All-Inorganic Copper Halide as a Stable and Self-Absorption-Free X-ray Scintillator

Exploring Non-Toxic Lower Dimensional Perovskites for Next-Generation X-Ray Detectors

Owing to their extraordinary photophysical properties, organometal halide perovskites are emerging as a new material class for X-ray detection. However, the existence of toxic lead makes their commercialization questionable and should readily be replaced. Accordingly, several lead alternatives have been introduced into the framework of conventional perovskites, resulting in various new perovskite dimensionalities. Among these, Pb-free lower dimensional perovskites (LPVKs) not only show promising X-ray detecting properties due to their higher ionic migration energy, wider and tunable energy bandgap, smaller dark currents, and structural versatility but also exhibit extended environmental stability. Herein, first, the structural organization of the PVKs (including LPVKs) is summarized. In the context of X-ray detectors (XDs), the outstanding properties of the LPVKs and active layer synthesis routes are elaborated afterward. Subsequently, their applications in direct XDs are extensively discussed and the device performance, in terms of the synthesis method, device architecture, active layer size, figure of merits, and device stability are tabulated. Finally, the review is concluded with an in-depth outlook, thoroughly exploring the present challenges to LPVKs XDs, proposing innovative solutions, and future directions. This review provides valuable insights into optimizing non-toxic Pb-free perovskite XDs, paving the way for future advancements in the field.

HCOO- Doping-Induced Multiexciton Emissions in Cs3Cu2I5 Crystals for Efficient X-Ray Scintillation

Self-trapped exciton (STE) luminescence, typically associated with structural deformation of excited states, has attracted significant attention in metal halide materials recently. However, the mechanism of multiexciton STE emissions in certain metal halide crystals remains largely unexplored. This study investigates dual luminescence emissions in HCOO- doped Cs3Cu2I5 single crystals using transient and steady-state spectroscopy. The dual emissions are attributed to intrinsic STE luminescence originating from the host lattice and extrinsic STE luminescence induced by external dopants, respectively, each of which can be triggered independently at distinct energy levels. Theoretical calculations reveal that multiexciton emission originates from structural distortion of the host and dopant STEs within the 0D lattice in their respective excited states. By meticulously tuning the excitation wavelength and selectively exciting different STEs, the dynamic alteration of color change in Cs3Cu2I5:HCOO- crystals is demonstrated. Ultimately, owing to an extraordinarily high photoluminescence quantum yield (99.01%) and a diminished degree of self-absorption in Cs3Cu2I5:HCOO- crystals, they exhibit remarkable X-ray scintillation characteristics with light yield being improved by 5.4 times as compared to that of pristine Cs3Cu2I5 crystals, opening up exciting avenues for achieving low-dose X-ray detection and imaging.

Near-Unity Green Luminescent Hybrid Manganese Halides as X-ray Scintillators

The increasing demands in optoelectronic applications have driven the advancement of organic-inorganic hybrid metal halides (OIMHs), owing to their exceptional optical and scintillation properties. Among them, zero-dimensional (0D) low-toxic manganese-based scintillators have garnered significant interest due to their exceptional optical transparency and elevated photoluminescence quantum yields (PLQYs), making them promising for colorful light-emitting diodes and X-ray imaging applications. In this study, two OIMH single crystals of (Br-PrTPP)2MnBr4 (Br-PrTPP = (3-bromopropyl) triphenylphosphonium) and (Br-BuTPP)2MnBr4 (Br-BuTPP = (4-bromobutyl) triphenylphosphonium) were prepared via a facile saturated crystallization method. Benefiting from the tetrahedrally coordinated [MnBr4]2- polyhedron, both of them exhibited strong green emissions peaked at 517 nm owing to the d-d electron transition of Mn2+ with near-unity PLQYs of 99.33 and 86.85%, respectively. Moreover, benefiting from the high optical transparencies and remarkable luminescence properties, these manganese halides also exhibit excellent radioluminescent performance with the highest light yield of up to 68,000 photons MeV-1, negligible afterglow (0.4 ms), and linear response to X-ray dose rate with the lowest detection limit of 45 nGyair s-1. In X-ray imaging, the flexible film made by the composite of (Br-PrTPP)2MnBr4 and PDMS shows an ultrahigh spatial resolution of 12.78 lp mm-1, which provides a potential visualization tool for X-ray radiography.

Unraveling the Origin of an Unusual Shift in the Electroluminescence of 1D CsCu2I3 Light-Emitting Diodes

Lead-free low-dimensional copper-based metal halides are promising luminescent materials for broadband LEDs owing to their broad self-trapped exciton (STE) emission. However, recently, in 1D CsCu2I3, a discrepancy between their electroluminescence (EL) and photoluminescence (PL) has been observed. As a result, the overall output color from LEDs is significantly different than the anticipated emission. To unveil the origin of this discrepancy, here, we provide comprehensive analyses and show that the shift in the EL is caused neither by any structural/optical interactions between CsCu2I3 and electron transport layers (ETL) nor by the degradation of 1D CsCu2I3. Instead, it depends on the carrier imbalance on CsCu2I3, mainly due to the difference in the electron mobility of the ETLs and the electron density on the CsCu2I3 layer. By varying the ETLs, different colored 1D CsCu2I3 LEDs with peaks at 556, 590, and 647 nm are fabricated, and a maximum luminance of over 2000 cd/m2 is achieved for a 556 nm LED. Further, by limiting the electron mobility and injection to 1D CsCu2I3 using an insulating LiF layer at the CsCu2I3/ETL interface, more red-shifted LEDs are achieved confirming the critical role of electron density on the EL characteristics of 1D CsCu2I3.

Yellow Emissive CsCu2I3 Nanocrystals Induced by Mn2+ for High-Resolution X-ray Imaging

Recently, low-dimensional copper(I)-based perovskite or derivatives have gained extensive attention in scintillator applications because of their environmental friendliness and good stabilities. However, the unsatisfactory scintillation performance and complex fabrication processes hindered their practical applications. Herein, efficient yellow emissive CsCu2I3 nanocrystals (NCs) were successfully prepared via a simple Mn2+-assisted hot-injection method. The added Mn2+ effectively induced the phase transformation from Cs3Cu2I5 to CsCu2I3, leading to the preparation of single-phase CsCu2I3 NCs with few defects and a high fluorescence performance. The as-prepared "optimal CsCu2I3 NCs" exhibited superior photoluminescence (PL) performance with a record-high PL quantum yield (PLQY) of 61.9%. The excellent fluorescence originated from the radiative recombination of strongly localized one-dimension (1D) self-trapped excitons (STEs), which was systematically investigated via the wavelength-dependent PL excitation, PL emission, and temperature-dependent PL spectra. These CsCu2I3 NCs also exhibited outstanding X-ray scintillation properties with a high light yield (32000 photons MeV-1) and an ultralow detection limit (80.2 nGyair s-1). Eventually, the CsCu2I3 NCs scintillator film achieved an ultrahigh (16.6 lp mm-1) spatial resolution in X-ray imaging. The CsCu2I3 NCs also exhibited good stabilities against X-ray irradiation, heat, and environmental storage, indicating their great application potential in flexible X-ray detection and imaging.

