Dynamic Core-Shell and Alloy Structures of Multimetallic Nanomaterials and Their Catalytic Synergies

Structure-Activity Relationship in PtCo L10 Ordered Phase ORR Catalysts: Pt-Rich Shell Having Anisotropic Lattice Distortion Revealed by PDF and XAS Analysis

Ordered intermetallic PtCo alloys are promising candidates for next-generation low-Pt catalysts in proton exchange membrane fuel cells (PEMFCs) due to their high activity and stability originating from ligand and strain effects. However, the influence of the ordered phase on the surface structure, especially after Pt-rich shell formation, remains poorly understood. In this study, we systematically investigated the structural and electrochemical properties of PtCo catalysts with varying degrees of ordering, prepared by controlling the annealing temperature and time. We combined X-ray diffraction (XRD), X-ray absorption spectroscopy (XAS), scanning transmission electron microscopy (STEM), and pair distribution function (PDF) analysis to elucidate the correlation between the ordering degree, the atomic structure, and the electrochemical performance. For the first time, our detailed X-ray total scattering measurements revealed the true structural characteristics of PtCo alloys, indicating that the phase types and their relative contents vary significantly with the ordering degree. The ordered PtCo catalysts develop a Pt-rich surface layer with anisotropic strain, featuring contracted Pt-Pt distances along the surface and elongated distances across the surface, which likely contributes to its enhanced ORR activity and stability compared to their disordered counterparts. The electrochemical studies and PDF analysis suggested that the ordering transition occurs concurrently with particle growth, leading to an abrupt increase in the ORR activity at 350 °C before forming a long-range ordered phase, suggesting that local structural changes at the particle surface play a crucial role in enhancing the ORR activity. Further, operando XAS studies confirm lesser Pt-oxidation and Pt-OH formation for ordered structures than disordered ones. We believe that our findings provide new insights into the relationship between the ordering degree, particle growth, and catalytic properties of PtCo catalysts, offering guidance for the design of high-performance electrocatalysts with optimized surface structures.

Probing Interfacial Nanostructures of Electrochemical Energy Storage Systems by In-Situ Transmission Electron Microscopy

The ability to control the electrode interfaces in an electrochemical energy storage system is essential for achieving the desired electrochemical performance. However, achieving this ability requires an in-depth understanding of the detailed interfacial nanostructures of the electrode under electrochemical operating conditions. In-situ transmission electron microscopy (TEM) is one of the most powerful techniques for revealing electrochemical energy storage mechanisms with high spatiotemporal resolution and high sensitivity in complex electrochemical environments. These attributes play a unique role in understanding how ion transport inside electrode nanomaterials and across interfaces under the dynamic conditions within working batteries. This review aims to gain an in-depth insight into the latest developments of in-situ TEM imaging techniques for probing the interfacial nanostructures of electrochemical energy storage systems, including atomic-scale structural imaging, strain field imaging, electron holography, and integrated differential phase contrast imaging. Significant examples will be described to highlight the fundamental understanding of atomic-scale and nanoscale mechanisms from employing state-of-the-art imaging techniques to visualize structural evolution, ionic valence state changes, and strain mapping, ion transport dynamics. The review concludes by providing a perspective discussion of future directions of the development and application of in-situ TEM techniques in the field of electrochemical energy storage systems.

Advances in CO2-assisted oxidative dehydrogenation of light alkanes to light alkenes

The CO2-assisted oxidative dehydrogenation (ODH) of light alkanes offers a promising route for converting underutilized resources into valuable chemical feedstocks while addressing environmental challenges associated with CO2 emissions. CO2 plays a dual role in ODH by acting as a mild oxidant that enhances product selectivity and catalyst stability while preventing carbon deposition through the Reverse Water-Gas Shift (RWGS) and Boudouard reactions. The review has elucidated a variety of catalyst design and optimization strategies that may guide the future development of novel CO2-assisted ODH catalysts with improved alkane conversion, superior alkene selectivity, and long-term stability. It provides a comprehensive analysis of the structural characteristics, catalytic performances, and reaction mechanisms of typical catalysts, including transition metal catalysts (e. g., Cr-based, Co-based, V-based), metal oxide catalysts (e. g., Ga-based, In-based), noble metal catalysts (e. g., Pt-based, Ru-based), and bimetallic catalysts. Special attention is given to the structure-performance relationship of these catalysts, emphasizing how changes in promoters, supports, and morphology affect critical properties such as redox behavior, acidity-basicity balance, dispersion of active components, and catalyst-support interactions. Finally, future research directions and perspectives for the CO2-assisted ODH of ethane and propane are proposed, with a focus on advancing catalyst design and optimization strategies. This review aims to serve as a comprehensive reference for researchers exploring the potential of CO2-assisted ODH in promoting sustainable production of light alkenes.

Operando unveiling the activity origin via preferential structural evolution in Ni-Fe (oxy)phosphides for efficient oxygen evolution

Non-noble metal-based heteroatom compounds demonstrate excellent electrocatalytic activity for the oxygen evolution reaction (OER). However, the origin of this activity, driven by structure evolution effects, remains unclear due to the lack of effective in situ/operando techniques. Herein, we employ the operando quick-scan x-ray absorption fine structure (Q-XAFS) technique coupled with in situ controlled electrochemical potential to establish a structure-activity correlation of the OER catalyst. Using Ni-Fe bimetallic phosphides as a model catalyst, operando Q-XAFS experiments reveal that the structural transformation initiates at the preferential oxidation of Fe sites over Ni sites. The in situ-generated O-Fe-P structure serves as the origin of the enhanced electrocatalytic OER activity of the catalyst, a finding supported by theoretical calculations. This work provides crucial insights into understanding the reaction mechanism of the state-of-the-art Ni-Fe-based OER electrocatalysts, thus advancing the rational design of more efficient OER electrocatalysts.

Activity and stability origin of core-shell catalysts: unignorable atomic diffusion behavior

The exceptional oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) performances of core-shell catalysts are well documented, yet their activity and durability origins have been interpreted only based on the static structures. Herein we employ a NiFe alloy coated with a nitrogen-doped graphene-based carbon shell (NiFe@NC) as a model system to elucidate the active structure and stability mechanism for the ORR and OER by combining constant potential computations, ab initio molecular dynamic simulations, and experiments. The results reveal that the synergistic effects between the alloy core and carbon shell facilitate the formation of Fe-N-C active sites and replenish metal sites when central metal atoms detach. The metal core and catalytic environment function as an "ammunition depot" and "automatic loader," respectively, ensuring long-term stability. Notably, atomic diffusion behaviors are identified as critical for the formation and regeneration of active sites during the ORR/OER. This work provides new insights into the activity and stability of core-shell catalysts and emphasizes the importance of reconstruction and dynamic structural evolution in electrocatalysts.

