Collagen stabilization at atomic level: crystal structure of designed (GlyProPro)10foldon

Generation and characterization of a nanobody against the avian influenza virus H7 subtype

Avian influenza virus (AIV) H7N9 diseases have been recently reported, raising concerns about a potential pandemic. Thus, there is an urgent need for effective therapeutics for AIV H7N9 infections. Herein, camelid immunization and yeast two-hybrid techniques were used to identify potent neutralizing nanobodies (Nbs) targeting the H7 subtype hemagglutinin. First, we evaluated the binding specificity and hemagglutination inhibition activity of the screened Nbs against the H7 subtype hemagglutinin. Nb-Z77, with high hemagglutination inhibition activity was selected from the screened Nbs to optimize the yeast expression conditions and construct oligomeric forms of Nb-Z77 using various ligation methods. The oligomers Nb-Z77-DiGS, Nb-Z77-TriGS, Nb-Z77-Fc and Nb-Z77-Foldon were successfully constructed and expressed. Nb-Z77-DiGS and Nb-Z77-Foldon exhibited considerably greater activity than did Nb-Z77 against H7 subtype hemagglutinin, with median effective concentrations of 384.7 and 27.33 pM and binding affinity values of 213 and 5.21 pM, respectively. Nb-Z77-DiGS and Nb-Z77-Foldon completely inhibited the hemagglutination activity of the inactivated virus H7-Re1 at the lowest concentration of 0.938 μg/mL. This study screened a strain of Nb with high hemagglutination inhibition activity and enhanced its antiviral activity through oligomerization, which may have great potential for developing effective agents for the prevention, diagnosis, and treatment of AIV H7 subtype infection.

A recombinant technique for mapping functional sites of heterotrimeric collagen helices: Collagen IV CB3 fragment as a prototype for integrin binding

Collagen superfamily of proteins is a major component of the extracellular matrix. Defects in collagens underlie the cause of nearly 40 human genetic diseases in millions of people worldwide. Pathogenesis typically involves genetic alterations of the triple helix, a hallmark structural feature that bestows exceptional mechanical resistance to tensile forces and a capacity to bind a plethora of macromolecules. Yet, there is a paramount knowledge gap in understanding the functionality of distinct sites along the triple helix. Here, we present a recombinant technique to produce triple helical fragments for functional studies. The experimental strategy utilizes the unique capacity of the NC2 heterotrimerization domain of collagen IX to drive three α-chain selection and registering the triple helix stagger. For proof of principle, we produced and characterized long triple helical fragments of collagen IV that were expressed in a mammalian system. The heterotrimeric fragments encompassed the CB3 trimeric peptide of collagen IV, which harbors the binding motifs for α1β1 and α2β1 integrins. Fragments were characterized and shown to have a stable triple helix, post-translational modifications, and high affinity and specific binding of integrins. The NC2 technique is a universal tool for the high-yield production of heterotrimeric fragments of collagens. Fragments are suitable for mapping functional sites, determining coding sequences of binding sites, elucidating pathogenicity and pathogenic mechanisms of genetic mutations, and production of fragments for protein replacement therapy.

Design of Polypeptides Self-Assembling into Antifouling Coatings: Exploiting Multivalency

We propose to exploit multivalent binding of solid-binding peptides (SBPs) for the physical attachment of antifouling polypeptide brushes on solid surfaces. Using a silica-binding peptide as a model SBP, we find that both tandem-repeated SBPs and SBPs repeated in branched architectures implemented via a multimerization domain work very well to improve the binding strength of polypeptide brushes, as compared to earlier designs with a single SBP. At the same time, for many of the designed sequences, either the solubility or the yield of recombinant production is low. For a single design, with the domain structure B-M-E, both solubility and yield of recombinant production were high. In this design, B is a silica-binding peptide, M is a highly thermostable, de novo-designed trimerization domain, and E is a hydrophilic elastin-like polypeptide. We show that the B-M-E triblock polypeptide rapidly assembles into highly stable polypeptide brushes on silica surfaces, with excellent antifouling properties against high concentrations of serum albumin. Given that SBPs attaching to a wide range of materials have been identified, the B-M-E triblock design provides a template for the development of polypeptides for coating many other materials such as metals or plastics.

Combination of Polysaccharide Nanofibers Derived from Cellulose and Chitin Promotes the Adhesion, Migration and Proliferation of Mouse Fibroblast Cells

Extracellular matrix (ECM) as a structural and biochemical scaffold to surrounding cells plays significant roles in cell adhesion, migration, proliferation and differentiation. Herein, we show the novel combination of TEMPO-oxidized cellulose nanofiber (TOCNF) and surface-N-deacetylated chitin nanofiber (SDCtNF), respectively, having carboxylate and amine groups on each crystalline surface, for mouse fibroblast cell culture. The TOCNF/SDCtNF composite scaffolds demonstrated characteristic cellular behavior, strongly depending on the molar ratios of carboxylates and amines of polysaccharide NFs. Pure TOCNF substrate exhibited good cell attachment, although intact carboxylate-free CNF made no contribution to cell adhesion. By contrast, pure SDCtNF induced crucial cell aggregation to form spheroids; nevertheless, the combination of TOCNF and SDCtNF enhanced cell attachment and subsequent proliferation. Molecular blend of carboxymethylcellulose and acid-soluble chitosan made nearly no contribution to cell culture behavior. The wound healing assay revealed that the polysaccharide combination markedly promoted skin repair for wound healing. Both of TOCNF and SDCtNF possessed rigid nanofiber nanoarchitectures with native crystalline forms and regularly-repeated functional groups, of which such structural characteristics would provide a potential for developing cell culture scaffolds having ECM functions, possibly promoting good cellular adhesion, migration and growth in the designated cellular microenvironments.

The Future of Protein Secondary Structure Prediction Was Invented by Oleg Ptitsyn

When Oleg Ptitsyn and his group published the first secondary structure prediction for a protein sequence, they started a research field that is still active today. Oleg Ptitsyn combined fundamental rules of physics with human understanding of protein structures. Most followers in this field, however, use machine learning methods and aim at the highest (average) percentage correctly predicted residues in a set of proteins that were not used to train the prediction method. We show that one single method is unlikely to predict the secondary structure of all protein sequences, with the exception, perhaps, of future deep learning methods based on very large neural networks, and we suggest that some concepts pioneered by Oleg Ptitsyn and his group in the 70s of the previous century likely are today’s best way forward in the protein secondary structure prediction field.

