Tunable Competitive Absorption-Induced Signal-On Photoelectrochemical Immunoassay for Cardiac Troponin I Based on Z-Scheme Metal-Organic Framework Heterojunctions

A three-stage amplified pressure bioassay for sensitive detection of cardiac troponin

Cardiac troponin I (cTnI) level in human blood is a key biomarker associated with acute myocardial infarction (AMI). Rapid, convenient, inexpensive and highly sensitive point-of-care (POC) bioassays for cTnI in home and community are of great importance in saving the lives of AMI patients. Herein, we present a three-stage amplified pressure-sensing bioassay system for highly sensitive detection of cTnI. Specifically, the magnetic bead-cTnI-Pt nanoclusters protein complex formed by the immunoconjugation of antigen and antibody can be conveniently subjected to magnetic separation to reduce background interference and achieve first-stage amplification. Then, the Pt nanoclusters in the complex can effectively catalyze the decomposition of H2O2 into O2, thus achieving the secondary amplification of the pressure signal. Finally, the biotin and streptavidin cross-linked Pt nanoclusters significantly increase the amount of catalyst, enabling the tertiary amplification of the bioassay. The method has good linearity in the range of 10 to 1 × 104 pg/mL for quantitative detection, and the detection limit of the method was calculated to be 3.8 pg/mL (in water), which is 30 times more sensitive than the original secondary amplification detection system. In addition, the results of clinical samples tested with the developed method were consistent with those tested with commercial kits. Given the automation, rapid response and miniaturization of pressure-based sensors, our bioassay is expected to be a powerful tool for home and community-based POC diagnosis of patients with various acute diseases in the future.

Target-induced oxygen vacancy on the etching WO3 photoanode for in-situ amplified photoelectrochemical immunoassay

Sluggish charge transfer and rapid electron-hole recombination severely limit the analytical performance of photoelectrochemical (PEC) immunoassays. This work presented a PEC immunosensing strategy that employed a target-induced enzyme-catalyzed reaction to in-situ generate oxygen vacancy (Ov) for amplifying the photocurrent detection of carcinoembryonic antigen (CEA). Concretely, ascorbic acid-2-phosphate (AAP) was catalyzed to produce ascorbic acid (AA) by alkaline phosphatase (ALP) in the presence of CEA. The generated AA could serve as a reducing agent to introduce oxygen vacancy (Ov) into the etching tungsten trioxide (E-WO3) photoanode, resulting in an Ov-enriched E-WO3 (E-WO3-Ov) photoanode. The formation of Ov allowed efficient introduction of defect levels into the energy band structure of E-WO3-Ov photoanode, resulting in high charge transfer and electron-hole separation efficiency for photocurrent amplification. Later, it was applied to fabricate a PEC immunosensor, thus enabling a wide linear range from 0.02 to 80 ng/mL and a low detection limit of 12.9 pg/mL. Overall, this work presented a promising sensing strategy for PEC immunosensors, expanding the scope of potential applications in bioassays and clinical diagnostics.

A Fast Immunosensor Based on Biohybrid Self-Assembled Nanostructures for the Detection of KYNA as a Cerebrospinal Fluid Biomarker for Alzehimer's Disease

Although the role of kynurenic acid (KYNA) is not yet fully understood, recent research has implicated this tryptophan (Trp) metabolite as a significant biomarker in neurodegenerative diseases. In this study, we developed an immunosensor platform based on self-assembled polyelectrolyte multilayers (PEMs), employing an enzyme-labeled immunoreagent in a competitive displacement format that requires only a single wash step. This immunosensor enables the detection of KYNA and Trp with detection limits (LOD) of 9 pg/mL and 1.2 ng/mL, respectively. Results validated by traditional ELISA methods indicated elevated levels of KYNA and an increased KYNA/Trp ratio in the cerebrospinal fluid (CSF) of Alzheimer's patients compared to controls, consistent with previous findings. Additionally, this immunosensor platform can be readily adapted to detect other neuroactive Trp metabolites by substituting specific immunoreagents, supporting a flexible profile-based approach. This platform could serve as a rapid, cost-effective clinical tool for monitoring neurological and psychiatric disorders, potentially advancing therapeutic strategy development.

Organic Molecules as a Bridge Connecting Photoelectrochemistry and Fluorescence for Dual-Signal Assay

We report a strategy based on pyridyl-anchored organic small-molecule fluorescent probes to develop a dual-signal sensing platform. The strategy accomplishes an intelligent integration of fluorescence analysis with photoelectrochemical (PEC) sensing, thereby enabling rapid and precise detection of hypochlorite. In this work, the natural dye chromone was selected as the fluorophore for generating fluorescent signals. Meanwhile, by using phenothiazine (PTZ) as the specific recognition group and pyridine as the anchoring moiety, we designed and synthesized a novel organic small-molecule fluorescent probe. The obtained probe was used as a photosensitive material anchored to the TiO2 surface via N → Ti bonds, to form an FTO/TiO2/FPTZ-1 heterostructure-based dual-signal sensing platform for the detection of hypochlorite. This sensing platform has the characteristics of high specificity, sensitivity, and ease of preparation, enabling rapid qualitative fluorescence readout and quantitative photoelectrochemical readout of hypochlorite, with a limit of detection of 0.288 μM for fluorescence and 1.37 nM for PEC.

Recent advances in microfluidic-based photoelectrochemical (PEC) sensing platforms for biomedical applications

Photoelectrochemical (PEC) techniques seamlessly combine electrochemical and spectroscopic principles, offering a powerful platform for the detection of biomarkers and biological molecules in clinical and biomedical settings. This review provides a comprehensive overview of microfluidic PEC probes, emphasizing their potential for ultrasensitive detection through enhanced light absorption and charge transfer processes. Key advantages of microfluidic PEC include real-time monitoring of biological processes, non-invasive detection, and the possibility of multiplexing when integrated with various quantification modalities. However, the practical implementation of PEC faces challenges such as bulky setup, matrix interference, and stability of PEC-active materials. Also, this paper discusses the intricate mechanisms of PEC sensing, highlighting the roles of nanomaterials in enhancing microfluidic PEC systems. Additionally, the limitations inherent in PEC material selection, including stability and bandgap engineering, are critically discussed. Solutions such as doping and the development of composite materials are proposed to address these issues. Through presented examples of PEC applications in biomedical fields, this review elucidates the future potential of PEC-based methods as reliable and effective tools for diagnostic applications. Additionally, this review proposes the most effective probes for future investigations to develop commercial devices.

Engineered Metal-Organic Frameworks for Targeted CRISPR/Cas9 Gene Editing

The development of precise and efficient delivery systems is pivotal for advancing CRISPR/Cas9 gene-editing technologies, particularly for therapeutic applications. Engineered metal-organic frameworks (MOFs) have emerged as a promising class of inorganic nonviral vectors, offering unique advantages such as tunable porosity, high cargo-loading capacity, and biocompatibility. This review explores the design and application of MOF-based nanoplatforms tailored for the targeted delivery of CRISPR/Cas9 components, aiming to enhance gene-editing precision and efficiency. By incorporating stimuli-responsive linkers and bioactive ligands, these MOFs enable controlled release of CRISPR/Cas9 payloads at the target site. Comparative discussions demonstrate superior performance of MOFs over conventional nonviral systems in terms of stability, transfection efficiency, and reduced off-target effects. Additionally, the intracellular trafficking mechanisms and the therapeutic potential of these platforms in preclinical models are discussed. These findings highlight the transformative potential of MOF-based delivery systems in overcoming the challenges associated with gene-editing technologies, such as immunogenicity and cytotoxicity, paving the way for their application in precision medicine. This review provides a blueprint for the integration of nanotechnology and genome editing, advancing the frontier of nonviral therapeutic delivery systems.

