Polymeric Nanostructures for Imaging and Therapy

Targeted pH-responsive delivery of rosmarinic acid via phenylboronic acid functionalized mesoporous silica nanoparticles for liver and lung cancer therapy

Currently, chemotherapy is one of the most practiced approaches for the treatment of cancers. However, existing chemotherapeutic drugs have poor aqueous solubility, poor selectivity, higher systematic toxicity, and poor target accumulation. In this study, we designed and synthesized a boronic acid/ester-based pH-responsive nano-valve that specifically targets the microenvironment in cancer cells. The nano-valve comprises phenylboronic acid-coated mesoporous silica nanoparticles (B-MSN) loaded with polyphenolic compound Rosmarinic acid (ROS-B-MSN). The nano-valve was further coated with lignin (LIG) to achieve our desired LIG-ROS-BMSN nano-valve for targeted chemotherapy against Hep-G2 and NCI-H460 cell lines. The structure and properties of NPs were characterized by Fourier-transformed infrared spectroscopy (FTIR), Scanning Electron Microscopy (SEM) in combination with EDX, and Dynamic light scattering (DLS). The outcomes revealed that the designed LIG-ROS-BMSN were in the nanorange (144.1 ± 0.70 nm), had negative Zeta potential (-15.7 ± 0.46 mV) and had a nearly spherical morphology. In vitro, drug release investigations showed a controlled pH-dependent release profile under mild acidic conditions that could enhance the targeted chemotherapeutic response against cancer in mild acidic environments. The obtained LIG-ROS-BMSN nano valve achieved significantly lower IC50 values of (1.70 ± 0.01 μg/mL and 3.25 ± 0.14 μg/mL) against Hep-G2 and NCI-H460 cell lines as compared to ROS alone, which was (14.0 ± 0.7 μg/mL and 29.10 ± 0.25 μg/mL), respectively. The cellular morphology before and after treatment was further confirmed via inverted microscopy. The outcomes of the current study imply that our designed LIG-ROS-BMSN nanovalve is a potential carrier for cancer chemotherapeutics.

Mesogenic Ordering-Driven Self-Assembly of Liquid Crystalline Block Copolymers in Solution

With the development of nanotechnology, the preparation of polymeric nanoparticles with nicely defined structures has been well-developed, and the functionalization and subsequent applications of the resultant nanostructures are becoming increasingly important. Particularly, by introducing mesogenic ordering as the driving force for the solution-state self-assembly of liquid crystalline (LC) block copolymers (BCPs), micellar nanostructures with different morphologies, especially anisotropic morphologies, can be easily prepared. This review summarizes the recent progress in the solution-state self-assembly of LC BCPs and is mostly focused on four main related aspects, including an in-depth understanding of the mesogenic ordering-driven self-assembly, precise assembly methods, utilization of these methods to fabricate hierarchical structures, and the potential applications of these well-defined nanostructures. We hope not only to make a systematic summary of previous studies but also to provide some useful thinking for the future development of this field.

Polymeric Nanoparticles for Drug Delivery

The recent emergence of nanomedicine has revolutionized the therapeutic landscape and necessitated the creation of more sophisticated drug delivery systems. Polymeric nanoparticles sit at the forefront of numerous promising drug delivery designs, due to their unmatched control over physiochemical properties such as size, shape, architecture, charge, and surface functionality. Furthermore, polymeric nanoparticles have the ability to navigate various biological barriers to precisely target specific sites within the body, encapsulate a diverse range of therapeutic cargo and efficiently release this cargo in response to internal and external stimuli. However, despite these remarkable advantages, the presence of polymeric nanoparticles in wider clinical application is minimal. This review will provide a comprehensive understanding of polymeric nanoparticles as drug delivery vehicles. The biological barriers affecting drug delivery will be outlined first, followed by a comprehensive description of the various nanoparticle designs and preparation methods, beginning with the polymers on which they are based. The review will meticulously explore the current performance of polymeric nanoparticles against a myriad of diseases including cancer, viral and bacterial infections, before finally evaluating the advantages and crucial challenges that will determine their wider clinical potential in the decades to come.

Rescuing a Troubled Tolcapone with PEGylated PLGA Nanoparticles: Design, Characterization, and Hepatotoxicity Evaluation

Tolcapone is an orally active catechol-O-methyltransferase (COMT) inhibitor used as adjuvant therapy in Parkinson's disease. However, it has a highly hepatotoxic profile, as recognized by the U.S. Food and Drug Administration. As a possible solution, nanoscience brought us several tools in the development of new functional nanomaterials with tunable physicochemical properties, which can be part of a solution to solve several drawbacks, including drug's short half-life and toxicity. This work aims to use PEGylated poly(lactic-co-glycolic acid) (PLGA) nanoparticles as a stable carrier with lower hydrodynamic size and polydispersity to encapsulate tolcapone in order to overcome its therapeutic drawbacks. Using the nanoprecipitation method, tolcapone-loaded nanoparticles with a DLC% of 5.7% were obtained (EE% of 47.0%) and subjected to a lyophilization optimization process to obtain a final shelf-stable formulation. Six different cryoprotectants in concentrations up to 10% (w/v) were tested. A formulation of PLGA nanoparticles with 3% hydroxypropyl-β-cyclodextrin (HPβCD) as a cryoprotectant (PLGA-HP@Tolc), presenting sub-200 nm sizes and low polydispersity (PdI < 0.200) was selected. Cytotoxicity assays, namely, MTT and SRB, were used to study the metabolic activity and cell density of tolcapone and PLGA-HP@Tolc-treated cells. In both assays, a hepatocarcinoma cell line (HepG2) growing in glucose or glucose-free media (galactose-supplemented medium) was used. The results demonstrated that the treatment with the PLGA-HP@Tolc formulation led to a decrease in cytotoxicity in comparison to free tolcapone-treated cells in both media tested. Moreover, the elected formulation also counteracted ATP-depletion and excessive ROS production induced by tolcapone. The results suggest that HPβCD might have a dual function in the formulation: cryoprotectant and anticytotoxic agent, protecting cells from tolcapone-induced damage. Using an in vitro COMT inhibition assay, the PLGA-HP@Tolc formulation demonstrated to inhibit COMT as efficiently as free tolcapone. Overall, the results suggest that tolcapone-loaded PLGA NPs could be an interesting alternative to free tolcapone, demonstrating the same in vitro efficacy in inhibiting COMT but with a safer cytotoxic profile.