Scintillation and Optical Characterization of CsCu2I3 Single Crystals from 10 to 400 K

Currently only Eu2+-based scintillators have approached the light yield needed to improve the 2% energy resolution at 662 keV of LaBr3:Ce3+,Sr2+. Their major limitation, however, is the significant self-absorption due to Eu2+. CsCu2I3 is an interesting new small band gap scintillator. It is nonhygroscopic and nontoxic, melts congruently, and has an extremely low afterglow, a density of 5.01 g/cm3, and an effective atomic number of 50.6. It shows self-trapped exciton emission at room temperature. The large Stokes shift of this emission ensures that this material is not sensitive to self-absorption, tackling one of the major problems of Eu2+-based scintillators. An avalanche photo diode, whose optimal detection efficiency matches the 570 nm mean emission wavelength of CsCu2I3, was used to measure pulse height spectra. From the latter, a light yield of 36 000 photons/MeV and energy resolution of 4.82% were obtained. The scintillation proportionality of CsCu2I3 was found to be on par with that of SrI2:Eu2+. Based on temperature-dependent emission and decay measurements, it was demonstrated that CsCu2I3 emission is already about 50% quenched at room temperature. Using temperature-dependent pulse height measurements, it is shown that the light yield can be increased up to 60 000 photons/MeV by cooling to 200 K, experimentally demonstrating the scintillation potential of CsCu2I3. Below this temperature, the light yield starts to decrease, which can be linked to the unusually large increase in the band gap energy of CsCu2I3.

Dimension Tuning of All-Inorganic Ag-Based Metal Halides by Solvent Engineering

Dimension growth of metal halides is important for its properties and applications. However, such dimension control of the metal halides is rarely reported in the literature and the growth mechanism is not clear yet. A minute difference of solvent properties can tremendously alter the process of nucleation and growth of crystals. Herein, an intriguing phenomenon of dimension tuning for Ag-based metal halides is reported. The 1D Cs2 AgCl3 crystals can be obtained in pure DMF while the 2D CsAgCl2 crystals are obtained in pure DMSO. Both exhibit bright yellow emission, which are derived from self-trapping excitons (STEs). The photoluminescence quantum yield (PLQY) of Cs2 AgCl3 (1D) and CsAgCl2 (2D) are 28.46 % and 20.61 %, respectively. In order to understand the mechanism of the dimension change, additional solvents (N,N-dimethylacetamide, DMAC, 1,3-Dimethyl-Tetrahydropyrimidin-2(1H)-one, DMPU) are also selected to process the precursor for crystal growth. By comparing the functional group, dielectric constant, and donor number among the four solvents, we find the donor number plays the predominant role in nucleation process for Cs2 AgCl3 and CsAgCl2 . This research reveals the relationship between coordination ability of the solvent and the dimension of metal halides.

Recent Advances and Opportunities of Eco-Friendly Ternary Copper Halides: A New Superstar in Optoelectronic Applications

Recently, the newly-emerging lead-free metal-halide materials with less toxicity and superior optoelectronic properties have received wide attention as the safer and potentially more robust alternatives to lead-based perovskite counterparts. Among them, ternary copper halides (TCHs) have become a vital group due to their unique features, including abundant structural diversity, ease of synthesis, unprecedented optoelectronic properties, high abundance, and low cost. Although the recent efforts in this field have made certain progresses, some scientific and technological issues still remain unresolved. Herein, a comprehensive and up-to-date overview of recent progress on the fundamental characteristics of TCH materials and their versatile applications is presented, which contains topics such as: i) crystal and electronic structure features and synthesis strategies; ii) mechanisms of self-trapped excitons, luminescence regulation, and environmental stability; and iii) their burgeoning optoelectronic devices of phosphor-converted white light-emitting diodes (WLEDs), electroluminescent LEDs, anti-counterfeiting, X-ray scintillators, photodetectors, sensors, and memristors. Finally, the current challenges together with future perspectives on the development of TCH materials and applications are also critically described, which is considered to be critical for accelerating the commercialization of these rapidly evolving technologies.

A ligand strategy retarding monovalent copper oxidation toward achieving Cs3Cu2I5 perovskite emitters with enhanced stability for lighting

0D copper-based perovskites (Cs3Cu2I5) have fascinating optical properties, such as strong exciton binding energy, high photoluminescence quantum yield (PLQY) and large Stokes shifts from self-trapped excitons (STEs), which make them highly considerable candidates in the field of lighting. However, the stability of Cs3Cu2I5 is compromised by the oxidation of Cu+ to Cu2+ during the storage or operation process. Here, we proposed a ligand engineering strategy to improve the stability of Cs3Cu2I5via an organic molecule (ethylenediaminetetraacetic acid, EDTA) with multiple functional groups. The strong interaction between carboxyl groups and Cu+ was evidenced through FTIR and XPS, and it could retard monovalent copper oxidation. After storing for 90 days, the EDTA-engineered Cs3Cu2I5 (EDTA-Cs3Cu2I5) maintained its original crystalline structure, while the control Cs3Cu2I5 exhibited an impurity phase. Through quantitative analysis, the content of Cu2+ in EDTA-Cs3Cu2I5 was found to be 83.9% lower than that in control Cs3Cu2I5. Benefiting from the inhibition of Cu+ oxidation, EDTA-Cs3Cu2I5 exhibited improved light emission stability. For example, the optimized EDTA-Cs3Cu2I5 retained 74.7% of the initial photoluminescence (PL) intensity after 90-day storage under ambient conditions, while the pure Cs3Cu2I5 retained only 41.7%. Furthermore, EDTA could passivate defects and enhance the PL properties of the optimized Cs3Cu2I5, which showed a PLQY of 94.7%, much higher than that of 71.4% for pure Cs3Cu2I5. We further constructed a WLED based on the EDTA-engineered Cs3Cu2I5, which showed CIE at (0.3238, 0.3354), a CRI of 91.7, and a T50 of 361 h. The proposed EDTA ligand strategy provides a new way to regulate the light-emitting properties and stabilities of Cs3Cu2I5 for future industrialization.

Perovskite Scintillators for Improved X-ray Detection and Imaging

Halide perovskites (HPs) recently have emerged as one class of competitive scintillators for X-ray detection and imaging owing to its high quantum efficiency, short decay time, superior X-ray absorption capacity, low cost, and ease of crystal growth. The tunable structure and versatile chemical compositions of halide perovskites provide distinguishable advantages over traditional inorganic scintillators for optimizing scintillation performance. Since the first observation of the scintillation phenomenon in HPs, substantial efforts have been devoted to expanding the inventory of HP scintillators and regulating material properties. Understanding the relationship between the structure and scintillation properties of HP scintillators is essential for developing materials with improved X-ray detection and imaging capacities. This review summarizes strategies for improving the light yield of HP scintillators and provides a roadmap for improving the X-ray imaging performance. Additionally, methods for controlling the light propagation direction in HP scintillators are highlighted for improving X-ray imaging resolution. Finally, we highlight the current challenge in HP scintillators and provide a perspective on the future development of this emerging scintillator.

