Fluoride, pH Value, and Titratable Acidity of Commercially Available Mouthwashes

AIM

The primary objective of this work was to assess total soluble fluoride (TSF), pH values, and titratable acidity (TA) of various mouthwashes "in vitro," and the second was to compare fluoride content on labels with measured TSF.

METHODS

Commercial mouthwashes were collected and analysed. Company, type, manufacturer data, and active ingredients (essential oils [EO], cetylpyridinium chloride [CPC], chlorhexidine [CHX], and fluoride) were described. TSF, pH, and TA capacity were measured. Descriptive quantitative analysis were performed per mouthwash.

RESULTS

In total, 54 mouthwashes from 20 brands were included. These included mouthwashes with the active ingredients EO (n = 11), CPC (n = 17), CHX (n = 18), and fluoride (n = 32); 27 mouthwashes with more than 1 of these active ingredients; and 4 with none of the above-mentioned ingredients. Fluoride was present in different formulations; most contained sodium fluoride (NaF), and a few had sodium monofluorophosphate and amine fluoride + NaF. The pH values of all evaluated mouthwashes ranged from 4.1 to 7.9. Twenty mouthwashes presented pHs below 5.5, of which 10 contained fluoride. TA ranged from 0 to 48. According to the manufacturer data, mouthwashes with fluoride had concentrations from 217 to 450 ppm, with 90% in the range from 217 to 254 ppm. Laboratory data revealed that TSF ranged from 229 to 500 ppm, with 90% in the range from 229 to 337 ppm. A statistically significant difference was observed between measured TSF and the labelled fluoride content on the packaging of the fluoride mouthwashes (mean difference, 43.92 ± 34.34; P < .001). Most of these mouthwashes contained at least the amount of fluoride as mentioned on the packaging (93%).

CONCLUSION

The pH values and TA of commercially available mouthwashes showed a large variation. TSF levels of the fluoride mouthwashes were found to be at least the amount of fluoride as labelled. Dental care professionals should be aware of the pH, TA, fluoride content, and other active ingredients of different mouthwashes to better understand their potential impact on oral health.

TROG 15.03/ANZUP International Multicenter Phase II Trial of Focal Ablative STereotactic RAdiotherapy for Cancers of the Kidney (FASTRACK II)

PURPOSE/OBJECTIVE(S)

Stereotactic body radiotherapy (SBRT) is an emerging non-invasive alternative for primary renal cell cancer (RCC) in patients unsuitable for surgery. The objective of the FASTRACK II clinical trial was to investigate the efficacy of SBRT for primary RCC.

MATERIALS/METHODS

This non-randomized, intergroup multi-institutional phase II study was activated in 7 Australian centers and 1 Dutch center, through the Trans Tasman Radiation Oncology Group (TROG) and the Australian and New Zealand Urogenital and Prostate Cancer Trials Group (ANZUP). Eligible patients had biopsy confirmed diagnosis of primary RCC with a single lesion within a kidney, ECOG performance ≤2 and were medically inoperable, high risk or declined surgery. For tumors ≤4 cm a single fraction of 26 Gy was prescribed, for tumors > 4 cm, 42 Gy in three fractions was prescribed. The primary outcome of the study was to estimate the efficacy of SBRT for primary RCC, defined as local control based on RECIST criteria. The study was powered assuming that 1-year local control would be 90%, with the null hypothesis of ≤80% considered undesirable and not worthy of proceeding to a future randomized controlled trial.

RESULTS

Between July 2016 and February 2020, 70 patients were enrolled with a median follow-up of 42 months. Median age was 77 years. Forty-nine patients were male (70%), median BMI was 32 and median Charlson comorbidity score was 7. The median [IQR] RENAL complexity score was 8 [7-10]. Biopsy confirmation was 100%. Twenty-three patients (33%) had T1a disease. The median (interquartile range [IQR]) tumor size was 4.6cm [3.7-5.5]; it was 3.3cm [3.0-3.6] in those receiving single fraction (n = 23), and 5.3cm [4.6-6.0] in those receiving 3-fraction SBRT (n = 47). During real-time pre-treatment quality assurance review, 10 cases (14.3%) required resubmission for protocol deviation, 2119 variables were assessed at final review, and final protocol compliance was 99.3%. Seven (10%) patients experienced grade 3 treatment-related adverse events, with no grade 4 or 5 events observed. Eleven (16%) patients reported no adverse events. Local control was 100% throughout the lifetime of the trial (p<0.001). Cancer-specific survival was also 100% throughout the lifetime of the trial. Freedom from distant failure (95% CIs) at 1 and 3 years was 99% (90-100%). Overall survival (95% CIs) at 1 and 3 years was 99% (90-100%) and 82% (70-89%), respectively. Baseline mean eGFR (95% CI) was 61.1 mLs/min (56.6; 65.6) and reduced by -10.8 mLs/min (-13.0; -8.6) by 1-year, by -14.6 mLs/min (-17.0; -12.2) by 2-years and plateaued thereafter.

