Recent Update on UV Disinfection to Fulfill the Disinfection Credit Value for Enteric Viruses in Water

Overlooked Role of Iodate in Micropollutant Degradation by UV/Periodate: Kinetic Modeling and Mechanism

The periodate (PI, IO4-) is known as an emerging oxidant and disinfectant in water treatment with iodate (IO3-) as the benign end product. However, new results herein strongly suggest that IO3- could contribute to pollutant degradation and trigger disinfection byproduct (DBP) formation in the UV/IO4- process. The degradation of micropollutants, e.g., 17α-ethinylestradiol (EE2), followed two-stage pseudo-first-order kinetics along with the conversion of IO4- (stage I) to IO3- (stage II) in the UV/IO4- process. The radical scavenging experiments and electron spin resonance technique confirmed both reactive oxygen species (e.g., •OH and O3) and reactive iodine species (RIS) (e.g., IO3•), contributing to contaminant degradation in the UV/IO4- system. A kinetic model based on first-principles was further developed to simulate reaction kinetics, revealing that •OH was the primary reactive species responsible for EE2 degradation in stage I, while RIS, especially IO3•, played major contributions in stage II. The photolysis of IO3- in stage II could increase the risk of iodinated DBP (I-DBP) formation, especially under acidic conditions. The new findings of this work broaden the mechanistic knowledge on the UV/IO4- process and highlight the overlooked role of IO3- in the worrisome I-DPB formation in the wastewater treatment.

Systematic Review and Meta-analysis on the Inactivation Rate of Viruses and Bacteriophage by Solar Wavelength Radiation

Sunlight is a known biocide, and photodriven inactivation is an important avenue for controlling viruses in both natural and engineered systems. However, there remain significant unknowns regarding damage to viruses by sunlight, including the impact of wavelength and viral characteristics. Herein, a systematic review of the literature and meta-analysis was conducted to identify inactivation rate constants (k-values) when exposed to solar wavelengths (280-700 nm) for common human viruses and surrogates in natural and synthetic matrices. We identified 457 k-values, with 356 for nonenveloped viruses. Extracted rate constants were transformed into UV fluence-normalized k-values to isolate the most photobiologically relevant wavelengths in the solar spectrum and reported for the first time in terms of energy, rather than time, based units. Each spectral region was assessed independently, with UVB illumination reporting the highest inactivation rates, UVA contributing to inactivation both in the presence and absence of photosensitizers, and visible light demonstrating no biocidal activity. Inactivation mechanisms are reviewed identifying knowledge gaps in translating UVC mechanisms to longer wavelengths. The data compiled in this meta-analysis can be applied to inform the environmental transport of viruses, estimate solar disinfection performance in variable light conditions, or design disinfection systems based on UVA and UVB light.

Interfacial Microenvironment Modulation Enhancing Electron Transfer between Quasi-MOFs and Defective Semiconductor Arrays for Enhanced Photocatalytic Sterilization

Interfacial electron transfer between an inorganic semiconductor and a metal-organic framework (MOF) is the key to photocatalysis in a composite photocatalytic system. The construction of structural defects in a single semiconductor or MOF has been regarded as an effective method for enhancing its photocatalytic performance. However, how the microenvironment modulation of photocatalytic sites between defective semiconductors and defective MOFs (quasi-MOFs) affects photocatalytic disinfection activity is worth studying. Herein, the integration of MOFs and semiconductors and their crystal defect construction is achieved by directly dropping ZIF-8 suspension onto the bismuth vanadate (BiVO4) nanoarray and subsequently activating it through low-temperature (300 °C) calcination under an N2 atmosphere. Compared with the original BiVO4 nanoarray, defective BiVO4 nanoarray (BiVO4-N2), and BiVO4-ZIF-8 nanoarray, (BiVO4-ZIF-8)-N2 exhibits enhanced photocatalytic disinfection activity (6.63 log10 CFU mL-1 after 4 h of simulated sunlight irradiation) due to its improved sluggish kinetics of electron transfer. In situ irradiated operando near-ambient pressure XPS (NAP-XPS) confirms its interfacial electron transfer, which can greatly modulate the microenvironment of the photocatalytic site and thus lead to efficient photocatalysis. This work presents a simple strategy to adjust the microenvironment of the photocatalytic sites between ZIF-8 and semiconductors to optimize photocatalytic bactericidal performance.

