Long-Range Modulations of Electric Fields in Proteins

The Effect of Phosphoserine-Containing Membranes on Electrostatic Fields at the Protein-Protein Interface Measured through Vibrational Stark Effect Spectroscopy

In the cell, Ras GTPases function as membrane-bound molecular switches for a variety of cell signaling pathways. Ras isoforms have long been of interest because of the connection between amino acid mutations and tumorigenesis. Much research focused on Ras has used truncated, solubilized constructs, which exclude the membrane-binding domain and therefore ignore the effects of membrane binding on Ras function. Since the membrane is a highly charged surface, it could have a significant impact on the electrostatic environment at or near the protein-protein interface. Here, we use a thiocyanate probe chemically inserted into the Ras-binding domain of RalGDS to investigate the effect of membrane binding at the Ras active site. Changes in the electric field caused by the membrane were measured by the probe as vibrational energy shifts in the infrared (IR) spectrum. For a selection of mutants which caused large shifts at this interface on the soluble H-Ras construct, binding to a 30% phosphatidylserine (PS)/70% phosphatidylcholine (PC) nanodisc caused reduced shifts compared to the solubilized counterparts. Additionally, the vibrational probe bonded to the wildtype (WT) Ras construct demonstrated a shift of 0.7 cm-1 as a PC nanodisc was doped from 0% to 30% PS, but mutations introduced to the Ras active site caused the probe to show no shift across these PS concentrations. These results indicate that the local membrane environment has an effect on the electrostatics at the Ras active site and needs to be considered when investigating the effect of oncogenic mutations on Ras function.

Cyanophenylalanine as an Infrared Probe for Iron-Sulfur Cluster Redox State in Multicenter Metalloenzymes

The noncanonical amino acid, para-cyanophenylalanine (CNF), when incorporated into metalloproteins, functions as an infrared spectroscopic probe for the redox state of iron-sulfur clusters, offering a strategy for determining electron occupancy in the electron transport chains of complex metalloenzymes. A redshift of ≈1-2 cm-1 in the nitrile (NC) stretching frequency is observed, following reduction of spinach ferredoxin modified to contain CNF close to its [2Fe-2S] center, and this shift is reversed on re-oxidation. We extend this to CNF positioned near to the proximal [4Fe-4S] cluster of the [FeFe] hydrogenase from Desulfovibrio desulfuricans. In combination with a distal [4Fe-4S] cluster and the [4Fe-4S] cluster of the active site 'H-cluster' ([4Fe-4S]H), the proximal cluster forms an electron relay connecting the active site to the surface of the protein. Again, a reversible shift in wavenumber for CNF is observed, following cluster reduction in either apo-protein (containing the iron-sulfur clusters but lacking the active site) or holo-protein with intact active site, demonstrating the general applicability of this approach to studying complex metalloenzymes.

Methods for Theoretical Treatment of Local Fields in Proteins and Enzymes

Electric fields generated by protein scaffolds are crucial in enzymatic catalysis. This review surveys theoretical approaches for detecting, analyzing, and comparing electric fields, electrostatic potentials, and their effects on the charge density within enzyme active sites. Pioneering methods like the empirical valence bond approach rely on evaluating ionic and covalent resonance forms influenced by the field. Strategies employing polarizable force fields also facilitate field detection. The vibrational Stark effect connects computational simulations to experimental Stark spectroscopy, enabling direct comparisons. We highlight how protein dynamics induce fluctuations in local fields, influencing enzyme activity. Recent techniques assess electric fields throughout the active site volume rather than only at specific bonds, and machine learning helps relate these global fields to reactivity. Quantum theory of atoms in molecules captures the entire electron density landscape, providing a chemically intuitive perspective on field-driven catalysis. Overall, these methodologies show protein-generated fields are highly dynamic and heterogeneous, and understanding both aspects is critical for elucidating enzyme mechanisms. This holistic view empowers rational enzyme engineering by tuning electric fields, promising new avenues in drug design, biocatalysis, and industrial applications. Future directions include incorporating electric fields as explicit design targets to enhance catalytic performance and biochemical functionalities.

Electric Field Cycling of Physisorbed Antibodies Reduces Biolayer Polarization Dispersion

The electric dipoles of proteins in a biolayer determine their dielectric properties through the polarization density P. Hence, its reproducibility is crucial for applications, particularly in bioelectronics. Biolayers encompassing capturing antibodies covalently bound at a biosensing interface are generally preferred for their assumed higher stability. However, surface physisorption is shown to offer advantages like easily scalable fabrication processes and high stability. The present study investigates the effects of electric-field (EF)-cycling of anti-Immunoglobulin M (anti-IgM) biolayers physisorbed on Au. The impact of EF-cycling on the dielectric, optical, and mechanical properties of anti-IgM biolayer is investigated. A reduction of the dispersion (standard deviation over a set of 31 samples) of the measured P values is observed, while the set median stays almost constant. Hence, physisorption combined with EF cycling, results in a biolayer with highly reproducible bioelectronic properties. Additionally, the study provides important insights into the mechanisms of dielectric rearrangement of dipole moments in capturing biolayers after EF-cycling. Notably, EF-cycling acts as an annealing process, driving the proteins in the biolayer into a statistically more probable and stable conformational state. Understanding these phenomena enhances the knowledge of the properties of physisorbed biolayers and can inform design strategies for bioelectronic devices.

