How Pseudo-lignin Is Generated during Dilute Sulfuric Acid Pretreatment

Chemical Resistance of Modified Wood Veneers in Sustainable Load Bearing Elements

In the pursuit of sustainable engineering solutions, material selection is increasingly directed toward resources that offer functional efficacy, economic feasibility, and minimal environmental impact. To replace environmentally damaging materials like aluminum with more sustainable alternatives like wood-based materials, it is essential to improve the durability and longevity of wood. This study explores the potential suitability of modified veneers as an outer protective layer for unmodified wooden load-bearing elements, providing a cost-effective and resource-efficient alternative to bulk modification. Unmodified, acetylated, furfurylated, and physically densified birch rotary-cut wood veneers were exposed to liquid chemical reagents (acids, base, solvents, and water) and characterized thereafter in tensile tests. The chemical resistance was evaluated based on the deterioration of tensile strength. Additionally, infinite focus microscopy, infrared spectroscopy, and contact angle measurements were performed to track morphological and chemical changes in the veneers. The results demonstrated that acetylation and furfurylation significantly enhanced chemical resistance against the tested reagents.

Insights into the Chemical Structure and Antioxidant Activity of Lignin Extracted from Bamboo by Acidic Deep Eutectic Solvents

Deep eutectic solvents (DESs) composed of choline chloride as hydrogen bond acceptors (HBAs) and six organic acids as hydrogen bond donors (HBDs) were used to extract lignin from bamboo (Phyllostachys edulis (Carrière) J. Houz.). The structures of the DES-extracted lignin samples were analyzed by Fourier-transform infrared spectroscopy (FT-IR), UV-visible spectroscopy (UV-vis), thermogravimetric analysis (TG), and gel permeation chromatography (GPC) to investigate the relationship between the chemical structure of lignin and its antioxidant activity. The results showed that DES treatment removed a large portion of the lignin (73.37-86.38%) from bamboo, and the chemical structure of lignin was changed due to the use of different types of HBDs. The extracted lignin exhibited good UV-vis light shielding properties, thermal stability, and antioxidant activity. Moreover, the total phenolic hydroxyl content of lignins was positively correlated with their antioxidant activity, while the molecular weight of lignins was negatively correlated with their antioxidant activity. Notably, lignin extracted with choline chloride-p-toluenesulfonic acid had the highest phenolic hydroxyl content and lower molecular weight, showing the strongest antioxidant activity (IC50 DPPH = 417.69 μg/mL, IC50 ABTS = 58.62 μg/mL). This study confirms the high thermal stability, excellent antioxidant activity, and UV shielding properties of lignin extracted with choline chloride-organic acid DESs, suggesting its potential application in the fields of antioxidants and material modifiers.

Aluminum ion intercalation in mesoporous multilayer carbocatalysts promotes the conversion of glucose to 5-hydroxymethylfurfural

In this study, an efficient modification strategy was proposed by facile loading of trace aluminum ions and p-toluene sulfonic acid (p-TSA) in carbon materials to improve their catalytic activity. p-TSA is then proven to regulate the carbonization process and promote the formation of mesoporous and multilayer structures. The hexa-coordinated aluminum structure is characterized by 1H-27Al solid-state nuclear magnetic resonance (SSNMR) and X-ray photoelectron spectroscopy, which serves as the Lewis-Brønsted acid site in carbocatalysts. Accordingly, the resulting catalyst facilitates a yield of ∼70% for converting glucose to 5-hydroxymethylfurfural (HMF) with a maximum carbon balance of around 91.4% at 150 °C in 6 h. In situ NMR, electrospray ionization mass spectrometry and isotope labeling analysis reveal that the hexa-coordinated aluminum sites promote the isomerization of glucose, and the sulfonic groups facilitate the subsequent dehydration and rehydration of fructose and levoglucosan intermediates. Kinetic models further indicate the decreased energy barrier for glucose conversion over the Al3+/p-TSA intercalated carbocatalyst. This work provides a promising strategy for engineering waste-derived carbocatalysts toward effectively converting carbohydrates to precursors of biofuels and bioplastics.

Conversion of the hydrochar recovered after levulinic acid production into activated carbon adsorbents

Levulinic acid production by acid-catalyzed hydrothermal conversion of (ligno)cellulosic biomass generates significant amounts of carbonaceous hydrochar, which is currently considered a final waste. In this work, the hydrochar recovered after the levulinic acid production, was subjected to cascade pyrolysis and chemical activation treatments (by H3PO4 or KOH), to synthesize activated carbons. The pyrolysis post-treatment was already effective in improving the surface properties of the raw hydrochar (Specific Surface Area: 388 m2/g, VP: 0.22 cm3/g, VMESO: 0.07 cm3/g, VMICRO: 0.14 cm3/g), by removing volatile compounds. KOH activation resulted as the most appropriate for further improving the surface properties of the pyrolyzed hydrochar, showing the best surface properties (Specific Surface Area: 1421 m2/g, VP: 0.63 cm3/g, VMESO: 0.10 cm3/g, VMICRO: 0.52 cm3/g), which synergistically makes it a promising system towards adsorption of CO2 (∼90 mg/g) and methylene blue (∼248 mg/g). In addition, promising surface properties can be achieved after direct chemical activation of the raw hazelnut shells, preferably by H3PO4 (Specific Surface Area: 1918 m2/g, VP: 1.34 cm3/g, VMESO: 0.82 cm3/g, VMICRO: 0.50 cm3/g), but this choice is not the smartest, as it does not allow the valorization of the cellulose fraction to levulinic acid. Our approach paves the way for possible uses of these hydrochars originating from the levulinic acid chain for new environmental applications, thus smartly closing the biorefinery loop of the hazelnut shells.

