Computational Characterization of Defects in Metal-Organic Frameworks: Spontaneous and Water-Induced Point Defects in ZIF-8

Photocatalytic remediation of organic pollutants in contaminated water using trimetallic zeolitic imidazole framework: From methylene blue to wastewater

Photocatalysts have recently attracted significant attention for their ability to efficiently degrade organic contaminants in wastewater under sunlight irradiation conditions. In this study, trimetallic Zn-ZIF photocatalyst is synthesized by incorporating Ni- and Cd-dopant atoms to enhance photocatalytic performance. Morphological and crystallographic analyses confirm the formation of the ZIF-L structure. Compared to monometallic and bimetallic variants, the trimetallic ZIF exhibits enhanced optical absorbance. PL analysis indicates that additional impurities introduce more active sites, resulting in improved photocatalytic performance. Trimetallic N2C4 ZIF photocatalyst shows the highest organic degradability with 95.1 % MB degradation, with stable second-order kinetics derived primarily from superoxide radicals. The catalyst also effectively degrades melanoidin chromophore in coffee and wastewater. This work demonstrates a promising approach to developing broadly applicable ZIF photocatalysts to photodegrade various polluted environmental systems.

Sandwiching of MOF nanoparticles between graphene oxide nanosheets among ice grains

Current strategies to tailor the formation of nanoparticle clusters require specificity and directionality built into the surface functionalization of the nanoparticles by involved chemistries that can alter their properties. Here, we describe a non-disruptive approach to place nanomaterials of different shapes between nanosheets, i.e., nano-sandwiches, absent any pre-modification of the components. We demonstrate this with metal-organic frameworks (MOFs) and silicon oxide (SiO2) nanoparticles sandwiched between graphene oxide (GO) nanosheets, MOF-GO and SiO2-GO, respectively. For the MOF-GO, the MOF shows significantly enhanced conductivity and retains its original crystallinity, even after one-year exposure to aqueous acid/base solutions, where the GO effectively encapsulates the MOF, shielding it from polar molecules and ions. The MOF-GOs are shown to effectively capture CO2 from a high-humidity flue gas while fully maintaining their crystallinities and porosities. Similar behavior is found for other MOFs, including water-sensitive HKUST-1 and MOF-5, promoting the use of MOFs in practical applications. The nanoparticle sandwich strategy provides opportunities for materials science in the design of nanoparticle clusters consisting of different materials and shapes with predetermined spatial arrangements.

Harnessing Pore Size in COF Membranes: A Concentration Gradient-Driven Molecular Dynamics Study on Enhanced H2/CH4 Separation

This work presents a novel approach for accurately predicting the gas transport properties of covalent organic framework (COF) membranes using a nonequilibrium molecular dynamics (NEMD) methodology called concentration gradient-driven molecular dynamics (CGD-MD). We first simulated the flux of hydrogen (H2) and methane (CH4) across two distinct COF membranes, COF-300 and COF-320, for which experimental data are available in the literature. Our CGD-MD simulation results aligned closely with the experimentally measured gas permeability and selectivity of these COF membranes. Leveraging the same methodology, we discovered promising COF candidates for H2/CH4 separation, including NPN-1, NPN-2, NPN-3, TPE-COF-I, COF-303, DMTA-TPB2, 3D-Por-COF, COF-921, COF-IM AA, TfpBDH, and PCOF-2. We then compared our findings with simulations utilizing the well-known approach that merges grand canonical Monte Carlo (GCMC) and equilibrium molecular dynamics (EMD) to predict gas adsorption and diffusion parameters in COFs. Our results showed that when the pore sizes of COF membranes are below 10 Å, the choice of the method plays a significant role in determining the performance of the membranes. The GCMC+EMD approach suggested that COFs tend to exhibit CH4 selectivity when their pore limiting diameters are below 10 Å, whereas the CGD-MD results reveal a preference for H2. Density functional theory calculations indicate that H2 has a lower affinity for three promising COFs, NPN-1, NPN-2, and NPN-3, compared to CH4, which results in H2 remaining unbound, while CH4 occupies all of the adsorption sites, thereby facilitating the selective recovery of H2 at the end of the separation process. We proposed a relationship between adsorption time and diffusion time, highlighting the critical role of selecting an appropriate simulation method. This relationship underscores how adsorption and diffusion processes interplay, impacting material performance. Overall, these insights not only improve the accuracy of predictive models but also guide the development of more efficient COF-based membrane applications for future research and industrial applications.

