Microbial alkaline proteases: from a bioindustrial viewpoint

Design-build-test of recombinant Bacillus subtilis chassis cell by lifespan engineering for robust bioprocesses

Microbial cell factories utilize renewable raw materials for industrial chemical production, providing a promising path for sustainable development. Bacillus subtilis is widely used in industry for its food safety properties, but challenges remain in the limitations of microbial fermentation. This study proposes a novel strategy based on lifespan engineering to design robust B. subtilis chassis cells to supplement traditional metabolic modification strategies that can alleviate cell autolysis, tolerate toxic substrates, and get a higher mass transfer efficiency. The modified chassis cells could produce high levels of l-glutaminase, and tolerate hydroquinone to produce α-arbutin efficiently. In a 5 L bioreactor, the l-glutaminase enzyme activity of the final strain CRE15TG was increased to 2817.4 ± 21.7 U mL-1, about 1.98-fold compared with that of the wild type. The α-arbutin yield of strain CRE15A was increased to 134.7 g L-1, about 1.34-fold compared with that of the WT. To our knowledge, both of the products in this study performed the highest yields reported so far. The chassis modification strategy described in this study can Improve the utilization efficiency of chassis cells, mitigate the possible adverse effects caused by excessive metabolic modification of engineered strains, and provide a new idea for the future design of microbial cell factories.

Purification, characterization and application of collagenolytic protease from Bacillus subtilis strain MPK

A new extracellular protease from Bacillus subtilis strain MPK with collagenolytic activity was isolated and purified. Fish skin which otherwise would be treated as waste is used as substrate for the production of protease. Using various techniques such as ammonium sulphate precipitation and ion exchange chromatography, protease was purified and characterized subsequently. Protease of approximately 61 kDa molecular weight was purified by 135.7-fold with 18.42% enzyme recovery. The protease showed effective properties like pH and temperature stability over a broad range with optimum pH 7.5 and temperature 60 °C. Km and Vmax were found to be 1.92 mg ml-1 and 1.02 × 10-4 mol L-1 min-1, respectively. The protease exhibited stability in various ions, surfactants, inhibitors and organic solvents. Subsequently, the protease was successfully utilized for collagen hydrolysis to generate collagen peptides; thus, the produced protease would be a potential candidate for multifaceted applications in food and pharmaceutical industries due to its significant characteristics and collagenolytic properties.

Perspective on Agricultural Industrialization: Modification Strategies for Enhancing the Catalytic Capacity of Keratinase

Keratinases is a special hydrolytic enzyme produced by microorganisms, which has the ability to catalyze the degradation of keratin. Currently, keratinases show great potential for application in many agricultural and industrial fields, such as biofermented feed, leather tanning, hair removal, and fertilizer production. However, these potentials have not yet been fully unleashed on an industrial scale. This paper reviews the sources, properties, and catalytic mechanisms of keratinases. Strategies for the molecular modification of keratinases are summarized and discussed in terms of improving the substrate specificity, thermostability, and pH tolerance of keratinases. The modification strategies are also enriched by the introduction of immobilized enzymes and directed evolution. In addition, the selection of modification strategies when facing specific industrial applications is discussed and prospects are provided. We believe that this review serves as a reference for the future quest to extend the application of keratinases from the laboratory to industry.

Immobilization of alkaline protease produced by Streptomyces rochei strain NAM-19 in solid state fermentation based on medium optimization using central composite design

This study evaluated Streptomyces rochei strain NAM-19 solid-state fermentation of agricultural wastes to produce alkaline protease. Alkaline protease production increased with flaxseed, rice bran, and cheese whey fermentation reaching 147 U/mL at 48 h. Statistical optimization of alkaline protease production was performed using the central composite design (CDD). Results of CDD and the optimization plot showed that 4.59 g/L flaxseed, 4.31 g/L rice bran, 4.17 mL cheese whey, and a vegetative inoculum size of 7.0% increased alkaline protease production by 27.2% reaching 186 U/mL. Using the 20-70% ammonium sulfate fractionation method, the optimally produced enzyme was partially purified to fivefold. The partially purified alkaline protease was then covalently immobilized on a biopolymer carrier, glutaraldehyde-polyethylene-imine-κ-carrageenan (GA-PEI-Carr), with 90% immobilization efficiency. Characterizations revealed that immobilization improved thermostability, reusability, optimum temperature, and sensitivity towards metal ions of the free enzyme. The optimal temperature for free and immobilized enzymes was 40 and 50 °C, respectively. Both enzymes had the same optimum pH of 10. Immobilization increased Km from 19.73 to 26.52 mM and Vmax from 56.7 to 62.5 mmol min-1L-1. The immobilized enzyme retained 35% of its initial activity at 70 °C, while the free enzyme retained only 5%. The immobilized enzyme kept 80% of its initial activity at the 20th cycle. After 7 weeks of storage, the free enzyme lost all its initial activity, whereas the immobilized enzyme retained 50%. The free and immobilized enzymes were able to hydrolyze gelatin, and azo-casein demonstrating different relative activity, 85, 80, 90 and 95%, respectively, compared to casein (100%).

Kinetic studies on optimized extracellular laccase from Trichoderma harzianum PP389612 and its capabilities for azo dye removal

BACKGROUND

Azo dyes represent a common textile dye preferred for its high stability on fabrics in various harsh conditions. Although these dyes pose high-risk levels for all biological forms, fungal laccase is known as a green catalyst for its ability to oxidize numerous dyes.

METHODS

Trichoderma isolates were identified and tested for laccase production. Laccase production was optimized using Plackett-Burman Design. Laccase molecular weight and the kinetic properties of the enzyme, including Km and Vmax, pH, temperature, and ionic strength, were detected. Azo dye removal efficiency by laccase enzyme was detected for Congo red, methylene blue, and methyl orange.

RESULTS

Eight out of nine Trichoderma isolates were laccase producers. Laccase production efficiency was optimized by the superior strain T. harzianum PP389612, increasing production from 1.6 to 2.89 U/ml. In SDS-PAGE, purified laccases appear as a single protein band with a molecular weight of 41.00 kDa. Km and Vmax values were 146.12 μmol guaiacol and 3.82 μmol guaiacol/min. Its activity was stable in the pH range of 5-7, with an optimum temperature range of 40 to 50 °C, optimum ionic strength of 50 mM NaCl, and thermostability properties up to 90 °C. The decolorization efficiency of laccase was increased by increasing the time and reached its maximum after 72 h. The highest efficiency was achieved in Congo red decolorization, which reached 99% after 72 h, followed by methylene blue at 72%, while methyl orange decolorization efficiency was 68.5%.