One-Dimensional Hybrid Copper(I) Iodide Single Crystal with Renewable Scintillation Properties

Low-dimensional hybrid copper(I) halides attract considerable attention in the field of light emissions. In this work, we obtained the centimeter-sized single crystal of 1,3-propanediamine copper(I) iodide (PDACuI₃) with a solvent evaporation method. The single crystal X-ray diffraction of PDACuI₃ reveals that the [CuI₄] tetrahedra form the corner-connected chains separated by PDAs, forming a one-dimensional structure with an orthorhombic space group of Pbca. The band gap is determined to be 4.03 eV, and the room temperature photoluminescence (PL) quantum yield is determined to be 26.5%. The thermal quenching and negative thermal quenching of emission are observed via temperature-dependent PL spectra, and our study shows that the intermediate nonradiative state below the self-trapped exciton state may get involved in these temperature-dependent behaviors. The X-ray scintillation performance of PDACuI₃ single crystals is also evaluated, and the relative light output renewed to 94.3% of the fresh one after a low-temperature annealing. On the basis of our results, PDACuI₃ single crystals provide nontoxicity and renewable scintillation performance, thus showing potential application in the area of low-cost radiation detectors.

Zero-Dimensional Broadband Yellow Light Emitter (TMS)3Cu2I5 for Latent Fingerprint Detection and Solid-State Lighting

We report a new hybrid organic-inorganic Cu(I) halide, (TMS)₃Cu₂I₅ (TMS = trimethylsulfonium), which demonstrates high efficiency and stable yellow light emission with a photoluminescence quantum yield (PLQY) over 25%. The zero-dimensional crystal structure of the compound is comprised of isolated face-sharing photoactive [Cu₂I₅]^3- tetrahedral dimers surrounded by TMS⁺ cations. This promotes strong quantum confinement and electron-phonon coupling, leading to a highly efficient emission from self-trapped excitons. The hybrid structure ensures prolonged stability and nonblue emission compared to unstable blue emission from all-inorganic copper(I) halides. Substitution of Cu with Ag leads to (TMS)AgI₂, which has a one-dimensional chain structure made of edge-sharing tetrahedra, with weak light emission properties. Improved stability and highly efficient yellow emission of (TMS)₃Cu₂I₅ make it a candidate for practical applications. This has been demonstrated through utilization of (TMS)₃Cu₂I₅ in white light-emitting diode with a high Color Rendering Index value of 82 and its use as a new luminescent agent for visualization of in-depth latent fingerprint features. This work illuminates a new direction in designing multifunctional nontoxic hybrid metal halides.

Molecular Sensitization Enabled High Performance Organic Metal Halide Hybrid Scintillator

Scintillators, one of the essential components in medical imaging and security checking devices, rely heavily on rare-earth-containing inorganic materials. Here, a new type of organic-inorganic hybrid scintillators containing earth abundant elements that can be prepared via low-temperature processes is reported. With room temperature co-crystallization of an aggregation-induced emission (AIE) organic halide, 4-(4-(diphenylamino) phenyl)-1-(propyl)-pyrindin-1ium bromide (TPA-PBr), and a metal halide, zinc bromide (ZnBr₂ ), a zero-dimensional (0D) organic metal halide hybrid (TPA-P)₂ ZnBr₄ with a yellowish-green emission peaked at 550 nm has been developed. In this hybrid material, dramatically enhanced X-ray scintillation of TPA-P⁺ is achieved via the sensitization by ZnBr₄ ^2- . The absolute light yield (14,700 ± 800 Photons/MeV) of (TPA-P)₂ ZnBr₄ is found to be higher than that of anthracene (≈13,500 Photons/MeV), a well-known organic scintillator, while its X-ray absorption is comparable to those of inorganic scintillators. With TPA-P⁺ as an emitting center, short photoluminescence and radioluminescence decay lifetimes of 3.56 and 9.96 ns have been achieved. Taking the advantages of high X-ray absorption of metal halides and efficient radioluminescence with short decay lifetimes of organic cations, the material design paves a new pathway to address the issues of low X-ray absorption of organic scintillators and long decay lifetimes of inorganic scintillators simultaneously.

Over 2 A cm-2 CO2 -to-Ethanol Conversion by Alkali-Metal Cation Induced Copper With Dominant (200) Facets

The high-rate ethanol electrosynthesis from CO₂ is challenging due to the low selectivity and poor activity, which requires the competition with other reduction products and H₂ . Here, the electrochemical reconstruction of Cs₃ Cu₂ Cl₅ perovskite to form surface Cl-bonded, low-coordinated Cs modified Cu(200) nanocubes (CuClCs), is demonstrated. Density functional theory calculations reveal that the CuClCs structure possesses low Bader charges and a large coordination capacity; and thus, can promote the CO₂ -to-ethanol pathway via stabilizing C-O bond in oxygenate intermediates. The CuClCs catalyst exhibits outstanding partial current densities for producing ethanol (up to 2124 ± 54 mA cm^-2 ) as one of the highest reported values in the electrochemical CO₂ or CO reduction. This work suggests an attractive strategy with surface alkali-metal cations for ampere-level CO₂ -to-ethanol electrosynthesis.

Improving X-ray Scintillating Merits of Zero-Dimensional Organic-Manganese(II) Halide Hybrids via Enhancing the Ligand Polarizability for High-Resolution Imaging

Luminescent metal halides have been exploited as a new class of X-ray scintillators for security checks, nondestructive inspection, and medical imaging. However, the charge traps and hydrolysis vulnerability are always detrimental to the three-dimensional ionic structural scintillators. Here, the two zero-dimensional organic-manganese(II) halide coordination complexes 1-Cl and 2-Br were synthesized for improvements in X-ray scintillation. The introduction of a polarized phosphine oxide can help to increase the stabilities, especially the self-absorption-free merits of these Mn-based hybrids. The X-ray dosage rate detection limits reached up to 3.90 and 0.81 μGyair/s for 1-Cl and 2-Br, respectively, superior to the medical diagnostic standard of 5.50 μGyair/s. The fabricated scintillation films were applied to radioactive imaging with high spatial resolutions of 8.0 and 10.0 lp/mm, respectively, holding promise for use in diagnostic X-ray medical imaging.

Exceptional structural diversity of hybrid halocuprates(I) with methylammonium and formamidinium cations

Hybrid halocuprates(I) are nowadays the subject of intensive studies as promising materials for various optoelectronic applications. This class of materials is characterized by wide structural diversity enabled by a great variety in the size and shape of organic cations. Therefore, the study of composition-structure-property relationships is a key step for the rational design of new halocuprate materials with desired properties. In this paper, we comprehensively studied MABr/CuBr and FABr/CuBr systems (MA⁺ = methylammonium and FA⁺ = formamidinium) and established the existence of five novel phases (namely, MACu₂Br₃, FA₂[Cu₄Br₆], MACuBr₂, FACuBr₂, and FA₃CuBr₄) related to four different structural types and three distinct A⁺ : Cu⁺ stoichiometries (A⁺ = MA⁺/FA⁺). The optical properties of the discovered phases are studied by absorption and low-temperature photoluminescence spectroscopy. Based on a crystal-chemical analysis, we explained a unique structural diversity of the MA- and FA-based bromocuprates, as well as revealed new structure-property relationships.

