Complex Mixtures of Chlorinated Paraffins Found in Hand Wipes of a Norwegian Cohort

Cumulative exposure assessment to polychlorinated alkanes (C8-36) to indoor dust from Iranian kindergartens: Occurrence and health risk

The environmental and public health concerns associated with chlorinated paraffins (CPs) are significant, given their widespread use, long-lasting persistence, and potential adverse health effects. The objective of this study was to assess the contamination of polychlorinated alkanes (PCAs-C8-36), the major contaminants in the CP technical mixtures, in kindergartens in Tehran, Iran, and to evaluate the cumulative exposure risks through various routes, including ingestion, dermal contact, and inhalation of dust. The results revealed a pervasive contamination with PCAs. The sum of PCAs-C10-20 across all samples was found to be 1370 ng/g dw, with median values of 500 ng/g dw for ∑PCAs-C10-13, 620 ng/g dw for ∑PCAs-C14-17, and 280 ng/g dw for ∑PCAs-C18-20. These levels did not correlate with outdoor environmental factors or indoor characteristics. Dermal contact constituted 64-84 % of total exposure, with toddlers showing higher intake than caretakers. A cumulative exposure assessment was conducted to calculate the hazard quotient (HQ). The highest HQ value was observed for girls in the case of ∑PCAs-C10-13 (6.2 × 10-5), and the HQ for all groups remained well below the risk threshold. Despite the low level of immediate risks, chronic exposure in vulnerable population groups justifies proactive measures. Further investigation of exposure sources and implementation of interventions to reduce potential health risks are recommended, given the ubiquity of CPs in indoor environments. ENVIRONMENTAL IMPLICATIONS: This study highlights significant environmental implications of pervasive polychlorinated alkanes (PCAs-C8-36) contamination in Tehran's kindergartens, highlighting their persistence and potential long-term ecological impacts. Despite cumulative exposure risks (HQs <1) via dust ingestion, dermal contact, and inhalation, the ubiquity of PCAs (∑PCAs-C10-20: 1370 ng/g dw) raises concerns about chronic low-dose exposure in vulnerable toddlers. The lack of correlation between contamination levels and environmental/indoor factors suggests complex, unidentified emission sources. These findings emphasize the need for proactive regulatory measures to mitigate CP releases and prioritize indoor environmental quality, particularly in child-centric settings. Further research is critical to identify exposure pathways and inform policies safeguarding public health against persistent organic pollutants.

Human exposure to polychlorinated alkanes (C8-36) in soil and dust from Nigerian e-waste sites: Occurrence, homologue pattern and health risk assessment

Electronic waste (e-waste) dismantling and dumpsite processes are recognized as significant sources of chlorinated paraffin (CP) exposure. This study aims to investigate the environmental occurrence and distribution of polychlorinated alkanes (PCAs-C8-36), specifically in soil and outdoor dust samples collected from e-waste dumpsites and automobile dismantling and resale sites in Nigeria. The results revealed a widespread occurrence of PCAs across all sampled locations. For the PCAs homologue groups ∑PCAs-C10-13, ∑PCAs-C14-17, and ∑PCAs-C18-20, the median concentrations were 1150 ng/g dry weight (dw), 1180 ng/g dw, and 370 ng/g dw in the dust samples, and 2840 ng/g dw, 1820 ng/g dw, and 830 ng/g dw in the soil samples, respectively. Notably, the homologue distribution patterns of PCAs-C8-36 were similar in both dust and soil samples. However, PCAs-C10-13 was found to be higher in the soil samples, likely due to the wet and/or dry deposition effect of the aerosols, given these chemicals' volatile nature and ease of atmospheric dispersion. Pearson correlation analysis further revealed a co-occurrence of contaminants in the soil samples, supporting the hypothesis that soil acts as a sink for persistent organic pollutants (POPs). Additionally, lower molecular weight polychlorinated biphenyls (PCBs) and organochlorine pesticides (OCPs) showed reduced correlation with the PCAs. Health risk assessments indicated that working on e-waste sites could potentially pose a risk to the workers' health. This study highlights the urgent need for mitigating occupational exposure to PCAs, especially in informal e-waste processing environments where personal protective measures are often lacking.

Polychlorinated alkanes in indoor environment: A review of levels, sources, exposure, and health implications for chlorinated paraffin mixtures

Polychlorinated n-alkanes (PCAs) are the main components of chlorinated paraffins (CPs) mixtures, that have been commonly grouped into short-chain (SCCPs, C10-13), medium-chain (MCCPs, C14-17), and long-chain (LCCPs, C18-30) CPs. PCAs pose a significant risk to human health as they are broadly present in indoor environments and are potentially persistent, bioaccumulative, and toxic. The lack of specific terminology and harmonization in analytical methodologies for PCA analysis complicates direct comparisons between studies. The present work summarizes the different methodologies applied for the analysis of PCAs in indoor dust, air, and organic films. The large variability between the reviewed studies points to the difficulties to assess PCA contamination in these matrices and to mitigate risks associated with indoor exposure. Based on our review of physicochemical properties of PCAs and previously reported sum of measurable S/M/LCCPs levels, the homologue groups PCAs-C10-13 are found to be mostly present in the gas phase, PCAs-C14-17 in particulate matter and organic films, and PCAs-C≥18 in settled dust. However, we emphasized that mapping PCA sources and distribution in the indoors is highly dependent on the individual homologues. To further comprehend indoor PCA distribution, we described the uses of PCA in building materials and household products to apportion important indoor sources of emissions and pathways for human exposure. The greatest risk for indoor PCAs were estimated to arise from dermal absorption and ingestion through contact with dust and CP containing products. In addition, there are several factors affecting indoor PCA levels and exposure in different regions, including legislation, presence of specific products, cleaning routines, and ventilation frequency. This review provides comprehensive analysis of available indoor PCA data, the physicochemical properties, applied analytical methods, possible interior sources, variables affecting the levels, human exposure to PCAs, as well as need for more information, thereby providing perspectives for future research studies.

Human bare and clothing-covered skin exposure to chlorinated paraffins for the general populations: Exposure pattern differential and significance of indirect dermal exposure via clothing-to-skin transport

To investigate human exposure to short-chain chlorinated paraffins (SCCPs) and medium-chain chlorinated paraffins (MCCPs) through dermal and oral intake via hand-to-mouth contact, wipes from the face, forearm, hand, and foot of 30 volunteers were sampled. The concentration of ∑SCCPs and ∑MCCPs ranged from 0.66 to 119 and 0.71 to 565 µg/m2, respectively. Hands exhibited significantly higher ∑CPs concentrations than other skin areas, indicating that direct contact with indoor surfaces contributed considerable CP levels on this bare skin area. Gender differences in CP levels were observed in wipes from all locations, except for the hands, possibly because of the significant variability in residuals on the hands. A significant positive relationship was found between CP levels on the hands and faces, and the CP ratios of the hands/faces were related to log KOA. Bare skin showed more significant variations in CP partitioning among related congeners and between genders than skin covered by clothing, as elucidated by the linear analysis of RSD and log KOA. Although concentrations on clothing-covered areas were relatively lower than on bare skin, the median estimated dermal absorption doses of ∑SCCPs and ∑MCCPs (152 and 737 ng/kg bw/day, respectively) for the entire body were approximately 1-2 orders of magnitude higher than those for oral ingestion (1.62 and 7.94 ng/kg bw/day, respectively), emphasizing indirect dermal uptake as a significant exposure pathway for humans.

