A miniature biochip system for detection of aerosolized Bacillus globigii spores

Research advances in microfluidic collection and detection of virus, bacterial, and fungal bioaerosols

Bioaerosols are airborne suspensions of fine solid or liquid particles containing biological substances such as viruses, bacteria, cellular debris, fungal spores, mycelium, and byproducts of microbial metabolism. The global Coronavirus disease 2019 (COVID-19) pandemic and the previous emergence of severe acute respiratory syndrome (SARS), Middle East respiratory syndrome (MERS), and influenza have increased the need for reliable and effective monitoring tools for bioaerosols. Bioaerosol collection and detection have aroused considerable attention. Current bioaerosol sampling and detection techniques suffer from long response time, low sensitivity, and high costs, and these drawbacks have forced the development of novel monitoring strategies. Microfluidic technique is considered a breakthrough for high performance analysis of bioaerosols. In recent years, several emerging methods based on microfluidics have been developed and reported for collection and detection of bioaerosols. The unique advantages of microfluidic technique have enabled the integration of bioaerosol collection and detection, which has a higher efficiency over conventional methods. This review focused on the research progress of bioaerosol collection and detection methods based on microfluidic techniques, with special attention on virus aerosols and bacterial aerosols. Different from the existing reviews, this work took a unique perspective of the targets to be collected and detected in bioaerosols, which would provide a direct index of bioaerosol categories readers may be interested in. We also discussed integrated microfluidic monitoring system for bioaerosols. Additionally, the application of bioaerosol detection in biomedicine was presented. Finally, the current challenges in the field of bioaerosol monitoring are presented and an outlook given of future developments.

Detection of Microorganisms Using Artificial Siderophore-FeIII Complex-Modified Substrates

Four FeIII complexes of typical artificial siderophore ligands containing catecholate and/or hydroxamate groups of tricatecholate, biscatecholate-monohydroxamate, monocatecholate-bishydroxamate, and trihydroxamate type artificial siderophores (K3[FeIIILC3], K2[FeIIILC2H1], K[FeIIILC1H2], and [FeIIILH3]) were modified on Au substrate surfaces. Their abilities to adsorb microorganisms were investigated using scanning electron microscopy, quartz crystal microbalance, and AC impedance methods. The artificial siderophore-iron complexes modified on Au substrates (FeLC3/Au, FeLC2H1/Au, FeLC1H2/Au, and FeLH3/Au) showed the selective immobilization behavior for various microorganisms, depending on the structural features of the artificial siderophores (the number of catecholate and hydroxamate arms). Their specificities corresponded well with the structural characteristics of natural siderophores released by microorganisms and used for FeIII ion uptake. These findings suggest that they were generated via specific interactions between the artificial siderophore-FeIII complexes and the receptors on microorganism surfaces. Our observations revealed that the FeL/Au systems may be potentially used as effective microbe-capturing probes that can enable rapid and simple detection and identification of various microorganisms.

[Microorganism Immobilization Device Using Artificial Siderophores]

Inspired by the mechanism by which microorganisms utilize siderophores to ingest iron, four different FeIII complexes of typical artificial siderophore ligands containing catecholate and/or hydroxamate groups, K3[FeIII-LC3], K2[FeIII-LC2H1], K[FeIII-LC1H2], and [FeIII-LH3], were prepared. They were modified on an Au substrate surface (Fe-L/Au) and applied as microorganism immobilization devices for fast, sensitive, selective detection of microorganisms, where H6LC3, H5LC2H1, H4LC1H2, and H3LH3 denote the tri-catecholate, biscatecholate-monohydroxamate, monocatecholate-bishydroxamate, and tri-hydroxamate type of artificial siderophores, respectively. Their adsorption properties for the several microorganisms were investigated using scanning electron microscopy (SEM), quartz crystal microbalance (QCM), and electric impedance spectroscopy (EIS) methods. The artificial siderophore-iron complexes modified on the Au substrates Fe-LC3/Au, Fe-LC2H1/Au, Fe-LC1H2/Au, and Fe-LH3/Au showed specific microorganism immobilization behavior with selectivity based on the structure of the artificial siderophores. Their specificities corresponded well with the structural characteristics of natural siderophores that microorganisms release from the cell and/or use to take up an iron. These findings suggest that release and uptake are achieved through specific interactions between the artificial siderophore-FeIII complexes and receptors on the cell surfaces of microorganisms. This study revealed that Fe-L/Au systems have specific potential to serve as effective immobilization probes of microorganisms for rapid, selective detection and identification of a variety of microorganisms.

Acoustofluidic device for acoustic capture of Bacillus anthracis spore analogues at low concentration

A portable device for the rapid concentration of Bacillus subtilis var niger spores, also known as Bacillus globigii (BG), using a thin-reflector acoustofluidic configuration is described. BG spores form an important laboratory analog for the Bacillus anthracis spores, a serious health and bioterrorism risk. Existing systems for spore detection have limitations on detection time and detection that will benefit from the combination with this technology. Thin-reflector acoustofluidic devices can be cheaply and robustly manufactured and provide a more reliable acoustic force than previously explored quarter-wave resonator systems. The system uses the acoustic forces to drive spores carried in sample flows of 30 ml/h toward an antibody functionalized surface, which captures and immobilizes them. In this implementation, spores were fluorescently labeled and imaged. Detection at concentrations of 100 CFU/ml were demonstrated in an assay time of 10 min with 60% capture. We envisage future systems to incorporate more advanced detection of the concentrated spores, leading to rapid, sensitive detection in the presence of significant noise.