Innovative strategies for designing and constructing efficient fuel cell electrocatalysts

Polymer electrolyte membrane fuel cells (PEMFCs) are one of the most promising energy conversion devices due to their high efficiency and zero emission; however, two major challenges, high cost and short lifetime, have been hindering the commercialization of fuel cells. Achieving low-Pt or non-precious metal oxygen reduction reaction (ORR) electrocatalysts is one of the main research ideas in this field. In this review, the degradation mechanism of Pt-based catalysts is firstly explained and elucidated, and then five strategies are suggested for the reduction of Pt usage without loss of activity and durability: modulation of metal-support interactions, optimization of local ionomers and mass transport, modulation of composition, modulation of structure, and multi-site synergistic effects. For carbon-based non-precious metal catalysts, the problems and challenges faced by heteroatom/transition-metal doped carbon-based catalysts are discussed, and several strategies to improve the activity of heteroatom/transition-metal doped carbon catalysts are suggested. Particularly, an innovative quantum well catalyst structure reported quite recently is presented which may open up new prospects for the development of fuel cell technology. Finally, this review concludes with a brief conclusion and prospects for future development of low-Pt and non-precious metal fuel cell electrocatalysts.

Advanced electrocatalysts for fuel cells: Evolution of active sites and synergistic properties of catalysts and carrier materials

Proton exchange-membrane fuel cell (PEMFC) is a clean and efficient type of energy storage device. However, the sluggish reaction rate of the cathode oxygen reduction reaction (ORR) has been a significant problem in its development. This review reports the recent progress of advanced electrocatalysts focusing on the interface/surface electronic structure and exploring the synergistic relationship of precious-based and non-precious metal-based catalysts and support materials. The support materials contain non-metal (C/N/Si, etc.) and metal-based structures, which have demonstrated a crucial role in the synergistic enhancement of electrocatalytic properties, especially for high-temperature fuel cell systems. To improve the strong interaction, some exciting synergistic strategies by doping and coating heterogeneous elements or connecting polymeric ligands containing carbon and nitrogen were also shown herein. Besides the typical role of the crystal surface, phase structure, lattice strain, etc., the evolution of structure-performance relations was also highlighted in real-time tests. The advanced in situ characterization techniques were also reviewed to emphasize the accurate structure-performance relations. Finally, the challenge and prospect for developing the ORR electrocatalysts were concluded for commercial applications in low- and high-temperature fuel cell systems.

Interfacial Reactivity-Triggered Oscillatory Lattice Strains of Nanoalloys

Understanding the structure evolution of nanoalloys under reaction conditions is vital to the design of active and durable catalysts. Herein, we report an operando measurement of the dynamic lattice strains of dual-noble-metal alloyed with an earth-abundant metal as a model electrocatalyst in a working proton-exchange membrane fuel cell using synchrotron high-energy X-ray diffraction coupled with pair distribution function analysis. The results reveal an interfacial reaction-triggered oscillatory lattice strain in the alloy nanoparticles upon surface dealloying. Analysis of the lattice strains with an apparent oscillatory irregularity in terms of frequency and amplitude using time-frequency domain transformation and theoretical calculation reveals its origin from a metal atom vacancy diffusion pathway to facilitate realloying upon dealloying. This process, coupled with surface metal partial oxidation, constitutes a key factor for the nanoalloy's durability under the electrocatalytic oxygen reduction reaction condition, which serves as a new guiding principle for engineering durable or self-healable electrocatalysts for sustainable fuel cell energy conversion.

Carbon encapsulated nanoparticles: materials science and energy applications

The technological implementation of electrochemical energy conversion and storage necessitates the acquisition of high-performance electrocatalysts and electrodes. Carbon encapsulated nanoparticles have emerged as an exciting option owing to their unique advantages that strike a high-level activity-stability balance. Ever-growing attention to this unique type of material is partly attributed to the straightforward rationale of carbonizing ubiquitous organic species under energetic conditions. In addition, on-demand precursors pave the way for not only introducing dopants and surface functional groups into the carbon shell but also generating diverse metal-based nanoparticle cores. By controlling the synthetic parameters, both the carbon shell and the metallic core are facilely engineered in terms of structure, composition, and dimensions. Apart from multiple easy-to-understand superiorities, such as improved agglomeration, corrosion, oxidation, and pulverization resistance and charge conduction, afforded by the carbon encapsulation, potential core-shell synergistic interactions lead to the fine-tuning of the electronic structures of both components. These features collectively contribute to the emerging energy applications of these nanostructures as novel electrocatalysts and electrodes. Thus, a systematic and comprehensive review is urgently needed to summarize recent advancements and stimulate further efforts in this rapidly evolving research field.

Dynamic evolution processes in electrocatalysis: structure evolution, characterization and regulation

Reactions on electrocatalytic interfaces often involve multiple processes, including the diffusion, adsorption, and conversion of reaction species and the interaction between reactants and electrocatalysts. Generally, these processes are constantly changing rather than being in a steady state. Recently, dynamic evolution processes on electrocatalytic interfaces have attracted increasing attention owing to their significant roles in catalytic reaction kinetics. In this review, we aim to provide insights into the dynamic evolution processes in electrocatalysis to emphasize the importance of unsteady-state processes in electrocatalysis. Specifically, the dynamic structure evolution of electrocatalysts, methods for the characterization of the dynamic evolution and the strategies for the regulation of the dynamic evolution for improving electrocatalytic performance are summarized. Finally, the conclusion and outlook on the research on dynamic evolution processes in electrocatalysis are presented. It is hoped that this review will provide a deeper understanding of dynamic evolution in electrocatalysis, and studies of electrocatalytic reaction processes and kinetics on the unsteady-state microscopic spatial and temporal scales will be given more attention.

Utilisation of in situ formed cyano-bridged coordination polymers as precursors of supported Ir-Ni alloy nanoparticles with precisely controlled compositions and sizes

Ir-Ni alloys supported on SiO2 have been reported to show high catalytic activity for styrene hydrogenation; however, precise control of compositions and sizes of the Ir-Ni alloys is difficult when conventional metal salts are used as precursors. Furthermore, the concomitant formation of unalloyed Ni nanoparticles disturbs quantitative discussion about Ir-Ni alloy compositions. We report herein a preparation method of Ir-Ni alloys with precisely controlled compositions on SiO2 using Ni(NO3)2 and an Ir complex possessing CN- ligands, [Ir(CN)6]3- or [Ir(ppy)2(CN)2]- (ppy = 2-phenylpyridine), as precursors. The in situ formation of cyano-bridged coordination polymers involving Ir and Ni promotes the formation of Ir-Ni alloys, whose compositions are virtually the same as expected from the amounts of Ir and Ni used for the preparation, after heat treatment under H2. The use of [Ir(ppy)2(CN)2]- as the precursor resulted in the formation of smaller Ir-Ni alloy particles than those with [Ir(CN)6]3- related to the structures of the formed coordination polymers.