Hydrogen Bond Blueshifts in Nitrile Vibrational Spectra Are Dictated by Hydrogen Bond Geometry and Dynamics

Vibrational Stark effect (VSE) spectroscopy has become one of the most important experimental approaches to determine the strength of noncovalent, electrostatic interactions in chemistry and biology and to quantify their influence on structure and reactivity. Nitriles (C≡N) have been widely used as VSE probes, but their application has been complicated by an anomalous hydrogen bond (HB) blueshift which is not encompassed within the VSE framework. We present an empirical model describing the anomalous HB blueshift in terms of H-bonding geometry, i.e., as a function of HB distance and angle with respect to the C≡N group. This model is obtained by comparing vibrational observables from density functional theory and electrostatics from the polarizable AMOEBA force field, and it provides a physical explanation for the HB blueshift in terms of underlying multipolar and Pauli repulsion contributions. Additionally, we compare predicted blueshifts with experimental results and find our model provides a useful, direct framework to analyze HB geometry for rigid HBs, such as within proteins or chemical frameworks. In contrast, nitriles in highly dynamic H-bonding environments like protic solvents are no longer a function solely of geometry; this is a consequence of motional narrowing, which we demonstrate by simulating IR spectra. Overall, when HB geometry and dynamics are accounted for, an excellent correlation is found between observed and predicted HB blueshifts. This correlation includes different types of nitriles and HB donors, suggesting that our model is general and can aid in understanding HB blueshifts wherever nitriles can be implemented.

Evaluating aliphatic CF, CF2, and CF3 groups as vibrational Stark effect reporters

Given the extensive use of fluorination in molecular design, it is imperative to understand the solvation properties of fluorinated compounds and the impact of the C-F bond on electrostatic interactions. Vibrational spectroscopy can provide direct insights into these interactions by using the C-F bond stretching [v(C-F)] as an electric field probe through the vibrational Stark effect (VSE). In this work, we explore the VSE of the three basic patterns of aliphatic fluorination, i.e., mono-, di-, and trifluorination in CF, CF2, and CF3 groups, respectively, and compare their response to the well-studied aromatic v(C-F). Magnitudes (i.e., Stark tuning rates) and orientations of the difference dipole vectors of the v(C-F)-containing normal modes were determined using density functional theory and a molecular dynamics (MD)-assisted solvatochromic analysis of model compounds in solvents of varying polarity. We obtain Stark tuning rates of 0.2-0.8 cm-1/(MV/cm), with smallest and largest electric field sensitivities for CFaliphatic and CF3,aliphatic, respectively. While average electric fields of solvation were oriented along the main symmetry axis of the CFn, and thus along its static dipole, the Stark tuning rate vectors were tilted by up to 87° potentially enabling to map electrostatics in multiple dimensions. We discuss the influence of conformational heterogeneity on spectral shifts and point out the importance of multipolar and/or polarizable MD force fields to describe the electrostatics of fluorinated molecules. The implications of this work are of direct relevance for studies of fluorinated molecules as found in pharmaceuticals, fluorinated peptides, and proteins.

Unnatural Amino Acids for Biological Spectroscopy and Microscopy

Due to advances in methods for site-specific incorporation of unnatural amino acids (UAAs) into proteins, a large number of UAAs with tailored chemical and/or physical properties have been developed and used in a wide array of biological applications. In particular, UAAs with specific spectroscopic characteristics can be used as external reporters to produce additional signals, hence increasing the information content obtainable in protein spectroscopic and/or imaging measurements. In this Review, we summarize the progress in the past two decades in the development of such UAAs and their applications in biological spectroscopy and microscopy, with a focus on UAAs that can be used as site-specific vibrational, fluorescence, electron paramagnetic resonance (EPR), or nuclear magnetic resonance (NMR) probes. Wherever applicable, we also discuss future directions.

