Effects of Natural Organic Matter Properties on the Dissolution Kinetics of Zinc Oxide Nanoparticles

Effects of dissolved organic matter on the environmental behavior and toxicity of metal nanomaterials: A review

Metal nanomaterials (MNMs) have been released into the environment during their usage in various products, and their environmental behaviors directly impact their toxicity. Numerous environmental factors potentially affect the behaviors and toxicity of MNMs with dissolved organic matter (DOM) playing the most essential role. Abundant facts showing contradictory results about the effects of DOM on MNMs, herein the occurrence of DOM on the environmental process change of MNMs such as dissolution, dispersion, aggregation, and surface transformation were summarized. We also reviewed the effects of MNMs on organisms and their mechanisms in the environment such as acute toxicity, oxidative stress, oxidative damage, growth inhibition, photosynthesis, reproductive toxicity, and malformation. The presence of DOM had the potential to reduce or enhance the toxicity of MNMs by altering the reactive oxygen species (ROS) generation, dissolution, stability, and electrostatic repulsion of MNMs. Furthermore, we summarized the factors that affected different toxicity including specific organisms, DOM concentration, DOM types, light conditions, detection time, and production methods of MNMs. However, the more detailed mechanism of interaction between DOM and MNMs needs further investigation.

Fulvic acid modified ZnO nanoparticles improve nanoparticle stability, mung bean growth, grain zinc content, and soil biodiversity

Zinc oxide nanoparticles (ZnO NPs) have emerged as a novel solution to combat Zn deficiency in agriculture. However, challenges persist regarding their Zn utilization efficiency and environmental impact. Fulvic acid (FA), as a relatively mature modified material, is a promising candidate to enhance the environmental stability of ZnO NPs. This study investigates modifying ZnO NPs with FA to improve their stability and increase Zn content in mung bean fruit and explores their effect on plants and the soil ecosystem. We combined FA and ZnO NPs (FZ-50) at mass ratios of 1: 5, 1: 2, and 4: 5, denoted as 20 % FZ, 50 % FZ, and 80 % FZ, respectively. Initial germination tests revealed that the 50 % FZ treatment improved sprout growth and Zn content and minimized agglomeration the most. A subsequent pot experiment compared FZ-50 with ZnO, ZnO NPs, and F + Z (1: 1 FA: ZnO NPs). Notably, the FZ-50 treatment (50 % FZ applied to the soil) demonstrated superior results, exhibiting a 30.25 % increase in yield, 121 % improvement in root nodule quality, and 56.38 % increase in Zn content, with no significant changes in enzyme activities (catalase and peroxidase). Furthermore, FZ-50 increased soil available Zn content and promoted soil microorganism diversity, outperforming ZnO and ZnO NPs. This study underscores the potential of FA as a relatively mature material for modifying ZnO NPs to increase grain Zn content, presenting a novel approach to addressing Zn deficiency in agriculture.

Dissolution kinetics of copper oxide nanoparticles in presence of glyphosate

Recently CuO nanoparticles (n-CuO) have been proposed as an alternative method to deliver a Cu-based pesticide for controlling fungal infestations. With the concomitant use of glyphosate as an herbicide, the interactions between n-CuO and this strong ligand need to be assessed. We investigated the dissolution kinetics of n-CuO and bulk-CuO (b-CuO) particles in the presence of a commercial glyphosate product and compared it to oxalate, a natural ligand present in soil water. We performed experiments at concentration levels representative of the conditions under which n-CuO and glyphosate would be used (∼0.9 mg/L n-CuO and 50 μM of glyphosate). As tenorite (CuO) dissolution kinetics are known to be surface controlled, we determined that at pH 6.5, T ∼ 20 °C, using KNO3 as background electrolyte, the presence of glyphosate leads to a dissolution rate of 9.3 ± 0.7 ×10-3 h-1. In contrast, in absence of glyphosate, and under the same conditions, it is 2 orders of magnitude less: 8.9 ± 3.6 ×10-5 h-1. In a more complex multi-electrolyte aqueous solution the same effect is observed; glyphosate promotes the dissolution rates of n-CuO and b-CuO within the first 10 h of reaction by a factor of ∼2 to ∼15. In the simple KNO3 electrolyte, oxalate leads to dissolution rates of CuO about two times faster than glyphosate. However, the kinetic rates within the first 10 h of reaction are about the same for the two ligands when the reaction takes place in the multi-electrolyte solution as oxalate is mostly bound to Ca2+ and Mg2+.

Phototransformation of phosphite induced by zinc oxide nanoparticles (ZnO NPs) in aquatic environments

Phosphite, an essential component in the biogeochemical phosphorus cycle, may make significant contributions to the bioavailable phosphorus pool as well as water eutrophication. However, to date, the potential impacts of coexisting photochemically active substances on the environmental fate and transformation of phosphite in aquatic environments have been sparsely elucidated. In the present study, the effect of zinc oxide nanoparticles (ZnO NPs), a widely distributed photocatalyst in aquatic environments, on phosphite phototransformation under simulated solar irradiation was systematically investigated. The physicochemical characteristics of the pristine and reacted ZnO NPs were thoroughly characterized. The results showed that the presence of ZnO NPs induced the indirect phototransformation of phosphite to phosphate, and the reaction rate increased with increasing ZnO NPs concentration. Through experiments with quenching and trapping free radicals, it was proved that photogenerated reactive oxygen species (ROS), such as hydroxyl radical (•OH), superoxide anion (O2•-), and singlet oxygen (1O2), made substantial contributions to phosphite phototransformation. In addition, the influencing factors such as initial phosphite concentration, pH, water matrixes (Cl-, F-, Br-, SO42-, NO3-, NO2-, HCO3-, humic acid (HA) and citric acid (CA)) were investigated. The component of generated precipitates after the phosphite phototransformation induced by ZnO NPs was still dominated by ZnO NPs, while the presence of amorphous Zn3(PO4)2 was identified. This work explored ZnO NPs-mediated phosphite phototransformation processes, indicating that nanophotocatalysts released into aquatic environments such as ZnO NPs may function as photosensitizers to play a beneficial role in the transformation of phosphite to phosphate, thereby potentially mitigating the toxicity of phosphite to aquatic organisms while exacerbating eutrophication. The findings of this study provide a novel insight into the comprehensive assessment of the environmental fate, potential ecological risk, and biogeochemical behaviors of phosphite in natural aquatic environments under the condition of combined pollution.

Toward Understanding the Environmental Risks of Combined Microplastics/Nanomaterials Exposures: Unveiling ZnO Transformations after Adsorption onto Polystyrene Microplastics in Environmental Solutions

Over recent decades, there has been a dramatic increase in the manufacture of engineered nanomaterials, which has inevitably led to their environmental release. Zinc oxide (ZnO) is among the more abundant nanomaterial manufactured due to its advantageous properties, used for piezoelectric, semiconducting, and antibacterial purposes. Plastic waste is ubiquitous and may break down or delaminate into smaller microplastics, leaving open the question of whether these small polymers may alter the fate of ZnO through adsorption within aquatic media (tap-water and seawater). Here, scanning electron microscopy analysis confirms the effective Zn nano/microstructures adsorption onto polystyrene surfaces after only 24-h incubation in the aquatic media. After pre-aging the nanomaterials for 7-days in different environmental media, nanoprobe X-ray absorption near-edge spectroscopy analysis reveals significant ZnO transformation toward Zn-sulfide and Zn-phosphate. The interaction between a commercial ZnO-based sunscreen with polystyrene and a cleanser consumer containing microbeads with ZnO nanomaterials is also studied, revealing the adsorption of transformed Zn-species in the microplastics surfaces, highlighting the environmental relevancy of this work. Understanding the structural and functional impacts of the microplastics/ZnO complexes, and how they evolve, will provide insights into their chemical nature, stability, transformations, and fate, which is key to predicting their bioreactivity in the environment.