Polymer Dots with Delayed Fluorescence and Tunable Cellular Uptake for Photodynamic Therapy and Time-Gated Imaging

By combining bioimaging and photodynamic therapy (PDT), it is possible to treat cancer through a theranostic approach with targeted action for minimum invasiveness and side effects. Thermally activated delayed fluorescence (TADF) probes have gained recent interest in theranostics due to their ability to generate singlet oxygen (1O2) while providing delayed emission that can be used in time-gated imaging. However, it is still challenging to design systems that simultaneously show (1) high contrast for imaging, (2) low dark toxicity but high phototoxicity and (3) tunable biological uptake. Here, we circumvent shortcomings of TADF systems by designing block copolymers and their corresponding semiconducting polymer dots (Pdots) that encapsulate a TADF dye in the core and expose an additional boron-dipyrromethene (BODIPY) oxygen sensitizer in the corona. This architecture provides orange-red luminescent particles (ΦPL up to 18 %) that can efficiently promote PDT (1O2 QY=42 %) of HeLa cells with very low photosensitizer loading (IC50 ~0.05-0.13 μg/mL after 30 min). Additionally, we design Pdots with tunable cellular uptake but similar PDT efficiencies using either polyethylene glycol or guanidinium-based coronas. Finally, we demonstrate that these Pdots can be used for time-gated imaging to effectively filter out background fluorescence from biological samples and improve image contrast.

Biomedical applications, perspectives and tag design concepts in the cell - silent Raman window

Spectroscopic studies increasingly employ Raman tags exhibiting a signal in the cell - silent region of the Raman spectrum (1800-2800 cm-1), where bands arising from biological molecules are inherently absent. Raman tags bearing functional groups which contain a triple bond, such as alkyne and nitrile or a carbon-deuterium bond, have a distinct vibrational frequency in this region. Due to the lack of spectral background and cell-associated bands in the specific area, the implementation of those tags can help overcome the inherently poor signal-to-noise ratio and presence of overlapping Raman bands in measurements of biological samples. The cell - silent Raman tags allow for bioorthogonal imaging of biomolecules with improved chemical contrast and they have found application in analyte detection and monitoring, biomarker profiling and live cell imaging. This review focuses on the potential of the cell - silent Raman region, reporting on the tags employed for biomedical applications using variants of Raman spectroscopy.

Phospholipid-inspired alkoxylation induces crystallization and cellular uptake of luminescent COF nanocarriers

The porous nature and structural variability of covalent organic frameworks (COFs) make them preferred for drug loading and delivery applications. However, most COF materials suffer from poor luminescent properties and inefficiency for cell uptake. Herein, we experimentally demonstrate the crucial role of long alkoxy chains in the synthesis of crystalline COF nanostructures with high cellular uptake efficiency. After luminescence integration through band engineering, the semiconducting COF exhibits an optical bandgap of 2.05 eV, an emission wavelength of 632 nm, a high quantum yield of 37 %, and excellent fluorescence stability (100 % at 3 h). Such excellent optical properties of the designed COF nanocarriers enable quantitative evaluations of cellular uptake and visual tracking of drug delivery. It was demonstrated that the cellular uptake efficiency was enhanced by orders of magnitude for the COF after the introduction of long n-octyloxy chains, which firstly delivered the anticancer camptothecin (CPT) to cell lysosomes, and then underwent "endo/lysosomal escape" to induce cell apoptosis. In vivo assay evidenced a significant enhancement in the therapeutic effect with a 96 % inhibition of tumor growth after 14 days of treatment. This progress sheds light on designing cutting-edge drug delivery nanosystems based on COF materials with integrated diagnostic and therapeutic functions.

Drug-initiated poly(thiocitc acid) polymer incorporating host-guest interaction for cancer combination chemotherapy

Combination chemotherapy has shown considerable promise for cancer therapy. However, the hydrophobicity of chemotherapeutic agents and the difficulties of precise drug co-administration severely hinder the development of combination chemotherapy. Herein, we develop a polymeric drug delivery system (D-PTA-CD) to provide robust loading capacity, glutathione-responsive drug release, and precise combination therapy. The vehicle is prepared based on poly(thioctic acid) (PTA) polymers using DM1, a chemotherapeutic agent, as the initiator to endow the vehicle with cancer-inhibiting activity. β-cyclodextrins are incorporated into the side chains to enhance drug loading capacity via host-guest interactions. Attributing to the sufficient disulfide bond on the backbone, D-PTA-CD exhibits accelerated drug release triggered by elevated glutathione levels. Doxorubicin (DOX) and camptothecin (CPT) are encapsulated by D-PTA-CD to afford the combination chemotherapy nanoparticles (NP), DOX-NP, and CPT-NP, respectively, which exhibit significant synergetic anti-cancer effects, highlighting the enormous potential of D-PTA-CD as a versatile drug delivery platform for cancer combination chemotherapy.

Engineering innovations in medicine and biology: Revolutionizing patient care through mechanical solutions

The overlap between mechanical engineering and medicine is expanding more and more over the years. Engineers are now using their expertise to design and create functional biomaterials and are continually collaborating with physicians to improve patient health. In this review, we explore the state of scientific knowledge in the areas of biomaterials, biomechanics, nanomechanics, and computational fluid dynamics (CFD) in relation to the pharmaceutical and medical industry. Focusing on current research and breakthroughs, we provide an overview of how these fields are being used to create new technologies for medical treatments of human patients. Barriers and constraints in these fields, as well as ways to overcome them, are also described in this review. Finally, the potential for future advances in biomaterials to fundamentally change the current approach to medicine and biology is also discussed.

Near-Infrared-Responsive Rare Earth Nanoparticles for Optical Imaging and Wireless Phototherapy

Near-infrared (NIR) light is well-suited for the optical imaging and wireless phototherapy of malignant diseases because of its deep tissue penetration, low autofluorescence, weak tissue scattering, and non-invasiveness. Rare earth nanoparticles (RENPs) are promising NIR-responsive materials, owing to their excellent physical and chemical properties. The 4f electron subshell of lanthanides, the main group of rare earth elements, has rich energy-level structures. This facilitates broad-spectrum light-to-light conversion and the conversion of light to other forms of energy, such as thermal and chemical energies. In addition, the abundant loadable and modifiable sites on the surface offer favorable conditions for the functional expansion of RENPs. In this review, the authors systematically discuss the main processes and mechanisms underlying the response of RENPs to NIR light and summarize recent advances in their applications in optical imaging, photothermal therapy, photodynamic therapy, photoimmunotherapy, optogenetics, and light-responsive drug release. Finally, the challenges and opportunities for the application of RENPs in optical imaging and wireless phototherapy under NIR activation are considered.

