Improved Electronic Structure from Spin-State Reconstruction of a Heteronuclear Fe-Co Diatomic Pair to Boost the Fenton-like Reaction

Selective activation of peroxymonosulfate through gating heteronuclear diatomic distance for flexible generation of high-valent cobalt-oxo species or sulfate radicals

Heteronuclear diatomic engineering has been widely applied to generate selective or nonselective active species in Fenton-like system for wastewater treatment. However, active species adapted to diverse wastewater were different, and flexible control of active species has remained elusive, often necessitating complex and repetitive atom modifications. Here, we proposed a diatomic distance gating strategy that adjusted the spintronic structure of cobalt site for flexible transformation of high-valent cobalt-oxo and sulfate radical for adapted wastewater treatment. Electron paramagnetic resonance spectra, magnetic susceptibility-temperatur curve and partial density of states revealed electron transfer from dx2-y2, dz2 and dyz orbitals of high-spin cobalt to peroxymonosulfate for high-valent cobalt-oxo generation at 3.8 nm, and from dz2 orbital of medium-spin cobalt to peroxymonosulfate for sulfate radical generation at 2.5 nm. The Fenton-like system with 3.8 nm of diatomic distance preferentially degraded contaminants with low n-octanol/water partition constant and high ionization potential, while Fenton-like system with 2.5 nm of diatomic distance readily degraded contaminants with high Hammett substituent constant and low dissociation constant. This study elucidated the effect of diatomic distance on Fenton-like chemistry and provided a blueprint for the design of intelligent Fenton-like system for treating diverse wastewater treatment scenarios.

State-Of-The-Art Structural Regulation Methods and Quantum Chemistry for Carbon-Based Single-Atom Catalysts in Advanced Oxidation Process: Critical Perspectives into Molecular Level

Advanced oxidation processes (AOPs) by carbon-based single-atom catalysts (SACs) are recognized as an attractive scientific frontier for water treatment, with the outstanding benefits of ultra-effective and anti-interference capability. However, most of the research has paid more attention to the performance of SACs, while the in-depth understanding of catalytic regulation by molecular interaction is relatively deficient. This critical review delves into deciphering the catalytic mechanism through a micro-level, which makes it more convenient to interpret apparent catalytic phenomena. It first summarizes basic theories of quantum chemistry, which provide mechanism interpretation and prediction for molecular-oxidation systems. Additionally, corresponding oxidation pathways of common oxidants are underscored. Following the oxidants, state-of-the-art regulation methods are discussed with special attention to involved molecular interactions and pollutants. Particularly, the preliminary insights into the "oxidant-catalyst-pollutants" internal relationships are provided to help construct the SAC-AOP system from a molecular standpoint. Meanwhile, some cutting-edge laboratory devices and pilot-scale engineering are presented to illustrate the ultimate purpose of scientific molecular exploration. Eventually, relative challenges of SACs-AOPs upon the design of catalytic systems and investigation methods are provided. This review aims to promote the large-scale potential of SACs-based AOPs in practical water treatment by emphasizing the pivotal role of micro-insights.

Coordination Anions Dimensionality-Engineered Dual-Atom Catalysts for Enhanced Fenton-Like Reactions: 3D Coordination Induced Spin-State Transition

Dual-atom catalysts (DACs) have shown significant application potential in Fenton-like reactions. However, effectively modulating their electronic structure and fully understanding the mechanisms driving their high catalytic activity remain challenging. Herein, we propose a coordination anions dimensionality engineering strategy to synthesize biomass-derived dual-atom FeCo-N4O1C catalysts, in which Fe and Co atoms are bridged by two-dimensional planar N atoms and a three-dimensional (3D) axial O atom. Experimental data and theoretical calculations reveal that the 3D coordination structure of FeCo-N4O1C induces the spin state of Fe undergo a transition from a low spin state to an intermediate spin state compared with single-atom Fe-N4O1C, resulting in moderate adsorption and desorption of intermediates, thus reducing the energy barriers for generating more singlet oxygen and high-valent cobalt-oxo species during peroxymonosulfate activation. The electron transfer from Co atoms to neighboring Fe atoms through N atoms and 3D axial O atoms can effectively prevent the poisoning of active species. Benefiting from the 3D coordination structure and the synergistic effects of multiple active sites, the catalyst-dose normalized reaction rate constant reaches 14.5 L min-1 g-1 under low peroxymonosulfate concentrations─an improvement of 1 ∼ 2 orders of magnitude over most reported catalysts. The practical applicability of FeCo-N4O1C is demonstrated through nearly 100% pollutant removal during 7 days of continuous operation in a membrane filtration system. This study provides deep insights into the relationship between electronic structure and catalytic performance through spin-state regulation of DACs, and introduces a promising approach for large-scale synthesis of low-cost, highly efficient DACs for Fenton-like reactions.