CONCLUSION

Trichoderma laccase can be used as an effective natural bio-agent for dye removal because it is stable and removes colors very well.

Characterization and Hydrolysis Mechanism Analysis of a Cold-Adapted Trypsin-Like Protease from Antarctic Krill

Cold-adapted proteases are capable of efficient protein hydrolysis at reduced temperatures, which offer significant potential applications in the area of low temperature food processing. In this paper, we attempted to characterize cold-adapted proteases from Antarctic krill. Antarctic krill possesses an extremely active autolytic enzyme system in their bodies, and the production of peptides and free amino acids accompanies the rapid breakdown of muscle proteins following the death. The crucial role of trypsin in this process is recognized. A cold-adapted trypsin named OUC-Pp-20 from Antarctic krill genome was cloned and expressed in Pichia pastoris. Recombinant trypsin is a monomeric protein of 26.8 ± 1.0 kDa with optimum reaction temperature at 25 °C. In addition, the catalytic specificity of OUC-Pp-20 was assessed by identifying its hydrolysis sites through LC-MS/MS. OUC-Pp-20 appeared to prefer Gln and Asn at the P1 position, which is an amino acid with an amide group in its side chain. Hydrolysis reactions on milk and shrimp meat revealed that it can effectively degrade allergenic components in milk and arginine kinase in shrimp meat. These findings update the current knowledge of cold-adapted trypsin and demonstrate the potential application of OUC-Pp-20 in low temperature food processing.

Molecular Cloning, Characterization, and Application of Organic Solvent-Stable and Detergent-Compatible Thermostable Alkaline Protease from Geobacillus thermoglucosidasius SKF4

Several thermostable proteases have been identified, yet only a handful have undergone the processes of cloning, comprehensive characterization, and full exploitation in various industrial applications. Our primary aim in this study was to clone a thermostable alkaline protease from a thermophilic bacterium and assess its potential for use in various industries. The research involved the amplification of the SpSKF4 protease gene, a thermostable alkaline serine protease obtained from the Geobacillus thermoglucosidasius SKF4 bacterium through polymerase chain reaction (PCR). The purified recombinant SpSKF4 protease was characterized, followed by evaluation of its possible industrial applications. The analysis of the gene sequence revealed an open reading frame (ORF) consisting of 1,206 bp, coding for a protein containing 401 amino acids. The cloned gene was expressed in Escherichia coli. The molecular weight of the enzyme was measured at 28 kDa using sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE). The partially purified enzyme has its highest activity at a pH of 10 and a temperature of 80°C. In addition, the enzyme showed a half-life of 15 h at 80°C, and there was a 60% increase in its activity at 10 mM Ca2+ concentration. The activity of the protease was completely inhibited (100%) by phenylmethylsulfonyl fluoride (PMSF); however, the addition of sodium dodecyl sulfate (SDS) resulted in a 20% increase in activity. The enzyme was also stable in various organic solvents and in certain commercial detergents. Furthermore, the enzyme exhibited strong potential for industrial use, particularly as a detergent additive and for facilitating the recovery of silver from X-ray film.

Carotenoid characterization, fatty acid profiles, and antioxidant activities of haloarchaeal extracts

Microorganisms that can survive in saline environments, known as halotolerant or halophilic organisms, have a wide range of current and potential uses in biotechnology. In this study, it was aimed to determine the carotenoids of halophilic archaea strains isolated from the brine samples taken from different points of Salt Lake (Turkey) and determine the antioxidant activities of their carotenoids. To identify the halophilic archaea strains, they were cultivated in MAM JCM 168 medium and subjected to antibiotic susceptibility, fatty acid, two-dimensional and three-dimensional imaging by scanning electron microscopy and atomic force microscopy, biochemical and phylogenetic assays. The findings show that five different halophilic archaea strains have been identified as Halorubrum lipolyticum, Halorubrum sodomense, Haloarcula salaria, Halorubrum chaoviator, and Haloarcula japonica with 98% and above similarity ratio. The main fatty acids of all haloarchaeal strains were octadecanoic acid (C18:0) and palmitic acid (C16:0). The major carotenoid of the species was determined as all-trans bacterioruberin, and different carotenoid types such as lycopene, β-carotene, and 2-isopentenyl-3,4-dehydrorodopin were found as well as bacterioruberin isomers. The antioxidant activities of carotenoids extracted from the species were analyzed by the 2,2-diphenyl-1-picrylhydrazyl radical scavenging method and the extracts showed antioxidant activity statistically significantly higher than ascorbic acid and butylated hydroxytoluene as reference products (p < 0.05).

Production of dehairing protease by Bacillus cereus VITSN04: a model cradle-to-cradle approach for sustainable greener production of leathers

Despite several attempts over decades, process scalability and sustainability remain a challenge to produce an environmental-friendly enzyme to gain industrial attention. In the present study, microbial degradation of chrome shavings (chromium-collagen leather waste) and the resulting collagen hydrolysate for producing the dehairing protease by Bacillus cereus VITSN04 were investigated in a lab-scale fermentor. Scale-up degradation of shavings resulted in higher recovery of collagen hydrolysate (76%) within 72 h compared to shake flasks (68% in 120 h). Earlier achieved medium composition of collagen hydrolysate (12 g L-1) and molasses (15 g L-1) appeared to induce amylase at the high rate, despite the maximal production of protease (203.8 ± 0.18 U mL-1), which was analysed by ANS fluorescence spectroscopy. Optimization of the media containing collagen hydrolysate (12 g L-1) and molasses (5 g L-1) was effective in producing protease (170.6 ± 0.1 U mL-1) and reduced the co-synthesis of amylase (48.2 ± 0.09 U mL-1). The controlled fermentation process by feeding molasses during the exponential growth phase had enhanced the dehairing protease production (∼2.96 fold). The produced protease then partitioned through the biphasic system and showed significant dehairing of goat skins on the pilot scale. Thus, the scalability of the process to produce dehairing enzymes using waste, generated at the site of its use, offers hope for sustainable greener production of leathers.