In vitro and in vivo studies of Syzygium cumini-loaded electrospun PLGA/PMMA/collagen nanofibers for accelerating topical wound healing

This work aims to develop plant extract-loaded electrospun nanofiber as an effective wound dressing scaffolds for topical wound healing. Electrospun nanofibers were fabricated from Syzygium cumini leaf extract (SCLE), poly(lactic-co-glycolic acid) (PLGA), poly(methyl methacrylate) (PMMA), collagen and glycine. Electrospinning conditions were optimized to allow the formation of nanosized and uniform fibers that display smooth surface. Morphology and swelling behavior of the formed nanofibers were studied. In addition, the antibacterial activity of the nanofibers against multidrug-resistant and human pathogens was assessed by agar-well diffusion. Results showed that nanofibers containing Syzygium cumini extract at concentrations of 0.5 and 1% w/v exhibited greater antibacterial activity against the tested Gram-positive (i.e., Staphylococcus aureus, Candida albicans, Candida glabrata and Bacillus cereus) and Gram-negative (i.e., Salmonella paratyphi and Escherichia coli) pathogens compared to the same concentrations of the plain extract. Furthermore, in vivo wound healing was evaluated in Wistar rats over a period of 14 days. In vivo results demonstrated that nanofiber mats containing SCLE and collagen significantly improved wound healing within two weeks, compared to the control untreated group. These findings highlight the potential of fabricated nanofibers in accelerating wound healing and management of topical acute wounds.

Nanoparticles and Their Antibacterial Application in Endodontics

Root canal treatment represents a significant challenge as current cleaning and disinfection methodologies fail to remove persistent bacterial biofilms within the intricate anatomical structures. Recently, the field of nanotechnology has emerged as a promising frontier with numerous biomedical applications. Among the most notable contributions of nanotechnology are nanoparticles, which possess antimicrobial, antifungal, and antiviral properties. Nanoparticles cause the destructuring of bacterial walls, increasing the permeability of the cell membrane, stimulating the generation of reactive oxygen species, and interrupting the replication of deoxyribonucleic acid through the controlled release of ions. Thus, they could revolutionize endodontics, obtaining superior results and guaranteeing a promising short- and long-term prognosis. Therefore, chitosan, silver, graphene, poly(lactic) co-glycolic acid, bioactive glass, mesoporous calcium silicate, hydroxyapatite, zirconia, glucose oxidase magnetic, copper, and zinc oxide nanoparticles in endodontic therapy have been investigated in the present review. The diversified antimicrobial mechanisms of action, the numerous applications, and the high degree of clinical safety could encourage the scientific community to adopt nanoparticles as potential drugs for the treatment of endodontic diseases, overcoming the limitations related to antibiotic resistance and eradication of the biofilm.

Advances of nanomedicine in treatment of atherosclerosis and thrombosis

Atherosclerosis (AS) is a chronic inflammatory vascular disease. Myocardial ischemia originated from AS is the main cause of cardiovascular diseases, one of the major factors contributing to the global disease burden. AS is typically quiescent until occurrence of plaque rupture and thrombosis, leading to acute coronary syndrome and sudden death. Currently, clinical diagnostic techniques suffer from major pitfalls including lack of accuracy and specificity, which makes it rather difficult for drugs to directly target plaques to achieve therapeutic effect. Therefore, how to accurately diagnose and effectively intervene vulnerable AS plaques to achieve accurate delivery of drugs has become an urgent and evolving clinical problem. With the rapid development of nanomedicine and nanomaterials, nanotechnology has shown unique advantages in monitoring vulnerable plaques and thrombus and improving drug efficacy. Recent studies have shown that application of nanoparticle drug delivery system can booster the safety and effectiveness of drug therapy, and molecular imaging technology and nanomedicine also exhibit high clinical application potentials in disease diagnosis. Therefore, nanotechnology provides another promising avenue for diagnosis and treatment of AS and thrombosis, and has shown excellent performance in the development of targeted drug therapy and biomaterials. In this review, the research progress, challenges and prospects of nanotechnology in AS and thrombosis are discussed, expecting to provide new ideas for the prevention, diagnosis and treatment of AS and thrombosis.

Current Advances in Nanotheranostics for Molecular Imaging and Therapy of Cardiovascular Disorders

Cardiovascular diseases (CVDs) refer to a collection of conditions characterized by abnormalities in the cardiovascular system. They are a global problem and one of the leading causes of mortality and disability. Nanotheranostics implies to the combination of diagnostic and therapeutic capabilities inside a single nanoscale platform that has allowed for significant advancement in cardiovascular diagnosis and therapy. These advancements are being developed to improve imaging capabilities, introduce personalized therapies, and boost cardiovascular disease patient treatment outcomes. Significant progress has been achieved in the integration of imaging and therapeutic capabilities within nanocarriers. In the case of cardiovascular disease, nanoparticles provide targeted delivery of therapeutics, genetic material, photothermal, and imaging agents. Directing and monitoring the movement of these therapeutic nanoparticles may be done with pinpoint accuracy by using imaging modalities such as cardiovascular magnetic resonance (CMR), computed tomography (CT), positron emission tomography (PET), photoacoustic/ultrasound, and fluorescence imaging. Recently, there has been an increasing demand of noninvasive for multimodal nanotheranostic platforms. In these platforms, various imaging technologies such as optical and magnetic resonance are integrated into a single nanoparticle. This platform helps in acquiring more accurate descriptions of cardiovascular diseases and provides clues for accurate diagnosis. Advances in surface functionalization methods have strengthened the potential application of nanotheranostics in cardiovascular diagnosis and therapy. In this Review, we have covered the potential impact of nanomedicine on CVDs. Additionally, we have discussed the recently developed various nanoparticles for CVDs imaging. Moreover, advancements in the CMR, CT, PET, ultrasound, and photoacoustic imaging for the CVDs have been discussed. We have limited our discussion to nanomaterials based clinical trials for CVDs and their patents.

