Enantioselective Recognition of Chiral Tryptophan with Achiral Glycine through the Strategy of Chirality Transfer

A colorimetric and photothermal dual-mode chiral sensor based on CuS-L-histidine for optical resolution of aspartic acid isomers

As the chiral source, L-histidine (L-His) is used for the decoration of copper sulfide nanoparticles (CuS NPs), which is further utilized to fabricate a colorimetric and photothermal dual-mode chiral sensor for the optical resolution of aspartic acid (Asp) isomers. Since the optical activity of L-His is consistent with L-Asp, the CuS-L-His shows higher affinity for L-Asp than D-Asp, and thus more 3,3',5,5'-tetramethylbenzidine (TMB) is captured by CuS-L-His/L-Asp through electrostatic attractions compared with CuS-L-His/D-Asp. Owing to the superior peroxidase-like activity of CuS NPs, the captured TMB can be catalyzed to blue oxidized TMB (oxTMB) in the presence of H2O2, and thus the optical resolution of the Asp isomers can be realized by the colorimetric mode. In addition, the nanosized CuS has outstanding photothermal conversion ability, and the combination with Asp isomers may lead to the decrease in temperature. Since the decrease in the temperature of CuS-L-His/L-Asp is more pronounced than that of CuS-L-His/D-Asp, the Asp isomers can also be optically resolved by the photothermal mode. The proposed dual-mode chiral sensor is more attractive than conventional single-mode chiral sensors, since it can provide higher accuracy for the optical resolution.

Recent advance for enantiorecognition of chiral drugs sensing: Electrochemical, electrochemiluminescent and photoelectrochemical application

Chiral isomers show different behaviours and properties in physiological activities. It is of great significance to find productive approach to realize the recognition of enantiomers, which is a key issue in biochemical and pharmaceutical fields. Nowadays, chiral identification can be successfully achieved according to the discrepancies of special signals correlated with different enantiomers of multiple electrode structures. Electrochemical technologies have attracted wide interest in enantioselective analysis because of its unique merits, such as the economic and miniaturized instruments, simplified and environmental-friendly sample preparations. This review summarizes the development trends of electrochemical sensing in the enantiospecific analysis of chiral drugs, expounds the enantiospecific recognition mechanism between chiral selector and target enantiomers based on general electrochemical, electrochemiluminescent and photoelectrochemical sensors, respectively. In addition, this review attempts to predict the future application of electrochemical, electrochemiluminescent and photoelectrochemical-based technologies in the enantioselective recognition and detection.

Single-Template Molecularly Imprinted Chiral Sensor for Enantioselective Recognition of Various Chiral Amino Acids Based on a Dummy Template Strategy

Designing single-template molecularly imprinted chiral sensors for the enantioselective recognition of various chiral amino acids (AAs) is of great importance for chiral analysis. Here, a dummy template-based chiral sensor is developed by using l-alanine (l-Ala) as the dummy template and poly(o-phenylenediamine) as the imprinting layer, which can be used for the enantioselective recognition of various chiral AAs such as Ala, tryptophan (Trp), tyrosine (Tyr), cysteine (Cys), and arginine (Arg). Compared with conventional single-template molecularly imprinted chiral sensors, the designed single-template chiral sensor shows great universality for the recognition of chiral AAs since all chiral AAs possess an Ala-analogous segment. Also, in this work, it is found that the enantioselective recognition of different chiral AAs is greatly influenced by the sizes and isoelectric points of the AAs.

From individuals to families: design and application of self-similar chiral nanomaterials

Establishing an intimate relationship between similar individuals is the beginning of self-extension. Various self-similar chiral nanomaterials can be designed using an individual-to-family approach, accomplishing self-extension. This self-similarity facilitates chiral communication, transmission, and amplification of synthons. We focus on describing the marriage of discrete cages to develop self-similar extended frameworks. The advantages of utilizing cage-based frameworks for chiral recognition, enantioseparation, chiral catalysis and sensing are highlighted. To further promote self-extension, fractal chiral nanomaterials with self-similar and iterated architectures have attracted tremendous attention. The beauty of a fractal family tree lies in its ability to capture the complexity and interconnectedness of a family's lineage. As a type of fractal material, nanoflowers possess an overarching importance in chiral amplification due to their large surface-to-volume ratio. This review summarizes the design and application of state-of-the-art self-similar chiral nanomaterials including cage-based extended frameworks, fractal nanomaterials, and nanoflowers. We hope this formation process from individuals to families will inherit and broaden this great chirality.