Local compressive strain-induced anti-corrosion over isolated Ru-decorated Co3O4 for efficient acidic oxygen evolution

Enhancing corrosion resistance is essential for developing efficient electrocatalysts for acidic oxygen evolution reaction (OER). Herein, we report the strategic manipulation of the local compressive strain to reinforce the anti-corrosion properties of the non-precious Co3O4 support. The incorporation of Ru single atoms, larger in atomic size than Co, into the Co3O4 lattice (Ru-Co3O4), triggers localized strain compression and lattice distortion on the Co-O lattice. A comprehensive exploration of the correlation between this specific local compressive strain and electrocatalytic performance is conducted through experimental and theoretical analyses. The presence of the localized strain in Ru-Co3O4 is confirmed by operando X-ray absorption studies and supported by quantum calculations. This local strain, presented in a shortened Co-O bond length, enhances the anti-corrosion properties of Co3O4 by suppressing metal dissolutions. Consequently, Ru-Co3O4 shows satisfactory stability, maintaining OER for over 400 hours at 30 mA cm-2 with minimal decay. This study demonstrates the potential of the local strain effect in fortifying catalyst stability for acidic OER and beyond.

Coupling High-Entropy Core with Rh Shell for Efficient pH-Universal Hydrogen Evolution

Constructing high-entropy alloys (HEAs) with core-shell (CS) nanostructure is efficient for enhancing catalytic activity. However, it is extremely challenging to incorporate the CS structure with HEAs. Herein, PtCoNiMoRh@Rh CS nanoparticles (PtCoNiMoRh@Rh) with ∼5.7 nm for pH-universal hydrogen evolution reaction (HER) are reported for the first time. The PtCoNiMoRh@Rh just require 9.1, 24.9, and 17.1 mV to achieve -10 mA cm-2 in acid, neutral, and alkaline electrolyte, and the corresponding mass activity are 5.8, 2.79, and 91.8 times higher than that of Rh/C. Comparing to PtCoNiMoRh nanoparticles, the PtCoNiMoRh@Rh exhibit excellent HER activity attributed to the decrease of Rh 4d especially 4d5/2 unoccupied state induced by the multi-active sites in HEA, as well as the synergistic effect in Rh shell and HEA core. Theorical calculation exhibits that Rh-dyz, dx2, and dxz orbitals experience a negative shift with shell thickness increasing. The HEAs with CS structure would facilitate the rational design of high-performance HEAs catalysts.

Bioorthogonal Regulated Metabolic Balance for Promotion of Ferroptosis and Mild Photothermal Therapy

The nanozyme with NADPH oxidase (NOX)-like activity can promote the consumption of NADPH and the generation of free radicals. In consideration of that the upregulation of glucose-6-phosphate dehydrogenase (G6PD) would accelerate the compensation production of NADPH, for inhibition of G6PD activity, our designed bioorthogonal nanozyme can in situ catalyze pro-DHEA to produce G6PD inhibitor and dehydroepiandrosterone (DHEA) drugs to inhibit G6PD activity. Therefore, the well-defined platform can disrupt NADPH homeostasis, leading to the collapse of the antioxidant defense system in the tumor cells. The enzyme-like activity of PdCuFe is further enhanced when irradiated by NIR-II light. The destruction of NADPH homeostasis can promote ferroptosis and, in turn, facilitate mild photothermal therapy. Our design can realize NADPH depletion and greatly improve the therapeutic effect through metabolic regulation, which may provide inspiration for the design of bioorthogonal catalysis.

Nanozymes-Mediated Cascade Reaction System for Tumor-Specific Diagnosis and Targeted Therapy

Cascade reactions are described as efficient and versatile tools, and organized catalytic cascades can significantly improve the efficiency of chemical interworking between nanozymes. They have attracted great interest in many fields such as chromogenic detection, biosensing, tumor diagnosis, and therapy. However, how to selectively kill tumor cells by enzymatic reactions without harming normal cells, as well as exploring two or more enzyme-engineered nanoreactors for cascading catalytic reactions, remain great challenges in the field of targeted and specific cancer diagnostics and therapy. The latest research advances in nanozyme-catalyzed cascade processes for cancer diagnosis and therapy are described in this article. Here, various sensing strategies are summarized, for tumor-specific diagnostics. Targeting mechanisms for tumor treatment using cascade nanozymes are classified and analyzed, "elements" and "dimensions" of cascade nanozymes, types, designs of structure, and assembly modes of highly active and specific cascade nanozymes, as well as a variety of new strategies of tumor targeting based on the cascade reaction of nanozymes. Finally, the integrated application of the cascade nanozymes systems in tumor-targeted and specific diagnostic therapy is summarized, which will lay the foundation for the design of more rational, efficient, and specific tumor diagnostic and therapeutic modalities in the future.

Sulfonated Microporous Polyxanthene Binder for High-Temperature Hydrogen Fuel Cells

High-temperature proton exchange membrane fuel cells based on phosphoric acid-doped polybenzimidazole (PBI) materials face challenges of low power output and low Pt utilization due to the lack of suitable electrode binders. We have developed a sulfonated microporous polymer material (namely, SPX, i.e., sulfonated polyxanthene) with excellent chemical stability, to be used as the electrode binder. The rigid and contorted polymer structure of SPX reduces the adsorption of the ionomer on the Pt catalyst surface, prevents phosphoric acid loss, and promotes the rapid transport of reactant gases and water molecules within the catalyst layer. The cell performance is thereby significantly improved, with a Pt utilization reaching 42.51%, and a peak power density approaching 805 mW cm-2 at 180 °C, surpassing the performance of cells using PBI as a binder.

Layered Double Hydroxide-Based PdCux@LDH Alloy Nanozyme for a Singlet Oxygen-Boosted Sonodynamic Therapy

Redox nanozymes have demonstrated tremendous promise in disrupting cellular homeostasis toward cancer therapy, but a dysfunctional competition of diverse activities makes it normally restricted by the complex tumor microenvironment (TME). As palladium nanocrystals can achieve the precise regulation of the enzyme-like activity by regulating exposed crystal planes, noble metal nanoalloys can enhance the enzyme-like activity by promoting electron transfer and enhanced active sites. Herein, bimetallic nanoalloys with optimized enzymatic activity were intelligently designed via the interaction between the Pd and layered double hydroxide, denoted as PdCux@LDH. This PdCux@LDH is able to produce long-lived singlet oxygen (1O2) with high efficiency and selectivity for ultrasound-improved cancer therapy. In addition, this PdCux@LDH nanozyme demonstrated unique surface-dependent multienzyme-mimicking activities for catalyzing cascade reactions: oxidase (OXD)- and catalase (CAT)-mimicking activities. Interestingly, ultrasound (US) stimulation can further improve the dual-enzyme-mimicking activities and impart superior reactive oxygen species (ROS) generation activity, thereby further consuming nicotinamide adenine dinucleotide (NADH) to cause mitochondrial dysfunction, resulting in a highly efficient alloy nanozyme-mediated cancer therapy. This work opens a new research avenue to apply nanozymes for effective sonodynamic therapies (SDT).

