride solutions. For the SMH Vickers, there were no differences between groups at baseline (p=1.00; mean difference: -0.00; CI: -11.36 to 11.36) and after treatment (p=0.51; mean difference: 4.12; CI: -8.16 to 16.41). The results of SMH Knoop showed differences between groups at baseline, favoring the experimental group (p=0.002; mean difference: 9.84; CI: 3.65 to 16.02) and after treatment favoring the control group (p=0.00001; mean difference: -5.45; CI: -7.62 to -3.27).

CONCLUSION

The use of theobromine increases the microhardness of dental enamel subjected to a demineralization process, thus being effective in the remineralization of this tissue with success equivalent to that obtained with the use of fluoride.

Evaluation of Ilex guayusa and Piper marginatum Extract Cytotoxicity on Human Dental Pulp Mesenchymal Stem Cells

BACKGROUND

Amelogenesis imperfecta is a hereditary disorder affecting dental enamel. Among its phenotypes, hypocalcified AI is characterized by mineral deficiency, leading to tissue wear and, consequently, dental sensitivity. Excessive fluoride intake (through drinking water, fluoride supplements, toothpaste, or by ingesting products such as pesticides or insecticides) can lead to a condition known as dental fluorosis, which manifests as stains and teeth discoloration affecting their structure. Our recent studies have shown that extracts from Colombian native plants, Ilex guayusa and Piper marginatum, deposit mineral ions such as phosphate and orthophosphate into the dental enamel structure; however, it is unknown whether these extracts produce toxic effects on the dental pulp.

OBJECTIVE

To assess cytotoxicity effects on human dental pulp stem cells (hDPSCs) exposed to extracts isolated from I. guayusa and P. marginatum and, hence, their safety for clinical use.

METHODS

Raman spectroscopy, fluorescence microscopy, and flow cytometry techniques were employed. For Raman spectroscopy, hDPSCs were seeded onto nanobiochips designed to provide surface-enhanced Raman spectroscopy (SERS effect), which enhances their Raman signal by several orders of magnitude. After eight days in culture, I. guayusa and P. marginatum extracts at different concentrations (10, 50, and 100 ppm) were added. Raman measurements were performed at 0, 12, and 24 h following extract application. Fluorescence microscopy was conducted using an OLIMPUS fv1000 microscope, a live-dead assay was performed using a kit employing a BD FACS Canto TM II flow cytometer, and data analysis was determined using a FlowJo program.

RESULTS

The Raman spectroscopy results showed spectra consistent with viable cells. These findings were corroborated using fluorescence microscopy and flow cytometry techniques, confirming high cellular viability.

CONCLUSIONS

The analyzed extracts exhibited low cytotoxicity, suggesting that they could be safely applied on enamel for remineralization purposes. The use of nanobiochips for SERS effect improved the cell viability assessment.

Effect of the calcium silicate and sodium phosphate remineralizing products on bleached enamel

Context and Aims

This study evaluated the effect of calcium silicate and sodium phosphate (CSSP) dentifrice and serum on the surface of enamel bleached with hydrogen peroxide (H2O2).

Materials and Methods

A total of 160 bovine enamel slabs were bleached with 35% H2O2 and treated with sodium fluoride (NaF) dentifrice-GI, CSSP dentifrice-GII; CSSP dentifrice + CSSP serum-GIII, or NaF dentifrice + NaF gel-GIV. The dentifrices were applied using a brushing machine three times daily for 7 days. After brushing, sodium phosphate gel and CSSP serum were applied. The microhardness (KNH, n = 14), surface roughness (Ra, n = 14), energy dispersive spectroscopy (n = 6), and scanning electron microscopy (n = 6) were assessed at t0 (before bleaching), t1 (after bleaching), and t2 (after postbleaching treatments).

Statistical Analysis Used

The data were subjected to a two-way analysis of variance and Bonferroni's test.

Results

The KNH decreased at t1 (P < 0.001) but recovered at t2 for all treatments, although only GII showed restored baseline values (P = 0.0109). The surface roughness increased at t1 (P < 0.001) and reduced at t2 (P < 0.001) for all groups, with no significant differences among groups. Enamel composition and morphology did not differ after the treatments, except for silicon accumulation in GIII.

Conclusions

Postbleaching treatment with CSSP dentifrice and serum yielded superior remineralizing effects on bleached enamel.

The demineralization resistance and mechanical assessments of different bioactive restorative materials for primary and permanent teeth: an in vitro study

OBJECTIVES

This article examines the efficacy of two bioactive dental composites in preventing demineralization while preserving their mechanical and physical properties.

MATERIALS AND METHODS

The study compares Beautifil Kids and Predicta® Bioactive Bulk-Fill (Predicta) composites with conventional dental composite. Flexural strength and elastic modulus were evaluated using a universal testing machine. A pH-cycling model assessed the composites' ability to prevent dentin demineralization. Color stability and surface roughness were measured using a spectrophotometer and non-contact profilometer, respectively, before and after pH-cycling, brushing simulation, and thermocycling aging.

RESULTS

Beautifil Kids exhibited the highest flexural strength and elastic modulus among the materials (p < 0.05). Predicta demonstrated the highest increase in dentin surface microhardness following the pH-cycling model (p < 0.05). All groups showed clinically significant color changes after pH-cycling, with no significant differences between them (p > 0.05). Predicta exhibited greater color change after brushing and increased surface roughness after thermocycling aging (p < 0.05). While Beautifil Kids had higher surface roughness after pH-cycling (p < 0.05).

DISCUSSION/CONCLUSION

Bioactive restorative materials with ion-releasing properties demonstrate excellent resistance to demineralization while maintaining mechanical and physical properties comparable to the control group.

Fluoride, pH Value, and Titratable Acidity of Commercially Available Mouthwashes

AIM

The primary objective of this work was to assess total soluble fluoride (TSF), pH values, and titratable acidity (TA) of various mouthwashes "in vitro," and the second was to compare fluoride content on labels with measured TSF.

METHODS

Commercial mouthwashes were collected and analysed. Company, type, manufacturer data, and active ingredients (essential oils [EO], cetylpyridinium chloride [CPC], chlorhexidine [CHX], and fluoride) were described. TSF, pH, and TA capacity were measured. Descriptive quantitative analysis were performed per mouthwash.

RESULTS

In total, 54 mouthwashes from 20 brands were included. These included mouthwashes with the active ingredients EO (n = 11), CPC (n = 17), CHX (n = 18), and fluoride (n = 32); 27 mouthwashes with more than 1 of these active ingredients; and 4 with none of the above-mentioned ingredients. Fluoride was present in different formulations; most contained sodium fluoride (NaF), and a few had sodium monofluorophosphate and amine fluoride + NaF. The pH values of all evaluated mouthwashes ranged from 4.1 to 7.9. Twenty mouthwashes presented pHs below 5.5, of which 10 contained fluoride. TA ranged from 0 to 48. According to the manufacturer data, mouthwashes with fluoride had concentrations from 217 to 450 ppm, with 90% in the range from 217 to 254 ppm. Laboratory data revealed that TSF ranged from 229 to 500 ppm, with 90% in the range from 229 to 337 ppm. A statistically significant difference was observed between measured TSF and the labelled fluoride content on the packaging of the fluoride mouthwashes (mean difference, 43.92 ± 34.34; P < .001). Most of these mouthwashes contained at least the amount of fluoride as mentioned on the packaging (93%).

