Localized insulin-like growth factor I delivery to enhance new bone formation

Oral dehydroepiandrosterone supplementation enhances osteoporotic fracture healing in the OVX rats

Osteoporosis easily causes delayed fracture union, even non-union. It has been demonstrated that dehydroepiandrosterone (DHEA) supplementation can increase estrogen levels and improve bone mineral density (BMD) in the elderly, while the role of DHEA on fracture healing remains unknown. This study aimed to elucidate the impact of DHEA supplementation on osteoporotic fracture healing. Seventy-two female Sprague-Dawley rats were used. Forty-eight rats received ovariectomy (OVX), and the remaining rats received a sham OVX operation (sham group). A right transverse femoral osteotomy was performed in all rats at 12 weeks post-OVX. OVX rats were randomly allocated into 2 groups (n = 24 in each group): (i) ovariectomized rats (control group) and (ii) ovariectomized rats treated with DHEA (DHEA group, 5 mg/kg/day). The DHEA supplementation was initiated on the first day post-fracture for 3, 6, and 12 weeks. Fracture healing was evaluated by radiography, histology, biomechanical analysis, and dual-energy X-ray absorptiometry (DEXA). Serum biomarkers were analyzed using enzyme-linked immunosorbent assay (ELISA). At 3 and 6 weeks, radiographs revealed reduced calluses formation and lower radiographic scores in the control group than in other groups. The sham and DHEA groups showed higher BMD and bone mineral content (BMC) at the fracture site than the control group after fracture. Histological analysis revealed the fracture callus was remodeled better in the sham and DHEA groups than in the control group. At the early phase of healing, DHEA supplementation increased osteoblast number, callus area, and cartilage area than the control group. An increased bone area was observed in the DHEA group than in the control group at the late phase of healing. Additionally, improved biomechanical characteristics were observed in both the sham and DHEA groups than those in the control group post-fracture. ELISA showed higher levels of insulin-like growth factor-1 (IGF-1) and 17β-estradiol (E2) in the DHEA group than in the control group post-fracture. Furthermore, the DHEA group exhibited significantly elevated alkaline phosphatase (ALP) and osteocalcin (OC) levels compared to the control group at 6 and 12 weeks. The DHEA group and the control group did not exhibit a notable difference in TRAP-5b levels. The present study demonstrated that the DHEA treatment has a favorable impact on osteoporotic fracture healing by enhancing callus formation, consolidation, and strength in the OVX rats.

Locally Directed Recombinant Adeno- Associated Virus-Mediated IGF-1 Gene Therapy Enhances Osteochondral Repair and Counteracts Early Osteoarthritis In Vivo

BACKGROUND

Restoration of osteochondral defects is critical, because osteoarthritis (OA) can arise.

HYPOTHESIS

Overexpression of insulin-like growth factor 1 (IGF-1) via recombinant adeno-associated viral (rAAV) vectors (rAAV-IGF-1) would improve osteochondral repair and reduce parameters of early perifocal OA in sheep after 6 months in vivo.

STUDY DESIGN

Controlled laboratory study.

METHODS

Osteochondral defects were created in the femoral trochlea of adult sheep and treated with rAAV-IGF-1 or rAAV-lacZ (control) (24 defects in 6 knees per group). After 6 months in vivo, osteochondral repair and perifocal OA were assessed by well-established macroscopic, histological, and immunohistochemical scoring systems as well as biochemical and micro-computed tomography evaluations.

RESULTS

Application of rAAV-IGF-1 led to prolonged (6 months) IGF-1 overexpression without adverse effects, maintaining a significantly superior overall cartilage repair, together with significantly improved defect filling, extracellular matrix staining, cellular morphology, and surface architecture compared with rAAV-lacZ. Expression of type II collagen significantly increased and that of type I collagen significantly decreased. Subchondral bone repair and tidemark formation were significantly improved, and subchondral bone plate thickness and subarticular spongiosa mineral density returned to normal. The OA parameters of perifocal structure, cell cloning, and matrix staining were significantly better preserved upon rAAV-IGF-1 compared with rAAV-lacZ. Novel mechanistic associations between parameters of osteochondral repair and OA were identified.

CONCLUSION

Local rAAV-mediated IGF-1 overexpression enhanced osteochondral repair and ameliorated parameters of perifocal early OA.

CLINICAL RELEVANCE

IGF-1 gene therapy may be beneficial in repair of focal osteochondral defects and prevention of perifocal OA.

Investigations into the effects of scaffold microstructure on slow-release system with bioactive factors for bone repair

In recent years, bone tissue engineering (BTE) has played an essential role in the repair of bone tissue defects. Although bioactive factors as one component of BTE have great potential to effectively promote cell differentiation and bone regeneration, they are usually not used alone due to their short effective half-lives, high concentrations, etc. The release rate of bioactive factors could be controlled by loading them into scaffolds, and the scaffold microstructure has been shown to significantly influence release rates of bioactive factors. Therefore, this review attempted to investigate how the scaffold microstructure affected the release rate of bioactive factors, in which the variables included pore size, pore shape and porosity. The loading nature and the releasing mechanism of bioactive factors were also summarized. The main conclusions were achieved as follows: i) The pore shapes in the scaffold may have had no apparent effect on the release of bioactive factors but significantly affected mechanical properties of the scaffolds; ii) The pore size of about 400 μm in the scaffold may be more conducive to controlling the release of bioactive factors to promote bone formation; iii) The porosity of scaffolds may be positively correlated with the release rate, and the porosity of 70%-80% may be better to control the release rate. This review indicates that a slow-release system with proper scaffold microstructure control could be a tremendous inspiration for developing new treatment strategies for bone disease. It is anticipated to eventually be developed into clinical applications to tackle treatment-related issues effectively.

Evaluating the osteogenic potential of insulin-like growth factor-1 microspheres on osteoblastic activity around dental implants in patients with type 2 diabetes mellitus using bone scintigraphy: A split-mouth randomized controlled trial

STATEMENT OF PROBLEM

Dental implants are susceptible to early failure when placed in patients diagnosed with type 2 diabetes mellitus. The osteoinductive potential of insulin-like growth factor-1 (IGF-1) has been widely investigated in animals with type 2 diabetes mellitus, but studies investigating the osteoinductive potential of IGF-1 around dental implants in patients diagnosed with type 2 diabetes mellitus are lacking.

PURPOSE

This randomized controlled trial was conducted to assess the osteogenic efficacy of poly(lactide-co-glycolide)- (PLGA) encapsulated IGF-1 microspheres around dental implants placed in patients diagnosed with type 2 diabetes mellitus.