CONCLUSION

In the first multicenter prospective trial of a non-surgical primary RCC cohort, enrolling mostly T1b+ disease, SBRT was an effective treatment strategy with no observed local failures. We observed an acceptable side effect profile and renal function after SBRT. These outcomes support the design of a future randomized clinical trial of SBRT versus surgery for primary RCC. The trial was registered with ID: NCT02613819.

Fluoride and urea chewing gums in an intra-oral experimental caries model

The aim of the present investigation was to evaluate the effect of sugar-free chewing gums containing fluoride (F) and urea in an intra-oral experimental caries model. Placebo chewing gums (without any active ingredient) and no gum served as controls. Fifteen subjects participated in a cross-over, single-blind study. Demineralised enamel and dentine blocks were embedded in circular plastic discs and bonded to the buccal surfaces of the lower canines and first premolars. The discs were removed and analysed using transversal microradiography after each of the six 4-week periods during which the subjects used either test or placebo products or no product. The results revealed that frequent use of sugar-free chewing gum is sufficient to inhibit further demineralisation of previously demineralised enamel and dentine specimens in the oral cavity. Comparing F, urea and placebo gums, the data showed that there was little or no difference between the products, except for an inhibitory effect on the chewing side of the dentition after using F chewing gums.

Somatotopic organization of human secondary somatosensory cortex

This fMRI study investigated the human somatosensory system, especially the secondary somatosensory cortex (SII), with respect to its potential somatotopic organization. Eight subjects received electrical stimulation on their right second finger, fifth finger and hallux. Within SII, the typical finding for both fingers was a representation site within the contralateral parietal operculum roughly halfway between the lip of the lateral sulcus and its fundus, whereas the representation site of the hallux was found more medially to this position at the fundus of the lateral sulcus, near the posterior pole of the insula. Somatotopy in SII seems to be less fine-grained than in primary somatosensory cortex (SI), as, in contrast to SI, no separate representations of the two fingers in SII were observed. A similar somatotopic representation pattern between fingers and the hallux was also observed within ipsilateral SII, indicating somatotopy of contra- as well as ipsilateral SII using unilateral stimulation. Further areas exhibiting activation were found in the superior and inferior parietal lobule, in the supplementary and cingulate motor area, and in the insula.

Representational overlap of adjacent fingers in multiple areas of human primary somatosensory cortex depends on electrical stimulus intensity: an fMRI study

Functional magnetic resonance imaging (fMRI) was used to examine the influence of non-painful electrical stimulus intensity on the BOLD response in human primary somatosensory cortex (SI). In ten healthy subjects, index and middle finger of the right hand were stimulated separately at two different stimulus intensities. The activated volume of single finger representations as well as the volume of representational overlap of the two activations increased following an increase in stimulus intensity. This effect was seen in two different subdivisions of SI, one in the depth of the central sulcus, presumably corresponding to Brodmann area (BA) 3b, and one on the crown of the postcentral gyrus, presumably corresponding to BA 1/2. Relative overlap (ratio of overlap volume to volume of individual finger representation) was larger in BA 1/2 than in BA 3b. Additionally, in both areas relative overlap increased significantly from low to high stimulus intensity. Relative overlap did not change when different correlation thresholds were employed arguing against an unspecific 'spillover effect'. Analysis of signal intensity time courses indicated that the response difference to high versus low stimulus strength was not present during the initial seconds of stimulation, during which both led to a similar signal intensity increase. Only during the following maintenance level of the response did the response to high stimulus intensity reach a significantly higher plateau level than the one due to low intensity stimulation, an effect which was present in both areas, BA 3b and BA 1/2, respectively.

Relationship between mineral distributions in dentine lesions and subsequent remineralization in vitro

Though the mineral distribution of the dentine carious lesion varies largely from tooth to tooth and from patient to patient, there are two main distribution profiles that characterize natural carious lesions in dentine. These profiles include softened and subsurface lesion types. The mineral distribution relationship between the starting profile and the profile after remineralization is not known. In order to study the relational aspects, we have produced demineralized dentine samples in vitro with mineral profiles similar to those of typical natural carious lesions, and subsequently remineralized the samples in a remineralizing solution with various fluoride concentrations (0, 2 and 10 ppm F). The mineral distributions were obtained by using an improved microradiographic technique. In addition, the nature of deposited mineral was analyzed by diamond-coupled total internal reflectance spectroscopy. Definite relationship was observed between the original lesion mineral distribution and the mineral distributions following remineralization. The amount of mineral present in approximately the first 50 microm of the lesion influenced the overall mineral profile after remineralization, possibly through influencing ion transport. If the amount was high (> approximately 10 vol%), the deposited mineral was confined to the surface (0-50 microm). The original mineral at those depths acted like a nucleus of mineral regrowth when the amount of residual mineral was intermediate, and like a transport barrier when the surface layer was well mineralized. If a surface barrier was not present, mineral was deposited at deeper depths in the lesion. Fluoride effect on dentine remineralization was dependent on the original mineral content and its distribution in the lesion. Although a high concentration of fluoride was very effective in low-mineral lesions, it produced hyperremineralization on well-mineralized subsurface lesions so that it prevented effective remineralization especially in deeper lesions.