Adamantoid Scaffolds for Multiple Cargo Loading and Cellular Delivery as β-Cyclodextrin Inclusion Complexes

There is huge demand for developing guests that bind β-CD and can conjugate multiple cargos for cellular delivery. We synthesized trioxaadamantane derivatives, which can conjugate up to three cargos per guest. 1 H NMR titration and isothermal titration calorimetry revealed these guests form 1 : 1 inclusion complexes with β-CD with association constants in the order of 103  M-1 . Co-crystallization of β-CD with guests yielded crystals of their 1 : 1 inclusion complexes as determined by single-crystal X-ray diffraction. In all cases, trioxaadamantane core is buried within the hydrophobic cavity of β-CD and three hydroxyl groups are exposed outside. We established biocompatibility using representative candidate G4 and its inclusion complex with β-CD (β-CD⊂G4), by MTT assay using HeLa cells. We incubated HeLa cells with rhodamine-conjugated G4 and established cellular cargo delivery using confocal laser scanning microscopy (CLSM) and fluorescence-activated cell sorting (FACS) analysis. For functional assay, we incubated HeLa cells with β-CD-inclusion complexes of G4-derived prodrugs G6 and G7, containing one and three units of the antitumor drug (S)-(+)-camptothecin, respectively. Cells incubated with β-CD⊂G7 displayed the highest internalization and uniform distribution of camptothecin. β-CD⊂G7 showed higher cytotoxicity than G7, camptothecin, G6 and β-CD⊂G6, affirming the efficiency of adamantoid derivatives in high-density loading and cargo delivery.

Self-Amplified Cascade Degradation and Oxidative Stress Via Rational pH Regulation of Oxidation-Responsive Poly(ferrocene) Aggregates

Precise activation of polymer nanoparticles at lesion sites is crucial to achieve favorable therapeutic efficacy. However, conventional endogenous stimuli-responsive polymer nanoparticles probably suffer from few triggers to stimulate the polymer degradation and subsequent functions. Here, we describe oxidation-responsive poly(ferrocene) amphiphiles containing phenylboronic acid ester and ferrocene as the repeating backbone units. Upon triggering by hydrogen peroxide inside the tumor cells, the phenylboronic acid ester bonds are broken and poly(ferrocene) units are degraded to afford free ferrocene and noticeable hydroxide ions. The released hydroxide ions can immediately improve the pH value within the poly(ferrocene) aggregates, and the degradation rate of the phenylboronic acid ester backbone is further promoted by the upregulated pH; thereupon, the accelerated degradation can release much more additional hydroxide ions to improve the pH, thus achieving a positive self-amplified cascade degradation of poly(ferrocene) aggregates accompanied by oxidative stress boosting and efficient cargo release. Specifically, the poly(ferrocene) aggregates can be degraded up to ∼90% within 12 h when triggered by H2O2, while ferrocene-free control nanoparticles are degraded by only 30% within 12 days. In addition, the maleimide moieties tethered in the hydrophilic corona can capture blood albumin to form an albumin-rich protein corona and significantly improve favorable tumor accumulation. The current oxidation-responsive poly(ferrocene) amphiphiles can efficiently inhibit tumors in vitro and in vivo. This work provides a proof-of-concept paradigm for self-amplified polymer degradation and concurrent oxidative stress, which is promising in actively regulated precision medicine.

Trends in the Synthesis of Polymer Nano- and Microscale Materials for Bio-Related Applications

Polymeric nano- and microscale materials bear significant potential in manifold applications related to biomedicine. This is owed not only to the large chemical diversity of the constituent polymers, but also to the various morphologies these materials can achieve, ranging from simple particles to intricate self-assembled structures. Modern synthetic polymer chemistry permits the tuning of many physicochemical parameters affecting the behavior of polymeric nano- and microscale materials in the biological context. In this Perspective, an overview of the synthetic principles underlying the modern preparation of these materials is provided, aiming to demonstrate how advances in and ingenious implementations of polymer chemistry fuel a range of applications, both present and prospective.

Recent advances in permeable polymersomes: fabrication, responsiveness, and applications

Polymersomes are vesicular nanostructures enclosed by a bilayer-membrane self-assembled from amphiphilic block copolymers, which exhibit higher stability compared with their biological analogues (e.g. liposomes). Due to their versatility, polymersomes have found various applications in different research fields such as drug delivery, nanomedicine, biological nanoreactors, and artificial cells. However, polymersomes prepared with high molecular weight components typically display low permeability to molecules and ions. It hence remains a major challenge to balance the opposing features of robustness and permeability of polymersomes. In this review, we focus on the design and strategies for fabricating permeable polymersomes, including polymersomes with intrinsic permeability, the formation of nanopores in the membrane bilayers by protein insertion, and the construction of stimuli-responsive polymersomes. Then, we highlight the applications of permeable polymersomes in the fields of biomimetic nanoreactors, artificial cells and organelles, and nanomedicine, to underline the challenges in the development of polymersomes as soft matter with biomedical utilities.

Redox-responsive drug-inhibitor conjugate encapsulated in DSPE-PEG2k micelles for overcoming multidrug resistance to chemotherapy

Multidrug resistance (MDR) is a major cause of chemotherapy failure in cancer treatment. P-glycoprotein (P-gp) inhibitors are helpful for chemotherapy drugs to overcome tumor MDR effectively. With the traditional physical mixing of chemotherapy drugs and inhibitors, it is difficult to achieve satisfactory results due to the different pharmacokinetics and physicochemical properties between the two of them. Herein, we prepared a novel drug-inhibitor conjugate prodrug (PTX-ss-Zos) from a cytotoxin (PTX) and a third-generation P-gp inhibitor (Zos) linked with a redox-responsive disulfide. Then, PTX-ss-Zos was encapsulated in DSPE-PEG_2k micelles to form stable and uniform nanoparticles (PTX-ss-Zos@DSPE-PEG_2k NPs). PTX-ss-Zos@DSPE-PEG_2k NPs could be cleaved by the high-concentration GSH in cancer cells and release PTX and Zos simultaneously to inhibit MDR tumor growth synergistically without apparent systemic toxicity. The in vivo evaluation experiments exhibited that the tumor inhibition rates (TIR) of PTX-ss-Zos@DSPE-PEG_2k NPs were high up to 66.5% for HeLa/PTX tumor-bearing mice. This smart nanoplatform would bring new hope for cancer treatment in clinical trials.

Design, Synthesis, and Biomedical Application of Multifunctional Fluorescent Polymer Nanomaterials

Luminescent polymer nanomaterials not only have the characteristics of various types of luminescent functional materials and a wide range of applications, but also have the characteristics of good biocompatibility and easy functionalization of polymer nanomaterials. They are widely used in biomedical fields such as bioimaging, biosensing, and drug delivery. Designing and constructing new controllable synthesis methods for multifunctional fluorescent polymer nanomaterials with good water solubility and excellent biocompatibility is of great significance. Exploring efficient functionalization methods for luminescent materials is still one of the core issues in the design and development of new fluorescent materials. With this in mind, this review first introduces the structures, properties, and synthetic methods regarding fluorescent polymeric nanomaterials. Then, the functionalization strategies of fluorescent polymer nanomaterials are summarized. In addition, the research progress of multifunctional fluorescent polymer nanomaterials for bioimaging is also discussed. Finally, the synthesis, development, and application fields of fluorescent polymeric nanomaterials, as well as the challenges and opportunities of structure-property correlations, are comprehensively summarized and the corresponding perspectives are well illustrated.