Human dermal exposure to short- and medium-chain chlorinated paraffins: Effect of populations, activities, gender, and haze pollution

Human dermal exposure to chlorinated paraffins (CPs) has not been well documented. Therefore, hand wipes were collected from four occupational populations to analyze short-chain CPs (SCCPs) and medium-chain CPs (MCCPs) in order to estimate dermal uptake and oral ingestion via hand-to-mouth contact. The total CP levels (∑SCCPs and ∑MCCPs) in wipes ranged from 71.4 to 2310 µg/m2 in security guards, 37.6 to 333 µg/m2 in taxi drivers, 20.8 to 559 µg/m2 in office workers, and 20.9 to 932 µg/m2 in undergraduates, respectively. Security guards exhibited the highest levels of ∑SCCPs among four populations (p < 0.01). In undergraduates engaged in outdoor activities, C13 emerged as the most dominant SCCPs homologue group, followed by C12, C11, and C10. The levels of ∑SCCPs and ∑MCCPs in males in light haze pollution were significantly higher than that in heavy haze pollution (p < 0.05). The median estimated dermal absorption dose of SCCPs and MCCPs via hand was 22.2 and 104 ng (kg of bw)-1 day-1, respectively, approximately 1.5 times the oral ingestion [12.3 and 74.4 ng (kg of bw)-1 day-1], suggesting that hand contact is a significant exposure source to humans.

Aromatic amine antioxidants (AAs) and p-phenylenediamines-quinones (PPD-Qs) in e-waste recycling industry park: Occupational exposure and liver X receptors (LXRs) disruption potential

Recently, evidence of aromatic amine antioxidants (AAs) existence in the dust of the electronic waste (e-waste) dismantling area has been exposed. However, there are limited studies investigating occupational exposure and toxicity associated with AAs and their transformation products (p-phenylenediamines-quinones, i.e., PPD-Qs). In this study, 115 dust and 42 hand wipe samples collected from an e-waste recycling industrial park in central China were analyzed for 19 AAs and 6 PPD-Qs. Notably, the median concentration of ∑6PPD-Qs (1,110 ng/g and 1,970 ng/m2) was significantly higher (p < 0.05, Mann-Whitney U test) than that of ∑6PPDs (147 ng/g and 34.0 ng/m2) in dust and hand wipes. Among the detected analytes, 4-phenylaminodiphenylamine quinone (DPPD-Q) (median: 781 ng/g) and 1,4-Bis(2-naphthylamino) benzene quinone (DNPD-Q) (median: 156 ng/g), were particularly prominent, which were first detected in the e-waste dismantling area. Occupational exposure assessments and nuclear receptor interference ability, conducted through estimated daily intake (EDI) and molecular docking analysis, respectively, indicated significant occupational exposure to PPD-Qs and suggested prioritized Liver X receptors (LXRs) disruption potential of PPDs and PPD-Qs. The study provides the first evidence of considerable levels of AAs and PPD-Qs in the e-waste-related hand wipe samples and underscores the importance of assessing occupational exposure and associated toxicity effects.

Detection of Bromochloro Alkanes in Indoor Dust Using a Novel CP-Seeker Data Integration Tool

Bromochloro alkanes (BCAs) have been manufactured for use as flame retardants for decades, and preliminary environmental risk screening suggests they are likely to behave similarly to polychlorinated alkanes (PCAs), subclasses of which are restricted as Stockholm Convention Persistent Organic Pollutants (POPs). BCAs have rarely been studied in the environment, although some evidence suggests they may migrate from treated-consumer materials into indoor dust, resulting in human exposure via inadvertent ingestion. In this study, BCA-C14 mixture standards were synthesized and used to validate an analytical method. This method relies on chloride-enhanced liquid chromatography-electrospray ionization-Orbitrap-high resolution mass spectrometry (LC-ESI-Orbitrap-HRMS) and a novel CP-Seeker integration software package for homologue detection and integration. Dust sample preparation via ultrasonic extraction, acidified silica cleanup, and fractionation on neutral silica cartridges was found to be suitable for BCAs, with absolute recovery of individual homologues averaging 66 to 78% and coefficients of variation ≤10% in replicated spiking experiments (n = 3). In addition, a total of 59 indoor dust samples from six countries, including Australia (n = 10), Belgium (n = 10), Colombia (n = 10), Japan (n = 10), Thailand (n = 10), and the United States of America (n = 9), were analyzed for BCAs. BCAs were detected in seven samples from the U.S.A., with carbon chain lengths of C8, C10, C12, C14, C16, C18, C24 to C28, C30 and C31 observed overall, though not detected in samples from any other countries. Bromine numbers of detected homologues in the indoor dust samples ranged Br1-4 as well as Br7, while chlorine numbers ranged Cl2-11. BCA-C18 was the most frequently detected, observed in each of the U.S.A. samples, while the most prevalent degrees of halogenation were homologues of Br2 and Cl4-5. Broad estimations of BCA concentrations in the dust samples indicated that levels may approach those of other flame retardants in at least some instances. These findings suggest that development of quantification strategies and further investigation of environmental occurrence and health implications are needed.

Biomonitoring, exposure routes and risk assessment of chlorinated paraffins in humans: a mini-review

Chlorinated paraffins (CPs), which were conventionally classified into short- (SCCPs), medium- (MCCPs) and long- (LCCPs) chain CPs, have received growing attention due to their wide usage and extensive detection in environmental samples and biota. The number of studies regarding the biomonitoring of CPs in human beings increased rapidly and their health risk gained great concern. This review summarized their occurrence and homologue patterns in human matrices including blood/serum, placenta, cord serum and breast milk. As the production and usage of SCCPs was progressively banned after being listed in Annex A of the Stockholm Convention, the production of MCCPs and LCCPs was stimulated. Accordingly, the ratio of MCCPs/SCCPs in human samples has increased rapidly in the last 5 years. The current understanding of exposure routes and risk assessments of CPs was also reviewed. Oral dietary intake is the most predominant source of daily CP intake, but dust ingestion, inhalation and dermal exposure is also nonnegligible, especially for MCCPs and LCCPs. Furthermore, the reported upper bound of the estimated daily intakes (EDIs) in various risk assessment studies was close to or exceeded the tolerable daily intakes (TDIs). Considering the bioaccumulation and long-lasting exposure of CPs, their health impacts on humans and the ecosystem required continuous monitoring and evaluation.

Short- and medium-chain chlorinated paraffins in T-shirts and socks

The short- and medium-chain chlorinated paraffins (SCCPs and MCCPs) are complex mixtures of persistent compounds used mainly as plastic additives. They can have a negative impact on human health as they are suspected of disrupting the endocrine system and being carcinogenic, which is why monitoring their presence in the human environment is desirable. Clothing was selected for this study because they are produced in large quantities worldwide and the final products are worn for long periods throughout the day, in direct contact with human skin. The concentrations of CPs in this type of sample have not been sufficiently reported. We determined SCCPs and MCCPs in 28 samples of T-shirts and socks by gas chromatography coupled with high-resolution mass spectrometry in negative chemical ionisation mode (GC-NCI-HRMS). CPs were found above the limits of quantification in all samples, with concentrations ranging from 33.9 to 5940 ng/g (mean 1260 ng/g, median 417 ng/g). The samples with a substantial proportion of synthetic fibres contained higher CP concentrations (22 times higher mean for SCCPs and 7 times higher mean for MCCPs) than garments composed exclusively of cotton. Finally, the effect of washing in the washing machine was investigated. The individual samples behaved differently: (i) excessively emitting CPs; (ii) being contaminated; (iii) retaining the original CP levels. The CP profiles also changed for some samples (with a substantial proportion of synthetic fibres and samples composed exclusively of cotton).