Critical Evaluation of Polarizable and Nonpolarizable Force Fields for Proteins Using Experimentally Derived Nitrile Electric Fields

Molecular dynamics (MD) simulations are frequently carried out for proteins to investigate the role of electrostatics in their biological function. The choice of force field (FF) can significantly alter the MD results, as the simulated local electrostatic interactions lack benchmarking in the absence of appropriate experimental methods. We recently reported that the transition dipole moment (TDM) of the popular nitrile vibrational probe varies linearly with the environmental electric field, overcoming well-known hydrogen bonding (H-bonding) issues for the nitrile frequency and, thus, enabling the unambiguous measurement of electric fields in proteins (J. Am. Chem. Soc. 2022, 144 (17), 7562-7567). Herein, we utilize this new strategy to enable comparisons of experimental and simulated electric fields in protein environments. Specifically, previously determined TDM electric fields exerted onto nitrile-containing o-cyanophenylalanine residues in photoactive yellow protein are compared with MD electric fields from the fixed-charge AMBER FF and the polarizable AMOEBA FF. We observe that the electric field distributions for H-bonding nitriles are substantially affected by the choice of FF. As such, AMBER underestimates electric fields for nitriles experiencing moderate field strengths; in contrast, AMOEBA robustly recapitulates the TDM electric fields. The FF dependence of the electric fields can be partly explained by the presence of additional negative charge density along the nitrile bond axis in AMOEBA, which is due to the inclusion of higher-order multipole parameters; this, in turn, begets more head-on nitrile H-bonds. We conclude by discussing the implications of the FF dependence for the simulation of nitriles and proteins in general.

On the Role of a Conserved Tryptophan in the Chromophore Pocket of Cyanobacteriochrome

The cyanobacteriochrome Slr1393 can be photoconverted between a red (Pr) and green absorbing form (Pg). The recently determined crystal structures of both states suggest a major movement of Trp496 from a stacking interaction with ring D of the phycocyanobilin (PCB) chromophore in Pr to a position outside the chromophore pocket in Pg. Here, we investigated the role of this amino acid during photoconversion in solution using engineered protein variants in which Trp496 was substituted by natural and non-natural amino acids. These variants and the native protein were studied by various spectroscopic techniques (UV-vis absorption, fluorescence, IR, NIR and UV resonance Raman) complemented by theoretical approaches. Trp496 is shown to affect the electronic transition of PCB and to be essential for the thermal equilibrium between Pr and an intermediate state O600. However, Trp496 is not required to stabilize the tilted orientation of ring D in Pr, and does not play a role in the secondary structure changes of Slr1393 during the Pr/Pg transition. The present results confirm the re-orientation of Trp496 upon Pr → Pg conversion, but do not provide evidence of a major change in the microenvironment of this residue. Structural models indicate the penetration of water molecules into the chromophore pocket in both Pr and Pg states and thus water-Trp contacts, which can readily account for the subtle spectral changes between Pr and Pg. Thus, we conclude that reorientation of Trp496 during the Pr-to-Pg photoconversion in solution is not associated with a major change in the dielectric environment in the two states.

Electro-inductive Effect Dominates Vibrational Frequency Shifts of Conjugated Probes on Gold Electrodes

Interfacial electric fields play a critical role in electrocatalysis and are often characterized by using vibrational probes attached to an electrode surface. Understanding the physical principles dictating the impact of the applied electrode potential on the vibrational probe frequency is important. Herein, a comparative study is performed for two molecular probes attached to a gold electrode. Both probes contain a nitrile (CN) group, but 4-mercaptobenzonitrile (4-MBN) exhibits continuous conjugation from the electrode through the nitrile group, whereas this conjugation is interrupted for 2-(4-mercaptophenyl)acetonitrile (4-MPCN). Periodic density functional theory calculations predict that the CN vibrational frequency shift of the 4-MBN system is dominated by induction, which is a through-bond polarization effect, leading to a strong potential dependence that does not depend significantly on the orientation of the CN bond relative to the surface. In contrast, the CN vibrational frequency shift of the 4-MPCN system is influenced less by induction and more by through-space electric field effects, leading to a weaker potential dependence and a greater orientation dependence. These theoretical predictions were confirmed by surface-enhanced Raman spectroscopy experiments. Balancing through-bond and through-space electrostatic effects may assist in the fundamental understanding and design of electrocatalytic systems.

Electrochemistry in sensing of molecular interactions of proteins and their behavior in an electric field

Electrochemical methods can be used not only for the sensitive analysis of proteins but also for deeper research into their structure, transport functions (transfer of electrons and protons), and sensing their interactions with soft and solid surfaces. Last but not least, electrochemical tools are useful for investigating the effect of an electric field on protein structure, the direct application of electrochemical methods for controlling protein function, or the micromanipulation of supramolecular protein structures. There are many experimental arrangements (modalities), from the classic configuration that works with an electrochemical cell to miniaturized electrochemical sensors and microchip platforms. The support of computational chemistry methods which appropriately complement the interpretation framework of experimental results is also important. This text describes recent directions in electrochemical methods for the determination of proteins and briefly summarizes available methodologies for the selective labeling of proteins using redox-active probes. Attention is also paid to the theoretical aspects of electron transport and the effect of an external electric field on the structure of selected proteins. Instead of providing a comprehensive overview, we aim to highlight areas of interest that have not been summarized recently, but, at the same time, represent current trends in the field.