Light-Activated Peptide-Based Materials for Sutureless Wound Closure

Using chemically modified extracellular matrix proteins, such as collagen, in combination with light for tissue bonding reduces inflammation and minimizes scarring. However, full length animal or recombinant human collagen proteins are difficult to isolate/produce. Thus, short biomimetic collagen peptides with properties equivalent to collagen at both structural and functional levels may be ideal building blocks for the development of remotely triggered adhesives and fillers. In this work, the conjugation of self-assembling collagen-like peptides to acrylate functionalized polyethylene glycol units yielded adhesive filler materials activated by visible light through the incorporation of a photosensitizer. When tested in a murine skin wound model, the photoactivated adhesives showed reduced scar formation and promoted epithelial regeneration.

Stabilization of the triple helix in collagen mimicking peptides

Collagen mimics are peptides designed to reproduce structural features of natural collagen. A triple helix is the first element in the hierarchy of collagen folding. It is an assembly of three parallel peptide chains stabilized by packing and interchain hydrogen bonds. In this review we summarize the existing chemical approaches towards stabilization of this structure including the most recent developments. Currently proposed methods include manipulation of the amino acid composition, application of unnatural amino acid analogues, stimuli-responsive modifications, chain tethering approaches, peptide amphiphiles, modifications that target interchain interactions and more. This ability to manipulate the triple helix as a supramolecular self-assembly contributes to our understanding of the collagen folding. It also provides essential information needed to design collagen-based biomaterials of the future.

Derivatives of the lectin complement pathway in Lophotrochozoa

A plethora of non-overlapping immune molecular mechanisms in metazoans is the most puzzling issue in comparative immunobiology. No valid evolutionary retrospective on these mechanisms has been developed. In this study, we aimed to reveal the origin and evolution of the immune complement-like system in Lophotrochozoa. For this, we analyzed publicly available transcriptomes of prebilaterian and lophotrochozoan species, mapping lineage-specific molecular events on the phylogenetic tree. We found that there were no orthologs of mannose-binding lectin (MBL) and ficolins (FCN) in Lophotrochozoa but C1q-like proteins (C1qL), bearing both a collagen domain and a globular C1q domain, were omnipresent in them. This suggests that among all complement-like activators the C1qL-specific domain architecture was an evolutionarily first. Two novel protostomian MASP-Related Molecules, MReM1 and MReM2, might hypothetically compensate for the loss of a prebilaterian MASP-orthologous gene and act in complex with C1qL and C1qDC as a "proto-activator" of an ancient "proto-complement". We proposed a new model of the complement evolution predicting that numerous lineage-specific complement-like systems should have evolved from a stem "antique" molecular complex. First evolved in the common ancestor of coelomic animals, the "antique" humoral complex consisted of a TEP molecule, the common ancestor of TEP-associated proteases (C2/Bf/Сf/Lf), the common ancestor of MASP-like proteases (MASP/C1r/C1s, MReM1/MReM2) and multimeric recognition proteins (C1q-, MBL- and FCN-homologs). Further evolutionary specialization and expansion of the complex was independent and lineage-specific, examples being the mammalian complement system and the Apogastropoda complement-like complex. The latter includes an impressive array of multimeric recognition proteins, the variable immunoglobulin and lectin domain containing molecules (VIgL), homologous to C1q, MBL, FCN and other lectins. Four novel polymorphic subfamilies of VIgLs were found to be expressed in Apogastropoda: C1q-related proteins (QREP), zona pellucida-related proteins (ZREP), Scavenger Receptor Cys-Rich-related proteins (SREP) and HPA-lectin related proteins (HREP). The transcriptional response of fibrinogen-related proteins of VIgL family (LlFREP), LlQREP and LlSREP to infestation of common periwinkle, Littorina littorea, with digenean parasite Himasthla elongata correlates with that of LlMReM1, supporting the model suggested in this study.

Directed Self-Assembly of Trimeric DNA-Bindingchiral Miniprotein Helicates

We propose that peptides are highly versatile platforms for the precise design of supramolecular metal architectures, and particularly, for the controlled assembly of helicates. In this context, we show that the bacteriophage T4 Fibritin foldon (T4Ff) can been engineered on its N-terminus with metal-chelating 2,2'-bipyridine units that stereoselectively assemble in the presence of Fe(II) into parallel, three-stranded peptide helicates with preferred helical orientation. Modeling studies support the proposed self-assembly and the stability of the final helicate. Furthermore, we show that these designed mini-metalloproteins selectively recognize three-way DNA junctions over double-stranded DNA.

NadA3 Structures Reveal Undecad Coiled Coils and LOX1 Binding Regions Competed by Meningococcus B Vaccine-Elicited Human Antibodies

Neisseria meningitidis serogroup B (MenB) is a major cause of sepsis and invasive meningococcal disease. A multicomponent vaccine, 4CMenB, is approved for protection against MenB. Neisserial adhesin A (NadA) is one of the main vaccine antigens, acts in host cell adhesion, and may influence colonization and invasion. Six major genetic variants of NadA exist and can be classified into immunologically distinct groups I and II. Knowledge of the crystal structure of the 4CMenB vaccine component NadA3 (group I) would improve understanding of its immunogenicity, folding, and functional properties and might aid antigen design. Here, X-ray crystallography, biochemical, and cellular studies were used to deeply characterize NadA3. The NadA3 crystal structure is reported; it revealed two unexpected regions of undecad coiled-coil motifs and other conformational differences from NadA5 (group II) not predicted by previous analyses. Structure-guided engineering was performed to increase NadA3 thermostability, and a second crystal structure confirmed the improved packing. Functional NadA3 residues mediating interactions with human receptor LOX-1 were identified. Also, for two protective vaccine-elicited human monoclonal antibodies (5D11, 12H11), we mapped key NadA3 epitopes. These vaccine-elicited human MAbs competed binding of NadA3 to LOX-1, suggesting their potential to inhibit host-pathogen colonizing interactions. The data presented provide a significant advance in the understanding of the structure, immunogenicity and function of NadA, one of the main antigens of the multicomponent meningococcus B vaccine.IMPORTANCE The bacterial microbe Neisseria meningitidis serogroup B (MenB) is a major cause of devastating meningococcal disease. An approved multicomponent vaccine, 4CMenB, protects against MenB. Neisserial adhesin A (NadA) is a key vaccine antigen and acts in host cell-pathogen interactions. We investigated the 4CMenB vaccine component NadA3 in order to improve the understanding of its immunogenicity, structure, and function and to aid antigen design. We report crystal structures of NadA3, revealing unexpected structural motifs, and other conformational differences from the NadA5 orthologue studied previously. We performed structure-based antigen design to engineer increased NadA3 thermostability. Functional NadA3 residues mediating interactions with the human receptor LOX-1 and vaccine-elicited human antibodies were identified. These antibodies competed binding of NadA3 to LOX-1, suggesting their potential to inhibit host-pathogen colonizing interactions. Our data provide a significant advance in the overall understanding of the 4CMenB vaccine antigen NadA.