Homologue Composition of Technical Chlorinated Paraffins Used in Several Countries over the Last 50 Years─SCCPs Are Still Out There

Chlorinated paraffins (CPs) are widely produced chemicals, with certain CP subgroups facing global restrictions due to their environmental dispersion, persistence, bioaccumulation, and toxicity. To evaluate the effectiveness of these international restrictions, we assessed the homologue group contribution and the mass fraction of short-chain CPs (SCCPs: C10-C13), medium-chain CPs (MCCPs: C14-C17), and long-chain CPs (LCCPs: ≥C18) in 36 technical CP mixtures used worldwide over the last 50 years. Using low-resolution mass spectrometry (LC-ESI-MS/MS), we quantified 74 CP homologue groups (C10Cl4-C20Cl10). Additionally, high-resolution mass spectrometry (LC-ESI-QTOF-MS) screening was employed to identify unresolved CP contents, covering 375 CP homologue groups (C6Cl4-C30Cl30). Overall, 1 sample was mainly composed of Collapse

Key Words

• chemical additive
• chlorinated n-alkane
• flame retardant
• persistent organic pollutant
• plasticizer
• polychlorinated alkane
• suspect screening analysis

Collapse

MESH Headings

• Paraffin
• Tandem Mass Spectrometry
• Chromatography, Liquid

Collapse

Grants Collapse

Affiliation(s)

Yago Guida Material Cycles Division, National Institute for Environmental Studies, 16-2 Onogawa, Tsukuba 305-8506, Japan Universidade Federal do Rio de Janeiro, Instituto de Biofísica Carlos Chagas Filho, 21941-902 Rio de Janeiro, Brazil
Hidenori Matsukami Material Cycles Division, National Institute for Environmental Studies, 16-2 Onogawa, Tsukuba 305-8506, Japan
Gabriel Oliveira de Carvalho Universidade Federal do Rio de Janeiro, Instituto de Biofísica Carlos Chagas Filho, 21941-902 Rio de Janeiro, Brazil
Roland Weber POPs Environmental Consulting, 73527 Schwäbisch Gmünd, Germany
Walter Vetter Institute of Food Chemistry (170b), University of Hohenheim, DE-70593 Stuttgart, Germany
Natsuko Kajiwara Material Cycles Division, National Institute for Environmental Studies, 16-2 Onogawa, Tsukuba 305-8506, Japan

Collapse

Collaborators Collapse

Chlorinated paraffins in multimedia during residential interior finishing: Occurrences, behavior, and health risk

Though with bioaccumulation and toxicity, chlorinated paraffins (CPs) are still high produced and widely utilized in various daily necessities for extender plasticization and flame retardation. CPs can be released during the reprocessing processes of finishing materials and distributed in multi-environmental media. Herein, concentrations and compositions of CPs in four representative media including interior finishing materials, PM10, total suspended particulate (TSP), and dust samples collected from eight interior finishing stages were studied. Unexpectedly, CP concentrations in ceramic tiles was found to be high with a mean value of 7.02 × 103 μg g-1, which could be attributed to the presence of CPs in the protective wax coated on ceramic tiles surfaces. Furthermore, the pollution characteristics of short-chain and medium-chain CPs (SCCPs and MCCPs) in those samples were inconsistent. According to the investigation regarding Kdust-TSP and [Formula: see text] , the occurrence and distribution of CPs in indoor atmospheric particles (PM10 and TSP) and dust were highly affected by reprocessing processes (cutting, hot melting, etc.) compared to that in the finishing materials. Moreover, dermal contact was the primary pathway of CP exposure for the occupational population (interior construction workers) for most interior finishing stages, and the interior finishing process is the prime CP exposure period for the occupational groups. As suggested by our assessment, though hardly posing an immediate health risk, CPs exposure still presents unneglected adverse health effects, which calls for adequate personal protections during interior finishing, especially in developing countries.

Concentrations and homologue patterns of SCCPs and MCCPs in the serum of the general population of adults in Hangzhou, China

Due to their ubiquitous presence in the environment and humans, chlorinated paraffins (CPs) are a major environmental and public health concern. CPs are known to persist, bioaccumulate and potentially threaten human health, but reports on their internal exposure in the adult general population are still scarce. In this study, serum samples collected from adults living in Hangzhou, China, were quantified for SCCPs and MCCPs using GC-NCI-MS methods. A total of 150 samples were collected and subjected to analysis. ∑SCCPs were detected in 98% of the samples with a median concentration of 721 ng/g lw. MCCPs were found in all serum samples with a median concentration of 2210 ng/g lw, indicating that MCCPs were the dominant homologous group. For SCCPs and MCCPs, ∑C₁₀ and ∑C₁₄ were found to be the dominant carbon chain length homologues. Our results showed that age, BMI and lifestyle were not found to be significantly associated with internal exposure to CPs for the samples in this study. Based on PCA analysis, an age-specific distribution of CP homologues was observed. This suggests that internal exposure to CPs in the general population is related to exposure scenarios and history. The results of this study may contribute to a better understanding of the internal exposure to CPs in the general population and may provide a direction for the investigation of the source of exposure to CPs in the environment and daily life.

Widespread presence of chlorinated paraffins in consumer products

Short-chain chlorinated paraffins (SCCPs) were listed for elimination under the Stockholm Convention in 2017 due to their persistence and toxicity. Although Canada and other Stockholm signatories have prohibited the manufacture, usage and import of SCCPs since 2013, they can still be detected at high concentrations in indoor dust. To identify the sources of the SCCPs in the Canadian indoor environment, short-, medium- and long-chain chlorinated paraffins (SCCPs, MCCPs, LCCPs, respectively) were measured using a sensitive LC-ESI-orbitrap method. SCCPs were detected in 84 of the 96 products purchased in Canada after 2013 (87.5%) including electronic devices, clothing, plastics (toys), and paintings. Concentrations of SCCPs were up to 0.93% (9.34 mg g^-1). SCCPs were also detected in newly purchased toys at 0.005-2.02 mg g^-1, indicating the potential for children's exposure. Profiles of chlorinated paraffins differed among categories of products. For example, C₁₃-SCCPs were most common in toys, while electronic devices like headphones showed comparable concentrations of SCCPs and MCCPs. Additionally, four new carboxylate derivatives of CPs were detected in an electronic device sample. These are the first data to show the ubiquitous occurrences of SCCPs in a wide range of products currently marketed in Canada, suggesting continuing indoor exposure to SCCPs despite their prohibition.

The potential health risks of short-chain chlorinated paraffin: A mini-review from a toxicological perspective

Short-chain chlorinated paraffins (SCCPs) are ubiquitously distributed in various environmental matrics due to their wide production and consumption globally in the past and ongoing production and use in some developing countries. SCCPs have been detected in various human samples including serum, milk, placenta, nail, and hair, and internal SCCP levels were found to be positively correlated with biomarkers of some diseases. While the environmental occurrence has been reported in a lot of studies, the toxicity and underlying molecular mechanisms of SCCPs remain largely unknown. The current tolerable daily intakes (TDIs) recommended by the world health organization/international programme on chemical safety (WHO/IPCS, 100 μg/kg bw/d) and the UK Committee on Toxicity (COT, 30 μg/kg bw/d) were obtained based on a no observed adverse effect level (NOAEL) of SCCP from the repeated-dose study (90 d exposure) in rodents performed nearly 40 years ago. Importantly, the health risks assessment of SCCPs in a variety of studies has shown that the estimated daily intakes (EDIs) may approach and even over the established TDI by UK COT. Furthermore, recent studies revealed that lower doses of SCCPs could also result in damage to multiple organs including the liver, kidney, and thyroid. Long-term effects of SCCPs at environmental-related doses are warranted.

