Temporal Archive of Atmospheric Microplastic Deposition Presented in Ombrotrophic Peat

Polystyrene nanoplastics reshape the peatland plants (Sphagnum) bacteriome under simulated wet-deposition pathway: Insights into unequal impact of ecological niches

Nanoplastics (NPs) enter peatlands through atmospheric deposition, yet their effects on Sphagnum bacterial communities (SBCs) and plant-self remain unknown. We hypothesize that NPs alter the composition, structure, and co-occurrence pattern of epiphytes (Epi) and endophytes (En), thereby differentially affecting the growth and physiological performance of Sphagnum. The 30-day simulated wet deposition experiment was conducted to test this. Here, polystyrene NPs reduced the α-diversity of SBCs, unevenly reshaped the structure of Epi and En. Mfuzz clustering was used to reveal the co-abundance behavior of SBCs, and the null model found SBCs relied on stochastic assembly, formed stable Epi molecular ecological network (MEN) and connected En MEN. NPs disrupted symbiosis of SBCs, with high-abundance phyla reductions impacting MENs and low-abundance phyla affecting the inter-domain ecological network (IDEN) between Epi and En. Increasingly positive NPs (from carboxyl-modified to unmodified, and then to amino-modified NPs) further decreased SBCs abundance. Key clusters of Proteobacteria (Pro.), with α-Pro. and γ-Pro. as module hubs of MENs, and β-Pro. as a network hub in the IDEN, could reflect these changes. Additionally, NPs lowered plant spread area (P < 0.05) and chlorophyll content (P < 0.01), but the reduction in biomass was not significant. Structural equation modeling showed reduced SBCs α-diversity alleviated the NPs phytotoxicity (up to 33.31 % offset), as genetic analysis revealed that methane oxidation, carbon fixation, and trace element metabolism may upregulate plant nutrient supply. Our findings offer critical insights into NPs deposition risks in remote areas and highlight the responses of plant-bacteriome symbiosis.

Atmospheric microplastics deposition in a central Indian city: Distribution, characteristics and seasonal variations

Atmospheric microplastics (AMPs) transport and deposition in urban areas contribute to microplastics pollution. The present study investigates AMPs deposition, characteristics, potential sources, and the influence of meteorological factors in a central Indian city. AMPs were collected over three land-use types, viz. institutional, commercial, and industrial areas, during four seasons: summer, monsoon, autumn, and winter. The deposition flux of microplastics ranged from 212.53 ± 52.32 to 543.25 ± 71.23 particles/m2/day. The AMPs were predominantly fibres (87.84 %), followed by films (5.43 %), with particle size <1000 μm contributed 43.67 %. The predominant polymer types identified were polyethylene terephthalate (PET, 37.39 %), nylon (20.49 %), and polypropylene (PP, 10.27 %). Higher deposition fluxes were recorded in summer, with 491.06 ± 73.37 particles/m2/day. Correlation analysis revealed a negative correlation between rainfall and AMPs deposition, suggesting a potential cleaning role of rainfall. The estimated annual deposition flux of AMPs in Nagpur city was 3.22 × 1013 particles. Higher AMPs deposition was attributed to plastic waste littering, industrial emissions, and textiles. The estimated mean annual inhalation exposures of AMPs of size 50-250 μm for children and adults were 7375.84 ± 1312.89 and 3738.17 ± 665.39 MPs/kg-bw/year, respectively. The findings of this study contribute to understanding the fate of AMPs and its implications for human exposure. The findings underscore the importance of reducing and managing plastic waste.