Vibrational Spectroscopy of Phytochromes

Phytochromes are biological photoswitches that translate light into physiological functions. Spectroscopic techniques are essential tools for molecular research into these photoreceptors. This review is directed at summarizing how resonance Raman and IR spectroscopy contributed to an understanding of the structure, dynamics, and reaction mechanism of phytochromes, outlining the substantial experimental and theoretical challenges and describing the strategies to master them. It is shown that the potential of the various vibrational spectroscopic techniques can be most efficiently exploited using integral approaches via a combination of theoretical methods as well as other experimental techniques.

Electric field-induced functional changes in electrode-immobilized mutant species of human cytochrome c

Post-translational modifications and naturally occurring mutations of cytochrome c have been recognized as a regulatory mechanism to control its biology. In this work, we investigate the effect of such in vivo chemical modifications of human cytochrome c on its redox properties in the adsorbed state onto an electrode. In particular, tyrosines 48 and 97 have been replaced by the non-canonical amino acid p-carboxymethyl-L-phenylalanine (pCMF), thus mimicking tyrosine phosphorylation. Additionally, tyrosine 48 has been replaced by a histidine producing the natural Y48H pathogenic mutant. Thermodynamics and kinetics of the interfacial electron transfer of wild-type cytochrome c and herein produced variants, adsorbed electrostatically under different local interfacial electric fields, were determined by means of variable temperature cyclic film voltammetry. It is shown that non-native cytochrome c variants immobilized under a low interfacial electric field display redox thermodynamics and kinetics similar to those of wild-type cytochrome c. However, upon increasing the strength of the electric field, the redox thermodynamics and kinetics of the modified proteins markedly differ from those of the wild-type species. The mutations promote stabilization of the oxidized form and a significant increase in the activation enthalpy values that can be ascribed to a subtle distortion of the heme cofactor and/or difference of the amino acid rearrangements rather than to a coarse protein structural change. Overall, these results point to a combined effect of the single point mutations at positions 48 and 97 and the strength of electrostatic binding on the regulatory mechanism of mitochondrial membrane activity, when acting as a redox shuttle protein.

Potential Distribution across Model Membranes

Membrane models assembled on electrodes are widely used tools to study potential-dependent molecular processes at or in membranes. However, the relationship between the electrode potential and the potential across the membrane is not known. Here we studied lipid bilayers immobilized on mixed self-assembled monolayers (SAM) on Au electrodes. The mixed SAM was composed of thiol derivatives of different chain lengths such that between the islands of the short one, mercaptobenzonitrile (MBN), and the tethered lipid bilayer an aqueous compartment was formed. The nitrile function of MBN, which served as a reporter group for the vibrational Stark effect (VSE), was probed by surface-enhanced infrared absorption spectroscopy to determine the local electric field as a function of the electrode potential for pure MBN, mixed SAM, and the bilayer system. In parallel, we calculated electric fields at the VSE probe by molecular dynamics (MD) simulations for different charge densities on the metal, thereby mimicking electrode potential changes. The agreement with the experiments was very good for the calculations of the pure MBN SAM and only slightly worse for the mixed SAM. The comparison with the experiments also guided the design of the bilayer system in the MD setups, which were selected to calculate the electrode potential dependence of the transmembrane potential, a quantity that is not directly accessible by the experiments. The results agree very well with estimates in previous studies and thus demonstrate that the present combined experimental-theoretical approach is a promising tool for describing potential-dependent processes at biomimetic interfaces.

pH-induced insertion of pHLIP into a lipid bilayer: In-situ SEIRAS characterization of a folding intermediate at neutral pH

The pH low insertion peptide (pHLIP) is a pH-sensitive cell penetrating peptide that transforms from an unstructured coil on the membrane surface at pH > 7, to a transmembrane (TM) α-helix at pH < 5. By exploiting this unique property, pHLIP attracts interest as a potential tool for drug delivery and visualisation of acidic tissues produced by various maladies such as cancer, inflammation, hypoxia etc. Even though the structures of initial and end states of pHLIP insertion have been widely accepted, the intermediate structures in between these two states are less clear. Here, we have applied in situ Surface-Enhanced Infrared Absorption spectroscopy to examine the pH-induced insertion and folding processes of pHLIP into a solid-supported lipid bilayer. We show that formation of partially helical structure already takes place at pH only slightly below 7.0, but with the helical axis parallel to the membrane surface. The peptide starts to reorientate its helix from horizontal to vertical direction, accompanied by the insertion into the TM region at pH < 6.2. Further insertion into the TM region of the peptide results in an increase of inherent α-helical structure and complete secondary structure formation at pH 5.3. Analysis of the changes of the carboxylate vibrational bands upon pH titration shows two distinctive groups of aspartates and glutamates with pK_a values of 4.5 and 6.3, respectively. Comparison to the amide bands of the peptide backbone suggests that the latter Asp/Glu groups are directly involved in the conformational changes of pHLIP in the respective intermediate states.