Percutaneous Penetration of Liquid Crystal Monomers (LCMs) by In Vitro Three-Dimensional Human Skin Equivalents: Possible Mechanisms and Implications for Human Dermal Exposure Risks

Liquid crystal monomers (LCMs) are indispensable materials in liquid crystal displays, which have been recognized as emerging persistent, bioaccumulative, and toxic organic pollutants. Occupational and nonoccupational exposure risk assessment suggested that dermal exposure is the primary exposure route for LCMs. However, the bioavailability and possible mechanisms of dermal exposure to LCMs via skin absorption and penetration remain unclear. Herein, we used EpiKutis 3D-Human Skin Equivalents (3D-HSE) to quantitatively assess the percutaneous penetration of nine LCMs, which were detected in e-waste dismantling workers' hand wipes with high detection frequencies. LCMs with higher log K_ow and greater molecular weight (MW) were more difficult to penetrate through the skin. Molecular docking results showed that ABCG2 (an efflux transporter) may be responsible for percutaneous penetration of LCMs. These results suggest that passive diffusion and active efflux transport may be involved in the penetration of LCMs across the skin barrier. Furthermore, the occupational dermal exposure risks evaluated based on the dermal absorption factor suggested the underestimation of the continuous LCMs' health risks via dermal previously.

In Vivo Profiling and Quantification of Chlorinated Paraffin Homologues in Living Fish

Herein, we demonstrate the ability of a dual-purpose periodic mesoporous organosilica (PMO) probe to track the complex chlorinated paraffin (CP) composition in living animals by assembling it as an adsorbent-assisted atmospheric pressure chemical ionization Fourier-transform ion cyclotron resonance mass spectrometry (APCI-FT-ICR-MS) platform and synchronously performing it as the in vivo sampling device. First, synchronous solvent-free ionization and in-source thermal desorption of CP homologues were achieved by the introduction of the PMO adsorbent-assisted APCI module, generating exclusive adduct ions ([M - H]^-) of individual CP homologues (C_nCl_m) with enhanced ionization efficiency. Improved detection limits of short- and medium-chain CPs (0.10-24 and 0.48-5.0 pg/μL) were achieved versus those of the chloride-anion attachment APCI-MS methods. Second, the dual-purpose PMO probe was applied to extract the complex CP compositions in living animals, following APCI-FT-ICR-MS analysis. A modified pattern-deconvolution algorithm coupled with the sampling-rate calibration method was used for the quantification of CPs in living fish. In vivo quantification of a tilapia exposed to technical CPs for 7 days was successfully achieved, with ∑SCCPs and ∑MCCPs of the sampled fish calculated to be 1108 ± 289 and 831 ± 266 μg/kg, respectively. Meanwhile, 58 potential CP metabolites were identified in living fish for the first time during in vivo sampling of CPs, a capacity that could provide an important tool for future study regarding its expected risks to humans and its environmental fate.

Understanding inter-individual variability in short-chain chlorinated paraffin concentrations in human blood

Chlorinated paraffins (CPs), particularly short-chain CPs (SCCPs), have been reported in human blood with high detection frequency and often high variation among individuals. However, factors associated with and their contributions to inter-individual variability in SCCP concentrations in human blood have not been assessed. In this study, we first measured SCCP concentrations in 57 human blood samples collected from individuals living in the same vicinity in China. We then used the PROduction-To-Exposure model to investigate the impacts of variations in sociodemographic data, biotransformation rates, dietary patterns, and indoor contamination on inter-individual variability in SCCP concentrations in human blood. Measured ∑SCCP concentrations varied by a factor of 10 among individuals with values ranging from 122 to 1230 ng/g, wet weight. Model results show that age, sex, body weight, and dietary composition played a minor role in causing variability in ∑SCCP concentrations in human blood given that modeled ∑SCCP concentrations ranged over a factor of 2 - 3 correlated to the variations of these factors. In contrast, variations in the modeled ΣSCCP concentrations increased to factors of 6 and 8 when variability in biotransformation rates and indoor contamination were considered, respectively, indicating these two factors could be the most influential on inter-individual variability in SCCP concentrations in human blood.

Evaluating the dynamic distribution process and potential exposure risk of chlorinated paraffins in indoor environments of Beijing, China

Chlorinated paraffins (CPs) are typical semi-volatile chemicals (SVOCs) that have been used in copious quantities in indoor material additives. SVOCs distribute dynamically between the gas phase and various condensate phases, especially organic films. Investigating the dynamic behaviors of existing CPs in indoor environments is necessary for understanding their potential risk to humans from indoor exposure. We investigate the distribution profiles of CPs in both gas phase and organic films in indoor environments of residential buildings in Beijing, China. The concentrations of CPs were in the range of 32.21-1447 ng/m³ in indoor air and in the range of 42.30-431.1 μg/m² and in organic films. Cooking frequency was identified as a key factor that affected the distribution profiles of CPs. Furthermore, a film/gas partitioning model was constructed to explore the transportation and fate of CPs. Interestingly, a re-emission phenomenon from organic films was observed for chemical groups with lower log K_oa components, and, importantly, their residue levels in indoor air were well predicted. The estimated exposure risk of CPs in indoor environment was obtained. For the first time, these results produced convincing evidence that the co-exposure risk of short-chain CPs (SCCPs), medium-chain CPs (MCCPs), and long-chain CPs (LCCPs) in indoor air could be further increased by film/gas distribution properties, which is relevant for performing risk assessments of exposure to these SVOCs in indoor environments.

Characterization of different contaminants and current knowledge for defining chemical mixtures in human milk: A review

Hundreds of xenobiotics, with very diverse origins, have been detected in human milk, including contaminants of emerging concern, personal care products and other current-use substances reflecting lifestyle. The routes of exposure to these chemicals include dermal absorption, ingestion and inhalation. Specific families of chemicals are dominant among human milk monitoring studies (e.g., organochlorine pesticides, bisphenol A, dioxins), even though other understudied families may be equally toxicologically relevant (e.g., food-processing chemicals, current-use plasticizers and flame retardants, mycotoxins). Importantly, the lack of reliable human milk monitoring data for some individual chemicals and, especially, for complex mixtures, is a major factor hindering risk assessment. Non-targeted screening can be used as an effective tool to identify unknown contaminants of concern in human milk. This approach, in combination with novel methods to conduct risk assessments on the chemical mixtures detected in human milk, will assist in elucidating exposures that may have adverse effects on the development of breastfeeding infants.

Dietary Intake Contributed the Most to Chlorinated Paraffin Body Burden in a Norwegian Cohort

Determining the major human exposure pathways is a prerequisite for the development of effective management strategies for environmental pollutants such as chlorinated paraffins (CPs). As a first step, the internal and external exposure to CPs were quantified for a well-defined human cohort. CPs in participants' plasma and diet samples were analyzed in the present study, and previous results on paired air, dust, and hand wipe samples were used for the total exposure assessment. Both one compartment pharmacokinetic modeling and forensic fingerprinting indicate that dietary intake contributed the most to body burden of CPs in this cohort, contributing a median of 60-88% of the total daily intakes. The contribution from dust ingestion and dermal exposure was greater for the intake of long-chain CPs (LCCPs) than short-chain CPs (SCCPs), while the contribution from inhalation was greater for the intake of SCCPs than medium-chain CPs (MCCPs) and LCCPs. Significantly higher concentrations of SCCPs and MCCPs were observed in diets containing butter and eggs, respectively (p < 0.05). Additionally, other exposure sources were correlated to plasma levels of CPs, including residence construction parameters such as the construction year (p < 0.05). This human exposure to CPs is not a local case. From a global perspective, there are major knowledge gaps in biomonitoring and exposure data for CPs from regions other than China and European countries.