Optimized Pt–Co Alloy Nanoparticles for Reverse Water–Gas Shift Activation of CO2

Different Co contents were used to tune bimetallic Pt–Co nanoparticles with a diameter of 8 nm, resulting in Pt:Co ratios of 3.54, 1.51, and 0.96. These nanoparticles were then applied to the MCF-17 mesoporous silica support. The synthesized materials were characterized with HR-TEM, HAADF-TEM, EDX, XRD, BET, ICP-MS, in situ DRIFTS, and quasi in situ XPS techniques. The catalysts were tested in a thermally induced reverse water–gas shift reaction (CO2:H2 = 1:4) at atmospheric pressure in the 200–700 °C temperature range. All bimetallic Pt–Co particles outperformed the pure Pt benchmark catalyst. The nanoparticles with a Pt:Co ratio of 1.51 exhibited 2.6 times higher activity and increased CO selectivity by 4% at 500 °C. Experiments proved that the electron accumulation and alloying effect on the Pt–Co particles are stronger with higher Co ratios. The production of CO followed the formate reaction pathway on all catalysts due to the face-centered-cubic structure, which is similar to the Pt benchmark. It is concluded that the enhanced properties of Co culminate at a Pt:Co ratio of 1.51 because decreasing the ratio to 0.96 results in lower activity despite having more Co atoms available for the electronic interaction, resulting in the lack of electron-rich Pt sites.

Correlating Structural Disorder in Metal (Oxy)hydroxides and Catalytic Activity in Electrocatalytic Oxygen Evolution

Understanding the correlation between the structural evolution of electrocatalysts and their catalytic activity is both essential and challenging. In this study, we investigate this correlation in the context of the oxygen evolution reaction (OER) by examining the influence of structural disorder during and after dynamic structural evolution on the OER activity of Fe-Ni (oxy)hydroxide catalysts using operando X-ray absorption spectroscopy, alongside other experiments and theoretical calculations. The Debye-Waller factors obtained from extended X-ray absorption fine structure analyses reflect the degree of structural disorder and exhibit a robust correlation with the intrinsic OER activities of the electrocatalysts. The enhanced OER activity of in situ-generated metal (oxy)hydroxides derived from different pre-catalysts is linked to increased structural disorder, offering a promising approach for designing efficient OER electrocatalysts. This strategy may inspire similar investigations in related electrocatalytic energy-conversion systems.

Intermetallic Nanocrystals for Fuel-Cells-Based Electrocatalysis

Electrocatalysis underpins the renewable electrochemical conversions for sustainability, which further replies on metallic nanocrystals as vital electrocatalysts. Intermetallic nanocrystals have been known to show distinct properties compared to their disordered counterparts, and been long explored for functional improvements. Tremendous progresses have been made in the past few years, with notable trend of more precise engineering down to an atomic level and the investigation transferring into more practical membrane electrode assembly (MEA), which motivates this timely review. After addressing the basic thermodynamic and kinetic fundamentals, we discuss classic and latest synthetic strategies that enable not only the formation of intermetallic phase but also the rational control of other catalysis-determinant structural parameters, such as size and morphology. We also demonstrate the emerging intermetallic nanomaterials for potentially further advancement in energy electrocatalysis. Then, we discuss the state-of-the-art characterizations and representative intermetallic electrocatalysts with emphasis on oxygen reduction reaction evaluated in a MEA setup. We summarize this review by laying out existing challenges and offering perspective on future research directions toward practicing intermetallic electrocatalysts for energy conversions.

Design and Mechanism Insight of Monodispersed AuCuPt Alloy Nanozyme with Antitumor Activity

The abrogation of the self-adaptive redox evolution of tumors is promising for improving therapeutic outcomes. In this study, we designed a trimetallic alloy nanozyme AuCuPt-PpIX (ACPP), which mimics up to five naturally occurring enzymes: glucose oxidase (GOD), superoxide dismutase (SOD), peroxidase (POD), catalase (CAT), and glutathione peroxidase (GPx). Facilitated by these enzyme-mimicking traits, the constructed ACPP nanozymes can not only disrupt the established redox homeostasis in tumors through a series of enzymatic cascade reactions but also achieve cyclic regeneration of the relevant enzyme substrates. Density functional theory (DFT) calculations have theoretically explained the synergistic effect of multimetallic doping and the possible mechanism of enzymatic catalysis. The doped Cu and Pt sites are conducive to the adsorption, activation, and dissociation of reactant molecules, whereas the Au sites are conducive to desorption, which significantly improves catalytic efficiency via a synergistic effect. Additionally, ACPP nanozymes can improve the effect of protoporphyrin (PpIX)-enabled sonodynamic therapy (SDT) by alleviating hypoxia and initiating ferroptosis by inducing lipid peroxidation (LPO) and inhibiting GPX4 activity, thus achieving multimodal synergistic therapy. This study presents a typical paradigm to enable the use of multimetallic alloy nanozymes for the treatment of tumor cells with self-adaptive properties.

Morphological and Coordination Modulations in Iridium Electrocatalyst for Robust and Stable Acidic OER Catalysis

Proton exchange membrane water splitting (PEMWS) technology has high-level current density, high operating pressure, small electrolyzer-size, integrity, flexibility, and has good adaptability to the volatility of wind power and photovoltaics, but the development of both active and high stability of the anode electrocatalyst in acidic environment is still a huge challenge, which seriously hinders the promotion and application of PEMWS. In recent years, researchers have made tremendous attempts in the development of high-quality active anode electrocatalyst, and we summarize some of the research progress made by our group in the design and synthesis of PEMWS anode electrocatalysts with different nanostructures, and makes full use of electrocatalytic activity points to increase the inherent activity of Iridium (Ir) sites, and provides optimization strategies for the long-term non-decay of catalysts under high anode potential in acidic environments. At this stage, these research advances are expected to facilitate the research and technological progress of PEMWS, and providing some research ideas and references for future research on efficient and inexpensive PEMWS anode electrocatalysts.

Ultrasound-Triggered Cascade Amplification of Nanotherapy

Ultrasound (US)-triggered cascade amplification of nanotherapies has attracted considerable attention as an effective strategy for cancer treatment. With the remarkable advances in materials chemistry and nanotechnology, a large number of well-designed nanosystems have emerged that incorporate presupposed cascade amplification processes and can be activated to trigger therapies such as chemotherapy, immunotherapy, and ferroptosis, under exogenous US stimulation or specific substances generated by US actuation, to maximize antitumor efficacy and minimize detrimental effects. Therefore, summarizing the corresponding nanotherapies and applications based on US-triggered cascade amplification is essential. This review comprehensively summarizes and highlights the recent advances in the design of intelligent modalities, consisting of unique components, distinctive properties, and specific cascade processes. These ingenious strategies confer unparalleled potential to nanotherapies based on ultrasound-triggered cascade amplification and provide superior controllability, thus overcoming the unmet requirements of precision medicine and personalized treatment. Finally, the challenges and prospects of this emerging strategy are discussed and it is expected to encourage more innovative ideas and promote their further development.

