Mass Flow and Metabolic Pathway of Nonaeration Greywater Treatment in an Oxygenic Microalgal-Bacterial Biofilm

Enhancing mixed-species microalgal biofilms for wastewater treatment: Design, construction, evaluation and optimisation

Biofilm-based cultivation of microalgae is a powerful method for wastewater treatment with low harvesting costs, water and energy consumption. This article provides a detailed summary of the design, construction, evaluation, and optimisation (DCEO) of mixed-species biofilms including algal and bacteria, and discusses their relevant applications in the treatment of industrial and agricultural wastewater and new pollutants. Finally, it presents the problems faced by mixed-species microalgal biofilms, along with solutions. DCEO is a typical synthetic biology concept, in which design and construction are bottom-up, and evaluation and optimisation are top-down approaches. Detailed knowledge of the metabolic pathways and the regulation of microalgae and other microorganisms is helpful for designing mixed-species biofilms. Three dimensional bioprinting is a powerful tool for constructing structured biofilms. Further analysis after evaluation is beneficial to optimise such biofilms. This review provides a new insight into using DCEO to enhance mixed-species biofilms for wastewater treatment.

Closed fixed-bed bacteria-algae biofilm reactor: A promising solution for phenol containing wastewater treatment and resource transformation

This study focuses on treating phenolic wastewater with a novel closed fixed-bed bacteria-algae biofilm reactor (CF-BABR) to enhance resource transformation for phenolic substances. The CF-BABR showed strong impact - load resistance and stable degradation efficiency, fully degrading phenolic compounds at concentrations from 0 to 150 mg/L. From the inflow to the outflow, the effective sequences, abundance, and diversity of bacteria decreased. Chlorobaculum was the dominant bacterium for phenolic pollutant degradation. The abundance of fungi decreased gradually, while their diversity increased. Kalenjinia and Cutaneotrichosporon played a synergistic role in reducing pollutant toxicity. The high - concentration pollutants at the influent led to a higher abundance of microalgal communities, and Scenedesmaceae became the most dominant algal family, which was positively correlated with the degradation of phenolic compounds. Functional gene prediction indicated that the abundance of functional genes in bacteria decreased overall along the wastewater flow. Carbohydrate metabolism and amino acid metabolism were the most active secondary pathways. In fungi, the predicted gene functions had the highest abundance in the upstream region. Metabolic intermediates such as organic acids and derivatives, lipids and lipid - like molecules, and carboxylic acids and derivatives demonstrated the degradation effect of CF-BABR on phenolic compounds.

Effects of stratified microbial extracellular polymeric substances on microalgae dominant biofilm formation and nutrients turnover under batch and semi-continuous operation

Extracellular polymeric substances (EPS) are well-acknowledged to accelerate microalgal biofilm formation, yet specific role of stratified EPS is unknown. Bacterial biofilm stratified EPS could enrich phosphorus, whether microalgal biofilm stratified EPS could also realize phosphorus or nitrogen enrichment remains unclarified. This study investigated microalgae dominant biofilm growth characteristics and nutrients removal via inoculating microalgae and stratified bacterial EPS at various microalgae:bacteria ratios. Soluble-EPS favored biofilm establishment and chlorophyll synthesis, while loosely-bound (LB-EPS) and tightly-bound EPS (TB-EPS) improved phosphorus removal, and optimum microalgae:bacteria cell count ratio was 1:0.5. Under semi-continuous operation, stable and efficient nutrients removal was observed at hydraulic retention time (HRT) of 2 days. Both nitrogen and phosphorus enrichment by TB-EPS over LB-EPS (respectively up to 7.9 and 23.8 times) were innovatively discovered, with enhanced nutrients turnover efficiency at higher HRTs. This study provided direct evidences regarding the role of stratified EPS on microalgal biofilm development and nutrients turnover.