Study of nano-hydroxyapatite tagged alkaline protease isolated from Himalayan sub-alpine Forest soil bacteria and role in recalcitrant feather waste degradation

Purified calcium serine metalloprotease from Stenotrophomonas maltophilia strain SMPB12 exhibits highest enzyme activity at pH 9 and temperature range between 15 °C-25 °C. Enzyme supplemented with 40 μM Ca-Hap-NP (NP-protease) showed maximum elevated activity of 17.29 μmole/min/ml (1.9-fold of original protease activity). The thermostability of the enzyme was maintained for 1 h at 60 °C over an alkaline pH range 7.5-10, as compared to the NP untreated enzyme whose activity was of 8.97 μmole/min/ml. A significant loss of activity with EDTA (1.05 μmole/min/ml, 11.75 %), PMSF (0.93 μmole/min/ml, 10.46 %) and Hg2+ (3.81 μmole/min/ml, 42.49 %) was also observed. Kinetics study of NP-protease showed maximum decreases in Km (28.11 %) from 0.28 mM (NP untreated enzyme) to 0.22 mM (NP-protease) along with maximum increase in Vmax (42.88 %) from 1.25 μmole/min/ml to 1.79 μmole/min/ml at varying temperatures. The enhanced activity of NP-protease was able to efficiently degrade recalcitrant solid wastes like feather to produce value-added products like amino acids and helps in declogging recalcitrant solid wastes. The nano-enabled protease may be utilized in a smaller amount for degrading in bulk recalcitrant solid proteinaceous waste at 15 °C temperature as declogging agents providing an eco-friendly efficient process.

Identification, Isolation, Cloning, and Expression of a New Alkaline Serine Protease Gene from Native Iranian Bacillus sp. RAM 53 for Use in the Industry

Proteases are one of the most important and widely applicable proteolytic enzymes that are used in various industries. The aim of this study was to identify, isolate, characterize, and clone the new extracellular alkaline protease from the native bacterium Bacillus sp. RAM53 that was isolated from rice fields in Iran. In this study, first, the primary assay of protease production was performed. The bacteria were cultured in a nutrient broth culture medium at 37° C for 48 h, and then, the enzyme extraction was performed. Enzyme activity was measured by standard methods in the range of 20 to 60 °C and the range of pH 6.0 to 12. Degenerate primers were designed to alkaline protease gene sequences. The isolated gene was cloned into the pET28a+ vector, the positive clones were transferred to Escherichia coli BL21, and the expression of the recombinant enzyme was optimized. The results showed that the optimum temperature and pH of the alkaline protease were 40° C and 9.0, respectively, and were stable at 60° C for 3 h. The molecular weight of the recombinant enzyme was 40 kDa in SDS-PAGE. The recombinant alkaline protease was inhibited by the PMSF inhibitor, indicating that the enzyme was serine protease. The results showed that the sequence alignment of the enzyme gene with the other alkaline protease gene sequences related to Bacillus was 94% identity. The result of Blastx showed about 86% identity to the S8 peptidase family in Bacillus cereus and Bacillus thuringiensis and other Bacillus species. The enzyme may be useful for various industries.

Alkaliphilic/Alkali-Tolerant Fungi: Molecular, Biochemical, and Biotechnological Aspects

Biotechnologist interest in extremophile microorganisms has increased in recent years. Alkaliphilic and alkali-tolerant fungi that resist alkaline pH are among these. Alkaline environments, both terrestrial and aquatic, can be created by nature or by human activities. Aspergillus nidulans and Saccharomyces cerevisiae are the two eukaryotic organisms whose pH-dependent gene regulation has received the most study. In both biological models, the PacC transcription factor activates the Pal/Rim pathway through two successive proteolytic mechanisms. PacC is a repressor of acid-expressed genes and an activator of alkaline-expressed genes when it is in an active state. It appears, however, that these are not the only mechanisms associated with pH adaptations in alkali-tolerant fungi. These fungi produce enzymes that are resistant to harsh conditions, i.e., alkaline pH, and can be used in technological processes, such as in the textile, paper, detergent, food, pharmaceutical, and leather tanning industries, as well as in bioremediation of pollutants. Consequently, it is essential to understand how these fungi maintain intracellular homeostasis and the signaling pathways that activate the physiological mechanisms of alkali resistance in fungi.

Isolation and characterization of detergent-compatible amylase-, protease-, lipase-, and cellulase-producing bacteria

Detergent-compatible enzymes are the new trend followed by most in the detergent industry. Cellulases, lipases, proteases, and amylases are among the enzymes frequently used in detergents. Detergent-compatible enzymes can be obtained from many organisms, but the stability, cheapness, and availability of microbial enzymes make them preferable in industrial areas. In the present study, soil samples contaminated with household waste were collected from different regions of Trabzon (Turkey) for amylase-, cellulase-, protease-, and lipase-producing bacteria. A total of 55 bacterial isolates differing in colony morphology were purified from the samples and 25 of the isolates gave positive results in enzyme screening. The enzyme screening experiments revealed that 10 isolates produced amylase, 9 produced lipase, 7 produced cellulase, and 6 produced protease. While 2 isolates showed both protease and lipase activity, for 2 different isolates cellulose and amylase activity were detected together. It was also observed that one isolate, C37PLCA, produced all four enzymes. The morphological, physiological, and biochemical analyses of the bacteria from which we obtained the enzymes were performed and species close to them were determined using 16S rRNA sequences. Based on the results obtained, our enzymes show tremendous promise for the detergent industry.

Characteristics and Application of a Novel Cold-Adapted and Salt-Tolerant Protease EK4-1 Produced by an Arctic Bacterium Mesonia algae K4-1

Mesonia algae K4-1 from the Arctic secretes a novel cold-adapted and salt-tolerant protease EK4-1. It has the highest sequence similarity with Stearolysin, an M4 family protease from Geobacillus stearothermophilus, with only 45% sequence identity, and is a novel M4 family protease. Ek4-1 has a low optimal catalytic temperature (40 °C) and is stable at low temperatures. Moreover, EK4-1 is still active in 4 mol/L NaCl solution and is tolerant to surfactants, oxidizing agents and organic solvents; furthermore, it prefers the hydrolysis of peptide bonds at the P1' position as the hydrophobic residues, such as Leu, Phe and Val, and amino acids with a long side chain, such as Phe and Tyr. Mn²⁺and Mg²⁺ significantly promoted enzyme activity, while Fe³⁺, Co⁺, Zn²⁺ and Cu²⁺ significantly inhibited enzyme activity. Amino acid composition analysis showed that EK4-1 had more small-side-chain amino acids and fewer large-side-chain amino acids. Compared with a thermophilic protease Stearolysin, the cold-adapted protease EK4-1 contains more random coils (48.07%) and a larger active pocket (727.42 ų). In addition, the acidic amino acid content of protease EK4-1 was higher than that of the basic amino acid, which might be related to the salt tolerance of protease. Compared with the homologous proteases EB62 and E423, the cold-adapted protease EK4-1 was more efficient in the proteolysis of grass carp skin, salmon skin and casein at a low temperature, and produced a large number of antioxidant peptides, with DPPH, ·OH and ROO· scavenging activities. Therefore, cold-adapted and salt-tolerant protease EK4-1 offers wide application prospects in the cosmetic and detergent industries.