Development of novel poly(1,4-benzenedithiol) nanoparticles@AuNPs lateral flow immunochromatographic test strips

In this study, we successfully developed a novel lateral flow immunochromatography (LFIA) strip that utilizes poly(1,4-benzenedithiol) (PBDT) nanoparticles loaded with gold nanoparticles (PBDT@AuNPs), characterized by a particle size of 147 nm and a spherical morphology, as labeling materials to enhance the sensitivity of colloidal gold. PBDT@AuNPs exhibit a higher loading capacity and molar extinction coefficient compared to traditional markers, with an approximately 22-fold increase in molar extinction coefficient relative to colloidal gold immunochromatography, significantly improving detection sensitivity. Cardiac troponin I (cTnI) was employed as a model to assess the detection efficiency and reliability of PBDT@AuNPs LFIA strips. A calibration curve was established using a four-parameter logistic function to fit the relationship between colloidal gold colorimetric strength and cTnI concentration, covering a range of 0.06 to 500 ng mL-1, with a detection limit of 0.03 ng mL-1 as calculated by the International Union of Pure and Applied Chemistry (IUPAC). A chemical comparison of various cTnI concentrations in human serum samples, conducted using Passing-Bablok regression, confirmed the equivalence of the PBDT@AuNPs LFIA strips with a commercial fluorescent cTnI LFIA kit, revealing no significant systematic or proportional bias. The spike recovery ranged from 91.92% to 108.70%, and the relative standard deviation (RSD) ranged from 5.29% to 5.85%, underscoring the high precision of the PBDT@AuNPs LFIA strips in quantifying cTnI in human serum samples.

A ratiometric electrochemical aptasensor for Ochratoxin A detection based on electroactive Cu-MOF and DNA conjugates resembling the structure of Bidens pilosa

BACKGROUND

Ochratoxin A (OTA) represents a naturally occurring mycotoxin with a serious hazard to the health of individuals because of carcinogenic and teratogenic properties. To date, various analytical methods have been developed for the detection of OTA, among which aptamer-based electrochemical sensing has attracted significant attention due to its rapidity and high sensitivity. As a subtype of aptamer-based electrochemical sensing, ratiometric electrochemical methods further exhibit excellent anti-interference capability. However, their analytical performance remains limited by the labor-intensive and resource-consuming modification of electroactive signal molecules, as well as the restricted specific surface area of the electrodes.

RESULT

Here, we develop a ratiometric electrochemical aptasensor functionalized with Bidens pilosa-like DNA-gold structures and copper-based metal-organic frameworks (Cu-MOFs) for OTA detection. Cu-MOFs served as a substrate for electrode modification, performing two key roles: 1) providing a large surface area for aptamer immobilization, and 2) generating one current signal. Double-stranded DNA-gold nanoparticles (dsDNA-AuNPs) were assembled through Au-S bonding. The dsDNA-AuNPs conjugates, structurally resembling Bidens pilosa, could load more dsDNA and connect to Cu-MOFs via π-π stacking. When OTA was present, the aptamer-OTA complex was stripped from the aptasensor, reducing the amount of Fc-Apt, thus decreasing the corresponding Fc current (IFc). Simultaneously, the decreased interfacial resistance caused an increase in the Cu-MOF current (ICu), providing the decreased IFc/ICu ratio as a quantitative indicator. The aptasensor exhibited a linear detection range from 0.01 ng mL-1 to 300 ng mL-1, with a detection limit of 0.002 ng mL-1 for OTA.

SIGNIFICANCE

The developed electrochemical ratiometric aptasensor demonstrated high reproducibility and stability, and it was successfully applied to maize sample analysis, underscoring its practical applicability. Moreover, it provides a promising strategy for the application of Cu-MOF-based electrochemical aptasensors. Furthermore, the modification procedures of the developed aptasensor were simplified by preparing dsDNA-AuNPs in solution rather than assembling them step-by-step on the electrode surface.

Robust nCuO modulated by defect engineering enhanced photoelectrochemical biosensor for the detection of miRNA-21

Traditional p-type CuO (pCuO), valued for its tunable band gap and p-type conductivity, has been widely used in photoelectrochemical biosensors. However, its weak conductivity leads to unsatisfied photoelectrochemical signals and limits its use in in situ vulcanization reactions. We synthesized n-type CuO (nCuO) with abundant oxygen vacancies through a simple chemical reduction for the first time, which was applied as efficient photoactive material. The resulting nCuO exhibits superior photoelectrochemical performance than pCuO, thanks to enhanced carrier separation facilitated by the oxygen vacancies. Upon miRNA-21 introduction, H₂S was generated, which can react with Cu(II) to form nCuO-pCuS heterojunction on the electrode. Inspiringly, the current increase of nCuO is 2.3 times higher than the pCuO after vulcanization reaction due to the built-in electric field of the nCuO-pCuS heterojunction can promote efficient carrier separation. Under optimal conditions, the biosensor offers excellent analytical performance, with a wide linear range (0.004-400 pM) and a detection limit of 1.8 fM. The integration of oxygen defect engineering and target-triggered vulcanization presents a new strategy for designing high-performance photoelectrochemical biosensors.

Sensitive Electrochemical Immunosensor for Procymidone Detection Based on a Supramolecular Amplification Strategy

A sensitive electrochemical immunosensor for procymidone detection was developed based on a supramolecular amplification strategy. β-Cyclodextrin (β-CD)-based nanomaterials were employed to immobilize ferrocene derivative (FC)-functionalized antibodies/antigens through host-guest interactions. With the presence of procymidone, the formed β-CD-labeled bioconjugates were immobilized on the antibody-modified electrode after the immunoreaction, indicating fabrication of the immunosensor. The FC/β-CD complexes were with multiplex electroactive species and provided more sites for recognition groups, resulting in signal amplification of the sensor. Monitored with differential pulse voltammetry, the proposed immunosensor exhibited a wide linear range from 5 pM to 0.1 μM with a low detection limit (LOD) of 1.67 pM. The as-prepared immunosensor possessed high sensitivity, specificity, and stability and showed great potential for monitoring procymidone in the field of food safety.

Operando Photoelectrochemical Surface-Enhanced Raman Spectroscopy: Interfacial Mechanistic Insights and Simultaneous Detection of Patulin

Comprehending the biosensing mechanism of the biosensor interface is crucial for sensor development, yet accurately reflecting interfacial interactions within actual detection environments remains an unsolved challenge. An operando photoelectrochemical surface-enhanced Raman spectroscopy (PEC-SERS) biosensing platform was developed, capable of simultaneously capturing photocurrent and SERS signals, allowing operando characterization of the interfacial biosensing behavior. Porphyrin-based MOFs (Zr-MOF) served as bifunctional nanotags, providing a photocurrent and stable Raman signal output under 532 nm laser irradiation. Aptamer was used to bridge the Zr-MOF and the silver-encased gold nanodumbbells (AuNDs@AgNPs). The simultaneous in situ acquisition of target-induced PEC and SERS signal responses facilitated the correlation of electron transfer information from the photocurrent with the distance information from the SERS signal. It revealed the biosensing mechanism in which target-induced aptamer conformational bending drove the Zr-MOF to approach the electrode. However, the increase in charge transfer observed through conventional electrochemical methods contradicts the conclusions drawn from the operando PEC-SERS analysis. Comprehensive analysis indicated that redox probes introduced during the non-in-situ measurement process became adsorbed within the MOF pores, potentially affecting the judgment of the biosensing mechanism. In addition, the operando PEC-SERS biosensor simultaneously obtained two independent signals, providing self-verification to improve the accuracy and reliability of patulin detection. The linear ranges were 1 pg mL-1-10 ng mL-1 for the PEC method and 1 pg mL-1-100 ng mL-1 for the SERS method, respectively. This work provides a powerful tool for determining the interface characteristics of biosensors.

An electrochemical aptasensor based on C-ZIF-67@PAN nanofibers for detection of ampicillin in milk

C-ZIF-67@PAN nanofibers are prepared as an active material for ampicillin (AMP) detection. Metal organic frameworks (MOFs) can provide larger specific surface area and more binding sites. The PAN fiber in the further carbonization process can make ZIF-67 orderly arranged, enhance the conductivity of the material, and make the response more sensitive. Gold nanoparticles are incorporated into the material, and the aptamer is closely combined with the material by using the Au-S bond to further enhance the conductivity of the material. Under optimized conditions, the sensor has a wide detection range (0.001-100 μM) and a low detection limit (0.67 nM). In addition, the C-ZIF-67@PAN@Au@Apta sensor is successfully applied to AMP residues in milk samples with a recovery rate of 92.77-101.95%.