Bioaerosol emissions from activated sludge basins: Characterization, release, and attenuation

This article presents a critical review of the peer-reviewed literature related to bioaerosol generation from activated sludge basins. Characterization techniques include a variety of culture- and nonculture-based techniques, each with unique features. Bioaerosols contain a variety of clinical pathogens including Staphylococcus saprophyticus, Clostridium perfringens, and Salmonella enteritidis; exposure to these microorganisms increases human health risks. Release mechanisms involve splashing and bubble burst dynamics. Larger bubbles emit more aerosol particles than smaller ones. Attenuation strategies include covering sources with lids, adjusting the method and intensity of aeration, and using free-floating carrier media. Future studies should combine culture and non-culture based methods, and expand chemical databases and spectral libraries in order to realize the full power of real-time online monitoring.

A Low-Cost, Low-Power, Consumption Miniature Laser-Induced Fluorescence System for DNA Detection on a Microfluidic Device

With a focus on low-cost and low-power consumption, a miniature laser-induced fluorescence (LIF) detection system was assembled using a 635 nm red diode laser as the excitation source and a photodiode element coupled with an operational amplifier for signal collection. The primary elements of the miniature system, namely the laser and the detection system, cost a combined $70 and required only 270 mW of power for operation. When compared to conventional systems assembled using an argon-ion laser source and a photomultiplier tube, this represents a 98% decrease in the cost, and greater than 5000-fold decrease in power consumption. Limits of detection (LOD) and quantitation (LOQ) of the miniature system, evaluated on a microfluidic device for Nile Blue dye diluted in ethanol, were approximately 15 and 40 nM, respectively. Detection of λ-phage DNA on a microfluidic device using the miniature system was performed after mixing with an intercalating dye, TO-PRO 3. The LOD and LOQ of λ-phage DNA after TO-PRO 3 intercalation were approximately 1 and 4 ng/μL, respectively. Quantitation of DNA on microdevices using the miniature LIF detection system was also performed with an error of less than 15%. This detection system is a step in the direction of commercializing microfluidic instrumentation by reducing the cost and power required for operation. (JALA 2006;11:254–9)

Integrated micro-optofluidic platform for real-time detection of airborne microorganisms

We demonstrate an integrated micro-optofluidic platform for real-time, continuous detection and quantification of airborne microorganisms. Measurements of the fluorescence and light scattering from single particles in a microfluidic channel are used to determine the total particle number concentration and the microorganism number concentration in real-time. The system performance is examined by evaluating standard particle measurements with various sample flow rates and the ratios of fluorescent to non-fluorescent particles. To apply this method to real-time detection of airborne microorganisms, airborne Escherichia coli, Bacillus subtilis, and Staphylococcus epidermidis cells were introduced into the micro-optofluidic platform via bioaerosol generation, and a liquid-type particle collection setup was used. We demonstrate successful discrimination of SYTO82-dyed fluorescent bacterial cells from other residue particles in a continuous and real-time manner. In comparison with traditional microscopy cell counting and colony culture methods, this micro-optofluidic platform is not only more accurate in terms of the detection efficiency for airborne microorganisms but it also provides additional information on the total particle number concentration.

Assessing the Sporicidal Activity of Oligo-p-phenylene Ethynylenes and Their Role as Bacillus Germinants

A wide range of oligo-p-phenylene ethynylenes has been shown to exhibit good biocidal activity against both Gram-negative and Gram-positive bacteria. While cell death may occur in the dark, these biocidal compounds are far more effective in the light as a result of their ability to sensitize the production of cell-damaging reactive oxygen species. In these studies, the interactions of a specific cationic oligo-p-phenylene ethynylene with spore-forming Bacillus atrophaeus and Bacillus anthracis Sterne have been investigated. Flow cytometry assays are used to rapidly monitor cell death as well as spore germination. This compound effectively killed Bacillus anthracis Sterne vegetative cells (over 4 log reduction), presumably by severe perturbations of the bacterial cell wall and cytoplasmic membrane, while also acting as an effective spore germinant in the dark. While 2 log reduction of B. anthracis Sterne spores was observed, it is hypothesized that further killing could be achieved through enhanced germination.

A fluorogenic heterogeneous immunoassay for cardiac muscle troponin cTnI on a digital microfluidic device

We describe a fluorogenic two-site noncompetitive heterogeneous immunoassay with magnetic beads on a low-voltage digital microfluidic platform using closed electrowetting-on-dielectric (EWOD). All the steps of an enzyme-linked immunosorbent assay (ELISA) were performed on the device using 9H-(1, 3-dichloro-9, 9-dimethylacridin-2-one-7-yl) phosphate as the fluorogenic substrate for the enzyme alkaline phosphatase. The performance of the system was demonstrated with cardiac marker Troponin I (cTnI) as a model analyte in phosphate-buffered saline samples. cTnI was detected within the diagnostically relevant range with a limit of detection of 2.0 ng/mL (CV = 6.47 %). Washing of magnetic beads was achieved by movement through a narrow region of buffer bridging one drop to another with minimal fluid transfer. More than 90 % of the unbound reagents were removed after five washes. Further experiments testing human blood serum on the same platform demonstrated a sample-to-answer time at ∼18.5 min detecting 6.79 ng/mL cTnI.