E-waste dismantling-related occupational and routine exposure to melamine and its derivatives: Estimating exposure via dust ingestion and hand-to-mouth contact

Melamine (MEL) and its derivatives are increasingly applied as nitrogenous flame retardants in consumer products. Nevertheless, limited information is available on their environmental occurrence and subsequent human exposure via multiple exposure pathways. In this study, we analysed MEL and its derivatives in dust (indication of the dust ingestion route) and hand wipe samples (indication of the hand-to-mouth route) collected in various microenvironments. The levels of ∑MELs in both dust (median: 24,100 ng/g) and participant hand samples (803 ng/m²) collected in e-waste dismantling workshops were significantly higher than those in samples collected in homes (15,600 ng/g and 196 ng/m², respectively), dormitories (13,100 ng/g and 227 ng/m², respectively) and hotel rooms (11,800 ng/g and 154 ng/m², respectively). Generally, MEL dominated in dust samples collected in e-waste dismantling workshops, whereas cyanuric acid dominated in hand wipe samples. This may occur partly because the latter is an ingredient in disinfection products, which are more frequently employed in daily lives during the COVID-19 pandemic. Exposure assessment suggests that dust ingestion is an important exposure pathway among dismantling workers and the general population, whereas hand-to-mouth contact could not be overlooked in certain populations, such as children and dismantling workers not wear gloves at work.

The Next Frontier of Environmental Unknowns: Substances of Unknown or Variable Composition, Complex Reaction Products, or Biological Materials (UVCBs)

Substances of unknown or variable composition, complex reaction products, or biological materials (UVCBs) are over 70 000 "complex" chemical mixtures produced and used at significant levels worldwide. Due to their unknown or variable composition, applying chemical assessments originally developed for individual compounds to UVCBs is challenging, which impedes sound management of these substances. Across the analytical sciences, toxicology, cheminformatics, and regulatory practice, new approaches addressing specific aspects of UVCB assessment are being developed, albeit in a fragmented manner. This review attempts to convey the "big picture" of the state of the art in dealing with UVCBs by holistically examining UVCB characterization and chemical identity representation, as well as hazard, exposure, and risk assessment. Overall, information gaps on chemical identities underpin the fundamental challenges concerning UVCBs, and better reporting and substance characterization efforts are needed to support subsequent chemical assessments. To this end, an information level scheme for improved UVCB data collection and management within databases is proposed. The development of UVCB testing shows early progress, in line with three main methods: whole substance, known constituents, and fraction profiling. For toxicity assessment, one option is a whole-mixture testing approach. If the identities of (many) constituents are known, grouping, read across, and mixture toxicity modeling represent complementary approaches to overcome data gaps in toxicity assessment. This review highlights continued needs for concerted efforts from all stakeholders to ensure proper assessment and sound management of UVCBs.

Occurrence, Distribution, and Human Exposure of Emerging Liquid Crystal Monomers (LCMs) in Indoor and Outdoor Dust: A Nationwide Study

Liquid crystal monomers (LCMs) are a class of emerging, persistent, bioaccumulative, and toxic organic pollutants. They are detected in various environmental matrixes that are associated with electronic waste (e-waste) dismantling. However, their occurrence and distribution in indoor and outdoor dust on a national scale remain unknown. In this study, a dedicated target analysis quantified a broad range of 60 LCMs in dust samples collected across China. The LCMs were frequently detected in indoor (n = 48) and outdoor dust (n = 97; 37 sampled concomitantly with indoors dust) from dwellings, and indoor dust from cybercafés (n = 34) and phone repair stores (n = 22), with median concentrations of 41.6, 94.7, 106, and 171 ng/g, respectively. No significant spatial difference was observed for the concentrations of the total LCMs among distinct geographical regions (p > 0.05). The median daily intake values of the total LCMs via dust ingestion, dermal contact, and inhalation were estimated at 1.50 × 10^-2, 2.90 × 10^-2, and 8.57 × 10^-6 ng/kg BW/day for adults and 1.47 × 10^-1, 1.22 × 10^-1, and 2.18 × 10^-5 ng/kg BW/day for children, respectively. These estimates suggested higher exposure risks for children and indicated that dust ingestion and dermal contact significantly contribute to the human intake of LCMs. The microenvironmental pollution levels of LCMs together with the potential exposure risks associated with some of these chemicals are of concern for human health.

Identifying emerging environmental concerns from long-chain chlorinated paraffins towards German ecosystems

Germany is one of several major European producers of chlorinated paraffins (CPs). This study showed that not only the legacy short-chain products (SCCPs, C_10-13), but also the current-use medium- and long-chain products (MCCPs, C_14-17; LCCPs, C_>17) as well as the very-short-chain impurities (vSCCPs, C_<10) are ubiquitous in the 72 samples collected from the coastal, terrestrial, and freshwater ecosystems across the country. The concentrations of LCCPs surpassed those of the other CPs in 40% of the biota samples. Archived bream samples collected downstream of a CP-manufacturing factory showed decreasing temporal trends of (v)SCCPs and relatively constant levels of MCCPs from 1995 to 2019; however, the overall levels of LCCPs have increased by 290%, reflecting the impact of chemical regulation policies on changes in CP production. A visualization algorithm was developed for integrating CP results from various matrices to illustrate spatial tendencies of CP pollution. Higher levels of (v)SCCPs were indicated in the former West Germany region, while MCCP and LCCP concentrations did not seem to differ between former East and West Germany, suggesting relatively equal production and use of these chemicals after the German Reunification. The results provide an early warning signal of environmental concerns from LCCPs on the eve of their booming global production and use.

Electronic-Waste-Driven Pollution of Liquid Crystal Monomers: Environmental Occurrence and Human Exposure in Recycling Industrial Parks

Liquid crystal monomers (LCMs) in liquid crystal displays (LCDs) may be released into the environment, especially in electronic waste (e-waste) recycling industrial parks with a high pollution risk. However, little has been known about the environmental release and human exposure to LCMs until now. Herein, a total of 45 LCMs were detected in LCDs of commonly used smartphones and computers by high-resolution mass spectrometry with suspect screening analysis. Fluorinated biphenyls and their analogs were the dominant LCMs. Based on available standards of the screening results and previous studies, 55 LCMs were quantified in samples from an e-waste recycling industrial park in Central China. The LCMs were frequently detected in outdoor dust (n = 43), workshop #1 indoor dust (n = 53), and hand (n = 43) and forehead wipes (n = 43), with median concentrations of 6950 ng/g, 67,400 ng/g, 46,100 ng/m², and 62,100 ng/m², respectively. The median estimated daily intake values of the LCMs via dust ingestion and dermal absorption were 48.3 and 16.5 ng/kg body weight/day, respectively, indicating a high occupational exposure risk of these compounds. In addition, 16 LCMs were detected in the serum of eight elderly people (≥60 years old) with over 5 years of experience in e-waste dismantling operations, resulting in a total concentration range of 3.9-26.3 ng/mL.