Kinetics and Mechanisms of Solar UVB Disinfection of Vesicle-Cloaked Murine Norovirus Clusters and Free Noroviruses

Human norovirus, a major global cause of gastroenteritis, forms vesicle-cloaked virus clusters (known as viral vesicles), showing increased infectivity and persistence in aquatic environments. We investigated UVB disinfection, a key mechanism of solar disinfection commonly employed in developing countries, targeting murine norovirus vesicles and free murine noroviruses as surrogates for human noroviruses. At low viral concentrations of 109 gene copies per liter, viral infectivity loss as quantified by the integrated cell culture-reverse transcription-quantitative polymerase chain reaction (ICC-RT-qPCR) indicated that vesicles were 1.51 to 1.73 times more resistant to disinfection compared to free viruses. Virus inactivation was primarily due to protein damage as quantified by bicinchoninic acid and Western blot assays, and the damage of virus binding to host cells as quantified by RT-qPCR. Molecular simulations predicted that the oxidation of a tyrosine residue in the viral protein 1 prohibited binding. UVB irradiation of viral/vesicle proteins resulted in 1O2 formation as quantified by time-resolved phosphorescence, and for the first time, endogenous 1O2 was confirmed to contribute to virus inactivation by UVB. Our study recognizes the limitation of UVB disinfection of viral vesicles particularly in solar wastewater treatment and advocates for enhanced disinfection strategies to protect public health.

Impact of storage temperature and ultraviolet irradiation on rotavirus survival on food matrices

This study investigated the survival of human rotavirus (HRV) on fresh beef, chicken, and lettuce stored at various temperatures, as well as the effect of UV-C exposure on HRV viability on these food surfaces. At 20 °C, the survival rate of three HRV strains (WA, 89-12C2, and DS-1) on beef, chicken, and lettuce decreased within 3 days, with the most significant reduction observed on beef. When stored at 4 °C, a significant reduction in HRV viability was observed by day 7, with the greatest decrease observed on beef, followed by chicken and lettuce. Conversely, storage at -20 °C for up to 28 days did not significantly reduce HRV viability on any of the food surfaces. Exposure to UV-C irradiation at a dosage of 100 mJ/cm2 reduced the viral titers on beef and chicken surfaces by approximately 1 log10 PFU/mL, while those on the surfaces of lettuce were more than 4 log10 PFU/mL. These findings indicate that HRV strains exhibit strong viability on beef, chicken, and lettuce surfaces, enduring extended periods at low temperatures, but display varying susceptibility to UV-C irradiation. Due to the persistence of HRV on contaminated food, implementing effective measures to prevent food contamination is crucial. The findings of this study contribute to the development of a robust sanitation strategy utilizing UV-C to mitigate foodborne HRV transmission.

Greywater recycling for diverse collection scales and appliances: Enteric pathogen log-removal targets and treatment trains

In light of increasingly diverse greywater reuse applications, this study proposes risk-based log-removal targets (LRTs) to aid the selection of treatment trains for greywater recycling at different collection scales, including appliance-scale reuse of individual greywater streams. An epidemiology-based model was used to simulate the concentrations of prevalent and treatment-resistant reference pathogens (protozoa: Giardia and Cryptosporidium spp., bacteria: Salmonella and Campylobacter spp., viruses: rotavirus, norovirus, adenovirus, and Coxsackievirus B5) in the greywater streams for collection scales of 5-, 100-, and a 1000-people. Using quantitative microbial risk assessment (QMRA), we calculated LRTs to meet a health benchmark of 10-4 infections per person per year over 10'000 Monte Carlo iterations. LRTs were highest for norovirus at the 5-people scale and for adenovirus at the 100- and 1000-people scales. Example treatment trains were designed to meet the 95 % quantiles of LRTs. Treatment trains consisted of an aerated membrane bioreactor, chlorination, and, if required, UV disinfection. In most cases, rotavirus, norovirus, adenovirus and Cryptosporidium spp. determined the overall treatment train requirements. Norovirus was most often critical to dimension the chlorination (concentration × time values) and adenovirus determined the required UV dose. Smaller collection scales did not generally allow for simpler treatment trains due to the high LRTs associated with viruses, with the exception of recirculating washing machines and handwashing stations. Similarly, treating greywater sources individually resulted in lower LRTs, but the lower required LRTs nevertheless did not generally allow for simpler treatment trains. For instance, LRTs for a recirculating washing machine were around 3-log units lower compared to LRTs for indoor reuse of combined greywater (1000-people scale), but both scenarios necessitated treatment with a membrane bioreactor, chlorination and UV disinfection. However, simpler treatment trains may be feasible for small-scale and application-scale reuse if: (i) less conservative health benchmarks are used for household-based systems, considering the reduced relative importance of treated greywater in pathogen transmission in households, and (ii) higher log-removal values (LRVs) can be validated for unit processes, enabling simpler treatment trains for a larger number of appliance-scale reuse systems.