Cellphone camera imaging of a periodically patterned chip as a potential method for point-of-care diagnostics

In this study, we demonstrate that a disposable chip periodically patterned with suitable ligands, an ordinary cellphone camera, and a simple pattern recognition software, can potentially be used for quantitative diagnostics. A key factor in this demonstration is the design of a calibration grid around the chip that, through a contrast transfer process, enables reliable analysis of the images collected under variable ambient lighting conditions. After exposure to a dispersion of amine terminated silica beads used as analyte mimicking pathogens, an epoxy-terminated glass substrate microcontact printed with octadecyltrichlorosilane (250 μm periodicity) developed a characteristic pattern of beads which could be easily imaged with a cellphone camera of 3.2 MP pixels. A simple pattern recognition algorithm using fast Fourier transform produced a quantitative estimate of the analyte concentration present in the test solution. In this method importantly, neither the chip fabrication process nor the fill-factor of the periodic pattern need be perfect to arrive at a conclusive diagnosis. The method suggests a viable platform that may potentially find use in fault-tolerant and robust point-of-care diagnostic applications.

Quantitative and sensitive RNA based detection of Bacillus spores

The fast and reliable detection of bacterial spores is of great importance and still remains a challenge. Here we describe a direct RNA-based diagnostic method for the specific detection of viable bacterial spores which does not depends on an enzymatic amplification step and therefore is directly appropriate for quantification. The procedure includes the following steps: (i) heat activation of spores, (ii) germination and enrichment cultivation, (iii) cell lysis, and (iv) analysis of 16S rRNA in crude cell lysates using a sandwich hybridization assay. The sensitivity of the method is dependent on the cultivation time and the detection limit; it is possible to detect 10 spores per ml when the RNA analysis is performed after 6 h of enrichment cultivation. At spore concentrations above 10(6) spores per ml the cultivation time can be shortened to 30 min. Total analysis times are in the range of 2-8 h depending on the spore concentration in samples. The developed procedure is optimized at the example of Bacillus subtilis spores but should be applicable to other organisms. The new method can easily be modified for other target RNAs and is suitable for specific detection of spores from known groups of organisms.

Real-time detection of an airborne microorganism using inertial impaction and mini-fluorescent microscopy

To achieve successful real-time detection of airborne pathogenic microorganisms, the problem must be considered in terms of their physical size and biological characteristics. We developed an airborne microorganism detection chip to realize the detection of microorganisms, ensuring compactness, sensitivity, cost-efficiency, and portability, using three key components: an inertial impaction system, a cartridge-type impaction plate, and a mini-fluorescent microscope. The inertial impaction system was used to separate microorganisms in terms of their aerodynamic particle size, and was fabricated with three impaction stages. Numerical analysis was performed to design the system; the calculated cutoff diameter at each impaction stage was 2.02 (first stage), 0.88 (second stage), and 0.54 μm (third stage). The measured cutoff diameters were 2.24, 0.91, and 0.49 μm, respectively. A cartridge-type impaction plate was used, composed of molded polydimethylsiloxane (PDMS) and an actual impaction region made of a SYBR green I dye-stained agar plate. A mini-fluorescent microscope was used to distinguish microbes from non-biological particles. Images of the microorganisms deposited at the impaction zone were obtained via mini-fluorescent microscopy, and fluorescent intensities of the images were calculated using in-house image-processing software. The results showed that the developed system successfully identified aerosolized biological particles from non-biological particles in real time.

Integrated microspectrometer for fluorescence based analysis in a microfluidic format

We have demonstrated a monolithic integrated arrayed waveguide grating (AWG) microspectrometer microfluidic platform capable of fluorescence spectroscopic analysis. The microspectrometer in this proof of concept study has a small (1 cm × 1 cm) footprint and 8 output channels centred on different wavelengths. We show that the signals from the output channels detected on a camera chip can be used to recreate the complete fluorescence spectrum of an analyte. By making fluorescence measurements of (i) mixed quantum dot solutions, (ii) an organic fluorophore (Cy5) and (iii) the propidium iodide (PI)-DNA assay, we illustrate the unique advantages of the AWG platform for simultaneous, quantitative multiplex detection and its capability to detect small spectroscopic shifts. Although the current system is designed for fluorescence spectroscopic analysis, in principle, it can be implemented for other types of analysis, such as Raman spectroscopy. Fabricated using established semiconductor industry methods, this miniaturised platform holds great potential to create a handheld, low cost biosensor with versatile detection capability.

Label-free detection of a bacterial pathogen using an immobilized siderophore, deferoxamine

Pathogenic bacteria obtain the iron necessary for survival by releasing an iron chelator, termed a siderophore, and retrieving the iron-siderophore complex via a cell surface siderophore receptor. We have exploited the high affinity of Yersinia enterocolitica for its siderophore, deferoxamine, to develop a rapid method for capture and identification of Yersinia. In this methodology, a deferoxamine-bovine serum albumin conjugate is printed onto a gold-plated chip in a parallel line pattern. After flowing a suspension of Yersinia across the siderophore-derivatized chip, any Yersinia that binds to the chip is detected by dark-field microscopy analysis of the scattered light, followed by Fourier transform analysis of the scattering pattern. Since peak intensities are found to correlate with pathogen concentration, pathogen titers as low as 10(3) cfu/ml can be readily detected. Moreover, immobilized deferoxamine can distinguish Y. enterocolitica, which binds ferrioxamine (deferoxamine-Fe), from Staphylococcus aureus, Mycobacterium smegmatis and Pseudomonas aeruginosa, which don't. Because human pathogens cannot easily mutate their iron retrieval systems without loss of viability, we suggest that few if any mutant Yersinia will emerge that can avoid detection. Together with previous results demonstrating selective capture of Pseudomonas aeruginosa by its immobilized siderophore (pyoverdin), these data suggest that pathogen-specific siderophores may constitute effective and immutable capture ligands for rapid detection and identification of their cognate pathogens.