Influence of nail varnish on the remineralization of enamel single sections assessed by microradiography and confocal laser scanning microscopy

Single-section techniques are attractive in enamel de- and remineralization investigations because they allow longitudinal studies in which mineral changes can be assessed by microradiography (TMR). Nail varnish (NV) is in general applied to coat the cut thin-section sides. The aims of this study were to investigate: (1) NV penetration depth in cut surfaces of demineralized enamel, (2) the influence of NV on cut surfaces of demineralized enamel on TMR, (3) the influence of NV penetration on a following remineralization. Cut surfaces of thin sections of demineralized enamel were NV coated; the NV was peeled off and the penetration depth assessed by confocal laser scanning microscopy. The NV penetration was 18+/-5 micrometer (mean+/-SD) in demineralized enamel. To evaluate the possible influence of NV on TMR, cut surfaces of thin sections of demineralized enamel were coated (twice) and microradiographed before and after nail varnishing. The NV effect (total effect of penetrated and surface NV) on the main parameters of TMR, Ld and DeltaZ, was less than 5% of the mean values. In the remineralization experiment (remineralization with 1.5 mM Ca2+, 0.9 mM phosphate, pH 7, 1 ppm F for 1 and 2 weeks), lesions in bulk samples, lesions in thin sections with NV-coated cut surfaces and lesions in thin sections in a PMMA (polymethylmethacrylate) holder were compared. (1) The remineralization of bulk samples and of NV-coated thin sections is different in one aspect. The amounts of mineral deposited in the lesions expressed as DeltaZ are comparable after 1 week. But because the NV penetrates part of the lesion outside, there was an Ld difference. The lesion depth difference between bulk lesions and NV-coated lesions in thin sections was statistically significant and was about 19% less in NV-coated lesions after 1 week; after 2 weeks of remineralization there was no difference in Ld between bulk- and NV-coated lesions any more. (2) There was no difference in remineralization efficacy between lesions in bulk samples and lesions in thin sections in the PMMA holder.

Effect of toothpicks with and without fluoride on De- and remineralization of enamel and dentine in situ

The aim of this investigation was to study the effect of the interproximal use of fluoride (F)-impregnated and non-impregnated birch toothpicks on the degree of de- and remineralization of enamel and dentine in situ. Ten volunteers with complete dentures in the upper jaw participated. Each subject had four specimens: (1) sound enamel, (2) demineralized enamel, (3) sound dentine and (4) demineralized dentine; placed pairwise at two approximal sites (15/16 and 25/26) of the maxillary prosthesis. The study involved three test periods (A, B and C), each lasting 4 weeks. In A, the subjects used F toothpicks (impregnated in 4% NaF) and, in B, nonimpregnated toothpicks 3 times daily. During period C, no toothpicks were used. Dentifrice or other F-containing products were not allowed during the 4-week periods. Transversal microradiography was used to determine lesion depth (ld) and mineral loss (DeltaZ). The results revealed that all the sound samples lost mineral during the three experimental periods; DeltaZ for both enamel and dentine was less for A and B compared with C (p<0.01) and less for A compared with B and C for dentine (p<0.05, p<0.01). The demineralized samples also lost mineral, apart from dentine, during periods A and B, i.e. when F-impregnated and non-impregnated toothpicks were used; ld for enamel and DeltaZ for dentine were less for A compared with C (p<0.05). Four weeks' use of toothpicks, especially F-impregnated toothpicks, thus reduces the demineralization of enamel and dentine at approximal sites in situ.

The remineralization of EDTA-treated human dentine

The remineralization of whole human dentine treated with a neutral EDTA solution was investigated: the treatment periods were 15, 30 and 120 min. From the literature it is known that EDTA removes noncollagenous proteins (NCPs) from dentine powders. In order to extract more phosphoproteins from dentine lesions, in part of this work samples were also treated with 1 M NaCl or 4 M guanidine chloride solutions. All the dentine samples after the treatments mentioned were immersed subsequently in a remineralizing solution without fluoride for 2 weeks and microradiographed. To investigate the effects of fluoride, samples treated with EDTA for 120 min were also remineralized with 2 ppm fluoride in solution. The results presented show that: (1) Measurable remineralization did not occur when fluoride was free in the remineralizing solution. Because remineralization occurred neither at the lesion front nor in the nonmineral part of the surface-softened tissue, presumably the NCPs (inhibitors) of underlying dentine diffused into the tissue during the remineralization period. (2) 2 ppm fluoride caused remineralization at the lesion front. In this case we assume fluoride either acted as nucleating agent or overcame the NCP effects at the lesion front.