MATERIAL AND METHODS

A split-mouth, randomized controlled trial was conducted in 10 participants diagnosed with type 2 diabetes mellitus and with bilaterally missing mandibular posterior teeth. The 20 sites were randomly allotted to receive the PLGA encapsulated IGF-1 or placebo microspheres followed by the placement of Ø3.8×11-mm implants. Osteoblastic activity was quantitatively assessed with bone scintigraphy scanning on the thirtieth, sixtieth, and 90th day after implant placement. The Shapiro-Wilks test was used to analyze the normality of data, followed by the independent t test to compare the experimental and placebo groups. Intragroup comparison was performed by using repeated-measures ANOVA and the post hoc Bonferroni test (α=.05).

RESULTS

Statistical analysis revealed that the mean osteoblastic activity was higher in the experimental group which received the PLGA-encapsulated IGF-1 than in the placebo group at the 30th, 60th, and 90th day after implant placement (P≤.001).

CONCLUSIONS

This randomized controlled trial indicated that the PLGA-encapsulated sustained release of IGF-1 microspheres enhanced the process of osseointegration in patients diagnosed with type 2 diabetes mellitus until the 90th day after implant placement.

Plasma rich in growth factors (PRGF) and leukocyte-platelet rich fibrin (L-PRF): comparative release of growth factors and biological effect on osteoblasts

PURPOSE

To compare the release of platelet-derived growth factor (PDGF), vascular endothelial growth factor (VEGF), insulin-like growth factor (IGF-I) and interleukin 1β (IL-1β) of plasma rich in growth factors (PRGF) and leucocyte platelet-rich fibrin (L-PRF) and to evaluate their biological implication in osteoblasts.

METHODS

Blood from 3 healthy volunteers was processed into PRGF, immediate L-PRF (L-PRF 0') and L-PRF 30 min after collection (L-PRF-30') and a control group. Growth factors release were analyzed at 7 times by ELISA. Cell proliferation, collagen-I synthesis and alkaline phosphatase activity were assessed in primary cultures of human osteoblasts.

RESULTS

A slower controlled release of IGF-I, VEGF and PDGF was observed in the PRGF group at day 14. A higher synthesis of type I collagen was also quantified in PRGF. L-PRF released significantly higher amounts of IL-1β, that was almost absent in the PRGF.

CONCLUSIONS

The addition of leukocytes dramatically increases the secretion of proinflammatory cytokines, which are likely to negatively influence the synthesis of type I collagen and alkaline phosphatase (ALP) by osteoblasts.

Pluripotent stem cells for skeletal tissue engineering

Here, we review the use of human pluripotent stem cells for skeletal tissue engineering. A number of approaches have been used for generating cartilage and bone from both human embryonic stem cells and induced pluripotent stem cells. These range from protocols relying on intrinsic cell interactions and signals from co-cultured cells to those attempting to recapitulate the series of steps occurring during mammalian skeletal development. The importance of generating authentic tissues rather than just differentiated cells is emphasized and enabling technologies for doing this are reported. We also review the different methods for characterization of skeletal cells and constructs at the tissue and single-cell level, and indicate newer resources not yet fully utilized in this field. There have been many challenges in this research area but the technologies to overcome these are beginning to appear, often adopted from related fields. This makes it more likely that cost-effective and efficacious human pluripotent stem cell-engineered constructs may become available for skeletal repair in the near future.

Platelet-Rich Plasma as an Alternative to Xenogeneic Sera in Cell-Based Therapies: A Need for Standardization

There has been an explosion in scientific interest in using human-platelet-rich plasma (PRP) as a substitute of xenogeneic sera in cell-based therapies. However, there is a need to create standardization in this field. This systematic review is based on literature searches in PubMed and Web of Science databases until June 2021. Forty-one studies completed the selection criteria. The composition of PRP was completely reported in less than 30% of the studies. PRP has been used as PRP-derived supernatant or non-activated PRP. Two ranges could be identified for platelet concentration, the first between 0.14 × 10⁶ and 0.80 × 10⁶ platelets/µL and the second between 1.086 × 10⁶ and 10 × 10⁶ platelets/µL. Several studies have pooled PRP with a pool size varying from four to nine donors. The optimal dose for the PRP or PRP supernatant is 10%. PRP or PRP-derived supernatants a have positive effect on MSC colony number and size, cell proliferation, cell differentiation and genetic stability. The use of leukocyte-depleted PRP has been demonstrated to be a feasible alternative to xenogeneic sera. However, there is a need to improve the description of the PRP preparation methodology as well as its composition. Several items are identified and reported to create guidelines for future research.

Merging bioresponsive release of insulin-like growth factor I with 3D printable thermogelling hydrogels

3D printing of biomaterials enables spatial control of drug incorporation during automated manufacturing. This study links bioresponsive release of the anabolic biologic, insulin-like growth factor-I (IGF-I) in response to matrix metalloproteinases (MMP) to 3D printing using the block copolymer of poly(2-methyl-2-oxazoline) and thermoresponsive poly(2-n-propyl-2-oxazine) (POx-b-POzi). For that, a chemo-enzymatic synthesis was deployed, ligating IGF-I enzymatically to a protease sensitive linker (PSL), which was conjugated to a POx-b-POzi copolymer. The product was blended with the plain thermogelling POx-b-POzi hydrogel. MMP exposure of the resulting hydrogel triggered bioactive IGF-I release. The bioresponsive IGF-I containing POx-b-POzi hydrogel system was further detailed for shape control and localized incorporation of IGF-I via extrusion 3D printing for future applications in biomedicine and biofabrication.

Resolution of inflammation in bone regeneration: From understandings to therapeutic applications

Impaired bone healing occurs in 5-10% of cases following injury, leading to a significant economic and clinical impact. While an inflammatory response upon injury is necessary to facilitate healing, its resolution is critical for bone tissue repair as elevated acute or chronic inflammation is associated with impaired healing in patients and animal models. This process is governed by important crosstalk between immune cells through mediators that contribute to resolution of inflammation in the local healing environment. Approaches modulating the initial inflammatory phase followed by its resolution leads to a pro-regenerative environment for bone regeneration. In this review, we discuss the role of inflammation in bone repair, the negative impact of dysregulated inflammation on bone tissue regeneration, and how timely resolution of inflammation is necessary to achieve normal healing. We will discuss applications of biomaterials to treat large bone defects with a specific focus on resolution of inflammation to modulate the immune environment following bone injury, and their observed functional benefits. We conclude the review by discussing future strategies that could lead to the realization of anti-inflammatory therapeutics for bone tissue repair.