Amyloid histology stain for rapid bacterial endospore imaging

Bacterial endospores are some of the most resilient forms of life known to us, with their persistent survival capability resulting from a complex and effective structural organization. The outer membrane of endospores is surrounded by the densely packed endospore coat and exosporium, containing amyloid or amyloid-like proteins. In fact, it is the impenetrable composition of the endospore coat and the exosporium that makes staining methodologies for endospore detection complex and challenging. Therefore, a plausible strategy for facile and expedient staining would be to target components of the protective surface layers of the endospores. Instead of targeting endogenous markers encapsulated in the spores, here we demonstrated staining of these dormant life entities that targets the amyloid domains, i.e., the very surface components that make the coats of these species impenetrable. Using an amyloid staining dye, thioflavin T (ThT), we examined this strategy. A short incubation of bacillus endospore suspensions with ThT, under ambient conditions, resulted in (i) an enhancement of the fluorescence of ThT and (ii) the accumulation of ThT in the endospores, affording fluorescence images with excellent contrast ratios. Fluorescence images revealed that ThT tends to accumulate in the surface regions of the endospores. The observed fluorescence enhancement and dye accumulation, coupled with the sensitivity of emission techniques, provide an effective and rapid means of staining endospores without the inconvenience of pre- or posttreatment of samples.

Genomic signatures of strain selection and enhancement in Bacillus atrophaeus var. globigii, a historical biowarfare simulant

BACKGROUND

Despite the decades-long use of Bacillus atrophaeus var. globigii (BG) as a simulant for biological warfare (BW) agents, knowledge of its genome composition is limited. Furthermore, the ability to differentiate signatures of deliberate adaptation and selection from natural variation is lacking for most bacterial agents. We characterized a lineage of BGwith a long history of use as a simulant for BW operations, focusing on classical bacteriological markers, metabolic profiling and whole-genome shotgun sequencing (WGS).

RESULTS

Archival strains and two "present day" type strains were compared to simulant strains on different laboratory media. Several of the samples produced multiple colony morphotypes that differed from that of an archival isolate. To trace the microevolutionary history of these isolates, we obtained WGS data for several archival and present-day strains and morphotypes. Bacillus-wide phylogenetic analysis identified B. subtilis as the nearest neighbor to B. atrophaeus. The genome of B. atrophaeus is, on average, 86% identical to B. subtilis on the nucleotide level. WGS of variants revealed that several strains were mixed but highly related populations and uncovered a progressive accumulation of mutations among the "military" isolates. Metabolic profiling and microscopic examination of bacterial cultures revealed enhanced growth of "military" isolates on lactate-containing media, and showed that the "military" strains exhibited a hypersporulating phenotype.

CONCLUSIONS

Our analysis revealed the genomic and phenotypic signatures of strain adaptation and deliberate selection for traits that were desirable in a simulant organism. Together, these results demonstrate the power of whole-genome and modern systems-level approaches to characterize microbial lineages to develop and validate forensic markers for strain discrimination and reveal signatures of deliberate adaptation.

Microbead-based immunoassay for simultaneous detection of Shiga toxins and isolation of Escherichia coli O157 in foods

Shiga toxin-producing Escherichia coli (STEC) is a significant foodborne pathogen with great economic consequences. There has been an increased food safety concern with this organism since outbreaks of human illnesses caused by this pathogen were first reported in 1982. Therefore, developing a reliable, sensitive, and rapid assay capable of detecting E. coli O157 and the main toxins produced by STEC (i.e., Shiga toxins 1 [Stx(1)] and 2 [Stx(2)]) will directly benefit regulatory agencies by minimizing analysis time. Here, we use Luminex technology to detect multiple analytes in a single 50-ml sample. Using commercially available monoclonal antibodies coupled to carboxylated magnetic microbeads, we developed an immunoassay capable of simultaneously serotyping E. coli O157 and detecting Stx(1) and/or Stx(2). The specificity and sensitivity of this immunoassay was tested against a collection of 34 E. coli isolates belonging to various O serogroups phenotypically different for Stx. The results were compared with microplate sandwich enzyme-linked immunosorbent assay (ELISA), and no cross-reactivity was observed for any of the monoclonal antibodies used. An increased sensitivity up to 1,000 times was observed in the microbead-based immunoassay when compared with the microplate sandwich ELISA. The results indicate that Luminex technology has the potential to simultaneously detect multiple targets without loss of specificity and/or sensitivity. A blind experiment was conducted with 48 samples of ground beef, lettuce, and milk spiked with ≤2 CFU/g E. coli. All the samples were correctly identified, with no false positives or false negatives. This microbead-based immunoassay could be extended to simultaneously detect additional foodborne pathogens and their toxic markers.

Comparison of air sampling methods for aerosolized spores of B. anthracis Sterne

Bacillus anthracis Sterne spores were aerosolized within a chamber at concentrations ranging from 1 x 10³ to 1.7 x 10⁴ spores per cubic meter of air (particles (p)/m³) to compare three different sampling methods: Andersen samplers, gelatin filters, and polytetrafluoroethylene (PTFE) membrane filters. Three samples of each type were collected during each of 19 chamber runs. Chamber concentration was determined by an aerodynamic particle sizer (APS) for the size range of 1.114-1.596 μm. Runs were categorized (low, medium, and high) based on tertiles of the APS estimated air concentrations. Measured air concentrations and recovery efficiency [ratio of the measured (colony forming units (CFU)/m³) to the APS estimated (particles/m³) air concentrations] for the sampling methods were compared using mixed-effects regression models. Limits of detection for each method were estimated based on estimated recovery efficiencies. Mean APS estimated air concentrations were 1600 particles/m³, 4100 particles/m³, and 9100 particles/m³ at the low, medium, and high tertiles, respectively; coefficient of variation (CV) ranged from 25 to 40%. Statistically significant differences were not observed among the three sampling methods. At the high and medium tertiles, estimated correlations of measured air concentration (CFU/m³) among samples collected from the same run of the same type were high (0.73 to 0.93). Among samples collected from the same run but of different types, correlations were moderate to high (0.45 to 0.85); however, correlations were somewhat lower at the low tertile (-0.31 to 0.75). Estimated mean recovery efficiencies ranged from 0.22 to 0.25 CFU/particle with total CVs of approximately 84 to 97%. Estimated detection limits ranged from 35 to 39 particles/m³. These results will enable investigators to conduct environmental sampling, quantify contamination levels, and conduct risk assessments of B. anthracis.