Enhanced Purification Efficiency and Thermal Tolerance of Thermoanaerobacterium aotearoense β-Xylosidase through Aggregation Triggered by Short Peptides

To simplify purification and improve heat tolerance of a thermostable β-xylosidase (ThXylC), a short ELK16 peptide was attached to its C-terminus, which is designated as ThXylC-ELK. Wild-type ThXylC was normally expressed in soluble form. However, ThXylC-ELK assembled into aggregates with 98.6% of total β-xylosidase activity. After simple centrifugation and buffer washing, the ThXylC-ELK particles were collected with 92.57% activity recovery and 95% purity, respectively. Meanwhile, the wild-type ThXylC recovery yield was less than 55% after heat inactivation, affinity and desalting chromatography followed by HRV 3C protease cleavage purification. Catalytic efficiency ( K_cat/ K_m) was increased from 21.31 mM^-1 s^-1 for ThXylC to 32.19 mM^-1 s^-1 for ThXylC-ELK accompanied by a small increase in K_m value. Heat tolerance of ThXylC-ELK at high temperatures was also increased. The ELK16 peptide attachment resulted in 6.2-fold increase of half-life at 65 °C. Released reducing sugars were raised 1.3-fold during sugar cane bagasse hydrolysis when ThXylC-ELK was supplemented into the combination of XynAΔSLH and Cellic CTec2.

Rose Bengal Binding to Collagen and Tissue Photobonding

We investigated two critical aspects of rose Bengal (RB) photosensitized protein cross-linking that may underlie recently developed medical applications. Our studies focused on the binding of RB to collagen by physical interaction and the effect of this binding and certain amino acids on RB photochemistry. Molecular dynamics simulations and free-energy calculation techniques, complemented with isothermal titration calorimetry, provided insight into the binding between RB and a collagen-like peptide (CLP) at the atomic level. Electrostatic interactions dominated, which is consistent with the finding that RB bound equally well to triple helical and single chain collagen. The binding free energy ranged from -5.7 to -3 kcal/mol and was strongest near the positively charged amino groups at the N-terminus and on lysine side chains. At high RB concentration, a maximum of 16 ± 3 bound dye molecules per peptide was found, which is consistent with spectroscopic evidence for aggregated RB bound to collagen or the CLP. Within a tissue-mimetic collagen matrix, RB photobleached rapidly, probably due to electron transfer to certain protein amino acids, as was demonstrated in solutions of free RB and arginine. In the presence of arginine and low oxygen concentrations, a product absorbing at 510 nm formed, presumably due to dehalogenation after electron transfer to RB. In the collagen matrix without arginine, the dye generated singlet oxygen as well as the 510 nm product. These results provide the first evidence of the effects of a tissue-like environment on the photochemical mechanisms of rose Bengal.

Oligomerization triggered by foldon: a simple method to enhance the catalytic efficiency of lichenase and xylanase

BACKGROUND

Effective and simple methods that lead to higher enzymatic efficiencies are highly sough. Here we proposed a foldon-triggered trimerization of the target enzymes with significantly improved catalytic performances by fusing a foldon domain at the C-terminus of the enzymes via elastin-like polypeptides (ELPs). The foldon domain comprises 27 residues and can forms trimers with high stability.

RESULTS

Lichenase and xylanase can hydrolyze lichenan and xylan to produce value added products and biofuels, and they have great potentials as biotechnological tools in various industrial applications. We took them as the examples and compared the kinetic parameters of the engineered trimeric enzymes to those of the monomeric and wild type ones. When compared with the monomeric ones, the catalytic efficiency (k _cat /K _m ) of the trimeric lichenase and xylanase increased 4.2- and 3.9- fold. The catalytic constant (k _cat ) of the trimeric lichenase and xylanase increased 1.8- fold and 5.0- fold than their corresponding wild-type counterparts. Also, the specific activities of trimeric lichenase and xylanase increased by 149% and 94% than those of the monomeric ones. Besides, the recovery of the lichenase and xylanase activities increased by 12.4% and 6.1% during the purification process using ELPs as the non-chromatographic tag. The possible reason is the foldon domain can reduce the transition temperature of the ELPs.

CONCLUSION

The trimeric lichenase and xylanase induced by foldon have advantages in the catalytic performances. Besides, they were easier to purify with increased purification fold and decreased the loss of activities compared to their corresponding monomeric ones. Trimerizing of the target enzymes triggered by the foldon domain could improve their activities and facilitate the purification, which represents a simple and effective enzyme-engineering tool. It should have exciting potentials both in industrial and laboratory scales.

Structural insight for chain selection and stagger control in collagen

Collagen plays a fundamental role in all known metazoans. In collagens three polypeptides form a unique triple-helical structure with a one-residue stagger to fit every third glycine residue in the inner core without disturbing the poly-proline type II helical conformation of each chain. There are homo- and hetero-trimeric types of collagen consisting of one, two or three distinct chains. Thus there must be mechanisms that control composition and stagger during collagen folding. Here, we uncover the structural basis for both chain selection and stagger formation of a collagen molecule. Three distinct chains (α1, α2 and α3) of the non-collagenous domain 2 (NC2) of type IX collagen are assembled to guide triple-helical sequences in the leading, middle and trailing positions. This unique domain opens the door for generating any fragment of collagen in its native composition and stagger.