Transformation of zinc oxide nanoparticles in the presence of aluminum oxide with pre-sorbed phosphorus ligands

Naturally occurring oxides could react with zinc oxide (ZnO) nanoparticles (NPs) and then change its transformation and toxicity to ecological receptors. The reaction may be affected by a variety of environmental factors, yet the relevant processes and mechanisms are limitedly investigated. Natural prevalent ligands, as an important factor, can sorb on natural oxide minerals and change its surface property, finally affecting ZnO NP transformation. This study investigated the interactions of ZnO NPs with phosphorus ligands (i.e., phytate and orthophosphate) pre-sorbed γ-alumina (γ-Al₂O₃) via batch experiments and multi-technique analyses. A limited amount of aqueous Zn²⁺ is observed when the concentration of ZnO NPs is relatively low (<64.8 mg L^-1) in the presence of phytate pre-sorbed γ-Al₂O₃. Solid Zn(II) species includes binary/ternary surface Zn(II) complexes on γ-Al₂O₃ with minor amounts of zinc phytate precipitates. As the concentration of ZnO NPs increases, surface Zn(II) complexes gradually transform into zinc phytate and Zn-Al layered double hydroxide (Zn-Al LDH) precipitates. The quantitative analysis indicates that, as the concentration of ZnO NPs increases from 32.4 to 388.8 mg L^-1, the proportion of Zn(II) species as binary/ternary surface complexes decreases from 81.9 to 30.2%; and the proportion as zinc phytate and Zn-Al LDH increases from 17.9 to 27.6% and 0 to 43.8%, respectively. The pre-sorption of orthophosphate can also inhibit ZnO NP transformation into Zn-Al LDH precipitates on γ-Al₂O₃. This study suggests that natural ligands pre-existed on natural oxide minerals could greatly influence the solubility, stability, transformation, and fate of easily dissoluble metal oxides (e.g., ZnO) in the environments.

Recent advances in green synthesized nanoparticles for bactericidal and wound healing applications

Nanotechnology has become an exciting area of research in diverse fields, such as: healthcare, food, agriculture, cosmetics, paints, lubricants, fuel additives and other fields. This review is a novel effort to update the practioneers about the most current developments in the widespread use of green synthesized nanoparticles in medicine. Biosynthesis is widely preferred among different modes of nanoparticle synthesis since they do not require toxic chemical usage and they are environment-friendly. In the green bioprocess, plant, algal, fungal and cyanobacterial extract solutions have been utilized as nucleation/capping agents to develop effective nanomaterials for advanced medical applications. Several metal salts, such as silver, zinc, titanium and other inorganic salts, were utilized to fabricate innovative nanoparticles for healthcare applications. Irrespective of the type of wound, infection in the wound area is a widespread problem. Micro-organisms, the prime reason for wound complications, are gradually gaining resistance against the commonly used antimicrobial drugs. This necessitates the need to generate nanoparticles with efficient antimicrobial potential to keep the pathogenic microbes under control. These nanoparticles can be topically applied as an ointment and also be used by incorporating them into hydrogels, sponges or electrospun nanofibers. The main aim of this review is to highlight the recent advances in the Ag, ZnO and TiO₂ nanoparticles with possible wound healing applications, coupled with the bactericidal ability of a green synthesis process.

Recyclable Carbon Cloth-Supported ZnO@Ag3PO4 Core-Shell Structure for Photocatalytic Degradation of Organic Dye

The extensive use of organic dyes in industry has caused serious environmental problems, and photocatalysis is a potential solution to water pollution by organic dyes. The practical application of powdery photocatalysts is usually limited by the rapid recombination of charge carriers and difficulty in recycling. In this study, recyclable carbon cloth-supported ZnO@Ag₃PO₄ composite with a core-shell structure was successfully prepared by solvothermal treatment and subsequent impregnation-deposition. The as-prepared carbon cloth-supported ZnO@Ag₃PO₄ composite showed an improved photocatalytic activity and stability for the degradation of rhodamine B (RhB), a model organic dye, under visible light irradiation. The decomposition ratio of RhB reached 87.1% after exposure to visible light for 100 min, corresponding to a reaction rate constant that was 4.8 and 15.9 times that of carbon cloth-supported Ag₃PO₄ or ZnO alone. The enhanced performance of the composite can be attributed to the effectively inhibited recombination of photoinduced electron-hole pairs by the S-scheme heterojunction. The carbon fibers further promoted the transfer of charges. Moreover, the carbon cloth-supported ZnO@Ag₃PO₄ can be easily separated from the solution and repeatedly used, demonstrating a fair recyclability and potential in practical applications.

Dietary Transfer of Zinc Oxide Nanoparticles Induces Locomotive Defects Associated with GABAergic Motor Neuron Damage in Caenorhabditis elegans

The widespread use of zinc oxide nanoparticles (ZnO-NPs) and their release into the environment have raised concerns about the potential toxicity caused by dietary transfer. However, the toxic effects and the mechanisms of dietary transfer of ZnO-NPs have rarely been investigated. We employed the bacteria-feeding nematode Caenorhabditis elegans as the model organism to investigate the neurotoxicity induced by exposure to ZnO-NPs via trophic transfer. Our results showed that ZnO-NPs accumulated in the intestine of C. elegans and also in Escherichia coli OP50 that they ingested. Additionally, impairment of locomotive behaviors, including decreased body bending and head thrashing frequencies, were observed in C. elegans that were fed E. coli pre-treated with ZnO-NPs, which might have occurred because of damage to the D-type GABAergic motor neurons. However, these toxic effects were not apparent in C. elegans that were fed E. coli pre-treated with zinc chloride (ZnCl₂). Therefore, ZnO-NPs particulates, rather than released Zn ions, damage the D-type GABAergic motor neurons and adversely affect the locomotive behaviors of C. elegans via dietary transfer.

Dissolved organic matters-enhanced Pb releases from nano- or submicron Pb sulfides and oxides

Diverse lead (Pb) particles possess different ecological risks not only due to their own toxicity differences but also because of different abilities to release toxic dissolved Pb. Dissolved organic matter (DOM) was a key factor influencing dissolution processes of metal particles. However, impacts of DOM on dissolution of different Pb nano- or submicron particles were not known yet. Herein, impacts of DOM on dissolution kinetics of lead sulfide (PbS), lead sulfate (PbSO₄), lead monoxide (PbO), lead tetroxide (Pb₃O₄) and lead dioxide (PbO₂) nano- or submicron particles were firstly investigated taking Pahokee Peat humic acid (PPHA) as an example. Results indicated PPHA improved the suspending stability of Pb particles through electrostatic repulsion, and enhanced releases of dissolved Pb. Final concentration of dissolved Pb was raised by 1.22-8.82 times with PPHA. This was attributed to ligand exchange interactions between PPHA and Pb particles. Theoretical computations indicated that not only sorption or ligand exchange energy, but also numbers of ligands on the surface of particles were key factors governing impacts of PPHA on dissolved Pb. This study provided a new mechanism insight into dissolution behavior of various Pb particles and will be beneficial to their ecological risk assessment.

Potential environmental risk of natural particulate cadmium and zinc in sphalerite- and smithsonite-spiked soils

Cadmium (Cd)-bearing sphalerite and smithsonite ore particles are ubiquitous in soils near metal-mining areas. Previous studies indicate that smithsonite is more readily dissolved in acidic waters and soils than sphalerite but the mobility of Cd and zinc (Zn) derived from these ores in soils is unknown. Using microcosm incubation experiments and microscopic and spectroscopic analysis, we found that the mobility of Cd and Zn derived from smithsonite is higher than from sphalerite. The mobilization rates of Cd (16.6%) and Zn (13.7%) released from smithsonite in soils after 30-day incubation experiments were higher than those from sphalerite (Cd, ~ 1.42%; Zn, ~ 0.75%). Moreover, the percentages of Cd²⁺ and Zn²⁺ in soil pore water showed a dynamic increase in smithsonite-spiked treatments but a decrease in sphalerite-spiked treatments. HRTEM-EDX-SAED analysis further indicates the occurrence of dynamic transformation of amorphous Cd and Zn species in soil pore water to crystalline ZnS and iron oxides in sphalerite-spiked soil but crystalline ZnCO₃ nanoparticles were dynamically transformed to amorphous metal-bearing species in smithsonite-spiked soil. The opposite transformation trends in pore water of Zn ore-spiked soils provide new insights into the Cd environmental risks in soils affected by Zn mining.