Solution-Processed Hybrid Europium (II) Iodide Scintillator for Sensitive X-Ray Detection

Lead halide perovskite nanocrystals have recently demonstrated great potential as x-ray scintillators, yet they still suffer toxicity issues, inferior light yield (LY) caused by severe self-absorption. Nontoxic bivalent europium ions (Eu2+) with intrinsically efficient and self-absorption-free d-f transition are a prospective replacement for the toxic Pb2+. Here, we demonstrated solution-processed organic-inorganic hybrid halide BA10EuI12 (BA denotes C4H9NH4+) single crystals for the first time. BA10EuI12 was crystallized in a monoclinic space group of P21/c, with photoactive sites of [EuI6]4- octahedra isolated by BA+ cations, which exhibited high photoluminescence quantum yield of 72.5% and large Stokes shift of 97 nm. These properties enable an appreciable LY value of 79.6% of LYSO (equivalent to ~27,000 photons per MeV) for BA10EuI12. Moreover, BA10EuI12 shows a short excited-state lifetime (151 ns) due to the parity-allowed d-f transition, which boosts the potential of BA10EuI12 for use in real-time dynamic imaging and computer tomography applications. In addition, BA10EuI12 demonstrates a decent linear scintillation response ranging from 9.21 μGyair s-1 to 145 μGyair s-1 and a detection limit as low as 5.83 nGyair s-1. The x-ray imaging measurement was performed using BA10EuI12 polystyrene (PS) composite film as a scintillation screen, which exhibited clear images of objects under x-ray irradiation. The spatial resolution was determined to be 8.95 lp mm-1 at modulation transfer function = 0.2 for BA10EuI12/PS composite scintillation screen. We anticipate that this work will stimulate the exploration of d-f transition lanthanide metal halides for sensitive x-ray scintillators.

Two-Dimensional Cs2 AgInx Bi1- x Cl6 Alloyed Double Perovskite Nanoplatelets for Solution-Processed Light-Emitting Diodes

Lead-free double perovskites have emerged as a promising class of materials with potential to be integrated into a wide range of optical and optoelectronic applications. Herein, the first synthesis of 2D Cs₂ AgIn_x Bi_{1- x} Cl₆ (0 ≤ x ≤ 1) alloyed double perovskite nanoplatelets (NPLs) with well controlled morphology and composition is demonstrated. The obtained NPLs show unique optical properties with the highest photoluminescence quantum yield of 40.1%. Both temperature dependent spectroscopic studies and density functional theory calculation results reveal that the morphological dimension reduction and In-Bi alloying effect together boost the radiative pathway of the self-trapped excitons of the alloyed double perovskite NPLs. Moreover, the NPLs exhibit good stability under ambient conditions and against polar solvents, which is ideal for all solution-processing of the materials in low-cost device manufacturing. The first solution-processed light-emitting diodes is demonstrated using the Cs₂ AgIn_0.9 Bi_0.1 Cl₆ alloyed double perovskite NPLs as the sole emitting component, showing luminance maximum of 58 cd m^-2 and peak current efficiency of 0.013 cd A^-1 . This study sheds light on morphological control and composition-property relationships of double perovskite nanocrystals, paving the way toward ultimate utilizations of lead-free perovskite materials in diverse sets of real-life applications.

Copper Organometallic Iodide Arrays for Efficient X-ray Imaging Scintillators

Lead-free organic metal halide scintillators with low-dimensional electronic structures have demonstrated great potential in X-ray detection and imaging due to their excellent optoelectronic properties. Herein, the zero-dimensional organic copper halide (18-crown-6)₂Na₂(H₂O)₃Cu₄I₆ (CNCI) which exhibits negligible self-absorption and near-unity green-light emission was successfully deployed into X-ray imaging scintillators with outstanding X-ray sensitivity and imaging resolution. In particular, we fabricated a CNCI/polymer composite scintillator with an ultrahigh light yield of ∼109,000 photons/MeV, representing one of the highest values reported so far for scintillation materials. In addition, an ultralow detection limit of 59.4 nGy/s was achieved, which is approximately 92 times lower than the dosage for a standard medical examination. Moreover, the spatial imaging resolution of the CNCI scintillator was further improved by using a silicon template due to the wave-guiding of light through CNCI-filled pores. The pixelated CNCI-silicon array scintillation screen displays an impressive spatial resolution of 24.8 line pairs per millimeter (lp/mm) compared to the resolution of 16.3 lp/mm for CNCI-polymer film screens, representing the highest resolutions reported so far for organometallic-based X-ray imaging screens. This design represents a new approach to fabricating high-performance X-ray imaging scintillators based on organic metal halides for applications in medical radiography and security screening.

Synthesis of Thermally Stable and Highly Luminescent Cs5 Cu3 Cl6 I2 Nanocrystals with Nonlinear Optical Response

Low-dimensional Cu(I)-based metal halide materials are gaining attention due to their low toxicity, high stability and unique luminescence mechanism, which is mediated by self-trapped excitons (STEs). Among them, Cs₅ Cu₃ Cl₆ I₂ , which emits blue light, is a promising candidate for applications as a next-generation blue-emitting material. In this article, an optimized colloidal process to synthesize uniform Cs₅ Cu₃ Cl₆ I₂ nanocrystals (NCs) with a superior quantum yield (QY) is proposed. In addition, precise control of the synthesis parameters, enabling anisotropic growth and emission wavelength shifting is demonstrated. The synthesized Cs₅ Cu₃ Cl₆ I₂ NCs have an excellent photoluminescence (PL) retention rate, even at high temperature, and exhibit high stability over multiple heating-cooling cycles under ambient conditions. Moreover, under 850-nm femtosecond laser irradiation, the NCs exhibit three-photon absorption (3PA)-induced PL, highlighting the possibility of utilizing their nonlinear optical properties. Such thermally stable and highly luminescent Cs₅ Cu₃ Cl₆ I₂ NCs with nonlinear optical properties overcome the limitations of conventional blue-emitting nanomaterials. These findings provide insights into the mechanism of the colloidal synthesis of Cs₅ Cu₃ Cl₆ I₂ NCs and a foundation for further research.

Large-Scale, Uniform-Patterned CsCu2 I3 Films for Flexible Solar-Blind Photodetectors Array with Ultraweak Light Sensing

Cesium copper halide perovskite is one of the promising materials for solar-blind light detection. However, most of the cesium copper halide perovskite-based photodetectors (PDs) are focused on ultraviolet A detection and realized on the rigid substrate in the single device configuration. Here, a flexible solar-blind PDs array (10 × 10 pixels) based on the CsCu₂ I₃ film patterns for ultraweak light sensing and light distribution imaging is reported. Large-scale CsCu₂ I₃ film arrays are synthesized with various shapes and uniform dimensions through a simple vacuum-heating-assisted solution method. Benefiting from excellent air stability and superior resistance to the photodegrading of the CsCu₂ I₃ film, the array device exhibits long-term stable photoswitching behavior for 8 h and ultralow light detection capability to resolve the light intensity of 6.1 nW cm^-2 with a high responsivity of 62 A W^-1 , and the array device can acquire clear images of "G", "X", and "U" showing the input light distribution. Moreover, the flame detection and warning system based on a curved solar-blind PDs array is demonstrated, which can be used for multi-flame monitoring and locating. These results can encourage potential applications of the CsCu₂ I₃ film-based PDs array in the field of optical communication and environment monitoring.