Exploring enantioselective recognition of dTMP-Co-bpe coordination polymer for natural amino acids using molecular simulations and circular dichroism

The 1D homochiral coordination polymer (CP-1) {[Co(dTMP)(bpe)2(H2O)3]·9H2O}n was constructed by using 2'-deoxy thymidine 5'-monophosphate disodium salt (dTMP·2Na), and auxiliary ligand bpe (1,2-bis(4-pyridyl)ethene) and characterized by single-crystal XRD, PXRD, IR, UV-visible, CD and TGA analyses. Molecular simulations revealed the selective chiral behaviour of CP-1 towards phenylalanine and histidine, as indicated by their higher binding free energies compared to other amino acids. Theoretical parameters were also compared with experimental UV-visible verdicts. Notably, the D-enantiomers of phenylalanine and histidine demonstrated strong bonding abilities and optimal configurations for probing and distinguishing them from their L-counterparts. These findings led to propositions suggesting that the dissimilarities between these D and L amino acid forms and their binding orientations with CP-1 may contribute to alterations in the CD signal. CP-1 exhibited a robust inherent circular dichroism (CD) signal in aqueous solutions, modulated by the presence of specific amino acids, namely D/L phenylalanine and D/L histidine. Leveraging the measurement of CD signal intensity, a sensor capable of detecting unmodified amino acids has been developed. Unlike previously reported approaches that relied on complex chemical reactions between initially CD-silent molecules and probed amino acids, this new method offers a more straightforward means of amplifying the CD signal. Consequently, this change facilitates a more accurate differentiation between the enantiomers of these specific amino acids compared to others.

A porous aromatic cage-based electrochemical sensor for enantioselective recognition of DOPA

An electrochemical sensor based on porous aromatic cages was reported, which can achieve chiral sensing of DOPA enantiomers. The prepared sensor can achieve a recognition efficiency of up to 2.6 for DOPA enantiomers. The enhanced recognition efficiency could be attributed to the cooperation of intermolecular interactions, and the efficient charge transfer process.

Enhanced Replenishment of Active Lattice Oxygen Using Chiral Copper Oxide

Effective catalytic performance of the transition metal oxide is attributed to high specific surface areas, abundant surface oxygen atoms, and balanced valence ratios. Although the chirality of the transition metal has attracted attention, most studies have focused on optical application. A few chiral transition metal oxides were used as electrocatalysts and photocatalysts. The influence of the chiral catalysts on the thermal catalysis process has been less explored. In this study, Mn-loaded chiral (M/l-CuO and M/d-CuO) and achiral CuO (M/a-CuO) were synthesized and compared in the catalytic oxidization of toluene. Spectrally analyzed Mn was well-dispersed on both chiral and achiral CuO. l-CuO and d-CuO showed nanoflower-like chirality. The angles between each (001) plane of CuO were the source of chirality. The toluene turnover frequency (TOF) of the samples was in the order of Mn/d-CuO (5.6 × 10-5 s-1) > Mn/l-CuO (4.4 × 10-5 s-1) > Mn/a-CuO (3.2 × 10-5 s-1) at 240 °C, consistent with the order of the oxygen replenishment rate. The as-prepared catalysts had similar ratios of lattice oxygen/surface adsorbed oxygen, Mn3+/Mn4+, and Cu+/Cu2+. A higher TOF was attributed to chirality, which increased the lattice oxygen replenishment speed from the gaseous phase to the solid surface. Our study indicates gas-solid catalysis from a structure-activity viewpoint.