In vitro remineralization of in vivo and in vitro formed enamel lesions

Thin sections of natural white spot enamel lesions (WS) and of artificial in vitro lesions (VL) were remineralized simultaneously in vitro. The sections, clamped in a PMMA holder, were microradiographed at baseline and after remineralization in a calcium- and phosphate-containing solution (pH = 7.0; 1 ppm F) after 2 and 4 weeks. All data were analyzed with respect to baseline. The results show that the lesion depth values did not change significantly during 2 and 4 weeks of remineralization. The mineral accumulation (change in DeltaZ), however, was substantial and significant in WS and VL. In WS the change in mineral accumulation was roughly proportional to the amount of mineral at baseline. The WS accumulated more than two times the amount of mineral than VL in the same periods of remineralization. After 4 weeks of remineralization the maximum mineral value Vmax in the surface layer of the WS was nearly up to the sound enamel level thick approximate87 vol%. This study shows that the technique and calculation procedure described make this single section method attractive for longitudinal demineralization-remineralization studies in vitro or in situ. Both WS and VL samples obviously remineralized in vitro similarly with respect to the baseline. Furthermore, this in vitro work indicates that remineralization inhibitors present in saliva, and previously penetrated into the enamel tissue, do not influence remineralization later on.

The effect of window width on the demineralization of human dentine and enamel

When lesion formation in dental enamel or dentine is studied in vitro, a well-defined area of the material, a 'window', is exposed to the demineralization medium. In the present experiments, we report the effect of window width on lesion formation in enamel and dentine. Rectangular windows, longest dimension always 5 mm and shortest dimension varying from 0.5 to 5 mm, were exposed to demineralization media. Lesions in dentine were formed by placing the specimens in an acidified unstirred 6% carboxymethyl cellulose (CMC) gel, an unstirred 0.5% CMC gel, a mildly stirred 0.5% CMC gel, or in a mildly stirred demineralization solution. Lesions in enamel were formed only in an unstirred acidified 6% CMC gel. pH in the demineralization media was 5.0 in all experiments. The microradiographic technique was used to assess lesion depth and mineral loss (vol% x microm) of lesions formed. Lesions formed in the unstirred gels were deeper, and there was a larger mineral loss, the narrower the window. There was no effect of window size on lesions formed in stirred systems. These effects can be explained by the strong dependence of concentration gradient in stirred gels just outside the exposed window on the window size. The phenomenon found here in vitro may at least partly explain why secondary caries may lead to localized, but relatively deep, lesions.

Cariostatic effect of a light-cured, resin-reinforced glass-ionomer for bonding orthodontic brackets in vivo. A combined study using microradiography and confocal laser scanning microscopy

The aim of this study was to evaluate in vivo the cariostatic potential of the resin-reinforced glass-ionomer (Vitremer core build-up restorative; 3M Dental Product Division) when used as a bonding agent for orthodontic brackets. The mineral distribution and topography of the enamel surface adjacent to the bracket base was determined by quantitative microradiography (TMR) and confocal laser scanning microscopy (CLSM). The study was designed in split-mouth technique using 9 pairs of premolars to be extracted for orthodontic reasons. One tooth of each pair was bonded with the resin-reinforced glass-ionomer, and the control contralateral premolar with the non-fluoridated composite (Concise, 3M Dental Products Division). After 4 weeks all teeth were extracted and stored until analysis. The lesion depths and mineral loss values in enamel adjacent to brackets bonded with Vitremer were significantly lower than in teeth bonded with the composite, indicating that the resin-reinforced glass-ionomers significantly reduced caries lesion development in vivo. CLSM images show a severe cariogenic challenge around orthodontic brackets and support TMR measurements.

Electron probe microanalysis and transverse microradiography studies of artificial lesions in enamel and dentin: a comparative study

In cardiology and research involving the interactions between restorative materials and dental hard tissues, it is important for small changes in tooth mineral content to be measurable. Currently, transverse microradiography (TMR) is the most accepted tool for the above purpose. Electron Probe Microanalysis (EPMA) can yield both qualitative identification of elements and quantitative compositional information. The purpose of this study was to compare the mineral distribution in well-defined artificial lesions, in dentin and enamel, by the use of both TMR and EPMA on the same sample. The good correlation between the two sets of data validates EPMA as a technique and helps in the interpretation of its results. The data from TMR analysis are expressed as vol% of mineral, while EPMA gives the levels of Ca and phosphate in wt%. The conversion between the two sets of data is complicated by the fact that local density is, as yet, unknown.

The caries-preventive effect of titanium tetrafluoride on root surfaces in situ as evaluated by microradiography and confocal laser scanning microscopy

The aim of the present study was to investigate the cariostatic effect of titanium tetrafluoride (TiF4) on in situ-induced lesions on human root surfaces. Analysis of the samples was carried out by quantitative microradiography (TMR) and confocal laser scanning microscopy (CLSM). Pre-molar roots, sectioned into four pieces, were used for sample preparation. Before they were mounted into the recesses prepared in the acrylic intra-oral appliances, two root pieces from each tooth were treated with 4% TiF4 for 1 min, while the remaining two pieces served as controls. The appliances were worn by 12 volunteers for 4 wks. After 4 wks with no fluoride supplementation, the root pieces were removed and analyzed by TMR and CLSM. The TMR results showed that the TiF4 treatment reduced lesion depth and total mineral loss by 56% and 62%, respectively. CLSM images agreed well with the TMR measurements. A dense light-reflecting surface layer with almost intact subsurface structures was evident in the TiF4-treated samples.