Identifying experimental surrogates for Bacillus anthracis spores: a review

Bacillus anthracis, the causative agent of anthrax, is a proven biological weapon. In order to study this threat, a number of experimental surrogates have been used over the past 70 years. However, not all surrogates are appropriate for B. anthracis, especially when investigating transport, fate and survival. Although B. atrophaeus has been widely used as a B. anthracis surrogate, the two species do not always behave identically in transport and survival models. Therefore, we devised a scheme to identify a more appropriate surrogate for B. anthracis. Our selection criteria included risk of use (pathogenicity), phylogenetic relationship, morphology and comparative survivability when challenged with biocides. Although our knowledge of certain parameters remains incomplete, especially with regards to comparisons of spore longevity under natural conditions, we found that B. thuringiensis provided the best overall fit as a non-pathogenic surrogate for B. anthracis. Thus, we suggest focusing on this surrogate in future experiments of spore fate and transport modelling.

Implications of limits of detection of various methods for Bacillus anthracis in computing risks to human health

Used for decades for biological warfare, Bacillus anthracis (category A agent) has proven to be highly stable and lethal. Quantitative risk assessment modeling requires descriptive statistics of the limit of detection to assist in defining the exposure. Furthermore, the sensitivities of various detection methods in environmental matrices are vital information for first responders. A literature review of peer-reviewed journal articles related to methods for detection of B. anthracis was undertaken. Articles focused on the development or evaluation of various detection approaches, such as PCR, real-time PCR, immunoassay, etc. Real-time PCR and PCR were the most sensitive methods for the detection of B. anthracis, with median instrument limits of detection of 430 and 440 cells/ml, respectively. There were very few peer-reviewed articles on the detection methods for B. anthracis in the environment. The most sensitive limits of detection for the environmental samples were 0.1 CFU/g for soil using PCR-enzyme-linked immunosorbent assay (ELISA), 17 CFU/liter for air using an ELISA-biochip system, 1 CFU/liter for water using cultivation, and 1 CFU/cm(2) for stainless steel fomites using cultivation. An exponential dose-response model for the inhalation of B. anthracis estimates of risk at concentrations equal to the environmental limit of detection determined the probability of death if untreated to be as high as 0.520. Though more data on the environmental limit of detection would improve the assumptions made for the risk assessment, this study's quantification of the risk posed by current limitations in the knowledge of detection methods should be considered when employing those methods in environmental monitoring and cleanup strategies.

Intensified biochip system using chemiluminescence for the detection of Bacillus globigii spores

This paper reports the first intensified biochip system for chemiluminescence detection and the feasibility of using this system for the analysis of biological warfare agents is demonstrated. An enzyme-linked immunosorbent assay targeting Bacillus globigii spores, a surrogate species for Bacillus anthracis, using a chemiluminescent alkaline phosphatase substrate is combined with a compact intensified biochip detection system. The enzymatic amplification was found to be an attractive method for detection of low spore concentrations when combined with the intensified biochip device. This system was capable of detecting approximately 1 x 10(5) Bacillus globigii spores. Moreover, the chemiluminescence method, combined with the self-contained biochip design, allows for a simple, compact system that does not require laser excitation and is readily adaptable to field use.

Holographic sensors for the detection of bacterial spores

Holographic sensors for the detection of Bacillus species spore germination and vegetative growth are described. Reflection holograms were fabricated using a diffusion method for the distribution of ultra-fine silver bromide grains into pre-formed polymer films, followed by holographic recording using a frequency doubled Nd:YAG (532 nm) laser. Changes in holographic replay wavelength or diffraction intensity were used to characterise the swelling behaviour or structural integrity of a range of holographic matrices in response to various extracellular products of bacterial spore germination and vegetative metabolism. Divalent metal ion-sensitive holograms containing a methacrylated analogue of nitrilotriacetic acid (NTA) as the chelating monomer were successfully used to monitor Ca2+ ions released during B. subtilis spore germination in real-time, which was within minutes of sample addition; the holographic response manifested as a 16 nm blue-shift in diffraction wavelength over the progress of germination. Similarly, pH-sensitive holograms comprising methacrylic acid (MAA) as the ionisable monomer were responsive to changes in pH associated with early vegetative metabolism following germination of B. megaterium spores; a visually perceptible blue-shift in holographic replay wavelength of 75 nm was observed. Casein and starch-based holographic matrices, prepared by co-polymerisation of the appropriate substrate with acrylamide, were used to detect exo-enzymes released during later stages of B. megaterium and B. subtilis vegetative cell growth; holographic responses of both matrices were visible as a reduction in diffraction intensity due to progressive fringe disruption caused by enzymatic cleavage. The combined monitoring of various germination and growth events using the range of aforementioned holographic sensors provides a novel, comprehensive means for the detection of viable bacterial spores.