CONCLUSION

The pH values and TA of commercially available mouthwashes showed a large variation. TSF levels of the fluoride mouthwashes were found to be at least the amount of fluoride as labelled. Dental care professionals should be aware of the pH, TA, fluoride content, and other active ingredients of different mouthwashes to better understand their potential impact on oral health.

The effect of combined use of resin infiltration with different bioactive calcium phosphate-based approaches on enamel white spot lesions: An in vitro study

OBJECTIVES

This in vitro study aimed to evaluate the effect of resin infiltration combined with casein phosphopeptide-amorphous calcium phosphate with fluoride (CPP-ACPF) or bioactive glass (BAG) on the stability of enamel white spot lesions (WSLs) treatment.

MATERIALS AND METHODS

Eighty-four enamel blocks were prepared from the buccal surfaces of sound human premolars. All enamel blocks were placed in a demineralisation solution for 3 days to establish the artificial enamel WSLs. Enamel blocks with WSLs were randomly divided into three groups (n = 28 each group): RI/B: one-off resin infiltration followed by twice daily BAG treatment; RI/C: one-off resin infiltration followed by twice daily CPP-ACPF treatment; RI: one-off resin infiltration treatment only (as control) and subjected to pH cycling for 7 days. Surface morphology, elemental analysis, crystal characteristics, surface roughness and microhardness of enamel surfaces were investigated by scanning electron microscopy and energy-dispersive spectrometry observation, X-ray diffraction (XRD), atomic force microscope and Vickers' hardness testing, respectively.

RESULTS

Mean values of the surface roughness (mean±standard deviation (nm)) were 24.52±5.07, 27.39±5.87 and 34.36±4.55 for groups RI/B, RI/C and RI respectively (p = 0.003). The calcium to phosphate ratios were 1.32±0.16, 1.22±0.26 and 0.69±0.24 for groups RI/B, RI/C and RI respectively (p < 0.001). XRD revealed apatite formation in all three groups. The mean enamel surface microhardness (kg/mm2) of the groups were 353.93±28.49, 339.00±27.32 and 330.38±22.55 for groups RI/B, RI/C and RI respectively (p = 0.216).

CONCLUSIONS

Resin infiltration combined with CPP-ACPF or BAG remineralisation appears to improve the surface properties of WSLs.

CLINICAL SIGNIFICANCE

The combination of resin infiltration and CPP-ACPF/BAG remineralisation may be a potential treatment for the management of the WSLs.

Does surface enamel composition and characteristics vary with inter proximal enamel reduction?

OBJECTIVE

This study aimed to evaluate the chemical composition of the proximal enamel surface and the surface characteristics subjected to different extents of interproximal reduction (IPR) in a clinical setting.

MATERIALS AND METHODS

Premolars of orthodontic patients which were designated for extraction were subjected to .2 mm, .3 mm, and .5 mm of IPR. After 1 month, the teeth were extracted and the teeth were subjected to scanning electron microscope (SEM) and energy-dispersive x-ray spectroscopy (EDX).

RESULTS

The SEM images of the three experimental groups (taken at magnification of 500 × and 2000 ×) showed that the enamel surfaces were irregular and rough compared to the honey comb appearance of the unstripped group. Small areas of erosion of enamel surface were seen in Group I (0.2 mm) under 2000 × magnification compared to Group IV (control) which showed typical arrangement of enamel rods in alternating orientation. The enamel surfaces of stripped and unstripped enamel contained calcium, phosphorus, carbon, oxygen, and nitrogen. The differences were not statistically significant and neither were the calcium phosphorous stoichiometric ratios between the four groups.

CONCLUSIONS

On analyzing the surface characteristics of enamel using SEM between the stripped and unstripped surfaces, there were irregularities and roughness seen in stripped surface whereas honey comb pattern was observed in unstripped enamel surfaces. The elements found in unstripped and stripped enamel surfaces were calcium, phosphorous, carbon, oxygen, and nitrogen. Although the calcium and phosphorus were high in the 0.5 mm IPR group, the difference between stripped and unstripped enamel surfaces was statistically not significant.

CLINICAL RELEVANCE

There have been concerns that IPR can remove the superficial mineral-rich layer making the deeper layers more susceptible to carious attack. No study has evaluated the mineral content in different layers of enamel in response to IPR in vivo and this study found no significant difference between pristine enamel and enamel subjected to IPR. The results of this study strengthen the validity of the clinical protocol employed.

Multidisciplinary evaluation of the remineralization potential of three fluoride-based toothpastes on natural white spot lesions

OBJECTIVES

This in vitro study aimed assessing the remineralization potential of three commercial fluoride-based toothpastes in permanent teeth with natural white spot lesions (WSLs). A multidisciplinary approach based on Raman microspectroscopy (RMS), Scanning electron microscopy (SEM), Energy-dispersive x-ray spectroscopy (EDS), and Vickers microhardness (VMH) was exploited.

METHODS

N = 12 human molars with natural WSLs in the proximal-vestibular zone were selected and divided into 4 groups (n = 3) according to the different treatments: HAF (hydroxyapatite with fluoride ions); SMF (sodium monofluorophosphate with arginine); SF (sodium fluoride with enzymes), and CTRL (untreated group). All toothpastes tested contained 1450 ppm of fluoride. Teeth samples were submitted to the following protocol: a 7-day pH cycling treatment, with two daily exposures (2 min each time) to the commercial toothpastes described above. The surface micromorphology (SEM), the chemical/elemental composition (RMS and EDS), and the Vickers microhardness (VMH) were evaluated. Statistical analysis was performed.

RESULTS

A remarkable remineralization of WSLs in SEM images was observed in all treated groups compared to CTRL. In particular, HAF and SF displayed higher values of VMH, phosphates amount (I960), crystallinity (FWHM960), and lower ones of C/P (I1070/I960) with respect to CTRL. Intermediate values were found in SMF, higher than CTRL but lower with respect to HAF and SF. As regards the Ca/P ratio, statistically significant differences (p < 0.05) were found between SF and the other groups.

CONCLUSIONS

All the tested dentifrices have shown to remineralize the WSLs. SF and HAF have comparable capability in hardness recovery and crystallinity; however, SF shows the best remineralizing potential according to both micromorphological and chemical analyses. Clinical relevance The daily use of toothpastes containing hydroxyapatite partially replaced with fluoride, sodium monofluorophosphate with arginine and sodium fluoride toothpaste associated with enzymes represents a preventive, therapeutic, effective, and non-invasive tool for remineralize WSLs.