Mesoporous multimetallic nanospheres with exposed highly entropic alloy sites

Multimetallic alloys (MMAs) with various compositions enrich the materials library with increasing diversity and have received much attention in catalysis applications. However, precisely shaping MMAs in mesoporous nanostructures and mapping the distributions of multiple elements remain big challenge due to the different reduction kinetics of various metal precursors and the complexity of crystal growth. Here we design a one-pot wet-chemical reduction approach to synthesize core-shell motif PtPdRhRuCu mesoporous nanospheres (PtPdRhRuCu MMNs) using a diblock copolymer as the soft template. The PtPdRhRuCu MMNs feature adjustable compositions and exposed porous structures rich in highly entropic alloy sites. The formation processes of the mesoporous structures and the reduction and growth kinetics of different metal precursors of PtPdRhRuCu MMNs are revealed. The PtPdRhRuCu MMNs exhibit robust electrocatalytic hydrogen evolution reaction (HER) activities and low overpotentials of 10, 13, and 28 mV at a current density of 10 mA cm-2 in alkaline (1.0 M KOH), acidic (0.5 M H2SO4), and neutral (1.0 M phosphate buffer solution (PBS)) electrolytes, respectively. The accelerated kinetics of the HER in PtPdRhRuCu MMNs are derived from multiple compositions with synergistic interactions among various metal sites and mesoporous structures with excellent mass/electron transportation characteristics.

Accurate and efficient machine learning models for predicting hydrogen evolution reaction catalysts based on structural and electronic feature engineering in alloys

Predictive materials design of high-performance alloy electrocatalysts is a grand challenge in hydrogen production via water electrolysis. The vast combinatorial space of element substitutions in alloy electrocatalysts offers a wealth of candidate materials, but presents a significant challenge in terms of experimental and computational exploration of all possible options. Recent scientific and technological developments in machine learning (ML) have offered a new opportunity to accelerate such electrocatalyst materials design. Herein, by incorporating both the electronic and structural properties of alloys, we are able to construct accurate and efficient ML models and predict high-performance alloy catalysts for the hydrogen evolution reaction (HER). We have identified the light gradient boosting (LGB) algorithm as the best-performed method, with an excellent coefficient of determination (R²) value reaching 0.921 and the corresponding root-mean-square error (RMSE) being 0.224 eV. The average marginal contributions of alloy features towards ΔG_H* values are estimated to determine the importance of various features during the prediction processes. Our results indicate that both the electronic properties of constituent elements and the structural adsorption site features play the most critical roles in the ΔG_H* prediction. Furthermore, 84 potential alloys with |ΔG_H*| values less than 0.1 eV are successfully screened out of 2290 candidates selected from the Material Project (MP) database. It is reasonable to expect that the ML models with structural and electronic feature engineering developed in this work would provide new insights in future electrocatalyst developments for the HER and other heterogeneous reactions.

Protection Against Absorption Passivation on Platinum by a Nitrogen-Doped Carbon Shell for Enhanced Oxygen Reduction Reaction

In polymer electrolyte type fuel cells, the platinum-based catalysts are applied for the oxygen reduction reaction. However, the specific adsorption from the sulfo group in perfluorosulfonic acid ionomers has been considered to passivate the active sites of the platinum. Herein, we present platinum catalysts covered by an ultrathin two-dimensional nitrogen-doped carbon shell (CN_x) layer to protect the platinum from the specific adsorption of perfluorosulfonic acid ionomers. Such coated catalysts were obtained by the facile polydopamine coating method, which is available to tune the thickness of the carbon shell by tuning the polymerization time. The coated catalysts that possess a CN_x with a thickness of 1.5 nm demonstrated superior ORR activity and comparable oxygen diffusivity when compared to the commercial Pt/C. These results were supported by the changes in the electronic statements observed in the X-ray photoelectron spectroscopy (XPS) and CO stripping analyses. Furthermore, the oxygen coverage, CO displacement charge, and operando X-ray absorption spectroscopy (XAS) tests were employed to identify the protection effect of CN_x in coated catalysts compared with the Pt/C catalysts. In summary, the CN_x could not only suppress the oxide species generation but also prevent the specific adsorption of the sulfo group in the ionomer.

Progress and Perspective for In Situ Studies of Oxygen Reduction Reaction in Proton Exchange Membrane Fuel Cells

Proton exchange membrane fuel cell (PEMFC) is one of the most promising energy conversion devices with high efficiency and zero emission. However, oxygen reduction reaction (ORR) at the cathode is still the dominant limiting factor for the practical development of PEMFC due to its sluggish kinetics and the vulnerability of ORR catalysts under harsh operating conditions. Thus, the development of high-performance ORR catalysts is essential and requires a better understanding of the underlying ORR mechanism and the failure mechanisms of ORR catalysts with in situ characterization techniques. This review starts with the introduction of in situ techniques that have been used in the research of the ORR processes, including the principle of the techniques, the design of the in situ cells, and the application of the techniques. Then the in situ studies of the ORR mechanism as well as the failure mechanisms of ORR catalysts in terms of Pt nanoparticle degradation, Pt oxidation, and poisoning by air contaminants are elaborated. Furthermore, the development of high-performance ORR catalysts with high activity, anti-oxidation ability, and toxic-resistance guided by the aforementioned mechanisms and other in situ studies are outlined. Finally, the prospects and challenges for in situ studies of ORR in the future are proposed.

Insights into the Electrochemical Behavior of Manganese Oxides as Catalysts for the Oxygen Reduction and Evolution Reactions: Monometallic Core-Shell Mn/Mn3 O4

Overcoming the sluggish electrode kinetics of both oxygen reduction and evolution reactions (ORR/OER) with non-precious metal electrocatalysts will accelerate the development of rechargeable metal-air batteries and regenerative fuel cells. The authors investigated the electrochemical behavior and ORR/OER catalytic activity of core-porous shell Mn/Mn₃ O₄ nanoparticles in comparison with other manganese dioxides (β- and γ-MnO₂ ), and benchmarked against Pt/C and Pt/C-IrO₂ . Under reversible operation in O₂ -saturated 5 M KOH at 22 °C, the early stage activity of core-shell Mn/Mn₃ O₄ shows two times higher ORR and OER current density compared to the other MnO₂ structures at 0.32 and 1.62 V versus RHE, respectively. It is revealed that Mn(III) oxidation to Mn(IV) is the primary cause of Mn/Mn₃ O₄ activity loss during ORR/OER potential cycling. To address it, an electrochemical activation method using Co(II) is proposed. By incorporating Co(II) into MnO_x , new active sites are introduced and the content of Mn(II) is increased, which can stabilize the Mn(III) sites through comproportionation with Mn(IV). The Co-incorporated Mn/Mn₃ O₄ has superior activity and durability. Furthermore, it also surpassed the activity of Pt/C-IrO₂ with similar durability. This study demonstrates that cost-effective ORR/OER catalysis is possible.