Caries development in fluoridated and non-fluoridated deciduous and permanent enamel in situ examined by microradiography and confocal laser scanning microscopy

The aim of the study was to compare initial caries development in fluoridated and non-fluoridated deciduous and permanent enamel in situ. Enamel slabs were mounted in removable appliances and worn for 4 wks. Significantly larger lesions developed in deciduous than in permanent enamel when no topical fluorides were used. Fluoride mouthrinsing partly prevented lesion development in deciduous and completely in permanent enamel. Initial enamel caries not detected by microradiography can be visualized by CLSM (confocal laser scanning microscopy).

Cerebral haemoglobin oxygenation during sustained visual stimulation--a near-infrared spectroscopy study

Using near-infrared spectroscopy, we investigated the time-course of the concentrations of oxygenated haemoglobin, [oxy-Hb], and deoxygenated haemoglobin [deoxy-Hb], in the occipital cortex of healthy human adults during standard sustained visual stimulation. Within a few seconds after stimulation (by coloured dodecahedron), we observed a decrease in [deoxy-Hb], peaking after 13 s ('initial undershoot'). In the subsequent 1-2 min, in seven out of ten subjects, [deoxy-Hb] gradually returned to a plateau closer to the baseline level. After cessation of stimulation, there was a 'post-stimulus overshoot' in [deoxy-Hb]. There was a statistically significant correlation between the size of the 'initial undershoot' and the post-stimulus overshoot'. The concentration of oxyhaemoglobin increased upon functional activation. However, in the mean across all subjects there was no 'initial overshoot'. After approximately 19 s it reached a plateau and remained constantly elevated throughout the activation period. After cessation of activation there was a 'post-stimulus undershoot' of oxyhaemoglobin. It is important to consider the time-course of haemoglobin oxygenation when interpreting functional activation data, especially those data obtained with oxygenation-sensitive methods, such as BOLD-contrast fMRI.

Microradiography and confocal laser scanning microscopy applied to enamel lesions formed in vivo with and without fluoride varnish treatment

The aim of the present investigation was to combine 2 techniques suitable for lesion characterization: quantitative microradiography (TMR) and confocal laser scanning microscopy (CLSM) on in vivo induced lesions with and without a fluoride varnish (Duraphat) treatment. Orthodontic bands were attached to premolars to be extracted for orthodontic reasons to induce enamel caries on the buccal surfaces. In the caries development part of the study, 1 tooth of each pair received at the start 1 topical application with the fluoride varnish Duraphat, the contralateral tooth serving as untreated control. All teeth were extracted after 4 weeks. In the caries progression part, the premolars were banded for 4 weeks without any treatment to induce caries, 1 premolar in each pair was then extracted and analyzed. The contralateral tooth received one Duraphat application and was extracted after another 2 weeks. In the caries development part of the study, TMR analysis showed that the Duraphat treatment on sound enamel reduced lesion depth by 48% compared to the untreated control. In the caries progression part, no significant difference was found between the untreated teeth extracted after 4 weeks and the fluoride treated lesions extracted after another 2 weeks. CLSM images agreed well with the TMR measurements. In the fluoride treated lesions, the CLSM images showed more light scattering indicating precipitation of material.

Raman spectra of human dentin mineral

Human dentin mineral has been investigated by using micro-Raman spectroscopy. Fluorescence and thermal problems were largely avoided by preparing dentin samples by grinding and ultrasonic agitation in acetone. The Raman spectral features were consistent with those of impure hydroxyapatite containing CO3 and HPO4. While spectral differences between enamel and dentin were clearly observable as changes in the bandwidth of the PO4(3-)V1 band and the intensities of the OH-, CO3(2-) and HPO4(2-) bands, the technique could not detect spectral differences between coronal and root dentin. NaOCl, NaF and APF-gel treatments caused measurable changes in intensities of the bands due to CO3(2-) and HPO4(2-); the results were found to be useful for band assignments. After NaOCl treatment, the Raman bands, presumably due to amide and HPO4(2-), were lost, but the band intensity of the CO3(2-)V1 bands increased by 35-60%. This increase coincided with the appearance of a new broad band (250-300 cm-1). The same treatment on enamel caused no increase in the CO3(2-)V1 band intensity. This NaOCl-induced carbonate could be removed within 20 h in a 1000 ppm NaF solution. These findings indicate that the carbonate ions induced by the NaOCl treatment are presumably in or on the mineral surface. After 3 min of APF-gel treatment on NaOCl-pretreated dentin, the intensities of the hydroxyapatite phosphate bands dropped by approximately 20%, and newly formed CaF2 and HPO4 bands became observable.