Biology of Hsp47 (Serpin H1), a collagen-specific molecular chaperone

Hsp47, a collagen-specific molecular chaperone that localizes in the endoplasmic reticulum (ER), is indispensable for molecular maturation of collagen. Hsp47, which is encoded by the SERPINH1 gene, belongs to the serpin family and has the serpin fold; however, it has no serine protease inhibitory activity. Hsp47 transiently binds to procollagen in the ER, dissociates in the cis-Golgi or ER-Golgi intermediate compartment (ERGIC) in a pH-dependent manner, and is then transported back to the ER via its RDEL retention sequence. Hsp47 recognizes collagenous (Gly-Xaa-Arg) repeats on triple-helical procollagen and can prevent local unfolding and/or aggregate formation of procollagen. Gene disruption of Hsp47 in mice causes embryonic lethality due to impairments in basement membrane and collagen fibril formation. In Hsp47-knockout cells, the type I collagen triple helix forms abnormally, resulting in thin and frequently branched fibrils. Secretion of type I collagens is slow and plausible in making aggregates of procollagens in the ER of hsp47-knocked out fibroblasts, which are ultimately degraded by autophagy. Mutations in Hsp47 are causally associated with osteogenesis imperfecta. Expression of Hsp47 is strongly correlated with expression of collagens in multiple types of cells and tissues. Therefore, Hsp47 represents a promising target for treatment of collagen-related disorders, including fibrosis of the liver, lung, and other organs.

Metal Stabilization of Collagen and de Novo Designed Mimetic Peptides

We explore the design of metal binding sites to modulate triple-helix stability of collagen and collagen-mimetic peptides. Globular proteins commonly utilize metals to connect tertiary structural elements that are well separated in sequence, constraining structure and enhancing stability. It is more challenging to engineer structural metals into fibrous protein scaffolds, which lack the extensive tertiary contacts seen in globular proteins. In the collagen triple helix, the structural adjacency of the carboxy-termini of the three chains makes this region an attractive target for introducing metal binding sites. We engineered His3 sites based on structural modeling constraints into a series of designed homotrimeric and heterotrimeric peptides, assessing the capacity of metal binding to improve stability and in the case of heterotrimers, affect specificity of assembly. Notable enhancements in stability for both homo- and heteromeric systems were observed upon addition of zinc(II) and several other metal ions only when all three histidine ligands were present. Metal binding affinities were consistent with the expected Irving-Williams series for imidazole. Unlike other metals tested, copper(II) also bound to peptides lacking histidine ligands. Acetylation of the peptide N-termini prevented copper binding, indicating proline backbone amide metal-coordination at this site. Copper similarly stabilized animal extracted Type I collagen in a metal-specific fashion, highlighting the potential importance of metal homeostasis within the extracellular matrix.

The self-assembly of a mini-fibril with axial periodicity from a designed collagen-mimetic triple helix

In this work we describe the self-assembly of a collagen-like periodic mini-fibril from a recombinant triple helix. The triple helix, designated Col108, is expressed in Escherichia coli using an artificial gene and consists of a 378-residue triple helix domain organized into three pseudo-repeating sequence units. The peptide forms a stable triple helix with a melting temperature of 41 °C. Upon increases of pH and temperature, Col108 self-assembles in solution into smooth mini-fibrils with the cross-striated banding pattern typical of fibrillar collagens. The banding pattern is characterized by an axially repeating feature of ∼35 nm as observed by transmission electron microscopy and atomic force microscopy. Both the negatively stained and the positively stained transmission electron microscopy patterns of the Col108 mini-fibrils are consistent with a staggered arrangement of triple helices having a staggering value of 123 residues, a value closely connected to the size of one repeat sequence unit. A mechanism is proposed for the mini-fibril formation of Col108 in which the axial periodicity is instigated by the built-in sequence periodicity and stabilized by the optimized interactions between the triple helices in a 1-unit staggered arrangement. Lacking hydroxyproline residues and telopeptides, two factors implicated in the fibrillogenesis of native collagen, the Col108 mini-fibrils demonstrate that sequence features of the triple helical domain alone are sufficient to "code" for axially repeating periodicity of fibrils. To our knowledge, Col108 is the first designed triple helix to self-assemble into periodic fibrils and offers a unique opportunity to unravel the specific molecular interactions of collagen fibrillogenesis.

Type II collagen antibody response is enriched in the synovial fluid of rheumatoid joints and directed to the same major epitopes as in collagen induced arthritis in primates and mice

Introduction

Antibodies towards type II collagen (CII) are detected in patients with rheumatoid arthritis (RA) and in non-human primates and rodents with collagen induced arthritis (CIA). We have previously shown that antibodies specific for several CII-epitopes are pathogenic using monoclonal antibodies from arthritic mice, although the role of different anti-CII epitopes has not been investigated in detail in other species. We therefore performed an inter-species comparative study of the autoantibody response to CII in patients with RA versus monkeys and mice with CIA.

Methods

Analysis of the full epitope repertoire along the disease course of CIA was performed using a library of CII triple-helical peptides. The antibody responses to the major CII epitopes were analyzed in sera and synovial fluid from RA patients, and in sera from rhesus monkeys (Macaca mulatta), common marmosets (Callithrix jacchus) and mice.

Results

Many CII epitopes including the major C1, U1, and J1 were associated with established CIA and arginine residues played an important role in the anti-CII antibody interactions. The major epitopes were also recognized in RA patients, both in sera and even more pronounced in synovial fluid: 77% of the patients had antibodies to the U1 epitope. The anti-CII immune response was not restricted to the anti-citrulline protein antibodies (ACPA) positive RA group.

Conclusion

CII conformational dependent antibody responses are common in RA and are likely to originate from rheumatoid joints but did not show a correlation with ACPA response. Importantly, the fine specificity of the anti-CII response is similar with CIA in monkeys and rodents where the recognized epitopes are conserved and have a major pathogenic role. Thus, anti-CII antibodies may both contribute to, as well as be the consequence of, local joint inflammation.

Collagen XXII binds to collagen-binding integrins via the novel motifs GLQGER and GFKGER

Cell attachment to collagens is mediated by integrins. In the present study, we define two new integrin-binding motifs, GLQGER and GFKGER, within the collagen XXII triple helical domain. Mutation of the two motifs in collagen XXII abolishes the binding to HaCaT cells completely.