ZnO Nanomaterials and Ionic Zn Partition within Wastewater Sludge Investigated by Isotopic Labeling

The increasing commercial use of engineered zinc oxide nanomaterials necessitates a thorough understanding of their behavior following their release into wastewater. Herein, the fates of zinc oxide nanoparticles (ZnO NPs) and ionic Zn in a real primary sludge collected from a municipal wastewater system are studied via stable isotope tracing at an environmentally relevant spiking concentration of 15.2 µg g^-1. Due to rapid dissolution, nanoparticulate ZnO does not impart particle-specific effects, and the Zn ions from NP dissolution and ionic Zn display indistinguishable behavior as they partition equally between the solid, liquid, and ultrafiltrate phases of the sludge over a 4-h incubation period. This work provides important constraints on the behavior of engineered ZnO nanomaterials in primary sludge-the first barrier in a wastewater treatment plant-at low, realistic concentrations. As the calculated solid-liquid partition coefficients are significantly lower than those reported in prior studies that employ unreasonably high spiking concentrations, this work highlights the importance of using low, environmentally relevant doses of engineered nanomaterials in experiments to obtain accurate risk assessments.

A critical review on the role of abiotic factors on the transformation, environmental identity and toxicity of engineered nanomaterials in aquatic environment

Engineered nanomaterials (ENMs) are at the forefront of many technological breakthroughs in science and engineering. The extensive use of ENMs in several consumer products has resulted in their release to the aquatic environment. ENMs entering the aquatic ecosystem undergo a dynamic transformation as they interact with organic and inorganic constituents present in aquatic environment, specifically abiotic factors such as NOM and clay minerals, and attain an environmental identity. Thus, a greater understanding of ENM-abiotic factors interactions is required for an improved risk assessment and sustainable management of ENMs contamination in the aquatic environment. This review integrates fundamental aspects of ENMs transformation in aquatic environment as impacted by abiotic factors, and delineates the recent advances in bioavailability and ecotoxicity of ENMs in relation to risk assessment for ENMs-contaminated aquatic ecosystem. It specifically discusses the mechanism of transformation of different ENMs (metals, metal oxides and carbon based nanomaterials) following their interaction with the two most common abiotic factors NOM and clay minerals present within the aquatic ecosystem. The review critically discusses the impact of these mechanisms on the altered ecotoxicity of ENMs including the impact of such transformation at the genomic level. Finally, it identifies the gaps in our current understanding of the role of abiotic factors on the transformation of ENMs and paves the way for the future research areas.

Dissolution of Zinc Oxide Nanoparticles in the Presence of Slow Acid Generators

We describe a preliminary investigation of the dissolution dynamics of zinc oxide nanoparticles in the presence of cyclic esters (δ-gluconolactone and propanesultone) as slow acid generators. The particles dissolution is monitored by means of turbidimetry and correlated with the evolution of pH over time. The results could be of interest for the design of chemically programmable colloidal systems.

The co-occurrence of Zn-and Cu-based engineered nanoparticles in soils: The metal extractability vs. toxicity to Folsomia candida

The presence of engineered nanoparticles (ENPs) in soil gradually increases, among others due to the nano-agrochemicals application. So far, the co-existence of different ENPs in soil is poorly examined. Here, the metal extractability and toxicity of soils spiked (300 mg kg^-1) singly and jointly with Zn- and Cu-based ENPs or metal salts were tested. The samples were aged for 1 and 90 days. The predicting available metal component of ENPs concentrations were determined by different methods including soil pore water collection and batch extractions with H₂O, CaCl₂ or DTPA. Survival and reproduction of Folsomia candida were also evaluated. The combined effect of ENPs on the extractability of metals was mainly found with DTPA characterized by the highest leaching capacity among the used extractants. In fresh soil, the mixtures of ENPs differentiated only DTPA-extractable Cu level, while aging resulted in changes in both Zn and Cu concentrations leached by CaCl₂ or DTPA. However, the character of the combined effect was an ENPs- and soil type-dependent, whereas the mixtures of metal salts mostly provided higher Zn and Cu recovery than the individual compounds. The pattern of co-toxicity of metal-oxide ENPs was also time-dependent: the antagonistic and synergistic effect was observed in the samples after 1 and 90 days, respectively. However, the toxicity was weakly related with extractable concentrations in both single and joint treatment of metal compounds. The distinct joint effect patterns of ENPs imply the need for more in-depth investigation of mechanisms of activity of ENPs mixtures in soil.

Measuring ZnO nanoparticles available concentrations in contaminated soils using the diffusive gradient in thin-films (DGT) technique

A major gap in understanding nanomaterials behaviour in the environment is a lack of reliable tools to measure their available concentrations. In this research we use diffusive gradients in thin films (DGT) for measuring concentrations of zinc oxide nanoparticles (ZNO NPs) in soils. Available nanoparticle concentrations were assessed by difference, using paired DGT devices with and without 1000 MWCO dialysis membranes to exclude NPs. We used ZnO because its toxic effects are accelerated through dissolution to Zn²⁺. Our test soils had different pH and organic matter (OM) contents, which both affect the dissolution rate of ZnO NPs. Woburn (pH ≈ 6.9, OM ≈ 1.8%) and Lufa (pH ≈ 5.9, OM ≈ 4.2%) soils were spiked to a single concentration of 500 mg of ZnO NPs per 1 kg of soil and the available concentrations of ZnO NPs and dissolved zinc were evaluated in 3, 7, 14, 21, 28, 60, 90, 120, 150 and 180 day intervals using DGT. The results showed that the dissolution of ZnO NPs, as well as the available concentrations of both dissolved and nanoparticulate Zn, was much higher in Lufa soil than in Woburn. This work demonstrates that DGT can be used as a simple yet reliable technique for determining concentrations of ZnO NPs in soils and probing its dissolution kinetics.

The chronic effects of CuO and ZnO nanoparticles on Eisenia fetida in relation to the bioavailability in aged soils

The bioavailability and bioaccumulation of metal-based engineered nanoparticles (ENPs) in soils need to be evaluated in environmentally relevant scenarios. The aim of this study was an analysis of potentially available metal-component ENPs (nano-ZnO and nano-CuO) in soils. Earthworms (Eisenia fetida) were used to examine the bioaccumulation potential of ENPs. Micro-particles (micro-ZnO and micro-CuO) and metal salts (ZnCl₂ and CuCl₂) were used to evaluate the nano-effect and the activity of dissolved ions, respectively. Zn- and Cu-compounds were added to sandy loam and silt loam at a concentration of 10 mg kg^-1. The bioavailable fractions of metals were extracted from soil using H₂O, MgCl₂ with CH₃COONa or EDTA. EDTA was the most effective extractant of Zn and Cu (10.06-11.65 mg Zn kg^-1 and 2.69-3.52 mg Cu kg^-1), whereas the H₂O-extractable metal concentration was at the lowest level (1.98-2.12 mg Zn kg^-1 and 0.54-0.82 Cu mg kg^-1). The bioavailable metal concentrations were significantly higher in silt loam than sandy loam soil, which was related to the higher pH value of silt. There were no significant differences between the Zn content in the earthworms incubated in the two soils, which may confirm the auto-regulation of the Zn content by earthworms. However, the bioaccumulation of Cu was strongly correlated with the extractable Cu concentrations. The juvenile earthworms accumulated Cu and Zn more than adults. Based on our results, aging neutralized the differences between the ionic and particulate effects of metal-compounds.