Sandwich-structured continuous ZIF-8/Ti3C2 MXene/ZIF-8 for efficient sterilization: Enhanced photocatalytic activity, photothermal effect, and environmental safety

The development of effective water purification systems is crucial for controlling and remediating environmental pollution, especially in terms of sterilization. Herein, we demonstrate elaborately designed composite nanosheets with a sandwich structure, composed of two-dimensional (2D) Ti3C2 MXene nanosheet core and conformal ZIF-8 ultrathin outer layers, and their potential applications in photocatalytic sterilization. The study results indicate that the conformal ZIF-8-MXene nanosheet exhibits an expanded light absorption range (826 nm), improved photothermal conversion efficiency (6.2 °C s-1), and photocurrent response, thus boosting photocatalytic sterilization efficiency (6.63 log10 CFU mL-1) against Escherichia coli under simulated sunlight within 90 min. Interestingly, 2D ZIF-8 layers exhibit positive zeta potential (19 mV), good hydrophilicity (40.6°), and local photogenerated-hole accumulation, possessing efficient bacteria-trapping efficiency. Membrane filters fabricated from optimized composite nanosheets exhibit an outstanding bacteria-trapping and sterilization efficiency (almost 100 %) against Escherichia coli under simulated sunlight within 30 min of the flow photocatalytic experiments. This work not only presents a rational structural design of the conformal and ultrathin anchoring of ZIF-8 onto a 2D conductive material for bacteria-trapping and sterilization, but also opens new opportunities for using metal-organic frameworks in photocatalytic disinfection of drinking water.

Novel sunlight-induced monochloramine activation system for efficient microcontaminant abatement

As an eco-friendly and sustainable energy, solar energy has great application potential in water treatment. Herein, simulated sunlight was for the first time utilized to activate monochloramine for the degradation of environmental organic microcontaminants. Various microcontaminants could be efficiently degraded in the simulated sunlight/monochloramine system. The average innate quantum yield of monochloramine over the wavelength range of simulated sunlight was determined to be 0.068 mol/Einstein. With the determined quantum yield, a kinetic model was established. Based on the good agreement between the simulated and measured photolysis and radical contributions to the degradation of ibuprofen and carbamazepine, the major mechanism of monochloramine activation by simulated sunlight was proposed. Chlorine radical (Cl∙) and hydroxyl radical (HO∙) were major radicals responsible for microcontaminant degradation in the system. Moreover, the model facilitated a deep investigation into the effects of different reaction conditions (pH, monochloramine concentration, and water matrix components) on the degradation of ibuprofen and carbamazepine, as well as the roles of the involved radicals. The differences between simulated and measured degradation data of each microcontaminant under all conditions were less than 10 %, indicating the strong reliability of the model. The model could also make good prediction for microcontaminant degradation in the natural sunlight/monochloramine system. Furthermore, the formation of disinfection byproducts (DBPs) was evaluated at different oxidation time in simulated sunlight/monochloramine with and without post-chloramination treatment. In real waters, organic components showed more pronounced suppression on microcontaminant degradation efficiency than inorganic ions. This study provided a systematic investigation into the novel sunlight-induced monochloramine activation system for efficient microcontaminant degradation, and demonstrated the potential of the system in practical applications.

Activated sludge and UV-C254 for Sapovirus, Aichivirus, Astrovirus, and Adenovirus processing

In this study, the detection rates of four enteric viruses, Human Astrovirus (HAstVs), Aichivirus (AiVs), Human Adenovirus (HAdVs), and Sapovirus (SaVs) are carried out to assess the virological quality of the treated wastewater. A total of 140 samples was collected from wastewater treatment plant WWTP of Tunis-City. Real-time RT-PCR and conventional RT-PCR results showed high frequencies of detection of the four enteric viruses investigated at the entry and exit of the biological activated sludge procedure and a significant reduction in viral titers after tertiary treatment with UV-C254 irradiation. These results revealed the ineffectiveness of the biological activated sludge treatment in removing viruses and the poor quality of the treated wastewater intended for recycling, agricultural reuse, and safe discharge into the natural environment. The UV-C254 irradiation, selected while considering the non-release of known disinfection by-products because of eventual reactions with the large organic and mineral load commonly present in the wastewater.