Advances in Growth Factor Delivery for Bone Tissue Engineering

Shortcomings related to the treatment of bone diseases and consequent tissue regeneration such as transplants have been addressed to some extent by tissue engineering and regenerative medicine. Tissue engineering has promoted structures that can simulate the extracellular matrix and are capable of guiding natural bone repair using signaling molecules to promote osteoinduction and angiogenesis essential in the formation of new bone tissues. Although recent studies on developing novel growth factor delivery systems for bone repair have attracted great attention, taking into account the complexity of the extracellular matrix, scaffolding and growth factors should not be explored independently. Consequently, systems that combine both concepts have great potential to promote the effectiveness of bone regeneration methods. In this review, recent developments in bone regeneration that simultaneously consider scaffolding and growth factors are covered in detail. The main emphasis in this overview is on delivery strategies that employ polymer-based scaffolds for spatiotemporal-controlled delivery of both single and multiple growth factors in bone-regeneration approaches. From clinical applications to creating alternative structural materials, bone tissue engineering has been advancing constantly, and it is relevant to regularly update related topics.

A Mouse Femoral Ostectomy Model to Assess Bone Graft Substitutes

The shortcomings of autografts and allografts in bone defect healing have prompted researchers to develop suitable alternatives. Numerous biomaterials have been developed as bone graft substitutes each with their own advantages and disadvantages. However, in order to test if these biomaterials provide an adequate replacement of the clinical standard, a clinically representative animal model is needed to test their efficacy. In this chapter, we describe a mouse model that establishes a critical sized defect in the mid-diaphysis of the femur to evaluate the performance of bone graft substitutes. This is achieved by performing a femoral ostectomy and stabilization utilizing a femoral plate and titanium screws. The resulting defect enables the bone regenerative potential of bone graft substitutes to be investigated. Lastly, we provide instruction on assessing the torsional strength of the healed femurs to quantitatively evaluate the degree of healing as a primary outcome measure.

Growth Factors, Carrier Materials, and Bone Repair

This chapter provides an overview of the growth factors active in bone regeneration and healing. Both normal and impaired bone healing are discussed, with a focus on the spatiotemporal activity of the various growth factors known to be involved in the healing response. The review highlights the activities of most important growth factors impacting bone regeneration, with a particular emphasis on those being pursued for clinical translation or which have already been marketed as components of bone regenerative materials. Current approaches the use of bone grafts in clinical settings of bone repair (including bone grafts) are summarized, and carrier systems (scaffolds) for bone tissue engineering via localized growth factor delivery are reviewed. The chapter concludes with a consideration of how bone repair might be improved in the future.

Bone Microvasculature: Stimulus for Tissue Function and Regeneration

Bone is a highly vascularized organ, providing structural support to the body, and its development, regeneration, and remodeling depend on the microvascular homeostasis. Loss or impairment of vascular function can develop diseases, such as large bone defects, avascular necrosis, osteoporosis, osteoarthritis, and osteopetrosis. In this review, we summarize how vasculature controls bone development and homeostasis in normal and disease cases. A better understanding of this process will facilitate the development of novel disease treatments that promote bone regeneration and remodeling. Specifically, approaches based on tissue engineering components, such as stem cells and growth factors, have demonstrated the capacity to induce bone microvasculature regeneration and mineralization. This knowledge will have relevant clinical implications for the treatment of bone disorders by developing novel pharmaceutical approaches and bone grafts. Finally, the tissue engineering approaches incorporating vascular components may widely be applied to treat other organ diseases by enhancing their regeneration capacity. Impact statement Bone vasculature is imperative in the process of bone development, regeneration, and remodeling. Alterations or disruption of the bone vasculature leads to loss of bone homeostasis and the development of bone diseases. In this study, we review the role of vasculature on bone diseases and how vascular tissue engineering strategies, with a detailed emphasis on the role of stem cells and growth factors, will contribute to bone therapeutics.

MGF-19E peptide promoted proliferation, differentiation and mineralization of MC3T3-E1 cell and promoted bone defect healing

The repair of segmental bone defects and bone fractures is a clinical challenge involving high risk and postsurgical morbidity. Bone injury and partial bone tumor resection via traditional bone grafting result in high complications. Growth factors have been proposed as alternatives to promote bone repair and formation and circumvent these limitations. In this study, we classified different lengths of mechano growth factor (MGF) E peptides in different species and analyzed their effects on MC3T3-E1 cell proliferation, cell cycle, alkaline phosphatase (ALP) activity, differentiation-related factor expression, and cell mineralization. A rabbit bone injury model was constructed, and the repair function of MGF E peptide was verified by injecting the candidate MGF E peptide. We analyzed 52 different MGF-E peptides and classified them into the following four categories: T-MGF-25E, M-MGF-25E, T-MGF-19E, and M-MGF-19E. These peptides were synthesized for further study. T-MGF-19E peptide obviously promoted cell proliferation by regulating cell cycle after MGF E peptide treatment at 72 h. T-MGF-25E and T-MGF-19E peptide significantly promoted the differentiation of osteoblasts on day 14, and M-MGF-25E peptide promoted cell differentiation on day 7. T-MGF-19E, T-MGF-25E, and M-MGF-19E significantly promoted osteoblast mineralization, with T-MGF19E showing the most significant effect. These results implied that T-MGF19E peptide could remarkably promote MC3T3-E1 cell proliferation, differentiation, and mineralization. The rabbit bone defect model showed that the low-dose T-MGF-19E peptide significantly promoted bone injury healing, suggesting its promoting effect on the healing of bone injury.

Tissue Engineering for Musculoskeletal Regeneration and Disease Modeling

Musculoskeletal injuries and associated conditions are the leading cause of physical disability worldwide. The concept of tissue engineering has opened up novel approaches to repair musculoskeletal defects in a fast and/or efficient manner. Biomaterials, cells, and signaling molecules constitute the tissue engineering triad. In the past 40 years, significant progress has been made in developing and optimizing all three components, but only a very limited number of technologies have been successfully translated into clinical applications. A major limiting factor of this barrier to translation is the insufficiency of two-dimensional cell cultures and traditional animal models in informing the safety and efficacy of in-human applications. In recent years, microphysiological systems, often referred to as organ or tissue chips, generated according to tissue engineering principles, have been proposed as the next-generation drug testing models. This chapter aims to first review the current tissue engineering-based approaches that are being applied to fabricate and develop the individual critical elements involved in musculoskeletal organ/tissue chips. We next highlight the general strategy of generating musculoskeletal tissue chips and their potential in future regenerative medicine research. Exemplary microphysiological systems mimicking musculoskeletal tissues are described. With sufficient physiological accuracy and relevance, the human cell-derived, three-dimensional, multi-tissue systems have been used to model a number of orthopedic disorders and to test new treatments. We anticipate that the novel emerging tissue chip technology will continually reshape and improve our understanding of human musculoskeletal pathophysiology, ultimately accelerating the development of advanced pharmaceutics and regenerative therapies.