Toxicological effects of zinc oxide nanoparticle exposure: an in vitro comparison between dry aerosol air-liquid interface and submerged exposure systems

Engineered nanomaterials (ENMs) are increasingly produced and used today, but health risks due to their occupational airborne exposure are incompletely understood. Traditionally, nanoparticle (NP) toxicity is tested by introducing NPs to cells through suspension in the growth media, but this does not mimic respiratory exposures. Different methods to introduce aerosolized NPs to cells cultured at the air-liquid-interface (ALI) have been developed, but require specialized equipment and are associated with higher cost and time. Therefore, it is important to determine whether aerosolized setups induce different cellular responses to NPs than traditional ones, which could provide new insights into toxicological responses of NP exposure. This study evaluates the response of human alveolar epithelial cells (A549) to zinc oxide (ZnO) NPs after dry aerosol exposure in the Nano Aerosol Chamber for In Vitro Toxicity (NACIVT) system as compared to conventional, suspension-based exposure: cells at ALI or submerged. Similar to other studies using nebulization of ZnO NPs, we found that dry aerosol exposure of ZnO NPs via the NACIVT system induced different cellular responses as compared to conventional methods. ZnO NPs delivered at 1.0 µg/cm² in the NACIVT system, mimicking occupational exposure, induced significant increases in metabolic activity and release of the cytokines IL-8 and MCP-1, but no differences were observed using traditional exposures. While factors associated with the method of exposure, such as differing NP aggregation, may contribute toward the different cellular responses observed, our results further encourage the use of more physiologically realistic exposure systems for evaluating airborne ENM toxicity.

Influence of NOM on the Stability of Zinc Oxide Nanoparticles in Ecotoxicity Tests

Nanomaterials are known to aggregate in the presence of ions. Similarly, the aggregation of zinc oxide nanoparticles (ZnO NPs) exposed to various ions such as sodium chloride and calcium chloride in water systems increases with the ionic strength. Therefore, for accurate toxicity studies, it is necessary to conduct a test using natural organic matters (NOMs) as additional dispersants that strengthen stability with increased repulsive forces. The three types of ecotoxicity tests based on the dispersion stability test using NOM showed that the toxicities of the three test samples decreased in the presence of NOM. To determine how NOM improved dispersion and reduced toxicities, we analyzed the ionization degree of ZnO NPs with and without NOM and found that the solubility was below 2 mg/L with a negligible change over time, implying that the ionization effect was low. The absolute value of the surface charge of particles increased in the presence of NOM, resulting in increased repulsive electrostatic forces and steric hindrance, causing less aggregation and more dispersion. Additionally, although the NOM used in the test is considered an effective dispersant that does not have a toxicological effect on aquatic organisms, the presence of NOM resulted in reduced toxicities and should be further investigated to establish it as a standard test method.

The Crucial Role of Environmental Coronas in Determining the Biological Effects of Engineered Nanomaterials

In aquatic environments, a large number of ecological macromolecules (e.g., natural organic matter (NOM), extracellular polymeric substances (EPS), and proteins) can adsorb onto the surface of engineered nanomaterials (ENMs) to form a unique environmental corona. The presence of environmental corona as an eco-nano interface can significantly alter the bioavailability, biocompatibility, and toxicity of pristine ENMs to aquatic organisms. However, as an emerging field, research on the impact of the environmental corona on the fate and behavior of ENMs in aquatic environments is still in its infancy. To promote a deeper understanding of its importance in driving or moderating ENM toxicity, this study systemically recapitulates the literature of representative types of macromolecules that are adsorbed onto ENMs; these constitute the environmental corona, including NOM, EPS, proteins, and surfactants. Next, the ecotoxicological effects of environmental corona-coated ENMs on representative aquatic organisms at different trophic levels are discussed in comparison to pristine ENMs, based on the reported studies. According to this analysis, molecular mechanisms triggered by pristine and environmental corona-coated ENMs are compared, including membrane adhesion, membrane damage, cellular internalization, oxidative stress, immunotoxicity, genotoxicity, and reproductive toxicity. Finally, current knowledge gaps and challenges in this field are discussed from the ecotoxicology perspective.

On-line determination of soluble Zn content and size of the residual fraction in PM2.5 incubated in various aqueous media

Transition metals in airborne particulate matter, especially those with aerodynamic diameters no more than 2.5 μm (PM_2.5), have attracted considerable attention due to their potential environmental and human health risks. However, determination of these potential risks requires comprehensive knowledge of their dissolution behavior and residual size in aqueous media. Herein, we describe an analytical method for on-line determination of the soluble fraction of Zn as a model transition metal and the size of residual PM_2.5 using hollow fiber flow field-flow fractionation (HF5) coupled with UV-vis absorption spectroscopy and inductively coupled plasma optical emission spectroscopy. HF5 was directly applied on the incubated samples in pure water (PW), simulated natural water (SNW), and simulated lung fluid (SLF) due to its efficient in-line filtration and excellent fractionation resolution. Firstly, the potential of the proposed method (under optimized conditions) for size characterization was assessed against commercial silica microparticles, and results in good agreement with manufacturer and scanning electron microscopy values were obtained. The accuracy of quantification of soluble Zn in various media was then validated using a standard reference material in terms of satisfactory recoveries compared with the reference values. For the real PM_2.5 samples collected from different sites in Beijing, China, the soluble Zn percentages in PW, SNW, and SLF were within 15.4-16.7%, 10.6-12.7%, and 43.1-46.9%, respectively, with the amount of particles smaller than ~10 nm released from PM_2.5 increasing in the order of SNW < PW < SLF. The proposed HF5-based method provides a powerful and efficient tool for the quantification of soluble transition metal fractions and size characterization of residual particles with reduced analysis times, thus possessing great promise in real-time tracking of the transformation of PM_2.5 in environmental and physiological media and in risk assessment.

The effect of pH and ageing on the fate of CuO and ZnO nanoparticles in soils

The objective of this study was to evaluate the fractionation of ZnO and CuO engineered nanoparticles (ENPs) in soils with a pH adjusted to 4.0, 6.5, and 9.0 after 1 day and 30 days of incubation. Based on the multi-stage extraction, 5 fractions of metals were determined. Moreover, the effect of ENPs on the activity of acid, neutral and alkaline phosphatase was determined. The results of the study revealed that pH had a dominant effect on the metal participation in soils. The levels of those fractions of metals differed between nano-ZnO and nano-CuO, which could have resulted from differences in the dissolution of the ENPs. After 1 day, the concentration of Zn²⁺ (0.02-7.4 mg L^-1) was 10 times higher than that of Cu²⁺. The metal fractionation in soil treated with ENPs and metal salts may also confirm the role of ENP dissolution. The concentration of potentially bioavailable fraction of Zn increased with a drop in pH. At a 4 pH concentration of Zn in the treatment with nano-ZnO and ZnCl₂ was at a similar level (42.1-45 mg kg^-1), whereas the addition of nano-CuO resulted in a lower content of Cu (24.7 mg kg^-1) than CuCl₂ (36.5 mg kg^-1). On the other hand, the concentration of fraction exchangeable of both metals in the alkaline soil did not exceed the level of 5.0 mg kg^-1. Sample incubation time was especially important for metal participation in samples with a pH of 6.5. The greatest differentiation of metal fractionation between the soils was also noted at a pH of 6.5, which could also have been a result of other properties of the soils. The strong effect of pH on the lability of ENPs in soils confirmed a need to trace the fate of ENPs in extreme soil conditions as well as in changing environment.

A voltammetric investigation of the sulfidation of silver nanoparticles by zinc sulfide

Silver nanoparticles (Ag NPs) are among the most common forms of nanoparticles in consumer products, yet the environmental implications of their widespread use remain unclear due to uncertainties about their fate. Because sulfidation of Ag NPs results in the formation of a stable silver sulfide (Ag₂S) product, it is likely an important removal mechanism of bioavailable silver in natural waters. In addition to sulfide, the complete conversion of Ag NPs to Ag₂S will require dissolved oxygen or some other oxidant so dispersed metal sulfides may be an important pool of reactive sulfide for such reactions in oxygenated systems. The reaction of Ag NPs with zinc sulfide (ZnS) was investigated using a voltammetric method, anodic stripping voltammetry (ASV). ASV provided sensitive, in situ measurements of the release of zinc (Zn²⁺) cations resulting from the cation exchange reaction between Ag NPs and ZnS. The effects of Ag NP size and surface coatings on the initial rates of sulfidation by ZnS were examined. Sulfidation of smaller Ag NPs generally occurred faster and to a greater extent due to their larger relative surface areas. Sulfidation of Ag NPs capped by citrate and lipoic acid occurred more rapidly relative to polyvinylpyrrolidone (PVP) and branched polyethylene (BPEI). This study demonstrates the utility of voltammetry for such investigations and provides insights into important factors controlling Ag NP sulfidation such as availability of dissolved oxygen, Ag NP size and Ag NP surface coating. Furthermore, this work demonstrates the importance of cation exchange reactions between silver and metal sulfides, and how the environmental release of Ag NPs could alter the speciation of other metals of environmental significance.