Diatomic "catalytic/co-catalytic" Fe/Mo catalysts promote Fenton-like reaction to treat organic wastewater through special interfacial reaction enhancement mechanism

The full utilization of active sites and the effective Fe2+/Fe3+cycling are the key problems that expand the application of iron-based Fenton-like reaction in water purification. In this paper, a novel diatomic Fe/Mo catalyst (Fe/Mo-DACs) was used to enhance the interfacial reaction mechanism with oxidant to achieve more stronger selective degradation of electron-donating organic pollutants. The availability of Fe sites during the activation of peroxymonosulfate (PMS) was enhanced by the adjacent atomic Mo sites, and the resulting special interfacial complex (Fe/Mo-DACs-PMS*) possessed higher activity, stability and selectivity (especially for electron-donating organics). The degradation rate of bisphenol A (BPA) in Fe/Mo-DACs/PMS system (0.642 min-1) was increased by two times compared with the corresponding Fe single-atomic reaction system. Density functional theory calculation analysis further indicated that the diatomic Fe/Mo site was the true activation center of PMS, and other independent single-atom Fe sites cooperated to optimize the interface reaction mechanism (adsorption and activation) of PMS on the materials' surface. Moreover, the promotion of Fe2+/Fe3+ cycling by Mo sites further enhanced the sustainability and adaptability of this degradation system. The atomic-level "catalytic/co-catalytic" materials are expected to broaden the design idea of heterogeneous materials and enhance the application prospect of Fenton-like reactions in water pollution control.

Spin State Regulation for Peroxide Activation: Fundamental Insights and Regulation Mechanisms

Peroxides are widely used in environmental applications due to their strong oxidizing properties, however, traditional activation methods often face challenges such as uncontrolled reactive oxygen species (ROS) generation and high energy barriers. Recent advancements in spin state regulation provide a promising alternative to enhance the efficiency of peroxide activation. This review provides an overview of spin fundamentals and discusses the key factors affecting spin state in catalytic materials, including crystal field configuration, ligand environment, and valence changes. Subsequently, the role of electron spin state in peroxide activation is comprehensively analyzed, with a focus on how spin state regulation can tune adsorption energy, lower energy barriers, facilitate electron transfer between transition metals and peroxides, and promote selective ROS generation. Finally, this review briefly outlines the practical applications of peroxide activation in water treatment and concludes with a summary and perspectives on future research directions. This review aims to provide a comprehensive perspective on the role of spin state regulation in advancing peroxide activation strategies.

Cathode-mediated electrochemical conversion of phenol to benzoquinone in wastewater: High yield rate and low energy consumption

Selective conversion of organic pollutants in wastewater into value-added chemicals is a promising strategy for sustainable water management. Electrochemical processes offer attractive features of precise control over reaction pathway to achieve desired products, however, the traditional anode-mediated processes still face challenges of over-oxidation by the inevitably formed of hydroxyl radical (HO•). Herein, we proposed a new cathode-mediated approach for selective conversion of phenol to p-benzoquinone (p-BQ) through peroxymonosulfate (PMS) activation. A core-shell layered mesoporous spherical iron-based carbon catalyst (denoted Fe/C-MS) was rationally designed to initiate the reactions, where the first shell layer composed of mesoporous carbon provided a confined environment to enrich PMS and phenols, and the electronic configuration of encapsulated Fe species favored the formation of high-valent ion-oxo species (FeIV=O) during PMS activation. Notably, the electrochemical process with Fe/C-MS and PMS (denoted Fe/C-MS-E/PMS) achieved a high yield of p-BQ at 80.2 % and a selectivity of 93.7 % within 5 min, resulting in an ultra-low energy consumption (0.07 KWh/mol phenol). The p-BQ production rate reached an impressive value of 1002.5 %/h, 30-500 times higher than the traditional chemical and anodic oxidation methods. The applicability of this cathode-mediated process was further validated by its successful treatment of real coking wastewater, underscoring the potential as a sustainable strategy for selective conversion of phenol to desired products with high yield and low energy consumption. All the findings available in this study drive us to image that the long-neglected cathode-mediated process, if rationally designed, may serve as an attractive strategy for more sustainable resource recovery during wastewater treatment.

Constrained Heterogeneous CoFe2O4/ZnO/PMS Fenton-Like System for Industrial Wastewater Remediation with Recyclability and Zero Metal Loss

Although heterogeneous Fenton-like processes have attracted widespread attention in wastewater treatment, the mass leached active ions lead to secondary pollution and confuse the demarcation of reaction region. By constructing a constrained completely heterogeneous system and highlighting its reaction region concentrated within the slipping plane of particles, this work achieves efficient organic pollutants degradation without leaching of any free active metal components. Based on the Poisson-Boltzmann equation and electric double layer model, the specific existing of the constrained region is confirmed, and this neglected reaction region between solid interface and slipping plane in traditional heterogeneous Fenton-like reaction is clarified firstly. Due to the unique constrained property, this system demonstrates exceptional potentials application to natural water and actual industrial wastewater for its broad resistance to environmental interference. Furthermore, the alkalization aging process enables this system achieve catalyst recycle and zero metal ions emission with maintaining outstanding pollutants removing performance even in high-salt wastewater, exhibiting the superiority of the constrained completely heterogeneous system. This work demonstrated the important reaction region within slipping plane and provided a clearer boundary in heterogeneous Fenton-like system.