Perfluoroalkyl acids in dust on residential indoor/outdoor window glass in Chinese cities: occurrence, composition, and toddler exposure

The dust on indoor and outdoor surfaces of the window glasses were collected using sterile cotton balls in 11 cities from China. Two sampling campaigns were conducted with the time interval of 7 days to investigate the accumulation especially during the Spring festival holidays. Twenty-nine perfluoroalkyl acids (PFAA) were quantified to investigate concentration, composition, and toddlers' exposure. The concentrations of ∑PFAA ranged from no detection (nd) to 43 ng/m2 (mean 8.9 ± 10 ng/m2). Perfluorobutanoic acid (PFBA) was detected in 78% samples and accounted for 55 ± 21% of ∑PFAA concentrations. 6:2 fluorotelomer sulfonic acid (6:2 FTSA) and hexafluoropropylene oxide dimer acid (HFPO-DA) were detected in more than 50% samples indicating the use of alternatives. Fluorotelomer carboxylic acid (FTCA) and fluorotelomer unsaturated acid (FTUCA) were found in the dust, implying the degradation of fluorotelomer alcohols (FTOH). The highest concentration of ∑PFAA (43 ng/m2) was found in outdoor dust from Xinzhou, Shanxi Province. Higher ∑PFAA concentrations were found in indoor dust than outdoor in 6 paired samples (3 from Feb. 14 and 3 from Feb. 21). In Tianjin and Handan, the concentrations of ∑PFAA from outdoor surfaces were higher in sampling campaign I (SC I, Feb. 21) than in sampling campaign II (SC II, Feb. 14), implying intensive outdoor release. The exposure of 2-year-old toddlers to PFAA via hand-to-mouth ingestion and dermal absorption was estimated; the mean values of intake were 2.1 and 1.5 pg/kg body weight, respectively, assuming an exposure time of 1 h.

An Overview of Chemical Additives on (Micro)Plastic Fibers: Occurrence, Release, and Health Risks

Plastic fibers are ubiquitous in daily life with additives incorporated to improve their performance. Only a few restrictions exist for a paucity of common additives, while most of the additives used in textile industry have not been clearly regulated with threshold limits. The production of synthetic fibers, which can shed fibrous microplastics easily (< 5 mm) through mechanical abrasion and weathering, is increasing annually. These fibrous microplastics have become the main composition of microplastics in the environment. This review focuses on additives on synthetic fibers; we summarized the detection methods of additives, compared concentrations of different additive types (plasticizers, flame retardants, antioxidants, and surfactants) on (micro)plastic fibers, and analyzed their release and exposure pathways to environment and human beings. Our prediction shows that the amounts of predominant additives (phthalates, organophosphate esters, bisphenols, per- and polyfluoroalkyl substances, and nonylphenol ethoxylates) released from clothing microplastic fibers (MFs) are estimated to reach 35, 10, 553, 0.4, and 568 ton/year to water worldwide, respectively; and 119, 35, 1911, 1.4, and 1965 ton/year to air, respectively. Human exposure to MF additives via inhalation is estimated to be up to 4.5–6440 µg/person annually for the above five additives, and via ingestion 0.1–204 µg/person. Notably, the release of additives from face masks is nonnegligible that annual human exposure to phthalates, organophosphate esters, per- and polyfluoroalkyl substances from masks via inhalation is approximately 491–1820 µg/person. This review helps understand the environmental fate and potential risks of released additives from (micro)plastic fibers, with a view to providing a basis for future research and policy designation of textile additives.

Overlooked long-chain chlorinated paraffin (LCCP) contamination in foodstuff from China

Data on long-chain chlorinated paraffins (LCCPs) is extremely sparse, despite their use and emission are increasing with the phasing out of short-chain chlorinated paraffins (SCCPs). In this study, we analyzed chlorinated paraffins (CPs) in foodstuff samples (551 pooled samples, 93 items) divided into eight categories collected from Jinan, Shandong Province of China, by atmospheric-pressure chemical ionization quadrupole time-of-flight mass spectrometry (APCI-qToF-MS), to investigate the occurrence, contamination patterns and homologue patterns of LCCPs in foodstuff commonly consumed in traditional Chinese diet. LCCP intake through diet was estimated as well. LCCPs were detected in all pooled samples with geometric mean (GM) concentrations ranging from 1.8 to 21.9 ng/g wet weight (ng/g ww), contributing to 9-28% of the total CP mass in the studied foodstuff categories. The contamination patterns of LCCPs differed from SCCPs and medium-chain chlorinated paraffins (MCCPs), as reflected by the patterns of mass distribution, and by the lack of correlations between LCCP and S/MCCP concentrations in various foodstuff categories. The homologue profiles of LCCPs were extremely complex and diverse, with frequent detection of C_30-36Cl_2-15 very-long-chain chlorinated paraffin (vLCCP) congeners. The homologue profiles of eggs stood out for their high abundance of C_18-22Cl_9-13 LCCP congeners. LCCPs contributed 6.0-25.2% (8.9% for median estimation) to the estimated dietary intake (EDI) for total CPs through diet based on estimations using different percentiles of CP concentrations. The median estimate of dietary LCCP intake for adults in Jinan was 287.9 ng/kg_bw/day, reaching ~10- to 100-fold of that in Sweden and Canada. Considering the continuing production, use and emission of LCCPs, as well as the similar toxicity effects induced by LCCPs as SCCPs and MCCPs, attention should be paid to the health risk posed by LCCPs, or all CPs as a class of contaminants.

Assessing exposure of semi-volatile organic compounds (SVOCs) in car cabins: Current understanding and future challenges in developing a standardized methodology

Semi-volatile organic compounds (SVOCs) can be found in air, dust and on surfaces in car cabins, leading to exposure to humans via dust ingestion, inhalation, and dermal contact. This review aims at describing current understanding concerning sampling, levels, and human exposure of SVOCs from car cabin environments. To date, several different methods are used to sample SVOCs in car cabin air and dust and there are no standard operating procedures for sampling SVOCs in cars detailed in the literature. The meta-analysis of SVOCs in car cabin air and dust shows that brominated flame retardants (BFRs) and organophosphate flame retardants (OPFRs) have been most frequently studied, primarily focusing on concentrations in dust. In dust, detected concentrations span over three to seven orders of magnitude, with highest median concentrations for OPFRs, followed by BFRs and, thereafter, polychlorinated biphenyls (PCBs). In air, the variation is smaller, spanning over one to three orders of magnitude, with phthalates and siloxanes having the highest median concentrations, followed by OPFRs, fluorotelomer alcohols (FTOHs) and BFRs. Assessments of human exposures to SVOCs in cars have, so far, mainly focused on external exposure, most often only studying one exposure route, primarily via dust ingestion. In order to perform relevant and complete assessments of human exposure to SVOCs in cars, we suggest broadening the scope to which SVOCs should be studied, promoting more comprehensive external exposure assessments that consider exposure via all relevant exposure routes and making comparisons of external and internal exposure, in order to understand the importance of in-car exposure as a source of SVOC exposure. We also suggest a new sampling approach that includes sampling of SVOCs in both car cabin air and dust, aiming to reduce variability in data due to differences in sampling techniques and protocols.

The effect of anthropogenic activities on the environmental fate of chlorinated paraffins in surface soil in an urbanized zone of northern China

Chlorinated paraffins (CPs) have been widely used as halogenated flame retardants and plasticizers since the mid-20th century. The prevalence of CPs in soil has been widely reported, but the distribution pattern of CPs in urbanized zones and their association with multiple socioeconomic variables have not been adequately explored. Herein, short-chain and medium-chain chlorinated paraffins (SCCPs and MCCPs) were investigated in surface soil samples from Tianjin, China, a typical urbanized area. The concentration distributions of SCCPs and MCCPs showed similar trends in different administrative divisions and land use types: urban areas > suburbs > outer suburbs (p < 0.001) and residential areas > greenbelts > agricultural areas (p < 0.001). The CP congeners in residential surface soils mainly included those with longer carbon chains and high degree of chlorination, while the CP congeners in agricultural surface soils mainly consisted of those with shorter carbon chains and fewer chlorine substituents. Multiple statistical approaches were used to explore the association between socioeconomic factors and CP distribution. CP concentration was significantly correlated to population density and gross domestic product (GDP) (p < 0.001), and structural equation models incorporating administrative regional planning showed an indirect impact on the distribution of MCCP concentration due to the influence of regional planning on population density. These results highlight the association between CP contamination and the degree of urbanization, and this paper provides useful information toward mitigating the exposure risk of CPs for urban inhabitants.