Novel dual-action vanillic acid pretreatment for efficient hemicellulose separation with simultaneous inhibition of lignin condensation

Aromatic acids play a selective role in the separation of hemicellulose. Phenolic acids have demonstrated an inhibitory effect on lignin condensation. In the current study, vanillic acid (VA), which combines the characteristics of aromatic and phenolic acids, is used to separate eucalyptus. The efficient and selective separation of hemicellulose is achieved simultaneously at 170 °C, 8.0% VA concentration, and 80 min. The separation yield of xylose increased from 78.80% to 88.59% compared to acetic acid (AA) pretreatment. The separation yield of lignin decreased from 19.32% to 11.19%. In particular, the β-O-4 content of lignin increased by 5.78% after pretreatment. The results indicate that VA, as a "carbon positive ion scavenger", it preferentially reacts with the carbon-positive ion intermediate of lignin. Surprisingly, the inhibition of lignin condensation is achieved. This study provides a new starting point for the development of an efficient and sustainable commercial technology by organic acid pretreatment.

Covalently bound humin-lignin hybrids as important novel substructures in organosolv spruce lignins

Organosolv lignins (OSLs) are important byproducts of the cellulose-centred biorefinery that need to be converted in high value-added products for economic viability. Yet, OSLs occasionally display characteristics that are unexpected looking at the lignin motifs present. Applying advanced NMR, GPC, and thermal analyses, isolated spruce lignins were analysed to correlate organosolv process severity to the structural details for delineating potential valorisations. Very mild conditions were found to not fractionate the biomass, causing a mix of sugars, lignin-carbohydrate complexes (LCCs), and corresponding dehydration/degradation products and including pseudo-lignins. Employing only slightly harsher conditions promote fractionation, but also formation of sugar degradation structures that covalently incorporate into the oligomeric and polymeric lignin structures, causing the isolated organosolv lignins to contain lignin-humin hybrid (HLH) structures not yet evidenced as such in organosolv lignins. These structures effortlessly explain observed unexpected solubility issues and unusual thermal responses, and their presence might have to be acknowledged in downstream lignin valorisation.

A pilot-scale sustainable biorefinery, integrating mushroom cultivation and in-situ pretreatment-cum-saccharification for ethanol production

Biomass pretreatment incurs 40% of the overall cost of biorefinery operations. The usage of mushroom cultivation as a pretreatment/delignification technique, and bio-ethanol production from spent mushroom substrates, after subsequent pretreatment, saccharification and fermentation processes, have been reported earlier. However, the present pilot-scale, entirely-organic demonstration is one of the very first biorefinery models, which efficiently consolidates: biomass pretreatment; in-situ cellulase production and saccharification; mushroom cultivation, thereby improving the overall operational economy. During pretreatment, the oyster mushroom, Pluerotus florida VS-6, matures into distinct substrate mycelia and fruiting bodies. Consequential variations in the kinetics of growth, biomass degradation/substrate utilization, oxygen uptake and transfer rates, and enzyme production, have been analyzed. Signifying the first-time usage of a biomass mixture, comprising vegetative waste and e-commerce packaging waste, the 30 day-long, bio-economical, non-inhibitor-generating, catabolite repression-limited, solid-state in-situ pretreatment-cum-saccharification, resulted in: 78% lignin degradation; 13.25% soluble-sugar release; 18.25% mushroom yield; 0.88 FPU/g.ds cellulase secretion. The in-situ saccharified biomass, when sequentially subjected to ex-situ enzymatic hydrolysis and fermentation, showed 37.35% saccharification, and a bio-ethanol yield of 0.425 g per g of glucose, respectively. Apart from yielding engine-ready bio-ethanol, the model doubles as an agripreneurial proposition, and encourages mushroom cultivation and consumption.