Synthesis of Efficient and Stable Tetrabutylammonium Copper Halides with Dual Emissions for Warm White Light-Emitting Diodes

In order to achieve a high color-rendering index (CRI) and low correlated color temperature (CCT) indoor lighting, single-component phosphors with broad-band dual emission are in high demand for white-light-emitting diodes (WLEDs). However, phosphors with such fluorescent properties are rare at present. Herein, we report a facile solid-state chemical method for the synthesis of single-component phosphor with broad-band emission and a large Stokes shift that can meet the requirements of future white-light sources. These new tetrabutylammonium copper halides phosphors have excellent warm white emission characteristics, and their luminescence peaks are located at 494 and 654 nm. The optimized photoluminescence (PL) quantum yield can reach 93.7 %. The typical CIE coordinate of the as-fabricated WLED is at (0.3620, 0.3731) with a CRI of 89 and low CCT of 4516 K.

Recent Development of Halide Perovskite Materials and Devices for Ionizing Radiation Detection

Ionizing radiation such as X-rays and γ-rays has been extensively studied and used in various fields such as medical imaging, radiographic nondestructive testing, nuclear defense, homeland security, and scientific research. Therefore, the detection of such high-energy radiation with high-sensitivity and low-cost-based materials and devices is highly important and desirable. Halide perovskites have emerged as promising candidates for radiation detection due to the large light absorption coefficient, large resistivity, low leakage current, high mobility, and simplicity in synthesis and processing as compared with commercial silicon (Si) and amorphous selenium (a-Se). In this review, we provide an extensive overview of current progress in terms of materials development and corresponding device architectures for radiation detection. We discuss the properties of a plethora of reported compounds involving organic-inorganic hybrid, all-inorganic, all-organic perovskite and antiperovskite structures, as well as the continuous breakthroughs in device architectures, performance, and environmental stability. We focus on the critical advancements of the field in the past few years and we provide valuable insight for the development of next-generation materials and devices for radiation detection and imaging applications.

Stable Cuprous Hydroxide Nanostructures by Organic Ligand Functionalization

Copper compounds have been extensively investigated for diverse applications. However, studies of cuprous hydroxide (CuOH) have been scarce due to structural metastability. Herein, a facile, wet-chemistry procedure is reported for the preparation of stable CuOH nanostructures via deliberate functionalization with select organic ligands, such as acetylene and mercapto derivatives. The resulting nanostructures are found to exhibit a nanoribbon morphology consisting of small nanocrystals embedded within a largely amorphous nanosheet-like scaffold. The acetylene derivatives are found to anchor onto the CuOH forming CuC linkages, whereas CuS interfacial bonds are formed with the mercapto ligands. Effective electronic coupling occurs at the ligand-core interface in the former, in contrast to mostly non-conjugated interfacial bonds in the latter, as manifested in spectroscopic measurements and confirmed in theoretical studies based on first principles calculations. Notably, the acetylene-capped CuOH nanostructures exhibit markedly enhanced photodynamic activity in the inhibition of bacteria growth, as compared to the mercapto-capped counterparts due to a reduced material bandgap and effective photocatalytic generation of reactive oxygen species. Results from this study demonstrate that deliberate structural engineering with select organic ligands is an effective strategy in the stabilization and functionalization of CuOH nanostructures, a critical first step in exploring their diverse applications.

Phonon-Assisted Upconversion Photoluminescence of a Self-Trapped Exciton in the Rb2CuCl3 Single Crystal

Phonon-assisted upconversion photoluminescence (UCPL) plays an important role in a wide range of fields such as optical refrigeration, sensitive optical thermometry, quantum state control, and upconversion optoelectronics. High photoluminescence quantum yield (PLQY) and strong electron-phonon coupling are two basic prerequisites of efficient UCPL materials. The self-trapped exciton (STE) system with the above-mentioned advantages hints that it may be a good candidate for phonon-assisted UCPL. Here, we synthesized Rb₂CuCl₃ single crystals (SCs) which yield a high PLQY of the STE emission at 400 nm, and an efficient phonon-assisted UCPL was demonstrated at room temperature. By exponentially fitting the intensity of temperature-dependent UCPL spectra, we obtained an optical thermometry sensitivity of SCs up to 6 mK at 295 K. We also propose that net cooling would be possible if the PLQY is improved up to 91.5% with 345 nm excitation. Our results open a new door to explore laser cooling in STE systems.

Light Emission of Self-Trapped Excitons in Inorganic Metal Halides for Optoelectronic Applications

Self-trapped excitons (STEs) have recently attracted tremendous interest due to their broadband emission, high photoluminescence quantum yield, and self-absorption-free properties, which enable a large range of optoelectronic applications such as lighting, displays, radiation detection, and special sensors. Unlike free excitons, the formation of STEs requires strong coupling between excited state excitons and the soft lattice in low electronic dimensional materials. The chemical and structural diversity of metal halides provides an ideal platform for developing efficient STE emission materials. Herein, an overview of recent progress on STE emission materials for optoelectronic applications is presented. The relationships between the fundamental emission mechanisms, chemical compositions, and device performances are systematically reviewed. On this basis, currently existing challenges and possible development opportunities in this field are presented.

Halide Perovskite: A Promising Candidate for Next-Generation X-Ray Detectors

In the past decade, metal halide perovskite (HP) has become a superstar semiconductor material due to its great application potential in the photovoltaic and photoelectric fields. In fact, HP initially attracted worldwide attention because of its excellent photovoltaic efficiency. However, HP and its derivatives also show great promise in X-ray detection due to their strong X-ray absorption, high bulk resistivity, suitable optical bandgap, and compatibility with integrated circuits. In this review, the basic working principles and modes of both the direct-type and the indirect-type X-ray detectors are first summarized before discussing the applicability of HP for these two types of detection based on the pros and cons of different perovskites. Furthermore, the authors expand their view to different preparation methods developed for HP including single crystals and polycrystalline materials. Upon systematically analyzing their potential for X-ray detection and photoelectronic characteristics on the basis of different structures and dimensions (0D, 2D, and 3D), recent progress of HPs (mainly polycrystalline) applied to flexible X-ray detection are reviewed, and their practicability and feasibility are discussed. Finally, by reviewing the current research on HP-based X-ray detection, the challenges in this field are identified, and the main directions and prospects of future research are suggested.

Copper-based metal halides for X-ray and photodetection

Copper-based metal halides have become important materials in the field of X-ray and photodetection due to their excellent optical properties, good environmental stability and low toxicity. This review presents the progress of research on crystal structure/morphology, photophysics/optical properties and applications of copper-based metal halides. We also discuss the challenges of copper-based metal halides with a perspective of their future research directions.