Materials Science and Design Principles of Growth Factor Delivery Systems in Tissue Engineering and Regenerative Medicine

Growth factors (GFs) are signaling molecules that direct cell development by providing biochemical cues for stem cell proliferation, migration, and differentiation. GFs play a key role in tissue regeneration, but one major limitation of GF-based therapies is dosage-related adverse effects. Additionally, the clinical applications and efficacy of GFs are significantly affected by the efficiency of delivery systems and other pharmacokinetic factors. Hence, it is crucial to design delivery systems that provide optimal activity, stability, and tunable delivery for GFs. Understanding the physicochemical properties of the GFs and the biomaterials utilized for the development of biomimetic GF delivery systems is critical for GF-based regeneration. Many different delivery systems have been developed to achieve tunable delivery kinetics for single or multiple GFs. The identification of ideal biomaterials with tunable properties for spatiotemporal delivery of GFs is still challenging. This review characterizes the types, properties, and functions of GFs, the materials science of widely used biomaterials, and various GF loading strategies to comprehensively summarize the current delivery systems for tunable spatiotemporal delivery of GFs aimed for tissue regeneration applications. This review concludes by discussing fundamental design principles for GF delivery vehicles based on the interactive physicochemical properties of the proteins and biomaterials.

Tendon healing in the context of complex fractures

Tendons connect muscle to bone and play an integral role in bone and joint alignment and loading. Tendons act as pulleys that provide anchorage of muscle forces for joint motion and stability, as well as for fracture reduction and realignment. Patients that experience complex fractures also have concomitant soft tissue injuries, such as tendon damage or rupture. Tendon injuries that occur at the time of bone fracture have long-term ramifications on musculoskeletal health, yet these injuries are often disregarded in clinical treatment and diagnosis for patients with bone fractures as well as in basic science approaches for understanding bone repair processes. Delayed assessment of soft tissue injuries during evaluation of trauma can lead to chronic pain, dysfunction, and delayed bone healing even following successful fracture repair, highlighting the importance of identifying and treating damaged tendons early. Treatment strategies for bone repair, such as mechanical stabilization and biological therapeutics, can impact tendon healing and function. Because poor tendon healing following complex fracture can significantly impact the function of tendon during bone fracture healing, a need exists to understand the healing process of complex fractures more broadly, beyond the healing of bone. In this review, we explored the mechanical and biological interaction of bone and tendon in the context of complex fracture, as well as the relevance and potential ramifications of tendon damage following bone fracture, which has particular impact on patients that experience complex fractures, such as from combat, automobile accidents, and other trauma.

The Unexplored Crossroads of the Female Athlete Triad and Iron Deficiency: A Narrative Review

Despite the severity and prevalence of iron deficiency in exercising women, few published reports have explored how iron deficiency interacts with another prevalent and severe condition in exercising women: the 'female athlete triad.' This review aims to describe how iron deficiency may interact with each component of the female athlete triad, that is, energy status, reproductive function, and bone health. The effects of iron deficiency on energy status are discussed in regards to thyroid function, metabolic fuel availability, eating behaviors, and energy expenditure. The interactions between iron deficiency and reproductive function are explored by discussing the potentially impaired fertility and hyperprolactinemia due to iron deficiency and the alterations in iron metabolism due to menstrual blood loss and estrogen exposure. The interaction of iron deficiency with bone health may occur via dysregulation of the growth hormone/insulin-like growth factor-1 axis, hypoxia, and hypothyroidism. Based on these discussions, several future directions for research are presented.

Nonunion fracture healing: Evaluation of effectiveness of demineralized bone matrix and mesenchymal stem cells in a novel sheep bone nonunion model

Nonunion treatment has a high rate of success, although recalcitrant nonunion may determine the need for amputation. Therefore, new treatment options are continuously investigated in order to further reduce the risk of nonunion recurrence. This study aimed to (a) develop a new large animal model for bone atrophic nonunion and (b) compare the efficacy of demineralized bone matrix (DBM) and DBM in combination with mesenchymal stem cells (MSC) in the new nonunion model. The new model consists of a noncritical, full-thickness segmental defect created in the sheep tibia, stabilized by an intramedullary nail, and involves the creation of a locally impaired blood supply achieved through periosteum excision and electrocauterization of the stump ends. Six weeks after defect creation, lack of hard tissue callus and established nonunion was observed in all operated tibiae both by radiographic and clinical evaluation. Nonunion was treated with allogeneic DBM or autologous MSC cultivated on DBM particles (DBM + MSC) for 1 day before implantation. Twelve weeks after treatment, radiographic, microtomographic, histologic, and histomorphometric analysis showed the formation of bone callus in DBM group, whereas the fracture healing appeared at an early stage in DBM + MSC group. Torsional strength and stiffness of the DBM group appeared higher than those of DBM + MSC group, although the differences were not statistically significant. In conclusion, a new sheep bone nonunion model resembling the complexity of the clinical condition was developed. DBM is an effective option for nonunion treatment, whereas MSC do not improve the healing process when cultivated on DBM particles before implantation.

Recent advances in gene-enhanced bone tissue engineering

The loss of bone tissue represents a critical clinical condition that is frequently faced by surgeons. Substantial progress has been made in the area of bone research, providing insight into the biology of bone under physiological and pathological conditions, as well as tools for the stimulation of bone regeneration. The present review discusses recent advances in the field of gene-enhanced bone tissue engineering. Gene transfer strategies have emerged as highly effective tissue engineering approaches for supporting the repair of the musculoskeletal system. By contrast to treatment with recombinant proteins, genetically engineered cells can release growth factors at the site of injury over extended periods of time. Of particular interest are the expedited technologies that can be applied during a single surgical procedure in a cost-effective manner, allowing translation from bench to bedside. Several promising methods based on the intra-operative genetic manipulation of autologous cells or tissue fragments have been developed in preclinical studies. Moreover, gene therapy for bone regeneration has entered the clinical stage with clinical trials for the repair of alveolar bone. Current trends in gene-enhanced bone engineering are also discussed with respect to the movement of the field towards expedited, translational approaches. It is possible that gene-enhanced bone tissue engineering will become a clinical reality within the next few years.