Comparison of Microplastics between Lung Tissues and Intestinal Contents in Finless Porpoises (Neophocaena asiaeorientalis)

Microplastics are ubiquitous environmental pollutants in terrestrial, marine, and atmospheric ecosystems. Plastic inputs into the atmosphere occur through weathering or abrasion, dispersing microplastics globally, which can enter the animals' respiratory systems through inhalation. We analyzed the lung tissues for the first time and the intestinal contents of 11 dead finless porpoises (Neophocaena asiaeorientalis) to assess the intake of microplastics from prey and atmospheric sources. The lung tissues and intestinal contents contained average concentrations of 0.14 ± 0.11 MPs/g and 0.35 ± 0.36 MPs/g, respectively. Microplastics found in the lung tissues and intestinal contents were similar in physical characteristics (e.g., fragment shape, transparent to white color, and size <100 μm). On the other hand, they differed in the polymer types, with a higher proportion of epoxy-type microplastics in the lungs. Epoxy is a highly hazardous polymer according to the polymer hazard index, and in the present study, the lung tissues had a higher plastic hazard index than the intestinal contents. Hence, the respiratory system is more vulnerable to microplastic pollution from atmospheric sources than the digestive system is from water and food intake. These findings underscore the growing threat of airborne microplastics to lung-breathing animals including marine mammals.

Microplastic proliferation in Malaysia's waterways: bridging knowledge gaps for environmental health

Microplastic (MP) pollution is an imperative environmental concern in Malaysia, distinguished by its insidious nature and enduring detrimental impacts. The nation grapples with challenges such as intensified industrial activities, inadequate plastic waste management, and insufficient law enforcement. There is an urgent need to address Malaysian waterways to mitigate this "Silent Killer" that compromises the food chain, with approximately 50% of MP ingestion attributed to fish, averaging 502.3 mg per individual daily. This review critically evaluates both primary and secondary sources of MP pollution within Malaysia's aquatic ecosystems, categorizing them into three distinct groups: (1) terrestrial sources, (2) aquatic sources, and (3) atmospheric sources. The regulatory frameworks and socioeconomic determinants, including the escalation of vehicle usage and industrial operations, inform these classifications. The research compilation utilized scientific databases, academic conferences, and sector-specific reports. The study underscores the paucity of information regarding MP pollution. It highlights the necessity for comprehensive investigations employing standardized methodologies and primary data collection, encompassing seafood samples, small streams, drainage systems, and sludge analysis. Additionally, secondary data sources, such as air samples from industrial precincts and aquatic environments, are essential for assessing MP. Raising public awareness about post-consumer plastic waste management and oil disposal in restaurants and workshops is crucial. Robust legal frameworks must be enacted and enforced across the nation, extending beyond urban locales, with stringent enforcement and standardized data gathering being vital for formulating effective strategies to reduce plastic waste and foster a safer ecological environment.

Atmospheric microplastic input into wetlands: Spatiotemporal patterns, drivers, and unique ecological impacts

Wetlands are major microplastic sinks with a large atmospheric input. However, many details of such deposited atmospheric microplastics entering into wetlands remain unclear, including temporal patterns of input and ecological effects. We monitored the aerial microplastics during four seasons in eleven economically developed cities along the lower reaches of the Yangtze River Basin, China. The average microplastic deposition rate was 512.31 items m-2 d-1, equivalent to an annual contribution of 17.46 metric tons of plastic to the surveyed wetlands with a total area of 1652 km2. These microplastics were predominantly composed of polyamide and polyethylene terephthalate with 61.85 ± 92.29 µm sized pellets, and we obtained similar results for microplastics intercepted on moss in wetlands. Microplastic input varied between wet and dry periods, primarily influenced by wind, rainfall and ozone concentration. Civilian vehicle density and textile industry were the primary socioeconomic factors driving microplastic deposition. Further indoor microcosm experiments revealed that moss phyllosphere bacterial community structure and function were influenced by microplastic abundance and size, exemplifying the unique ecological risks of aerially deposited microplastics to wetlands. These results indicate that mosses and their phyllosphere microbiota could serve as bio-indicators of aerial microplastic characteristics and impacts.