Effect of sodium hypochlorite treatment on remineralization of human root dentine in vitro

Dentine consists simplified of mineral and of several organic components. Sodium hypochlorite (NaOCl) is a well-known nonspecific proteolytic agent capable to remove organic material. The aim of this study was to investigate the influence of organic material removal from artificial dentine lesions by means of NaOCl pretreatment on subsequent remineralization with and without fluoride. Human root dentine samples were demineralized in an acidic gel (pH = 5) at 37 degrees C for 2 weeks. After 2 min of pretreatment with a 0.4, 2 or 10% NaOCl solution, the samples were remineralized in a 20 mM HEPES buffer (pH = 7) containing 1.5 mM Ca(2) and 0.9 mM phosphate with or without addition of 10 ppm F(-) as NaF at 37 degrees C for 8 days. Mineral profiles were assessed by means of transversal microradiography after diol treatment to avoid shrinkage caused by drying. In a separate experiments the dentine contraction caused by 10% NaOCl was assessed. The contraction (negligible for sound dentine) was found to be about 12% for the lesions. The remineralization results showed that pretreatment with a 10% NaOCl solution for 2 min, increased lesion remineralization. After NaOCl treatment, the amount of accumulated mineral increased by about 27% without F in the remineralization solution, and by about 4% with 10 ppm in solution. The in vitro results suggest that removal of organic materials from dentine lesions is an interesting approach to enhance remineralization.

Effect of post-brushing water rinsing on caries-like lesions at approximal and buccal sites

The aim was to study the effect of two different water rinsing procedures after toothbrushing with an NaF-containing dentifrice on the degree of de- or remineralization of enamel and dentine at approximal and buccal sites. Seven adults, wearing complete dentures, participated in two experimental periods (A and B) in a randomised order. During period A, they brushed with the dentifrice for 2 min, followed by 1-min active mouthrinse with the toothpaste-foam combined with 10 ml of water. No more water was used after the slurry had been spat out. During period B, the brushing was followed by 3 thorough rinsings of approximately 15 ml water each. These two procedures were carried out twice daily, i.e. in the morning (after breakfast) and in the evening (just before bedtime), during 3 months. Demineralized enamel and dentine samples were mounted at two locations--approximally and buccally--in the first molar region of the upper prostheses. Quantitative microradiography (TMR) was used to assess the lesion depth (ld) and the mineral loss (delta Z). The results showed that the approximally located samples continued to lose mineral during both periods A and B. However, the ld and delta Z values for enamel (p < 0.01) and dentine (p < 0.05) increased less during A than B. The buccally located enamel and dentine samples remineralized during the experiment, but no statistically significant differences were found for the ld and delta Z values of either enamel or dentine between periods A and B.(ABSTRACT TRUNCATED AT 250 WORDS)

The influence of air-drying on hyper-remineralization of demineralized dentine: a study on bulk as well as on thin wet section of bovine dentine

The influence of air-drying on the remineralization of demineralized bovine dentine was examined in wet bulk samples, in dried bulk samples as well as in wet thin sections. Bulk samples of bovine dentine were first demineralized in an acidic gel (pH = 5) at 37 degrees C for 3 weeks. After 24-hour pre-treatment of either air-drying or immersion in water, the bulk samples were remineralized in a solution containing 1.5 mM Ca, 0.9 mM phosphate and 10 ppm F (pH = 7) at 37 degrees C for 2, 4 or 8 days. Separately thin sections prepared from demineralized bulk dentine were immersed in water for 24 h and were also exposed to the remineralization solution for 2, 4 or 8 days. The results show that air-drying of the bulk samples increased remineralization of dentine considerably; the microradiographic parameters (ld, delta Z and la) show that the degree of remineralization ranks: thin wet sections > bulk dried > bulk wet. Especially, the remineralization inside lesions was greatly enhanced in thin sections and dried samples. It is presumed that the increased remineralization in dried samples is caused by a 'sponge effect', in which the remineralization fluid is sucked up in a dried shrunken lesion, resulting in fast and deep penetration of remineralization solution and/or presumably increased nucleation.

Effect of air-drying on demineralized and on sound coronal human dentine: a study on density and on lesion shrinkage

Recently, several papers investigated the linear dimensional changes in dentine after air-drying. This paper pertains to weight changes, volume changes, and density changes caused by air-drying of sound and demineralized intact dentine. The densities of sound and artificially demineralized human coronal dentine were measured in the wet state and after various drying periods of up to 24 h. The volume was assessed either by means of a pyknometer (wet samples) or by means of dimension measurements. The air-drying experiments were done using a Mettler thermobalance at room temperature. The density of wet sound coronal dentine was found to be 2.24 +/- 0.12 g.cm-3; the value of wet demineralized dentine was about 1.6 g.cm-3. The data show that previously published density values of powdered sound dentine may have been influenced by powdering effects, air-drying, and air inclusion. In whole demineralized air-dried dentine, air inclusion can be very severe: up to 30% by volume. The results show furthermore that in demineralized dentine we have two drying stages: during the first one (up to about 10 min of air-drying), the lesions shrink about 23%, while a main part of the water in the lesion evaporates, and air is incorporated into the tissue; during the second stage (drying longer than 10 min), the lesions hardly shrink anymore, but water is evaporated mainly from underlying sound dentine, followed by air incorporation.