A Chemical-Free Pretreatment for Biosynthesis of Bioethanol and Lipids from Lignocellulosic Biomass: An Industrially Relevant 2G Biorefinery Approach

A wide range of inorganic and organic chemicals are used during the pretreatment and enzymatic hydrolysis of lignocellulosic biomass to produce biofuels. Developing an industrially relevant 2G biorefinery process using such chemicals is challenging and requires more unit operations for downstream processing. A sustainable process has been developed to achieve industrially relevant titers of bioethanol with significant ethanol yield. The pretreatment of sorghum biomass was performed by a continuous pilot-scale hydrothermal reactor followed by disk milling. Enzymatic hydrolysis was performed without washing the pretreated biomass. Moreover, citrate buffer strength was reduced to 100-fold (50 mM to 0.5 mM) during the enzymatic hydrolysis. Enzymatic hydrolysis at 0.5 mM citrate buffer strength showed that significant sugar concentrations of 222 ± 2.3 to 241 ± 2.3 g/L (glucose + xylose) were attained at higher solids loadings of 50 to 60% (w/v). Furthermore, hydrolysates were fermented to produce bioethanol using two different xylose-fermenting Saccharomyces cerevisiae strains and a co-culture of xylose-fermenting and non-GMO yeast cultures. Bioethanol titer of 81.7 g/L was achieved with an ethanol yield of 0.48 gp/gs. Additionally, lipids were produced using the oleaginous yeast Rhodosporidium toruloides, yielding 13.2 g/L lipids with cellular lipid accumulation of 38.5% w/w from 100 g/L of sugar concentration. In summary, reducing the strength of the citrate buffer during enzymatic hydrolysis and omitting inorganic chemicals from the pretreatment process enhances the fermentability of hydrolysates and can also reduce operating costs.

The correlation between the physicochemical properties and enzymatic hydrolyzability of hydrothermal pretreated wheat straw: A quantitative analysis

Hydrothermal pretreatment with diluted acid or alkali can disrupt the compact structure of wheat straw at a moderate temperature for efficient enzymatic saccharification. However, the quantitative analysis between the physicochemical properties and enzymatic hydrolyzability of hydrothermal pretreated lignocellulose was rarely investigated, which hindered the development of model-based applications for process design and control. Herein, correlation analysis (CA) and principal component analysis (PCA) were conducted to elucidate the dominant factors affecting the enzymatic hydrolyzability and quantitative relationship between them. CA results suggested the major positive factor affecting carbohydrate conversion was cellulose content (r = 0.86). Through logarithmic processing and linear combination, these intercorrelated factors were successfully converted into two newly uncorrelated variables named the first principal component (PC1) and the second principal component (PC2). The initial hydrolysis rate and carbohydrate conversion can be well predicted by PC1 and PC2 scores through multiple linear regression with a high R-squared (0.91 and 0.80).

Efficient separation of bagasse lignin by freeze-thaw-assisted p-toluenesulfonic acid pretreatment

Lignin separation is an important procedure that benefits multiple industries and in particular biomass transformation efforts. In this study, bagasse lignin was separated by freeze-thaw-assisted p-toluenesulfonic acid (p-TsOH) pretreatment. The optimal conditions were freezing temperature -60 °C, freezing time 8.0 h, thawing temperature 15 °C, p-TsOH concentration 60%, pretreatment temperature 70 °C, and time 20 min. Lower acid concentrations and temperatures were used compared with traditional p-TsOH pretreatment. The efficiency and selectivity of lignin separation were improved. It was attributed to freeze-thawing, which provided a more efficient physical channel for the effective penetration of p-TsOH. The separation, extraction and purity of lignin were improved to 89.76%, 78.22% and 77.89%, respectively. High separation, high extraction, high purity and large molecular weight lignin samples were obtained. In addition, the recovery and reuse of p-TsOH was enhanced. This provided a new method for the efficient and clean separation of lignin.

Enzymatic conversion of pretreated lignocellulosic biomass: A review on influence of structural changes of lignin

The demands of energy sustainability drive efforts to bio-chemical conversion of biomass into biofuels through pretreatment, enzymatic hydrolysis, and microbial fermentation. Pretreatment leads to significant structural changes of the complex lignin polymer that affect yield and productivity of the enzymatic conversion of lignocellulosic biomass. Structural changes of lignin after pretreatment include functional groups, inter unit linkages and compositions. These changes influence non-productive adsorption of enzyme on lignin through hydrophobic interaction and electrostatic interaction as well as hydrogen bonding. This paper reviews the relationships between structural changes of lignin and enzymatic hydrolysis of pretreated lignocellulosic biomass. The formation of pseudo-lignin during dilute acid pretreatment is revealed, and their negative effect on enzymatic hydrolysis is discussed.

Material utilization of green waste: a review on potential valorization methods

Considering global developments like climate change and the depletion of fossil resources, the use of new and sustainable feedstocks such as lignocellulosic biomass becomes inevitable. Green waste comprises heterogeneous lignocellulosic biomass with low lignin content, which does not stem from agricultural processes or purposeful cultivation and therefore mainly arises in urban areas. So far, the majority of green waste is being composted or serves as feedstock for energy production. Here, the hitherto untapped potential of green waste for material utilization instead of conventional recycling is reviewed. Green waste is a promising starting material for the direct extraction of valuable compounds, the chemical and fermentative conversion into basic chemicals as well as the manufacturing of functional materials like electrodes for electro-biotechnological applications through carbonization. This review serves as a solid foundation for further work on the valorization of green waste.