Optimizing 3d electronic structure of LaCoO3 based on spin state tuning for enhancing photo-Fenton activity on tetracycline degradation

The water pollution caused by the abuse of antibiotics has significant harmful effects on the environment and human health. The photo-Fenton process is currently the most effective method for removing antibiotics from water, but it encounters challenges such as inadequate response to visible light, low yield and utilization of photogenerated electrons, and slow electron transport. In this study, spin state regulation was introduced into the photo-Fenton process, and the spin state of Co3+ was regulated through Ce displacement doping. The intermediate-spin state Ce-LaCoO3 could degrade 91.6 % of tetracycline within 120 min in the photo-Fenton system, which is 15.2 % higher than that of low-spin state LaCoO3. The improved degradation effect is attributed to the reasons that Ce-LaCoO3 in the intermediate-spin state have lower band gap, better charge transfer ability, and stronger adsorption capacity of H2O2, which can accelerate the redox cycle of Co2+/Co3+ and promote the generation of ·OH. This study presents a unique strategy for synthesizing efficient photo-Fenton materials to treat antibiotic wastewater effectively.

High-entropy alloys catalyzing polymeric transformation of water pollutants with remarkably improved electron utilization efficiency

High-entropy alloy nanoparticles (HEA-NPs) exhibit favorable properties in catalytic processes, as their multi-metallic sites ensure both high intrinsic activity and atomic efficiency. However, controlled synthesis of uniform multi-metallic ensembles at the atomic level remains challenging. This study successfully loads HEA-NPs onto a nitrogen-doped carbon carrier (HEAs) and pioneers the application in peroxymonosulfate (PMS) activation to drive Fenton-like oxidation. The HEAs-PMS system achieves ultrafast pollutant removal across a wide pH range with strong resistance to real-world water interferences. Furthermore, the nonradical HEAs-PMS system selectively transforms phenolics into high-molecular-weight products via a polymerization pathway. The unique non-mineralization regime remarkably reduces PMS consumption and achieves a high electron utilization efficiency of up to 213.4%. Further DFT calculations and experimental analysis reveal that Fe and Co in HEA-NPs act as the primary catalytic sites to complex with PMS for activation, while Ni, Cu, and Pd serve as charge mediators to facilitate electron transfer. The resulting PMS* complexes on HEAs possess a high redox potential, which drives spatially separated phenol oxidation on nitrogen-doped graphene support to form phenoxyl radicals, subsequently triggering the formation of high-molecule polymeric products via polymerization reactions. This study offers engineered HEAs catalysts for water treatment with low oxidant consumption and emissions.

Bridge-oxygen bonding modulates Ru single atoms for peroxymonosulfate activation: Importance of high-valent Ru species and 1O2

The application of single-atom catalysts (SACs) to advanced oxidation processes (AOPs) based on peroxymonosulfate (PMS) has attracted considerable attention. However, the catalytic pathways and mechanisms underlying these processes remain unclear. In this study, NiFe-LDH was synthesized and single Ru atoms were stably loaded onto it by forming Ru-O-M (M=Ni or Fe) bonds (Ru@NiFe-LDH). This was demonstrated using high-angle annular dark-field scanning TEM (HAADF-STEM) and X-ray absorption fine structure spectra (XANES). The Ru@NiFe-LDH/PMS system showed a high catalytic reactivity (100 % sulfamethoxazole degradation in only 30 min), high stability (97 % reactivity was maintained after continuous operation for 400 min), and wide pH suitability (working pH range 3-11) for AOPs. The crucial roles of the high-valent species (Ru(V) = O) and 1O2 in this reaction were verified. Density functional theory (DFT) calculations revealed that electron transfer produced a positively charged Ru. This enhances the adsorption of negatively charged PMS anions onto the Ru monoatomic sites, thereby, causing the formation of Ru-PMS* complexes. This study implies that the structure-function relationship between organic compounds and SACs plays a significant role in PMS-based AOPs, and provides a comprehensive mechanism for the role of high-valent species in heterogeneous Fenton-like systems.

Comprehensive Insight into the Common Organic Radicals in Advanced Oxidation Processes for Water Decontamination

Radical-based advanced oxidation processes (AOPs) are among the most effective technologies employed to destroy organic pollutants. Compared to common inorganic radicals, such as •OH, O2•-, and SO4•-, organic radicals are widespread, and more selective, but are easily overlooked. Furthermore, a systematic understanding of the generation and contributions of organic radicals remains lacking. In this review, we systematically summarize the properties, possible generation pathways, detection methods, and contributions of organic radicals in AOPs. Notably, exploring organic radicals in AOPs is challenging due to (1) limited detection methods for generated organic radicals; (2) controversial organic radical-mediated reaction mechanisms; and (3) rapid transformation of organic radicals as reaction intermediates. In addition to their characteristics and reactivity, we examine potential scenarios of organic radical generation in AOPs, including during the peroxide activation process, in water matrices or with coexisting organic pollutants, and due to the addition of quenching agents. Subsequently, we summarize various methods for organic radical detection as reported previously, such as electron paramagnetic resonance spectroscopy (EPR), 31P nuclear magnetic resonance spectroscopy (31P NMR), liquid/gas chromatography-mass spectroscopy (GC/LC-MS), and fluorescence probes. Finally, we review the contributions of organic radicals to decontamination processes and provide recommendations for future research.