Spatial and seasonal variations of atmospheric microplastics in high and low population density areas at the intersection of tropical and subtropical regions

There is limited information regarding spatial and seasonal variations of atmospheric microplastics (MPs) and factors influencing MPs at the intersection of tropical and subtropical regions. A one-year study was conducted at sites in a high-population-density village (HPDV) and a low-population-density village (LPDV) in Taiwan to investigate the characteristics and influencing factors of airborne MPs. The predominant shapes, sizes, and polymer compositions of MPs were fragments, 3 to 25 and 26-50 μm, and polyamide at both sites. Seasonal variation in MP morphologies was not significant. Average MP concentrations were 2.20 ± 2.97 particles/m3 and 1.92 ± 2.35 particles/m3 at the HPDV and LPDV sites, respectively, and did not differ significantly. Higher concentrations and smaller sizes of MPs were found during the summer at both sites, while the predominant wind direction was southerly or southwesterly. In samples with temperatures exceeding 25 °C, the temperature was positively associated with MP concentrations at both the HPDV and LPDV sites. These results reflect that temperature influences the variations in the concentrations and sizes of MPs at our study site. Future research should consider the adverse risks of MP inhalation during the hot season. Moreover, when sites with different population densities and levels of human activity are closed, MP concentrations will not differ significantly between these areas since airflow can transport these particles from high-population-density areas into low-population-density areas in a short time.

Microplastics in glaciers of Tibetan Plateau: Characteristics and potential sources

Microplastics (MPs) in glaciers of remote areas are a hot topic linking the global transport of atmospheric MPs. The Tibetan Plateau (TP) holds large volume of glaciers, providing an effective way to trace MPs transport. Moreover, MPs in glaciers may have adverse effects on the local ecosystem and human health. In this study, we investigate MPs in snowpits collected from six glaciers across the different domain of the TP. The average abundance of MPs in six snowpits is 339.22 ± 51.85 items L-1 (with size ≥10 μm) measured by Agilent 8700 Laser Direct Infrared Chemical Imaging System (LDIR), represented by relatively high MPs abundance in the southern TP and low in the northern TP. The polymers with lower density, namely polyethylene (PE), polyamide (PA), and rubber, are the main MPs types, which are predominated by fragments with sizes smaller than 100 μm in each snowpit. Sources of MPs on glaciers include local tourism and vehicle traffic emissions of MPs. Meanwhile, long-range atmospheric transport of MPs from surrounded regions cannot be ignored. Backward trajectory analysis indicates cross-boundary transport of atmospheric MPs from South Asia play an important role on MPs deposited onto TP glaciers. Analysis further reveals that MPs in glaciers are associated with atmospheric mineral dust deposition. This study provides new data for the investigation of MPs in glaciers of remote areas, and a reference for studying MPs in the ice cores of TP glaciers.

Optimization and application of pretreatment method of microplastics detection in municipal solid waste landfills

The landfill is one of the most important sources of microplastics (MPs). The pretreatment method is a precondition of microplastics study for the presence of complex substances in landfills. Therefore, it is essential to examine the impact of different pretreatment methods on the microplastics detection. A literature review and a comparison experiment on digestion solutions were performed to establish a comprehensive identification method for MPs in landfills. When exposed to of 30 % H2O2, minimal mass reduction of PE, PP and PET were 4.00 %, 3.00 % and 3.00 % respectively, and the least surface damage was observed in MPs, while exhibiting the most optimal peak value for infrared spectral characteristics. It is demonstrated that the effect of 30 % H2O2 dissolution was superior compared to 10 % KOH and 65 % HNO3. The method was subsequently utilized to investigate the distribution of MPs in a landfill. The dominant MPs were polyethylene (PE, 18.56-23.91 %), polyethylene terephthalate (PET, 8.80-18.66 %), polystyrene (PS, 10.31-18.09 %), and polypropylene (PP, 11.60-14.91 %). The comprehensive identification method of "NaCl density separation + 30 % H2O2 digestion + NaI density separation + sampling microscope + Mirco-FTIR" is suitable for the detection of MPs in landfills.