AC electrothermal enhancement of heterogeneous assays in microfluidics

AC-driven electrothermal flow is used to enhance the temporal performance of heterogeneous immuno-sensors in microfluidic systems by nearly an order of magnitude. AC electrokinetic forces are used to generate electrothermal flow, which in turn produces a circular stirring fluid motion that enhances the transport of diffusion-limited proteins. This provides more binding opportunities between suspended antigens and wall-immobilized antibodies. We investigate experimentally the effectiveness of electrothermal stirring, using a biotin-streptavidin heterogeneous assay, in which biotin is immobilized, and fluorescently-labeled streptavidin is suspended in a high conductivity buffer (sigma = 1.0 S m(-1)). Microfabricated electrodes were integrated within a microwell and driven at a frequency of f= 200 kHz and 10 V(rms). Fluorescent intensity measurements show that for a five minute assay, electrothermal stirring increases the binding rate by a factor of almost nine. Similar binding improvement was measured for longer assays, up to fifteen minutes. The electrothermal enhancement of this assay was modeled numerically and agrees with experimental binding rates. The measured fluid velocity of 22 +/- 2 microm s(-1) was significantly lower than that predicted by the numerical model, 1.1 mm s(-1), but nevertheless shows the same fourth power dependence on applied potential. The results demonstrate the ability for electrothermal stirring to reliably improve the response time and sensitivity within a given time limit for microfluidic diffusion-limited sensors.

Quantification of magnetic susceptibility in several strains of Bacillus spores: implications for separation and detection

Three strains of Bacillus: Bacillus atrophaeus (formally Bacillus globigii), Bacillus thuringiensis, and Bacillus cereus were tested for their intrinsic magnetic susceptibility. All three strains when sporulated demonstrated significant magnetic susceptibility using an instrument referred to as Cell Tracking Velocimetry. Energy dispersive spectroscopy also confirmed the presence of paramagnetic elements, Fe and Mn, in the spore form of the bacteria. It was demonstrated that this magnetic susceptibility is sufficient to separate and deposit these spores on glass slides in a magnetic deposition system. These results indicate the potential to separate spores with intrinsic magnetic susceptibility directly out of water or air samples.

Development of quantitative real-time PCR assays for detection and quantification of surrogate biological warfare agents in building debris and leachate

Evaluation of the fate and transport of biological warfare (BW) agents in landfills requires the development of specific and sensitive detection assays. The objective of the current study was to develop and validate SYBR green quantitative real-time PCR (Q-PCR) assays for the specific detection and quantification of surrogate BW agents in synthetic building debris (SBD) and leachate. Bacillus atrophaeus (vegetative cells and spores) and Serratia marcescens were used as surrogates for Bacillus anthracis (anthrax) and Yersinia pestis (plague), respectively. The targets for SYBR green Q-PCR assays were the 16S-23S rRNA intergenic transcribed spacer (ITS) region and recA gene for B. atrophaeus and the gyrB, wzm, and recA genes for S. marcescens. All assays showed high specificity when tested against 5 ng of closely related Bacillus and Serratia nontarget DNA from 21 organisms. Several spore lysis methods that include a combination of one or more of freeze-thaw cycles, chemical lysis, hot detergent treatment, bead beat homogenization, and sonication were evaluated. All methods tested showed similar threshold cycle values. The limit of detection of the developed Q-PCR assays was determined using DNA extracted from a pure bacterial culture and DNA extracted from sterile water, leachate, and SBD samples spiked with increasing quantities of surrogates. The limit of detection for B. atrophaeus genomic DNA using the ITS and B. atrophaeus recA Q-PCR assays was 7.5 fg per PCR. The limits of detection of S. marcescens genomic DNA using the gyrB, wzm, and S. marcescens recA Q-PCR assays were 7.5 fg, 75 fg, and 7.5 fg per PCR, respectively. Quantification of B. atrophaeus vegetative cells and spores was linear (R(2) > 0.98) over a 7-log-unit dynamic range down to 10(1) B. atrophaeus cells or spores. Quantification of S. marcescens (R(2) > 0.98) was linear over a 6-log-unit dynamic range down to 10(2) S. marcescens cells. The developed Q-PCR assays are highly specific and sensitive and can be used for monitoring the fate and transport of the BW surrogates B. atrophaeus and S. marcescens in building debris and leachate.

A Low-Cost, Low-Power Consumption, Miniature Laser-Induced Fluorescence System for DNA Detection on a Microfluidic Device

With a focus on low-cost and low-power consumption, a miniature laser-induced fluorescence (LIF) detection system was assembled using a 635 nm red diode laser as the excitation source and a photodiode element coupled with an operational amplifier for signal collection. The primary elements of the miniature system, namely the laser and the detection system, cost a combined $70 and required only 270 mW of power for operation. When compared to conventional systems assembled using an argon-ion laser source and a photomultiplier tube, this represents a 98% decrease in the cost, and greater than 5000-fold decrease in power consumption. Quantitation of DNA on microdevices using the miniature LIF detection system was also performed with an error of less than 15%. This detection system is a step in the direction of commercializing microfluidic instrumentation by reducing the cost and power required for operation.