Organ-On-A-Chip Platforms: A Convergence of Advanced Materials, Cells, and Microscale Technologies

Significant advances in biomaterials, stem cell biology, and microscale technologies have enabled the fabrication of biologically relevant tissues and organs. Such tissues and organs, referred to as organ-on-a-chip (OOC) platforms, have emerged as a powerful tool in tissue analysis and disease modeling for biological and pharmacological applications. A variety of biomaterials are used in tissue fabrication providing multiple biological, structural, and mechanical cues in the regulation of cell behavior and tissue morphogenesis. Cells derived from humans enable the fabrication of personalized OOC platforms. Microscale technologies are specifically helpful in providing physiological microenvironments for tissues and organs. In this review, biomaterials, cells, and microscale technologies are described as essential components to construct OOC platforms. The latest developments in OOC platforms (e.g., liver, skeletal muscle, cardiac, cancer, lung, skin, bone, and brain) are then discussed as functional tools in simulating human physiology and metabolism. Future perspectives and major challenges in the development of OOC platforms toward accelerating clinical studies of drug discovery are finally highlighted.

Mesenchymal stem cells with IGF-1 and TGF- β1 in laminin gel for osteochondral defects in rabbits

OBJECTIVE

Healing of articular cartilage is still a challenge due to its limited potential to regenerate. In the present study, we evaluated allogenic bone marrow mesenchymal stem cells (BM-MSCs) alone or in combination with growth factors, insulin-like growth factor-1 (IGF-1) and transforming growth factor-β1 (TGF-β1) in laminin scaffolds for healing of osteochondral defects.

DESIGN

Osteochondral defects of 4mm (diameter) x 5mm (depth) were induced in the rabbit knee joints and treated with phosphate-buffered saline (PBS; control), BM-MSCs, BM-MSCs in laminin, BM-MSCs in laminin with IGF-1, or BM-MSCs in laminin with IGF-1 and TGF-β1 in 10 animals each. Gross, radiographic, scanning electron microscopic (SEM) and histologic examinations besides chondrocyte-specific genes expression by quantitative real time qPCR were carried out at 8 and 12 weeks.

RESULTS

Gross and SEM examination revealed superior morphology and surface architecture of the healing site in animals that received MSCs with IGF-1 or IGF-1 and TGF-β1. The application of laminin composites containing MSCs with IGF-1 and TGF-β1 significantly enhanced hyaline cartilage formation with improved cellular arrangement, proteoglycan deposition, clear tidemark zone and subchondral bone formation. However, regenerated tissue in defects that received only MSCs had poor tidemark zone and proteoglycans deposition Aggrecan and Coll2 expression was significantly higher in case of MSCs with growth factors.

CONCLUSION

The treatment with BM-MSCs combined with IGF-1/TGF-β1 into laminin gel scaffold might enhance the restoration of hyaline cartilage in osteochondral defect.

Autologous minced muscle grafts improve endogenous fracture healing and muscle strength after musculoskeletal trauma

The deleterious impact of concomitant muscle injury on fracture healing and limb function is commonly considered part of the natural sequela of orthopedic trauma. Recent reports suggest that heightened inflammation in the surrounding traumatized musculature is a primary determinant of fracture healing. Relatedly, there are emerging potential therapeutic approaches for severe muscle trauma (e.g., volumetric muscle loss [VML] injury), such as autologous minced muscle grafts (1 mm3 pieces of muscle; GRAFT), that can partially prevent chronic functional deficits and appear to have an immunomodulatory effect within VML injured muscle. The primary goal of this study was to determine if repair of VML injury with GRAFT rescues impaired fracture healing and improves the strength of the traumatized muscle in a male Lewis rat model of tibia open fracture. The most salient findings of the study were: (1) tibialis anterior (TA) muscle repair with GRAFT improved endogenous healing of fractured tibia and improved the functional outcome of muscle regeneration; (2) GRAFT repair attenuated the monocyte/macrophage (CD45+CDllb+) and T lymphocyte (CD3+) response to VML injury; (3) TA muscle protein concentrations of MCP1, IL-10, and IGF-1 were augmented in a proregenerative manner by GRAFT repair; (4) VML injury concomitant with osteotomy induced a heightened systemic presence of alarmins (e.g., soluble RAGE) and leukocytes (e.g., monocytes), and depressed IGF-1 concentration, which GRAFT repair ameliorated. Collectively, these data indicate that repair of VML injury with a regenerative therapy can modulate the inflammatory and regenerative phenotype of the treated muscle and in association improve musculoskeletal healing.

A systems biology approach to studying the molecular mechanisms of osteoblastic differentiation under cytokine combination treatment

Recent studies revealed that sequential release of bone morphogenetic protein 2 and insulin-like growth factor 1 plays an important role in osteogenic process, suggesting that cytokines bone morphogenetic protein 2 and insulin-like growth factor 1 function in a time-dependent manner. However, the specific molecular mechanisms underlying these observations remained elusive, impeding the elaborate manipulation of cytokine sequential delivery in tissue repair. The aim of this study was to identify the key relevant pathways and processes regulating bone morphogenetic protein 2/insulin-like growth factor 1-mediated osteoblastic differentiation. Based on the microarray and proteomics data, and differentiation/growth status of mouse bone marrow stromal cells, we constructed a multiscale systems model to simulate the bone marrow stromal cells lineage commitment and bone morphogenetic protein 2 and insulin-like growth factor 1-regulated signaling dynamics. The accuracy of our model was validated using a set of independent experimental data. Our study reveals that, treatment of bone marrow stromal cells with bone morphogenetic protein 2 prior to insulin-like growth factor 1 led to the activation of transcription factor Runx2 through TAK1-p38 MAPK and SMAD1/5 signaling pathways and initiated the lineage commitment of bone marrow stromal cells. Delivery of insulin-like growth factor 1 four days after bone morphogenetic protein 2 treatment optimally activated transcription factors osterix and β-catenin through ERK and AKT pathways, which are critical to preosteoblast maturity. Our systems biology approach is expected to provide technical and scientific support in optimizing therapeutic scheme to improve osteogenesis/bone regeneration and other essential biological processes.

The Role of Heparan Sulfate and Perlecan in Bone-regenerative Procedures

Tissue engineering, grafting procedures, regeneration, and tissue remodeling are developing therapeutic modalities with great potential medical value, but these regenerative modalities are not as effective or predictable as clinicians and patients would like. Greater understanding of growth factors, cytokines, extracellular matrix molecules, and their roles in cell-mediated healing processes have made these regenerative therapies more clinically viable and will continue advancing the fields of tissue engineering and grafting. However, millions of oral and non-oral bone-grafting procedures are performed annually, and only a small percentage yield the most desirable results. Here we review the heparan-sulfate-decorated extracellular biomolecule named perlecan and the research relating to its potential as an adjunct in bone-regenerative procedures. The review includes an overview of bone graft substitutes and biological adjuncts to bone-regenerative procedures in medicine as they apply to periodontal disease, alveolar ridge augmentation, and barrier membrane therapy. Perlecan is discussed as a potential biological adjunct in terms of growth factor sequestration and delivery, and promoting cell adhesion, proliferation, differentiation, and angiogenesis. Further, we propose delivery and application schemes for perlecan and/or its domains in bone-regenerative procedures, with particular emphasis on its heparan-sulfate-decorated domain I. The perlecan molecule, with its heparan sulfate glycosylation, may provide a multi-faceted approach for the delivery of a more comprehensive stimulus than other single potential adjuncts currently available for bone-regenerative procedures.