The potential of micro- and nanoplastics to exacerbate the health impacts and global burden of non-communicable diseases

Non-communicable diseases (NCD) constitute one of the highest burdens of disease globally and are associated with inflammatory responses in target organs. There is increasing evidence of significant human exposure to micro- and nanoplastics (MnPs). This review of environmental MnP exposure and health impacts indicates that MnP particles, directly and indirectly through their leachates, may exacerbate inflammation. Meanwhile, persistent inflammation associated with NCDs in gastrointestinal and respiratory systems potentially increases MnP uptake, thus influencing MnP access to distal organs. Consequently, a future increase in MnP exposure potentially augments the risk and severity of NCDs. There is a critical need for an integrated one-health approach to human health and environmental research for assessing the drivers of human MnP exposure and their bidirectional links with NCDs. Assessing these risks requires interdisciplinary efforts to identify and link drivers of environmental MnP exposure and organismal uptake to studies of impacted disease mechanisms and health outcomes.

Toward Nano- and Microplastic Sensors: Identification of Nano- and Microplastic Particles via Artificial Intelligence Combined with a Plasmonic Probe Functionalized with an Estrogen Receptor

Nano- and microplastic particles are a global and emerging environmental issue that might pose potential threats to human health. The present work exploits artificial intelligence (AI) to identify nano- and microplastics in water by monitoring the interaction of the sample with a sensitive surface. An estrogen receptor (ER) grafted onto a gold surface, realized on a nonexpensive and easy-to-produce plastic optical fiber (POF) platform in order to excite a surface plasmon resonance (SPR) phenomenon, has been developed in order to carry out a "smart" sensitive interface (ER-SPR-POF interface). The ER-SPR-POF interface offers output data useful for exploiting a machine learning-based approach to achieve nano- and microplastic particle sensors. This work developed a proof-of-concept sensor through a training phase carried out by different particles, in terms of materials and size. The experimental results have demonstrated that the proposed "smart" ER-SPR-POF interface combined with AI can be used to identify the kind of particles in terms of the materials (polystyrene; poly(methyl methacrylate)) and size (20 μm; 100 nm) with an accuracy of 90.3%.

Time-varying microplastic contributions of a large urban and industrial area to river sediments

The quantification of microplastic (MP) pollution in rivers is often constrained by a lack of historical data on a multi-decadal scale, which hinders the evaluation of public policies. In this study, MP contents and trends were analyzed in dated sediment cores sampled upstream and downstream of a large metropolis, in environmental deposits that exhibited consistent sedimentation patterns from the 1980s to 2021. After a thorough sedimentological analysis, MPs were quantified in samples by micro Fourier Transform InfraRed spectroscopy (μFTIR imaging) and a density separation and organic matter digestion procedure. Microplastics recorded in the upstream core are relatively ubiquitous all along the dated sequence. The results also confirmed a sever increase of microplastics levels in the downstream core, by one order of magnitude, and an increase of polymer types. Polypropylene, polyethylene, and polystyrene represent ubiquitous contamination and were predominant at the two stations, whereas polyvinyl chloride and polytetrafluoroethylene were suspected to be abundant at the downstream station, but were not detected at the upstream station. Their presence could be linked to local contamination from specific industrial sources that manufactured and utilized these polymers. Surprisingly, in the downstream station sediment has recorded a relative improvement in polymers associated with industrial sources since the 2000s and, to a lesser extent, for ubiquitous ones since the 2010s. This trend of mitigation diverges from that of global assessments, that assume uncontrolled MP pollution, and suggest that European Union wastewater policy and regulation on industrial discharges have positively influenced water quality, and certainly also on MPs. However, the accumulation of microplastics remains high in recent deposits and raises the emerging concern of the long-term management of these reservoirs.