Inorganic Compounds as Remineralizing Fillers in Dental Restorative Materials: Narrative Review

Secondary caries is one of the leading causes of resin-based dental restoration failure. It is initiated at the interface of an existing restoration and the restored tooth surface. It is mainly caused by an imbalance between two processes of mineral loss (demineralization) and mineral gain (remineralization). A plethora of evidence has explored incorporating several bioactive compounds into resin-based materials to prevent bacterial biofilm attachment and the onset of the disease. In this review, the most recent advances in the design of remineralizing compounds and their functionalization to different resin-based materials' formulations were overviewed. Inorganic compounds, such as nano-sized amorphous calcium phosphate (NACP), calcium fluoride (CaF₂), bioactive glass (BAG), hydroxyapatite (HA), fluorapatite (FA), and boron nitride (BN), displayed promising results concerning remineralization, and direct and indirect impact on biofilm growth. The effects of these compounds varied based on these compounds' structure, the incorporated amount or percentage, and the intended clinical application. The remineralizing effects were presented as direct effects, such as an increase in the mineral content of the dental tissue, or indirect effects, such as an increase in the pH around the material. In some of the reported investigations, inorganic remineralizing compounds were combined with other bioactive agents, such as quaternary ammonium compounds (QACs), to maximize the remineralization outcomes and the antibacterial action against the cariogenic biofilms. The reviewed literature was mainly based on laboratory studies, highlighting the need to shift more toward testing the performance of these remineralizing compounds in clinical settings.

Integrated Multiplex Sensing Clear Aligner for In Situ Monitoring of Dental Enamel Demineralization

Clear aligners have become one of the most important tools in orthodontic treatment. However, over a lengthy period of orthodontic treatment, enamel demineralization or even dental caries could be susceptible for occurrence. Therefore, early diagnosis of enamel demineralization has been widely investigated. Nevertheless, for reasons including bulky monitoring equipment and complexity of operation, few techniques reported to date possessed clinical utility. The combination of flexible electronics and electrochemical sensing technology presented a promising strategy. Herein, an integrated multiplex sensing clear aligner (IMSCA) system, including a clear aligner with a multiplex sensor array patch, was developed for in situ monitoring of Ca²⁺, pH, and PO₄^3- in the oral environment to provide a foundation for early diagnosis of enamel demineralization. The IMSCA exhibited a broad linear response range, great selectivity, temporal stability, reproducibility, and biological safety. Results of enamel demineralization simulating experiments and human permanent tooth demineralization experiments validate the capability of the IMSCA to indicate the occurrence of enamel demineralization. All results ultimately point to the promising clinical utility of the IMSCA, which facilitates the quantitative characterization of enamel demineralization in complex oral environments. This study provides a novel strategy in the early diagnosis of enamel demineralization.

The Effect of a Bioactive Oral System and CO2 Laser on Enamel Susceptibility to Acid Challenge

This study evaluated the structural changes of enamel treated by the Regenerate system and carbon dioxide (CO2) laser against acid challenge. Thirty human enamel slabs were prepared and assigned into three groups: Group I: untreated (control); Group II: treated with the Regenerate system; and Group III exposed to CO2 laser. All specimens were subjected to an acid challenge (pH 4.5–7.0) for 14 days. Specimens were evaluated and compared at 120 points using five Raman microspectroscopic peaks; the phosphate vibrations ν1, ν2, ν3, and ν4 at 960, 433, 1029, and 579 cm−1, respectively, and the carbonate at 1070 cm−1, followed by Vickers microhardness test. The ratio of carbonate to phosphate was correlated to the equivalent microhardness numbers. The intensities of phosphate peaks ν1, ν2, and ν4 were reduced in all groups post-acid challenge, while the carbonate and ν3 were significantly increased (p < 0.000). Surfaces treated by Regenerate exhibited higher peak intensity of phosphate and carbonate before and after pH-cycling (p < 0.05). The mineral content in enamel had a direct effect on tissue microhardness, and the CO2-lased surfaces showed a reduced carbonate content and higher microhardness values. Both approaches induced surface changes that can protect enamel against acid challenge resulting in a significant benefit for dental healthcare.

Fluoride concentration in dentifrices marketed In Argentina

OBJECTIVES

The objective of this study was to determine the different forms of fluoride available in dentifrices commercialized in Argentina.

METHODS

Thirty three different brands of fluoridated dentifrices were purchased in different cities of Argentina. The total fluoride (TF), total soluble fluoride (TSF) and ionic fluoride (IF) of two samples of each brand were analysed (μg F/ml) by ion-specific fluorine electrodes.

RESULTS

A total of 67% of dentifrices showed fluoride content that compromises anti-caries activity. A total of 54.5% was formulated with sodium fluoride (NaF), 36.3% formulated with sodium monofluorophosphate (MFP), 3% NaF associated with MFP and 9% formulated with stannous fluoride (SnF2). The TF found was less than the amount declared by the manufacturer in all the brands analysed. The concentration of TF found in the fluoride dentifrices ranged from 590.3 to 1381.4 μg/ml F, TSF ranged from 343.1 to 1258.3 μg/ml F, and IF ranged from 13.1 to 913 μg/ml F.

CONCLUSION

The concentrations of TF were below the reported values. TSF and IF were lower than the total fluoride concentration. Most of the samples studied have TSF concentration that compromises anti-caries effect. Additional studies with a larger number of samples are suggested to obtain more data.

Bioactivity of Dental Restorative Materials: FDI Policy Statement

The term bioactivity is being increasingly used in medicine and dentistry. Due to its positive connotation, it is frequently utilised for advertising dental restorative materials. However, there is confusion about what the term means, and concerns have been raised about its potential overuse. Therefore, FDI decided to publish a Policy Statement about the bioactivity of dental restorative materials to clarify the term and provide some caveats for its use in advertising. Background information for this Policy Statement was taken from the current literature, mainly from the PubMed database and the internet. Bioactive restorative materials should have beneficial/desired effects. These effects should be local, intended, and nontoxic and should not interfere with a material's principal purpose, namely dental tissue replacement. Three mechanisms for the bioactivity of such materials have been identified: purely biological, mixed biological/chemical, or strictly chemical. Therefore, when the term bioactivity is used in an advertisement or in a description of a dental restorative material, scientific evidence (in vitro or in situ, and preferably in clinical studies) should be provided describing the mechanism of action, the duration of the effect (especially for materials releasing antibacterial substances), and the lack of significant adverse biological side effects (including the development and spread of antimicrobial resistance). Finally, it should be documented that the prime purpose, for instance, to be used to rebuild the form and function of lost tooth substance or lost teeth, is not impaired, as demonstrated by data from in vitro and clinical studies. The use of the term bioactive dental restorative material in material advertisement/information should be restricted to materials that fulfil all the requirements as described in the FDI Policy Statement.