Visual and electrochemical chiral discrimination of tryptophan isomers with shikimic acid chiral ionic liquids-copper ions complex

Efficient discrimination of amino acids (AAs) isomers is of significant importance for life science and analytical chemistry. Here, a dual-mode chiral discrimination strategy is proposed for visual and electrochemical chiral discrimination of tryptophan (Trp) isomers. Shikimic acid chiral ionic liquids (SCIL) is coordinated with copper ions (Cu2+), and the obtained SCIL-Cu2+ can form ternary complexes with the Trp isomers. Owing to the inherent chirality of SCIL and the reverse homochirality of L-Trp and D-Trp, the ternary complex of SCIL-Cu-D-Trp has higher stability than SCIL-Cu-L-Trp, as revealed by the calculated stability constants (K) and changes in Gibbs free energy (ΔG). The difference in the stability can be utilized for the chiral discrimination of L-Trp and D-Trp, resulting in discernible differences in colors and the electrochemical signals of the Trp isomers. Besides Trp, the isomers of phenylalanine (Phe) can also be discriminated by the proposed dual-mode chiral discrimination strategy with the SCIL-Cu2+ complex.

Chiral Assembly of Perovskite Nanocrystals: Sensitive Discrimination of Amino Acid Enantiomers

Chirality is a widespread phenomenon in nature and in living organisms and plays an important role in living systems. The sensitive discrimination of chiral molecular enantiomers remains a challenge in the fields of chemistry and biology. Establishing a simple, fast, and efficient strategy to discriminate the spatial configuration of chiral molecular enantiomers is of great significance. Chiral perovskite nanocrystals (PNCs) have attracted much attention because of their excellent optical activity. However, it is a challenge to prepare perovskites with both chiral and fluorescence properties for chiral sensing. In this work, we synthesized two chiral fluorescent perovskite nanocrystal assembly (PNA) enantiomers by using l- or d-phenylalanine (Phe) as chiral ligands. PNA exhibited good fluorescence recognition for l- and d-proline (Pro). Homochiral interaction led to fluorescence enhancement, while heterochiral interaction led to fluorescence quenching, and there is a good linear relationship between the fluorescence changing rate and l- or d-Pro concentration. Mechanism studies show that homochiral interaction-induced fluorescence enhancement is attributed to the disassembly of chiral PNA, while no disassembly of chiral PNA was found in heterochiral interaction-induced fluorescence quenching, which is attributed to the substitution of Phe on the surface of chiral PNA by heterochiral Pro. This work suggests that chiral perovskite can be used for chiral fluorescence sensing; it will inspire the development of chiral nanomaterials and chiral optical sensors.

A sensitive electrochemical sensor for chiral detection of tryptophan enantiomers by using carbon black and β‑cyclodextrin

A chiral sensor for the electrochemical identification of tryptophan (Trp) isomers is described. The electrochemical sensor was prepared based on the combination of (a) carbon black (CB-COOH) as conductive material, (b) Cu2+-modified β-cyclodextrin (Cu-β-CD), and (c) β-CD-based metal-organic frameworks (β-CD-MOF) as chiral selectors. The Cu-β-CD can be self-assembled into the CB-COOH and β-CD-MOF through electrostatic interactions, which was characterized by zeta potential analysis. UV-vis spectroscopy proved that Cu-β-CD displays a higher combination for D-Trp than L-Trp, and the β-CD-MOF at the surface of the GCE has a higher affinity for L-Trp than D-Trp, which endow an easier permeation of L-Trp to the surface of the electrode, thus leading to a larger electrochemical signal of differential pulse voltammetry (DPV). The enantioselectivity for L-Trp over D-Trp (IL/ID) is 2.13, with a low detection limit for D-Trp (11.18 μM) and L-Trp (5.48 μM). In addition, the proposed chiral sensor can be chosen to determine  the percentage of D-Trp in enantiomer mixture solutions and real sample detection with a recovery from 98.2 to 102.8% for L-Trp and 97.9 to 101.1% for D-Trp.

Development of a chiral electrochemical sensor based on copper-amino acid mercaptide nanorods for enantioselective discrimination of tryptophan enantiomers

Chirality is an important property of nature and it regulates fundamental phenomena in nature and organisms. Here, we develop a chiral electrochemical sensor based on copper-amino acid mercaptide nanorods (L-CuCys NRs) to discriminate tryptophan (Trp) isomers. The chiral L-CuCys NRs are prepared in alkaline solution based on the facile coordination reaction between the sulfhydryl groups of L-Cys and copper ions. Since the stability constant (K) of L-CuCys NRs with L-Trp (752) are much higher than that of L-CuCys NRs with D-Trp (242), the cross-linking bonds between L-CuCys NRs and L-Trp are more stable than those between L-CuCys NRs and D-Trp. Consequently, this electrochemical sensor can selectively recognize the Trp isomers with an enantiomeric electrochemical difference ratio (IL-Trp/ID-Trp) of 3.22, and it exhibits a detection limit of 0.26 μM for L-Trp. Moreover, this electrochemical sensor can quantitatively measure Trp isomers in complex samples. Importantly, this electrochemical sensor has the characteristics of high stability, good repeatability, easy fabrication, low cost, and efficient discrimination of tryptophan (Trp) isomers.