A Multicompartment Assessment of Microplastic Contamination in Semi-remote Boreal Lakes

Microplastic contamination is ubiquitous across the globe, even in remote locations. Still, the sources and pathways of microplastics to such locations are largely unknown. To investigate microplastic contamination in a semi-remote location, we measured microplastic concentrations in nine oligotrophic lakes within and around the International Institute for Sustainable Development-Experimental Lakes Area in northwestern Ontario, Canada. Our first objective was to establish ambient concentrations of microplastics in bottom sediments, surface water, and atmospheric deposition in semi-remote boreal lakes. Across all lakes, mean shallow and deep sediment microplastic concentrations, near-surface water microplastic concentrations from in situ filtering, and dry atmospheric microplastic deposition rates were 551 ± 354 particles kg-1 , 177 ± 103 particles kg-1 , 0.2 ± 0.3 particles L-1 , and 0.4 ± 0.2 particles m-2  day-1 , respectively. Our second objective was to investigate whether microplastic contamination of these lakes is driven by point sources including local runoff and direct anthropogenic inputs or nonpoint sources such as atmospheric deposition. Lakes were selected based on three levels of anthropogenic activity-low, medium, and high-though activity levels were minimal across all study lakes compared with highly populated areas. Whereas a positive correlation would indicate that point sources were a likely pathway, we observed no relationship between the level of anthropogenic activity and microplastic contamination of surface water. Moreover, the composition of microplastics in surface water and atmospheric deposition were similar, comprising mostly polyester and acrylic fibers. Together, these results suggest that atmospheric deposition may be the main pathway of microplastics to these remote boreal lakes. Environ Toxicol Chem 2024;00:1-13. © 2024 The Authors. Environmental Toxicology and Chemistry published by Wiley Periodicals LLC on behalf of SETAC.

Human Exposure to Ambient Atmospheric Microplastics in a Megacity: Spatiotemporal Variation and Associated Microorganism-Related Health Risk

Microplastics are found in various human tissues and are considered harmful, raising concerns about human exposure to microplastics in the environment. Existing research has analyzed indoor and occupational scenarios, but long-term monitoring of ambient atmospheric microplastics (AMPs), especially in highly polluted urban regions, needs to be further investigated. This study estimated human environmental exposure to AMPs by considering inhalation, dust ingestion, and dermal exposure in three urban functional zones within a megacity. The annual exposure quantity was 7.37 × 104 items for children and 1.06 × 105 items for adults, comparable with the human microplastic consumption from food and water. Significant spatiotemporal differences were observed in the characteristics of AMPs that humans were exposed to, with wind speed and rainfall frequency mainly driving these changes. The annual human AMP exposure quantity in urban green land spaces, which were recognized as relatively low polluted zones, was comparable with that in public service zones and residential zones. Notably, significant positive correlations between the AMP characteristics and the pathogenicity of the airborne bacterial community were discovered. AMP size and immune-mediated disease risks brought by atmospheric microbes showed the most significant relationship, where Sphingomonas might act as the potential key mediator.

Distinct dynamics in mountain watersheds: Exploring mercury and microplastic pollution-Unraveling the influence of atmospheric deposition, human activities, and hydrology

The intensification of human activities all around the globe has led to the spread of micropollutants in high-mountain freshwater environments. We therefore aimed to assess the geospatial distribution and determine the potential sources of (total-) mercury (THg) and microplastics (MPs) in mountain freshwater ecosystems. To do so, we analyzed THg and MP concentrations in brown trout, biofilm, and sediments from lotic and lentic ecosystems in the Pyrenees - all subjected to different types of human pressure. Additionally, we assessed the potential impacts of these pollutants on fish, and explored the bioindication capacity of brown trout (Salmo trutta fario) and biofilm regarding THg and MP pollution. For the first time, we measured concentrations of MPs trapped in the matrix of freshwater biofilm. Our results suggest that THg in the Pyrenees might be explained by both legacy (regional) and distant sources, in combination with environmental characteristics such as the presence of peatlands or streamwater physicochemistry, while MPs in fish are linked to recent local pollution sources such as single-use plastics. In contrast, MPs in biofilm matrix and sediments indicate a combination of distant (i.e., atmospheric deposition) and recent local pollution sources. Moreover, hydrodynamics and plastic density likely control MP distribution in rivers. Based on Fulton's condition factor, we also found that higher THg concentrations caused a negative impact on fish health (K < 1), while no impact of MPs could be seen. Therefore, we suggest that brown trout and biofilm can serve as bioindicators of atmospheric deposition of THg in high-altitude lakes and that biofilm is a reliable bioindicator to assess MP pollution in remote environments. Brown trout may also act as a bioindicator of MP pollution, but only efficiently in more polluted areas.