Some Nanocarrier's Properties and Chemical Interaction Mechanisms with Flavones

Flavones such as 7,8-dihydroxyflavone (tropoflavin), 5,6,7-trihydroxyflavone (baicalein), 3',4',5,6-tetrahydroxyflavone (luteolin), 3,3',4',5,5',7-hexahydroxyflavone (myricetin), 4',5,7-trihydroxyflavone (apigenin), and 5,7-dihydroxyflavone (chrysin) are important both for their presence in natural products and for their pharmacological applications. However, due to their chemical characteristics and their metabolic processes, they have low solubility and low bioavailability. Knowledge about the physicochemical properties of nanocarriers and the possible mechanisms of covalent and non-covalent interaction between nanoparticles (NPs) and drugs is essential for the design of nanocarriers to improve the bioavailability of molecules with pharmacological potential, such as tropoflavin, baicalein, luteolin, myricetin, apigenin, and chrysin. The parameters of characterization of some NPs of these flavones, such as size, polydispersity index (PDI), zeta potential, encapsulation efficiency (EE), and % release/time, utilized in biomedical applications and the covalent and non-covalent interactions existing between the polymeric NPs and the drug were analyzed. Similarly, the presence of functional groups in the functionalized carbon nanotubes (CNTs), as well as the effect of pH on the % adsorption of flavonoids on functionalized multi-walled carbon nanotubes (MWCNT-COOH), were analyzed. Non-covalent interaction mechanisms between polymeric NPs and flavones, and covalent interaction mechanisms that could exist between the NPs and the amino and hydroxyl functional groups, are proposed.

Synthesis and characterization of Gd3+-loaded hyaluronic acid-polydopamine nanoparticles as a dual contrast agent for CT and MRI scans

Magnetic resonance imaging and computed tomography (CT) suffer from low contrast sensitivity and potential toxicity of contrast agents. To overcome these limitations, we developed and tested a new class of dual contrast agents based on polydopamine nanoparticles (PDA-NPs) that are functionalized and targeted with hyaluronic acid (HA). These nanoparticles (NPs) are chelated with Gd³⁺ to provide suitable contrast. The targeted NPs were characterized through ultraviolet-visible spectroscopy (UV-vis), scanning electron microscopy (SEM), infrared Fourier transform (FTIR), and dynamic light scattering (DLS). The cytotoxicity was investigated on HEK293 cells using an MTT assay. The contrast property of synthesized Gd³⁺/PDA/HA was compared with Barium sulfate and Dotarem, as commercial contrast agents (CAs) for CT and MRI, respectively. The results illustrated that synthesized PDA-NPs have a spherical morphology and an average diameter of 72 nm. A distinct absorption peak around 280 nm in the UV-vis spectrum reported the self-polymerization of PDA-NPs. The HA coating on PDA-NPs was revealed through a shift in the FTIR peak of C=O from 1618 cm^-1 to 1635 cm^-1. The Gd³⁺ adsorption on PDA/HA-NPs was confirmed using an adsorption isotherm assay. The developed CA showed low in vitro toxicity (up to 158.98 µM), and created a similar contrast in MRI and CT when compared to the commercial agents. The r₁ value for PDA/HA/Gd³⁺ (6.5 (mg/ml)^-1 s^-1) was more than Dotarem (5.6 (mg/ml)^-1 s^-1) and the results of the hemolysis test showed that at concentrations of 2, 4, 6, and 10 mg/ml, the hemolysis rate of red blood cells is very low. Additionally, the results demonstrated that PDA/HA/Gd³⁺ could better target the CD₄₄⁺-expressing cancer cells than PDA/Gd³⁺. Thus, it can be concluded that lower doses of developed CA are needed to achieve similar contrast of Dotarem, and the developed CA has no safety concerns in terms of hemolysis. The stability of PDA/HA/Gd³⁺ has also been evaluated by ICP-OES, zeta potential, and DLS during 3 days, and the results suggested that Gd-HA NPs were stable.

Supramolecular Theranostic Nanomedicine for In Situ Self-Boosting Cancer Photochemotherapy

Although traditional nanomedicines have enhanced the therapeutic efficacy and improved the survival quality of cancer patients, random drug release and drug resistance are deep-rooted problems hindering their clinical application. A precise nanoplatform combing chemotherapy and photodynamic therapy (PDT) is developing as a new therapeutic strategy to overcome the above challenges. Herein, a novel supramolecular nanomedicine is ingeniously constructed for in situ self-boosting cancer photochemotherapy. Hydrophilic polyethylene glycol (PEG) chains or β-cyclodextrin (β-CD) hosts are first conjugated onto tetraphenyl porphyrin (TCPP) to improve the solubility of TCPP and decrease their π-π stacking interactions, guaranteeing a high-efficiency PDT. Then, two camptothecin (CPT) molecules are linked together via a reactive oxygen species (ROS)-responsive thioketal bond, which averts the premature burst release of CPT and realizes in situ drug release at the tumor site where PDT is performed, resulting in an enhanced chemotherapy. Benefiting from the collaboration of host-guest complexation between β-CD and CPT, multiple intermolecular hydrogen bonds of β-CD, π-π stacking interactions among CPT and TCPP as well as PEG shell protection, a prolonged blood circulation time, and a selective tumor accumulation are acquired, which facilitate the synergistic photochemotherapy and bring a pre-eminent antitumor response with a low systemic toxicity.

Reversible pH-responsive MRI contrast with paramagnetic polymer micelles

Paramagnetically-doped polymer micelles, containing an ionizable poly(acrylic acid) (PAA) block, support high-contrast MR imaging at clinically relevant field strengths in a manner that is strongly pH responsive. A reversible switch in polymer strand charge specifically has a direct impact on local rigidity, and rotational correlation time characteristics, of the integrated Gd-chelate, driving a ∼50% amplitude switch in positive contrast.

Nanomedicine: New Frontiers in Fighting Microbial Infections

Microbes have dominated life on Earth for the past two billion years, despite facing a variety of obstacles. In the 20th century, antibiotics and immunizations brought about these changes. Since then, microorganisms have acquired resistance, and various infectious diseases have been able to avoid being treated with traditionally developed vaccines. Antibiotic resistance and pathogenicity have surpassed antibiotic discovery in terms of importance over the course of the past few decades. These shifts have resulted in tremendous economic and health repercussions across the board for all socioeconomic levels; thus, we require ground-breaking innovations to effectively manage microbial infections and to provide long-term solutions. The pharmaceutical and biotechnology sectors have been radically altered as a result of nanomedicine, and this trend is now spreading to the antibacterial research community. Here, we examine the role that nanomedicine plays in the prevention of microbial infections, including topics such as diagnosis, antimicrobial therapy, pharmaceutical administration, and immunizations, as well as the opportunities and challenges that lie ahead.