Effects of the application timing of anti-erosive agents on dentin erosion

This in vitro study aimed to evaluate the effects of the application timing of anti-erosive agents on dentin erosion. Eighty dentin specimens with dimensions of 2 × 2 × 2 mm were prepared and randomly divided into 4 groups based on the treatment solutions: 1.23 × 104 μg/ml sodium fluoride (NaF), 120 μg/ml chlorhexidine (CHX), 300 μg/ml quercetin (QUE), and deionized water (DW, negative control). The specimens in each group were further divided into 2 subgroups according to the application timing of the treatment solutions (n = 10): before the erosive challenges (PRE) and after the erosive challenges (POST). All specimens were submitted to 4 daily erosive challenges for 5 d. For each erosive challenge, the specimens in the subgroup PRE were treated with the respective solutions for 2 min and then immersed in cola drinks for 5 min, while the specimens in the subgroup POST were immersed in cola drinks for 5 min followed by treatment with the respective solutions for 2 min. The erosive dentin loss (EDL) was measured using a contact profilometer, and the surface morphology of the dentin specimens was evaluated by scanning electron microscopy at the end of the experiment. The data were statistically analyzed using two-way analysis of variance (ANOVA) and Bonferroni's test (α = 0.05). Significantly less EDL was observed in the groups NaF, CHX, and QUE than in the group DW (all P < 0.001). Significantly lower EDL was observed in the groups CHX and QUE than in the group NaF (P = 0.001 and P < 0.001, respectively). For CHX, subgroup POST exhibited significantly less EDL than subgroup PRE (P < 0.001). Regarding QUE, subgroup PRE showed significantly less EDL than subgroup POST (P < 0.001). Furthermore, a relatively greater number of obliterated dentinal tubules was visible in the subgroup POST rather than in the subgroup PRE of the group CHX, while in the group QUE, narrower dentinal tubules were observed in the subgroup PRE than those in subgroup POST. In conclusion, CHX and QUE showed the best performance in controlling dentin erosion. CHX was more effective in reducing EDL when applied after erosive challenges, whereas QUE worked more effectively when used before erosive attacks. The application timing should be considered when evaluating the effects of anti-erosive agents because it may determine their effectiveness.

Assessment of the Remineralizing Efficacy of Grape Seed Extract vs Sodium Fluoride on Surface and Subsurface Enamel Lesions: An In Vitro Study

AIM

The aim of this study was to evaluate the efficacy of grape seed extract (GSE) on remineralization of surface and subsurface enamel lesions compared to that of sodium fluoride (NaF).

MATERIALS AND METHODS

A total of 20 intact bovine incisor crowns were separated from their roots and immersed in a demineralizing solution for 96 hours at 37°C to create artificial enamel lesions. The specimens were randomly divided into two groups (n = 10): 6.5% GSE solution and 1000 ppm NaF solution. The specimens were subjected to six daily pH cycles for 8 days. The microhardness test was carried out at three different stages: baseline, after artificial caries formation, and after pH cycling. Raman spectroscopy was used to evaluate the depth of enamel remineralization. Surface morphology and elemental analysis were assessed using a scanning electron microscope (SEM) and an energy dispersive X-ray (EDX) spectroscope, respectively. Statistical analysis was performed using SPSS 22.0 at a significance level of p ≤ 0.05.

RESULTS

There was a significant increase in the mean values of enamel surface microhardness after pH cycles in the two groups compared to after artificial caries formation, but there was no significant difference between both groups. The B-type carbonate/phosphate (Ca/P) ratio at 10 and 40 µm depth revealed no significant difference between the two groups. Scanning electron microscope micrograph revealed occlusion of porosities and particle precipitation on the enamel surface of the two groups, while EDX results for the Ca/P ratio of the GSE and NaF groups were 1.59 and 1.60, respectively.

CONCLUSION

Grape seed extract and NaF are equally effective in remineralizing surface and subsurface artificial enamel lesions.

CLINICAL SIGNIFICANCE

Grape seed extract can be considered a promising herbal material and a safe alternative to traditional NaF for the noninvasive treatment of enamel lesions.

Effectiveness-of Calcium Phosphate derivative agents on the prevention and remineralization of caries among children- A systematic review & meta-analysis of randomized controlled trials

OBJECTIVES

Dental caries among children is a highly prevalent yet easily preventable oral health issue among children. Various calcium phosphate (CaP) derivatives are implicated to exhibit caries preventive potential; however, no study has summarized the anti-caries effectiveness of these agents. This systematic review and meta-analysis sought to assess the caries-preventive and tooth-remineralizing effect of various (CaP) derivative agents compared to no-intervention/placebo or Fluoride (F) use alone among children.

MATERIALS AND METHODS

EMBASE, Ovid, PubMed, Scopus, Web of Science, Cochrane central register of controlled trials (CENTRAL), and grey literature were searched for relevant articles up to April 2021. Only English-language articles were included. Total 2636 articles were searched through different databases; out of the 2161 articles were screened after duplicate removal. 26 studies fulfilling the eligibility criteria were included in this systematic review. Methodological quality assessment and quantitative analysis were done using RevMan. GRADE was used to evaluate the certainty of evidence.

RESULTS

A total of 26 trials fulfilling the eligibility criteria were included. The meta-analysis of 10 studies revealed that complete white spot lesions (WSLs) regression (RR=1.56; 95% CI, 1.27 to 1.91; P < .0001, I2=0%), post intervention active WSLs (RR=0.80; 95% CI, 0.70 to 0.90; P = .0004, I2=0%) and post intervention Salivary S. mutans count (RR= 0.69; 95% CI, 0.48 to 0.99; P = .47, I2=0%) significantly favored the CaP+F combined therapy as compared to F alone. No significant differences in the lesion area, Delta F, and DIAGNOdent values were observed between the 2 groups. Low certainty of the evidence was found in the present systematic review due to the high/unclear risk of bias, imprecision, and indirectness of included trials.

CONCLUSIONS

Topical treatment using CaP+F group showed superior remineralization potential as well as the antibacterial effect on dental caries among children as compared to no intervention and/or placebo or F alone. Apart from CPP-ACP, other CaP derivatives like TCP and fTCP seem to have promising effects in remineralizing early lesions, however, very few trials exist on these potential agents. To provide definitive recommendations in this area, more clinical trials on caries preventive effectiveness of various CaP agents are warranted.

Rubbing-Assisted Approach for Fabricating Oriented Nanobiomaterials

The highly-oriented structures in biological tissues play an important role in determining the functions of the tissues. In order to artificially fabricate oriented nanostructures similar to biological tissues, it is necessary to understand the oriented mechanism and invent the techniques for controlling the oriented structure of nanobiomaterials. In this review, the oriented structures in biological tissues were reviewed and the techniques for producing highly-oriented nanobiomaterials by imitating the oriented organic/inorganic nanocomposite mechanism of the biological tissues were summarized. In particular, we introduce a fabrication technology for the highly-oriented structure of nanobiomaterials on the surface of a rubbed polyimide film that has physicochemical anisotropy in order to further form the highly-oriented organic/inorganic nanocomposite structures based on interface interaction. This is an effective technology to fabricate one-directional nanobiomaterials by a biomimetic process, indicating the potential for wide application in the biomedical field.