Green Synthesis and Bioactivity of Aliphatic N-Substituted Glycine Derivatives

Standard amino acids have an asymmetric α-carbon atom to which -COOH, -NH2, -H, and -R groups are bonded. Among them, glycine is the simplest (R = -H) with no asymmetric carbon, and other natural amino acids are C-substituted of glycine. Here, we have designed and made a green synthesis of some new N-substituted glycine derivatives with R-(NH)CH2-COOH formula, where R is flexible and hydrophobic with different chain lengths and benches of the type propyl, butyl, sec-butyl, tert-butyl, pentyl, isopentyl, tert-pentyl, hexyl, 2-aminoheptyl, and octyl. These glycine derivatives were characterized by recording their melting points and FT-IR, mass, 1H NMR, and 13C NMR spectra. DFT studies revealed that 2-aminoheptyl glycine had the highest electronegativity value and can thus act as a good bidentate ligand for the metal centers. ADME comparative results and bioavailability radars indicated that both octyl- and 2-aminoheptyl glycine had the most lipophilicity, making them good agents in cell passing. Furthermore, lipophilicity determination showed that octyl glycine was the best and propylgly was more soluble than others. Based on solubility, lipophilicity, and dipole moment values, propyl- and 2-aminoheptyl-glycine were considered for bio-macromolecular interaction studies. Thus, the interaction of these two agents with DNA and HSA was studied using absorption spectroscopy and circular dichroism techniques. Due to the presence of the R-amine group, they can interact with the DNA by H-binding and hydrophobicity, while electrostatic mode could not be ruled out. Meanwhile, molecular docking studies revealed that octyl- and 2-aminoheptyl glycine had the highest negative docking energy, which reflects their higher tendency to interact with DNA. The DNA binding affinity of two candidate AAs was determined by viscosity measurement and fluorescence emission recording, which confirms that groove binding occurs. Also, the toxicity of these synthesized amino acid derivates was tested against the human foreskin fibroblast (HFF) cell line. They showed IC50 values within the range of 127-344 μM after 48 h with the highest toxicity for 2-aminoheptyl glycine.

Construction of chiral capillary electrochromatography microsystems based on Aspergillus sp. CM96

Novel chiral capillary electrochromatography (CEC) microsystems were constructed based on Aspergillus sp. CM96. As a newly discovered intrinsic characteristic of the cell, cell chirality occupies an essential position in life evolution. Aspergillus sp. CM96 spore (CM96s) was chosen as a proof of concept to develop chiral capillary columns. Interestingly, various types of amino acid (AA) enantiomers were baseline separated under the optimized conditions. Furthermore, the time-dependent chiral interactions between AAs and CM96s were explored in a wider space. Pectinases generated from Aspergillus sp. CM96 fermentation were immobilized onto graphene oxide-functionalized capillary silica monoliths for separating AA enantiomers. Molecular docking simulations were performed to explore chiral separation mechanisms of pectinase for AA enantiomers. These results indicated that Aspergillus sp. CM96-based CEC microsystems have a significant advantage for chiral separation.

Chiral MOFs encapsulated by polymers with poly-metallic coordination as chiral biosensors