Development of a novel DNA chip based on a bipolar semiconductor microchip system

We have applied an integrated circuit photodiode array (PDA) chip system to a DNA chip. The PDA chip system, constructed using conventional bipolar semiconductor technology, acts as a solid transducer surface as well as a two-dimensional photodetector. DNA hybridization was performed directly on the PDA chip. The target DNA, the Bacillus subtilis sspE gene, was amplified by polymerase chain reaction (PCR). The 340-bp PCR product was labeled using digoxigenin (DIG). A silicon nitride layer on the photodiode was treated with poly-L-lysine to immobilize the DNA on the surface of the photodiode detection elements. Consequently, the surface of the photodiode detector became positively charged. An anti-DIG-alkaline phosphatase conjugate was reacted with the hybridized DIG-labeled DNA. A color reaction was performed based on the enzymatic reaction between nitroblue tetrazolium/5-bromo-4-chloro-3-indolyl-phosphate (NBT/BCIP) staining solution and a DNA complex containing antibodies. A blue precipitate was formed on the surfaces of the photodiode detection elements. Successful quantitative analysis of the hybridized PCR products was achieved from the light absorption properties of the blue enzymatic reaction product that was produced after a series of reaction processes. Our DNA chip system avoids the complicated optical alignments and light-collecting optical components that are usually required for an optical DNA chip device. As a result, a simple, compact, portable and low-cost DNA chip is achieved. This system has great potential as an alternative system to the conventional DNA reader.

Rapid identification, virulence analysis and resistance profiling of Staphylococcus aureus by gene segment-based DNA microarrays: application to blood culture post-processing

Up to now, blood culturing systems are the method of choice to diagnose bacteremia. However, definitive pathogen identification from positive blood cultures is a time-consuming procedure, requiring subculture and biochemical analysis. We developed a microarray for the identification of Staphylococcus aureus comprising PCR generated gene-segments, which can reduce the blood culture post-processing time to a single day. Moreover, it allows concomitant identification of virulence factors and antibiotic resistance determinants directly from positive blood cultures without previous amplification by PCR. The assay unambiguously identifies most of the important virulence genes such as tsst-1, sea, seb, eta and antibiotic resistance genes such as mecA, aacA-aphD, blaZ and ermA. To obtain positive signals, 20 ng of purified genomic S. aureus DNA or 2 microg of total DNA extracted from blood culture was required. The microarray specifically distinguished S. aureus from gram-negative bacteria as well as from closely related coagulase negative staphylococci (CoNS). The microarray-based identification of S. aureus can be accomplished on the same day blood cultures become positive in the Bactec. The results of our study demonstrate the feasibility of microarray-based systems for the direct identification and characterization of bacteria from cultured clinical specimens.

Molecular techniques in wastewater: Understanding microbial communities, detecting pathogens, and real-time process control

Traditionally, the detection of pathogens in water, wastewater, and other environmental samples is restricted by the ability to culture such organisms from complex environmental samples. During the last decade the use of molecular methods have supplied the means for examining microbial diversity and detecting specific organisms without the need for cultivation. The application of molecular techniques to the study of natural and engineered environmental systems has increased our insight into the vast diversity and interaction of microorganisms present in complex environments. In this paper, we will review the current and emerging molecular approaches for characterizing microbial community composition and structure in wastewater processes. Recent studies show that advances in microarray assays are increasing our capability of detecting hundreds and even thousands of DNA sequences simultaneously and rapidly. With the current progress in microfluidics and optoelectronics, the ability to automate a detection/identification system is now being realized. The status of such a system for wastewater monitoring is discussed.

Recent developments in bio-molecular electronics techniques for food pathogens

Food borne illnesses contribute to the majority of infections caused by pathogenic microorganisms. Detection of these pathogens originating from different sources has led to increased interest of researchers. New bio-molecular techniques for food pathogen detection are being developed to improve the sensor characteristics such as sensitivity, reusability, simplicity and economic viability. Present article deals with the various methods of food pathogen detection with special emphasis on bio-molecular electronics techniques such as biosensors, microarrays, electronic nose, and nano-materials based methods.

Bacillus anthracis: toxicology, epidemiology and current rapid-detection methods

B. anthracis, the causative agent for anthrax, has been well studied for over 150 years. Due to the genetic similarities among various Bacillus species, as well as its existence in both a spore form and a vegetative state, the detection and specific identification of B. anthracis have been proven to require complex techniques and/or laborious methods. With the heightened interest in the organism as a potential biological threat agent, a large number of interesting detection technologies have recently been developed, including methods involving immunological and nucleic acid-based assay formats. The technologies range from culture-based methods to portable Total Analysis Systems based on real-time PCR. This review with 170 references provides a brief background on the toxicology and epidemiology of B. anthracis, discusses challenges associated with its detection related to genetic similarities to other species, and reviews immunological and, with greater emphasis, nucleic acid-based detection systems.

Spore and micro-particle capture on an immunosensor surface in an ultrasound standing wave system

The capture of Bacillus subtilis var. niger spores on an antibody-coated surface can be enhanced when that coated surface acts as an acoustic reflector in a quarter wavelength ultrasonic (3 MHz) standing wave resonator. Immunocapture in such a resonator has been characterised here for both spores and 1 microm diameter biotinylated fluorescent microparticles. A mean spatial acoustic pressure amplitude of 460 kPa and a frequency of 2.82 MHz gave high capture efficiencies. It was shown that capture was critically dependent on reflector thickness. The time dependence of particle deposition on a reflector in a batch system was broadly consistent with a calculated time of 35 s to bring 95% of particles to the coated surface. A suspension flow rate of 0.1 ml/min and a reflector thickness of 1.01 mm gave optimal capture in a 2 min assay. The enhancement of particle detection compared with the control (no ultrasound) situation was x 70. The system detects a total of five particles in 15 fields of view in a 2 min assay when the suspending phase concentration was 10(4) particles/ml. A general expression for the dependence of minimum concentration detectable on; number of fields examined, sample volume flowing through the chamber and assay time shows that, for a practical combination of these variables, the threshold detection concentration can be two orders of magnitude lower.