Shadow Effect-Triggered Photosensitive Gate of Organic Photoelectrochemical Transistor for Enhanced Biodetection

The integration of a photosensitive gate into an organic electrochemical transistor has currently emerged as a promising route for biological sensing. However, the modification of the photosensitive gate always involves complex processes, and the degradation of sensitivity of the functional materials under illumination will significantly decrease the stability of the devices. Herein, we designed an organic photoelectrochemical transistor (OPECT) biosensor employing horseradish peroxidase (HRP)@glucose oxidase (GOx)/Pt/n-Si as the photosensitive gate based on the "shadow effect". The glucose-dependent hydrogen peroxide with HRP/GOx was modified on the gate electrode, triggering a biocatalytic precipitation reaction, which induces the illumination contrast, resulting in a biologically gating effect on the corresponding channel current response. Thus, high sensitivity and selectivity in glucose detection of the OPECT devices will be realized. Given the easy fabrication and high stability of the Pt/n-Si electrode, it has great potential to become a superior selectivity as an OPECT gate electrode. This work provides conceptual validation for the study of the interaction between the photosensitive gate based on the "shadow effect" and biomolecular sensing, which can further expand the application of the OPECT biosensors under interior lighting and shadow surroundings.

Design of aggregation-induced emission materials for biosensing of molecules and cells

In recent years, aggregation-induced emission (AIE) materials have gained significant attention and have been developed for various applications in different fields including biomedical research, chemical analysis, optoelectronic devices, materials science, and nanotechnology. AIE is a unique luminescence phenomenon, and AIEgens are fluorescent moieties with relatively twisted structures that can overcome the aggregation-caused quenching (ACQ) effect. Additionally, AIEgens offer advantages such as non-washing properties, deep tissue penetration, minimal damage to biological structures, high signal-to-noise ratio, and excellent photostability. Fluorescent probes with AIE characteristics exhibit high sensitivity, short response time, simple operation, real-time detection capability, high selectivity, and excellent biocompatibility. As a result, they have been widely applied in cellular imaging, luminescent sensing, detection of physiological abnormalities in the human body, as well as early diagnosis and treatment of diseases. This review provides a comprehensive summary and discussion of the progress over the past four years regarding the detection of metal ions, small chemical molecules, biomacromolecules, microbes, and cells based on AIE materials, along with discussing their potential applications and future development prospects.

Magnetism-Functionalized Lanthanide MOF-on-MOF with Plasmonic Differential Signal Amplification for Ultrasensitive Fluorescence Immunoassays

The successful application of fluorescence immunoassays for clinical diagnosis requires stable photoluminescent materials and highly efficient signal amplification strategies. In this work, the magnetism-functionalized lanthanide MOF-on-MOF (Fe3O4@SiO2@MOF-on-MOF) was synthesized through intermolecular (van der Waals) interaction-assisted growth and further homogeneous epitaxial growth, which significantly improved the fluorescence performances and uncovered the underlying mechanism. The quantum chemical theory calculation and experimental studies revealed that the introduced magnetic Fe3O4@SiO2 not only endowed magnetic separation capability but also promoted fluorescence performances, which increased the energy transfer of the intersystem crossing process and suppressed the luminescence of ligands and aggregation-induced quenching. Furthermore, the plasmonic Ag/Au nanocages were developed as highly efficient fluorescence quenchers to improve the sensitivity of the fluorescence immunoassay. On the basis of the proposed differential signal amplification (DSA) strategy, the immunoassay displayed superior detection ability, with a limit of detection of 0.13 pg·mL-1 for severe acute respiratory syndrome coronavirus 2 nucleocapsid protein. The designed magnetic lanthanide MOF-on-MOF and proposed DSA strategy give new insights into ultrasensitive fluorescence immunoassays.

Comprehensive and Sensitive Analysis of Total PAEs Using a Label-Free Zero-Voltage Photoelectrochemical Biosensor

The sensing of phthalate esters (PAEs) is vital for people's health and environmental protection. This study aimed to develop a highly sensitive and selective photoelectrochemical (PEC) biosensor for PAEs analysis in complex samples. The biosensor is based on a CdS nanoparticle/TiO2 nanotube (CdS NP/TiO2 NT) electrode substrate and a truncated PAEs aptamer (PAEs-apt). By exploiting spatial variations in the potential resistance of the sensing interface, the biosensor achieved superior sensitivity in determining the concentration of PAEs compared to the SELEX aptamer. It exhibited a linear correlation in the range of 0.005 to 1 ng/mL with a detection limit of 1.67 ng/L. Furthermore, the biosensor displayed excellent selectivity for PAEs, with an analysis error factor below 0.277 when the concentration of interfering species was 100 times that of the target. The high performance of the biosensor was attributed to the excellent photoelectronic properties of CdS NPs/TiO2 NTs, high density of PAEs-apt for PAEs, high affinity of PAEs-apt for PAEs, and specific recognition of PAEs. Notably, this PEC biosensor could be used for the PAEs assay in urine and water samples, providing a sensitive and simple analytical method for detecting the same class of compounds with similar chemical structures in complex samples.

A sandwich-type photoelectrochemical sensor constructed with a signal amplification strategy based on the upconversion luminescence characteristics of Ag@N-CQDs for sensitive detection of neuron specific enolase

In this paper, Bi2S3/AgBiS2 composite nanomaterials and PDA@Ag@N-CQDs were synthesized, and used as substrates and second antibody label respectively to construct a sandwich photoelectrochemical (PEC) sensor. The upconversion luminescence effect of N-CQDs can convert long wavelength light into short wavelength light that can be utilized by the substrate material, which can provide additional excitation light energy for the substrate material and further enhance the photoelectric response. Besides, Ag has SPR effect and can also promote electron transfer. The proposed sandwich immunosensor achieves detection of NSE in the concentration range of 0.001 ng mL-1 to 100 ng mL-1, with a detection limit of 0.28 pg mL-1 (S/N = 3). What's more, the proposed sensor also exhibits good stability, selectivity, as well as reproducibility, indicating its promising application prospects.

Electroactive Nanomaterials for the Prevention and Treatment of Heart Failure: From Materials and Mechanisms to Applications

Heart failure (HF) represents a cardiovascular disease that significantly threatens global well-being and quality of life. Electroactive nanomaterials, characterized by their distinctive physical and chemical properties, emerge as promising candidates for HF prevention and management. This review comprehensively examines electroactive nanomaterials and their applications in HF intervention. It presents the definition, classification, and intrinsic characteristics of conductive, piezoelectric, and triboelectric nanomaterials, emphasizing their mechanical robustness, electrical conductivity, and piezoelectric coefficients. The review elucidates their applications and mechanisms: 1) early detection and diagnosis, employing nanomaterial-based sensors for real-time cardiac health monitoring; 2) cardiac tissue repair and regeneration, providing mechanical, chemical, and electrical stimuli for tissue restoration; 3) localized administration of bioactive biomolecules, genes, or pharmacotherapeutic agents, using nanomaterials as advanced drug delivery systems; and 4) electrical stimulation therapies, leveraging their properties for innovative pacemaker and neurostimulation technologies. Challenges in clinical translation, such as biocompatibility, stability, and scalability, are discussed, along with future prospects and potential innovations, including multifunctional and stimuli-responsive nanomaterials for precise HF therapies. This review encapsulates current research and future directions concerning the use of electroactive nanomaterials in HF prevention and management, highlighting their potential to innovating in cardiovascular medicine.

Target-Navigated CBT-Cys "Stapling" Coupled with CRISPR/Cas12a Amplification for the Photoelectrochemical Nucleic Acid Assay

Generally, rolling circle amplification (RCA) is based on an enzyme-linked padlock extension reaction. Herein, rapid linking that utilizes click chemistry for joining sticky ends of DNA molecules was developed. The ends of nucleic acid were modified with 2-cyano-6-aminobenzothiazole (CBT) and cystine (Cys-Cys), while glutathione was introduced to break the disulfide bond under target navigation and promote the linkage between CBT and Cys at the terminus of the nucleic acid at pH 7.4. Subsequently, RCA was performed using phi29 polymerase. CRISPR/Cas12a cleavage was triggered by the product of RCA amplification. Assisted by alkaline phosphatase, the electron exchange process between the photoelectroactive Sb@Co(OH)F nanorod and p-aminophenol (p-AP) was collected in the form of photoelectrochemical (PEC) signals. Mass spectrometry, gel electrophoresis, and PEC signals were employed to verify the linking process and the RCA coupled with CRISPR/Cas12a cleavage amplification. CBT-Cys connection exhibited a high reaction rate (23.79 M-1·s-1). This enzyme-free linking process was superior to traditional enzyme catalysis in terms of the reaction environment and linking rate. This efficient nonenzymatic joining system holds great potential for constructing nonhomologous end joining, modifying DNA with molecules, and facilitating nucleic acid-protein modification processes.