Chiral materials have drawn the widespread attention for their its chiral recognition ability. The design and synthesis of chiral material are of importance owing to the unpredictability in controlling chirality during the synthesis process. To circumvent problems, a chiral MOF (D-His-ZIF-8) was synthesized by ligand exchange of 2-methylimidazole (Hmim) on ZIF-8 by D-histidine (D-His), which can be treated as chiral host to distinguish amino acid enantiomers. The obtained D-His-ZIF-8 can provide chiral nanochannels for amino acid guests. Meanwhile, polynary transition-metal ion (Co²⁺ and Fe³⁺) coordinating with polydopamine (PDA) wrapped on the surface of D-His-ZIF-8 can increase the active sites. The electrochemical chiral recognition behavior showed that D-His-ZIF-8@CoFe-PDA exhibited good recognition of the tryptophan enantiomer (L/D-Trp) (working potential of -0.2 V vs. Hg/HgCl₂). The LOD and LOQ of L-Trp were 0.066 mM and 0.22 mM, respectively, while the LOD and LOQ of D-Trp were 0.15 mM and 0.50 mM, respectively. Finally, the usefulness of D-His-ZIF-8@CoFe-PDA/GCE was evaluated with a recovery of 94.4-103%. The analysis of real  samples shows that D-His-ZIF-8@CoFe-PDA/GCE is a feasible sensing platform for the detection of L-Trp and D-Trp.

Kanamycin triggered nanozyme for homogeneous and amplified colorimetric detection of T4 polynucleotide kinase

It is of significance to develop efficient methods for detecting the activity of T4 polynucleotide kinase (T4 PNK) due to its essential role in the modulation of different life activities. In this work, we constructed a novel nanozyme using Kanamycin (KANA) as a trigger for the [Fe(CN)₆]^3- coordinated Cu₂(OH)₃NO₃ (Cu₂(OH)₃NO₃/[Fe(CN)₆]^3-) nanorods, and designed an amplified colorimetric method to detect T4 PNK. That was, the free KANA efficiently triggered the peroxidase-like activity of Cu₂(OH)₃NO₃/[Fe(CN)₆]^3-, while the bound KANA by its aptamer lost the stimulative capability for the nanomaterials. On the basis of the bioreaction regulated generation of the KANA aptamer, a highly sensitive colorimetric assay aided by the rolling circle amplification (RCA) reaction for the detection of T4 PNK was realized. Results showed that this assay can detect T4 PNK from 1.0 × 10^-3 to 10.0 U/mL, with a limit of detection (LOD) of 1.42 × 10^-4 U/mL. The assay also showed acceptable performance in the detection of T4 PNK in serum samples. In addition to the satisfactory sensitivity and selectivity, the displayed T4 PNK assay also presented merits of operational convenience, without labeling or immobilization process and did not require costly instrument. It is expected that the KANA as a stimulator would have extended biosensing applications by coupling various bioreactions that can produce the KANA aptamer.

Highly Efficient versus Null Electrochemical Enantioselective Recognition Controlled by Achiral Colinkers in Homochiral Metal-Organic Frameworks

Chiral materials capable of electrochemical enantiomeric recognition are highly desirable for many applications, but it is still very challenging to achieve high recognition efficiency for lack of the knowledge of structure-property relationships. Here, we report the completely distinct enantiomeric recognition related to slightly different achiral colinkers in isomorphic homochiral metal-organic frameworks with the same chiral linker. Cu-TBPBe, for which the achiral colinker has two pyridyl rings connected by ─CH═CH─, shows excellent enantioselectivity and sensitivity for electrochemical recognition of l-tryptophan (Trp) with a detection limit of 3.16 nM. The l-to-d ratio of differential pulse voltammetric (DPV) currents reaches 53, which is much higher than the values (2-14) reported for previous electrochemical sensors. By contrast, Cu-TBPBa, in which the achiral colinker has -CH₂-CH₂- between pyridyl rings, is incapable of discrimination between l-Trp and d-Trp. Structural and spectral analyses suggest that the achiral conjugated colinker and the chiral moieties around it cooperate to produce a chiral pocket in favor of enantioselective adsorption through multiple hydrogen-bonding and π-π stacking interactions. The work demonstrated that Cu-TBPBe can be used to fabricate reliable electrochemical sensors for ultrasensitive quantification of Trp enantiomers in racemic mixtures and in complex biological systems such as urine. The work also highlights that an achiral coligand can be of vital importance in determining enantiomeric discrimination, opening up a new avenue for the design of chiral sensing materials.