Dual Nanozyme-Driven PtSn Bimetallic Nanoclusters for Metal-Enhanced Tumor Photothermal and Catalytic Therapy

Specific generation of reactive oxygen species (ROS) within tumors in situ catalyzed by nanozymes is a promising strategy for cancer therapeutics. However, it remains a significant challenge to fabricate highly efficient nanozymes acting in the tumor microenvironment. Herein, we develop a bimetallic nanozyme (Pt₅₀Sn₅₀) with the photothermal enhancement of dual enzymatic activities for tumor catalytic therapy. The structures and activities of PtSn bimetallic nanoclusters (BNCs) with different Sn content are explored and evaluated systematically. Experimental comparisons show that the Pt₅₀Sn₅₀ BNCs exhibit the highest activities among all those investigated, including enzymatic activity and photothermal property, due to the generation of SnO_2-x with oxygen vacancy (O_vac) sites on the surface of Pt₅₀Sn₅₀ BNCs. Specifically, the Pt₅₀Sn₅₀ BNCs exhibit photothermal-enhanced peroxidase-like and catalase-like activities, as well as a significantly enhanced anticancer efficacy in both multicellular tumor spheroids and in vivo experiments. Due to the high X-ray attenuation coefficient and excellent light absorption property, the Pt₅₀Sn₅₀ BNCs also show dual-mode imaging capacity of computed tomography and photoacoustic imaging, which could achieve in vivo real-time monitoring of the therapeutic process. Therefore, this work will advance the development of noble-metal nanozymes with optimal composition for efficient tumor catalytic therapy.

Ethane Dehydrogenation over the Core-Shell Pt-Based Alloy Catalysts: Driven by Engineering the Shell Composition and Thickness

Pt-based catalysts as the commercial catalysts in ethane dehydrogenation (EDH) face one of the main challenges of realizing the balance between coke formation and catalytic activity. In this work, a strategy to drive the catalytic performance of EDH on Pt-Sn alloy catalysts is proposed by rationally engineering the shell surface structure and thickness of core-shell Pt@Pt₃Sn and Pt₃Sn@Pt catalysts from a theoretical perspective. Eight types of Pt@Pt₃Sn and Pt₃Sn@Pt catalysts with different Pt and Pt₃Sn shell thicknesses are considered and compared with the industrially used Pt and Pt₃Sn catalysts. Density functional theory (DFT) calculations completely describe the reaction network of EDH, including the side reactions of deep dehydrogenation and C-C bond cracking. Kinetic Monte Carlo (kMC) simulations reveal the influences of the catalyst surface structure, experimentally related temperatures, and reactant partial pressures. The results show that CHCH* is the main precursor for coke formation, and Pt@Pt₃Sn catalysts generally have higher C₂H₄(g) activity and lower selectivity compared to those of Pt₃Sn@Pt catalysts, which is attributed to the unique surface geometrical and electronic properties. 1Pt₃Sn@4Pt and 1Pt@4Pt₃Sn are screened out as catalysts exhibiting excellent performance; especially, the 1Pt₃Sn@4Pt catalyst has much higher C₂H₄(g) activity and 100% C₂H₄(g) selectivity compared to those of 1Pt@4Pt₃Sn and the widely used Pt and Pt₃Sn catalysts. The two descriptors C₂H₅* adsorption energy and reaction energy of its dehydrogenation to C₂H₄* are proposed to qualitatively evaluate the C₂H₄(g) selectivity and activity, respectively. This work facilitates a valuable exploration for optimizing the catalytic performance of core-shell Pt-based catalysts in EDH and reveals the great importance of the fine control of the catalyst shell surface structure and thickness.

Strain engineering of electrocatalysts for hydrogen evolution reaction

As the key half reaction of water-splitting electrolysis, the hydrogen evolution reaction (HER) that occurs at the cathode directly determines the overall efficiency of hydrogen production. To improve the efficiency of electrochemical water splitting for hydrogen generation, efficient and robust catalysts need to be developed. Strain engineering, which represents an effective and promising category of strategies, can regulate the electronic structures of catalysts by modulating the lattice strain and ultimately optimizing the HER dynamics. This work critically reviews the recent progress of strain engineering in HER and provides future perspectives for this area. The methods and characterization techniques are also introduced in detail. Hopefully this review can provide guidelines for the design and manufacturing of advanced catalysts for HER and other heterogeneous catalysis reactions such as chemical sensing, CO₂ reduction and NH₃ synthesis.

Alloying at a Subnanoscale Maximizes the Synergistic Effect on the Electrocatalytic Hydrogen Evolution

Bonding dissimilar elements to provide synergistic effects is an effective way to improve the performance of metal catalysts. However, as the properties become more dissimilar, achieving synergistic effects effectively becomes more difficult due to phase separation. Here we describe a comprehensive study on how subnanoscale alloying is always effective for inter-elemental synergy. Thirty-six combinations of both bimetallic subnanoparticles (SNPs) and nanoparticles (NPs) were studied systematically using atomic-resolution imaging and catalyst benchmarking based on the hydrogen evolution reaction (HER). Results revealed that SNPs always produce greater synergistic effects than NPs, the greatest synergistic effect was found for the combination of Pt and Zr. The atomic-scale miscibility and the associated modulation of electronic states at the subnanoscale were much different from those at the nanoscale, which was observed by annular-dark-field scanning transmission electron microscopy (ADF-STEM) and X-ray photoelectron spectroscopy (XPS), respectively.

Understanding a ligand's effects on intra-cluster and inter-cluster assembly

Ligands play an essential role in cluster assembly; however, understanding this behavior at the atomic level is far off. In this work, Cd₁₂Ag₃₂(S-PhOMe)₃₆(PPh)₄@Cd₆Ag₂(S-PhOMe)₆Cl₆(PPh₃)₈@Ag₆(S-PhOMe)₆Cl₂ (Abbrev. Cd12Ag32-1) and Cd₁₂Ag₃₂(S-c-C₆H₁₁)₃₆ (Abbrev. Cd12Ag32-2) were synthesized and structurally determined by single-crystal X-ray diffraction. An important finding is the selective adsorption of phosphine ligands that is caused by the different types of thiol ligands. In addition, Cd12Ag32-1 follows a unique stacking pattern in a superlattice with multiple inter-cluster channels. Overall, this study is helpful for an in-depth understanding of the effect of mixed ligands on nanocluster formation and the correlation between structure and properties in the nanocluster range.