The crystal structure of the streptococcal collagen-like protein 2 globular domain from invasive M3-type group A Streptococcus shows significant similarity to immunomodulatory HIV protein gp41

The arsenal of virulence factors deployed by streptococci includes streptococcal collagen-like (Scl) proteins. These proteins, which are characterized by a globular domain and a collagen-like domain, play key roles in host adhesion, host immune defense evasion, and biofilm formation. In this work, we demonstrate that the Scl2.3 protein is expressed on the surface of invasive M3-type strain MGAS315 of Streptococcus pyogenes. We report the crystal structure of Scl2.3 globular domain, the first of any Scl. This structure shows a novel fold among collagen trimerization domains of either bacterial or human origin. Despite there being low sequence identity, we observed that Scl2.3 globular domain structurally resembles the gp41 subunit of the envelope glycoprotein from human immunodeficiency virus type 1, an essential subunit for viral fusion to human T cells. We combined crystallographic data with modeling and molecular dynamics techniques to gather information on the entire lollipop-like Scl2.3 structure. Molecular dynamics data evidence a high flexibility of Scl2.3 with remarkable interdomain motions that are likely instrumental to the protein biological function in mediating adhesive or immune-modulatory functions in host-pathogen interactions. Altogether, our results provide molecular tools for the understanding of Scl-mediated streptococcal pathogenesis and important structural insights for the future design of small molecular inhibitors of streptococcal invasion.

Utilizing avidity to improve antifreeze protein activity: a type III antifreeze protein trimer exhibits increased thermal hysteresis activity

Antifreeze proteins (AFPs) are ice growth inhibitors that allow the survival of several species living at temperatures colder than the freezing point of their bodily fluids. AFP activity is commonly defined in terms of thermal hysteresis, which is the difference observed for the solution freezing and melting temperatures. Increasing the thermal hysteresis activity of these proteins, particularly at low concentrations, is of great interest because of their wide range of potential applications. In this study, we have designed and expressed one-, two-, and three-domain antifreeze proteins to improve thermal hysteresis activity through increased binding avidity. The three-domain type III AFP yielded significantly greater activity than the one- and two-domain proteins, reaching a thermal hysteresis of >1.6 °C at a concentration of <1 mM. To elucidate the basis of this increase, the data were fit to a multidomain protein adsorption model based on the classical Langmuir isotherm. Fits of the data to the modified isotherms yield values for the equilibrium binding constants for the adsorption of AFP to ice and indicate that protein surface coverage is proportional to thermal hysteresis activity.

Structure-based design of a fusion glycoprotein vaccine for respiratory syncytial virus

Respiratory syncytial virus (RSV) is the leading cause of hospitalization for children under 5 years of age. We sought to engineer a viral antigen that provides greater protection than currently available vaccines and focused on antigenic site Ø, a metastable site specific to the prefusion state of the RSV fusion (F) glycoprotein, as this site is targeted by extremely potent RSV-neutralizing antibodies. Structure-based design yielded stabilized versions of RSV F that maintained antigenic site Ø when exposed to extremes of pH, osmolality, and temperature. Six RSV F crystal structures provided atomic-level data on how introduced cysteine residues and filled hydrophobic cavities improved stability. Immunization with site Ø-stabilized variants of RSV F in mice and macaques elicited levels of RSV-specific neutralizing activity many times the protective threshold.

The tip of the tail needle affects the rate of DNA delivery by bacteriophage P22

The P22-like bacteriophages have short tails. Their virions bind to their polysaccharide receptors through six trimeric tailspike proteins that surround the tail tip. These short tails also have a trimeric needle protein that extends beyond the tailspikes from the center of the tail tip, in a position that suggests that it should make first contact with the host’s outer membrane during the infection process. The base of the needle serves as a plug that keeps the DNA in the virion, but role of the needle during adsorption and DNA injection is not well understood. Among the P22-like phages are needle types with two completely different C-terminal distal tip domains. In the phage Sf6-type needle, unlike the other P22-type needle, the distal tip folds into a “knob” with a TNF-like fold, similar to the fiber knobs of bacteriophage PRD1 and Adenovirus. The phage HS1 knob is very similar to that of Sf6, and we report here its crystal structure which, like the Sf6 knob, contains three bound L-glutamate molecules. A chimeric P22 phage with a tail needle that contains the HS1 terminal knob efficiently infects the P22 host, Salmonella enterica, suggesting the knob does not confer host specificity. Likewise, mutations that should abrogate the binding of L-glutamate to the needle do not appear to affect virion function, but several different other genetic changes to the tip of the needle slow down potassium release from the host during infection. These findings suggest that the needle plays a role in phage P22 DNA delivery by controlling the kinetics of DNA ejection into the host.

Unusual biophysics of intrinsically disordered proteins

Research of a past decade and a half leaves no doubt that complete understanding of protein functionality requires close consideration of the fact that many functional proteins do not have well-folded structures. These intrinsically disordered proteins (IDPs) and proteins with intrinsically disordered protein regions (IDPRs) are highly abundant in nature and play a number of crucial roles in a living cell. Their functions, which are typically associated with a wide range of intermolecular interactions where IDPs possess remarkable binding promiscuity, complement functional repertoire of ordered proteins. All this requires a close attention to the peculiarities of biophysics of these proteins. In this review, some key biophysical features of IDPs are covered. In addition to the peculiar sequence characteristics of IDPs these biophysical features include sequential, structural, and spatiotemporal heterogeneity of IDPs; their rough and relatively flat energy landscapes; their ability to undergo both induced folding and induced unfolding; the ability to interact specifically with structurally unrelated partners; the ability to gain different structures at binding to different partners; and the ability to keep essential amount of disorder even in the bound form. IDPs are also characterized by the "turned-out" response to the changes in their environment, where they gain some structure under conditions resulting in denaturation or even unfolding of ordered proteins. It is proposed that the heterogeneous spatiotemporal structure of IDPs/IDPRs can be described as a set of foldons, inducible foldons, semi-foldons, non-foldons, and unfoldons. They may lose their function when folded, and activation of some IDPs is associated with the awaking of the dormant disorder. It is possible that IDPs represent the "edge of chaos" systems which operate in a region between order and complete randomness or chaos, where the complexity is maximal. This article is part of a Special Issue entitled: The emerging dynamic view of proteins: Protein plasticity in allostery, evolution and self-assembly.

Multiplexed single-molecule force proteolysis measurements using magnetic tweezers

The generation and detection of mechanical forces is a ubiquitous aspect of cell physiology, with direct relevance to cancer metastasis(1), atherogenesis(2) and wound healing(3). In each of these examples, cells both exert force on their surroundings and simultaneously enzymatically remodel the extracellular matrix (ECM). The effect of forces on ECM has thus become an area of considerable interest due to its likely biological and medical importance(4-7). Single molecule techniques such as optical trapping(8), atomic force microscopy(9), and magnetic tweezers(10,11) allow researchers to probe the function of enzymes at a molecular level by exerting forces on individual proteins. Of these techniques, magnetic tweezers (MT) are notable for their low cost and high throughput. MT exert forces in the range of ~1-100 pN and can provide millisecond temporal resolution, qualities that are well matched to the study of enzyme mechanism at the single-molecule level(12). Here we report a highly parallelizable MT assay to study the effect of force on the proteolysis of single protein molecules. We present the specific example of the proteolysis of a trimeric collagen peptide by matrix metalloproteinase 1 (MMP-1); however, this assay can be easily adapted to study other substrates and proteases.