Adipocytolytic Polymer Nanoparticles for Localized Fat Reduction

The demand for body fat reduction is increasing. However, conventional lipolytic approaches fail to control adipose tissue reduction and cause severe side effects in adjacent nonadipose tissues. A strategy to specifically reduce subcutaneous fat using adipocytolytic polymer nanoparticles in a minimally invasive manner is reported here. The polymer nanoparticles are designed to generate carbon dioxide gas when selectively absorbed by adipocytes. The carbon dioxide gas generated within late endosomes/lysosomes induces adipocytolysis, thereby reducing the number of cells. Localized injection of the adipocytolytic nanoparticles substantially reduces subcutaneous fat in a high-fat diet-induced obese mouse model, without significant changes in hematological or serum biochemical parameters. The adipocytolytic efficacy of the nanoparticles is also evaluated in a porcine model. This strategy addresses the need to develop safe and effective adipocytolytic agents using functional polymer nanoparticles.

Advances in Lung Cancer Treatment Using Nanomedicines

Carcinoma of the lungs is among the most menacing forms of malignancy and has a poor prognosis, with a low overall survival rate due to delayed detection and ineffectiveness of conventional therapy. Therefore, drug delivery strategies that may overcome undesired damage to healthy cells, boost therapeutic efficacy, and act as imaging tools are currently gaining much attention. Advances in material science have resulted in unique nanoscale-based theranostic agents, which provide renewed hope for patients suffering from lung cancer. Nanotechnology has vastly modified and upgraded the existing techniques, focusing primarily on increasing bioavailability and stability of anti-cancer drugs. Nanocarrier-based imaging systems as theranostic tools in the treatment of lung carcinoma have proven to possess considerable benefits, such as early detection and targeted therapeutic delivery for effectively treating lung cancer. Several variants of nano-drug delivery agents have been successfully studied for therapeutic applications, such as liposomes, dendrimers, polymeric nanoparticles, nanoemulsions, carbon nanotubes, gold nanoparticles, magnetic nanoparticles, solid lipid nanoparticles, hydrogels, and micelles. In this Review, we present a comprehensive outline on the various types of overexpressed receptors in lung cancer, as well as the various targeting approaches of nanoparticles.

Dynamics and Equilibration Mechanisms in Block Copolymer Particles

Self-assembly of block copolymers into interesting and useful nanostructures, in both solution and bulk, is a vibrant research arena. While much attention has been paid to characterization and prediction of equilibrium phases, the associated dynamic processes are far from fully understood. Here, we explore what is known and not known about the equilibration of particle phases in the bulk, and spherical micelles in solution. The presumed primary equilibration mechanisms are chain exchange, fusion, and fragmentation. These processes have been extensively studied in surfactants and lipids, where they occur on subsecond time scales. In contrast, increased chain lengths in block copolymers create much larger barriers, and time scales can become prohibitively slow. In practice, equilibration of block copolymers is achievable only in proximity to the critical micelle temperature (in solution) or the order-disorder transition (in the bulk). Detailed theories for these processes in block copolymers are few. In the bulk, the rate of chain exchange can be quantified by tracer diffusion measurements. Often the rate of equilibration, in terms of number density and aggregation number of particles, is much slower than chain exchange, and consequently observed particle phases are often metastable. This is particularly true in regions of the phase diagram where Frank-Kasper phases occur. Chain exchange in solution has been explored quantitatively by time-resolved SANS, but the results are not well captured by theory. Computer simulations, particularly via dissipative particle dynamics, are beginning to shed light on the chain escape mechanism at the molecular level. The rate of fragmentation has been quantified in a few experimental systems, and TEM images support a mechanism akin to the anaphase stage of mitosis in cells, via a thin neck that pinches off to produce two smaller micelles. Direct measurements of micelle fusion are quite rare. Suggestions for future theoretical, computational, and experimental efforts are offered.

Nanoparticles-based phototherapy systems for cancer treatment: Current status and clinical potential

Remarkable progress in phototherapy has been made in recent decades, due to its non-invasiveness and instant therapeutic efficacy. In addition, with the rapid development of nanoscience and nanotechnology, phototherapy systems based on nanoparticles or nanocomposites also evolved as an emerging hotspot in nanomedicine research, especially in cancer. In this review, first we briefly introduce the history of phototherapy, and the mechanisms of phototherapy in cancer treatment. Then, we summarize the representative development over the past three to five years in nanoparticle-based phototherapy and highlight the design of the innovative nanoparticles thereof. Finally, we discuss the feasibility and the potential of the nanoparticle-based phototherapy systems in clinical anticancer therapeutic applications, aiming to predict future research directions in this field. Our review is a tutorial work, aiming at providing useful insights to researchers in the field of nanotechnology, nanoscience and cancer.

Rare earth-doped nanocrystals for bioimaging in the near-infrared region

Rare earth-doped nanocrystals are widely used in medical diagnostics and bioimaging due to their narrow luminescence emission spectra (10-20 nm), long lifetime, and no photobleaching properties. Especially in the near-infrared (NIR) region, deeper tissue imaging can be achieved with low background luminescence and high spatial resolution. Further precise image-guided diagnosis and treatment can be achieved by using multimodal imaging such as MRI/CT/NIR/PA. Here, we focus on the construction of rare earth-doped nanocrystals, optical properties, and progress of such nanocomposites for bioimaging in the NIR region. In addition, the limitations at this stage in the field of bioimaging and the prospects for future technological development of rare earth-doped nanocrystals are present.

Tailoring Polymer-Based Nanoassemblies for Stimuli-Responsive Theranostic Applications

Polymer assemblies on the nanoscale represent a powerful toolbox for the design of theranostic systems when combined with both therapeutic compounds and diagnostic reporting ones. Here, recent advances in the design of theranostic systems for various diseases, containing-in their architecture-either polymers or polymer assemblies as one of the building blocks are presented. This review encompasses the general principles of polymer self-assembly, from the production of adequate copolymers up to supramolecular assemblies with theranostic functionality. Such polymer nanoassemblies can be further tailored through the incorporation of inorganic nanoparticles to endow them with multifunctional therapeutic and/or diagnostic features. Systems that change their architecture or properties in the presence of stimuli are selected, as responsivity to changes in the environment is a key factor for enhancing efficiency. Such theranostic systems are based on the intrinsic properties of copolymers or one of the other components. In addition, systems with a more complex architecture, such as multicompartments, are presented. Selected systems indicate the advantages of such theranostic approaches and provide a basis for further developments in the field.