Unveiling the Synergistic Effects of Monodisperse Sea Urchin-like PdPb Alloy Nanodendrites as Stable Electrocatalysts for Ethylene Glycol and Glycerol Oxidation Reactions

In recent times, the fabrication of noble metal-based catalysts with controllable morphologies has become a research hotspot. Electrocatalytic devices with excellent catalytic performance and enhanced durability for the ethylene glycol oxidation reaction (EGOR) and the glycerol oxidation reaction (GOR) are significant for commercial direct fuel cells. Herein, a series of PdPb sea urchin-like nanodendrite (ND) structures with controllable molar ratios were synthesized as EGOR and GOR electrocatalysts of high efficiency. The optimized structurally regular Pd₃Pb NDs exhibit the best electrocatalytic activity and outstanding stability compared to other samples and commercial Pt/C. In addition, the integrated Pb on Pd₃Pb NDs can mitigate the bond energy the intermediates generate and further boost the electrooxidation of the intermediates by supplying enough active sites without considering its intrinsic structure, which is beneficial to the enhanced EGOR and GOR activity and stability. With the assistance of electrochemical measurement, the mechanism of the enhanced alloy was further investigated. This paper presents a promising strategy to fabricate catalysts with stable structures, which will elucidate a very promising approach for developing Pd-based catalysts for further applications in fuel cells.

Architecture Evolution of Different Nanoparticles Types: Relationship between the Structure and Functional Properties of Catalysts for PEMFC

This review considers the features of the catalysts with different nanoparticle structures architecture transformation under the various pre-treatment types. Based on the results of the publications analysis, it can be concluded that the chemical or electrochemical activation of bimetallic catalysts has a significant effect on their composition, microstructure, and catalytic activity in the oxygen reduction reaction. The stage of electrochemical activation is recommended for use as a mandatory catalyst pre-treatment to obtain highly active de-alloyed materials. The literature is studied, which covers possible variants of the structural modification under the influence of thermal treatment under different processing conditions. Additionally, based on the literature data analysis, recommendations are given for the thermal treatment of catalysts alloyed with various d-metals.

Correlating structure, morphology and properties of metal nanostructures by combining single-particle optical spectroscopy and electron microscopy

The nanoscale morphology of metal nanostructures directly defines their optical, catalytic and electronic properties and even small morphological changes can cause significant property variations. On the one hand, this dependence allows for precisely tuning and exploring properties by shape engineering; next to advanced synthesis protocols, post-synthesis modification through tailored laser modification has become an emerging tool to do so. On the other hand, with this interconnection also comes the quest for detailed structure-property correlation and understanding of laser-induced reshaping processes on the individual nanostructure level beyond ensemble averages. With the development of single-particle (ultrafast) optical spectroscopy techniques and advanced electron microscopy such understanding can in principle be gained at the femtosecond temporal and atomic spatial scale, respectively. However, accessing both on the same individual nanostructure is far from straightforward as it requires the combination of optical spectroscopy and electron microscopy. In this Minireview, we highlight key studies from recent years that performed such correlative measurements on the same individual metal nanostructure either in a consecutive ex situ manner or in situ inside the electron microscope. We demonstrate that such a detailed correlation is critical for revealing the full picture of the structure-property relationship and the physics behind light-induced nanostructure modifications. We put emphasis on the advantages and disadvantages of each methodology as well as on the unique information that one can gain only by correlative studies performed on the same individual nanostructure and end with an outlook on possible further development of this field in the near future.

Heterometallic nanomaterials: activity modulation, sensing, imaging and therapy

Heterometallic nanomaterials (HMNMs) display superior physicochemical properties and stability to monometallic counterparts, accompanied by wider applications in the fields of catalysis, sensing, imaging, and therapy due to synergistic effects between multi-metals in HMNMs. So far, most reviews have mainly concentrated on introduction of their preparation approaches, morphology control and applications in catalysis, assay of heavy metal ions, and antimicrobial activity. Therefore, it is very important to summarize the latest investigations of activity modulation of HMNMs and their recent applications in sensing, imaging and therapy. Taking the above into consideration, we briefly underline appealing chemical/physical properties of HMNMs chiefly tailored through the sizes, shapes, compositions, structures and surface modification. Then, we particularly emphasize their widespread applications in sensing of targets (e.g. metal ions, small molecules, proteins, nucleic acids, and cancer cells), imaging (frequently involving photoluminescence, fluorescence, Raman, electrochemiluminescence, magnetic resonance, X-ray computed tomography, photoacoustic imaging, etc.), and therapy (e.g. radiotherapy, chemotherapy, photothermal therapy, photodynamic therapy, and chemodynamic therapy). Finally, we present an outlook on their forthcoming directions. This timely review would be of great significance for attracting researchers from different disciplines in developing novel HMNMs.

Silver-Copper Alloy Nanoinks for Ambient Temperature Sintering

There is an increasing need to reduce the silver content in silver-based inks or pastes and achieve low-temperature sintering for scalable and low-cost production of printed wearable electronics. This need depends on the ability to control the metal composition and the surface properties of the nanoinks. Alloying silver with copper provides a pathway for meeting the need in terms of cost reduction, but little is known about the composition controllability and the low-temperature sintering capability. We report herein a scalable wet chemical synthesis of bimetallic silver-copper alloy nanoinks with room temperature sintering properties. The bimetallic alloy nanoparticles with a controllable composition can be formulated as stable nanoinks. The nanoinks printed on paper substrates are shown to sinter under room temperature. In addition to composition dependence, the results reveal an intriguing dependence of sintering on humidity above the printed nanoink films. These findings are assessed based on theoretical simulation of the sintering processes via surface-mediated sintering and interparticle necking mechanisms in terms of nanoscale adsorption, adhesion and diffusion, and surface free energies. Implications of the findings for room temperature fabrication of wearable sensors are also discussed.

Revealing the composition-dependent structural evolution fundamentals of bimetallic nanoparticles through an inter-particle alloying reaction

Alloy nanoparticles represent one of the most important metal materials, finding increasing applications in diverse fields of catalysis, biomedicine, and nano-optics. However, the structural evolution of bimetallic nanoparticles in their full composition spectrum has been rarely explored at the molecular and atomic levels, imparting inherent difficulties to establish a reliable structure-property relationship in practical applications. Here, through an inter-particle reaction between [Au₄₄(SR)₂₆]^2- and [Ag₄₄(SR)₃₀]^4- nanoparticles or nanoclusters (NCs), which possess the same number of metal atoms, but different atomic packing structures, we reveal the composition-dependent structural evolution of alloy NCs in the alloying process at the molecular and atomic levels. In particular, an inter-cluster reaction can produce three sets of Au _x Ag_44-x NCs in a wide composition range, and the structure of Au _x Ag_44-x NCs evolves from Ag-rich [Au _x Ag_44-x (SR)₃₀]^4- (x = 1-12), to evenly mixed [Au _x Ag_44-x (SR)₂₇]^3- (x = 19-24), and finally to Au-rich [Au _x Ag_44-x (SR)₂₆]^2- (x = 40-43) NCs, with the increase of the Au/Ag atomic ratio in the NC composition. In addition, leveraging on real-time electrospray ionization mass spectrometry (ESI-MS), we reveal the different inter-cluster reaction mechanisms for the alloying process in the sub-3-nm regime, including partial decomposition-reconstruction and metal exchange reactions. The molecular-level inter-cluster reaction demonstrated in this study provides a fine chemistry to customize the composition and structure of bimetallic NCs in their full alloy composition spectrum, which will greatly increase the acceptance of bimetallic NCs in both basic and applied research.