Biocatalytic Profiling of Free and Immobilized Partially Purified Alkaline Protease from an Autochthonous Bacillus aryabhattai Ab15-ES

Partially purified alkaline protease produced by an indigenous bacterial strain, Bacillus aryabhattai Ab15-ES, was insolubilized in alginate beads using an entrapment technique. Maximum entrapped enzyme activities of 68.76% and 71.06% were recorded at optimum conditions of 2% (w/v) sodium alginate and 0.3 M calcium chloride. Biochemical profiling of free and immobilized proteases was investigated by determining their activity and stability as well as kinetic properties. Both enzyme preparations exhibited maximum activity at the optimum pH and temperature of 8.0 and 50 °C, respectively. However, in comparison to the free enzyme, the immobilized protease showed improved pH stability at 8.0–9.0 and thermal stability at 40–50 °C. In addition, the entrapped protease exhibited a higher Vmax and increased affinity to the substrate (1.65-fold) than the soluble enzyme. The immobilized protease was found to be more stable than the free enzyme, retaining 80.88% and 38.37% of its initial activity when stored at 4 °C and 25 °C, respectively, for 30 d. After repeated use seven times, the protease entrapped in alginate beads maintained 32.93% of its original activity. These findings suggest the efficacy and sustainability of the developed immobilized catalytic system for various biotechnological applications.

Fungal alkaline proteases and their potential applications in different industries

The consumption of various enzymes in industrial applications around the world has increased immensely. Nowadays, industries are more focused on incorporating microbial enzymes in multiple processes to avoid the hazardous effects of chemicals. Among these commercially exploited enzymes, proteases are the most abundantly used enzymes in different industries. Numerous bacterial alkaline proteases have been studied widely and are commercially available; however, fungi exhibit a broader variety of proteases than bacteria. Additionally, since fungi are often recognized as generally regarded as safe (GRAS), using them as enzyme producers is safer than using bacteria. Fungal alkaline proteases are appealing models for industrial use because of their distinct spectrum of action and enormous diversity in terms of being active under alkaline range of pH. Unlike bacteria, fungi are less studied for alkaline protease production. Moreover, group of fungi growing at alkaline pH has remained unexplored for their capability for the production of commercially valuable products that are stable at alkaline pH. The current review focuses on the detailed classification of proteases, the production of alkaline proteases from different fungi by fermentation (submerged and solid–state), and their potential applications in detergent, leather, food, pharmaceutical industries along with their important role in silk degumming, waste management and silver recovery processes. Furthermore, the promising role of alkali–tolerant and alkaliphilic fungi in enzyme production has been discussed briefly. This will highlight the need for more research on fungi growing at alkaline pH and their biotechnological potential.

Biochemical Characterization and Application of a Detergent Stable, Antimicrobial and Antibiofilm Potential Protease from Bacillus siamensis

Proteases are important enzymes that are engaged in a variety of essential physiological functions and have a significant possible use in industrial applications. In this work, we reported the purification and biochemical characterization of a detergent stable, antimicrobial, and antibiofilm potential protease (SH21) produced by Bacillus siamensis CSB55 isolated from Korean fermented vegetable kimchi. SH21 was purified to obtain homogeneity via ammonium sulfate precipitation (40-80%), Sepharose CL-6B, and Sephadex G-75 column. By analyzing the SDS-PAGE and zymogram, it was determined that the molecular weight was around 25 kDa. The enzyme activity was almost completely inhibited in the presence of PMSF and DFP, which indicated that it was a member of the serine protease family. SH21 showed excellent activity with a broad range of pH and temperature, with its maximum pH of 9.0 and temperature of 55 °C. The enzyme had estimated K_m and V_max values of 0.197 mg/mL and 1.22 × 10³ U/mg, respectively. In addition, it preserved good activity in the presence of different organic solvents, surfactants, and other reagents. This enzyme showed good antimicrobial activity that was evaluated by MIC against several pathogenic bacteria. Furthermore, it exhibited strong antibiofilm activity as determined by MBIC and MBEC assay and degraded the biofilms, which were analyzed by confocal microscopic study. These properties established that SH21 is a potent alkaline protease that can be used in industrial and therapeutic applications.

Purification and thermodynamic characterization of acid protease with novel properties from Melilotus indicus leaves

A thermostable acid protease from M. indicus leaves was purified 10-fold using a 4-step protocol. We were able to isolate a purified protease fraction with a molecular weight of 50 kDa and exhibited maximal protease activity at pH 4.0 and 40 °C. Structural analysis revealed that the protease is monomeric and non-glycosylated. The addition of epoxy monocarboxylic acid, iodoacetic acid, and dimethyl sulfoxide significantly reduced protease activity while dramatically increasing the inhibition of Mn²⁺, Fe²⁺, and Cu²⁺. The activation energy of the hydrolysis reaction (33.33 kJ mol^-1) and activation energy (E_d = 105 kJ mol^-1), the standard enthalpy variation of reversible protease unfolding (2.58 kJ/mol) were calculated after activity measurements at various temperatures. Thermal inactivation of the pure enzyme followed first-order kinetics. The half-life (t_1/2) of the pure enzyme at 50 °C, 60 °C, and 70 °C was 385, 231, and 154 min, respectively. Thermodynamic parameters (entropy and enthalpy) suggested that the protease was highly thermostable. This is the first report on the thermodynamic parameters of proteases produced by M. indicus. The novel protease appears to be particularly thermostable and may be important for industrial applications based on these thermodynamic properties.