A plasmonic gold nano-surface functionalized with the estrogen receptor for fast and highly sensitive detection of nanoplastics

Nanoplastics are a global emerging environmental problem whose effects might pose potential threats to the human's health. Despite the relevance of the issue, fast, reliable and quantitative in situ analytical approaches to determine nanoplastics are not yet available. The aim of this work was to devise an optical sensor with the goal of direct detecting and quantifying nanoplastics in seawater without sample pre-treatments. To this purpose, a nano-plasmonic biosensor was developed by exploiting an Estrogen Receptor (ER) recognition element grafted onto a polymer-based gold nanograting (GNG) plasmonic platform. The ER-GNG biosensor required just minute sample volumes (2 μL), allowed rapid detection (3 min) and enabled to determine nanoplastics in simulated seawater with a linear dynamic concentrations range of 1-100 ng/mL, thus encompassing the expected environmental loads. The nanostructured grating (GNG) provided remarkable performance enhancements, extending the measurement range across five orders of magnitude, thanks to the both the SPR and the localized SPR phenomena occurring at the GNG chip. At last, the ER-GNG biosensor was tested on real seawater samples collected in the Naples area and the results (∼30 ng/mL) were verified by a conventional approach (filtration and evaporation), confirming the ER-GNG sensor offers a straightforward and highly sensitive method for the direct in-field nanoplastics monitoring.

Spatial distribution of atmospheric microplastics in bulk-deposition of urban and rural environments - A one-year follow-up study in northern Germany

Atmospheric microplastic deposition rates play a crucial role for calculating the input of microplastics in the environment and to further understand pollution patterns. In this study, the spatial and temporal distribution of atmospheric microplastic particles in urban and rural areas of Northern Germany was investigated. Therefore, eleven structurally diverse locations in Hamburg and Mecklenburg-Western Pomerania were equipped with bulk-deposition samplers in triplicates and sampled monthly between August 2019 and July 2020. The resulting 306 samples were treated with hydrogen peroxide (30 %) and sodium hypochlorite (6-14 %) to digest biological organic matter. The filters were subsequently stained with the lipophilic dye Nile Red and underwent visual microplastic identification via fluorescence microscopy. Fragments and fibers were quantified down to a cut-off size of 10 μm. The polymer composition of microplastic particles was investigated along a subset of particles via μ-Raman spectroscopy. The microplastic deposition rate for Northern Germany (89 ± 61 MP/m2/day) is in the same order of magnitude as those reported by previous studies. Significant differences in microplastic deposition rates were found between urban and rural sampling sites. Population density was identified as an important factor for greater amounts of microplastics and higher shares of fibers in urban samples. Special attention was given to the canopy cover at two forested sampling sites and an influence of the comb-out effect on atmospheric microplastic deposition was detected.

The recovery of aerosol-sized microplastics in highly refractory vegetal matrices for identification by automated Raman microspectroscopy

Ombrotrophic peatlands are fed uniquely by atmospheric inputs and therefore have much potential as temporal archives of atmospheric microplastic (MP) deposition, yet the recovery and detection of MP within an almost purely organic matrix is challenging. This study presents a novel peat digestion protocol using sodium hypochlorite (NaClO) as a reagent for biogenic matrix removal. NaClO is more efficient than hydrogen peroxide (H₂O₂). By using purged air-assisted digestion, NaClO (50 vol%) reached 99% matrix digestion compared with 28% and 75% by H₂O₂ (30 vol%) and Fenton's reagent, respectively. At a concentration of 50 vol% NaClO did however chemically disintegrate small amounts (<10 mass %) of polyethylene terephthalate (PET) and polyamide (PA) fragments in the millimeter size range. Observation of PA6 in natural peat samples, while not found in the procedural blanks, questions whether PA is fully disintegrated by NaClO. The protocol was applied to three commercial sphagnum moss test samples, in which MP particles in the range of 0.8-65.4 μm were detected by Raman microspectroscopy. The MP mass% was determined at 0.012% corresponding to 129 thousand MP particles/g, of which 62% were smaller than 5 μm and 80% were smaller than 10 μm, yet were accountable for only 0.4% (500 ng) and 3.2% (4 μg) of the total mass of MP, respectively. These findings underline the importance of the identification of particles Ø < 5 μm when investigating atmospheric MP deposition. The MP counts were corrected for MP recovery loss and procedural blank contamination. MP spike recovery following the full protocol was estimated at 60%. The protocol offers an efficient way of isolating and pre-concentrating most aerosol sized MPs in large quantities of refractory vegetal matrices and enables the automated μRaman scanning of thousands of particles at a spatial resolution on the order of 1 μm.