Conditional deletion of IGF-I in osteocytes unexpectedly accelerates bony union of the fracture gap in mice

This study evaluated the effects of deficient IGF-I expression in osteocytes on fracture healing. Transgenic mice with conditional knockout (cKO) of Igf1 in osteocytes were generated by crossing Dmp1-Cre mice with Igf1 flox mice. Fractures were created on the mid-shaft of tibia of 12-week-old male cKO mice and wild-type (WT) littermates by three-point bending. At 21 and 28days post-fracture healing, the increases in cortical bone mineral density, mineral content, bone area, and thickness, as well as sub-cortical bone mineral content at the fracture site were each greater in cKO calluses than in WT calluses. There were 85% decrease in the cartilage area and >2-fold increase in the number of osteoclasts in cKO calluses at 14days post-fracture, suggesting a more rapid remodeling of endochondral bone. The upregulation of mRNA levels of osteoblast marker genes (cbfa1, alp, Opn, and Ocn) was greater in cKO calluses than in WT calluses. μ-CT analysis suggested an accelerated bony union of the fracture gap in cKO mice. The Sost mRNA level was reduced by 50% and the Bmp2 mRNA level was increased 3-fold in cKO fractures at 14days post-fracture, but the levels of these two mRNAs in WT fractures were unchanged, suggesting that the accelerated fracture repair may in part act through the Wnt and/or BMP signaling. In conclusion, conditional deletion of Igf1 in osteocytes not only did not impair, but unexpectedly enhanced, bony union of the fracture gap. The accelerated bony union was due in part to upregulation of the Wnt and BMP2 signaling in response to deficient osteocyte-derived IGF-I expression, which in turn favors intramembranous over endochondral bone repair.

A novel nonviral gene delivery tool of BMP-2 for the reconstitution of critical-size bone defects in rats

The osseointegration of bone implants, implant failure, and the bridging of critical-size bone defects are frequent clinical challenges. Deficiencies in endogenous bone healing can be resolved through the local administration of suitable recombinant growth factors (GFs). In preclinical models, gene-therapy-supported bone healing has proven promising for overcoming certain limitations of GFs. We report the dose-dependent bridging of critical-size mandibular bone defects (CSDs) in a rat model using a non-viral BMP-2-encoding copolymer-protected gene vector (pBMP-2) embedded in poly(d, l-lactide) (PDLLA) coatings on titanium discs that were used to cover drill holes in the mandibles of 53 male Sprague Dawley rats. After sacrificing, the mandibles were subjected to micro-computed tomography (µCT), micro-radiography, histology, and fluorescence analyses to evaluate bone regeneration. pBMP-2 in PDLLA-coated titanium implants promoted partial bridging of bone defects within 14 days and complete defect healing within 112 days when the DNA dose per implant did not exceed 2.5 µg. No bridging was observed in untreated control CSDs. Thus, the delivery of plasmid DNA coding for BMP-2 appears to be a potent method for controlled new-bone formation with an inverse dose dependency. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 104A: 2441-2455, 2016.

Establishment of a preclinical ovine screening model for the investigation of bone tissue engineering strategies in cancellous and cortical bone defects

Background

New tissue engineering strategies for bone regeneration need to be investigated in a relevant preclinical large animal model before making the translation into human patients. Therefore, our interdisciplinary group established a simplified large animal screening model for intramembranous bone defect regeneration in cancellous and cortical bone.

Methods

Related to a well-established model of cancellous drill hole defect regeneration in sheep, both the proximal and distal epimetaphyseal regions of the femur and the humerus were used bilaterally for eight drill hole cancellous defects (Ø 6 mm, 15 mm depth). Several improvements of the surgical procedure and equipment for an easier harvest of samples were invented. For the inclusion of cortical defect regeneration, a total of eight unicortical diaphyseal drill holes (6 mm Ø) were placed in the proximal-lateral and distal-medial parts of the metacarpal (MC) and metatarsal (MT) diaphyseal bone bilaterally. Acting moments within a normal gait cycle in the musculoskeletal lower limb model were compared with the results of the biomechanical in vitro torsion test until failure to ensure a low accidental fracture risk of utilized bones (ANOVA, p < 0.05). The model was tested in vivo, using thirteen adult, female, black-face sheep (Ø 66 kg; ± 5 kg; age ≥ 2.5 years). In a two-step surgical procedure 16 drill holes were performed for the investigation of two different time points within one animal. Defects were left empty, augmented with autologous cancellous bone or soft bone graft substitutes.

Results

The in vitro tests confirmed this model a high comparability between drilled MC and MT bones and a high safety margin until fracture. The exclusion of one animal from the in vivo study, due to a spiral fracture of the left MC bone led to a tolerable failure rate of 8 %.

Conclusions

As a screening tool, promising biomaterials can be tested in this cancellous and cortical bone defect model prior to the application in a more complex treatment site.

Tissue engineering strategies for promoting vascularized bone regeneration

This review focuses on current tissue engineering strategies for promoting vascularized bone regeneration. We review the role of angiogenic growth factors in promoting vascularized bone regeneration and discuss the different therapeutic strategies for controlled/sustained growth factor delivery. Next, we address the therapeutic uses of stem cells in vascularized bone regeneration. Specifically, this review addresses the concept of co-culture using osteogenic and vasculogenic stem cells, and how adipose derived stem cells compare to bone marrow derived mesenchymal stem cells in the promotion of angiogenesis. We conclude this review with a discussion of a novel approach to bone regeneration through a cartilage intermediate, and discuss why it has the potential to be more effective than traditional bone grafting methods.