A ratiometric fluorescent probe based on UiO-66-TCPP for selective and visual detection of quercetin in food

Quercetin (QCT) is a flavonoid with significant health benefits, necessitating sensitive detection methods for food safety and quality control. This study presents a novel UiO-66-TCPP ratiometric fluorescent probe for the quantitative and visual detection of QCT. Under optimal conditions, the fluorescence intensity of UiO-66-TCPP decreased linearly with increasing QCT concentration, with a detection limit of 26 nM. The probe demonstrated high specificity, showing no significant interference from various substances and QCT analogues. Practical applicability was confirmed by testing artificially contaminated juice samples, achieving recovery rates between 98.0% and 104.8%. Furthermore, a paper-based sensor was developed by incorporating UiO-66-TCPP onto Whatman#1 chromatography paper. This sensor exhibited stable fluorescence and a reliable, sensitive visual response to QCT concentrations, detectable via a smartphone-based color recognizer application. The UiO-66-TCPP ratiometric fluorescent probe provides a sensitive, specific, and practical method for detecting QCT in food matrices, offering significant potential for both laboratory and on-site applications.

Deep learning assisted quantitative detection of cardiac troponin I in hierarchical dendritic copper-nickel nanostructure lateral flow immunoassay

The rising demand for point-of-care testing (POCT) in disease diagnosis has made LFIA sensors based on dendritic metal thin film (HD-nanometal) and background fluorescence technology essential for rapid and accurate disease marker detection, thanks to their integrated design, high sensitivity, and cost-effectiveness. However, their unique 3D nanostructures cause significant fluorescence variation, challenging traditional image processing methods in segmenting weak fluorescence regions. This paper develops a deep learning method to efficiently segment target regions in HD-nanometal LFIA sensor images, improving quantitative detection accuracy. We propose an improved UNet++ network with attention and residual modules, accurately segmenting varying fluorescence intensities, especially weak ones. We evaluated the method using IoU and Dice coefficients, comparing it with UNet, Deeplabv3, and UNet++. We used an HD-nanoCu-Ni LFIA sensor for cardiac troponin I (cTnI) as a case study to validate the method's practicality. The proposed method achieved a 96.3% IoU, outperforming other networks. The R2 between characteristic quantity and cTnI concentration reached 0.994, confirming the method's accuracy and reliability. This enhances POCT accuracy and provides a reference for future fluorescence immunochromatography expansion.

Self-shedding MOF-nanocarriers modulated CdS/MoSe2 heterojunction activity through in-situ ion exchange: An enhanced split-type photoelectrochemical sensor for deoxynivalenol

Deoxynivalenol (DON), a mycotoxin produced by Fusarium, poses a significant risk to human health and the environment. Therefore, the development of a highly sensitive and accurate detection method is essential to monitor the pollution situation. In response to this imperative, we have devised an advanced split-type photoelectrochemical (PEC) sensor for DON analysis, which leverages self-shedding MOF-nanocarriers to modulate the photoelectric response ability of PEC substrate. The PEC sensing interface was constructed using CdS/MoSe2 heterostructures, while the self-shedding copper peroxide nanodots@ZIF-8 (CPNs@ZIF-8) served as the Cu2+ source for the in-situ ion exchange reaction, which generated a target-related signal reduction. The constructed PEC sensor exhibited a broad linear range of 0.1 pg mL-1 to 500 ng mL-1 with a low detection limit of 0.038 pg mL-1, demonstrating high stability, selectivity, and proactivity. This work not only introduces innovative ideas for the design of photosensitive materials, but also presents novel sensing strategies for detecting various environmental pollutants.

Laser-induced CdS/TiO2/graphene dual photoanodes for ratiometric self-powered photoelectrochemical sensor: an innovative approach for aflatoxin B1 detection

A ratiometric self-powered photoelectrochemical sensor based on laser direct writing technology was constructed to address the problem that the conventional single-signal detection mode was susceptible to the influence of instrumentation and environmental factors, which interfered with the detection results. Laser-induced CdS/TiO2/Graphene was prepared as dual photoanodes (PA1 and PA2), which were controlled by multiplexed switches to form a photocatalytic fuel cell with Pt cathode. By modifying the aptamer of aflatoxin B1 (AFB1) on the photoanode surface, the target was specifically captured to the electrode surface to form a biological complex, which increased the steric hindrance and affected the electron transfer, thus reducing the output signal of the sensor. Targets with different concentrations were incubated on the surface of PA1, and targets with fixed concentrations were incubated on the surface of PA2. Under the control of the multiplex switch, the output signals of the two photoanodes were recorded, and the ratio of these two signals was used as the basis for the quantitative detection of AFB1. The sensor output was linearly increasing with the logarithm of AFB1 concentration from 1.0 to 150 ng mL-1 and the detection limit was 0.0974 ng mL-1. Additionally, this method had good stability, fast response, and good selectivity to real samples, providing an effective method for food safety monitoring.

Target-Triggered Multiple-Polarity-Switchable Multiplexed Photoelectrochemical Platform

Convenient and accurate quantification of disease-relevant multitargets is essential for community disease screening. However, in the field of photoelectrochemical (PEC) sensors for multisubstance detection, research on the continuous detection of multiple targets using a polarity-switching mode is scarce. In this study, a multiplexed PEC bioassay was developed based on a target-triggered "anodic-cathodic-anodic" multiple-polarity-switchable mode. Employing miRNA-21 and miRNA-141 as model analytes, the photosensitive material combinations of Cu2O/gold nanoparticles (AuNPs)/TiO2 and CdS/AuNPs/TiO2 were successively formed through the specific binding of different whisker branches of Whisker-DNA to Cu2O-H1 and the CdS-tripod DNA ring, respectively. This process reverses the photocurrent polarity from anodic to cathodic and then back to anodic upon detecting different targets, resulting in the high-sensitivity quantification of various biological targets with reduced interference. To enhance the device's utility and affordability in community disease screening, integrating a capacitor and a multimeter-smartphone connection simplifies the assembly and reduces costs. In developing the PEC sensor, the device demonstrated linear detection ranges for miRNA-21 and miRNA-141 from 0.01 fM to 10 nM. Detection limits for miRNA-21 and miRNA-141 were established at 3.2 and 4.3 aM, respectively. The innovative target-triggered multiple-polarity-switchable mode offers adaptability for other multitarget detections by simply modifying the structure of the whisker branches and the combination of photosensitive materials.

Molecule Engineering Metal-Organic Framework-Based Organic Photoelectrochemical Transistor Sensor for Ultrasensitive Bilirubin Detection

The functionalization of metal-organic frameworks (MOFs) with organic small molecules by in situ postsynthetic modification has garnered considerable attention. However, the precise engineering of recognition sites using this method remains rarely explored in optically controlled bioelectronics. Herein, employing the Schiff base reaction to embed the small molecule (THBA) into a Zr-MOF, we fabricated a hydroxyl-rich MOF on the surface of titanium dioxide nanorod arrays (U6H@TiO2 NRs) to develop light-sensitive gate electrodes with tailored recognition capabilities. The U6H@TiO2 NR gate electrodes were integrated into organic photoelectrochemical transistor (OPECT) sensing systems to tailor a sensitive device for bilirubin (I-Bil) detection. In the presence of I-Bil, coordination effects, hydrogen bonding, and π-π interactions facilitated strong binding between U6H@TiO2 NRs and the target I-Bil. The electron-donating property of I-Bil influenced the gate voltage, enabling precise control of the channel status and modulation of the channel current. The OPECT device exhibited exceptional analytical performance toward I-Bil with wide linearity ranging from 1 × 10-16 to 1 × 10-9 M and a low limit detection of 0.022 fM. Leveraging the versatility of small molecules for boosting the functionalization of materials, this work demonstrates the great potential of the small molecule family for OPECT bioanalysis and holds promise for the advancement of OPECT sensors.