The Nature of Structural Defects in ZIF-8 Revealed with 1H and 31P MAS NMR and X-Ray Absorption Spectroscopy

The metal-organic frameworks (MOFs) attract interest as potential catalysts whose catalytic properties are driven by defects. Several methods have been proposed for the defects-inducing synthesis of MOFs. However, the active species formed on the defective sites remain elusive and uncharacterized, as the spectroscopic fingerprints of these species are hidden by the regular structure signals. In this work, we have performed the synthesis of ZIF-8 MOF with defect-inducing procedures using fully deuterated 2-methylimidazolate ligands to enhance the defective sites' visibility. By combining 1H and 31P MAS NMR spectroscopy and X-ray absorption spectroscopy, we have found evidence for the presence of different structural hydroxyl Zn-OH groups in the ZIF-8 materials. It is demonstrated that the ZIF-8 defect sites are represented by Zn-OH hydroxyl groups with the signals at 0.3 and -0.7 ppm in the 1H MAS NMR spectrum. These species are of basic nature and may be responsible for the catalytic activity of the ZIF-8 material.

Defect-Driven Evolution of Oxo-Coordinated Cobalt Active Sites with Rapid Structural Transformation for Efficient Water Oxidation

Reconstructing the surface nature of metal-organic frameworks (MOFs) as precatalytic structures is a promising methodology for improving electrocatalytic performance. However, regulating the structural evolution of MOFs during electrolysis remains highly uncontrollable and lacks an in-depth understanding of the role of in situ-derived active sites. Here, we suggest a simple approach to fine-tune the symmetry of Co-MOFs with an oxo-coordinated asymmetric coordination that acts as a prototypical structure motif for the oxygen evolution reaction (OER). Through a facile thermal treatment, the Co-N4 configuration of Co-MOFs transforms to the distorted Co-N3-oxo configuration of defective Co-ligand nanoclusters. By operando spectroscopic characterization, the reconstructed Co-N3-oxo structure enables a rapid structural transition toward homogeneous oxyhydroxides. Moreover, the defective nature of the precatalytic structure regulates the surface Co-O bonding environment with abundant μ2-O-Co3+ sites, thereby exhibiting highly enhanced OER activity with an overpotential of 256 mV at 10 mA cm-2 and excellent durability for 100 h, compared with the pristine Co-MOFs. Atomistic simulations reveal that the effect of OER intermediates on the oxyhydroxides gets distributed among neighboring Co ions, promoting balanced binding of the intermediates. This work highlights an effective strategy to design the MOF-based structure for optimizing the surface nature, thus enhancing the electrocatalytic activity.

Directional Construction of Low-Coordination Fe-N3 Coupled with Intrinsic Carbon Defects for High-Efficiency Oxygen Reduction

Regulating the coordination environment of Fe-Nx sites is an efficient but challenging approach for promoting the intrinsic catalytic activity of single-atom Fe/N-codoped carbon (Fe-N-C) toward the oxygen reduction reaction (ORR). Herein, low-coordination Fe-N3 sites coupled with carbon vacancies (Fe-N3/CV) are directionally constructed in Fe-N-C via pyrolysis of a metal-organic framework (MOF) precursor with N3-Zn-O-Fe moieties, which are delicately prefabricated by chemically anchoring Fe3+ onto a H2O-etching induced linker-missing Zn-N3 site in the MOF precursor. The optimized Fe-N-C with the Fe-N3/CV sites displays a high ORR half-wave potential of 0.92 V (vs RHE), which is attributed to the optimized electronic structure and binding strengths of the active Fe center toward the ORR intermediates stemming from the synergy of the asymmetric configuration of Fe-N3 as well as the adjacent carbon vacancies. This work could be enlightening for the design and construction of high-activity coupling sites in metal and nitrogen-codoped carbon catalysts.

ZIF-8 Used for the Selective Recovery of Heavy Rare Earth Elements from Mining Wastewater

In this study, a sample of 2-methylimidazole zinc salt (ZIF-8) demonstrated high selectivity for the recovery of heavy rare earth elements (REEs) from real rare earth mining wastewater. Results show that the distribution coefficient values of Y3+ (4.02 × 104 mL·g-1), Gd3+ (7.8 × 104 mL·g-1), and Dy3+ (6.8 × 104 mL·g-1) are orders of magnitude higher than those of K+ (359.51 mL·g-1), Mn2+ (266.67 mL·g-1), Ca2+ (396.42 mL·g-1), and Mg2+ (239.48 mL·g-1). Moreover, the desorption efficiency of heavy REEs exceeded 40%. Advanced characterizations and density functional theory (DFT) calculations were utilized to elucidate that the heavy REEs were more likely to bind to the nitrogen atoms of imidazole groups on ZIF-8 compared to non-REEs. Furthermore, the adsorption and desorption of heavy REEs primarily depend on the chemical interaction confirmed by adsorption kinetics, isotherm model, and thermodynamic analysis, which involves the dissociation of water and the formation of REE-O bonds. Finally, the ZIF-8 exhibits a remarkable recovery efficiency of over 40% for heavy REEs in column tests conducted over 7h. The findings reported here provide new insights into the selective recovery of heavy REEs from real mining wastewater.