Direct in vitro and in vivo evidence for interaction between Hsp47 protein and collagen triple helix

Hsp47 (heat shock protein 47), a collagen-specific molecular chaperone, is essential for the maturation of various types of procollagens. Previous studies have suggested that Hsp47 may preferentially recognize the triple-helix form of procollagen rather than unfolded procollagen chains in the endoplasmic reticulum. However, the underlying mechanism has remained unclear because of limitations in the available methods for detecting in vitro and in vivo interactions between Hsp47 and collagen. In this study, we established novel methods for this purpose by adopting a time-resolved FRET technique in vitro and a bimolecular fluorescence complementation technique in vivo. Using these methods, we provide direct evidence that Hsp47 binds to collagen triple helices but not to the monomer form in vitro. We also demonstrate that Hsp47 binds a collagen model peptide in the trimer conformation in vivo. Hsp47 did not bind collagen peptides that had been modified to block their ability to form triple helices in vivo. These results conclusively indicate that Hsp47 recognizes the triple-helix form of procollagen in vitro and in vivo.

Collagen Mimetic Peptides: Progress Towards Functional Applications

Traditionally, collagen mimetic peptides (CMPs) have been used for elucidating the structure of the collagen triple helix and the factors responsible for its stabilization. The wealth of fundamental knowledge on collagen structure and cell-extracellular matrix (ECM) interactions accumulated over the past decades has led to a recent burst of research exploring the potential of CMPs to recreate the higher order assembly and biological function of natural collagens for biomedical applications. Although a large portion of such research is still at an early stage, the collagen triple helix has become a promising structural motif for engineering self-assembled, hierarchical constructs similar to natural tissue scaffolds which are expected to exhibit unique or enhanced biological activities. This paper reviews recent progress in the field of collagen mimetic peptides that bears both direct and indirect implications to engineering collagen-like materials for potential biomedical use. Various CMPs and collagen-like proteins that mimic either structural or functional characteristics of natural collagens are discussed with particular emphasis on providing helpful information to bioengineers and biomaterials scientists interested in collagen engineering.

Mechanical load induces a 100-fold increase in the rate of collagen proteolysis by MMP-1

Although mechanical stress is known to profoundly influence the composition and structure of the extracellular matrix (ECM), the mechanisms by which this regulation occurs remain poorly understood. We used a single-molecule magnetic tweezers assay to study the effect of force on collagen proteolysis by matrix metalloproteinase-1 (MMP-1). Here we show that the application of ∼10 pN in extensional force causes an ∼100-fold increase in proteolysis rates. Our results support a mechanistic model in which the collagen triple helix unwinds prior to proteolysis. The data and resulting model predict that biologically relevant forces may increase localized ECM proteolysis, suggesting a possible role for mechanical force in the regulation of ECM remodeling.

Structural characterization of a beta-turn mimic within a protein-protein interface

β-Turns are secondary structure elements not only exposed on protein surfaces, but also frequently found to be buried in protein-protein interfaces. Protein engineering so far considered mainly the backbone-constraining properties of synthetic β-turn mimics as parts of surface-exposed loops. A β-turn mimic, Hot═Tap, that is available in gram amounts, provides two hydroxyl groups that enhance its turn-inducing properties besides being able to form side-chain-like interactions. NMR studies on cyclic hexapeptides harboring the Hot═Tap dipeptide proved its strong β-turn-inducing capability. Crystallographic analyses of the trimeric fibritin-foldon/Hot═Tap hybrid reveal at atomic resolution how Hot═Tap replaces a βI'-turn by a βII'-type structure. Furthermore, Hot═Tap adapts to the complex protein environment by participating in several direct and water-bridged interactions across the foldon trimer interface. As building blocks, β-turn mimics capable of both backbone and side-chain mimicry may simplify the design of synthetic proteins.

[The beta-helical domain of bacteriophage T4 controls the folding of the fragment of long tail fibers in a chimeric protein]

The key stage of the infection of the Escherichia coli cell with bacteriophage T4, the binding to the surface of the host cell, is determined by the specificity of the long tail fiber proteins of the phage, in particular, gp37. The assembly and oligomerization of this protein under natural conditions requires the participation of at least two additional protein factors, gp57A and gp38, which strongly hinders the production of the recombinant form of gp37. To overcome this problem, a modern protein engineering strategy was used, which involves the construction of a chimeric protein containing a carrier protein that drives the correct folding of the target protein. For this purpose, the trimeric beta-helical domain of another protein of phage T4, gp5, was used. It was shown that this domain, represented as a rigid trimeric polypeptide prism, has properties favorable for use as a protein carrier. A fragment of protein gp37 containing five pentapeptides repeats, Gly-X-His-X-His, which determine the binding to the receptors on the bacterial cell surface, was fused in a continuous reading frame to the C-terminus of the domain of gp5. The resulting chimeric protein forms a trimer that has the native conformation of gp37 and exhibits biological activity.

Stable modification of poly(lactic acid) surface with neurite outgrowth-promoting peptides via hydrophobic collagen-like sequence

Surface modification of poly(dl-lactic acid) (PLA) scaffolds has been performed using a biofunctional small peptide composed of collagen-like repetitive sequence and laminin-derived sequence (AG73-G(3)-(PPG)(5)) via hydrophobic interaction. The results of surface analysis suggest that AG73-G(3)-(PPG)(5) can be stably adsorbed onto PLA films via hydrophobic interaction at the (PPG)(5) region, and form an extracellular matrix-like layer composed of both structural and biosignalling sequences. In addition, neurite outgrowth of PC12 cells was observed on the AG73-G(3)-(PPG)(5)-adsorbed PLA film. These results indicate that AG73-G(3)-(PPG)(5) very effectively enhances neurite outgrowth activity on PLA films. The hydrophobic adsorption of collagen-like peptide bound to biosignalling molecules may be widely applied as a surface modifier of PLA films for tissue engineering.