Integrated magneto-plasmonic nanostructures-based immunoassay for galectin-3 detection

Cardiovascular diseases remain a leading cause of global mortality, highlighting the need for accurate diagnostic tools and the detection of specific cardiac biomarkers. Surface-enhanced Raman scattering (SERS) spectroscopy has proved to be a promising alternative diagnostic tool to detect relevant biomarkers compared to traditional methods. To our knowledge, SERS methodology has never been used to detect galectin-3 (Gal-3), a crucial biomarker for cardiovascular conditions. Our study aimed to develop plasmonic and magneto-plasmonic nanoplatforms for the sensitive immunodetection of Gal-3 using SERS. Spherical gold nanoparticles (AuNPs) were synthesized and functionalized with 11-mercaptoundecanoic acid (MUDA) to enable antibody binding and 4-mercaptobenzoic acid (4MBA) that served as a Raman reporter due to its intense Raman signal. Following bioconjugation with Gal-3 antibody, the AuNPs were employed in the immunodetection of Gal-3 in phosphate-buffer saline (PBS) solution, offering a limit of detection (LOD) of 12.2 ng mL-1 and a working range up to 120 ng mL-1. Furthermore, our SERS-based immunosystem demonstrated selectivity for Gal-3 (40 ng mL-1) in the presence of other biomolecules such as α-amylase, bovine serum albumin and human C-reactive protein. As a proof of concept, we developed magneto-plasmonic nanoparticles composed of silica-coated magnetite decorated with the bioconjugated AuNPs aimed at enhancing the uptake and detection of Gal-3 via SERS coupled with Raman imaging. Our findings underscore the potential of SERS-based techniques for the sensitive and specific detection of biomarkers, holding significant implications for improved diagnosis and surveillance of cardiovascular diseases. Future research will focus on further optimizing these nanoplatforms and their translation into clinical settings.

Liquid Redox Probe-Free Plastic Antibody Development for Malaria Biomarker Recognition

Malaria is a major public health challenge worldwide and requires accurate and efficient diagnostic methods. Traditional diagnostic approaches based on antigen-antibody interactions are associated with ethical and economic concerns. Molecularly imprinted polymers (MIPs) offer a promising alternative by providing a complementary polymer structure capable of selectively binding target molecules. In this study, we developed a liquid, redox-probe-free, MIP-based electrochemical biosensor to detect the Plasmodium falciparum malaria marker histidine-rich protein (HRP2) at the point-of-care (PoC). The imprinting phase consists of the electropolymerization of the monomer methylene blue (MB) in the presence of the target protein HRP2 at the working electrode (WE) of the modified carbon screen printed electrode (C-SPE). Subsequent removal of the protein with proteinase K and oxalic acid yielded the MIP material. The sensor assembly was monitored by cyclic voltammetry (CV), Raman spectroscopy and scanning electron microscopy (SEM). The analytical performance of the biosensor was evaluated by square-wave voltammetry (SWV) using calibration curves in buffer and serum with a detection limit of 0.43 ± 0.026 pg mL-1. Selectivity studies showed minimal interference, indicating a highly selective assay. Overall, our approach to detect the HRP2 infection marker offers simplicity, cost-effectiveness and reliability. In particular, the absence of a redox solution simplifies detection, as the polymer itself is electroactive and exhibits oxidation and reduction peaks.

Host-Guest Interaction Mediated Perovskite@Metal-Organic Framework Z-Scheme Heterojunction Enabled Paper-Based Photoelectrochemical Sensing

Exploring the high-performance photoelectronic properties of perovskite quantum dots (QDs) is desirable for paper-based photoelectrochemical (PEC) sensing;however, challenges remain in improving their stability and fundamental performance. Herein, a novel Z-scheme heterostructure with host-guest interaction by the confinement of CH3NH3PbBr3 QDs within Cu3(BTC)2 metal-organic framework (MOF) crystal (MAPbBr3@Cu3(BTC)2) is successfully constructed on the paper-based PEC device for ultrasensitive detection of Ochratoxin A (OTA), with the assistance of the exciton-plasmon interaction (EPI) effect. The host-guest interaction is estabilished by encapsulating MAPbBr3 QDs as guests within Cu3(BTC)2 MOF as a host, which prevents MAPbBr3 QDs from being damaged in the polar system, offering access to long-term stability with high-performance PEC properties. Benefiting from the precise alignment of energy levels, the photogenerated charge carriers can migrate according to the Z-scheme charge-transfer pathway under the driving force of the internal electric field, achieving a high photoelectric conversion efficiency. Upon OTA recognition, the EPI effect is activated to modulate the exciton response in MAPbBr3 QDs by accelerating radiative decay, finally achieving sensitive OTA sensing with a detection limit of 0.017 pg mL-1. We believe this work renders new insight into designing host-guest Z-scheme heterojunctions in constructing the paper-based PEC sensing platforms for environmental monitoring.

Highly Electroactive Co2+-Based Metal-Organic Frameworks as an Efficient Coreaction Accelerator for Amplifying Near-Infrared Electrochemiluminescence of Gold Nanoclusters in Biomarkers Immunoassay

Metal nanoclusters (NCs) as a new kind of luminophore have acquired sufficient interest, but their widespread application is restricted on account of their relatively low electrochemiluminescence (ECL) efficiency. Then, aqueous metal NCs with high ECL efficiency were strongly anticipated, especially for the ultrasensitive analysis of biomarkers. Herein, a near-infrared (NIR) ECL biosensing strategy for the test of neuron-specific enolase (NSE) was proposed by utilizing N-acetyl-l-cysteine (NAC)- and cysteamine (Cys)-stabilized gold NCs (NAC/Cys-AuNCs) as ECL emitters with the NIR ECL emission around 860 nm and a metal-organic framework/palladium nanocubes (ZIF-67/PdNCs) hybrid as the coreaction accelerator through their admirable electrocatalytic activity. The NIR emission would reduce photochemical injury to the samples and even realize nondestructive analysis with highly strong susceptibility and suitability. Furthermore, the utilization of ZIF-67/PdNCs could improve the ECL response of NAC/Cys-AuNCs by facilitating the oxidation of the coreactant triethylamine (TEA), leading to the production of a larger quantity of reducing intermediate radical TEA•+. Consequently, NAC/Cys-AuNCs with ZIF-67/PdNCs displayed 2.7 fold enhanced ECL emission compared with the single NAC/Cys-AuNCs using TEA as the coreactant. In addition, HWRGWVC (HWR), a heptapeptide, was introduced to immobilize antibodies for the specially binding Fc fragment of the antibodies, which improved the binding efficiency and sensitivity. As a result, a "signal-on" immunosensor for NSE analysis was obtained with an extensive linear range of 0.1 to 5 ng/mL and a low limit of detection (0.033 fg/mL) (S/N = 3). This study provides a wonderful method for the development of an efficient nondestructive immunoassay.

An intelligent Cu/ZIF-8-based nanodrug delivery system for tumor-specific and synergistic therapy via tumor microenvironment-responsive cascade reaction

An intelligent nanodrug delivery system (Cu/ZIF-8@GOx-DOX@HA, hereafter CZGDH) consisting of Cu-doped zeolite imidazolate framework-8 (Cu/ZIF-8, hereafter CZ), glucose oxidase (GOx), doxorubicin (DOX), and hyaluronic acid (HA) was established for targeted drug delivery and synergistic therapy of tumors. The CZGDH specifically entered tumor cells through the targeting effect of HA and exhibited acidity-triggered biodegradation for subsequent release of GOx, DOX, and Cu2+ in the tumor microenvironment (TME). The GOx oxidized the glucose (Glu) in tumor cells to produce H2O2 and gluconic acid for starvation therapy (ST). The DOX entered the intratumoral cell nucleus for chemotherapy (CT). The released Cu2+ consumed the overexpressed glutathione (GSH) in tumor cells to produce Cu+. The generated Cu+ and H2O2 triggered the Fenton-like reaction to generate toxic hydroxyl radicals (·OH), which disrupted the redox balance of tumor cells and effectively killed tumor cells for chemodynamic therapy (CDT). Therefore, synergistic multimodal tumor treatment via TME-activated cascade reaction was achieved. The nanodrug delivery system has a high drug loading rate (48.3 wt%), and the three-mode synergistic therapy has a strong killing effect on tumor cells (67.45%).