Persistence of Infectious Human Norovirus in Estuarine Water

Norovirus is the predominant cause of viral acute gastroenteritis globally. While person-to-person is the most reported transmission route, norovirus is also associated with waterborne and foodborne illness, including from the consumption of contaminated bivalve molluscan shellfish. The main cause of shellfish contamination is via the bioaccumulation of norovirus from growing waters impacted by human wastewater. However, data on the persistence of infectious norovirus in the environment are limited due to a lack of a human norovirus culture method in the past. In this study, we applied the recently established method of norovirus replication in human intestinal enteroids to determine the persistence of norovirus in artificial estuarine water at 25 ppt for up to 21 days at 4 °C and 16 °C in the dark. Infectious norovirus was detected for up to 21 days. The relative infectivity declined from 100 to 3% at day 21, with decay rate constants of 0.07 day-1 at 4 °C and 0.17 day-1 at 16 °C. There was no decrease in norovirus titres as measured by reverse transcription-droplet digital PCR (RT-ddPCR), confirming the lack of the relationship between norovirus infectivity and direct detection by PCR. The results confirm that norovirus can remain infectious for at least 3 weeks in an estuarine water environment, presenting associated health risks.

Tailored hybrid microbial water disinfection system using sequentially assembled microbial fuel cells and an ultraviolet C light-emitting diode

An integrated ultraviolet C light-emitting diode (UV-C LED) water disinfection system activated by microbial fuel cells (MFCs) was developed, and optimized via electric circuit and device voltage profiling. The intensity of the renewable energy operated, self-powered UV-C LED for E. coli inactivation was calculated by bio-dosimetry to be 2.4  × 10-2 μW cm-2 using fluence-based rate constant (k) of ∼1.03 (±0.11) cm2/mJ to obtain the reduction equivalent fluence kinetics value. Finally, the first-order rate constant for E. coli inactivation during the tailored hybrid disinfection system was found to be 0.53 (±0.1) cm2/mJ by multiplying intensity with 1.09 (±0.1) × 10-5 s-1 derived from the linear regression of E. coli inactivation as a function of time. Furthermore, selected model microbial consisting of two bacteria (Salmonella sp. and Listeria sp.) and three viruses (MS2 bacteriophage, influenza A virus, and murine norovirus-1) were treated with UV-C LED irradiation under controlled experimental conditions to validate the disinfection efficiency of the system. Consequently, the required to achieve significant removal (i.e., >3-log; 99.9%) UV fluence and dose time were calculated to be 4-7 cm2/mJ and 54-76 h and 33-53 cm2/mJ and 400-622 h for model bacterial and viral, respectively. This study expands the applicability of microbial electrochemical system (MES) for microbial disinfection and could be utilized in future MFCs implementation studies for predicting and measuring the kinetics of microbial elimination using a tailored hybrid water treatment system.

Pepper Mild Mottle Virus as a Potential Indicator of Fecal Contamination in Influents of Wastewater Treatment Plants in Riyadh, Saudi Arabia

Several indicators of fecal pollution in water resources are continuously monitored for their reliability and, of particular interest, their correlation to human enteric viruses-not justified by traditional bacterial indicators. Pepper mild mottle virus (PMMoV) has recently been proposed as a successful viral surrogate of human waterborne viruses; however, in Saudi Arabia there are no available data in terms of its prevalence and concentration in water bodies. The concentration of PMMoV in three different wastewater treatment plants (King Saud University (KSU), Manfoha (MN), and Embassy (EMB) wastewater treatment plants (WWTP)) was measured using qRT-PCR during a one-year period and compared to the human adenovirus (HAdV), which is highly persistent and considered an indicator for viral-mediated fecal contamination. PMMoV was found in ~94% of the entire wastewater samples (91.6-100%), with concentrations ranging from 62 to 3.5 × 107 genome copies/l (GC/l). However, HAdV was detected in 75% of raw water samples (~67-83%). The HAdV concentration ranged between 1.29 × 103 GC/L and 1.26 × 107 GC/L. Higher positive correlation between PMMoV and HAdV concentrations was detected at MN-WWTP (r = 0.6148) than at EMB-WWTP (r = 0.207). Despite the lack of PMMoV and HAdV seasonality, a higher positive correlation (r = 0.918) of PMMoV to HAdV was recorded at KSU-WWTP in comparison to EMB-WWTP (r = 0.6401) around the different seasons. Furthermore, meteorological factors showed no significant influence on PMMoV concentrations (p > 0.05), thus supporting the use of PMMoV as a possible fecal indicator of wastewater contamination and associated public health issues, particularly at MN-WWTP. However, a continuous monitoring of the PMMoV distribution pattern and concentration in other aquatic environments, as well as its correlation to other significant human enteric viruses, is essential for ensuring its reliability and reproducibility as a fecal pollution indicator.