Uniquely sized nanogels via crosslinking polymerization

Nanogels are very promising carriers for nanomedicine, as they can be prepared in the favorable nanometer size regime, can be functionalized with targeting agents and are responsive to stimuli, i.e. temperature and pH. This induces shrinking or swelling, resulting in controlled release of a therapeutic cargo. Our interest lies in the controlled synthesis of functional nanogels, such as those containing epoxide moieties, that can be subsequently functionalized. Co-polymerization of glycidyl methacrylate and a bifunctional methacrylate crosslinker under dilute conditions gives rise to well-defined epoxide-functional nanogels, of which the sizes are controlled by the degree of polymerization. Nanogels with well-defined sizes (polydispersity of 0.2) ranging from 38 nm to 95 nm were prepared by means of controlled radical polymerization. The nanogels were characterized in detail by FT-IR, DLS, size exclusion chromatography, NMR spectroscopy, AFM and TEM. Nucleophilic attack with functional thiols or amines on the least hindered carbon of the epoxide provides water-soluble nanogels, without altering the backbone structure, while reaction with sodium azide provides handles for further functionalization via click chemistry.

New Degradable Semiconducting Polymers for Photoacoustic Imaging of λ-Carrageenan-Induced Arthritis Mouse Model

Semiconducting polymer has a high extinction coefficient and a long band absorption and can be used as a photoacoustic imaging contrast agent. However, nonbiodegradable semiconducting polymers may cause biosafety issues due to being retained in the body. Therefore, developing degradable semiconducting polymers is necessary for in vivo imaging. Herein, we developed three degradable semiconducting polymers with unique optical properties. We adjusted the optical properties of semiconducting polymers by designing the molecular structure of semiconducting polymers. Polymers with a donor-π-acceptor structure could easily improve the optical properties through adjusting the donor or acceptor units. Through adjusting the electron-donor and -acceptor units, three diketopyrrolopyrrole derivative polymers (DPPTz, DPPQu, and DPPWu) were synthesized and converted into nanosize particles. By introducing the degradable chemical groups in the main chain structure of semiconducting polymers, diketopyrrolopyrrole polymers could be degraded by ClO^-. Among these nanosize particles, DPPTz NPs and DPPQu NPs were used to achieve the in vivo photoacoustic imaging of λ-carrageenan-induced arthritis mouse model. This work provides a novel design idea for the designing of red-shifted semiconducting polymer with degradable properties.

Greenificated Molecularly Imprinted Materials for Advanced Applications

Molecular imprinting technology (MIT) produces artificial binding sites with precise complementarity to substrates and thereby is capable of exquisite molecular recognition. Over five decades of evolution, it is predicted that the resulting host imprinted materials will overtake natural receptors for research and application purposes, but in practice, this has not yet been realized due to the unsustainability of their life cycles (i.e., precursors, creation, use, recycling, and end-of-life). To address this issue, greenificated molecularly imprinted polymers (GMIPs) are a new class of plastic antibodies that have approached sustainability by following one or more of the greenification principles, while also demonstrating more far-reaching applications compared to their natural counterparts. In this review, the most recent developments in the delicate design and advanced application of GMIPs in six fast-growing and emerging fields are surveyed, namely biomedicine/therapy, catalysis, energy harvesting/storage, nanoparticle detection, gas sensing/adsorption, and environmental remediation. In addition, their distinct features are highlighted, and the optimal means to utilize these features for attaining incredibly far-reaching applications are discussed. Importantly, the obscure technical challenges of the greenificated MIT are revealed, and conceivable solutions are offered. Lastly, several perspectives on future research directions are proposed.

Supramolecular engineering of cell membrane vesicles for cancer immunotherapy

The clinical translation of nanomedicines has been strongly hampered by the limitations of delivery vehicles, promoting scientists to search for novel nanocarriers. Although cell membrane-based delivery systems have attracted extensive attention, further functionalizations are urgently desired to augment their theranostic functions. We propose a cell-friendly supramolecular strategy to engineer cell membranes utilizing cyclodextrin-based host-guest molecular recognitions to fix the defects arising from chemical and genetic modifications. In this study, the supramolecular cell membrane vesicles (SCMVs) specifically accumulate in tumors, benefiting from tumor-homing capability and the enhanced permeability and retention effect. SCMVs co-delivering indocyanine green and an indoleamine 2,3-dioxygenase inhibitor effectively ablate tumors combining photodynamic therapy and immunotherapy. Driven by host-guest inclusion complexation, SCMVs successfully encapsulate resiquimod to repolarize tumor-associated macrophages into M1 phenotype, synergizing with immune checkpoint blockade therapy. This supramolecular engineering methodology based on noncovalent interactions presents a generalizable and cell-friendly tactic to develop living cell-originated nanomaterials for precise cancer therapy.

Porphyrin-Based Nanoparticles: A Promising Phototherapy Platform

Phototherapy, including photodynamic therapy and photothermal therapy, is an emerging form of non-invasive treatment. The combination of imaging technology and phototherapy is becoming an attractive development in the treatment of cancer, as it allows for highly effective therapeutic results through image-guided phototherapy. Porphyrins have attracted significant interest in the treatment and diagnosis of cancer due to their excellent phototherapeutic effects in phototherapy and their remarkable imaging capabilities in fluorescence imaging, magnetic resonance imaging and photoacoustic imaging. However, porphyrins suffer from poor water solubility, low near-infrared absorption and insufficient tumor accumulation. The development of nanotechnology provides an effective way to improve the bioavailability, phototherapeutic effect and imaging capability of porphyrins. This review highlights the research results of porphyrin-based small molecule nanoparticles in phototherapy and image-guided phototherapy in the last decade and discusses the challenges and directions for the development of porphyrin-based small molecule nanoparticles in phototherapy.

Porous organic polymers for drug delivery: hierarchical pore structures, variable morphologies, and biological properties

Porous organic polymers have received considerable attention in recent years because of their applicability as biomaterials. In particular, their hierarchical pore structures, variable morphologies, and tunable biological properties make them suitable as drug-delivery systems. In this review, the synthetic and post forming/control methods including templated methods, template-free methods, mechanical methods, electrospun methods, and 3D printing methods for controlling the hierarchical structures and morphologies of porous organic polymers are discussed, and the different methods affecting their specific surface areas, hierarchical structures, and unique morphologies are highlighted in detail. In addition, we discuss their applications in drug encapsulation and the development of stimuli (pH, heat, light, and dual-stimuli)-responsive materials, focusing on their use for targeted drug release and as therapeutic agents. Finally, we present an outlook concerning the research directions and applications of porous polymer-based drug delivery systems.