Simple fluorochromic detection of chromium with ascorbic acid functionalized luminescent Bio-MOF-1

The bioaccumulation of various heavy metals in the environment and agriculture is posing serious hazards to human health. Hexavalent chromium is one of the most encountered heavy metal pollutants. The routine monitoring of Cr(VI) via simple methods assumes great analytical significance in sectors like environmental safety, food quality, etc. This study reports a novel biocompatible and luminescent metal-organic framework (ascorbic acid functionalized Bio-MOF-1) based "Turn-on" nanoprobe for rapid and sensitive optical detection of Cr(VI). Bio-MOF-1 has been synthesized, functionalized with ascorbic acid (AA), and then comprehensively characterized for its key material properties. The presence of Cr(VI) results in the photoluminescence recovery of Bio-MOF-1/AA. Using the above approach, Cr(VI) is detected over a wide concentration range of 0.02 to 20 ng mL-1, with the limit of detection being 0.01 ng mL-1. The nanoprobe is capable of detecting Cr(VI) in real water as well as in some spiked food samples. Hence, the ascorbic acid functionalized Bio-MOF-1 nanoprobe is established as a potential on-field detection tool for Cr(VI).

Multilayer Ti3C2-CNTs-Au Loaded with Cyclodextrin-MOF for Enhanced Selective Detection of Rutin

In this work, multi-layer Ti3C2 - carbon nanotubes - gold nanoparticles (Ti3C2-CNTs-Au) and cyclodextrin metal-organic framework - carbon nanotubes (CD-MOF-CNTs) have been prepared by in situ growth method and used to construct the ultra-sensitive rutin electrochemical sensor for the first time. Among them, the large number of metal active sites of Ti3C2, the high electron transfer efficiency of CNTS, and the good catalytic properties of AuNPs significantly enhance the electrochemical properties of the composite carbon nanomaterials. Interestingly, CD-MOF has a unique host-guest recognition and a large number of cavities, molecular gaps, and surface reactive groups, which gives the composite outstanding accumulation properties and selectivity for rutin. Under the optimized conditions, the constructed novel sensor has satisfactory detection performance for rutin in the range of 2 × 10-9 to 8 × 10-7 M with a limit of detection of 6.5 × 10-10 M. In addition, the sensor exhibits amazing anti-interference performance against rutin in some flavonoid compounds and can be used to test natural plant samples (buckwheat, Cymbopogon distans, and flos sophorae immaturus). This work has promising applications in the field of environmental and food analysis, and exploring new directions for the application of Mxene-based composites.

Interface-regulated S-type core-shell PCN-224@TiO2 heterojunction for visible-light-driven generation of singlet oxygen for selective photooxidation of 2-chloroethyl ethyl sulfide

Selective oxidation of sulfur mustard gas (HD) to non-toxic sulfoxide by the visible-light-catalyzed generation of singlet oxygen (1O2) is a promising degradation strategy. Although PCN-224 can absorb visible light, it suffers from rapid electron-hole recombination and low redox capacity, which limits the performance of HD degradation. Titanium dioxide (TiO2) is an excellent photocatalyst but it lacks visible-light-activity in degrading HD. In this study, PCN-224@TiO2 heterojunction with S-type core-shell structure was synthesized by in-situ growth method to prolong the visible light absorption capacity of TiO2 and inhibit the rapid recombination of PCN-224. The interface formation and internal electric field were optimized by adjusting the Zr/Ti ratio to enhance the charge transfer, redox capacity, electron-hole separation, and visible light absorption. In this study, the formation of heterojunction composites based on Zr-O-Ti linkages is demonstrated by a series of characterization methods. It is demonstrated by experiments and theoretical calculations that PCN-224@TiO2 can generate nearly 100 % 1O2 under visible light conditions without a sacrificial agent, resulting in efficient and selective oxidation of 2-chloroethyl ethyl sulfide (CEES), a simulant of HD, to non-toxic sulfoxide form.

Enhanced Label-Free Photoelectrochemical Strategy for Pollutant Detection: Using Surface Oxygen Vacancies-Enriched BiVO4 Photoanode

Label-free photoelectrochemical sensors have the advantages of high sensitivity and a simple electrode structure. However, its performance is greatly limited due to the photoactive materials' weak photoactivity and poor stability. Herein, a robust homogeneous photoelectrochemical (PEC) aptasensor has been constructed for atrazine (ATZ) based on photoetching (PE) surface oxygen vacancies (Ov)-enriched Bismuth vanadate (BiVO4) (PE-BVO). The surface of the Ov improves the carrier separation ability of BiVO4, thus providing a superior signal substrate for the sensor. A thiol molecular layer self-assembled on PE-BVO acts as a blocker, while 2D graphene acts as a signal-on probe after release from the aptamer-graphene complex. The fabricated sensor has a wide linear detection range of 0.5 pM to 10.0 nM and a low detection limit of 0.34 pM (S/N = 3) for ATZ. In addition, it can efficiently work in a wide pH range (3-13) and high ionic strength (∼6 M Na+), which provides promising opportunities for detecting environmental pollutants under complex conditions.

Photoelectrochemical immunoassay of cardiac troponin I based on ZnTCPP/CdIn2S4 type-II heterojunction and co-catalyzed precipitation biolabeling

CdIn2S4 and zinc tetrakis(4-carboxyphenyl)porphyrin (ZnTCPP) were synthesized by hydrothermal method, and an organic dye-sensitized inorganic semiconductor ZnTCPP/CdIn2S4 type II heterojunction was constructed on a fluorine-doped tin oxide (FTO) substrate electrode. A sandwich immunostructure for signal-attenuation photoelectrochemical (PEC) detection of cardiac troponin I (cTnI) was constructed using the ZnTCPP/CdIn2S4/FTO photoanode and a horseradish peroxidase (HRP)-ZnFe2O4-Ab2-bovine serum albumin (BSA) immunolabeling complex. The bioenzyme HRP and the HRP-like nanozyme ZnFe2O4 can co-catalyze the oxidation of 4-chloro-1-naphthol (4-CN) by H2O2 to produce an insoluble precipitate on the photoanode, thus notably reducing the anodic photocurrent for quantitative determination of cTnI. Under the optimal conditions, the photocurrent at 0 V vs. SCE in 0.1 M phosphate buffer solution (pH 7.40) containing 0.1 M ascorbic acid was linear with the logarithm of cTnI concentration from 500 fg mL-1 to 50.0 ng mL-1, and the limit of detection (LOD, S/N = 3) is 0.15 pg mL-1. Spiked recoveries were 95.1% ~ 104% for assay of cTnI in human serum samples.

A sensitive immunosensing platform based on the high cathodic photoelectrochemical activity of Zr-MOF and dual-signal amplification of peroxidase-mimetic Fe-MOF

Cathodic photoelectrochemical (PEC) analysis has received special concerns because of its outstanding anti-interference capability toward reductive substances in samples, so it is highly desirable to develop high-performance photocathodic materials for PEC analysis. Herein, a Zr-based metal-organic framework (Zr-MOF), MOF-525, is explored as a photoactive material in aqueous solution for the first time, which shows a narrow band-gap of 1.82 eV, excellent visible-light absorption, and high cathodic PEC activity. A sandwiched-type PEC immunosensor for detecting prostate-specific antigen (PSA) is fabricated by using MIL-101-NH2(Fe) label and MOF-525 photoactive material. MIL-101-NH2(Fe) as a typical Fe-MOF can serve as a peroxidase mimic to catalyze the production of precipitates on the photoelectrode. Both the produced precipitates and the MIL-101-NH2(Fe) labels can quench the photocathodic current, enabling "signal-off" immunosensing of PSA. The detection limit is 3 fg mL-1, and the linear range is between 10 fg mL-1 and 100 ng mL-1 for detecting PSA. The present study not only develops a high-performance Zr-MOF photoactive material for cathodic PEC analysis but also constructs a sensitive PEC immunosensing platform based on the dual-signal amplification of peroxidase-mimetic Fe-MOF.