The diameter of dentinal tubules in human coronal dentine after demineralization and air drying. A combined light microscopy and SEM study

The diameter of dentinal tubules after demineralization and/or air drying has been quantified using light microscopy and scanning electron microscopy (SEM). The tubule diameter was assessed at a distance of about 1.5 mm (range 1.0-2.0 mm) from the pulp. Tubule diameter was measured in the wet state, after 10-min and 12-hour air drying as well as after critical point drying (CO2) by SEM. The results show that drying effects on tubule diameter are small in sound tissue, but are sizeable in demineralized dentine. Comparing light microscopic (wet) and SEM observations show that the differences in tubule diameter are small for sound but substantial for demineralized dentine. An important result is that in the wet state the diameters of the tubules (being 1.3 +/- 0.2 microns in sound dentine) are 2.5 +/- 0.3, 2.2 +/- 0.3 and 1.7 +/- 0.2 microns after 1, 2 and 3 weeks of demineralization, respectively. The decreased tubule diameter with increasing demineralization may be important for permeability and transport phenomena in dentine caries and presumably in hypersensitivity.

Low level laser therapy for dentinal tooth hypersensitivity

A comparative double blind study testing low level laser therapy (Gallium/Aluminium/Arsenide laser [GaAlAs]) against placebo was carried out in the management of dentinal tooth hypersensitivity. Subjects demonstrating dentinal hypersensitivity and complying with strict selection criteria were randomly assigned to an active and placebo group. Low level laser therapy was applied for one minute to both the apex and cervical area of the tooth; and reapplied at one week, two-week and eight-week intervals. Dentinal hypersensitivity was rated at each visit. There were 28 subjects in the placebo group and 22 and 21 subjects, respectively, in the tactile sensitivity and thermal sensitivity groups. Comparisons between the groups were conducted using independent groups t-test. In both the tactile and thermal sensitivity groups differences between the active and placebo groups were significant from the first week and increased further in the second and eighth weeks. The mean value of thermal sensitivity decreased 67 per cent (p < 0.001) compared with placebo (17 per cent) and tactile sensitivity decreased 65 per cent (p = .002) compared with placebo (21 per cent) at eight weeks. Results demonstrate that the GaAlAs laser is an effective method for the treatment of both thermal and tactile dentinal hypersensitivity. There were no reported adverse reactions or instances of oral irritation.

Effect of a combined chlorhexidine and NaF mouthrinse: an in vivo human caries model study

Chlorhexidine (CHX) is probably the most widely used and the most potent chemical plaque inhibitory agent, whereas fluoride (F-) is the only truly accepted anticaries agent available at present. As they have discrete mechanisms of action, a combination effect of these agents on human dental caries may exist. The inhibitory effect of CHX on the formation of, and acid production in, plaque may reduce a relatively extreme cariogenic challenge sufficiently for it to be overcome by the local F- concentrations achieved by brushing or rinses. The aim of this study was to evaluate the possible caries inhibitory effect of combining 2.2 mM CHX mouthrinses used twice daily with daily 11.9 mM NaF rinses in an in vivo human caries model using plaque-retaining bands on premolars scheduled for extraction. Nine subjects (a total of 28 teeth) were fitted with the bands for 4 wk. Saliva and plaque samples were collected before and after the study period for bacterial cultures, and the tooth surfaces were analyzed by microradiography after careful tooth extractions. The combination of CHX and F- rinses resulted in enamel mineral loss only slightly higher than that observed in "sound" enamel and clearly less than with F- rinses alone. Both total plaque bacteria and Streptococcus mutans were reduced by CHX rinses, confirming the discrete mechanisms of action.

Effect of frequent consumption of starchy food items on enamel and dentin demineralization and on plaque pH in situ

The aim of this cross-over study was to determine the cariogenic potential of starchy food items as between-meal snacks. This was done by measuring demineralization of human enamel and dentin as well as the pH of dental plaque in situ. Eight volunteers with complete dentures carried two enamel and two dentin specimens, mounted in the molar regions of their mandibular prostheses. There were three test periods, each lasting for 21 days, followed in a randomized order: (1) consumption of starchy food products, 12-15 times a day, in addition to the normal diet (starch period); (2) consumption of sucrose products, 12-15 times a day, in addition to the normal diet (sucrose period); and (3) no addition of test products to the normal diet (control period). Both the starch and the sucrose diets increased the demineralization of enamel and dentin compared with the control period. However, only the sucrose period resulted in significant demineralization of dentin compared with the control period. The plaque pH, followed during 60 min after a one-minute mouthrinse with 10% sucrose, was lower at all time points after both the starch and the sucrose periods compared with the control period.