Crystal structure of human collagen XVIII trimerization domain: A novel collagen trimerization Fold

Collagens contain a unique triple-helical structure with a repeating sequence -G-X-Y-, where proline and hydroxyproline are major constituents in X and Y positions, respectively. Folding of the collagen triple helix requires trimerization domains. Once trimerized, collagen chains are correctly aligned and the folding of the triple helix proceeds in a zipper-like fashion. Here we report the isolation, characterization, and crystal structure of the trimerization domain of human type XVIII collagen, a member of the multiplexin family. This domain differs from all other known trimerization domains in other collagens and exhibits a high trimerization potential at picomolar concentrations. Strong chain association and high specificity of binding are needed for multiplexins, which are present at very low levels.

Structure and pathogenicity of antibodies specific for citrullinated collagen type II in experimental arthritis

Antibodies to citrulline-modified proteins have a high diagnostic value in rheumatoid arthritis (RA). However, their biological role in disease development is still unclear. To obtain insight into this question, a panel of mouse monoclonal antibodies was generated against a major triple helical collagen type II (CII) epitope (position 359-369; ARGLTGRPGDA) with or without arginines modified by citrullination. These antibodies bind cartilage and synovial tissue, and mediate arthritis in mice. Detection of citrullinated CII from RA patients' synovial fluid demonstrates that cartilage-derived CII is indeed citrullinated in vivo. The structure determination of a Fab fragment of one of these antibodies in complex with a citrullinated peptide showed a surprising beta-turn conformation of the peptide and provided information on citrulline recognition. Based on these findings, we propose that autoimmunity to CII, leading to the production of antibodies specific for both native and citrullinated CII, is an important pathogenic factor in the development of RA.

Crystal structure of human type III collagen Gly991-Gly1032 cystine knot-containing peptide shows both 7/2 and 10/3 triple helical symmetries

Type III collagen is a critical collagen that comprises extensible connective tissue such as skin, lung, and the vascular system. Mutations in the type III collagen gene, COL3A1, are associated with the most severe forms of Ehlers-Danlos syndrome. A characteristic feature of type III collagen is the presence of a stabilizing C-terminal cystine knot. Crystal structures of collagen triple helices reported so far contain artificial sequences like (Gly-Pro-Pro)(n) or (Gly-Pro-Hyp)(n). To gain insight into the structural properties exhibited by the natural type III collagen triple helix, we synthesized, crystallized, and determined the structure of a 12-triplet repeating peptide containing the natural type III collagen sequence from residues 991 to 1032 including the C-terminal cystine knot region, to 2.3A resolution. This represents the longest collagen triple helical structure determined to date with a native sequence. Strikingly, the Gly(991)-Gly(1032) structure reveals that the central non-imino acid-containing region adopts 10/3 superhelical properties, whereas the imino acid rich N- and C-terminal regions adhere to a 7/2 superhelical conformation. The structure is consistent with two models for the cystine knot; however, the poor density for the majority of this region suggests that multiple conformations may be adopted. The structure shows that the multiple non-imino acids make several types of direct intrahelical as well as interhelical contacts. The looser superhelical structure of the non-imino acid region of collagen triple helices combined with the extra contacts afforded by ionic and polar residues likely play a role in fibrillar assembly and interactions with other extracellular components.

Foldon-guided self-assembly of ultra-stable protein fibers

A common objective in protein engineering is the enhancement of the thermodynamic properties of recombinant proteins for possible applications in nanobiotechnology. The performance of proteins can be improved by the rational design of chimeras that contain structural elements with the desired properties, thus resulting in a more effective exploitation of protein folds designed by nature. In this paper, we report the design and characterization of an ultra-stable self-refolding protein fiber, which rapidly reassembles in solution after denaturation induced by harsh chemical treatment or high temperature. This engineered protein fiber was constructed on the molecular framework of bacteriophage P22 tail needle gp26, by fusing its helical core to the foldon domain of phage T4 fibritin. Using protein engineering, we rationally permuted the foldon upstream and downstream from the gp26 helical core and characterized gp26-foldon chimeras by biophysical analysis. Our data demonstrate that one specific protein chimera containing the foldon immediately downstream from the gp26 helical core, gp26(1-140)-F, displays the highest thermodynamic and structural stability and refolds spontaneously in solution following denaturation. The gp26-foldon chimeric fiber remains stable in 6.0 M guanidine hydrochloride, or at 80 degrees C, rapidly refolds after denaturation, and has both N and C termini accessible for chemical/biological modification, thereby representing an ideal platform for the design of self-assembling nanoblocks.

A tale of two symmetrical tails: structural and functional characteristics of palindromes in proteins

BACKGROUND

It has been previously shown that palindromic sequences are frequently observed in proteins. However, our knowledge about their evolutionary origin and their possible importance is incomplete.

RESULTS

In this work, we tried to revisit this relatively neglected phenomenon. Several questions are addressed in this work. (1) It is known that there is a large chance of finding a palindrome in low complexity sequences (i.e. sequences with extreme amino acid usage bias). What is the role of sequence complexity in the evolution of palindromic sequences in proteins? (2) Do palindromes coincide with conserved protein sequences? If yes, what are the functions of these conserved segments? (3) In case of conserved palindromes, is it always the case that the whole conserved pattern is also symmetrical? (4) Do palindromic protein sequences form regular secondary structures? (5) Does sequence similarity of the two "sides" of a palindrome imply structural similarity? For the first question, we showed that the complexity of palindromic peptides is significantly lower than randomly generated palindromes. Therefore, one can say that palindromes occur frequently in low complexity protein segments, without necessarily having a defined function or forming a special structure. Nevertheless, this does not rule out the possibility of finding palindromes which play some roles in protein structure and function. In fact, we found several palindromes that overlap with conserved protein Blocks of different functions. However, in many cases we failed to find any symmetry in the conserved regions of corresponding Blocks. Furthermore, to answer the last two questions, the structural characteristics of palindromes were studied. It is shown that palindromes may have a great propensity to form alpha-helical structures. Finally, we demonstrated that the two sides of a palindrome generally do not show significant structural similarities.

CONCLUSION

We suggest that the puzzling abundance of palindromic sequences in proteins is mainly due to their frequent concurrence with low-complexity protein regions, rather than a global role in the protein function. In addition, palindromic sequences show a relatively high tendency to form helices, which might play an important role in the evolution of proteins that contain palindromes. Moreover, reverse similarity in peptides does not necessarily imply significant structural similarity. This observation rules out the importance of palindromes for forming symmetrical structures. Although palindromes frequently overlap with conserved Blocks, we suggest that palindromes overlap with Blocks only by coincidence, rather than being involved with a certain structural fold or protein domain.