A signal-on photoelectrochemical aptasensor based on ferrocene labeled triple helix DNA molecular switch for detection of antibiotic amoxicillin

A sensitive signal-on photoelectrochemical aptasensor for antibiotic determination was constructed based on the energy level matching between ferrocene and CuInS2. P-type CuInS2 microflower was complexed with reduced graphene oxide (CuInS2/rGO) to get photocathode current with good photoelectric conversion efficiency and stability. Then, hairpin DNA (HP) was covalently bonded to the electrode surface. A triple helix DNA (THMS) was used as a molecular switch. After the specific recognition between target and THMS in homogeneous solution, ferrocene labeled probe (Fc-T2) was released. Finally, Fc-T2 was captured by the HP, which leaded the obvious increase of photocurrent for the energy level matching between ferrocene and CuInS2. The increase of the photocurrent signal was proportional to the concentration of target amoxicillin (AMOX), the linear range was 100 fM-100 nM with detection limit of 19.57 fM. Meanwhile, the method has been successfully applied for milk and lake water samples analysis with satisfactory results.

Multifunctional Supramolecular Hydrogel Modulated Heterojunction Interface Carrier Transport Engineering Facilitates Sensitive Photoelectrochemical Immunosensing

Highly responsive interface of semiconductor nanophotoelectrochemical materials provides a broad development prospect for the identification of low-abundance cancer marker molecules. This work innovatively proposes an efficient blank WO3/SnIn4S8 heterojunction interface formed by self-assembly on the working electrode for interface regulation and photoregulation. Different from the traditional biomolecular layered interface, a hydrogel layer containing manganese dioxide with a wide light absorption range is formed at the interface after an accurate response to external immune recognition. The formation of the hydrogel layer hinders the effective contact between the heterojunction interface and the electrolyte solution, and manganese dioxide in the hydrogel layer forms a strong competition between the light source and the substrate photoelectric material. The process effectively improves the carrier recombination efficiency at the interface, reduces the interface reaction kinetics and photoelectric conversion efficiency, and thus provides strong support for target identification. Taking advantage of the process, the resulting biosensors are being explored for sensitive detection of human epidermal growth factor receptor 2, with a limit of detection as low as 0.037 pg/mL. Also, this study contributes to the advancement of photoelectrochemical biosensing technology and opens up new avenues for the development of sensitive and accurate analytical tools in the field of bioanalysis.

A novel photoelectrochemical self-screening aptamer biosensor based on CAU-17-derived Bi2WO6/Bi2S3 for rapid detection of quorum sensing signal molecules

Quorum sensing signal molecule is an important biomarker released by some microorganisms, which can regulate the adhesion and aggregation of marine microorganisms on the surface of engineering facilities. Thus, it is significant to exploit a convenient method that can effectively monitor the formation and development of marine biofouling. In this work, an advanced photoelectrochemical (PEC) aptamer biosensing platform was established and firstly applied for the rapid and ultrasensitive determination of N-(3-Oxodecanoyl)-l-homoserine lactone (3-O-C10-HL) released from marine fouling microorganism Ponticoccus sp. PD-2. The visible-light-driven Bi2WO6/Bi2S3 heterojunction derived from metal-organic frameworks (MOFs) CAU-17 and self-screened aptamer were employed as the photoactive materials and bioidentification elements, respectively. Appropriate amount of MoS2 quantum dots (QDs) conjugated with single-stranded DNA were introduced by hybridization to enhance the photocurrent response of the PEC biosensor. The self-screening aptamer can specifically recognize 3-O-C10-HL, accompanied by increasing the steric hindrance and forcing MoS2 QDs to leave the electrode surface, resulting in an obvious reduction of photocurrent and achieving a dual-inhibition signal amplification effect. Under the optimized conditions, the photocurrent response of PEC aptasensor was linear with 3-O-C10-HL concentration from 1 nM to 10 μM, and the detection limit was as low as 0.26 nM. The detection strategy also showed a high reproducibility, superior specificity and good stability. This work not only provides a simple, rapid and ultrasensitive PEC aptamer biosensing strategy for monitoring quorum sensing signal molecules in marine biofouling, but also broadens the application of MOFs-based heterojunctions in PEC sensors.

A MoS2 nanosheet-based CRISPR/Cas12a biosensor for efficient miRNA quantification for acute myocardial infarction

Acute myocardial infarction (AMI) represents the leading cause of cardiovascular death worldwide, and it is thus pivotal to develop effective approaches for the timely detection of AMI markers, especially possessing the characteristics of antibody-free, signal amplification, and manipulation convenience. We herein construct a MoS2 nanosheet-powered CRISPR/Cas12a sensing strategy for sensitive determination of miR-499, a superior AMI biomarker to protein markers. The presence of miR-499 at a trace level is able to induce a significantly enhanced fluorescence signal in a DNA-based molecular engineering platform, which consists of CRISPR/Cas12a enzymatic reactions and MoS2 nanosheet-controllable signal reporting components. The MoS2 nanosheets were characterized by using atomic force microscopy (AFM) and transmission electron microscope (TEM). The detection feasibility was verified by using polyacrylamide gel electrophoresis (PAGE) analysis and fluorescence measurements. The detection limit is determined as 381.78 pM with the linear range from 0.1 ⅹ 10-9 to 13.33 ⅹ 10-9 M in a fast manner (about 30 min). Furthermore, miRNA detection in real human serum is also conducted with desirable recovery rates (89.5 %-97.6 %), which may find potential application for the clinic diagnosis. We describe herein the first example of MoS2 nanosheet-based signal amplified fluorescence sensor for effective detection of AMI-related miRNA.

Portable photoelectrochemical immunoassay with micro-electro-mechanical-system for alpha-fetoprotein in hepatocellular carcinoma

Early detection of cancer has a profound impact on patient survival and treatment outcomes considering high treatment success rates and reduced treatment complexity. Here, we developed a portable photoelectrochemical (PEC) immune platform for sensitive testing of alpha-fetoprotein (AFP) based on Pt nanocluster (Pt NCs) loaded defective-state g-C3N4 photon-electron transducers. The broad forbidden band structure of g-C3N4 was optimized by the nitrogen doping strategy and additional homogeneous porous structure was introduced to further enhance the photon utilization. In addition, the in-situ growth of Pt NCs provided efficient electron transfer catalytic sites for sacrificial agents, which were used to further improve the sensitivity of the sensor. Efficient photoelectric conversion under a hand-held flashlight was determined by the geometry of the transducer and the energy band design, and the portable design of the PEC sensor was realized. The developed sensing platform exhibited a wide linear response range (0.1-50 ng mL-1) and low limit of detection (0.043 ng mL-1) for AFP under optimum conditions. This work provides a new idea for designing portable PEC biosensing platforms to meet the current mainstream POC testing needs.

Immunoassays and Mass Spectrometry for Determination of Protein Concentrations in Genetically Modified Crops

Quantifying protein levels in genetically modified (GM) crops is crucial in every phase of development, deregulation, and seed production. Immunoassays, particularly enzyme-linked immunosorbent assay, have been the primary protein quantitation techniques for decades within the industry due to their efficiency, adaptability, and credibility. Newer immunoassay technologies like Meso Scale Discovery and Luminex offer enhanced sensitivity and multiplexing capabilities. While mass spectrometry (MS) has been widely used for small molecules and protein detection in the pharmaceutical and agricultural industries (e.g., biomarkers, endogenous allergens), its use in quantifying protein levels in GM crops has been limited. However, as trait portfolios for GM crop have expanded, MS has been increasingly adopted due to its comparable sensitivity, increased specificity, and multiplexing capabilities. This review contrasts the benefits and limitations of immunoassays and MS technologies for protein measurement in GM crops, considering factors such as cost, convenience, and specific analytical needs. Ultimately, both techniques are suitable for assessing protein concentrations in GM crops, with MS offering complementary capabilities to immunoassays. This comparison aims to provide insights into selecting between these techniques based on the user's end point needs.

Excited-State Intramolecular Proton Transfer-Driven Photon-Gating for Photoelectrochemical Sensing of CO-Releasing Molecule-3

Different from prevalent approaches such as immunological recognition, complementary base pairing, or enzymatic regulation in current photoelectrochemical (PEC) sensing, this study reported an excited-state intramolecular proton transfer (ESIPT)-driven photon-gating PEC sensor. The sensor is developed for the detection of CO-releasing molecule-3 (CORM-3) by modifying an ESIPT-switched organic fluorescent probe molecule (NDAA) onto the surface of a p-type semiconductor (BiOI). The NDAA can be excited and exhibit strong green fluorescence after responding with CORM-3, resulting in an electrode-interface photon competitive absorption effect due to the switch on ESIPT and considerably reducing the photocurrent signal. The experimental results revealed that the as-developed PEC sensor achieved good analytical performance with high selectivity and sensitivity, with a linear range of 0.01-1000 μM and a lower detection limit of 6.5 nM. This work demonstrates the great potential of the organic fluorescent probe molecule family in advancing PEC analysis. It is anticipated that our findings will stimulate the creation of diverse functional probes possessing distinctive characteristics for inventive PEC sensors.