Remarkable Active Site Utilization in Edge-Hosted-N Doped Carbocatalysts for Fenton-Like Reaction

Improving the utilization of active sites in carbon catalysts is significant for various catalytic reactions, but still challenging, mainly due to the lack of strategies for controllable introduction of active dopants. Herein, a novel "Ar plasma etching-NH3 annealing" strategy is developed to regulate the position of active N sites, while maintaining the same nitrogen species and contents. Theoretical and experimental results reveal that the edge-hosted-N doped carbon nanotubes (E-N-CNT), with only 0.29 at.% N content, show great affinity to peroxymonosulfate (PMS), and exhibit excellent Fenton-like activity by generating singlet oxygen (1O2), which can reach as high as 410 times higher than the pristine CNT. The remarkable utilization of edge-hosted nitrogen atom is further verified by the edge-hosted-N enriched carbocatalyst, which shows superior capability for 4-chlorophenol degradation with a turnover frequency (TOF) value as high as 3.82 min-1, and the impressive TOF value can even surpass those of single-atom catalysts. This work proposes a controllable position regulation of active sites to improve atom utilization, which provides a new insight into the design of excellent Fenton-like catalysts with remarkable atom utilization efficiency.

Reconstructing the electron and spin structures of nanoscale iron sulfide through a biosurfactant layer towards radical-nonradical co-dominant regime

Radical-nonradical co-dominant pathways have become a hot topic in advanced oxidation, but achieving this on transition metal sulfides (TMS) remains challenging because their inherently higher electron and spin densities always induce radicals rather than nonradicals. Herein, a biosurfactant layer (BLR) was introduced to redistribute the electron and spin structure of nanoscale iron sulfide (FeS), which allowed both radical and nonradical to co-dominate the catalytic reaction. The resulting BLR-encased FeS hybrid (BLR@FeS) exhibited satisfactory removal efficiency (98.5 %) for hydrogen peroxide (H2O2) activation, outperforming both the constituent components [FeS (70.9 %) and BLR (86.2 %)]. Advanced characterizations showed that C, O, N-related sites (-CO and -NC) in BLR attracted electrons in FeS due to their strong electronegativity and electron-withdrawing capacity, which not only decreased electron density in FeS, but also resulted in a shift of the Fe/S sites from the high-spin to the medium-spin state. The reaction routes established by the BLR@FeS/H2O2 system maintained desirable stability against environmental interferences such as common inorganic anions, humic acid and changes in pH. Our study provides a state-of-the-art, molecule-level understanding of tunable co-dominant pathways and expands the targeted applications in the field of advanced oxidation.

Harnessing air-water interface to generate interfacial ROS for ultrafast environmental remediation

The air-water interface of microbubbles represents a crucial microenvironment that can dramatically accelerate reactive oxidative species (ROS) reactions. However, the dynamic nature of microbubbles presents challenges in probing ROS behaviors at the air-water interface, limiting a comprehensive understanding of their chemistry and application. Here we develop an approach to investigate the interfacial ROS via coupling microbubbles with a Fenton-like reaction. Amphiphilic single-Co-atom catalyst (Co@SCN) is employed to efficiently transport the oxidant peroxymonosulfate (PMS) from the bulk solution to the microbubble interface. This triggers an accelerated generation of interfacial sulfate radicals (SO4•-), with 20-fold higher concentration (4.48 × 10-11 M) than the bulk SO4•-. Notably, the generated SO4•- is preferentially situated at the air-water interface due to its lowest free energy and the strong hydrogen bonding interactions with H3O+. Moreover, it exhibits the highest oxidation reactivity toward gaseous pollutants like toluene, with a rate constant of 1010 M-1 s-1-over 100 times greater than bulk reactions. This work demonstrates a promising strategy to harness the air-water interface for accelerating ROS-induced reactions, highlighting the importance of interfacial ROS and its potential application.

Tailoring d-p Orbital Hybridization to Decipher the Essential Effects of Heteroatom Substitution on Redox Kinetics

The heteroatom substitution is considered as a promising strategy for boosting the redox kinetics of transition metal compounds in hybrid supercapacitors (HSCs) although the dissimilar metal identification and essential mechanism that dominate the kinetics remain unclear. It is presented that d-p orbital hybridization between the metal and electrolyte ions can be utilized as a descriptor for understanding the redox kinetics. Herein, a series of Co, Fe and Cu heteroatoms are respectively introduced into Ni3Se4 cathodes, among them, only the moderate Co-substituted Ni3Se4 can hold the optimal d-p orbital hybridization resulted from the formed more unoccupied antibonding states π*. It inevitably enhances the interfacial charge transfer and ensures the balanced OH- adsorption-desorption to accelerate the redox kinetics validated by the lowest reaction barrier (0.59 eV, matching well with the theoretical calculations). Coupling with the lower OH- diffusion energy barrier, the prepared cathode delivers ultrahigh rate capability (~68.7 % capacity retention even the current density increases by 200 times), and an assembled HSC also presents high energy/power density. This work establishes the principles for determining heteroatoms and deciphers the underlying effects of the heteroatom substitution on improving redox kinetics and the rate performance of battery-type electrodes from a novel perspective of orbital-scale manipulation.