Chiral template-induced porphyrin-based self-assembled materials for electrochemical chiral sensing

Chirality plays a key role in many fields of natural sciences as well as life sciences. Chiral materials are widely developed and used for electrochemical chiral recognition. In recent years, carbon quantum dots (CQDs) have been widely used as a novel carbon nanomaterial due to their excellent charge transfer properties, good biocompatibility, and low cost. The special structure of π-conjugated porphyrin attracts attention. Supramolecular self-assembly shows a way to construct chiral materials by self-assembling simple molecules into chiral composites. Herein, we demonstrate the self-assembly of achiral porphyrins induced by chiral carbon quantum dots assembled from L- and or D-tryptophan (L- and or D-Trp) with carbon quantum dots, resulting in 5,10,15,20-tetrakis (4-carboxyPheyl) (TCPP) self-assembled structure. The electrochemical chiral recognition of chiral self-assembled materials was studied using Phenylalanine (Phe) enantiomer as a chiral analyte. Electrochemical chiral recognition results showed that the chiral self-assembled materials induced by chiral templates have a good ability to discriminate Phe enantiomers. Therefore, this research provides a new idea for the synthesis of chiral composites and further expands applications to electrochemical chiral recognition.

TiO2 Nanotubes Decorated with CdSe Quantum Dots: A Bifunctional Electrochemiluminescent Platform for Chiral Discrimination and Chiral Sensing

Chiral analysis is of significant importance for living organisms since chirality is the fundamental phenomenon in nature. In this work, a bifunctional electrochemiluminescent (ECL) platform is constructed for chiral discrimination and chiral sensing. 3-Mercaptopropionic acid-functionalized CdSe quantum dots (CdSe QDs) are combined with aminated TiO₂ nanotubes (NH₂-TiNTs) via amidation. The resultant CdSe QDs/TiNTs display significantly enhanced ECL signals due to the synergistic effect between CdSe QDs and TiNTs, which are then used for the chiral discrimination of the isomers of nine chiral amino acids (AAs) in the presence of d-AA oxidase (DAAO). DAAO can selectively catalyze the oxidation of d-AAs to generate H₂O₂, which acts as the coreaction reagent and triggers the ECL signals of CdSe QDs/TiNTs, and thus, the isomers of the nine chiral AAs can be effectively discriminated. In addition, the as-constructed ECL platform can also be used for the sensitive detection of d-AAs in the presence of DAAO with a wide linear range and a low limit of detection. These findings suggest that the CdSe QDs/TiNTs can work as a bifunctional ECL platform (chiral discrimination and chiral sensing), which might be an advanced ECL platform for biomedical applications.

Invoking Cathodic Photoelectrochemistry through a Spontaneously Coordinated Electron Transporter: A Proof of Concept Toward Signal Transduction for Bioanalysis

Most of the cathodic photoelectrochemical (PEC) bioassays rely on electron accepting molecules for signal stimuli; unfortunately, the performances of which are still undesirable. New signal transduction strategies are still highly expected for the further development of cathodic photoelectrochemistry as a potentially competitive method. This work represents a new concept of invoked cathodic photoelectrochemistry by a spontaneously formed electron transporter for innovative operation of the sensing strategy. Specifically, the hexacyanoferrate(II) in solution easily self-coordinated with CuO nanomaterials and formed electron transporting copper hexacyanoferrate (CuHCF) on the surface, which endowed improved carrier separation for presenting augmented photocurrent readout. Exemplified by the T4 polynucleotide kinase (T4 PNK) and its inhibitors as targets, a homogenous cathodic PEC biosensing platform was achieved with the distinctive merits of label-free, immobilization-free, and split-mode readout. The mechanism revealed here provided a totally different perspective for signal transduction in cathodic photoelectrochemistry. Hopefully, it may stimulate more interests in the design and construction of semiconductor/transporter counterparts for exquisite operation of photocathodic bioanalysis.

Ultrasensitive Electrochemical Impedance Chiral Discrimination and Sensing of Tryptophan Isomers Based on Core-Shell-Structured Au-Ag Nanoparticles

Au-Ag nanoparticles (Au-Ag NPs) with a core-shell structure are prepared and used for ultrasensitive electrochemical impedance (EI) discrimination of the isomers of tryptophan (Trp). As revealed by circular dichroism, rotary polarization caused by the Au-Ag NPs is consistent with D-Trp but opposite to L-Trp, and thus, the Au-Ag NPs can selectively combine with D-Trp through preferential interactions. Compared with Au-Ag NPs, the composites of D-Trp and Au-Ag NPs (Au-Ag NPs/D-Trp) display significantly increased charge transfer resistance (R_ct); differently, the R_ct of Au-Ag NPs/L-Trp remains almost unchanged because the Au-Ag NPs exhibit poor affinity toward L-Trp. Therefore, ultrasensitive EI enantiodiscrimination of the isomers of Trp is realized even at an extremely low concentration of the Trp isomers (0.1 nM). In addition, it is successfully applied in the ultrasensitive determination of D-Trp at a low concentration level (0.1 nM∼10 μM).