Comparative Evaluation of Salivary Fluoride Concentration after Topical Application of Silver Diamine Fluoride and Sodium Fluoride: A Randomized Controlled Trial

Background

The topical fluoride acts on the tooth in many ways and their most important action is inhibition of demineralization and enhancement of enamel remineralization.

Aim

The purpose of this clinical trial was to assess the fluoride concentration in saliva before and after 38% silver diamine fluoride (SDF) and 5% sodium fluoride (NaF) application on enamel and duration of its availability at different time intervals.

Methodology

A randomized clinical trial was conducted among 40 healthy children aged between 6 and 12 years. The participants were then randomly allocated into two different groups in which the first group (group I) was given 30% SDF and the second group (group II) were topically applied with 5% NaF solution. The fluoride concentration was measured in the salivary samples, which were collected at three time intervals, that is, at baseline (S1), 2 hours (S2), and 24 hours (S3) after application. Analysis of variance (ANOVA) test was used for evaluation and independent paired t-test was conducted for comparison between groups.

Results

When using an ANOVA with repeated measures with a Greenhouse–Geisser correction, the mean scores of fluoride concentration were statistically significantly different at different time intervals for both NaF (F = 20.854, p < 0.0005) and SDF (F = 22.746, p < 0.0005).

Conclusion

The present trial concluded that topical fluoride application increases fluoride bioavailability in saliva thereby increasing tooth remineralization. A steep rise in fluoride concentration was observed shortly post-SDF application at 2 hours and 24 hours time interval emerging a need for further research into the field of fluoridation with SDF.

How to cite this article

Jabin Z, Nasim I, Priya V V, et al. Comparative Evaluation of Salivary Fluoride Concentration after Topical Application of Silver Diamine Fluoride and Sodium Fluoride: A Randomized Controlled Trial. Int J Clin Pediatr Dent 2022;15(3):371-375.

Effect of adhesive coating on calcium, phosphate, and fluoride release from experimental and commercial remineralizing dental restorative materials

This study investigated the potential of adhesive coating for hindering the reactivity of ion-releasing dental restorative materials. Experimental composites were prepared by replacing 10 or 20 wt% of reinforcing fillers with two types of bioactive glass. A glass ionomer, a giomer, and an alkasite were used as representatives of commercial ion-releasing materials. Restorative material specimens were coated with an etch-and-rinse adhesive, 1-step self-etch adhesive, 2-step self-etch adhesive, or left uncoated. The specimens were immersed in a lactic acid solution and ion concentrations were measured in 4 days intervals for 32 days (atomic absorption spectrometry for calcium, UV–Vis spectrometry for phosphate, ion-selective electrode for fluoride, and pH-meter for pH values). The adhesive coating reduced ion release between 0.3 and 307 times, in a significantly material- and adhesive-dependent manner. Fluoride release was most highly impaired, with the reduction of up to 307 times, followed by phosphate and calcium release, which were reduced up to 90 and 45 times, respectively. The effect of different adhesive systems was most pronounced for phosphate release, with the following rankings: uncoated ≥ 2-step self-etch adhesive ≥ 1-step self-etch adhesive ≥ etch-and-rinse adhesive. The differences among adhesives were less pronounced for calcium and fluoride. It was concluded that the resinous adhesive layer can act as a barrier for ion release and diminish the beneficial effects of remineralizing restorative materials.

Evaluation of the changes in physical properties and mineral content of enamel exposed to radiation after treating with remineralization agent

OBJECTIVE

The aim of this study was to investigate the effect of different remineralization agents on the physical properties and elemental content of enamel exposed to radiation.

MATERIAL AND METHOD

The enamel surfaces of impacted third molar teeth were prepared, and six study groups were created (n = 6). Next, 60 Gy radiation was applied to each group. Between applications, each group except for the control group was treated with a different remineralization agent (sodium fluoride, casein phosphopeptide-amorphous calcium phosphate (CPP-ACP), casein phosphopeptide amorphous calcium phosphate with fluorite (CPP-ACFP), bioactive glass, or chitosan). The results were evaluated in terms of pre- and post-radiation values and the difference between the two. The paired-samples t test and analysis of variance test were used in the analysis of normally distributed hardness and roughness values, while Wilcoxon's signed ranks test, and the Kruskal Wallis and Mann-Whitney U tests were used in the analysis of elemental content without normal distribution.

RESULTS

A statistically significant decrease was observed in microhardness measurements in all groups. Intragroup evaluation revealed a statistically significant difference between the NaF and bioactive glass groups (p < 0.05). No significant difference was observed between the groups' roughness measurements (p < 0.05). Intergroup evaluation of surface roughness revealed a significant difference in the CPP-ACFP and chitosan groups (p < 0.05). Pre- and post-radiation oxygen, magnesium, and potassium levels and Ca/P ratios also differed significantly (p < 0.05).

CONCLUSION

Radiation caused a statistically significant difference in the microhardness and elemental content of enamel. However, no significant difference was observed in enamel roughness. The applied remineralizing agents have a partial ameliorating effect on the adverse impacts of radiation.

CLINICAL RELEVANCE

Radiation causes changes in the mechanical properties and elemental content of tooth enamel. Remineralizing agent application is a promising option in reducing the adverse effects of irradiation.

Synchrotron radiation analysis of root dentin: the roles of fluoride and calcium ions in hydroxyapatite remineralization

Although the use of fluoride for root caries control is reported to be effective, the mechanism of maintaining hydroxyapatite is still unclear. This study elucidates the roles of fluoride in the recrystallization of hydroxyapatite, and the impact of calcium to maintain the abundance of hydroxyapatite on acid-challenged root dentin with a novel approach - using synchrotron radiation. Root dentin samples obtained from 40 extracted human premolars were subjected to pH challenge in combination with fluoride treatment. The effect of fluoride on hydroxyapatite regeneration on the root was investigated by using a range of fluoride concentrations (1000-5000 p.p.m.) and the EDTA-chelation technique in vitro. Synchrotron radiation X-ray micro-computed tomography and X-ray absorption spectroscopy were utilized to characterize the chemical composition of calcium species on the surface of prepared samples. The percentage of hydroxyapatite and the relative abundance of calcium species were subsequently compared between groups. The absence of calcium or fluoride prevented the complete remineralization of hydroxyapatite on the surface of early root caries. Different concentrations of fluoride exposure did not affect the relative abundance of hydroxyapatite. Sufficient potency of 1000 p.p.m. fluoride solution in promoting hydroxyapatite structural recrystallization on the root was demonstrated. Both calcium and fluoride ions are prerequisites in a caries-prone environment. Orchestration of F- and Ca2+ is required for structural homeostasis of root dentin during acid attack. Sustainable levels of F- and Ca2+ might thus be a strict requirement in the saliva of the population prone to root caries. Fluoride and calcium contribute to structural homeostasis of tooth root, highlighting that routine fluoride use in combination with calcium replenishment is recommended for maintaining dental health. This study also demonstrates that utilization of synchrotron radiation could provide a promising experimental platform for laboratory investigation especially in the dental material research field.