Single Atom Catalyst in Persulfate Oxidation Reaction: From Atom Species to Substance

With maximum utilization of active metal sites, more and more researchers have reported using single atom catalysts (SACs) to activate persulfate (PS) for organic pollutants removal. In SACs, single metal atoms (Fe, Co, Cu, Mn, etc.) and different substrates (porous carbon, biochar, graphene oxide, carbon nitride, MOF, MoS2, and others) are the basic structural. Metal single atoms, substances, and connected chemical bonds all have a great influence on the electronic structures that directly affect the activation process of PS and degradation efficiency to organic pollutants. However, there are few relevant reviews about the interaction between metal single atoms and substances during PS activation process. In this review, the SACs with different metal species and substrates are summarized to investigate the metal-support interaction and evaluate their effects on PS oxidation reaction process. Furthermore, how metal atoms and substrates affect the reactive species and degradation pathways are also discussed. Finally, the challenges and prospects of SACs in PS-AOPs are proposed.

Sulfur doping-induced morphological and electronic structure modification of polyoxometalate FeWO4 for enhanced removal of organic pollutants from water

Wolframite (FeWO4), a typical polyoxometalate, serves as an auspicious candidate for heterogeneous catalysts, courtesy of its high chemical stability and electronic properties. However, the electron-deficient surface-active Fe species in FeWO4 are insufficient to cleave H2O2 via Fe redox-mediated Fenton-like catalytic reaction. Herein, we doped Sulfur (S) atom into FeWO4 catalysts to refine the electronic structure of FeWO4 for H2O2 activation and sulfamethoxazole (SMX) degradation. Furthermore, spin-state reconstruction on S-doped FeWO4 was found to effectively refine the electronic structure of Fe in the d orbital, thereby enhancing H2O2 activation. S doping also accelerated electron transfer during the conversion of sulfur species, promoting the cycling of Fe(III) to Fe(II). Consequently, S-doped FeWO4 bolstered the Fenton-like reaction by nearly two orders of magnitude compared to FeWO4. Significantly, the developed S-doped FeWO4 exhibited a remarkable removal efficiency of approximately 100% for SMX within 40 min in real water samples. This underscores its extensive pH adaptability, robust catalytic stability, and leaching resistance. The matrix effects of water constituents on the performance of S-doped FeWO4 were also investigated, and the results showed that a certain amount of Cl-, SO42-, NO3-, HCO3- and PO43- exhibited negligible effects on the degradation of SMX. Theoretical calculations corroborate that the distinctive spin-state reconstruction of Fe center in S-doped FeWO4 is advantageous for H2O2 decomposition. This discovery offers novel mechanistic insight into the enhanced catalytic activity of S doping in Fenton-like reactions and paves the way for expanding the application of FeWO4 in wastewater treatment.

Electronic Spin Alignment within Homologous NiS2/NiSe2 Heterostructures to Promote Sulfur Redox Kinetics in Lithium-Sulfur Batteries

The catalytic activation of the Li-S reaction is fundamental to maximize the capacity and stability of Li-S batteries (LSBs). Current research on Li-S catalysts mainly focuses on optimizing the energy levels to promote adsorption and catalytic conversion, while frequently overlooking the electronic spin state influence on charge transfer and orbital interactions. Here, hollow NiS2/NiSe2 heterostructures encapsulated in a nitrogen-doped carbon matrix (NiS2/NiSe2@NC) are synthesized and used as a catalytic additive in sulfur cathodes. The NiS2/NiSe2 heterostructure promotes the spin splitting of the 3d orbital, driving the Ni3+ transformation from low to high spin. This high spin configuration raises the electronic energy level and activates the electronic state. This accelerates the charge transfer and optimizes the adsorption energy, lowering the reaction energy barrier of the polysulfides conversion. Benefiting from these characteristics, LSBs based on NiS2/NiSe2@NC/S cathodes exhibit high initial capacity (1458 mAh·g⁻1 at 0.1C), excellent rate capability (572 mAh·g⁻1 at 5C), and stable cycling with an average capacity decay rate of only 0.025% per cycle at 1C during 500 cycles. Even at high sulfur loadings (6.2 mg·cm⁻2), high initial capacities of 1173 mAh·g⁻1 (7.27 mAh·cm⁻2) are measured at 0.1C, and 1058 mAh·g⁻1 is retained after 300 cycles.

How hetero-single-atom dispersion reconstructed electronic structure of carbon materials and regulated Fenton-like oxidation pathways

Single-atom catalysts (SACs) have emerged as competitive candidates for Fenton-like oxidation of micro-pollutants in water. However, the impact of metal insertion on the intrinsic catalytic activity of carrier materials has been commonly overlooked, and the environmental risk due to metal leaching still requires attention. In contrast to previous reports, where metal sites were conventionally considered as catalytic centers, our study investigates, for the first time, the crucial catalytic role of the carbon carrier modulated through hetero-single-atom dispersion and the regulation of Fenton-like oxidation pathways. The inherent differences in electronic properties between Fe and Co can effectively trigger long-range electron rearrangement in the sp2-carbon-conjugated structure, creating more electron-rich regions for peroxymonosulfate (PMS) complexation and initiating the electron transfer process (ETP) for pollutant degradation, which imparts the synthesized catalyst (FeCo-NCB) with exceptional catalytic efficiency despite its relatively low metal content. Moreover, the FeCo-NCB/PMS system exhibits enduring decontamination efficiency in complex water matrices, satisfactory catalytic stability, and low metal leaching, signifying promising practical applications. More impressively, the spatial relationship between metal sites and electron density clouds is revealed to determine whether high-valent metal-oxo species (HVMO) are involved during the decomposition of surface complexes. Unlike single-type single-atom dispersion, where metal sites are situated within electron-rich regions, hetero-single-atom dispersion can cause the deviation of electron density clouds from the metal sites, thus hindering the in-situ oxidation of metal within the complexes and minimizing the contribution of HVMO. These findings provide new insights into the development of carbon-based SACs and advance the understanding of nonradical mechanisms underpinning Fenton-like treatments.