Alkaline Protease Production from Bacillus gibsonii 6BS15-4 Using Dairy Effluent and Its Characterization as a Laundry Detergent Additive

Protease is a widely used enzyme particularly in the detergent industry. In this research, we aimed to isolate alkaline protease-producing bacteria for characterization as a laundry detergent additive. The screening of alkaline protease production was investigated on basal medium agar plus 1% skim milk at pH 11, with incubation at 30°C. The highest alkaline protease-producing bacterium was 6BS15-4 strain, identified as Bacillus gibsonii by 16S rRNA gene sequencing. While the optimum pH was 12.0, the strain was stable at pH range 7.0-12.0 when incubated at 45°C for 60 min. The alkaline protease produced by B. gibsonii 6BS15-4 using dairy effluent was characterized. The optimum temperature was 60°C and the enzyme was stable at 55°C when incubated at pH 11.0 for 60 min. Metal ions K+, Mg2+, Cu2+, Na+, and Zn2+ exhibited a slightly stimulatory effect on enzyme activity. The enzyme retained over 80% of its activity in the presence of Ca2+, Ba2+, and Mn2+. Thiol reagent and ethylenediaminetetraacetic acid did not inhibit the enzyme activity, whereas phenylmethylsulfonyl fluoride significantly inhibited the protease activity. The alkaline protease from B. gibsonii 6BS15-4 demonstrated efficiency in blood stain removal and could therefore be used as a detergent additive, with potential for various other industrial applications.

Organic Fertilizers Shape Soil Microbial Communities and Increase Soil Amino Acid Metabolites Content in a Blueberry Orchard

The decline in soil nutrients is becoming a major concern of soil degradation. The possibility of using organic waste as a soil additive to increase nutrients and essential components is significant in soil quality protection and waste management. The aim of this study was to investigate the effects of composted spent mushroom substrate (MS), giant panda feces (PF), and cattle manure (CM) as organic fertilizers in soil microbial communities and metabolites in blueberry orchard in China, which were measured by using high-throughput sequencing and gas chromatography-mass spectrometry (GC-MS)-based metabolomics. Altogether, 45.66% of the bacterial operational taxonomic units (OTUs) and 9.08% of the fungal OTUs were detected in all treatments. Principal coordinates analysis demonstrated that the bacterial and fungal communities in MS and PF treatments were similar, whereas the communities in the not-organic fertilized control (CK) were significantly different from those in the organic fertilizer treatments. Proteobacteria, Acidobacteria, and Bacteroidetes were the dominant bacterial phyla, and Basidiomycota, Ascomycota, and Mortierellomycota the dominant fungal phyla. Redundancy analysis indicated that pH and available potassium were the main factors determining the composition of microbial communities. The fungal genera Postia, Cephalotrichum, and Thermomyces increased in organic fertilizer treatments, and likely promoted the degradation of organic fertilizers into low molecular-weight metabolites (e.g., amino acids). PCA and PLS-DA models showed that the metabolites in CK were different from those in the other three treatments, and those in CM were clearly different from those in MS and PF. Co-occurrence network analysis showed that several taxa correlated positively with amino acid contents. The results of this study provide new insights into organic waste reutilization and new directions for further studies.

Screening and Identification of Thermotolerant and Osmotolerant Bacillus amyloliquefaciens BKHE Isolated from Kinema of Eastern Nepal for Alkaline Protease Production

Alkaline protease is one of the most important industrial enzymes which are excessively used in the detergent industry, food industry, feed industry, pharmaceutical industry, leather industry, etc. 60% of the produced alkaline protease is consumed by the detergent industry alone. In the present study, bacterial isolates that can produce alkaline protease for purpose of bio-detergent were screened among the isolates isolated from kinema (an alkaline fermented food of eastern Nepal). Selected bacterial isolates were further screened for hemolysis activity and the production of other hydrolytic enzymes. Four bacterial isolates selected were tested for their capacity to produce alkaline protease in five different fermentation mediums. Isolate BKHE produces a high amount of alkaline protease (0.4705 ± 0.035 U/mL/min) in fermentation medium M2 (sucrose, 11 g/L; yeast extract, 5 g/L; and KNO3, 5.2 g/l, pH 9). The selected isolate was identified as Bacillus amyloliquefaciens BKHE based on 16S rRNA sequencing and phenotypic features. This bacterial strain was also found to be thermotolerant (confluent growth at 50°C) and salt tolerant up to 10% NaCl concentration. With its versatile ability, bacterial isolate or purified enzymes have potential applications in the food and detergent industry.

Purification, Characterization, and Application of Alkaline Protease Enzyme from a Locally Isolated Bacillus cereus Strain

Among the microbial enzymes protease and amylase are the most valuable enzymes which have been has diversified applications and used extensively because of their capabilities in the degradation of organic wastes, application in biofuels, agricultural, pharmaceuticals, chemical and biotechnological industries. The aim of the current research work was the purification, characterization and application of alkaline proteases extracted from Bacillus cereus AUST-7. Various concentrations of ammonium sulphate were applied for enzyme precipitation. Sephadex-G 100 was used in FPLC system for separation of protease from other proteins. SDS-PAGE was used to measure the molecular weight of required alkaline protease. Relative activities were determined against different pH, temperature, and incubation period to measure the enzymes activity. Stability of pH, temperature and various metal ions and inhibiter were also studied. Purified enzymes were applied on the goat skin to explore the dehairing efficacy. A 6.5 purification fold and 1163.50 U/mg of specific activity were obtained at 70% saturation and 35. 91 purification fold and 8902 U/mg of specific activity were observed after FPLC separation. The 35 kDa molecular size of protease enzyme was exhibited on the SDS-PAGE. The purified enzyme was stable at pH 10, temperature 55 °C and 35 min of incubation period. The purified enzyme was found to be stable at pH 8–11, thermo-stability at 50 °C and phenyl methyl sulphonyl fluoride (PMSF) and di-isopropyl fluorophosphates (DFP) inhibited the enzyme activity. The enzyme has good potential as dehairing agent in leather industries.

Current advances and research prospects for agricultural and industrial uses of microbial strains available in world collections

Microorganisms are an important component of the ecosystem and have an enormous impact on human lives. Moreover, microorganisms are considered to have desirable effects on other co-existing species in a variety of habitats, such as agriculture and industries. In this way, they also have enormous environmental applications. Hence, collections of microorganisms with specific traits are a crucial step in developing new technologies to harness the microbial potential. Microbial culture collections (MCCs) are a repository for the preservation of a large variety of microbial species distributed throughout the world. In this context, culture collections (CCs) and microbial biological resource centres (mBRCs) are vital for the safeguarding and circulation of biological resources, as well as for the progress of the life sciences. Ex situ conservation of microorganisms tagged with specific traits in the collections is the crucial step in developing new technologies to harness their potential. Type strains are mainly used in taxonomic study, whereas reference strains are used for agricultural, biotechnological, pharmaceutical research and commercial work. Despite the tremendous potential in microbiological research, little effort has been made in the true sense to harness the potential of conserved microorganisms. This review highlights (1) the importance of available global microbial collections for man and (2) the use of these resources in different research and applications in agriculture, biotechnology, and industry. In addition, an extensive literature survey was carried out on preserved microorganisms from different collection centres using the Web of Science (WoS) and SCOPUS. This review also emphasizes knowledge gaps and future perspectives. Finally, this study provides a critical analysis of the current and future roles of microorganisms available in culture collections for different sustainable agricultural and industrial applications. This work highlights target-specific potential microbial strains that have multiple important metabolic and genetic traits for future research and use.