Effects of an Electric Field on the Conformational Transition of the Protein: Pulsed and Oscillating Electric Fields with Different Frequencies

The effect of pulsed and oscillating electric fields with different frequencies on the conformational properties of all-α proteins was investigated by molecular dynamics simulations. The root mean square deviation, the root mean square fluctuation, the dipole moment distribution, and the secondary structure analysis were used to assess the protein samples’ structural characteristics. In the simulation, we found that the higher frequency of the electric field influences the rapid response to the secondary structural transitions. However, the conformational changes measured by RMSD are diminished by applying the electrical field with a higher frequency. During the dipole moment analysis, we found that the magnitude and frequency of the dipole moment was directly related to the strength and frequency of the external electric field. In terms of the type of electric fields, we found that the average values of RMSD and RMSF of whole molecular protein are larger when the protein is exposed in the pulsed electric field. Concerning the typical sample 1BBL, the secondary structure analysis showed that two alpha-helix segments both transit to turns or random coils almost simultaneously when it is exposed in a pulsed electric field. Meanwhile, two segments present the different characteristic times when the transition occurs in the condition of an oscillating electric field. This study also demonstrated that the protein with fewer charged residues or more residues in forming α-helical structures display the higher conformational stability. These conclusions, achieved using MD simulations, provide a theoretical understanding of the effect of the frequency and expression form of external electric fields on the conformational changes of the all-α proteins with charged residues and the guidance for anticipative applications.

Local Electric Field Changes during the Photoconversion of the Bathy Phytochrome Agp2

Phytochromes switch between a physiologically inactive and active state via a light-induced reaction cascade, which is initiated by isomerization of the tetrapyrrole chromophore and leads to the functionally relevant secondary structure transition of a protein segment (tongue). Although details of the underlying cause-effect relationships are not known, electrostatic fields are likely to play a crucial role in coupling chromophores and protein structural changes. Here, we studied local electric field changes during the photoconversion of the dark state Pfr to the photoactivated state Pr of the bathy phytochrome Agp2. Substituting Tyr165 and Phe192 in the chromophore pocket by para-cyanophenylalanine (pCNF), we monitored the respective nitrile stretching modes in the various states of photoconversion (vibrational Stark effect). Resonance Raman and IR spectroscopic analyses revealed that both pCNF-substituted variants undergo the same photoinduced structural changes as wild-type Agp2. Based on a structural model for the Pfr state of F192pCNF, a molecular mechanical-quantum mechanical approach was employed to calculate the electric field at the nitrile group and the respective stretching frequency, in excellent agreement with the experiment. These calculations serve as a reference for determining the electric field changes in the photoinduced states of F192pCNF. Unlike F192pCNF, the nitrile group in Y165pCNF is strongly hydrogen bonded such that the theoretical approach is not applicable. However, in both variants, the largest changes of the nitrile stretching modes occur in the last step of the photoconversion, supporting the view that the proton-coupled restructuring of the tongue is accompanied by a change of the electric field.

Ewald sum corrections in simulations of ion and dipole solvation and electron transfer

Periodic boundary conditions and Ewald sums used in standard simulation protocols require finite-size corrections when the total charge of the simulated system is nonzero. Corrections for ion solvation were introduced by Hummer, Pratt, and García, [J. Chem. Phys. 107, 9275 (1997)]. The latter approach is extended here to derive finite-size correction for the Stokes-shift and reorganization energy applied to electron-transfer reactions. The same correction term, scaling inversely with the box size, adds to the reorganization energy from the energy-gap variance but is subtracted from the reorganization energy calculated from the Stokes shift. Finite-size corrections thus widen the gap between these two quantities, which were recently found to diverge for protein electron transfer. Corrections to the free energy of dipole solvation and the variance of the electric field scale as m²/L³ with the solute dipole m and the box size L.

Measuring the Multiscale Dynamics, Structure, and Function of Biomolecules at Interfaces

The individual and collective structure and properties of biomolecules can change dramatically when they are localized at an interface. However, the small spatial extent of interfacial regions poses challenges to the detailed characterization of multiscale processes that dictate the structure and function of large biological units such as peptides, proteins, or nucleic acids. This Perspective surveys a broad set of tools that provide new opportunities to probe complex, dynamic interfaces across the vast range of temporal regimes that connect molecular-scale events to macroscopic observables. An emphasis is placed on the integration over multiple time scales, the use of complementary techniques, and the incorporation of external stimuli to control interfacial properties with spatial, temporal, and chemical specificity.