Advances in Atomically Dispersed Metal and Nitrogen Co-Doped Carbon Catalysts for Advanced Oxidation Technologies and Water Remediation: From Microenvironment Modulation to Non-Radical Mechanisms

Atomically dispersed metal and nitrogen co-doped carbon catalysts (M-N-C) have been attracting tremendous attentions thanks to their unique MNx active sites and fantastic catalytic activities in advanced oxidation technologies (AOTs) for water remediation. However, precisely tailoring the microenvironment of active sites at atomic level is still an intricate challenge so far, and understanding of the non-radical mechanisms in persulfate activation exists many uncertainties. In this review, latest developments on the microenvironment modulation strategies of atomically dispersed M-N-C catalysts including regulation of central metal atoms, regulation of coordination numbers, regulation of coordination heteroatoms, and synergy between single-atom catalysts (SACs) with metal species are systematically highlighted and discussed. Afterwards, progress and underlying limitations about the typical non-radical pathways from production of singlet oxygen, electron transfer mechanism to generation of high-valent metal species are well demonstrated to inspire intrinsic insights about the mechanisms of M-N-C/persulfate systems. Lastly, perspectives for the remaining challenges and opportunities about the further development of carbon-based SACs in environment remediation are also pointed out. It is believed that this review will be much valuable for the further design of active sites in M-N-C/persulfate catalytic systems and promote the wide application of SACs in various fields.

Strontium doped Fe-based porous carbon for highly efficient electrocatalytic ORR and MOR reactions

The catalytic activity improvement of Fe-based active sites derived from metal organic frameworks toward oxygen reduction reaction (ORR) and methanol oxidation reaction (MOR) remains a major challenge. In this study, the growth of strontium decorated 2-methylimidazole zinc salt (Sr/ZIF-8) is prepared as a carrier to vapor deposited iron formation Sr doped Fe-based nitrogen-doped carbon framework (named as Sr/FeNC). After high-temperature pyrolysis and vapor deposition, strontium carbonate nanocrystals are evenly dispersed on the shrunk dodecahedron carbon frame and multitudinous Fe-based active catalytic sites are embedded in carbon skeleton. The optimal Sr/FeNC-2 catalyst demonstrates the outstanding ORR performance in terms of a half-wave potential of 0.851 V and an onset potential of 0.90 V, while Sr/FeNC-2 exhibits a high current density of 18.2 mA cm-2 and a lower Tafel slope of 21 mV dec-1 in MOR. The exceptional catalytic activity could be ascribed to the synergistic coupling effect of strontium compounds with Fe-based catalytic sites (Fe-Nx, Fe, and iron oxide). In particular, the formation of SrCO3 affects the bonding configuration of the iron species sites, leading to an optimization of the electronic structure within the multihole carbon matrix. The synthetic approach presents a prospective strategy for future endeavors in developing innovative and advanced bifunctional catalysts for ORR and MOR.

Transformative Removal of Aqueous Micropollutants into Polymeric Products by Advanced Oxidation Processes

This perspective presents the latest advancements in selective polymerization pathways in advanced oxidation processes (AOPs) for removal of featured organic pollutants in wastewater. In radical-based homogeneous reactions, SO4• --based systems exhibit superior oxidative activity toward aromatics with electron-donating substituents via single electron transfer and radical adduct formation (RAF). The produced organic radical cations subsequently undergo coupling and polymerization reactions to produce polymers. For •OH-based oxidation, metal ions facilitate the production of monomer radicals via RAF. Additionally, heterogeneous catalysts can mediate both coupling and polymerization reactions via persulfate activation without generating inorganic radicals. Metal-based catalysts will mediate a direct oxidation pathway toward polymerization. In contrast, carbon-based catalysts will induce coupling reactions to produce low-molecular-weight oligomers (≤4 units) via an electron transfer process. In comparison to mineralization, polymerization pathways remarkably reduce peroxide usage, quickly separate pollutants from the aqueous phase, and generate polymeric byproducts. Thus, AOP-driven polymerization systems hold significant promise in reducing carbon emission and realizing carbon recycling in water treatment processes.