DFT-1/2 and shell DFT-1/2 methods: electronic structure calculation for semiconductors at LDA complexity

It is known that the Kohn-Sham eigenvalues do not characterize experimental excitation energies directly, and the band gap of a semiconductor is typically underestimated by local density approximation (LDA) of density functional theory (DFT). An embarrassing situation is that one usually uses LDA+Ufor strongly correlated materials with rectified band gaps, but for non-strongly-correlated semiconductors one has to resort to expensive methods like hybrid functionals orGW. In spite of the state-of-the-art meta-generalized gradient approximation functionals like TB-mBJ and SCAN, methods with LDA-level complexity to rectify the semiconductor band gaps are in high demand. DFT-1/2 stands as a feasible approach and has been more widely used in recent years. In this work we give a detailed derivation of the Slater half occupation technique, and review the assumptions made by DFT-1/2 in semiconductor band structure calculations. In particular, the self-energy potential approach is verified through mathematical derivations. The aims, features and principles of shell DFT-1/2 for covalent semiconductors are also accounted for in great detail. Other developments of DFT-1/2 including conduction band correction, DFT+A-1/2, empirical formula for the self-energy potential cutoff radius, etc, are further reviewed. The relations of DFT-1/2 to hybrid functional, sX-LDA,GW, self-interaction correction, scissor's operator as well as DFT+Uare explained. Applications, issues and limitations of DFT-1/2 are comprehensively included in this review.

Zero-Dimensional Hybrid Indium Halides with Efficient and Tunable White-Light Emissions

Two-dimensional hybrid lead perovskites have attracted a great deal of attention in white-light-emitting diodes, but the serious toxicity of Pb²⁺ and the limited photoluminescence quantum yield (PLQY) still restrict further optoelectronic application. To address these issues, a new combining photon strategy was proposed to achieve highly efficient broadband white-light emission in a new family of zero-dimensional (0D) indium halides based on an [InCl₆]^3- octahedron. Remarkably, these 0D halides display dual-band white-light emission derived from the synergistic work of blue- and yellow-light-emitting bands, which can be ascribed to the radiative recombination of bound excitons in organic cations and self-trapped excitons in inorganic anions, respectively, based on spectroscopy and theoretical studies. In-depth first-principles calculation demonstrates that the increased structural deformability effectively improves the PLQY from 7.01% to 18.56%. As a proof of concept, this work provides a profound understanding for advancing the rational design of novel single-component 0D lead-free halides as high-performance white-light emitters.

Organic-Inorganic Hybrid Cuprous Halide Scintillators for Flexible X-ray Imaging

Recently, organic-inorganic hybrid scintillators have received more and more attention because of their merits of easy preparation, good stability, and nontoxicity. Considering the high cost of traditional inorganic scintillators, here we describe experimental investigations of a low-cost zero-dimensional scintillator comprising organic-inorganic hybrid cuprous halide and its capabilities for sensitive X-ray detection and flexible X-ray imaging. This scintillator is synthesized using a facile antisolvent diffusion method with large scalability (50 g). The crystal structure shows an unreported plane rhombus cuprous halide core, which also demonstrates outstanding photoluminescence with a high quantum yield (99.5%), excellent radioluminescence with an efficient internal light yield (25 000 photon/MeV), and sensitive X-ray response with a low detection limit (40.4 nGy/s). The organic-inorganic hybrid chemical feature allows the fabrication of a flexible film based on this scintillator for fine-resolution X-ray radiography. These advantages endow our organic-inorganic hybrid scintillator with promising potential in wearable and portable medical devices.

Recent advances in lead-free double perovskites for x-ray and photodetection

Over the last decade, lead halide perovskites have attracted significant research attention in the field of photovoltaics, light-emitting devices, photodetection, ionizing radiation detection, etc, owing to their outstanding optoelectrical properties. However, the commercial applications of lead-based perovskite devices are restricted due to the poor ambient stability and toxicity of lead. The encapsulation of lead-based devices can reduce the possible leakage of lead. However, it is hard to ensure safety during large-scale production and long-term storage. Recently, considerable efforts have been made to design lead-free perovskites for different optoelectronic applications. Metal halide double perovskites with the general formula of A₂M^IM^IIIX₆or A₂M^IVX₆could be potentially considered as green and stable alternatives for different optoelectronic applications. In this review article, we focus on the recent progress and findings on lead-free halide double perovskites for x-ray and UV-vis photodetection applications. Lead-free halide double perovskite has recently drawn a great deal of attention for superior x-ray detection due to its high absorption coefficient, large carrier mobility-lifetime product, and large bulk resistance. In addition, these materials exhibit good performance in photodetection in the UV-vis region due to high photocarrier generation and efficient carrier separation. In this review, first, we define the characteristics of lead-free double perovskite materials. The fundamental characteristics and beneficial properties of halide perovskites for direct and indirect x-ray detection are then discussed. We comprehensively review recent developments and efforts on lead-free double perovskite for x-ray detection and UV-vis photodetection. We bring out the current challenges and opportunities in the field and finally present the future outlook for developing lead-free double perovskite-based x-ray and UV-vis photodetectors for practical applications.

Lead-Free Zero-Dimensional Organic-Copper(I) Halides as Stable and Sensitive X-ray Scintillators

Low-dimensional organic-metal halides are regarded as an emerging class of X-ray scintillation materials, but most of the discovered compounds are confronted with challenges of toxicity and instability. To address these challenges, we herein report two lead-free zero-dimensional (0D) hybrid halides, (Bmpip)₂Cu₂Br₄ and PPh₄CuBr₂ single crystals, grown by the low-cost solution-processing method. By single-crystal X-ray diffraction refinement, the crystal structures of (Bmpip)₂Cu₂Br₄ and PPh₄CuBr₂ were determined to be orthorhombic and monoclinic crystal systems, respectively. (Bmpip)₂Cu₂Br₄ and PPh₄CuBr₂ show broadband orange and yellow emissions peaking at 620 and 538 nm, respectively. Different from the emission nature of the recent reported Cu-based halide hybrids, both (Bmpip)₂Cu₂Br₄ and PPh₄CuBr₂ emit from excitons bound to defects featuring spin-allowed transition, enabling them to possess fast scintillation decay time of tens of nanoseconds, respectively. In particular, the (Bmpip)₂Cu₂Br₄ single crystal has a high photoluminescence quantum yield of 48.2%, a high scintillation yield of 16,000 photons/MeV, and a low detection limit of 710 nGy_air/s. Due to the combination of nontoxicity, long-term stability, and decent detection performance, (Bmpip)₂Cu₂Br₄ could be regarded as a promising X-ray scintillator.

Compositional Engineering of Doped Zero-dimensional Zinc Halide Blue Emitters for Efficient X-ray Scintillation

Recently, the doped ternary zinc halides with high photoluminescence quantum yields (PLQYs) have demonstrated great potential in light emitting applications. However, the composition-dependent photophysical properties of ternary zinc halides have...

Highly efficient copper halide scintillators for high-performance and dynamic X-ray imaging

Progress towards high performance X-ray detection and dynamic imaging applications, including nondestructive inspection, homeland security, and medical diagnostics, requires scintillators with a high light yield, a reasonable decay time, low cost, and eco-friendliness. Recently, copper halide scintillators have drawn tremendous attention due to their outstanding radioluminescence performance. Here, we first employed β-Cs₃Cu₂Cl₅ as a high-performance scintillator, with a photoluminescence quantum yield (PLQY) of 94.6%, a radioluminescence light yield of 34 000 ± 4000 photons per MeV, a low detection limit of 81.7 nGy_air s^-1, and good operational stability under a total X-ray dose of 174.6 Gy_air in air. In addition, this scintillator presents a high spatial resolution of 9.6 lp mm^-1 at the modulation transfer function of 0.2 and a superb performance at 60 frames per second in our X-ray imaging system. Overall, this highly efficient scintillator demonstrates outstanding comprehensive performance and shows great potential for broad applications in X-ray detection and dynamic imaging.