Formation of Au, Pt, and bimetallic Au-Pt nanostructures from thermal dewetting of single-layer or bilayer thin films

Formation of Au, Pt, and bimetallic Au-Pt nanostructures by thermal dewetting of single-layer Au, Pt and bilayer Au-Pt thin films on Si substrates was systematically studied. The solid-state dewetting of both single-layer and bilayer metallic films was shown to go through heterogeneous void initiation followed by void growth via capillary agglomeration. For the single-layer of Au and Pt films, the void growth started at a temperature right above the Hüttig temperature, at which the atoms at the surface or at defects become mobile. Uniformly distributed Au (7 ± 1 nm to 33 ± 8 nm) and Pt (7 ± 1 nm) NPs with monodispersed size distributions were produced from complete dewetting achieved for thinner 1.7-5.5 nm thick Au and 1.4 nm thick Pt films, respectively. The NP size is strongly dependent on the initial thin film thickness, but less so on temperature and time. Thermal dewetting of Au-Pt bilayer films resulted in partial dewetting only, forming isolated nano-islands or large particles, regardless of sputtering order and total thin film thickness. The increased resistance to thermal dewetting shown in the Au-Pt bilayer films as compared to the individual Au or Pt layer is a reflection of the stabilizing effect that occurs upon adding Pt to Au in the bimetallic system. Energy dispersive x-ray spectroscopic analysis showed that the two metals in the bilayer films broke up together instead of dewetting individually. According to the x-ray diffraction analysis, the produced Au-Pt nanostructures are phase-segregated, consisting of an Au-rich phase and a Pt-rich phase.

Lattice Strain and Surface Activity of Ternary Nanoalloys under the Propane Oxidation Condition

The ability to harness the catalytic oxidation of hydrocarbons is critical for both clean energy production and air pollutant elimination, which requires a detailed understanding of the dynamic role of the nanophase structure and surface reactivity under the reaction conditions. We report here findings of an in situ/operando study of such details of a ternary nanoalloy under the propane oxidation condition using high-energy synchrotron X-ray diffraction coupled to atomic pair distribution function (HE-XRD/PDF) analysis and diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS). The catalysts are derived by alloying Pt with different combinations of second (Pd) and third (Ni) transition metals, showing a strong dependence of the catalytic activity on the Ni content. The evolution of the phase structure of the nanoalloy is characterized by HE-XRD/PDF probing of the lattice strain, whereas the surface activity is monitored by DRIFTS detection of the surface intermediate formation during the oxidation of propane by oxygen. The results reveal the dominance of the surface intermediate species featuring a lower degree of oxygenation upon the first C-C bond cleavage on the lower-Ni-content nanoalloy and a higher degree of oxygenation upon the second C-C bond cleavage on the higher-Ni-content nanoalloy. The face-centered-cubic-type phase structures of the nanoalloys under the oxidation condition are shown to exhibit Ni-content-dependent changes of lattice strains, featuring the strongest strain with little variation for the higher-Ni-content nanoalloy, in contrast to the weaker strains with oscillatory variation for the lower-Ni-content nanoalloys. This process is also accompanied by oxygenation of the metal components in the nanoalloy, showing a higher degree of oxygenation for the higher-Ni-content nanoalloy. These subtle differences in phase structure and surface activity changes correlate with the Ni-composition-dependent catalytic activity of the nanoalloys, which sheds a fresh light on the correlation between the dynamic change of atomic strains and the surface reactivity and has significant implications for the design of oxidation catalysts with enhanced activities.

Modulating the intrinsic properties of platinum–cobalt nanowires for enhanced electrocatalysis of the oxygen reduction reaction

The ability to improve the intrinsic activity of nanoalloy electrocatalysts is essential for designing highly efficient electrocatalysts by optimizing the basic physical properties of the nanoalloy.

Regulating the lattice strain of platinum–copper catalysts for enhancing collaborative electrocatalysis

PtnCu100−n alloy nanostellates showed the high catalytic activity for both the oxygen reduction and alcohol oxidation reactions.

Single Step Laser-Induced Deposition of Plasmonic Au, Ag, Pt Mono-, Bi- and Tri-Metallic Nanoparticles

Multimetallic plasmonic systems usually have distinct advantages over monometallic nanoparticles due to the peculiarity of the electronic structure appearing in advanced functionality systems, which is of great importance in a variety of applications including catalysis and sensing. Despite several reported techniques, the controllable synthesis of multimetallic plasmonic nanoparticles in soft conditions is still a challenge. Here, mono-, bi- and tri-metallic nanoparticles were successfully obtained as a result of a single step laser-induced deposition approach from monometallic commercially available precursors. The process of nanoparticles formation is starting with photodecomposition of the metal precursor resulting in nucleation and the following growth of the metal phase. The deposited nanoparticles were studied comprehensively with various experimental techniques such as SEM, TEM, EDX, XPS, and UV-VIS absorption spectroscopy. The size of monometallic nanoparticles is strongly dependent on the type of metal: 140–200 nm for Au, 40–60 nm for Ag, 2–3 nm for Pt. Bi- and trimetallic nanoparticles were core-shell structures representing monometallic crystallites surrounded by an alloy of respective metals. The formation of an alloy phase took place between monometallic nanocrystallites of different metals in course of their growth and agglomeration stage.

Recent Advances in Electrocatalysts for Proton Exchange Membrane Fuel Cells and Alkaline Membrane Fuel Cells

The rapid progress of proton exchange membrane fuel cells (PEMFCs) and alkaline exchange membrane fuel cells (AMFCs) has boosted the hydrogen economy concept via diverse energy applications in the past decades. For a holistic understanding of the development status of PEMFCs and AMFCs, recent advancements in electrocatalyst design and catalyst layer optimization, along with cell performance in terms of activity and durability in PEMFCs and AMFCs, are summarized here. The activity, stability, and fuel cell performance of different types of electrocatalysts for both oxygen reduction reaction and hydrogen oxidation reaction are discussed and compared. Research directions on the further development of active, stable, and low-cost electrocatalysts to meet the ultimate commercialization of PEMFCs and AMFCs are also discussed.