Guidance on the Application of Polyurethane Foam Disk Passive Air Samplers for Measuring Nonane and Short-Chain Chlorinated Paraffins in Air: Results from a Screening Study in Urban Air

This study provides guidance on using polyurethane foam-based passive air samplers (PUF-PASs) for atmospheric nonane chlorinated paraffins (C₉-CPs) and short-chain CPs (SCCPs) and reports SCCP concentrations in air in the Greater Toronto Area (GTA), Canada. We estimated the partition coefficients between PUF and air (K_PUF-A) and between octanol and air (K_OA) for C₉-CP and SCCP congeners using the COSMO-RS method, so that PUF disk uptake profiles for each formula group could be calculated. We then measured SCCP concentrations in PUF disk samples collected from distinct source sectors in urban air across the GTA. Concentrations in samplers were used to calculate C₉-CP and SCCP concentrations in air and the PUF disk uptake profiles revealed that time-weighted linear phase sampling was possible for congeners having log K_OA values greater than 8.5. The highest SCCP concentrations, with an annual average concentration of 35.3 ng/m³, were measured at the industrial site, whereas lower but comparable SCCP concentrations were found in residential and background sites, with annual averages of 7.73 and 10.5 ng/m³, respectively. No consistent seasonal variation in SCCP concentrations was found in the six distinct source sectors. Direct measurements of K_PUF-A and K_OA values as a function of temperature could be used to increase accuracy in future studies.

Percutaneous penetration and dermal exposure risk assessment of chlorinated paraffins

The widespread occurrence of chlorinated paraffins (CPs) in environmental matrices has resulted in a high frequency exposure to CPs via dermal contact. To quantitatively estimate percutaneous penetration of CPs, Episkin® human skin equivalents (HSE) was applied as an in vitro model to evaluate the mechanism of percutaneous penetration of CPs. The co-exposure of CPs mixtures to HSE showed that about 11.7% and 10.2% of short-chain CPs (SCCPs) and medium-chain CPs (MCCPs) could penetrate the HSE and enter the receptor fluid, while no long-chain CPs (LCCPs) (C>17) were able to penetrate the HSE during the 36-h assay period. The experimentally obtained permeability coefficient (K_p) values for CPs were significantly (p < 0.01) negatively correlated with their log octanol-water partition coefficient (log K_ow). Furthermore, 24 participants were recruited to assess direct human dermal exposure to CPs in China with the total CPs collected onto hand wipes and forehead wipes being 96,600 and 30,400 ng/person, respectively. The proportion of total SCCPs and MCCPs intake via dermal penetration (skin area investigated in this study) accounting for 2.0% of the total intake of CPs. Considering the total skin surface of human body is around 20 times of the area studied, the total intake of CPs through dermal penetration could be a significant exposure pathway.

Chlorinated paraffins and tris (1-chloro-2-propyl) phosphate in spray polyurethane foams - A source for indoor exposure?

In this study, we investigated chemical additives present in new and used spray polyurethane foams (SPFs) and assessed the dermal transfer through direct contact. This first study shows that cured do-it-yourself spray one-component SPFs (OCFs) often contain chlorinated paraffins (C₁₄-C₃₇), and tris (1-chloro-2-propyl) phosphate (TCIPP), ranging 0.2-50%, and 0.9-30% w/w, respectively. Six OCFs contained CP levels ranging 22-50% w/w, whereas nine OCFs used for similar applications only contained CP levels ranging 2-17% w/w. It is unclear if the combination CPs/TCIPP is meant to improve the flame retardancy of products, and could suggest an unnecessary use of high CPs/TCIPP concentrations in OCFs. The two-component SPFs (TCFs) contained only TCIPP with levels ranging from 7.0% to 9.0%. The CPs and TCIPP were easily transferred from cured OCFs to the hands. Levels up to 590 µg per hand for CPs and up to 2.7 µg per hand for TCIPP were found. After end-of-life, it is challenging to recycle used SPFs. They may, therefore, end up at landfills where the TCIPP/CPs may leach into the environment. Therefore, further investigation is needed to assess potential exposure risks associated with general and occupational use, and the impact of landfill leaching on the environment.

Male renal functions are associated with serum short- and medium-chain chlorinated paraffins in residents from Jinan, China

BACKGROUND

Chlorinated paraffins (CPs) are contaminants ubiquitously detected in environmental samples, and reports addressing CPs in human samples are expanding. While CP exposure was suggested to impair kidney function by in vivo/in vitro experiments, epidemiological evidence is lacking.

OBJECTIVE

To examine the associations between serum total short-chain CP and medium-chain CP concentrations (∑SCCPs and ∑MCCPs) with human kidney function.

METHODS

The study samples were obtained from 387 participants living in Jinan, North China. We quantified ∑SCCPs and ∑MCCPs in serum samples and evaluated the kidney function of included subjects by estimated glomerular filtration rate (eGFR). The associations between serum ∑SCCPs, ∑MCCPs and eGFR were estimated using multivariable linear regression and logistic regression. The possible gender-dependent effects were studied by stratified analysis.

RESULTS

After adjusting for age, education, smoking status, drinking status, body mass index (BMI), family history of chronic kidney disease (CKD), fasting serum glucose, systolic blood pressure and diastolic blood pressure, higher concentrations of serum ∑SCCPs and ∑MCCPs were associated with higher male eGFR (β = 3.13 mL/min/1.73 m² per one ln-unit increase of serum ∑SCCPs, 95%CI: 1.72, 4.54, p = 0.016; β = 3.52 mL/min/1.73 m² per one ln-unit increase of serum ∑MCCPs, 95%CI: 1.89, 5.17, p = 0.011). Associations between serum ∑SCCPs, ∑MCCPs and female eGFR were null. Comparing higher (above the median serum CP levels) vs. lower exposure groups, serum ∑SCCPs and ∑MCCPs were associated with an elevated risk of glomerular hyperfiltration (GH, eGFR ≥ 135 mL/min/1.73 m²), which was associated with glomerular damage and represented as an early stage of chronic kidney disease (OR = 2.98; 95% CI: 1.24, 4.71 for SCCPs; OR = 3.25; 95% CI: 1.20, 5.29 for MCCPs).

CONCLUSIONS

Our study suggests that male serum ∑SCCPs and ∑MCCPs are associated with an increased risk of GH, indicating early-stage kidney impairment.

Short- and Medium-Chain Chlorinated Paraffins in Polyvinylchloride and Rubber Consumer Products and Toys Purchased on the Belgian Market

This study investigates the presence of Stockholm Convention listed short-chain chlorinated paraffins (SCCPs) and their replacement medium-chain chlorinated paraffins (MCCPs) counterparts in polyvinyl chloride and rubber consumer products and toys purchased on the Belgian market in 2019. SCCPs were detected in 27/28 samples at concentrations ranging from <LOQ-130,000 µg/g with a median level of 2.5 µg/g, while MCCPs were detected in only five samples ranging <LOQ-3500 µg/g. Levels of SCCPs in all but one of the samples were below the European Union's guideline limit of 0.15%, by weight, and concentrations of both SCCPs and MCCPs in the majority of products suggested unintentional incorporation to the polymeric materials. The homologue distribution of SCCPs was generally dissimilar to known commercial formulations and appeared to be indicative of contamination during manufacture or via recycling of previously treated goods. MCCP patterns, conversely, were broadly representative of those reported for industrial mixtures and may have been inadvertently incorporated via the application of mixed carbon-chain length CP formulations or recycled goods. This research suggests that overall SCCP presence has decreased in goods on the European market compared with previous reports and that both SCCPs and MCCPs may still enter EU marketplaces from unintentional sources.