Current and developing technologies for monitoring agents of bioterrorism and biowarfare

Recent events have made public health officials acutely aware of the importance of rapidly and accurately detecting acts of bioterrorism. Because bioterrorism is difficult to predict or prevent, reliable platforms to rapidly detect and identify biothreat agents are important to minimize the spread of these agents and to protect the public health. These platforms must not only be sensitive and specific, but must also be able to accurately detect a variety of pathogens, including modified or previously uncharacterized agents, directly from complex sample matrices. Various commercial tests utilizing biochemical, immunological, nucleic acid, and bioluminescence procedures are currently available to identify biological threat agents. Newer tests have also been developed to identify such agents using aptamers, biochips, evanescent wave biosensors, cantilevers, living cells, and other innovative technologies. This review describes these current and developing technologies and considers challenges to rapid, accurate detection of biothreat agents. Although there is no ideal platform, many of these technologies have proved invaluable for the detection and identification of biothreat agents.

Evanescent wave fluorescence biosensors

Since discovery and first use in the mid-1970s, evanescent wave fluorescence biosensors have developed into a diverse range of instruments, each designed to meet a particular detection need. In this review, we provide a brief synopsis of what evanescent wave fluorescence biosensors are, how they work, and how they are used. In addition, we have summarized the important patents that have impacted the evolution from laboratory curiosities to fully automated commercial products. Finally, we address the critical issues that evanescent wave fluorescence biosensors will face in the coming years.

APDS: the autonomous pathogen detection system

We have developed and tested a fully autonomous pathogen detection system (APDS) capable of continuously monitoring the environment for airborne biological threat agents. The system was developed to provide early warning to civilians in the event of a bioterrorism incident and can be used at high profile events for short-term, intensive monitoring or in major public buildings or transportation nodes for long-term monitoring. The APDS is completely automated, offering continuous aerosol sampling, in-line sample preparation fluidics, multiplexed detection and identification immunoassays, and nucleic acid-based polymerase chain reaction (PCR) amplification and detection. Highly multiplexed antibody-based and duplex nucleic acid-based assays are combined to reduce false positives to a very low level, lower reagent costs, and significantly expand the detection capabilities of this biosensor. This article provides an overview of the current design and operation of the APDS. Certain sub-components of the ADPS are described in detail, including the aerosol collector, the automated sample preparation module that performs multiplexed immunoassays with confirmatory PCR, and the data monitoring and communications system. Data obtained from an APDS that operated continuously for 7 days in a major U.S. transportation hub is reported.

Laser induced disruption of bacterial spores on a microchip

We report on the development of a laser based spore disruption method. Bacillus globigii spores were mixed with a laser light absorbing matrix and co-crystallized into 200-microm-wide and 20-microm-deep nanovials formed in a polydimethylsiloxane (PDMS) target plate. Surface tension effects were exploited to effect up to 125-fold spore enrichment. When the target zones were illuminated at atmospheric pressure with pulsed UV-laser light at fluences below 20 mJ cm(-2) a change in spore morphology was observed within seconds. Post illumination PCR analysis suggests the release of endogenous DNA indicative of spore disruption. For laser fluences above 20 mJ cm(-2), desorption of spores and fragments was also observed even without a matrix being employed. Desorbed material was collected in a PDMS flowcell attached to the target plate during laser illumination. This opens up a route towards the direct extraction of released DNA in an integrated spore disruption-PCR amplification microchip device.

Environmental health research in the post-genome era: new fields, new challenges, and new opportunities

The human genome sequence provides researchers with a genetic framework to eventually understand the relationships of gene-environment interactions. This wealth of information has led to the birth of several related areas of research, including proteomics, functional genomics, pharmacogenomics, and toxicogenomics. Developing techniques such as DNA/protein microarrays, small-interfering RNA (siRNA) applications, two-dimensional gel electrophoresis, and mass spectrometry in conjunction with advanced analysis software and the availability of Internet databases offers a powerful set of tools to investigate an individual's response to specific stimuli. This review summarizes these emerging scientific fields and techniques focusing specifically on their applications to the complexities of gene-environment interactions and their potential role in environ-mental biosecurity.

Intensities of calcium dipicolinate and Bacillus subtilis spore Raman spectra excited with 244 nm light

Ultraviolet (UV) resonance Raman spectra of Bacillus subtilis endospores have been excited at 244 nm. Spectra can be interpreted in terms of contributions from calcium dipicolinate and nucleic acid components. Differences between spectra of spores and vegetative cells are very large and are due to the dominance of the dipicolinate features in the spore spectra. Because the DNA and RNA composition of B. subtilis spores is known and because the cross-sections of Raman bands belonging to DNA and RNA bases are known, it is possible to calculate resonance Raman spectral cross-sections for the spore Raman peaks associated with the nucleic acids. The cross-sections of peaks associated with calcium dipicolinate have been measured from aqueous solutions. Cross-section values of the dominant 1017 cm(-1) calcium dipicolinate peak measured from the Bacillus spores have been shown to be consistent with a calcium dipicolinate composition of ten percent or less by weight in the spores. It is suggested that spectral cross-sections of endospores excited at 244 nm can be estimated to be the sum of the cross-sections of the calcium dipicolinate, DNA, and RNA components of the spore. It appears that the peaks due to DNA and RNA can be used as an internal standard in the calculation of spore Raman peak cross-sections, and potentially the amount of calcium dipicolinate in spores. It is estimated on the basis of known nucleic acid base cross-sections that the most intense Raman band of the Bacillus subtilis spore spectra has a cross-section of no more than 4 x 10(-18) cm(2)/mol-sr.