Intensified microalgae production and development of microbial communities on suspended carriers and municipal wastewater

Wastewater represents an alternative source of nutrients in which to grow microalgae, whilst improving the quality of the wastewater, and reducing the downstream treatment required. However, commercialisation of microalgal cultures for such duties faces a number of challenges, predominantly high cost and low productivity. Suspended-solid reactors (ssPBR) can reduce the operational costs, while promoting attached and suspended microalgae growth. In the present study, a novel approach was developed by integrating microalgal wastewater treatment with carrier systems to favour the growth of both attached and suspended cells of T. obliquus. This study found that T. obliquus was able to uptake nutrients from municipal wastewater, achieving removals of 99.3-99.9 % NH3-N, 54.5-88.5 % PO43- and 92.8-94.5 % DTC. The addition of a 12.5 % volumetric fill ratio of carriers in ssPBRs produced higher microalgal cell productivity (1.2·106 ± 2.5·105 cell ml-1 d-1) than the control (4.3·105 ± 2.8·105 cell ml-1 d-1). MinION nanopore sequencing was conducted to assess the impact of microalgal and carrier treatment on wastewater bacterial communities. It was found not only that bacterial communities had changed after the treatment but also the ones attached differed from the ones suspended. Untreated wastewater was characterised by the abundance of sewer bacteria genera such as Aliarcobacter and Arcobacter, whilst, after treatment, microbial communities were characterised by the presence of photosynthetic freshwater (Limnococcus, Stanieria) and bioremediation-like bacteria genera (Pseudomonas, Rheinheimera). In conclusion, the addition of 12.5 % fill carrier ratio increased microalgal productivity, while stimulating changes in the algal microbiome, and creating distinctly different populations in the free and attached environments.

Microalgal extracellular polymeric substances (EPS) and their roles in cultivation, biomass harvesting, and bioproducts extraction

Microalgae extracellular polymeric substances (EPS) are complex high-molecular-weight polymers and the physicochemical properties of EPS strongly affect the core features of microalgae cultivation and resource utilization. Revealing the key roles of EPS in microalgae life-cycle processes in an interesting and novelty topic to achieve energy-efficient practical application of microalgae. This review found that EPS showed positive effect in non-gas uptake, extracellular electron transfer, toxicity resistance and heterotrophic symbiosis, but negative impact in gas transfer and light utilization during microalgae cultivation. For biomass harvesting, EPS favored biomass flocculation and large-size cell self-flocculation, but unfavored small size microalgae self-flocculation, membrane filtration, charge neutralization and biomass dewatering. During bioproducts extraction, EPS exhibited positive impact in extractant uptake, but the opposite effect in cellular membrane permeability and cell rupture. Future research on microalgal EPS were also identified, which offer suggestions for comprehensive understanding of microalgal EPS roles in various scenarios.

Differentiation and quantification of extracellular polymeric substances from microalgae and bacteria in the mixed culture

Extracellular polymeric substances (EPS) play significant roles in the formation, function, and interactions of microalgal-bacteria consortia. Understanding the key roles of EPS depends on reliable extraction and quantification methods, but differentiating of EPS from microalgae versus bacteria is challenging. In this work, cation exchange resin (CER) and thermal treatments were applied for total EPS extraction from microalgal-bacteria mixed culture (MBMC), flow cytometry combined with SYTOX Green staining was applied to evaluate cell disruption during EPS extraction, and auto-fluorescence-based cell sorting (AFCS) was used to separate microalgae and bacteria in the MBMC. Thermal extraction achieved much higher EPS yield than CER, but higher temperature and longer time reduced cell activity and disrupted the cells. The highest EPS yield with minimal loss of cell activity and cell disruption was achieved using thermal extraction at 55℃ for 30 min, and this protocol gave good results for MBMC with different microalgae:bacteria (M:B) mass ratios. AFCS combined with thermal treatment achieved the most-efficient biomass differentiation and low EPS loss (<4.5 %) for the entire range of M:B ratios. EPS concentrations in bacteria were larger than in microalgae: 42.8 ± 0.4 mg COD/g TSS versus 9.19 ± 0.38 mg COD/g TSS. These findings document sensitive and accurate methods to extract and quantify EPS from microalgal-bacteria aggregates.