Collagen binding is a key factor for the hemorrhagic activity of snake venom metalloproteinases

Snake venom metalloproteinases (SVMPs) are multifunctional enzymes involved in several symptoms following snakebite, such as severe local hemorrhage. Multidomain P-III SVMPs are strongly hemorrhagic, whereas single domain P-I SVMPs are not. This indicates that disintegrin-like and cysteine-rich domains allocate motifs that enable catalytic degradation of ECM components leading to disruption of capillary vessels. Interestingly, some P-III SVMPs are completely devoid of hemorrhagic activity despite their highly conserved disintegrin-like and cysteine-rich domains. This observation was approached in the present study by comparing the effects of jararhagin, a hemorrhagic P-III SVMP, and berythractivase, a pro-coagulant and non-hemorrhagic P-III SVMP. Both toxins inhibited collagen-induced platelet aggregation, but only jararhagin was able to bind to collagen I with high affinity. The monoclonal antibody MAJar 3, that neutralizes the hemorrhagic effect of Bothrops venoms and jararhagin binding to collagen, did not react with berythractivase. The three-dimensional structures of jararhagin and berythractivase were compared to explain the differential binding to collagen and MAJar 3. Thereby, we pinpointed a motif within the Da disintegrin subdomain located opposite to the catalytic domain. Jararhagin binds to both collagen I and IV in a triple helix-dependent manner and inhibited in vitro fibrillogenesis. The jararhagin-collagen complex retained the catalytic activity of the toxin as observed by hydrolysis of fibrin. Thus, we suggest that binding of hemorrhagic SVMPs to collagens I and IV occurs through a motif located in the Da subdomain. This allows accumulation of toxin molecules at the site of injection, close to capillary vessels, where their catalytic activity leads to a local hemorrhage. Toxins devoid of this motif would be more available for vascular internalization leading to systemic pro-coagulant effects. This reveals a novel function of the disintegrin domain in hemorrhage formation.

Creation of hybrid nanorods from sequences of natural trimeric fibrous proteins using the fibritin trimerization motif

Stable, artificial fibrous proteins that can be functionalized open new avenues in fields such as bionanomaterials design and fiber engineering. An important source of inspiration for the creation of such proteins are natural fibrous proteins such as collagen, elastin, insect silks, and fibers from phages and viruses. The fibrous parts of this last class of proteins usually adopt trimeric, beta-stranded structural folds and are appended to globular, receptor-binding domains. It has been recently shown that the globular domains are essential for correct folding and trimerization and can be successfully substituted by a very small (27-amino acid) trimerization motif from phage T4 fibritin. The hybrid proteins are correctly folded nanorods that can withstand extreme conditions. When the fibrous part derives from the adenovirus fiber shaft, different tissue-targeting specificities can be engineered into the hybrid proteins, which therefore can be used as gene therapy vectors. The integration of such stable nanorods in devices is also a big challenge in the field of biomechanical design. The fibritin foldon domain is a versatile trimerization motif and can be combined with a variety of fibrous motifs, such as coiled-coil, collagenous, and triple beta-stranded motifs, provided the appropriate linkers are used. The combination of different motifs within the same fibrous molecule to create stable rods with multiple functions can even be envisioned. We provide a comprehensive overview of the experimental procedures used for designing, creating, and characterizing hybrid fibrous nanorods using the fibritin trimerization motif.

Revisiting the molecular structure of collagen

The triple helix is a specialized protein motif found in all collagens. Although X-ray diffraction studies of collagen began in the 1920s, the very small amount of data available from fiber diffraction of native collagen caused the determination of its molecular conformation to take a very long time. In the early 1950s, two plausible fiber periods of about 20 and 30 A were proposed, together with corresponding single-strand models having 7/2- and 10/3-helical symmetry, respectively. The first framework of the triple helix was proposed by Ramachandran and Kartha in 1955. In the same year, Rich and Crick proposed another structure with the same framework that avoided some of the steric problems of the first model. Their framework, which involved a triple-helical structure with a fiber period of 28.6 A and 10/3-helical symmetry, was exactly the same as one of two single-strand models for collagen proposed at that time, except for the number of strands. At that time, however, nobody considered the triple-strand model with the other framework, with a fiber period of 20 A and 7/2-helical symmetry, until Okuyama et al. detected this structure in the single crystal of (Pro-Pro-Gly)(10) in 1972. Although they proposed this structure as a new structural model for collagen in 1977, it has not been acknowledged as such, but instead has been regarded only as a model for a collagen-like peptide. In 2006, it was shown that both 7/2- and 10/3-helical models could explain X-ray diffraction data from native collagen quantitatively. Furthermore, during the past decade, many single crystals of collagen-model peptides have been analyzed at high resolution. The helical symmetries observed in these model peptides are very close to the ideal 7/2-helical symmetry, whereas no supporting data were found for the 10/3-helical model. This evidence strongly suggests that an average molecular structure of native collagen is the 7/2-helical model rather than the prevailing Rich and Crick (10/3-helical) model. Knowing the correct molecular structure, the driving force for the formation of a quarter-staggered structure in collagen fibrils will be elucidated in the near future by analysis incorporating the molecular structure of collagen and its amino acid sequence.

Natural and artificial cystine knots for assembly of homo- and heterotrimeric collagen models

Native collagens are molecules that are difficult to handle because of their high tendency towards aggregation and denaturation. It was discovered early on that synthetic collagenous peptides are more amenable to conformational characterization and thus can serve as useful models for structural and functional studies. Single-stranded collagenous peptides of high propensity to self-associate into triple-helical trimers were used for this purpose as well as interchain-crosslinked homotrimers assembled on synthetic scaffolds. With the growing knowledge of the biosynthetic pathways of natural collagens and the importance of their interchain disulfide crosslinks, which stabilize the triple-helical structure, native as well as de novo designed cystine knots have gained increasing attention in the assembly of triple-stranded collagen peptides. In addition, natural sequences of collagens were incorporated in order to biophysically characterize their functional epitopes. This review is focused on the methods developed over the years, and future perspectives for the production of collagen-mimicking synthetic and recombinant triple-helical homo- and heterotrimers.