Work function mediated interface charge kinetics for boosting photocatalytic water sterilization

Photocatalytic sterilization is an eco-friendly strategy to utilize solar energy for treating water contaminated with resistant bacteria. Here, we propose interface engineering to induce an internal electric field (IEF) in leaf-like Ti₃C₂Tx/TiO₂ based on the work function (Φ) theory, which enhances photocatalytic sterilization performance by steering interface charge kinetics. Density functional theory (DFT) calculations and in situ irradiation X-ray photoelectron spectroscopy (ISI-XPS) results show that photogenerated charge carriers can be directionally separated by the IEF. The efficient charge kinetics benefits the reactive oxygen species (ROS) generation and hence a superior broad-spectrum sterilization performance. We employ the intrinsic physical characteristics of MXene to steer interface charge kinetics for photocatalysis, which exhibits great potential in water disinfection.

A review on disinfection methods for inactivation of waterborne viruses

Water contamination is a global health problem, and the need for safe water is ever-growing due to the public health implications of unsafe water. Contaminated water could contain pathogenic bacteria, protozoa, and viruses that are implicated in several debilitating human diseases. The prevalence and survival of waterborne viruses differ from bacteria and other waterborne microorganisms. In addition, viruses are responsible for more severe waterborne diseases such as gastroenteritis, myocarditis, and encephalitis among others, hence the need for dedicated attention to viral inactivation. Disinfection is vital to water treatment because it removes pathogens, including viruses. The commonly used methods and techniques of disinfection for viral inactivation in water comprise physical disinfection such as membrane filtration, ultraviolet (UV) irradiation, and conventional chemical processes such as chlorine, monochloramine, chlorine dioxide, and ozone among others. However, the production of disinfection by-products (DBPs) that accompanies chemical methods of disinfection is an issue of great concern due to the increase in the risks of harm to humans, for example, the development of cancer of the bladder and adverse reproductive outcomes. Therefore, this review examines the conventional disinfection approaches alongside emerging disinfection technologies, such as photocatalytic disinfection, cavitation, and electrochemical disinfection. Moreover, the merits, limitations, and log reduction values (LRVs) of the different disinfection methods discussed were compared concerning virus removal efficiency. Future research needs to merge single disinfection techniques into one to achieve improved viral disinfection, and the development of medicinal plant-based materials as disinfectants due to their antimicrobial and safety benefits to avoid toxicity is also highlighted.

Design of 3D-Printed Electronic Fiber Optic Sensor to Detect Rhodamine B Reagent: An Initiation to Potential Virus Detection

A fluorescence device based on ultraviolet light is proposed in this paper, which currently stands at the design stage with the eventual aim to potentially detect virus/antibody fluorescence reactions. The designed device is proposed to have the characteristics of high reflectivity, low power consumption, wide spectrum of light source, and proper silver coating. For fabrication and raising product quality, 3D printing technology and a sputtering test will be used. In this connection, this paper firstly introduces the design sources; then, the ideas of inventing fluorescence detection devices based on ultraviolet light, followed by the data analysis as well as discussing the results of computer simulations. The design process, materials, methods, and experiments are demonstrated following the reality work procedure. Instead of directly using a virus or antibodies for the experiment, at the current design stage, we focus on using this device to detect the rhodamine B reagent. Experiment shows that this reagent can be successfully detected. With this achievement, we logically believe that such type of an ultraviolet optical sensor, with further development and testing, may have the possible value to detect a single virus such as COVID-19, as well as other viruses or small molecules. Though there is long way to go to achieve such a goal, future works experimenting with the detection device on real virus or antibodies can take place more efficiently with a good foundation.

Recent advances on inactivation of waterborne pathogenic microorganisms by (photo) electrochemical oxidation processes: Design and application strategies

Compared with other conventional water disinfection processes, (photo) electrochemical oxidation (P/ECO) processes have the characteristics of environmental friendliness, convenient installation and operation, easy control and high efficiency of inactivating waterborne pathogenic microorganisms (PMs), so that more and more research work has been focused on this topic, but there is still a huge gap between the research and practical application. Here, the research network of inactivating PMs by P/ECO processes has been comprehensively summarized, and the electrode/reactor/process design strategies based on strengthening direct and indirect oxidation, enhancing mass transfer efficiency and electron transfer efficiency, and improving the effective dose of electrogenerated oxidants are discussed. Furthermore, the factors affecting the inactivation of PMs and the issues regarding to stability and lifetime of the electrode are discussed respectively. Finally, the important research priorities and possible research challenges of P/ECO processes are put forward to make significant progress of this technology.