Effect of casein phosphopeptide amorphous calcium fluoride phosphate and calcium glycerophosphate on incisors with molar-incisor hypomineralization: A cross-over, randomized clinical trial

BACKGROUND: Within the scope of minimally invasive dentistry, the use of different biocompatible remineralization agents on incisors affected by molar-incisor hypomineralization (MIH) gains importance. OBJECTIVE: To evaluate the effect of casein phosphopeptide amorphous calcium fluoride phosphate (CPP-ACFP) and calcium glycerophosphate (CaGP) in mineral density (MD) of white/creamy and yellow/brown demarcated opacities on incisors affected by MIH by means laser fluorescence (LF). METHODS: As a cross-over, randomized trial, twenty-two children with 167 incisors affected by MIH were recruited and randomly assigned to one of the two different agents and crossed over to other agents with two weeks washout in between. Incisors were examined by using LF at all before and after three months periods. RESULTS: The results of the paired t-tests for determining the period effect between the baseline findings showed significant difference in white/creamy and yellow/brown demarcated opacities of LF values for both groups (p < 0.05). The difference between both groups according to after categorization of 20% increasing in MD in the percent of change before and after application on LF values; was not found statistically significant in white/creamy (p = 0.970) and yellow/brown (p = 0.948) opacities. CONCLUSIONS: The primary outcome was CPP-ACFP and CaGP had a positive effect in decreasing hypomineralization on MIH-affected enamel for three months period.

Effectiveness of Self-Assembling Peptide (P11-4) in Dental Hard Tissue Conditions: A Comprehensive Review

The limitations on the use of fluoride therapy in dental caries prevention has necessitated the development of newer preventive agents. This review focusses on the recent and significant studies on P11-4 peptide with an emphasis on different applications in dental hard tissue conditions. The self-assembling peptide P11-4 diffuses into the subsurface lesion assembles into aggregates throughout the lesion, supporting the nucleation of de novo hydroxyapatite nanocrystals, resulting in increased mineral density. P11-4 treated teeth shows more remarkable changes in the lesion area between the first and second weeks. The biomimetic remineralisation facilitated in conjunction with fluoride application is an effective and non-invasive treatment for early carious lesions. Despite, some studies have reported that the P11-4 group had the least amount of remineralised enamel microhardness and a significantly lower mean calcium/phosphate weight percentage ratio than the others. In addition, when compared to a low-viscosity resin, self-assembling peptides could neither inhibit nor mask the lesions significantly. Moreover, when it is combined with other agents, better results can be achieved, allowing more effective biomimetic remineralisation. Other applications discussed include treatment of dental erosion, tooth whitening and dentinal caries. However, the evidence on its true clinical potential in varied dental diseases still remains under-explored, which calls for future cohort studies on its in vivo efficacy.

Titanium-Containing Silicate-Based Sol-Gel Bioactive Glass: Development, Characterization, and Applications

Bioactive glasses are surface-reactive glasses that, when placed in physiological fluid, undergo a transformation from glass to hydroxyapatite. Doping the bioactive glass with metallic ions can impart desirable and unique properties that are not inherent to natural hydroxyapatite. Once such ion is titanium. Titanium exists in trace amounts in native dental enamel, and its presence has been correlated with increased tooth hardness and brightness, both desirable clinical properties. Synthetic titanium-substituted hydroxyapatite exhibits better mechanical and antibacterial properties and demonstrates potential for an improved cellular response when compared to unmodified hydroxyapatite with applications in the broader field of bone tissue engineering. In this work, we use the sol-gel method to synthesize a titanium-containing silicate-based bioactive glass aimed at generating titanium-substituted hydroxyapatite on the glass surface upon immersion in body fluid. Titanium is homogeneously distributed throughout our glass, which keeps its amorphous nature. After 14 days of immersion in simulated body fluid, the glass forms a titanium-substituted hydroxyapatite on its surface. Enamel surfaces treated with the titanium-containing glass show significantly increased microhardness compared to enamel surfaces treated with a control glass, confirming the potential for the proposed glass in enamel remineralization. We also show that the presence of titanium in the glass promotes cell differentiation toward bone formation, suggesting further applications for this material in the broader field of bone tissue engineering.

Building an isoscape based on tooth enamel for human provenance estimation in Brazil

In this study, we present a correlation between δ¹⁸O_C values of carbonate in tooth enamel samples from the modern Brazilian population and the available δ¹⁸O_DW data for the meteoric water from the Global Network of Isotopes in Precipitation (GNIP). Tooth enamel from 119 Brazilian individuals from five different regions of the country were analyzed. The δ¹⁸O_C isoscape obtained is in good agreement with the isoscape based on regional meteoric and drinking water. The regression matrix obtained for the δ¹⁸O values of the carbonate tooth enamel and meteoric water was used to build an isoscape using the regression-kriging approach. Our data show that Brazil can be divided in two main regions with respect to the δ¹⁸O values of the carbonate tooth enamel: (1) the most easterly part of the northeast region, which is characterized by a warm and dry climate and (2) the remainder of the country, stretching from the Amazon rain forest to the more southernly regions. The data herein reported can be used for forensic purposes related to human identification.

In vitro mineral apposition analysis of two Colombian plant extracts on Amelogenesis imperfecta teeth

OBJECTIVE

To determine if native Colombian Piper marginatum Jacq. and Ilex guayusa Loes plant extracts have a remineralizing effect on teeth with Amelogenesis imperfecta in comparison with the commercial products Clinpro-3M and Recaldent™.

MATERIAL AND METHODS

An in vitro study was carried out with 128 human teeth slices (64 healthy and 64 with Amelogenesis imperfecta) on which an initial Raman spectroscopy was performed followed by Raman spectroscopies at 0, 24, 48, and 72 h to determine possible remineralization by observing mineral increase or decrease as a result of P. marginatum Jacq. and I. guayusa Loes extract application in comparison to control substance (Clinpro and Recaldent™) application. Obtained data were analyzed using a bivariate method with a t unidirectional test. Significant differences among groups were determined by an ANOVA with Dunnett post hoc tests.

RESULTS

Native I. guayusa Loes and P. marginatum Jacq. Colombian plants extracts exhibited phosphate and orthophosphate mineral apposition, where P. marginatum Jacq. presented better results.

CONCLUSIONS

Native Colombian I. guayusa Loes and P. marginatum Jacq plant extract might in the future be useful for dental tissue remineralization, as they induced phosphate and orthophosphate mineral apposition, main components of tooth enamel. These types of natural compounds can become an alternative to fluorine, whose ingestion is harmful to the human body.