Regulating electronic structure of Fe single-atom site by S/N dual-coordination for efficient Fenton-like catalysis

The activity of single-atom catalysts in peroxymonosulfate activation process is bound up with the local electronic state of metal center. However, the large electronegativity of N atoms in Metal-N4 restricts the electron transfer between center metal atom and peroxymonosulfate. Herein, we constructed Fe-SN-C catalyst by incorporating S atom in the first coordination sphere of Fe single-atom site (Fe-S1N3) for Fenton-like catalysis. The Fe-SN-C with a low valent Fe is found to exhibit excellent catalytic activity for bisphenol A degradation, and the corresponding rate constant reaches 0.405 min-1, 11.9-fold higher than the original Fe-N-C. Besides, the Fe-SN-C/PMS system exhibits ideal catalytic stability under the effect of wide pH range and background substrates by the fast generation of high-valent Fe species. Experimental results and theoretical calculations reveal that the dual coordination of S and N atoms notably increases the local electron density of Fe atoms and electron filling in eg orbital, causing a d band center shifting close to the fermi level and thereby optimizes the activation energy for peroxymonosulfate decomposition via Fe 3d-O 2p orbital interaction. This work provides further development of promising SACs for the efficient activation of peroxymonosulfate based on direct regulation of the coordination environment of active center metal atoms.

Selective electrophilic attack towards organic micropollutants with superior Fenton-like activity by biochar-supported cobalt single-atom catalyst

The global shortage of freshwater and inadequate supply of clean water have necessitated the implementation of robust technologies for wastewater purification, and Fenton-like chemistry is a highly-promising approach. However, realizing the rapid Fenton-like chemistry for high-efficiency degradation of organic micropollutants (OMs) remains challenging. Herein, one novel system was constructed by a Co single-atom catalyst activating peroxymonosulfate (PMS), and the optimal system (SA-Co-NBC-0.2/PMS) achieved unprecedented catalytic performance towards a model OM [Iohexol (IOH)], i.e., almost 100% decay ratio in only 10 min (the observed rate constant: 0.444 min-1) with high electrophilic species 1O2 (singlet oxygen) generation. Theoretical calculations unveiled that Co-N4 sites preferred to adsorb the terminal-O of PMS (more negative adsorption energy than other O sites: -32.67 kcal/mol), promoting the oxidation of PMS to generate 1O2. Iodine (I)23 (0.1097), I24 (0.1154) and I25 (0.0898) on IOH with higher f- electrophilic values were thus identified as the main attack sites. Furthermore, 16S ribosomal RNA high-throughput sequencing and quantitative structure-activity relationship analysis illustrated the environmentally-benign property of the SA-Co-NBC-0.2 and the tapering ecological risk during IOH degradation process. Significantly, this work comprehensively checked the competence of the SA-Co-NBC-0.2/PMS system for organics abatement in practical wastewater.

Atomically dispersed dual-atom catalysts: A new rising star in environmental remediation

Single-atom catalysts, characterized by individual metal atoms as active centers, have emerged as promising candidates owing to their remarkable catalytic efficiency, maximum atomic utilization efficiency, and robust stability. However, the limitation of single-atom catalysts lies in their inability to cater to multistep reactions using a solitary active site. Introducing an additional metal atom can amplify the number of active sites, modulate the electronic structure, bolster adsorption ability, and enable a gamut of core reactions, thus augmenting their catalytic prowess. As such, dual-atom catalysts have risen to prominence. However, a comprehensive review elucidating the realm of dual-atom catalysts in environmental remediation is currently lacking. This review endeavors to bridge this gap, starting with a discourse on immobilization techniques for dual-atom catalysts, which includes configurations such as adjacent atoms, bridged atoms, and co-facially separated atoms. The review then delves into the intrinsic activity mechanisms of these catalysts, elucidating aspects like adsorption dynamics, electronic regulation, and synergistic effects. Following this, a comprehensive summarization of dual-atom catalysts for environmental applications is provided, spanning electrocatalysis, photocatalysis, and Fenton-like reactions. Finally, the existing challenges and opportunities in the field of dual-atom catalysts are extensively discussed. This work aims to be a beacon, illuminating the path towards the evolution and adoption of dual-atom catalysts in environmental remediation.

Iron 3D-Orbital Configuration Dependent Electron Transfer for Efficient Fenton-Like Catalysis

Transition metals are excellent active sites to activate peroxymonosulfate (PMS) for water treatment, but the favorable electronic structures governing  reaction mechanism still remain elusive. Herein, the authors construct typical d-orbital configurations on iron octahedral (FeOh ) and tetrahedral (FeTd ) sites in spinel ZnFe2 O4 and FeAl2 O4 , respectively. ZnFe2 O4 (136.58 min-1 F-1 cm2 ) presented higher specific activity than FeAl2 O4 (97.47 min-1 F-1 cm2 ) for tetracycline removal by PMS activation. Considering orbital features of charge amount, spin state, and orbital arrangement by magnetic spectroscopic analysis, ZnFe2 O4 has a larger bond order to decompose PMS. Using this descriptor, high-spin FeOh is assumed to activate PMS mainly to produce nonradical reactive oxygen species (ROS) while high-spin FeTd prefers to induce radical species. This hypothesis is confirmed by the selective predominant ROS of 1 O2 on ZnFe2 O4 and O2 •- on FeAl2 O4 via quenching experiments. Electrochemical determinations reveal that FeOh has superior capability than FeTd for feasible valence transformation of iron cations and fast interfacial electron transfer. DFT calculations further suggest octahedral d-orbital configuration of ZnFe2 O4 is beneficial to enhancing Fe-O covalence for electron exchange. This work attempts to understand the d-orbital configuration-dependent PMS activation to design efficient catalysts.