Electrochemiluminescent chiral discrimination with chiral Ag2S quantum dots/few-layer carbon nitride nanosheets

Well-dispersed chiral Ag₂S quantum dots (Ag₂S QDs) were facilely synthesized by using N-acetyl-L-cysteine (NALC) as the chiral ligand and loaded onto nanosheets of two-dimensional (2D) few-layer carbon nitride (C₃N₄). The resultant nanocomposite (Ag₂S QDs/few-layer C₃N₄) shows enhanced electrochemiluminescence (ECL) while maintaining the chirality of Ag₂S QDs, which can be used for the chiral discrimination of the enantiomers of tyrosine (Tyr). Due to the higher affinity of chiral Ag₂S QDs toward L-Tyr than toward its enantiomer, the ECL intensity of Ag₂S QDs/few-layer C₃N₄ is significantly decreased after its incubation with L-Tyr, and thus the Tyr enantiomers can be discriminated. The developed ECL chiral sensor exhibits high stability and reproducibility. The universality of the ECL chiral sensor for the discrimination of other chiral amino acids is also studied, and the results indicate that it can work only in the case of chiral aromatic amino acids.

Fluorometric discrimination of tyrosine isomers based on the inner filter effect of chiral Au nanoparticles on MoS2 quantum dots

A fluorescent chiral sensor is proposed based on the inner filter effect (IFE) of chiral Au nanoparticles (AuNPs) on MoS2 quantum dots (MoS2 QDs), which can be used for the discrimination of the isomers of tyrosine (Tyr). l-Tyrosine (l-Tyr) can induce obvious agglomeration of the chiral AuNPs, leading to an attenuated IFE of the chiral AuNPs and greatly restored fluorescence of the MoS2 QDs, and thus the enantioselective recognition of the Tyr isomers can be achieved. Also, l-Tyr but not d-Tyr induced agglomeration of the chiral AuNPs is confirmed by the larger association constant between l-Tyr and the chiral sensor.

Chiral voltammetric sensor for tryptophan enantiomers by using a self-assembled multiwalled carbon nanotubes/polyaniline/sodium alginate composite

Due to the crucial role of amino acids in life sciences and pharmaceutics, identification of optical amino acid molecules is of great significance. In this study, the two materials (CNT and PANI) were combined together to obtain the magnification of electrochemical signal by substrate material (CNT/PANI). Then a self-assembled multiwalled carbon nanotubes/polyaniline/sodium alginate (CNT/PANI/SA) nanocomposite with chiral sites and conductive material was synthesized as the electrochemical sensing interface. Next, a novel electrochemical sensing interface was fabricated via modifying the as-prepared chiral material on a polished glassy carbon electrode (CNT/PANI/SA/GCE) for precisely, efficiently, and rapidly differentiation of tryptophan (Trp) enantiomers. It was observed that CNT/PANI/SA/GCE showed desirable stereoselective recognition effect in the variety of signal strength to peak current (Ip) to the different optical activity of Trp enantiomers. In the case of optimal conditions, the peak current ratio in the solution of l-Trp and d-Trp (ID /IL ) was observed to be 2.1 at CNT/PANI/SA/GCE by differential pulse voltammogram (DPV). UV-visible spectroscopy further showed that CNT/PANI/SA had a greater binding energy to l-Trp. Also different factors affecting the enantioselectivity of CNT/PANI/SA/GCE, such as the incubation time, pH, and dropcoating volume of CNT/PANI/SA were optimized. Moreover, the proposed CNT/PANI/SA/GCE showed excellent specific stereoselectivity and anti-interference ability. Besides, the proposed chiral sensing platform can be effectively applied in real samples to detect Trp enantiomers sensitively. This work inspires us a new path for the preparation of substrate material with excellent electrical conductivity, as well as extend its application potential in chiral recognition.