Recent Advances in All-Inorganic Zero-Dimensional Metal Halides

All-inorganic zero-dimensional (0D) metal halides are composed of isolated metal halide polyhedrons bridged by monovalent alkali metal ions. The unique structure gives rise to molecule-like electronic configuration and consequently highly attractive optical properties. In comparison with their three-dimensional (3D) counterparts, the 0D metal halides exhibit characteristic features such as broadband emission and long-term stability. In addition, 0D metal halides can be constructed from a diverse range of metal ions and permit high-level impurity doping, thereby offering great structural designability and spectral tunability. This Review surveys recent advances in 0D metal halides, including crystal preparation, luminescence modulation, and emerging applications.

Self-trapped exciton emission in inorganic copper(I) metal halides

The broad emission and high photoluminescence quantum yield of self-trapped exciton (STE) radiative recombination emitters make them an ideal solution for single-substrate, white, solid-state lighting sources. Unlike impurities and defects in semiconductors, the formation of STEs requires a lattice distortion, along with strong electron-phonon coupling, in low electron-dimensional materials. The photoluminescence of inorganic copper(I) metal halides with low electron-dimensionality has been found to be the result of STEs. These materials were of significant interest because of their lead-free, all-inorganic structures, and high luminous efficiencies. In this paper, we summarize the luminescence characteristics of zero- and one-dimensional inorganic copper(I) metal halides with STEs to provide an overview of future research opportunities.

Reproducible X-ray Imaging with a Perovskite Nanocrystal Scintillator Embedded in a Transparent Amorphous Network Structure

Metal halide perovskites are emerging scintillator materials in X-ray detection and imaging. However, the vulnerable structure of perovskites triggers unreliable performance when they are utilized in X-ray detectors under cumulative dose irradiation. Herein, a self-limited growth strategy is proposed to construct CsPbBr₃ nanocrystals that are embedded in a transparent amorphous network structure, featuring X-imaging with excellent resolution (≈16.8 lp mm^-1 ), and fast decay time (τ = 27 ns). Interestingly, it is found that the performance degradation of the scintillator, caused by the damage from high-dose X-ray irradiation, can be fully recovered after a facile thermal treatment process. This indicates a superior recycling behavior of the explored perovskites scintillator for practical applications. The recoverability of the as-explored scintillator is attributed to the low atom-migration rate in the amorphous network with high-viscosity (1 × 10¹⁴  cP). This result highlights the practical settlement of the promising perovskites for long-term, cost-effective scintillator devices.

Highly Luminescent Zero-Dimensional Organic Copper Halides for X-ray Scintillation

The present work reports highly efficient flexible and reabsorption-free scintillators based on two zero-dimensional (0D) organic copper halides (TBA)CuX₂ (TBA = tetrabutylammonium cation; X = Cl, Br). The (TBA)CuX₂ exhibit highly luminescent green and sky-blue emissions peaked at 510 and 498 nm, with large Stokes shifts of 224 and 209 nm and high photoluminescence quantum yields (PLQYs) of 92.8% and 80.5% at room temperature for (TBA)CuCl₂ and (TBA)CuBr₂ single crystals (SCs), respectively. Interestingly, above room temperature, their PLQYs increase with temperature and reach near unity at 320 and 345 K for (TBA)CuCl₂ and (TBA)CuBr₂, respectively. The excellent properties originate from self-trapped excitons (STEs) in individual [CuX₂]^- quantum rods, which is demonstrated by the temperature-dependent PL, ultrafast transient absorption (TA) combined with density functional theory (DFT) calculations. The (TBA)CuX₂ scintillators show bright radioluminescence (RL), impressive linear response to dose rate in a broad range, and high light yields. Their potential application in X-ray imaging is demonstrated by using (TBA)CuX₂ composite scintillation screens. Importantly, flexible scintillators are demonstrated to be superior than flat ones for imaging nonplanar objects by conformally coating, which produce accurate images with negligible distortion.

Water-Stable Zero-Dimensional (C4H9)4NCuCl2 Single Crystal with Highly Efficient Broadband Green Emission

Here, we report (C₄H₉)₄NCuCl₂ single crystals with a luminous intensity that remains largely the same after soaking in water for 24 h. (CH₉)₄NCuCl₂ has a new type zero-dimensional framework, in which the isolated [CuCl₂]^- anions are wrapped by organic (C₄H₉)₄N⁺ cations. As expected, (C₄H₉)₄NCuCl₂ shows a broad emission band at 508 nm with a photoluminescence quantum yield of approximately 82% at room temperature, stemming from self-trapped exciton (STE) emission. Temperature-dependent photoluminescence measurement reveals that there is an energy barrier ΔE (24.0 meV) between the intrinsic state and STE state, which leads to the increase in emission intensity with an increase in temperature (98-278 K), while the emission intensity begins to decrease when the temperature is higher than 278 K due to the effects of both thermal quenching and carrier scattering. Our findings provide a new idea for the design of lead-free anti-water stability metal halide materials.

Mn2+ induced significant improvement and robust stability of radioluminescence in Cs3Cu2I5 for high-performance nuclear battery

Fluorescent type nuclear battery consisting of scintillator and photovoltaic device enables semipermanent power source for devices working under harsh circumstances without instant energy supply. In spite of the progress of device structure design, the development of scintillators is far behind. Here, a Cs₃Cu₂I₅: Mn scintillator showing a high light yield of ~67000 ph MeV⁻¹ at 564 nm is presented. Doping and intrinsic features endow Cs₃Cu₂I₅: Mn with robust thermal stability and irradiation hardness that 71% or >95% of the initial radioluminescence intensity can be maintained in an ultra-broad temperature range of 77 K-433 K or after a total irradiation dose of 2590 Gy, respectively. These superiorities allow the fabrication of efficient and stable nuclear batteries, which show an output improvement of 237% respect to the photovoltaic device without scintillator. Luminescence mechanisms including self-trapped exciton, energy transfer, and impact excitation are proposed for the anomalous dramatic radioluminescence improvement. This work will open a window for the fields of nuclear battery and radiography.

Fluorescent-type nuclear batteries are a promising semi-permanent power source, but performance is hindered by scintillator development. Here the authors report a scintillator with high light yield and stability, which leads to improved performance.

(NH4)2AgX3 (X = Br, I): 1D Silver Halides with Broadband White Light Emission and Improved Stability

Recently, ternary copper(I) halides have emerged as alternatives to lead halide perovskites for light emission applications. Despite their high-efficiency photoluminescence (PL) properties, most copper(I) halides are blue emitters with unusually poor tunability of their PL properties. Here, we report the impact of substitution of copper with silver in the high-efficiency blue-emitting Cu(I) halides through hydrothermal synthesis and characterization of (NH₄)₂AgX₃ (X = Br, I). (NH₄)₂AgX₃ are found to exhibit contrasting light emission properties compared to the blue-emitting Cu(I) analogues. Thus, (NH₄)₂AgBr₃ and (NH₄)₂AgI₃ exhibit broadband whitish light emission at room temperature with PL maxima at 394 and 534 nm and full width at half-maximum values of 142 and 114 nm, respectively. Based on our combined experimental and computational results, the broadband emission in (NH₄)₂AgX₃ is attributed to the presence of high-stability self-trapped excitons and defect-bound excitons. (NH₄)₂AgBr₃ and (NH₄)₂AgI₃ both have significantly improved air and moisture stability as compared to the related copper(I) halides, which are prone to degradation via oxidation. Our results suggest that silver halides should be considered alongside their copper analogues for high-efficiency light emission applications.