There's something in the air: A review of sources, prevalence and behaviour of microplastics in the atmosphere

Literature regarding microplastics in the atmosphere has advanced in recent years. However, studies have been undertaken in isolation with minimal collaboration and exploration of the relationships between air, deposition and dust. This review collates concentrations (particle count and mass-based), shape, size and polymetric characteristics for microplastics in ambient air (m3), deposition (m2/day), dust (microplastics/g) and snow (microplastics/L) from 124 peer-reviewed articles to provide a holistic overview and analysis of our current knowledge. In summary, ambient air featured concentrations between <1 to >1000 microplastics/m³ (outdoor) and <1 microplastic/m³ to 1583 ± 1181 (mean) microplastics/m³ (indoor), consisting of polyethylene terephthalate, polyethylene, polypropylene. No difference (p > 0.05) was observed between indoor and outdoor concentrations or the minimum size of microplastics (p > 0.5). Maximum microplastic sizes were larger indoors (p < 0.05). Deposition concentrations ranged between 0.5 and 1357 microplastics/m²/day (outdoor) and 475 to 19,600 microplastics/m²/day (indoor), including polyethylene, polystyrene, polypropylene, polyethylene terephthalate. Concentrations varied between indoor and outdoor deposition (p < 0.05), being more abundant indoors, potentially closer to sources/sinks. No difference was observed between the minimum or maximum reported microplastic sizes within indoor and outdoor deposition (p > 0.05). Road dust concentrations varied between 2 ± 2 and 477 microplastics/g (mean), consisting of polyvinyl chloride, polyethylene, polypropylene. Mean outdoor dust concentrations ranged from <1 microplastic/g (remote desert) to between 18 and 225 microplastics/g, comprised of polyethylene terephthalate, polyamide, polypropylene. Snow concentrations varied between 0.1 and 30,000 microplastics/L, containing polyethylene, polyamide, polypropylene. Concentrations within indoor dust varied between 10 and 67,000 microplastics/g, including polyethylene terephthalate, polyethylene, polypropylene. No difference was observed between indoor and outdoor concentrations (microplastics/g) or maximum size (p > 0.05). The minimum size of microplastics were smaller within outdoor dust (p > 0.05). Although comparability is hindered by differing sampling methods, analytical techniques, polymers investigated, spectral libraries and inconsistent terminology, this review provides a synopsis of knowledge to date regarding atmospheric microplastics.

Children's playgrounds contain more microplastics than other areas in urban parks

Children spend many hours in urban parks and playgrounds, where the tree canopy could filter microplastics released from the surrounding urban hotspots. However, the majority of children's playgrounds also contain plastic structures that could potentially release microplastics. To assess if the children's playgrounds pose a higher exposure risk than other places inside the park, we evaluate the extent of microplastic contamination in the sand, soil, and leaf samples from 19 playgrounds inside urban parks in Los Angeles, CA, USA. The average microplastic concentration in sand samples collected inside the playground was 72 p g-1, and >50 % of identified plastics were either polyethylene or polypropylene. Microplastic concentrations inside the playgrounds were on average >5 times greater than concentrations outside the playgrounds in the park, indicating that children playing within the playground may be exposed to more microplastics than children playing outside the playground in the same park. By comparing the microplastic composition found inside and outside the playgrounds with the plastic composition of the plastic structures in the playground, we show that plastic structures and other products used inside the playgrounds could contribute to elevated microplastic concentration. The population density was slightly correlated with a microplastic concentration in the park soil but did not correlate with microplastic concentration inside the playgrounds. Therefore, playgrounds in urban parks may have microplastic exposure risks via inhalation or ingestion via hand-to-mouth transfer.