Testing the Limitations of MD-Based Local Electric Fields Using the Vibrational Stark Effect in Solution: Penicillin G as a Test Case

Noncovalent interactions underlie nearly all molecular processes in the condensed phase from solvation to catalysis. Their quantification within a physically consistent framework remains challenging. Experimental vibrational Stark effect (VSE)-based solvatochromism can be combined with molecular dynamics (MD) simulations to quantify the electrostatic forces in solute-solvent interactions for small rigid molecules and, by extension, when these solutes bind in enzyme active sites. While generalizing this approach toward more complex (bio)molecules, such as the conformationally flexible and charged penicillin G (PenG), we were surprised to observe inconsistencies in MD-based electric fields. Combining synthesis, VSE spectroscopy, and computational methods, we provide an intimate view on the origins of these discrepancies. We observe that the electric fields are correlated to conformation-dependent effects of the flexible PenG side chain, including both the local solvation structure and solute conformational sampling in MD. Additionally, we identified that MD-based electric fields are consistently overestimated in three-point water models in the vicinity of charged groups; this cannot be entirely ameliorated using polarizable force fields (AMOEBA) or advanced water models. This work demonstrates the value of the VSE as a direct method for experiment-guided refinements of MD force fields and establishes a general reductionist approach to calibrating vibrational probes for complex (bio)molecules.

Substrates Modulate Charge-Reorganization Allosteric Effects in Protein-Protein Association

Protein function may be modulated by an event occurring far away from the functional site, a phenomenon termed allostery. While classically allostery involves conformational changes, we recently observed that charge redistribution within an antibody can also lead to an allosteric effect, modulating the kinetics of binding to target antigen. In the present work, we study the association of a polyhistidine tagged enzyme (phosphoglycerate kinase, PGK) to surface-immobilized anti-His antibodies, finding a significant Charge-Reorganization Allostery (CRA) effect. We further observe that PGK's negatively charged nucleotide substrates modulate CRA substantially, even though they bind far away from the His-tag-antibody interaction interface. In particular, binding of ATP reduces CRA by more than 50%. The results indicate that CRA is affected by the binding of charged molecules to a protein and provide further insight into the significant role that charge redistribution can play in protein function.

In Situ Spectroelectrochemical Investigations of Electrode-Confined Electron-Transferring Proteins and Redox Enzymes

This perspective analyzes recent advances in the spectroelectrochemical investigation of redox proteins and enzymes immobilized on biocompatible or biomimetic electrode surfaces. Specifically, the article highlights new insights obtained by surface-enhanced resonance Raman (SERR), surface-enhanced infrared absorption (SEIRA), protein film infrared electrochemistry (PFIRE), polarization modulation infrared reflection-absorption spectroscopy (PMIRRAS), Förster resonance energy transfer (FRET), X-ray absorption spectroscopy (XAS), electron paramagnetic resonance (EPR), and differential electrochemical mass spectrometry (DMES)-based spectroelectrochemical methods on the structure, orientation, dynamics, and reaction mechanisms for a variety of immobilized species. This includes small heme and copper electron shuttling proteins, large respiratory complexes, hydrogenases, multicopper oxidases, alcohol dehydrogenases, endonucleases, NO-reductases, and dye decolorizing peroxidases, among other enzymes. Finally, I discuss the challenges and foreseeable future developments toward a better understanding of the functioning of these complex macromolecules and their exploitation in technological devices.

Assessing the Effect of Hofmeister Anions on the Hydrogen-Bonding Strength of Water via Nitrile Stretching Frequency Shift

The temperature dependence of the peak frequency (ν_max) of the C≡N stretching vibrational spectrum of a hydrogen-bonded C≡N species is known to be a qualitative measure of its hydrogen-bonding strength. Herein, we show that within a two-state framework, this dependence can be analyzed in a more quantitative manner to yield the enthalpy and entropy changes (ΔH_HB and ΔS_HB) for the corresponding hydrogen-bonding interactions. Using this method, we examine the effect of ten common anions on the strength of the hydrogen-bond(s) formed between water and the C≡N group of an unnatural amino acid, p-cyanophenylalanine (Phe_CN). We find that based on the ΔH_HB values, these anions can be arranged in the following order: HPO₄^2- > OAc^- > F^- > SO₄^2- ≈ Cl^- ≈ (H₂O) ≈ ClO₄^- ≈ NO₃^- > Br^- > SCN^- ≈ I^-, which differs from the corresponding Hofmeister series. Because Phe_CN has a relatively small size, the finding that anions having very different charge densities (e.g., SO₄^2- and ClO₄^-) act similarly suggests that this ranking order is likely the result of specific ion effects. Since proteins contain different backbone and side-chain units, our results highlight the need to assess their individual contributions toward the overall Hofmeister effect in order to achieve a microscopic understanding of how ions affect the physical and chemical properties of such macromolecules. In addition, the analytical method described in the present study is applicable for analyzing the spectral evolution of any vibrational spectra composed of two highly overlapping bands.