Human Exposure to Chlorinated Paraffins via Inhalation and Dust Ingestion in a Norwegian Cohort

Very-short- (vSCCPs, C_6-9), short- (SCCPs, C_10-13), medium- (MCCPs, C_14-17), and long-chain chlorinated paraffins (LCCPs, C_>17) were analyzed in indoor air and dust collected from the living rooms and personal 24 h air of 61 adults from a Norwegian cohort. Relatively volatile CPs, i.e., vSCCPs and SCCPs, showed a greater tendency to partition from settled indoor dust to paired stationary indoor air from the same living rooms than MCCPs and LCCPs, with median logarithmic dust-air partition ratios of 1.3, 2.9, 4.1, and 5.4, respectively. Using the stationary indoor air and settled indoor dust concentrations, the combined median daily exposures to vSCCPs, SCCPs, MCCPs, and LCCPs were estimated to be 0.074, 2.7, 0.93, and 0.095 ng/kg bw/d, respectively. Inhalation was the predominant exposure pathway for vSCCPs (median 99%) and SCCPs (59%), while dust ingestion was the predominant exposure pathway for MCCPs (75%) and LCCPs (95%). The estimated inhalation exposure to total CPs was ∼ 5 times higher when the personal 24 h air results were used rather than the corresponding stationary indoor air results in 13 paired samples, indicating that exposure situations other than living rooms contributed significantly to the overall personal exposure. The 95^th percentile exposure for CPs did not exceed the reference dose.

Organohalogen compounds of emerging concern in Baltic Sea biota: Levels, biomagnification potential and comparisons with legacy contaminants

While new chemicals have replaced major toxic legacy contaminants such as polychlorinated biphenyls (PCBs) and dichlorodiphenyltrichloroethane (DDT), knowledge of their current levels and biomagnification potential in Baltic Sea biota is lacking. Therefore, a suite of chemicals of emerging concern, including organophosphate esters (OPEs), short-chain, medium-chain and long-chain chlorinated paraffins (SCCPs, MCCPs, LCCPs), halogenated flame retardants (HFRs), and per- and polyfluoroalkyl substances (PFAS), were analysed in blue mussel (Mytilus edulis), viviparous eelpout (Zoarces viviparus), Atlantic herring (Clupea harengus), grey seal (Halichoerus grypus), harbor seal (Phoca vitulina), harbor porpoise (Phocoena phocoena), common eider (Somateria mollissima), common guillemot (Uria aalge) and white-tailed eagle (Haliaeetus albicilla) from the Baltic Proper, sampled between 2006 and 2016. Results were benchmarked with existing data for legacy contaminants. The mean concentrations for ΣOPEs ranged from 57 to 550 ng g^-1 lipid weight (lw), for ΣCPs from 110 to 640 ng g^-1 lw for ΣHFRs from 0.42 to 80 ng g^-1 lw, and for ΣPFAS from 1.1 to 450 ng g^-1 wet weight. Perfluoro-4-ethylcyclohexanesulfonate (PFECHS) was detected in most species. Levels of OPEs, CPs and HFRs were generally similar or higher than those of polybrominated diphenyl ethers (PBDEs) and/or hexabromocyclododecane (HBCDD). OPE, CP and HFR concentrations were also similar to PCBs and DDTs in blue mussel, viviparous eelpout and Atlantic herring. In marine mammals and birds, PCB and DDT concentrations remained orders of magnitude higher than those of OPEs, CPs, HFRs and PFAS. Predator-prey ratios for individual OPEs (0.28-3.9) and CPs (0.40-5.0) were similar or somewhat lower than those seen for BDE-47 (5.0-29) and HBCDD (2.4-13). Ratios for individual HFRs (0.010-37) and PFAS (0.15-47) were, however, of the same order of magnitude as seen for p,p'-DDE (4.7-66) and CB-153 (31-190), indicating biomagnification potential for many of the emerging contaminants. Lack of toxicity data, including for complex mixtures, makes it difficult to assess the risks emerging contaminants pose. Their occurence and biomagnification potential should trigger risk management measures, particularly for MCCPs, HFRs and PFAS.

Addressing Main Challenges Regarding Short- and Medium-Chain Chlorinated Paraffin Analysis Using GC/ECNI-MS and LC/ESI-MS Methods

The risk assessment of chlorinated paraffins (CPs), chemicals of widespread industrial use, is struggling without standardized analytical methods to obtain reliable occurrence data. Indeed, scientists face analytical challenges that hinder the comparability of analytical methods, among them uncontrolled ionization efficiency and lack of quantification standards. In this study, our goal was to investigate potential issues faced when comparing data from different mass spectrometry platforms and quantification methods. First, the injection of the same set of single-chain length standards in three different instrumental mass spectrometry set-ups (liquid chromatography-electrospray-Orbitrap (LC/ESI-HRMS), liquid chromatography-electrospray-time-of-flight (LC/ESI-MS), and gas chromatography-electron capture negative ion-Orbitrap (GC/ECNI-HRMS)) revealed a shift of homologue response patterns even in-between LC/ESI-based set-ups, which was more pronounced for CPs of low chlorination degree. This finding emphasizes the need for a comprehensive description of instrument parameters when publishing occurrence data. Second, the quantification of a data set of samples with four quantification methods showed that quantification at the sum SCCP and MCCP levels presented good comparability, while quantification at the homologue level remained unsatisfactory. In light of those results, we suggest that (i) response pattern comparison should only be performed between similar instrumental set-ups, (ii) experimental chlorination degrees should be used when quantifying according to the %Cl (instead of those provided by the suppliers), and (iii) concentration results should be expressed as the sum of SCCPs and MCCPs primarily, with an indication on the match between samples and quantification standards (for example their chlorine content).

Chlorines Are Not Evenly Substituted in Chlorinated Paraffins: A Predicted NMR Pattern Matching Framework for Isomeric Discrimination in Complex Contaminant Mixtures

Chlorinated paraffins (CPs) can be mixtures of nearly a half-million possible isomers. Despite the extensive use of CPs, their isomer composition and effects on the environment remain poorly understood. Here, we reveal the isomeric distributions of nine CP mixtures with single-chain lengths (C14/15) and varying degrees of chlorination. The molar distribution of C n H2n+2-m Cl m in each mixture was determined using high-resolution mass spectrometry (MS). Next, the mixtures were analyzed by applying both one-dimensional 1H, 13C and two-dimensional nuclear magnetic resonance (NMR) spectroscopy. Due to substantially overlapping signals in the experimental NMR spectra, direct assignment of individual isomers was not possible. As such, a new NMR spectral matching approach that used massive NMR databases predicted by a neural network algorithm to provide the top 100 most likely structural matches was developed. The top 100 isomers appear to be an adequate representation of the overall mixture. Their modeled physicochemical and toxicity parameters agree with previous experimental results. Chlorines are not evenly distributed in any of the CP mixtures and show a general preference at the third carbon. The approach described here can play a key role in understanding of complex isomeric mixtures such as CPs that cannot be resolved by MS alone.