A pH-Responsive Nanoparticle Library with Precise pH Tunability by Co-Polymerization with Non-Ionizable Monomers

Precise monitoring of the subtle pH fluctuation during biological events remains a big challenge. Previously, we reported an ultra-pH-sensitive (UPS) nanoprobe library with a sharp pH response using co-polymerization of two tertiary amine-containing monomers with distinct pK_a . Currently, we have generalized the UPS nanoparticle library with tunable pH transitions (pH_t ) by copolymerization of a tertiary amine-containing monomer with a series of non-ionizable monomers. The pH_t of nanoparticles is fine-tuned by the non-ionizable monomers with different hydrophobicity. Each non-ionizable monomer presents a constant contribution to pH tunability regardless of tertiary amine-containing monomers. Based on this strategy, we produced two libraries of nanoprobes with continuous pH_t covering the entire physiological pH range (5.0-7.4) for fluorescent imaging of endosome maturation and cancers. This generalized strategy provides a powerful toolkit for biological studies and cancer theranostics.

Topologically Precise and Discrete Bottlebrush Polymers: Synthesis, Characterization, and Structure-Property Relationships

As the complexity of polymer structure grows, so do the challenges for developing an accurate understanding of their structure-property relationships. Here, the synthesis of bottlebrush polymers with topologically precise and fully discrete structures is reported. A key feature of the strategy is the synthesis of discrete macromonomer libraries for their polymerization into topologically precise bottlebrushes that can be separated into discrete bottlebrushes (Đ = 1.0). As the system becomes more discrete, packing efficiency increases, distinct three-phase Langmuir-Blodgett isotherms are observed, and its glass transition temperature becomes responsive to side-chain sequence. Overall, this work presents a versatile strategy to access a range of precision bottlebrush polymers and unravels the impact of side-chain topology on their macroscopic properties. Precise control over side chains opens a pathway for tailoring polymer properties without changing their chemical makeup.

pH/ROS dual-responsive supramolecular polypeptide prodrug nanomedicine based on host-guest recognition for cancer therapy

Supramolecular nanomedicine assembly combined with polypeptide prodrug could become a powerful strategy to minimize drug leakage in blood circulation and trigger sufficient drug release at tumor tissue. Here, we developed a charge-reversal amphiphilic pillar[5]arene-modified polypeptide (P5-PLL-DMA), and reactive oxygen species (ROS)-sensitive polypeptide prodrug (P-PLL-DOX) including a ROS-cleavable thioketal (TK) linker between doxorubicin (DOX) and poly(_L-lysine) (PLL), which could assemble via pillar[5]arene host-guest recognition, and further encapsulate chlorin e6 (Ce6) to obtain a supramolecular polypeptide prodrug (SPP-DOX/Ce6). The chemical conjugation to load drugs of DOX and the negatively charge of SPP-DOX/Ce6 could prevent premature drug leakage, and reduce undesirable interaction with serum proteins to enhance stability under physiological conditions (pH 7.4). Simultaneously, the carried charge of SPP-DOX/Ce6 reversed from negative to positive could effectively enhance the cellular internalization for efficient DOX delivery under acidic tumor microenvironment (pH 6.5). Upon 660 nm near-infrared light (NIR) irradiation, the ROS generated by encapsulated Ce6 rapidly cleaved the TK linker to release activated DOX, inducing the tumor-specific drug delivery. This intelligent supramolecular polypeptide prodrug based on pillar[5]arene host-guest recognition represents new avenues to develop stimulus responsive prodrug for enhanced cancer therapy with minimized the side effect. STATEMENT OF SIGNIFICANCE: In this work, a pH/ROS dual-sensitive supramolecular polypeptide prodrug (SPP-DOX/Ce6) was developed to minimize drug leakage in blood circulation and trigger sufficient drug release at tumor tissue. The chemical conjugation to load drugs of DOX via a ROS-cleavable thioketal (TK) linker and the distinctive charge-reversal capacity of SPP-DOX/Ce6 significantly enhances the stability under physiological conditions (pH 7.4), while facilitates cellular uptake at tumor site (pH 6.8). Upon 660 nm near-infrared light (NIR) irradiation, the ROS generated by encapsulated Ce6 induces the rapid cleavage of TK linker to release activated DOX, achieving a tumor-specific drug delivery. This intelligent supramolecular polypeptide prodrug SPP-DOX/Ce6 provides an effective strategy to construct stimulus responsive prodrug for enhanced cancer therapy.

A novel multifunctional nanoparticles formed by molecular recognition between AS1411 aptamer and redox-responsive paclitaxel-nucleoside analogue prodrug for combination treatment of β-lapachone and paclitaxel

Despite its high antitumor activity, the clinical application of chemotherapy is greatly impeded by lacking of specific accumulation and poor solubility. To address the above challenges, we designed a AS1411 aptamer modified nanoparticles based on molecular recognition of nucleobases. Firstly, a redox sensitive Paclitaxel-SS-Zidovudine (PZ) prodrug was synthesized. Then PZ/β-lapachone/AS1411/DSPE-PEG nanoparticles were prepared and AS1411 aptamer was connected through molecular recognition between the nucleoside analogue Zidovudine (ZDV) and the thymine on aptamer. DSPE-PEG (DP) was incorporated into nanoparticles to prolong the residence time of nanoparticles in the blood circulation. Furthermore, to realize the combination treatment, β-lapachone (LAP) has been incorporated into nanoparticles with high drug loading efficiency through the interaction of π-π stacking force and H-bonding between LAP and Paclitaxel (PTX). LAP can generate abundant exogenous reactive oxygen species (ROS) via the bioactivation of NAD(P)H: quinone oxidoreductase-1 (NQO1). Moreover, the connection of Zidovudine (ZDV) and AS1411 through molecular recognition of nucleobases further optimized the nanoparticles with high affinity to nucleolin which overexpressed on tumor cell membrane, thereby inducing the specific accumulation of nanoparticles in tumor sites. In vivo and in vitro studies showed that the obtained nanoparticles of PZ/LAP/AS1411/DP exhibited better tumor growth inhibition and lower systemic side effects. Herein, we have rationally conducted a novel self-codelivery system for effectively synergistic antitumor treatment.