Bioactive Calcium Phosphate-Based Composites for Bone Regeneration

Calcium phosphates (CaPs) are widely accepted biomaterials able to promote the regeneration of bone tissue. However, the regeneration of critical-sized bone defects has been considered challenging, and the development of bioceramics exhibiting enhanced bioactivity, bioresorbability and mechanical performance is highly demanded. In this respect, the tuning of their chemical composition, crystal size and morphology have been the matter of intense research in the last decades, including the preparation of composites. The development of effective bioceramic composite scaffolds relies on effective manufacturing techniques able to control the final multi-scale porosity of the devices, relevant to ensure osteointegration and bio-competent mechanical performance. In this context, the present work provides an overview about the reported strategies to develop and optimize bioceramics, while also highlighting future perspectives in the development of bioactive ceramic composites for bone tissue regeneration.

A novel anticaries agent, honokiol-loaded poly(amido amine) dendrimer, for simultaneous long-term antibacterial treatment and remineralization of demineralized enamel

OBJECTIVE

Existing agents to induce enamel self-repair and inhibit the progression of dental caries in the early stage have been proven to be inadequate and far from satisfactory. In this study, a honokiol-loaded poly(amido amine) (PAMAM) dendrimer (PAMH) was constructed to combat early caries lesions in enamel.

METHODS

PAMH was prepared via a codissolution method. Computational simulation analysis was used to explore the mechanism of honokiol release. The cytotoxicity of PAMH was tested. The antibacterial effects of PAMH were tested by planktonic growth assays and biofilm formation inhibition assays. The remineralization effect of PAMH was examined via transverse microradiography and scanning electron microscopy after a pH cycling model. The in vivo anti-caries effect of PAMH was carried out in a rat model.

RESULTS

Honokiol released from PAMH was slower but more durable in a cariogenic pH environment than in a neutral pH environment, which could be explained through the computational simulation analysis results. Under electrostatic action, P3 beads with the same charge repelled each other and extended outwards, resulting in the rapid expansion of the PAMAM dendrimer and accelerating the release of the drug. At a low pH of 5.5, the protonated P3 beads were not charged and the protonated P1 beads were positively charged. However, the electrostatic repulsive interaction between protonated P1 beads was restricted by the P3 beads in the outermost layer of the PAMAM dendrimer, so the swelling rate was relatively slow, resulting in the slow release of drug molecules in the acidic environment. The cytotoxicity demonstration and the biocompatibility experiment in animal study showed that PAMH is biologically safe. PAMH showed excellent enamel remineralizing ability after pH cycling and showed a long-term antibacterial effect in vitro. Meanwhile, PAMH showed long-term anticaries efficacy in vivo.

SIGNIFICANCE

Our findings indicated that PAMH had great potential to combat early caries lesions in enamel for future clinical application.

Enamel-like tissue regeneration by using biomimetic enamel matrix proteins

Enamel regeneration currently -is limited by our inability to duplicate artificially its complicated and well-aligned hydroxyapatite structure. The initial formation of enamel occurs in enamel organs where the ameloblasts secret enamel extracellular matrix formed a unique gel-like microenvironment. The enamel extracellular matrix is mainly composed by amelogenin and non-amelogenin. In this study, an innovative strategy was proposed to regenerate enamel-like tissue by constructing a microenvironment using biomimetic enamel matrix proteins (biomimetic EMPs) composed of modified leucine-rich amelogenin peptide (mLRAP) and non-amelogenin analog (NAA). Impressively, the regenerated enamel in this biomimetic EMPs on etched enamel surface produced prismatic structures, and showed similar mechanical properties to natural enamel. The results of X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR) showed that regenerated crystal was hydroxyapatite. Molecular dynamics simulation analysis showed the binding energy between mLRAP and NAA were electrostatic forces and Van der Walls. These results introduced a promising strategy to induce crystal growth of enamel-like hydroxyapatite for biomimetic reproduction of materials with complicated hierarchical microstructures.

Effect of bioactive glasses and neodymium:yttrium-aluminum-garnet laser on dentin permeability

Context:

Dental hypersensitivity and loss of dental tissues are commonly observed in patients, and most of the problems are caused due to total or partial exposure of dentinal tubules.

Aims:

The purpose of this study is to evaluate the performance of 45S5 bioactive glass and niobophosphate (NbG) associated with neodymium: yttrium-aluminum-garnet (Nd:YAG) laser for the reduction of dentin permeability.

Materials and Methods:

Fifty bovine dentin discs were made and distributed randomly into five groups (n = 10). The Nd:YAG laser was applied with the bioactive glasses using the energy parameters (60 and 80 mJ), forming the groups; NbG_60: NbG + Nd:YAG (60 mJ); NbG_80: NbG + Nd:YAG (80 mJ), 45S5_60: 45S5 + Nd:YAG (60 mJ); 45S5_80: 45S5 + Nd:YAG (80 mJ) and C: control (untreated dentin). The permeability was measured with a split chamber device. The samples were subjected to the erosive challenge and a new permeability measurement was done. Furthermore, the dentin was analyzed by scanning electron microscopy/energy-dispersive X-ray spectroscopy (SEM/EDS).

Statistical Analysis Used:

The data were analyzed using Kruskal–Wallis and Dunn's tests (α = 0.05).

Results:

Greater reduction in dentinal permeability was observed for 45S5 bioactive glasses (45S5_60 and 45S5_80) followed by NbG_80 and NbG_60 (P < 0.05). The SEM/EDS analysis showed the formation of a barrier after the dentin treatment.

Conclusions:

Bioactive glasses with Nd:YAG laser on the dentin surface may be a promising alternative for the reduction of dentin permeability.

In situ evaluation of desensitizing toothpastes for protecting against erosive tooth wear and its characterization

OBJECTIVE

This five-phase, single-blind, crossover in situ trial evaluated the effects of desensitizing or anti-erosive toothpastes on dentin erosive wear and tubule occlusion.

MATERIALS AND METHODS

Some characteristics such as relative dentin abrasivity (RDA), viscosity (V), cytotoxicity, and fluoride and calcium (Ca) availability of the toothpastes were also tested. Samples were positioned on removable intraoral appliances from 15 volunteers (n=4), according to the groups, C-control (0 ppm fluoride), F-sodium monofluorophosphate (MFP), A-MFP and arginine+calcium carbonate, CSP-calcium sodium phosphosilicate, and CS-MFP and calcium silicate+sodium phosphate. Erosion-abrasion cycling was performed (1% citric acid, 2min, 6×/day; toothbrushing, 5s, 2×/day). Surface loss (SL) was evaluated by optical profilometry. Environmental scanning electron microscopy images (ESEM) counted the number of open dentin tubules (ODTs). Data were statistically analyzed (α=0.05).

RESULTS

There were no significant differences in SL among groups (p=0.468). The ODT for CSP, CS, and A groups were significantly lower than the control. CSP and CS presented significantly less ODT than F, but they did not significantly differ from A. F and CS were more abrasive than all the other toothpastes; CSP was more abrasive than A, and C was the least abrasive. CSP presented higher V (p<0.05). All toothpastes presented lower cell viability than the control without toothpaste exposure. F and A presented significantly higher values of F^- (p<0.05). All fluoride toothpastes had similar amount of Ca, differing from the control (p<0.05).