Quantitative investigation of ZnO nanoparticle dissolution in the presence of δ-MnO2

The widespread use of zinc oxide nanoparticles (ZnO NPs), the second most produced nanomaterial, inevitably leads to their release into the environment. In this study, dissolution and transformation of ZnO NPs in the presence of δ-MnO₂, an abundant and ubiquitous manganese (Mn) oxide mineral, was investigated via a suite of techniques covering bulk to molecular scales. Dissolution kinetics indicated that the presence of δ-MnO₂ significantly affected ZnO NP dissolution rate/trend and equilibrium Zn²⁺ concentration, which were found to be mainly dependent on the concentration and mass ratio of ZnO NPs and δ-MnO₂. Approximately 300 mg ZnO NPs per g δ-MnO₂ was expected for ZnO NP uptake at pH 7.0 via ZnO NP dissolution and surface Zn²⁺ adsorption. X-ray diffraction (XRD), ζ potential, high-resolution transmission electron microscopy (HR-TEM), and Zn K-edge X-ray absorption spectroscopy (XAS) results revealed that when the mole content of ZnO NPs was less than the total adsorption sites of δ-MnO₂ surface, ZnO NPs were completely dissolved and adsorbed on δ-MnO₂ surface in the form of inner-sphere complexes. A fraction of ZnO NPs persisted when the mole ratio of ZnO to δ-MnO₂ further increased. These results suggest that the transformation and fate of ZnO NPs is affected by environment-relevant minerals such as Mn oxides due to their huge capacity of fixing dissolved metal cations at the surface or interlayer structure.

The promoted dissolution of copper oxide nanoparticles by dissolved humic acid: Copper complexation over particle dispersion

Humic substances are the dominant dissolved organic matter fraction in the aqueous phase of environmental media. They would inevitably react with chemicals released into the environment. The influence of dissolved humic acid (DHA) on the dissolution and dispersion of copper oxide nanoparticles (CuO NPs, 50 nm, 49.57 mg L^-1) was therefore investigated in the present study. In addition to dispersing CuO NPs and reducing the size of the aggregates, the amount of released Cu from CuO NPs was found to increase over time with increasing concentrations of DHA, 96% of which was present as organic complexes after 72 h. At DHA concentrations exceeding 16.09 mg C L^-1, the complexation coefficients of DHA with Cu and the adsorptivity of CuO NPs to DHA were both reduced due to increased homo-conjugation of DHA as promoted by negative charge-assisted H-bond. Although the adsorption capacity of DHA kept increasing up to 57.07 mg C L^-1, the hydrodynamic diameter and ζ-potential were similar and the percentages of total released Cu continued to increase linearly to 4.92% at higher levels of DHA (30.13-57.07 mg C L^-1). Thereupon, DHA promoted the dissolution of CuO NPs in a concentration-dependent fashion. The driving force was complexation of Cu by DHA, rather than the balancing between the exposed and the covered surface area of the CuO NPs due to DHA adsorption. Our findings facilitate understanding the underlying mechanisms on how DHA impacts the CuO NPs environmental behavior (or fate) as well as on their kinetics.

Characterization for the transformation of dissolved organic matters during ultraviolet disinfection by differential absorbance spectroscopy

The transformation of dissolved organic matter (DOM) during various disinfection processes has raised great concerns due to the generation of carcinogenic disinfection by-products (DBPs). Ultraviolet (UV) irradiation is an effective method for drinking water disinfection, during which DOM undergoes changes in functional groups and molecular weight. In this study, the spectrophotometric titration and gel permeation chromatography (GPC) determination were employed to investigate the changes in oxygenated groups and weight-averaged molecular weight (M_w) of two typical DOM during UV irradiation. The differential absorbance spectra (DAS) of DOM could be deconvoluted into six Gaussian bands. The change of relative band intensity was attributed to the change of oxygenated groups (carboxylic and phenolic groups), which was confirmed by combining DAS data and revised Non-Ideal Competitive Adsorption -Donnan model. The GPC result demonstrated that the M_w of DOM decreased after UV disinfection. Moreover, a linear correlation between M_w and the intensity of deconvoluted Gaussian band from DAS was established, which might be served as an alternative approach to estimate M_w and predict the hydrophobicity and DBPs formation potential of DOM in drinking water treatment and monitoring.

Impact of the changes in bacterial outer membrane structure on the anti-bacterial activity of zinc oxide nanoparticles

Metal and metal oxide nanoparticles (NPs) have been increasingly utilized in many industries to harness their documented antibacterial properties. However, the mechanism(s) of action is still debated in the literature. The aim of this study is to understand how changes in outer membrane charge of a test bacteria Haemophilus influenzae alter the antibacterial activity of ZnO NPs of average sizes of 20 nM and 60 nM. H. influenzae outer membrane charge was altered through use of the wild strain (Rd) and mutant lines H543 and H446. Results indicate that antibacterial effects are both concentration and size dependent, with smaller NPs causing increased antibacterial response. Most critically, antibacterial assays and collected TEM images demonstrate that increasing negative charge on the outer membrane of bacteria decreased the antibacterial activity of the ZnO NPs. Finally, this work demonstrates the possibility of using ZnO NPs to treat H. influenzae infection in clinical settings.

Bovine Serum Albumin Enhances Silver Nanoparticle Dissolution Kinetics in a Size- and Concentration-Dependent Manner

The dissolution of silver nanoparticles (AgNPs) to release Ag(I)(aq) is an important mechanism in potentiating AgNP cytotoxicity and imparting their antibacterial properties. However, AgNPs can undergo other simultaneous biophysicochemical transformations, such as protein adsorption, which can mediate AgNP dissolution behaviors. We report the comprehensive analysis of AgNP dissolution and protein adsorption behaviors with monolayer surface coverage of AgNPs by bovine serum albumin (BSA). AgNP dissolution rate constants, k_dissolution, were quantified over several particle sizes (10, 20, and 40 nm) and BSA concentrations (0-2 nM) using linear sweep stripping voltammetry. Across all particle sizes, the dissolution rate constant increased with increasing BSA concentrations. However, protein-enhanced dissolution behaviors were most pronounced for 10 nm AgNPs, which exhibited 3.6-fold and 7.7-fold relative enhancement when compared to 20 and 40 nm AgNPs, respectively. Changes to AgNP surface properties upon interaction with BSA were monitored using dynamic light scattering and zeta potential measurements, while BSA-AgNP complex formation was evaluated using UV-vis spectroscopy and circular dichroism spectroscopy. A subtle increase in the BSA-AgNP association constant was observed with an increase in the AgNP size. Together, these results suggest that the AgNP size dependence of BSA-enhanced dissolution of AgNPs is possibly mediated through both displacement of Ag(I)(aq)-loaded BSA by excess protein in the bulk solution and minimized accessibility of the AgNP surface because of BSA adsorption.