Click Reaction-Mediated Fluorescent Immunosensor Based on Cu-MOF Nanoparticles for Ultrasensitive and High-Throughput Detection of Aflatoxin B1 in Food Samples

Due to the high toxicity of aflatoxin B1 and its risks to human health, we developed a click reaction-mediated automated fluorescent immunosensor (CAFI) for sensitive detection of aflatoxin B1 based on the Cu(I)-catalyzed click reaction. With its large specific surface area, a copper-based metal-organic framework (Cu-MOF) was synthesized to adsorb and enrich the copper ion (Cu(II)) and then load the complete antigen (BSA-AFB1). After the immunoreaction, Cu(II) inside the Cu-MOF-Antigen conjugate would be reduced to Cu(I) in the presence of sodium ascorbate, which triggered the click reaction between the fluorescent donor-modified DNA and the receptor-modified complementary DNA to lead to a fluorescence signal readout. The whole reaction steps were finished by the self-developed automated immunoreaction device. This CAFI method showed a limit of detection (LOD) of 0.48 pg/mL as well as a 670-fold enhancement in sensitivity compared to conventional ELISA, revealing its great potential in practical applications and automated detection.

UiOL@AIEgens-assisted lateral flow immunosensor for the ultrasensitive dual-modal point-of-care detection of aflatoxin B1

Aflatoxin B1 (AFB1) contamination in food has attracted worldwide attention. The sensitive detection of AFB1 is vital for ensuring food quality and safety. This study developed an ultrasensitive signal-enhanced lateral flow immunosensor (LFIS) based on the functionalized zirconium metal-organic framework (MOF) of a UiO linker enriched with abundant aggregation-induced emission luminogen (UiOL@AIEgens) probes for the rapid dual-modal point-of-care (POC) determination of AFB1. Using UiO MOFs with numerous active sites as the carrier facilitated abundant AIEgens enrichment on the surface. After coupling with enough anti-AFB1 monoclonal antibodies (mAbs), the green-emissive UiOL@AIEgens-mAbs probes with high specificity and remarkably-enhanced fluorescence responses were obtained to competitively capture target AFB1 in the standard or sample solution and AFB1 antigen immobilized on the test (T) line of the POC LFIS. Under optimum conditions, the LFIS was capable of visual qualitative and smartphone-assisted dual-modal determination of target AFB1 within 7 min. Detection occurred in a range of 0.01-5 ng/mL at an ultra-low detection limit of 0.003 ng/mL, which was 300- and 600-fold lower than traditional immunoassays and the maximum limit set by the European Union, respectively. Moreover, the feasibility and robustness of the LFIS platform were assessed by detecting AFB1 in maize and lotus seed samples with average recoveries of 94.3-109.0%. The developed UiOL@AIEgens-based POC LFIS can be used for ultrasensitive, reliable, on-site detection in food. This study provides a new method for the real-time monitoring of AFB1 and other harmful contaminants in food and more complex matrices.

Highly Light-Harvesting MOF-on-MOF Heterostructure: Cascading Functionality to Flexible Photogating of Organic Photoelectrochemical Transistor and Bienzyme Cascade Detection

Recently, organic photoelectrochemical transistor (OPECT) bioanalysis has become a prominent technique for the high-performance detection of biomolecules. However, as a sensitive index of the OPECT, the dynamic regulation transconductance (gm) is still severely deficient. Herein, this work reports a new photosensitive metal-organic framework (MOF-on-MOF) heterostructure for the effective modulation of maximum gm and natural bienzyme interfacing toward choline detection. Specifically, the bidentate ligand MOF (b-MOF) was assembled onto the UiO-66 MOF (u-MOF) by a modular assembly method, which could facilitate the charge separation and generate enhanced photocurrents and offer a biophilic environment for the immobilization of choline oxidase (ChOx) and horseradish peroxidase (HRP) through hydrogen-bonded bridges. The transconductance of the OPECT could be flexibly altered by increased light intensity to maximal value at zero gate bias, and sensitive choline detection was achieved with a detection limit of 0.2 μM. This work reveals the potential of MOF-on-MOF heterostructures for futuristic optobioelectronics.

Multi-modal nanoprobe-enabled biosensing platforms: a critical review

Nanomaterials show great potential for applications in biosensing due to their unique physical, chemical, and biological properties. However, the single-modal signal sensing mechanism greatly limits the development of single-modal nanoprobes and their related sensors. Multi-modal nanoprobes can realize the output of fluorescence, colorimetric, electrochemical, and magnetic signals through composite nanomaterials, which can effectively compensate for the defects of single-modal nanoprobes. Following the multi-modal nanoprobes, multi-modal biosensors break through the performance limitation of the current single-modal signal and realize multi-modal signal reading. Herein, the current status and classification of multi-modal nanoprobes are provided. Moreover, the multi-modal signal sensing mechanisms and the working principle of multi-modal biosensing platforms are discussed in detail. We also focus on the applications in pharmaceutical detection, food and environmental fields. Finally, we highlight this field's challenges and development prospects to create potential enlightenment.

Novel MoS2-decorated Cu2O hybrid nanoparticles for enhanced non-enzymatic electrochemical cholesterol detection

Precise identification of cholesterol levels is crucial for the early diagnosis of cardiovascular risk factors. This paper presents a novel approach for cholesterol detection that circumvents the reliance on enzymatic processes. Leveraging the unique properties of advanced materials and electrochemical principles, our non-enzymatic approach demonstrates enhanced sensitivity, specificity, and limit of detection in cholesterol analysis. A non-enzymatic electrochemical biosensor for Cholesterol, employing a nanohybrid comprising Cu2O nanoparticles decorated with MoS2, is presented. The cyclic voltammetry (CV), differential pulse voltammetry (DPV), and amperometry techniques were employed to investigate the electrochemical behaviour of the glassy carbon electrode modified with the Cu2O/MoS2nanohybrid. The modified electrode exhibited an excellent sensitivity of 111.74μAμM-1cm-2through the CV method and showcased a low detection limit of 2.18μM and an expansive linear range spanning 0.1-180μM when employing the DPV method. The electrode also showed good selectivity to various interfering components in 0.1 M NaOH and a satisfied stability of about 15 days at room temperature. The study demonstrates the potential for broader applications in clinical diagnostics and monitoring cardiovascular health, paving the way for a paradigm shift in cholesterol detection methodologies and offering a more efficient and cost-effective alternative to traditional enzymatic assays.

Z-Scheme Heterojunction Excited by DNA-Programmed Upconversion Nanotransducers for a Near-Infrared Light-Actuated Lab-on-Paper Device

Herein, a flexible near-infrared (NIR) light-actuated photoelectrochemical (PEC) lab-on-paper device was constructed toward miRNA-122 detection, utilizing the combination of DNA-programmed NaYF4/Yb,Tm upconversion nanoparticles (UCNPs) and the Z-scheme AgI/WO3 heterojunction grown in situ on gold nanoparticle-decorated 3D cellulose fibers. The UCNPs were employed as light transducers for converting NIR light into ultraviolet/visible (UV/vis) light to excite the nanojunction. The multiple diffraction of NaYF4/Yb,Tm matched the absorption band of the Z-scheme AgI/WO3 heterojunction, resulting in enhanced PEC photocurrent output. This prepared Z-scheme heterojunction effectively directed charge migration and highly facilitated the electron-hole pair separation. Target miRNA-122 activated the nonenzyme catalytic hairpin assembly signal amplification strategy, generating duplexes which caused the exfoliation of NaYF4/Yb,Tm UCNPs from the biosensor electrode and lowered the photocurrent under 980 nm irradiation. Under optimized circumstances, the proposed NIR-actuated PEC lab-on-paper device presented accurate miRNA-122 detection within a wide linear range of 10 fM-100 nM with a low limit of detection of 2.32 fM, providing a reliable strategy in the exploration of NIR-actuated PEC biosensors for low-cost, high-performance bioassay in clinical applications.