Scintillation in (C6H5CH2NH3)2SnBr4: green-emitting lead-free perovskite halide materials

We report the optical and scintillation properties of (C₆H₅CH₂NH₃)₂SnBr₄ with excellent absorption length at 20 keV of 0.016 cm, measured bandgap of 2.51 eV, and photoluminescence lifetime of 1.05 μs. The light yield obtained with the ²⁴¹Am source is 3600 ± 600 photons per MeV, which is much smaller than the maximum attainable light yield obtained from the bandgap. Temperature dependent radioluminescence measurements confirm the presence of thermal quenching at room temperature with the activation energy and the ratio between the attempt and the radiative transition rates of 61 meV and 129, respectively. Although thermal quenching affects light yield at room temperature, this green light-emitting perovskite opens an avenue for new lead-free scintillating materials.

A new tin perovskite material with green emission is investigated as a new scintillator for imaging readout. Temperature dependent measurements were studied to understand the mechanism and to improve the future lead-free scintillator.

All-Inorganic Lead-Free Perovskite(-Like) Single Crystals: Synthesis, Properties, and Applications

Due to their nontoxicity, stability, and unique optoelectronic properties, all-inorganic lead-free halide semiconductors with perovskite and perovskite-like structures have successfully emerged as promising optoelectronic materials for various applications, such as solar cells, light-emitting diodes (LEDs), photodetectors, and X-ray detectors. To further explore their practical potentials, researchers have paid more attention in all-inorganic lead-free perovskite (-like) (ILFP) single crystals. For these single crystals, the advantages of large sizes, uniform surface morphology, and few defects can facilitate their excellent performances and practical applications. Besides, compared with the low dimensional and polycrystalline ILFP materials, the ILFP single crystals feature enhanced performances, including a longer carrier diffusion length and a larger light absorption coefficient, which attract a great deal of attention. Therefore, focus is on the researching progress of ILFP single crystals and the development of their preparation methods, as well as the novel properties of ILFP single crystals. In addition, the reported applications of ILFP single crystals are proposed to highlight their practical importance. With the perspective of the evolution and challenges, the current limitations of the materials and devices are discussed, followed by an inspirational outlook on their future development directions.

Non-Hygroscopic, Self-Absorption Free, and Efficient 1D CsCu2I3 Perovskite Single Crystal for Radiation Detection

A novel all-inorganic CsCu₂I₃ single-crystalline perovskite as a nonhygroscopic and efficient X-ray and γ-ray scintillator is described herein. It is featured by a one-dimensional (1D) perovskite structure with an orthorhombic system and a space group of Cmcm. The CsCu₂I₃ crystal emits yellow light peaking at 570 nm originated from strongly localized 1D exciton emission. It appears self-absorption free because of the large Stokes shift of 1.54 eV. The photophysics process of the self-trapped exciton was studied using temperature dependent photoluminescene spectra and decay kinetics measurements. The CsCu₂I₃ crystal exhibits an extremely low afterglow level of 0.008% at 10 ms under X-ray excitation. Under ¹³⁷Cs γ-ray irradiation, its light yield is 16 000 photons/MeV with an energy resolution of 7.8% at 662 keV.

Oriented-Structured CsCu2I3 Film by Close-Space Sublimation and Nanoscale Seed Screening for High-Resolution X-ray Imaging

An all-inorganic lead-free halides Cs-Cu-I system, represented by Cs₃Cu₂I₅ and CsCu₂I₃, has attracted attention for their good photophysical characteristics recently. Successive works had reported their application potential in light-emitting devices. However, there is no report for CsCu₂I₃ in X-ray scintillation detectors so far. We notice that CsCu₂I₃ may be advantageous in such an application due to the one-dimensional crystal structure, the congruent-melting feature, and the high spectral matching to some photosensors. In this work, we explore the scintillation properties and imaging application of CsCu₂I₃ in X-ray scintillator detector. The oriented structure is designed to enhance the imaging performance of a CsCu₂I₃ detector. Close-space sublimation process and nanoscale seed screening strategy are employed to realize this design by producing a large-area (25 cm²) CsCu₂I₃ thick film layer with the oriented nanorod structure. This CsCu₂I₃ detector eventually achieves a high spatial resolution of 7.5 lp mm^-1 in X-ray imaging.

Zero-Dimensional Hybrid Organic-Inorganic Indium Bromide with Blue Emission

Low-dimensional hybrid organic-inorganic metal halides have received increased attention because of their outstanding optical and electronic properties. However, the most studied hybrid compounds contain lead and have long-term stability issues, which must be addressed for their use in practical applications. Here, we report a new zero-dimensional hybrid organic-inorganic halide, RInBr₄, featuring photoemissive trimethyl(4-stilbenyl)methylammonium (R⁺) cations and nonemissive InBr₄^- tetrahedral anions. The crystal structure of RInBr₄ is composed of alternating layers of inorganic anions and organic cations along the crystallographic a axis. The resultant hybrid demonstrates bright-blue emission with Commission Internationale de l'Eclairage color coordinates of (0.19, 0.20) and a high photoluminescence quantum yield (PLQY) of 16.36% at room temperature, a 2-fold increase compared to the PLQY of 8.15% measured for the precursor organic salt RBr. On the basis of our optical spectroscopy and computational work, the organic component is responsible for the observed blue emission of the hybrid material. In addition to the enhanced light emission efficiency, the novel hybrid indium bromide demonstrates significantly improved environmental stability. These findings may pave the way for the consideration of hybrid organic In(III) halides for light emission applications.

Color Tunable Self-Trapped Emissions from Lead-Free All Inorganic IA-IB Bimetallic Halides Cs-Ag-X (X = Cl, Br, I)

Multi-metallic halides of group IA and IB metals are emerged as a new class of color tunable emitters. While chalcogenides and perovskites are extensively studied, these families of materials are little explored. In comparison, herein, lead and cadmium free bimetallic Cs-Ag-X (X = Cl, Br, I) halides are reported where the larger ion Ag⁺ helped in incorporating all the halide ions which in turn tune their emission color in spanning from 397 nm (violet) to 820 nm (near infrared) as a function of their composition. The synthesis method adopted here is the solvent free ball milling of respective halides of Cs and Ag and took the record shortest time and in bulk scale. From decay lifetimes, emissions from these bimetallic halides are found as a result of fast recombination of self-trapped excitons, which exhibited not only reasonably high quantum yield in the range of 17-68% but also excellent stability to air and moisture under ambient conditions. These also show wide Stokes shift with relatively longer decay lifetimes ranging above the exciton and below the surface trap or dopant induced emissions of inorganic semiconductors, indicating a new class of materials having unique identity of their optical behaviors.