Importance of Surface Coating to Accumulation Dynamics and Acute Toxicity of Copper Nanomaterials and Dissolved Copper in Daphnia magna

We evaluated the effect of copper oxide nanomaterials (CuO NMs), uncoated and with 3 different surface coatings (carboxylated, pegylated, and ammonia groups), on acute toxicity and accumulation dynamics in Daphnia magna. With the use of biodynamic modelling, biosorption and elimination rate constants were determined for D. magna following waterborne exposure to dissolved Cu and CuO NMs. The relationship between modeled parameters and acute toxicity endpoints was evaluated to investigate whether accumulation dynamics parameters could be used as a predictor of acute toxicity. The Langmuir equation was used to characterize the biosorption dynamics of Cu NMs and Cu chloride, used as dissolved Cu control. Uptake rates showed the following NM rankings: pristine-CuO > NH₃ -CuO > aqueous Cu > polyethylene glycol (PEG)-CuO > COOH-CuO. To determine Cu elimination by D. magna, a one-compartment model was used. Different elimination rate constants were estimated for each chemical substance tested. Those that were easily biosorbed were also easily removed from organisms. Biosorption and depuration properties of NMs were correlated with zeta potential values and diameters of NM agglomerates in the suspensions. No link was found between biosorption and toxicity. Waterborne exposures to more difficult-to-biosorb CuO NMs were more likely to induce adverse effects than those that biosorbed easily. It is proposed that some physicochemical properties of NMs in media, including zeta potential and agglomerate diameter, can lead to higher biosorption but do not necessarily affect toxicity. The mode of interaction of the NMs with the organism seems to be complex and to depend on chemical speciation and physicochemical properties of the NMs inside an organism. Moreover, our findings highlight that coating type affects the biosorption dynamics, depuration kinetics, and dissolution rate of NMs in media. Environ Toxicol Chem 2020;39:287-299. © 2019 SETAC.

Effects of divalent copper on tetracycline degradation and the proposed transformation pathway

To reveal the characteristics of tetracycline (TC) photocatalytic degradation under Cu(II) coexistence, effects of Cu(II) on TC photocatalytic degradation by ZnO nanoparticles (ZnO NPs) as a function of pH, humic acid (HA), and initial Cu(II) concentration were investigated. Interaction of TC with Cu(II) in the treatment process was analyzed by circular dichroism (CD) spectroscopy, while TC degradation pathway was investigated by high-performance liquid chromatography-mass spectrometry. Sixty-five percent and ninety-one percent TC degradation within 60 min in the absence and presence of Cu(II), respectively, was reported. Both adsorption and photocatalytic degradation of TC under Cu(II) coexistence increased with increasing pH from 3 to 6, while decreased with further increase in pH. HA inhibited the degradation of TC by ZnO NPs both in the presence as well absence of Cu(II), while TC degradation decreased from 91 to 73% and from 73 to 37% in the presence and absence of Cu(II), respectively. TC degradation by ZnO NPs first increased then decreased with increasing Cu(II). Maximum TC degradation (about 94%) was obtained in the optimum concentration range of Cu(II) (0.05-0.15 mmol/L). In addition, there was a lag effect between TC adsorption and degradation on ZnO NPs. TC degradation was improved via Cu(II)-TC surface complexation and followed N-demethylation and hydroxylation routes. This study could be of potential importance in extrapolating the transformation of TC or other antibiotics under the coexistence of heavy metals in water.

The Toxicity of Nanoparticles to Organisms in Freshwater

Nanotechnology is a rapidly growing industry yielding many benefits to society. However, aquatic environments are at risk as increasing amounts of nanoparticles (NPs) are contaminating waterbodies causing adverse effects on aquatic organisms. In this review, the impacts of environmental exposure to NPs, the influence of the physicochemical characteristics of NPs and the surrounding environment on toxicity and mechanisms of toxicity together with NP bioaccumulation and trophic transfer are assessed with a focus on their impacts on bacteria, algae and daphnids. We identify several gaps which need urgent attention in order to make sound decisions to protect the environment. These include uncertainty in both estimated and measured environmental concentrations of NPs for reliable risk assessment and for regulating the NP industry. In addition toxicity tests and risk assessment methodologies specific to NPs are still at the research and development stage. Also conflicting and inconsistent results on physicochemical characteristics and the fate and transport of NPs in the environment suggest the need for further research. Finally, improved understanding of the mechanisms of NP toxicity is crucial in risk assessment of NPs, since conventional toxicity tests may not reflect the risks associated with NPs. Behavioural effects may be more sensitive and would be efficient in certain situations compared with conventional toxicity tests due to low NP concentrations in field conditions. However, the development of such tests is still lacking, and further research is recommended.

Synthesis and Characterization of New Multifunctional Self-Boosted Filters for UV Protection: ZnO Complex with Dihydroxyphenyl Benzimidazole Carboxylic Acid

The incidence of skin cancer is increasing both because of climate change and the increase in pollution than people’s incorrect habits of sun exposure. In these regards, sunscreen and photoprotection are essential tools in consenting the benefits induced by safe solar light exposition and skin cancer prevention. In this work, a new class of sunscreen filter was synthesized by chemical combination of a physical filter (ZnO) and Oxisol (dihydroxyphenyl benzimidazole carboxylic acid), an antioxidant molecule with booster effect. In this work, a new class of filters with new properties was achieved by direct functionalization of particles surface. A full characterization of this multifunctional ingredient (ZnO–Ox) was conducted: Compared with the simple mixture, the new filter acts as a multifunctional molecule showing a higher Sun Protection Factor (SPF), a better cytotoxic profile (MTT and NRU assay), and anti-acne activity. A strong reduction of photocatalytic activity of ZnO was observed, also improving the safety profile.

The limited facilitating effect of dissolved organic matter extracted from organic wastes on the transport of titanium dioxide nanoparticles in acidic saturated porous media

The complexity of natural dissolved organic matter (DOM) motivates the determination of how DOM from diverse sources affects the environmental behaviors of engineered nanoparticles. Here, three types of DOM, DOM extracted from swine manure (SWDOM), sludge (SLDOM) and sediment (SEDOM), were characterized, and their effects on the transport of titanium dioxide nanoparticles (TiO₂ NPs, 30 nm in diameter) were evaluated and compared with those of humic acid (HA). Characterization tests showed differences in the aromaticity and weight-average molecular weight (M_w) properties among the three extracted DOM solutions, and greater distinctions were found between the extracted DOM and HA. All the extracted DOM facilitated TiO₂ NPs transport in acidic porous media. Nevertheless, the enhancing effects varied among the different extracted DOM types. SWDOM had a promoting effect on TiO₂ NPs mobility that was equivalent to that of SEDOM and much higher than that of SLDOM. However, the facilitating effects of all three extracted DOM types were limited compared to that of HA. Based on the combined analysis of DOM properties and TiO₂ NPs transport behaviors, it could be concluded that aromaticity and M_w were the key properties determining the limited promoting effects of DOM on TiO₂ NPs mobility, and the specific UV absorbance at 280 nm (normalized by concentration, SUVA₂₈₀) was a facile and useful indicator of the DOM-promoted transport of TiO₂ NPs. These findings revealed that transport potential in the presence of DOM would be overestimated if either HA or fulvic acid were chosen as the DOM model in studies.

In Situ Quantification of Silver Nanoparticle Dissolution Kinetics in Simulated Sweat Using Linear Sweep Stripping Voltammetry

Linear sweep stripping voltammetry (LSSV) is demonstrated as a sensitive, rapid, and cost-efficient analytical technique for the quantification of silver nanoparticle (AgNP) dissolution rates in simulated sweat. LSSV does not require the extensive sample preparation (e.g., ultrafiltration or centrifugation) needed by more commonly employed techniques, such as atomic spectroscopy. The limit of detection (LOD) of Ag(I)(aq) was 14 ± 6 μg L^-1, and measured dissolution rate constants, k_dissolution, varied from 0.0168-0.1524 h^-1, depending on solution conditions. These values are comparable and agree well with those determined by others in the literature using atomic spectroscopy. Importantly, LSSV had the necessary sensitivity to distinguish the effects of SSW solution conditions on AgNP dissolution rates. Specifically, enhanced dissolution rates were observed with decreased pH and with increased NaCl concentration. The colloidal stability of AgNPs in SSW solutions was also characterized using dynamic light scattering (DLS), ζ potential, and quantitative UV-vis spectroscopy measurements. An increase in AgNP aggregation rate was observed with increased NaCl concentration in SSW, suggesting that the enhancement in AgNP dissolution is driven by the large Cl/Ag ratio, even as the AgNPs undergo significant aggregation.