Novel Detection Method for Evaluating the Activity of an Alkaline Serine Protease from Bacillus clausii

Until now, the detection methods for serine proteases have been quite time-consuming or cannot indicate the "real" protease activity. Here, a rapid and simple method for determining the "real" activity of serine proteases toward AAPX (a kind of mixed polypeptide substrates, with X representing 20 standard amino acids) was developed. This AAPX method has high reliability, sensitivity, and repeatability and can be used for detecting the serine protease activity spectrophotometrically. Additionally, the site-directed saturation mutagenesis library of alkaline serine protease PRO (BcPRO) from Bacillus clausii was screened with this AAPX method. Three beneficial mutants S99R, S99H, and S99W were identified, and S99W displayed the highest activity. In comparison to wild-type BcPRO, S99W exhibited enhanced catalytic performance toward eight AAPX monomers, and the molecular dynamics simulation revealed the mechanism responsible for its improved activity toward AAPM. Consequently, this work provides an efficient method for detecting, characterizing, mining, and high-throughput screening of serine proteases.

Bioconversion of Keratin Wastes Using Keratinolytic Microorganisms to Generate Value-Added Products

The management of keratinous wastes generated from different industries is becoming a major concern across the world. In each year, more than a billion tons of keratin waste is released into the environment. Despite some trials that have been performed and utilize this waste into valuable products, still a huge amount of keratin waste from different sources is a less explored biomaterial for making valuable products. This indicates that the huge amount of keratin waste is neither disposed properly nor converted into usable products rather thrown away to the environment that causes environmental pollution. Due to the introduction of this waste associated with different pathogenic organisms into soil and water bodies, human beings and other small and large animals are affected by different diseases. Therefore, there is a need for modern and ecofriendly approaches to dispose and convert this waste into usable products. Hence, the objective of this review is to give a concise overview regarding the degradation of keratin waste by biological approaches using keratinase producing microorganisms. The review also focuses on the practical use of keratinases and the economical importance of bioconverted products of keratinous wastes for different applications. Various researches have been studied about the source, disposal mechanisms, techniques of hydrolysis, potential use, and physical and chemical properties of keratin wastes. However, there is negligible information with regard to the use of keratin wastes as media supplements for the growth of keratinolytic microorganisms and silver retrieval from photographic and used X-ray films. Hence, this review differs from other similar reviews in the literature in that it discusses these neglected concerns.

Bioreactor level optimization of chromium(VI) reduction through Pseudomonas putida APRRJVITS11 and sustainable remediation of pathogenic DNA in water

Background

Bioremediation is one of the indispensable features of Pseudomonas putida. The use of Pseudomonas has been proved to be an effective treatment of tannery released chromium (VI). The current study is the first attempt for the optimization of chromate reduction by Pseudomonas putida strain APRRJVITS11 in an optimized bench-scale bioreactor with successful thermo-pressure elimination of the strain thereby eliminating the health risk caused by antibiotic resistant genes (ARGs).

Results

The growth media, modified with optimized 1.0% nitrogen, 0.5% yeast extract and 0.3% sodium, showed enhanced bacterial growth for 72 h of incubation. The optimization of aeration (1.0 vvm) and agitation (150 rpm) rates enhanced the chromate reduction by about 40% at 72 h fermentation. Thermo-pressure pathogenic DNA degradation was achieved at 90 °C and 5868 Pa for 10 min.

Conclusions

Successful chromium reduction and total elimination of ARGs from effluent. A two-step treatment train was proposed for chromium reduction in the environment, which should be incorporated by the existing leather industries running on conventional treatment units.

Graphical Abstract

Understanding the Basis of Occurrence, Biosynthesis, and Implications of Thermostable Alkaline Proteases

The group of hydrolytic enzymes synonymously known as proteases is predominantly most favored for the class of industrial enzymes. The present work focuses on the thermostable nature of these proteolytic enzymes that occur naturally among mesophilic and thermophilic microbes. The broad thermo-active feature (40-80 °C), ease of cultivation, maintenance, and bulk production are the key features associated with these enzymes. Detailing of contemporary production technologies, and controllable operational parameters including the purification strategies, are the key features that justify their industrial dominance as biocatalysts. In addition, the rigorous research inputs by protein engineering and enzyme immobilization studies add up to the thermo-catalytic features and application capabilities of these enzymes. The work summarizes key features of microbial proteases that make them numero-uno for laundry, biomaterials, waste management, food and feed, tannery, and medical as well as pharmaceutical industries. The quest for novel and/or designed and engineered thermostable protease from unexplored sources is highly stimulating and will address the ever-increasing industrial demands.

Optimization of protease production from Bacillus halodurans under solid state fermentation using agrowastes

Marine microbes are potential source for novel metabolites. They are efficient in producing these metabolites utilizing agrowastes. Protease is one of the enzymes which find wide industrial applications. In the present study, protease producing bacteria was isolated from marine sediments and the organism was identified as Bacillus halodurans. The organism was subjected to protease production under solid state fermentation (SSF) using different agrowastes as substrates. Among the substrates used, wheat bran yielded maximum quantity of protease. The fermentation process was carried out under different cultural conditions to optimize the parameters influencing the enzyme production. The results of the stain removal studies by the enzyme revealed the increased efficiency of the microbial enzyme than the commercial detergent.

Biological Control of Phytopathogenic Fungi by Kluyveromyces marxianus and Torulaspora delbrueckii Isolated from Iraqi Date Vinegar

Yeasts are distributed in all environments and have been reported as potential biocontrol agents against various phytopathogenic fungi. To investigate their enzymatic and biological activities, 32 yeasts were isolated from 15 date vinegar samples. Evaluation of the antagonistic activities of isolated yeasts against the plant pathogens Fusarium oxysporium, Sclerotinia sclerotiorum, and Macrophomina phaseolina indicated that there are two yeasts had the highest inhibitory effect against plant pathogens, these yeasts identified as Kluyveromyces marxianus and Torulaspora delbrueckii using traditional and molecular methods. These yeast isolates were tested for fungal cell wall degrading enzymes (in vitro), and results indicated that the yeasts had strong protease and amylase enzyme activity and moderate chitinase and cellulase enzyme activity. The antagonistic activities of each yeast were evaluated using a dual culture technique. The results showed that K. marxianus inhibited the mycelial growth of F. oxysporium, S. sclerotiorum, and M. phaseolina by 70.5, 57.5, and 75.5%, respectively, whereas T. delbrueckii inhibited mycelial growth of F. oxysporum, S. sclerotiorum, and M. phaseolina by 55.3%, 66.2%, and 31.11%, respectively. The biofilm production assay indicated that the tested yeast could form biofilms as a mechanism of antagonistic activity against phytopathogenic fungi.