Vibrational Spectroscopic Map, Vibrational Spectroscopy, and Intermolecular Interaction

Vibrational spectroscopy is an essential tool in chemical analyses, biological assays, and studies of functional materials. Over the past decade, various coherent nonlinear vibrational spectroscopic techniques have been developed and enabled researchers to study time-correlations of the fluctuating frequencies that are directly related to solute-solvent dynamics, dynamical changes in molecular conformations and local electrostatic environments, chemical and biochemical reactions, protein structural dynamics and functions, characteristic processes of functional materials, and so on. In order to gain incisive and quantitative information on the local electrostatic environment, molecular conformation, protein structure and interprotein contacts, ligand binding kinetics, and electric and optical properties of functional materials, a variety of vibrational probes have been developed and site-specifically incorporated into molecular, biological, and material systems for time-resolved vibrational spectroscopic investigation. However, still, an all-encompassing theory that describes the vibrational solvatochromism, electrochromism, and dynamic fluctuation of vibrational frequencies has not been completely established mainly due to the intrinsic complexity of intermolecular interactions in condensed phases. In particular, the amount of data obtained from the linear and nonlinear vibrational spectroscopic experiments has been rapidly increasing, but the lack of a quantitative method to interpret these measurements has been one major obstacle in broadening the applications of these methods. Among various theoretical models, one of the most successful approaches is a semiempirical model generally referred to as the vibrational spectroscopic map that is based on a rigorous theory of intermolecular interactions. Recently, genetic algorithm, neural network, and machine learning approaches have been applied to the development of vibrational solvatochromism theory. In this review, we provide comprehensive descriptions of the theoretical foundation and various examples showing its extraordinary successes in the interpretations of experimental observations. In addition, a brief introduction to a newly created repository Web site (http://frequencymap.org) for vibrational spectroscopic maps is presented. We anticipate that a combination of the vibrational frequency map approach and state-of-the-art multidimensional vibrational spectroscopy will be one of the most fruitful ways to study the structure and dynamics of chemical, biological, and functional molecular systems in the future.

Why are Vibrational Lines Narrow in Proteins?

The vibrational Stark effect in proteins yields line shifts indicative of strong internal electric fields up to a few volts per angstrom. These values are supported by numerical simulations of proteins. The simulations also show a significant breadth of field fluctuations translating to inhomogeneous broadening of vibrational lines. According to fluctuation-dissipation arguments, strong internal fields should lead to broad lines. Experimentally reported vibrational lines in proteins are, however, very narrow. This disconnect is explained here in terms of the insufficient (nonergodic) sampling of the protein's configurations on the lifetime of the vibrational probe. The slow component of the electric field fluctuations in proteins relaxes on the time scale of tens of nanoseconds and is dynamically frozen on the vibrational lifetime.

A Critical Evaluation of Vibrational Stark Effect (VSE) Probes with the Local Vibrational Mode Theory

Over the past two decades, the vibrational Stark effect has become an important tool to measure and analyze the in situ electric field strength in various chemical environments with infrared spectroscopy. The underlying assumption of this effect is that the normal stretching mode of a target bond such as CO or CN of a reporter molecule (termed vibrational Stark effect probe) is localized and free from mass-coupling from other internal coordinates, so that its frequency shift directly reflects the influence of the vicinal electric field. However, the validity of this essential assumption has never been assessed. Given the fact that normal modes are generally delocalized because of mass-coupling, this analysis was overdue. Therefore, we carried out a comprehensive evaluation of 68 vibrational Stark effect probes and candidates to quantify the degree to which their target normal vibration of probe bond stretching is decoupled from local vibrations driven by other internal coordinates. The unique tool we used is the local mode analysis originally introduced by Konkoli and Cremer, in particular the decomposition of normal modes into local mode contributions. Based on our results, we recommend 31 polyatomic molecules with localized target bonds as ideal vibrational Stark effect probe candidates.

Vibrational Stark Spectroscopy of Fluorobenzene Using Quantum Cascade Laser Dual Frequency Combs

We demonstrate the performance of a dual frequency comb quantum cascade laser (QCL) spectrometer for the application of vibrational Stark spectroscopy. Measurements performed on fluorobenzene with the dual-comb spectrometer (DCS) were compared to results obtained using a conventional Fourier transform infrared (FT-IR) instrument in terms of spectral response, parameter estimation, and signal-to-noise ratio (S/N). The dual-comb spectrometer provided similar qualitative and quantitative data as the FT-IR setup in 250 times shorter acquisition time. For fluorobenzene, the DCS measurement resulted in a more precise estimation of the fluorobenzene Stark tuning rate ((0.81 ± 0.09) cm^-1/(MV/cm)) than with the FT-IR system ((0.89 ± 0.15) cm^-1/(MV/cm)). Both values are in accordance with the previously reported value of 0.84 cm^-1/(MV/cm). We also point to an improvement of signal-to-noise ratio in the DCS configuration. Additional characteristics of the dual-comb spectrometer applicable to vibrational Stark spectroscopy and their scaling properties for future applications are discussed.