A comparative morphometric analysis of biodegradable scaffolds as carriers for dental pulp and periosteal stem cells in a model of bone regeneration

Bone regeneration and bone fixation strategies in dentistry utilize scaffolds containing regenerating-competent cells as a replacement of the missing bone portions and gradually replaced by autologous tissues. Mesenchymal stem cells represent an ideal cell population for scaffold-based tissue engineering. Among them, dental pulp stem cells (DPSCs) and periosteal stem cells (PeSCs) have the potential to differentiate into a variety of cell types including osteocytes, suggesting that they can be used with this purpose. However, data on bone regeneration properties of these types of cells in scaffold-based tissue engineering are yet insufficient.In this study, we evaluated temporal dynamic bone regeneration (measured as a percentage of bone volume on the total area of the defect) induced by DPSCs or PeSCs when seeded with different scaffolds to fill critical calvarial defects in SCID Beige nude mice. Two commercially available scaffolds (granular deproteinized bovine bone with 10% porcine collagen and granular β;-tricalcium phosphate) and one not yet introduced on the market (a sponge of agarose and nanohydroxyapatite) were used. The results showed that tissue-engineered constructs did not significantly improve bone-induced regeneration process when compared with the effect of scaffolds alone. In addition, the data also showed that the regeneration induced by β;-tricalcium phosphate alone was higher after 8 weeks than that of scaffold seeded with the 2 stem cell lines. Altogether these findings suggest that further studies are needed to evaluate the potential of DPSCs and PeSCs in tissue construct and identify the appropriate conditions to generate bone tissue in critical-size defects.

In vitro and in vivo evaluation of the marine sponge skeleton as a bone mimicking biomaterial

This investigation was carried out to identify and characterize marine sponges as potential bioscaffolds in bone tissue engineering.

Platelet-Rich Preparations to Improve Healing. Part I: Workable Options for Every Size Practice

Numerous studies have demonstrated that platelet-rich preparations applied to surgical sites, injuries, or wounds are a safe and effective way to promote soft tissue healing and bone growth. Various protocols have been developed for preparing platelet-rich preparations, with subtle but important differences between them. Unfortunately, only a minority of clinicians use platelet-rich preparations, such as platelet-rich plasma and platelet-rich fibrin, in their practice, possibly due to confusion about the different methods and their advantages and disadvantages. Therefore, the different types of preparations are described to help guide the selection of the best method for any size practice. Classic methods generally require large volumes of blood and can be expensive, complicated, and time-intensive. Simpler protocols have been developed recently, which require relatively inexpensive equipment and small blood volumes and, thus, may be more applicable for small clinical practices. Platelet-rich preparations accelerate healing at earlier time points to reduce discomfort and the potential for adverse outcomes, including infection, poor wound closure, and delays in forming strong bone for subsequent procedures (such as implants). However, platelet-rich preparations may also improve long-term outcomes in patients expected to have impaired healing, such as with lifestyle choices (eg, smoking), medications (eg, steroids), diseases (eg, diabetes, osteoporosis, atherosclerosis), and aging, by supplementing the deficient wound environment to restore proper healing. Therefore, both large and small clinical practices would benefit from utilizing platelet-rich preparations to enhance healing in their patients.

Impact of IGF-I release kinetics on bone healing: a preliminary study in sheep

Spatiotemporal release of growth factors from a delivery device can profoundly affect the efficacy of bone growth induction. Here, we report on a delivery platform based on the encapsulation of insulin-like growth factor I (IGF-I) in different poly(D,L-lactide) (PLA) and poly(D,L-lactide-co-glycolide) (PLGA) microsphere (MS) formulations to control IGF-I release kinetics. In vitro IGF-I release profiles generally exhibited an initial burst (14-36% of total IGF-I content), which was followed by a more or less pronounced dormant phase with little release (2 to 34 days), and finally, a third phase of re-increased IGF-I release. The osteoinductive potential of these different IGF-I PL(G)A MS formulations was tested in studies using 8-mm metaphyseal drill hole bone defects in sheep. Histomorphometric analysis at 3 and 6 weeks after surgery showed that new bone formation was improved in the defects locally treated with IGF-I PL(G)A MS (n=5) as compared to defects filled with IGF-I-free PL(G)A MS (n=4). The extent of new bone formation was affected by the particular release kinetics, although a definitive relationship was not evident. Local administration of IGF-I resulted in down-regulation of inflammatory marker genes in all IGF-I treated defects. The over-expression of growth factor genes in response to IGF-I delivery was restricted to formulations that produced osteogenic responses. These experiments demonstrate the osteoinductive potential of sustained IGF-I delivery and show the importance of delivery kinetics for successful IGF-I-based therapies.

Role of Osteocyte-derived Insulin-Like Growth Factor I in Developmental Growth, Modeling, Remodeling, and Regeneration of the Bone

The osteocyte has long been considered to be the primary mechanosensory cell in the bone. Recent evidence has emerged that the osteocyte is also a key regulator of various bone and mineral metabolism and that its regulatory effects are in part mediated through locally produced osteocyte-derived factors, such as sclerostin, receptor activator of nuclear factor-kappa B ligand (RANKL), and fibroblast growth factor (FGF)-23. Osteocytes secrete large amounts of insulin-like growth factor (IGF)-I in bone. Although IGF-I produced locally by other bone cells, such as osteoblasts and chondrocytes, has been shown to play important regulatory roles in bone turnover and developmental bone growth, the functional role of osteocyte-derived IGF-I in the bone and mineral metabolism has not been investigated and remains unclear. However, results of recent studies in osteocyte Igf1 conditional knockout transgenic mice have suggested potential regulatory roles of osteocyte-derived IGF-I in various aspects of bone and mineral metabolism. In this review, evidence supporting a regulatory role for osteocyte-derived IGF-I in the osteogenic response to mechanical loading, the developmental bone growth, the bone response to dietary calcium depletion and repletion, and in fracture repair is discussed. A potential coordinated regulatory relationship between the effect of osteocyte-derived IGF-I on bone size and the internal organ size is also proposed.

Use of perfusion bioreactors and large animal models for long bone tissue engineering

Tissue engineering and regenerative medicine (TERM) strategies for generation of new bone tissue includes the combined use of autologous or heterologous mesenchymal stem cells (MSC) and three-dimensional (3D) scaffold materials serving as structural support for the cells, that develop into tissue-like substitutes under appropriate in vitro culture conditions. This approach is very important due to the limitations and risks associated with autologous, as well as allogenic bone grafiting procedures currently used. However, the cultivation of osteoprogenitor cells in 3D scaffolds presents several challenges, such as the efficient transport of nutrient and oxygen and removal of waste products from the cells in the interior of the scaffold. In this context, perfusion bioreactor systems are key components for bone TERM, as many recent studies have shown that such systems can provide dynamic environments with enhanced diffusion of nutrients and therefore, perfusion can be used to generate grafts of clinically relevant sizes and shapes. Nevertheless, to determine whether a developed tissue-like substitute conforms to the requirements of biocompatibility, mechanical stability and safety, it must undergo rigorous testing both in vitro and in vivo. Results from in vitro studies can be difficult to extrapolate to the in vivo situation, and for this reason, the use of animal models is often an essential step in the testing of orthopedic implants before clinical use in humans. This review provides an overview of the concepts, advantages, and challenges associated with different types of perfusion bioreactor systems, particularly focusing on systems that may enable the generation of critical size tissue engineered constructs. Furthermore, this review discusses some of the most frequently used animal models, such as sheep and goats, to study the in vivo functionality of bone implant materials, in critical size defects.