Submicron Plastic Adsorption by Peat, Accumulation in Sphagnum Mosses and Influence on Bacterial Communities in Peatland Ecosystems

The smallest fraction of plastic pollution, submicron plastics (SMPs <1 μm) are expected to be ubiquitous in the environment. No information is available about SMPs in peatlands, which have a key role in sequestering carbon in terrestrial ecosystems. It is unknown how these plastic particles might behave and interact with (micro)organisms in these ecosystems. Here, we show that the chemical composition of polystyrene (PS) and poly(vinyl chloride) (PVC)-SMPs influenced their adsorption to peat. Consequently, this influenced the accumualtion of SMPs by Sphagnum moss and the composition and diversity of the microbial communities in peatland. Natural organic matter (NOM), which adsorbs from the surrounding water to the surface of SMPs, decreased the adsorption of the particles to peat and their accumulation by Sphagnum moss. However, the presence of NOM on SMPs significantly altered the bacterial community structure compared to SMPs without NOM. Our findings show that peatland ecosystems can potentially adsorb plastic particles. This can not only impact mosses themselves but also change the local microbial communities.

Microplastics in urban runoff: Global occurrence and fate

Public concerns on microplastic (MP) pollution and its prevalence in urban runoff have grown exponentially. Huge amounts of MPs are transported from urban environments via surface runoff to different environment compartments, including rivers, lakes, reservoirs, estuaries, and oceans. The global concentrations of MPs in urban runoff range from 0 to 8580 particles/L. Understanding the sources, abundance, composition and characteristics of MPs in urban runoff on a global scale is a critical challenge because of the existence of multiple sources and spatiotemporal heterogeneity. Additionally, dynamic processes in the mobilization, aging, fragmentation, transport, and retention of MPs in urban runoff have been largely overlooked. Furthermore, the MP flux through urban runoff into rivers, lakes and even oceans is largely unknown, which is very important for better understanding the fate and transport of MPs in urban environments. Here, we provide a critical review of the global occurrence, transport, retention process, and sinks of MPs in urban runoff. Relevant policies, regulations and measures are put forward. Future global investigations and mitigation efforts will require us to address this issue cautiously, cooperating globally, nationally and regionally, and acting locally.

Plastic in the air?! - Spider webs as spatial and temporal mirror for microplastics including tire wear particles in urban air

Studies concerning quantities of microplastics (MP) including tire wear particles (TWP) contamination in air samples are scarce. Spider webs have been suggested as a cheap and easily accessible biomonitor particularly for inorganic contaminates. Here, we emphasize the potential of spider webs to gain insights in the spatial and temporal trends of MP in urban air. The samples, collected in a mid-sized German city, were processed with Fentons reagent and measured using pyrolysis-gas chromatography-mass spectrometry for specific, polymer related indicator compounds. All samples contained TWP and other MP. The latter are detected and quantified as pyrolysis products of a polymer backbone. The results were expressed as clusters (prefix "C"). Determined polymer contaminations ranged from 11.4 μg/mg to 108 μg/mg spider web sample. The dominant polymer was C-PET (Ø 36.0% of total MP) derived most likely from textile fibers. Additionally, there was evidence for traffic-related contaminations. In particular car tire tread (Ø 40.8% of total MP) and ^⁎C-PVC (Ø 12.0% of total MP) were found, with the latter presumably originating from paint used for road markings. Truck tire tread, C-PE, C-PP, C-PS, C-PMMA, and C-PC were also frequently found, but in much lower abundance (Ø <6.4% of total MP). Differences in contamination levels could be plausibly related to the sampling locations.