The effect of titanium tetrafluoride (TiF4) application around orthodontic brackets

In the present in vivo study, the cariostatic potential of a titanium tetrafluoride (TiF4) solution applied topically around orthodontic brackets was investigated with quantitative microradiography. Also characteristics of the TiF4-treated enamel surface were examined with scanning electron microscopy (SEM). Ten pairs of premolars to be extracted for orthodontic treatment were used in the first part of this study. Brackets were bonded on all teeth with an orthodontic adhesive, and 10 randomly selected premolars served as controls, whereas a similar number were treated with 1% TiF4 around brackets for 60 seconds. After 4 weeks with no topical fluoride supplementation, all teeth were extracted and stored for analysis. Results indicated the 1% TIF4 solution reduced lesion depths and total mineral loss, at the bracket periphery, significantly during the 4-week period. The presence of a surface coating was demonstrated by SEM micrographs. It was concluded that TiF4 may provide a high level performance as a prophylactic agent for orthodontic purposes.

Effect of xylitol and sorbitol in chewing-gums on mutans streptococci, plaque pH and mineral loss of enamel

Seventeen subjects with more than 3 x 10(5) mutans streptococci per millilitre of saliva completed this randomised, cross-over study. Four different chewing-gums, containing: (1) 70% xylitol, (2) 35% xylitol + 35% sorbitol, (3) 17.5% xylitol + 52.5% sorbitol, and (4) 70% sorbitol, were tested. The participants used 12 pieces of each gum per day for 25 days. During the four experimental periods, they wore a removable palatinal plate containing two demineralised enamel samples, and brushed their teeth with a non-fluoridated toothpaste. The results showed that an increased concentration of xylitol in the gum resulted in a lower number of mutans streptococci in both saliva and dental plaque, although the decreases were only significant in the saliva samples (p < 0.01). The pH drop in plaque, measured in vivo after a 1-min mouthrinse with a 10% sorbitol solution, was least pronounced after the 70% xylitol gum and most pronounced after the 70% sorbitol gum period (p < 0.01). No significant differences were found after a mouthrinse with a 10% sucrose solution. All demineralised enamel samples lost mineral during the experimental periods. However, the lesion depth as well as the mineral loss values, assessed microradiographically, did not differ significantly between the four chewing-gums.

Shrinkage of sound and demineralized human coronal dentine slabs

In this article a method is presented for dentine shrinkage measurements. The relative shrinkage of sound dentine slabs is assessed using a Perthometer with respect to a steel reference. The relative shrinkage of lesions in dentine slabs can be estimated using combined Perthometer/microradiography measurements. The results show that the relative lesion shrinkage of lesions in thick slabs is quite different from the shrinkage of lesions in thin sections used for microradiography. The relative lesion shrinkage is, for periods up to 30 min, linear with the air drying period and increases strongly with the demineralization period. The previously published diol treatment is capable of reducing the relative lesion shrinkage in thick dentine slabs to negligible values.

Shrinkage prevention of in vitro demineralized human dentine in transversal microradiography

The shrinkage of demineralized dentine is a serious problem in the assessment of mineral distributions and mineral changes by means of microradiography. In this article it is shown that a treatment with ethanediol of the thin slices used for transversal microradiography prevents shrinkage for about 1 h. Without this so-called diol treatment, the shrinkage effects in demineralized dentin are about 20% in lesion depth and about 30% in mineral loss (delta Z) after 120-second drying in air. The prevention of shrinkage by diol treatment of dentine lesions is not influenced by the presence of a surface layer.

Cariostatic effect and fluoride release from a visible light-curing adhesive for bonding of orthodontic brackets

This study was designed to investigate the cariostatic potential in vivo of a visible light-curing adhesive for the bonding of orthodontic brackets. The fluoride release of the adhesive in water and saliva was also measured. Ten orthodontic patients with premolars to be extracted participated. One bracket with Heliosit-Orthodontic (no fluoride) was positioned on the buccal surface of one premolar (control), and another bracket with Orthodontic cement VP 862 (containing fluoride) was positioned on the experimental contralateral premolar. The adhesives were cured with a Heliolux II lamp, and the teeth were extracted after 4 weeks. The patients used a fluoride toothpaste during the experiment. The mineral content of the enamel adjacent to the brackets was determined by quantitative microradiography. The fluoride release from disk-shaped plates of the fluoride adhesive was measured in water for a 6-month period and in human saliva for 24 hours. The fluoride adhesive reduced lesion depths by about 48% than the nonfluoride adhesive (P less than 0.05, t test). The largest release of fluoride from the plates in water was observable within the first week. However, a significant amount of fluoride was still released after 6 months. The fluoride release in saliva was significantly lower in human saliva at pH 7 than in water (P less than 0.01, t test). When salivary pH was lowered to 4, to mimic a cariogenic challenge, the amount of fluoride released increased up to the value measured in water. It was concluded that the regular use of fluoride toothpastes is insufficient to inhibit lesion development around orthodontic brackets.(ABSTRACT TRUNCATED AT 250 WORDS)