CONCLUSION

Although the toothpastes caused similar degree of erosive wear, CSP and CS were able to occlude the dentin tubules.

CLINICAL RELEVANCE

Desensitizing toothpastes containing calcium, sodium, phosphate, and silicate could be a suitable option for treating dentin hypersensitivity.

Effectiveness of decontamination protocols when analyzing ancient DNA preserved in dental calculus

Ancient DNA analysis of human oral microbial communities within calcified dental plaque (calculus) has revealed key insights into human health, paleodemography, and cultural behaviors. However, contamination imposes a major concern for paleomicrobiological samples due to their low endogenous DNA content and exposure to environmental sources, calling into question some published results. Decontamination protocols (e.g. an ethylenediaminetetraacetic acid (EDTA) pre-digestion or ultraviolet radiation (UV) and 5% sodium hypochlorite immersion treatments) aim to minimize the exogenous content of the outer surface of ancient calculus samples prior to DNA extraction. While these protocols are widely used, no one has systematically compared them in ancient dental calculus. Here, we compare untreated dental calculus samples to samples from the same site treated with four previously published decontamination protocols: a UV only treatment; a 5% sodium hypochlorite immersion treatment; a pre-digestion in EDTA treatment; and a combined UV irradiation and 5% sodium hypochlorite immersion treatment. We examine their efficacy in ancient oral microbiota recovery by applying 16S rRNA gene amplicon and shotgun sequencing, identifying ancient oral microbiota, as well as soil and skin contaminant species. Overall, the EDTA pre-digestion and a combined UV irradiation and 5% sodium hypochlorite immersion treatment were both effective at reducing the proportion of environmental taxa and increasing oral taxa in comparison to untreated samples. This research highlights the importance of using decontamination procedures during ancient DNA analysis of dental calculus to reduce contaminant DNA.

In Vitro Enamel Remineralization Efficacy of Calcium Silicate-Sodium Phosphate-Fluoride Salts versus NovaMin Bioactive Glass, Following Tooth Whitening

Objectives  This study aimed to evaluate the effect of in-office bleaching on the enamel surface and the efficacy of calcium silicate-sodium phosphate-fluoride salt (CS) and NovaMin bioactive glass (NM) dentifrice in remineralizing bleached enamel.

Materials and Methods  Forty extracted premolars were sectioned mesio-distally, and the facial and lingual enamel were flattened and polished. The samples were equally divided into nonbleached and bleached with 38% hydrogen peroxide (HP). Each group was further divided according to the remineralization protocol ( n = 10); no remineralization treatment (nontreated), CS, or NM, applied for 3 minutes two times/day for 7 days, or CS combined with NR-5 boosting serum (CS+NR-5) applied for 3 minutes once/day for 3 days. The average Knoop hardness number (KHN) and surface roughness (utilizing atomic force microscopy) were measured. Surface topography/elemental analysis was analyzed by using scanning electron microscopy/energy dispersive X-ray analysis. All the tests were performed at baseline, after bleaching, and following each remineralization protocol. Data were statistically analyzed by two-way analysis of variance and Bonferroni post hoc multiple comparison tests (α = 0.05).

Results  HP significantly reduced KHN and increased roughness ( p < 0.05). All remineralization materials increased the hardness and reduced the surface roughness after bleaching except NM, which demonstrated significantly increased roughness ( p < 0.05). Ca/P ratio decreased after bleaching ( p < 0.05 ), and following treatment, CS and CS+NR-5 exhibited higher remineralization capacity in comparison to NM ( p < 0.05).

Conclusion  Although none of the material tested was able to reverse the negative effect of high-concentration in-office HP on enamel completely, the remineralization efficacy of CS and CS+NR-5 was superior to that of NM.

Microshear Bond Strength of Composite Resin to Enamel Treated With Titanium Tetrafluoride and the Carbon Dioxide Laser (10.6 µm): An In Vitro Study

Introduction: The present study aims to assess the microshear bond strength (µSBS) of composite to enamel treated with titanium tetrafluoride (TiF4 ) and CO₂ laser irradiation. Methods: Fifteen human molars were sectioned and their enamel surfaces were abraded. The sections were randomly assigned to 5 groups (n=15): (CO); control group, (AP); treated with 1.23% acidulated phosphate fluoride (APF) for 4 minutes, (Ti); 4% TiF₄ for 1 minute, (L+AP); CO₂ laser irradiation (10.6 µm wavelength, 1 W peak power, 10 ms pulse duration, 500 ms repetition time, 0.2 mm beam spot size at the tissue level, 2 cm distance of handpiece tip to tissue surface (DSE, South Cores) followed by 1.23% APF, and (L+ Ti); 10.6μm CO₂ laser irradiation followed by 4% TiF₄ for one minute. Using Tygon tubes, Z250 (3M/ESPE) composite was bonded to the surface of the samples. The µSBS of composite to enamel was measured using a microtensile testing machine after 500 thermal cycles. The data were analyzed by one-way ANOVA and the Tukey HSD test (P <0.05). Results: The mean µSBS was 20.66, 20.21, 13.44, 23.01, and 10.16 MPa in CO, AP, Ti, L+AP, and L+Ti groups respectively. Significant differences were observed between CO and Ti (P =0.026) and also CO and L+ Ti (P <0.0001). Conclusion: The application of TiF₄ per se and after CO₂ laser irradiation on enamel decreased the µSBS of composite to enamel; on the other hand, APF alone and after laser irradiation did not have any adverse effect on the µSBS of composite to enamel.

Effectiveness of a toothpaste and a serum containing calcium silicate on protecting the enamel after interproximal reduction against demineralization

To evaluate the effectiveness of a calcium silicate/phosphate fluoridated tooth paste and a serum compared with a toothpaste containing hydroxyapatite on protecting the enamel after interproximal reduction against demineralization. 3 sets of eleven incisors were created. The teeth underwent interproximal enamel reduction (IER) of 0.5 mm. Each set was allocated to one of three groups: (1) Brushing without toothpaste (control group); (2) Vitis toothpaste + Remin Pro; (3) Regenerate toothpaste + Regenerate Serum. The agents were applied three times a day and specimens subjected to demineralization cycles for 30 days. The weight percentages of calcium (Ca) and phosphorous (P) were quantified by X-ray microfluorescence spectroscopy. Surface microhardness measurements and electron scanning microscopy (SEM) observations were made. Ca data and the Ca/P ratio were significantly higher in Group 3 than the other groups (p < 0.017), while P was significantly lower in Group 3 (p < 0.017). No significant differences were found between Groups 1 and 2 (p > 0.017). Group 3 showed significantly higher microhardness values (p < 0.05) than Group 1. No significant differences were found for other comparisons between groups (p < 0.05). SEM images showed less demineralization in Group 3. The application of a calcium silicate/phosphate fluoridated tooth paste (Regenerate advance) and a dual serum (Regenerate advance enamel serum) protect the enamel with interproximal reduction against demineralization. Therefore, this treatment could be used to prevent the dissolution of hydroxyapatite after IER.