Covalent Immobilization of Proteases on Polylactic Acid for Proteins Hydrolysis and Waste Biomass Protein Content Valorization

The recovery of the protein component and its transformation into protein hydrolysates, generally carried out chemically, gives great added value to waste biomasses. The production of protein hydrolysates through enzymatic catalysis would guarantee to lower the environmental impact of the process and raise product quality, due to the reproducible formation of low molecular weight peptides, with interesting and often unexplored biological activities. The immobilization of the enzymes represents a good choice in terms of stability, recyclability and reduction of costs. In this context, we covalently linked proteases from Aspergillus oryzae to polylactic acid an eco-friendly biopolymer. The hydrolytic efficiency of immobilized enzymes was assessed testing their stability to temperature and over time, and checking the hydrolysis of model biomasses (casein and bovine serum albumin). Soybean waste extracts were also used as proof of principle.

Biochemical Characterization and Functional Analysis of Heat Stable High Potential Protease of Bacillus amyloliquefaciens Strain HM48 from Soils of Dachigam National Park in Kashmir Himalaya

A novel temperature stable alkaline protease yielding bacteria was isolated from the soils of Dachigam National Park, which is known to be inhabited by a wide variety of endemic plant and animal species of Western Himalaya. This high-potential protease producing isolate was characterized and identified as Bacillus amyloliquefaciens strain HM48 by morphological, Gram’s staining and biochemical techniques followed by molecular characterization using 16S rRNA approach. The extracellular protease of B. amyloliquefaciens HM48 was purified by precipitating with ammonium sulfate (80%), followed by dialysis and Gel filtration chromatography increasing its purity by 5.8-fold. The SDS–PAGE analysis of the purified enzyme confirmed a molecular weight of about ≈25 kDa. The enzyme displayed exceptional activity in a broad temperature range (10–90 °C) at pH 8.0, retaining its maximum at 70 °C, being the highest reported for this proteolytic Bacillus sp., with K_M and V_max of 11.71 mg/mL and 357.14 µmol/mL/min, respectively. The enzyme exhibited remarkable activity and stability against various metal ions, surfactants, oxidizing agent (H₂O₂), organic solvents and displayed outstanding compatibility with widely used detergents. This protease showed effective wash performance by exemplifying complete blood and egg-yolk stains removal at 70 °C and efficiently disintegrated chicken feathers making it of vital importance for laundry purpose and waste management. For functional analysis, protease gene amplification of strain HM48 yielded a nucleotide sequence of about 700 bp, which, when checked against the available sequences in NCBI, displayed similarity with subtilisin-like serine protease of B. amyloliquefaciens. The structure of this protease and its highest-priority substrate β-casein was generated through protein modeling. These protein models were validated through futuristic algorithms following which protein–protein (protease from HM48 and β-casein) docking was performed. The interaction profile of these proteins in the docked state with each other was also generated, shedding light on their finer details. Such attributes make this thermally stable protease novel and suitable for high-temperature industrial and environmental applications.

A novel constructed carbonate-mineralized functional bacterial consortium for high-efficiency cadmium biomineralization

A stable, urease-producing consortium (UPC) was constructed for high-efficiency cadmium (Cd) ion mineralization via a short-term and efficient acclimation process (five acclimation transfers). 16S rRNA gene high-throughput sequencing and quantitative polymerase chain reaction (qPCR) analyses of the urease subunit C (ureC) gene suggested that the three functional genera, all belonging to the phylum Firmicutes, rapidly increased during the process and finally composed the UPC (70.22-75.41 % of Sporosarcina, 13.83-20.66 % of norank_f_Bacillaceae, and 5.91-13.69 % of unclassified_f_Bacillaceae). The UPC exhibited good adaptability to a wide range of environmental conditions (a pH range of 4.0-11.0, temperature range of 10-45 °C, and Cd concentration range of 0-200 mg L^-1). After 8 h of incubation, 92.87 % of Cd at an initial concentration of 100 mg L^-1 was mineralized by UPC, exhibiting a great improvement as compared to the first acclimated consortium (C-1). Furthermore, although the acclimated consortium had been successively transferred 21 times, the Cd biomineralization efficiency remained stable, and this was consistent with the observed stable microbial community structure. X-ray diffraction (XRD) spectra revealed that Cd was mineralized in a (Ca0.67, Cd0.33)CO₃ phase. This research obtained a promising microbial resource for the biomineralization of Cd or other hazardous heavy metal contaminants.

Microbial Keratinase: Next Generation Green Catalyst and Prospective Applications

The search for novel renewable products over synthetics hallmarked this decade and those of the recent past. Most economies that are prospecting on biodiversity for improved bio-economy favor renewable resources over synthetics for the potential opportunity they hold. However, this field is still nascent as the bulk of the available resources are non-renewable based. Microbial metabolites, emphasis on secondary metabolites, are viable alternatives; nonetheless, vast microbial resources remain under-exploited; thus, the need for a continuum in the search for new products or bio-modifying existing products for novel functions through an efficient approach. Environmental distress syndrome has been identified as a factor that influences the emergence of genetic diversity in prokaryotes. Still, the process of how the change comes about is poorly understood. The emergence of new traits may present a high prospect for the industrially viable organism. Microbial enzymes have prominence in the bio-economic space, and proteases account for about sixty percent of all enzyme market. Microbial keratinases are versatile proteases which are continuously gaining momentum in biotechnology owing to their effective bio-conversion of recalcitrant keratin-rich wastes and sustainable implementation of cleaner production. Keratinase-assisted biodegradation of keratinous materials has revitalized the prospects for the utilization of cost-effective agro-industrial wastes, as readily available substrates, for the production of high-value products including amino acids and bioactive peptides. This review presented an overview of keratin structural complexity, the potential mechanism of keratin biodegradation, and the environmental impact of keratinous wastes. Equally, it discussed microbial keratinase; vis-à-vis sources, production, and functional properties with considerable emphasis on the ecological implication of microbial producers and catalytic tendency improvement strategies. Keratinase applications and prospective high-end use, including animal hide processing, detergent formulation, cosmetics, livestock feed, and organic fertilizer production, were also articulated.