Regulating the Spin State Configuration in Bimetallic Phosphorus Trisulfides for Promoting Sulfur Redox Kinetics

Lithium-sulfur (Li-S) batteries suffer from sluggish kinetics due to the poor conductivity of sulfur cathodes and polysulfide shutting. Current studies on sulfur redox catalysis mainly focus on the adsorption and catalytic conversion of lithium polysulfides but ignore the modulation of the electronic structure of the catalysts which involves spin-related charge transfer and orbital interactions. In this work, bimetallic phosphorus trisulfides embedded in Prussian blue analogue-derived nitrogen-doped hollow carbon nanocubes (FeCoPS3/NCs) were elaborately synthesized as a host to reveal the relationship between the catalytic activity and the spin state configuration for Li-S batteries. Orbital spin splitting in FeCoPS3 drives the electronic structure transition from low-spin to high-spin states, generating more unpaired electrons on the 3d orbit. Specifically, the nondegenerate orbitals involved in the high-spin configuration of FeCoPS3 result in the upshift of energy levels, generating more active electronic states. Such tailored electronic structure increases the charge transfer, influences the d-band center, and further modifies the adsorption energy with lithium polysulfides and the potential reaction pathways. Consequently, the cell with FeCoPS3/NC host exhibits an ultralow capacity decay of 0.037% per cycle over 1000 cycles. This study proposed a general strategy for sculpting geometric configurations to enable spin and orbital topology regulation in Li-S battery catalysts.

Spin state-dependent in-situ photo-Fenton-like transformation from oxygen molecule towards singlet oxygen for selective water decontamination

The development of 1O2-dominanted selective decontamination for water purification was hampered by extra H2O2 consumption and poor 1O2 generation. Herein, we proposed the reconstruction of Fe spin state using near-range N atom and long-range N vacancies to enable efficient generation of H2O2 and sequential activation of H2O2 into 1O2 after visible-light irradiation. Theoretical and experimental results revealed that medium-spin Fe(III) strengthened O2 adsorption, penetrated eg electrons to antibonding p-orbital of oxygen, and lowered the free energy of O2 activation, enabling the oxygen protonation for H2O2 generation. Thereafter, the electrons of H2O2 could be extracted by low-spin Fe(III) and rapidly converted into 1O2 in a nonradical path. The developed 1O2-dominated in-situ photo-Fenton-like system had an excellent pH universality and anti-interference to inorganic ions, dissolved organic matter, and even real water matrixes (e.g., tap water and secondary effluent). This work provided a novel insight for sustainable and efficient 1O2 generation, which motivated the development of new-generation selective water treatment technology.

Facilely Tuning the First-Shell Coordination Microenvironment in Iron Single-Atom for Fenton-like Chemistry toward Highly Efficient Wastewater Purification

Precisely identifying the atomic structures in single-atom sites and establishing authentic structure-activity relationships for single-atom catalyst (SAC) coordination are significant challenges. Here, theoretical calculations first predicted the underlying catalytic activity of Fe-NxC4-x sites with diverse first-shell coordination environments. Substituting N with C to coordinate with the central Fe atom induces an inferior Fenton-like catalytic efficiency. Then, Fe-SACs carrying three configurations (Fe-N2C2, Fe-N3C1, and Fe-N4) fabricate facilely and demonstrate that optimized coordination environments of Fe-NxC4-x significantly promote the Fenton-like catalytic activity. Specifically, the reaction rate constant increases from 0.064 to 0.318 min-1 as the coordination number of Fe-N increases from 2 to 4, slightly influencing the nonradical reaction mechanism dominated by 1O2. In-depth theoretical calculations unveil that the modulated coordination environments of Fe-SACs from Fe-N2C2 to Fe-N4 optimize the d-band electronic structures and regulate the binding strength of peroxymonosulfate on Fe-NxC4-x sites, resulting in a reduced energy barrier and enhanced Fenton-like catalytic activity. The catalytic stability and the actual hospital sewage treatment capacity also showed strong coordination dependency. This strategy of local coordination engineering offers a vivid example of modulating SACs with well-regulated coordination environments, ultimately maximizing their catalytic efficiency.

Diatomic catalysts for Fenton and Fenton-like reactions: a promising platform for designing/regulating reaction pathways

The optimization of the single-atom catalyst (SAC) performance has been the hot spot for years. It is widely acknowledged that the incorporation of adjacent single-atom sites (diatomic catalysts (DACs)) can enable synergistic effects, which can be used in cascade catalysis, dual-function catalysis, and performance regulation of intrinsic active sites. DACs have been widely applied in the CO₂ reduction reaction (CO₂RR), oxygen reduction reaction (ORR), hydrogen evolution reaction (HER), etc.; however, their application is limited in Fenton or Fenton-like reactions. This perspective summarizes the most advanced achievements in this field, followed by the proposed opportunities in further research, including regulation of the magnetic moment, inter-atomic distance effect, strain engineering, atomic cluster (AC)/nanoparticle (NP) modification, etc. It is demonstrated that this perspective can contribute to the DAC application in Fenton or Fenton-like reactions with innovative design and mechanisms being put forward.