Controlled release strategies for bone, cartilage, and osteochondral engineering--Part I: recapitulation of native tissue healing and variables for the design of delivery systems

The potential of growth factors to stimulate tissue healing through the enhancement of cell proliferation, migration, and differentiation is undeniable. However, critical parameters on the design of adequate carriers, such as uncontrolled spatiotemporal presence of bioactive factors, inadequate release profiles, and supraphysiological dosages of growth factors, have impaired the translation of these systems onto clinical practice. This review describes the healing cascades for bone, cartilage, and osteochondral interface, highlighting the role of specific growth factors for triggering the reactions leading to tissue regeneration. Critical criteria on the design of carriers for controlled release of bioactive factors are also reported, focusing on the need to provide a spatiotemporal control over the delivery and presentation of these molecules.

Release kinetics of platelet-derived and plasma-derived growth factors from autologous plasma rich in growth factors

Many studies have evaluated the biological effects of platelet rich plasma reporting the final outcomes on cell and tissues. However, few studies have dealt with the kinetics of growth factor delivery by plasma rich in growth factors. Venous blood was obtained from three healthy volunteers and processed with PRGF-Endoret technology to prepare autologous plasma rich in growth factors. The gel-like fibrin scaffolds were then incubated in triplicate, in a cell culture medium to monitor the release of PDGF-AB, VEGF, HGF and IGF-I during 8 days of incubation. A leukocyte-platelet rich plasma was prepared employing the same technology and the concentrations of growth factors and interleukin-1β were determined after 24h of incubation. After each period, the medium was collected, fibrin clot was destroyed and the supernatants were stored at -80°C until analysis. The growth factor delivery is diffusion controlled with a rapid initial release by 30% of the bioactive content after 1h of incubation and a steady state release when almost 70% of the growth factor content has been delivered. Autologous fibrin matrix retained almost 30% of the amount of the growth factors after 8 days of incubation. The addition of leukocytes to the formula of platelet rich plasma did not increase the concentration of the growth factors, while it drastically increased the presence of pro-inflammatory IL-1β. Further studies employing an in vitro inflammatory model would be interesting to study the difference in growth factors and pro-inflammatory cytokines between leukocyte-free and leukocyte-rich platelet rich plasma.

Insulin-like growth factor-I enhances proliferation and differentiation of human mesenchymal stromal cells in vitro

Human mesenchymal stromal cells (hMSCs) offer great potential for bone tissue engineering applications, but their in vivo performance remains limited. Preconditioning of these cells with small molecules to improve their differentiation before implantation, or incorporation of growth factors are possible solutions. Insulin-like growth factor-1 (IGF-1) is one of the most abundant growth factors in bone, involved in growth, development, and metabolism, but its effects on hMSCs are still subject of debate. Here we examined the effects of IGF-1 on proliferation and differentiation of hMSCs in vitro and we found that serum abolished the effects of IGF-1. Only in the absence of serum, IGF-1 increased proliferation, alkaline phosphatase expression, and osteogenic gene expression of hMSCs. Furthermore, we examined synergistic effects of bone morphogenetic protein-2 (BMP-2) and IGF-1 and, although IGF-1 enhanced BMP-2-induced mineralization, IGF-1 only slightly affected in vivo bone formation.

Localized delivery of growth factors for angiogenesis and bone formation in tissue engineering

Angiogenesis is a key component of bone formation. Delivery of growth factors for both angiogenesis and osteogenesis is about to gain important potential as a future therapeutic tool. This review focuses on these growth factors that have dual functions in angiogenesis and osteogenesis, and their localized application. A major hurdle in the clinical development of growth factor therapy so far is how to assure safe and efficacious therapeutic use of such factors and avoid unwanted side effects and toxicity. It is now firmly established from the available information that the type, dose, combinations and delivery kinetics of growth factors all play a decisive role for the success of growth factor therapy. All of these parameters have to be adapted and optimized for each animal model or clinical case. In this review we discuss some important parameters associated with growth factor therapy and present an overview of selected preclinical studies, followed by a conceptual description of both established and proposed delivery strategies meeting therapeutic needs.

Systemic treatment with vanadium absorbed by Coprinus comatus promotes femoral fracture healing in streptozotocin-diabetic rats

The purpose of this study was to analyze the impact of vanadium absorbed by Coprinus comatus (VACC) on fracture healing in streptozotocin-diabetic rats. Forty-five male Wistar rats used were divided into three groups: normal rats (control), diabetic rats, and diabetic rats treated with VACC. A standardized fracture-healing model with a stable plate fixation was established for the rat femoral fracture. After a 4-week stable fixation, callus quality was assessed by microcomputerized tomography and histological and biomechanical examinations. In addition, bone samples were obtained to evaluate the content of mineral substances in bones. Compared with the diabetic group, vanadium treatment significantly increased bone mineral content and biomechanical strength and improved microstructural properties of the callus. The ultimate load was increased by 29.1 % (P<0.05), and the total bone volume of callus enhanced by 11.2 % (P<0.05) at 4 weeks post fracture. Vanadium also promoted callus bone formation, which caused a 35.5 % increase in the total area of callus. However, VACC did not accelerate the fracture repair process in histological analysis. In conclusion, the current study suggests that systemic treatment with vanadium could promote fracture healing in streptozotocin-diabetic rats.

Controlled release strategies for bone, cartilage, and osteochondral engineering--Part II: challenges on the evolution from single to multiple bioactive factor delivery

The development of controlled release systems for the regeneration of bone, cartilage, and osteochondral interface is one of the hot topics in the field of tissue engineering and regenerative medicine. However, the majority of the developed systems consider only the release of a single growth factor, which is a limiting step for the success of the therapy. More recent studies have been focused on the design and tailoring of appropriate combinations of bioactive factors to match the desired goals regarding tissue regeneration. In fact, considering the complexity of extracellular matrix and the diversity of growth factors and cytokines involved in each biological response, it is expected that an appropriate combination of bioactive factors could lead to more successful outcomes in tissue regeneration. In this review, the evolution on the development of dual and multiple bioactive factor release systems for bone, cartilage, and osteochondral interface is overviewed, specifically the relevance of parameters such as dosage and spatiotemporal distribution of bioactive factors. A comprehensive collection of studies focused on the delivery of bioactive factors is also presented while highlighting the increasing impact of platelet-rich plasma as an autologous source of multiple growth factors.