Production and characterization of psychrophilic α-amylase from a psychrophilic bacterium, Shewanella sp. ISTPL2

A psychrophilic and halophilic bacterial isolate, Shewanella sp. ISTPL2, procured from the pristine Pangong Lake, Ladakh, Jammu and Kashmir, India, was used for the production and characterization of the psychrophilic and alkalophilic α-amylase enzyme. The α-amylase is a critical enzyme that catalyses the hydrolysis of α-1,4-glycosidic bonds of starch molecules and is predominately utilized in biotechnological applications. The highest enzyme activity of partially purified extracellular α-amylase was 10,064.20 U/mL after 12 h of incubation in a shake flask at pH 6.9 and 10 °C. Moreover, the maximum intracellular α-amylase enzyme activity (259.62 U/mL) was also observed at 6 h of incubation. The extracellular α-amylase was refined to the homogeneity with the specific enzyme activity of 36,690.47 U/mg protein corresponding to 6.87-fold purification. The optimized pH and temperature for the α-amylase were found to be pH 8 and 4 °C, respectively, suggesting its stability at alkaline conditions and low or higher temperatures. The amylase activity was highly activated by Cu2+, Fe2+ and Ca2+, while inhibited by Cd2+, Co2+ and Na2+. As per our knowledge, the current study reports the highest activity of a psychrophilic α-amylase enzyme providing prominent biotechnological potential.

Use of Alcalase in the production of bioactive peptides: A review

This review aims to cover the uses of the commercially available protease Alcalase in the production of biologically active peptides since 2010. Immobilization of Alcalase has also been reviewed, as immobilization of the enzyme may improve the final reaction design enabling the use of more drastic conditions and the reuse of the biocatalyst. That way, this review presents the production, via Alcalase hydrolysis of different proteins, of peptides with antioxidant, angiotensin I-converting enzyme inhibitory, metal binding, antidiabetic, anti-inflammatory and antimicrobial activities (among other bioactivities) and peptides that improve the functional, sensory and nutritional properties of foods. Alcalase has proved to be among the most efficient proteases for this goal, using different protein sources, being especially interesting the use of the protein residues from food industry as feedstock, as this also solves nature pollution problems. Very interestingly, the bioactivities of the protein hydrolysates further improved when Alcalase is used in a combined way with other proteases both in a sequential way or in a simultaneous hydrolysis (something that could be related to the concept of combi-enzymes), as the combination of proteases with different selectivities and specificities enable the production of a larger amount of peptides and of a smaller size.

Kinetics, detergent compatibility and feather-degrading capability of alkaline protease from Bacillus subtilis AKAL7 and Exiguobacterium indicum AKAL11 produced with fermentation of organic municipal solid wastes

Alkaline proteases having activity and stability at alkaline pH possess a large variety of applications in many industries. Growing renewed interest urges the need to find a single alkaline protease with promising properties to be used in different industrial processes. Herein, alkaline proteases produced through fermentation of cheap and easily available organic municipal solid wastes by Bacillus subtilis AKAL7 and Exiguobacterium indicum AKAL11 were purified to investigate their kinetic and thermodynamic parameters, detergent compatibility, dehairing and feather-degrading capability. Sodium dodecyl sulfate polyacrylamide gel electrophoresis revealed that the purified protease from B. subtilis and E. indicum had molecular mass of ∼45 and 75 kDa, respectively. The protease from B. subtilis and E. indicum showed highest activity at 55 and 50 °C having low K _m 1.17 and 0.567 mg/mL and high V _max 416.67 and 333.33 µmole/min, respectively. The activation energy and temperature quotient of protease from B. subtilis and E. indicum were 26.52 and 65.75 kJ/mole, and 1.0004 and 1.0003 at 20-55 and 20-50 °C, respectively. Thermodynamics analysis revealed the formation of more ordered enzyme-substrate complexes along with spontenity of enzyme reaction. The protease from E. indicum exhibited better compatibility at higher concentration of detergents compared to that from B. subtilis. However, both proteases could retain more than 80% of the activity in the presence of 0.1% commercial laundry detergents. The purified protease from the both sources could degrade almost 90% of barbs and 40% of dry weight of the native feather and that from E. indicum could dehair cow skin. Results reported herein suggest that the alkaline protease from B. subtilis AKAL7 and E. indicum AKAL11 has biotechnological implications in detergent, leather and poultry feather processing industries.

Enhanced catalytic activity of Bacillus aryabhattai P1 protease by modulation with nanoactivator

In the developing area of modern nanobiotechnology, the research is being focused on enhancement of catalytic performance in terms of efficiency and stability of enzymes to fulfill the industrial demand. In the context of this interdisciplinary era, we isolated and identified alkaline protease producer Bacillus aryabhattai P1 by polyphasic approach and then followed one variable at a time approach to optimize protease production from P1. The modified components of fermentation medium (g/L) were wheat bran 10, soybean flour 10, yeast extract 5, NaCl 10, KH₂PO₄ 1, K₂HPO₄ 1 and MgSO₄·7H₂O 0.2 (pH 9). The optimum alkaline protease production from P1 was recorded 75 ± 3 U/mg at 35 °C and pH 9 after 96 h of fermentation period. Molecular weight of partially purified P1 alkaline protease was 26 KDa as revealed by SDS-PAGE. Calcium based nanoceramic material was prepared by wet chemical precipitation method and doped in native P1 protease for catalytic activity enhancement. Catalytic activity of modified P1 protease was attained by nanoactivator mediated modulation was more by 5.58 fold at pH 10 and 30 °C temperature. The nanoceramic material named as nanoactivator, with grain size of 40–60 nm was suitable to redesign the active site of P1 protease. Such types of modified proteases can be used in different nanobiotechnological applications.

Safety and quality of bacterially fermented functional foods and beverages: a mini review

Bacteria have been employed widely in the food and beverage industry, with evolving dimensions in recent years. Proteases derived from lactic acid bacteria (LAB) are useful in the production of fermented functional beverages and are of particular use in conditioning their shelf life, nutritional content, flavour, and texture quality, thus making fermented foods and beverages functional and therapeutic. This review focuses on bacteria, especially protease-producing LAB used in food processing, and their usefulness in the production of functional foods and beverages. A case study of oat beverages was briefly explored due to its popularity. The safety and quality importance of the food products were also considered with a few recommendations.