Tackling Achilles' Heel in Synthetic Biology: Pairing Intracellular Synthesis of Noncanonical Amino Acids with Genetic-Code Expansion to Foster Biotechnological Applications

For the last two decades, synthetic biologists have been able to unlock and expand the genetic code, generating proteins with unique properties through the incorporation of noncanonical amino acids (ncAAs). These evolved biomaterials have shown great potential for applications in industrial biocatalysis, therapeutics, bioremediation, bioconjugation, and other areas. Our ability to continue developing such technologies depends on having relatively easy access to ncAAs. However, the synthesis of enantiomerically pure ncAAs in practical quantitates for large-scale processes remains a challenge. Biocatalytic ncAA production has emerged as an excellent alternative to traditional organic synthesis in terms of cost, enantioselectivity, and sustainability. Moreover, biocatalytic synthesis offers the opportunity of coupling the intracellular generation of ncAAs with genetic-code expansion to overcome the limitations of an external supply of amino acid. In this minireview, we examine some of the most relevant achievements of this approach and its implications for improving technological applications derived from synthetic biology.

Electric Fields at Metal-Surfactant Interfaces: A Combined Vibrational Spectroscopy and Capacitance Study

Surfactants modulate interfacial processes. In electrochemical CO₂ reduction, cationic surfactants promote carbon product formation and suppress hydrogen evolution. The interfacial field produced by the surfactants affects the energetics of electrochemical intermediates, mandating their detailed understanding. We have used two complementary tools-vibrational Stark shift spectroscopy which probes interfacial fields at molecular length scales and electrochemical impedance spectroscopy (EIS) which probes the entire double layer-to study the electric fields at metal-surfactant interfaces. Using a nitrile as a probe, we found that at open-circuit potentials, cationic surfactants produce larger effective interfacial fields (∼-1.25 V/nm) when compared to anionic surfactants (∼0.4 V/nm). At a high bulk surfactant concentration, the surface field reaches a terminal value, suggesting the formation of a full layer, which is also supported by EIS. We propose an electrostatic model that explains these observations. Our results help in designing tailored surfactants for influencing electrochemical reactions via the interfacial field effect.

Tautomer Structures in Ketose-Aldose Transformation of 1,3-Dihydroxyacetone Studied by Infrared Electroabsorption Spectroscopy

The acyclic form of monosaccharides exists in a structural equilibrium, with aldose having the aldehyde group and ketose the ketone group (ketose-aldose equilibrium). A basic catalyst facilitates their transformation, which affects the chemical properties of the monosaccharide. In this study, we investigated the ketose-aldose transformation of 1,3-dihydroxyacetone (1,3-DHA), one of the simplest systems of the ketose-aldose equilibrium. We examined the effects of piperidine as the basic catalyst and used IR electroabsorption spectroscopy to study the responses to an external electric field. We analyzed the changes in IR absorption by considering the changes in the molecular orientation and number of molecules in response to the external electric field. The results of the analysis revealed the permanent dipole moment μ_P, an angle η between μ_P and μ_T (the transition moment of the molecular vibration), and the equilibrium constants. The ketose-aldose transformation of 1,3-DHA can be explained in terms of the equilibrium of three states. In the presence of piperidine, a five-state equilibrium was concluded. On the basis of the experimental data, we propose plausible models of dihydroxyacetone, E-enediols, Z-enediol, or glyceraldehyde for each state. The results of our structural analysis of these tautomers provide a detailed understanding of the ketose-aldose transformation of acyclic saccharides and the effects of the basic catalyst.

Probing Structure and Reaction Dynamics of Proteins Using Time-Resolved Resonance Raman Spectroscopy

The mechanistic understanding of protein functions requires insight into the structural and reaction dynamics. To elucidate these processes, a variety of experimental approaches are employed. Among them, time-resolved (TR) resonance Raman (RR) is a particularly versatile tool to probe processes of proteins harboring cofactors with electronic transitions in the visible range, such as retinal or heme proteins. TR RR spectroscopy offers the advantage of simultaneously providing molecular structure and kinetic information. The various TR RR spectroscopic methods can cover a wide dynamic range down to the femtosecond time regime and have been employed in monitoring photoinduced reaction cascades, ligand binding and dissociation, electron transfer, enzymatic reactions, and protein un- and refolding. In this account, we review the achievements of TR RR spectroscopy of nearly 50 years of research in this field, which also illustrates how the role of TR RR spectroscopy in molecular life science has changed from the beginning until now. We outline the various methodological approaches and developments and point out current limitations and potential perspectives.