Spatially Resolved Dissolution and Speciation Changes of ZnO Nanorods during Short-Term in Situ Incubation in a Simulated Wastewater Environment

Zinc oxide engineered nanomaterials (ZnO ENMs) are used in a variety of applications worldwide due to their optoelectronic and antibacterial properties with potential contaminant risk to the environment following their disposal. One of the main potential pathways for ZnO nanomaterials to reach the environment is via urban wastewater treatment plants. So far there is no technique that can provide spatiotemporal nanoscale information about the rates and mechanisms by which the individual nanoparticles transform. Fundamental knowledge of how the surface chemistry of individual particles change, and the heterogeneity of transformations within the system, will reveal the critical physicochemical properties determining environmental damage and deactivation. We applied a methodology based on spatially resolved in situ X-ray fluorescence microscopy (XFM), allowing observation of real-time dissolution and morphological and chemical evolution of synthetic template-grown ZnO nanorods (∼725 nm length, ∼140 nm diameter). Core-shell ZnO-ZnS nanostructures were formed rapidly within 1 h, and significant amounts of ZnS species were generated, with a corresponding depletion of ZnO after 3 h. Diffuse nanoparticles of ZnS, Zn₃(PO₄)₂, and Zn adsorbed to Fe-oxyhydroxides were also imaged in some nonsterically impeded regions after 3 h. The formation of diffuse nanoparticles was affected by ongoing ZnO dissolution (quantified by inductively coupled plasma mass spectrometry) and the humic acid content in the simulated sludge. Complementary ex situ X-ray absorption spectroscopy and scanning electron microscopy confirmed a significant decrease in the ZnO contribution over time. Application of time-resolved XFM enables predictions about the rates at which ZnO nanomaterials transform during their first stages of the wastewater treatment process.

Effects of multi-walled carbon nanotubes on metal transformation and natural organic matters in riverine sediment

In this study, pragmatic prospection of multi-walled carbon nanotubes (MWCNTs) is conducted considering their impacts on Cd transformation, microbial activity and natural organic matter (NOM) in sediments. Indeed, dose-dependent of MWCNTs acceleration in Cd sedimentation and immobilization in water-sediment interface has been found. Unexpectedly, even with the reduced Cd bioavailability, high ratios of MWCNTs incorporation led to exacerbated microbial inactivation. Besides, we noted that MWCNTs significantly lowered NOM contents in sediments. Chemical characterization results also demonstrated that high ratios of MWCNTs incorporation reduced the aromaticity, hydrophobicity and humification of fulvic acid (FA) and humic acid (HA) in sediments. The Cd binding results confirmed that quantity and chemical variation of NOM affected their central ability to Cd binding, referring to significant decrease in combined Cd contents. The findings indicated that reduction in humic substances and chemical structure variation might be the important reason attributed to the MWCNTs toxicity. This study provides novel mechanisms understanding the fate of carbon nanotubes considering the balance in environmental benefit and potential risks.

Effect of Soil Organic Matter, Soil pH, and Moisture Content on Solubility and Dissolution Rate of CuO NPs in Soil

The objectives of this research were to quantify the impact of organic matter content, soil pH and moisture content on the dissolution rate and solubility of copper oxide nanoparticles (CuO NPs) in soil, and to develop an empirical model to predict the dissolution kinetics of CuO NPs in soil. CuO NPs were dosed into standard LUFA soils with various moisture content, pH and organic carbon content. Chemical extractions were applied to measure the CuO NP dissolution kinetics. Doubling the reactive organic carbon content in LUFA 2.1 soil increased the solubility of CuO NP 2.7-fold but did not change the dissolution rate constant. Increasing the soil pH from 5.9 to 6.8 in LUFA 2.2 soil decreased the dissolution rate constant from 0.56 mol^1/3·kg^1/3·s^-1 to 0.17 mol^1/3·kg^1/3·s^-1 without changing the solubility of CuO NP in soil. For six soils, the solubility of CuO NP correlated well with soil organic matter content ( R² = 0.89) independent of soil pH. In contrast, the dissolution rate constant correlated with pH for pH < 6.3 ( R² = 0.89), independent of soil organic matter content. These relationships predicted the solubility and dissolution rate constants of CuO NP in two test soils (pH 5.0 and pH 7.6). Moisture content showed negligible impact on the dissolution kinetics of CuO NPs. Our study suggests that soil pH and organic matter content affect the dissolution behavior of CuO NP in soil in a predictable manner.

The influence of surface waters on the bioavailability and toxicity of zinc oxide nanoparticles in freshwater mussels

The release of engineered nanoparticles in the aquatic environment could pose a threat to the biota. The purpose of the study was to examine the influence of surface water characteristics on zinc oxide nanoparticles (nZnO) and ZnS0₄ toxicity to the freshwater mussel Dreissena polymorpha. Mussels were exposed to an equivalent concentration of 25 μg/L Zn as either nZnO or ZnSO₄ for 96 h at 15 °C in 4 types of surface waters: green water (high conductivity and pH with low natural organic matter content), brown water (low conductivity and pH with high natural organic matter content), diluted municipal effluent (high conductivity and pH with high urban organic matter content) and aquarium water (treated green water with organic matter removed). After the exposure period, mussels were analyzed for air-time survival, total and labile Zn levels in tissues, lipid metabolism (phospholipase A2, triglycerides levels) and oxidative stress (glutathione S-transferase, arachidonate cyclooxygenase, lipid peroxidation). The data revealed that mussels exposed to ZnSO₄ in controlled aquarium water accumulated more total and labile Zn tissues, decreased oxidative stress and triglycerides and increased air time survival. While nZnO had few effects in aquarium water, oxidative stress was enhanced and total Zn in tissues were decreased in brown water and diluted municipal effluent and triglycerides were higher in nZn-exposed mussels in brown water. Air-time survival was decreased in mussels kept in green water and nZnO. It was also decreased in mussels exposed to ZnSO₄ in green water and diluted municipal effluent. In conclusion, the fate and toxic effects of Zn could be influenced by both the chemical form (nanoparticles or ionic Zn) and surface water properties in freshwater mussels.

In the Search for Nanospecific Effects of Dissolution of Metallic Nanoparticles at Freshwater-Like Conditions: A Critical Review

Knowledge on relations between particle properties and dissolution/transformation characteristics of metal and metal oxide nanoparticles (NPs) in freshwater is important for risk assessment and product development. This critical review aims to elucidate nanospecific effects on dissolution of metallic NPs in freshwater and similar media. Dissolution rate constants are compiled and analyzed for NPs of silver (Ag), copper (Cu), copper oxide/hydroxide (CuO, Cu(OH)₂), zinc oxide (ZnO), manganese (Mn), and aluminum (Al), showing largely varying (orders of magnitude) constants when modeled using first order kinetics. An effect of small primary sizes (<15 nm) was observed, leading to increased dissolution rate constants and solubility in some cases. However, the often extensive particle agglomeration can result in reduced nanospecific effects on dissolution and also an increased uncertainty related to the surface area, a parameter that largely influence the extent of dissolution. Promising ways to model surface areas of NPs in solution using fractal dimensions and size distributions are discussed in addition to nanospecific aspects related to other processes such as corrosion, adsorption of natural organic matter (NOM), presence of capping agents, and existence of surface defects. The importance of the experimental design on the results of dissolution experiments of metal and metal oxide NPs is moreover highlighted, including the influence of ionic metal solubility and choice of particle dispersion methodology.

Defects and their behaviors in mineral dissolution under water environment: A review

Mineral dissolution is a spontaneous process that takes indispensible role in the determination of water quality in a specific water body. Deep insights into defects as a result of characterization technique development have greatly improved our understanding of their significances and behaviors in the dissolution within the mineral-water interface. Based on the progresses from previous decades, this review attempts to re-elaborate the molecular-scale process of dissolution. Material flow within the mineral/water interface is updated, with emphasis on the function of defect sites. A brief introduction of defect properties is presented, including the microscopic appearances and typical physicochemical characteristics. Feasible strategies that have been adopted to increase the defect abundance are inferred, which maybe enlightening for hydrometallurgy. The merits and drawbacks of the techniques that could be employed for the qualitative and quantitative determination of defect presence are introduced, although relatively satisfactory performances are noted. With the aid of these techniques, it is concluded that screw dislocation is the main defect type responsible for surface topography evolution as a result of dissolution. Finally, this review identifies the current knowledge gaps and future research needs for comprehensively identifying the significance of defects in mineral dissolution.

Interpreting the effects of natural organic matter on antimicrobial activity of Ag2S nanoparticles with soft particle theory

Natural organic matter (NOM) ubiquitously exists in natural waters and would adsorb onto the particle surface. Previous studies showed that NOM would alleviate the toxicity of nanomaterials, while the mechanism is seldom quantitatively interpreted. Herein, the effects of humic substances [Suwannee River fulvic acid (SRFA) and Suwannee River humic acid (SRHA)] and biomacromolecules [alginate and bovine serum albumin (BSA)] on the aggregation and antimicrobial effects of silver sulfide nanoparticles (Ag₂S-NPs) were investigated. The aggregation kinetics of Ag₂S-NPs in electrolyte solutions were in agreement with the results based on Derjaguin-Landau-Verwey-Overbeek (DLVO) theory. The dynamic light scattering (DLS) results showed that the SRFA, SRHA, alginate and BSA molecules coated on the Ag₂S-NPs surfaces. The NOM coating layer prevented salt-induced coagulation of Ag₂S-NPs, and the effects of BSA and SRHA on Ag₂S-NPs stabilizing were more obvious than that of SRFA and alginate. Flow cytometry analysis results suggested that BSA and SRHA were more effective on alleviating the Ag₂S-NPs induced cell (Escherichia coli) membrane damage than SRFA and alginate. After interpreting the electrophoretic mobility (EPM) data of the NOM coated Ag₂S-NPs by Ohshima's soft particle theory, it was found that the thickness of the NOM coating layers followed the orders of BSA > SRHA > alginate > SRFA. The E.coli cell membrane damage level was negatively correlated with the thickness and softness of the coating layer. NOM coating may physically alleviate the contact between NPs and E. coli cells and thus attenuate the extent of cell membrane damage caused by the NP-cell interaction. This work provides a new perspective for quantitatively interpreting the influence of NOM on the environmental behaviors and risks of nanomaterials.

Aggregation, sedimentation, and dissolution of CuO and ZnO nanoparticles in five waters

With the accelerated application of copper oxide (CuO) and zinc oxide (ZnO) nanoparticles (NPs) in commercial products, concerns about the potential impacts on the environment have been growing. Environmental behaviors of NPs are expected to significantly influence their fate and ecological risk in the aquatic environment. In this study, the environmental behaviors of two metallic NPs (CuO and ZnO NPs), including aggregation, sedimentation, and dissolution, were systematically evaluated in five representative waters (pool water, lake water, rainwater, tap water, and wastewater) with varying properties. Remarkable aggregation, sedimentation, and dissolution were observed for both metallic NPs, among which ZnO NPs exhibited greater influence. CuO (ZnO) NPs aggregated to 400 (500) nm, 500 (900) nm, and 800 (1500) nm in lake water, wastewater, and tap water, respectively. The sedimentation rates of CuO and ZnO NPs in the five waters were ranked as tap water > wastewater > lake water > pool water > rainwater. The dissolution of CuO and ZnO NPs in waters follows a first-order reaction rate model and is affected by ionic type, ionic strength (IS), and NOM (natural organic matter) concentrations. Redundancy analysis (RDA) indicated that the aggregation and sedimentation of NPs have a strong correlation, insofar as the sedimentation rates increase with increasing aggregation rates. The aggregation and dissolution of NPs have a negative correlation, insofar as the dissolution rates reduce with increasing aggregation rates. The aggregation, sedimentation, and dissolution of NPs can be influenced by ionic types, IS, and TOC in waters, among which, TOC may the dominant factor.

Finding the conditions for the beneficial use of ZnO nanoparticles towards plants-A review

Zinc oxide nanoparticles (ZnO NPs) have a wide range of applications in cosmetics, electrical, and optical industries. The wide range of applications of ZnO NPs, especially in personal care products, suggest they can reach major environmental matrices causing unforeseen effects. Recent literature has shown conflicting findings regarding the beneficial or detrimental effects of ZnO NPs towards terrestrial biota. In this review we carried out a comprehensive survey about beneficial, as well as detrimental aspects, of the ZnO NPs exposure toward various terrestrial plants. A careful scrutiny of the literature indicates that at low concentrations (about 50 mg/kg), ZnO NPs have beneficial effects on plants. Conversely, at concentrations above 500 mg/kg they may have detrimental effects, unless there is a deficiency of Zn in the growing medium. This review also remarks the critical role of the biotic and abiotic factors that may elevate or ameliorate the impact of ZnO NPs in terrestrial plants.

Influence of soil porewater properties on the fate and toxicity of silver nanoparticles to Caenorhabditis elegans

Engineered nanoparticles (NPs) entering the environment are subject to various transformations that in turn influence how particles are presented to, and taken up by, organisms. To understand the effect of soil properties on the toxicity of nanosilver to Caenorhabditis elegans, toxicity assays were performed in porewater extracts from natural soils with varying organic matter content and pH using 3-8 nm unfunctionalized silver (Ag 3-8Unf), 52-nm polyvinylpyrrolidone (PVP)-coated Ag NPs (Ag 52PVP), and AgNO₃ as ionic Ag. Effects on NP agglomeration and stability were investigated using ultraviolet-visible (UV-vis) spectroscopy and asymmetric flow field-flow fractionation (AF4); Ag⁺ showed greater overall toxicity than nanosilver, with little difference between the NP types. Increasing soil organic matter content significantly decreased the toxicity of Ag 3-8Unf, whereas it increased that of AgNO₃ . The toxicity of all Ag treatments significantly decreased with increasing porewater pH. Dissolution of both NPs in the porewater extracts was too low to have contributed to their observed toxic effects. The UV-vis spectroscopy revealed low levels of agglomeration/aggregation independent of soil properties for Ag 3-8Unf, whereas higher organic matter as well as low pH appeared to stabilize Ag 52PVP. Overall, both soil organic matter content and pH affected NP fate as well as toxicity to C. elegans; however, there appears to be no clear connection between the measured particle characteristics and their effect. Environ Toxicol Chem 2018;37:2609-2618. © 2018 SETAC.

Influence of Organic Ligands on the Colloidal Stability and Removal of ZnO Nanoparticles from Synthetic Waters by Coagulation

The large-scale production and usage of zinc oxide nanoparticles (ZnO NPs) may lead to their post-release into the aquatic environment. In this study, the effect of hydrophobic/hydrophilic organic ligands on sorption and sedimentation of ZnO NPs has been systematically investigated. In addition, the coagulation efficiency of ZnO NPs, Zn2+, dissolved organic carbon (DOC), and UV254 with varying ferric chloride (FC) dosages in synthetic waters were also evaluated. The results showed that the higher concentration of organic ligands, i.e., humic acid (HA), salicylic acid (SA), and L-cysteine (L-cys) reduced the ζ-potential and hydrodynamic diameter (HDD) of particles, which enhanced the NPs stability. The adsorption of organic ligands onto ZnO NPs was fitted with the Langmuir model, with maximum adsorption capacities of 143, 40.47, and 66.05 mg/g for HA, SA and L-cys respectively. Removal of up to 95% of ZnO NPs and Zn2+ was achieved in studied waters at the effective coagulation zone (ECR), above which excess charge induced by coagulant restabilized the NPs in suspension. Moreover, the removal rate of DOC and UV254 were found to be higher in hydrophobic waters than hydrophilic waters. The width of ECR strongly depends on the characteristics of source water. The waters with hydrophobic ligand and higher UV254 values require more coagulant than hydrophilic waters to achieve the similar ZnO NPs and Zn2+ removal. The results of Fourier transform infrared (FT-IR) analysis of ZnO NPs composite contaminant flocs indicated that the combined effect of enmeshment and charge neutralization might be a possible removal mechanism. These findings may facilitate the prediction of fate, transport, and removal of ZnO NPs in the natural waters, and might contribute to risk assessment, as well as decision making about engineered nanoparticles (ENPs) in aquatic systems.