ZIF-8 Vibrational Spectra: Peak Assignments and Defect Signals

Zeolitic imidazolate framework (ZIF-8) is a promising material for gas separation applications. It also serves as a prototype for numerous ZIFs, including amorphous ones, with a broader range of possible applications, including sensors, catalysis, and lithography. It consists of zinc coordinated with 2-methylimidazolate (2mIm) and has been synthesized with methods ranging from liquid-phase to solvent-free synthesis, which aim to control its crystal size and shape, film thickness and microstructure, and incorporation into nanocomposites. Depending on the synthesis method and postsynthesis treatments, ZIF-8 materials may deviate from the nominal defect-free ZIF-8 crystal structure due to defects like missing 2mIm, missing zinc, and physically adsorbed 2mIm trapped in the ZIF-8 pores, which may alter its performance and stability. Infrared (IR) spectroscopy has been used to assess the presence of defects in ZIF-8 and related materials. However, conflicting interpretations by various authors persist in the literature. Here, we systematically investigate ZIF-8 vibrational spectra by combining experimental IR spectroscopy and first-principles molecular dynamics simulations, focusing on assigning peaks and elucidating the spectroscopic signals of putative defects present in the ZIF-8 material. We attempt to resolve conflicting assignments from the literature and to provide a comprehensive understanding of the vibrational spectra of ZIF-8 and its defect-induced variations, aiming toward more precise quality control and design of ZIF-8-based materials for emerging applications.

The Surface of Colloidal Metal-Organic Framework Nanoparticles Revealed by Vibrational Sum Frequency Scattering Spectroscopy

Solvation shells strongly influence the interfacial chemistry of colloidal systems, from the activity of proteins to the colloidal stability and catalysis of nanoparticles. Despite their fundamental and practical importance, solvation shells have remained largely undetected by spectroscopy. Furthermore, their ability to assemble at complex but realistic interfaces with heterogeneous and rough surfaces remains an open question. Here, we apply vibrational sum frequency scattering spectroscopy (VSFSS), an interface-specific technique, to colloidal nanocrystals with porous metal-organic frameworks (MOFs) as a case study. Due to the porous nature of the solvent-particle boundary, MOF particles challenge conventional models of colloidal and interfacial chemistry. Their multiweek colloidal stability in the absence of conventional surface ligands suggests that stability may arise in part from solvation forces. Spectra of colloidally stable Zn(2-methylimidazolate)2 (ZIF-8) in polar solvents indicate the presence of ordered solvation shells, solvent-metal binding, and spontaneous ordering of organic bridging linkers within the MOF. These findings help explain the unexpected colloidal stability of MOF colloids, while providing a roadmap for applying VSFSS to wide-ranging colloidal nanocrystals in general.

Hierarchically Micro- and Mesoporous Zeolitic Imidazolate Frameworks Through Selective Ligand Removal

A new method to engineer hierarchically porous zeolitic imidazolate frameworks (ZIFs) through selective ligand removal (SeLiRe) is presented. This innovative approach involves crafting mixed-ligand ZIFs (ML-ZIFs) with varying proportions of 2-aminobenzimidazole (NH2-bIm) and 2-methylimidazole (2-mIm), followed by controlled thermal treatments. This process creates a dual-pore system, incorporating both micropores and additional mesopores, suggesting selective cleavage of metal-ligand coordination bonds. Achieving this delicate balance requires adjustment of heating conditions for each mixed-ligand ratio, enabling the targeted removal of NH2-bIm from a variety of ML-ZIFs while preserving their inherent microporous framework. Furthermore, the distribution of the initial thermolabile ligand plays a pivotal role in determining the resulting mesopore architecture. The efficacy of this methodology is aptly demonstrated through the assessment of hierarchically porous ZIFs for their potential in adsorbing diverse organic dyes in aqueous environments. Particularly striking is the performance of the 10%NH2-ZIF-2 h, which showcases an astonishing 40-fold increase in methylene blue adsorption capacity compared to ZIF-8, attributed to larger pore volumes that accelerate the diffusion of dye molecules to adsorption sites. This versatile technique opens new avenues for designing micro/mesoporous ZIFs, particularly suited for liquid media scenarios necessitating efficient active site access and optimal diffusion kinetics, such as purification, catalysis, and sensing.

Water Promotes Melting of a Metal-Organic Framework

Water is one of the most reactive and abundant molecules on Earth, and it is thus crucial to understand its reactivity with various material families. One of the big unknown questions is how water in liquid and vapor forms impact the fast-emerging class of metal-organic frameworks (MOFs). Here, we discover that high-pressure water vapor drastically modifies the structure and hence the dynamic, thermodynamic, and mechanical properties of MOF glasses. In detail, we find that an archetypical MOF (ZIF-62) is extremely sensitive to heat treatments performed at 460 °C and water vapor pressures up to ∼110 bar. Both the melting and glass transition temperatures decrease remarkably (by >100 °C), and simultaneously, hardness and Young's modulus increase by up to 100% under very mild treatment conditions (<20 bar of hydrothermal pressure). Structural analyses suggest water to partially coordinate to Zn in the form of a hydroxide ion by replacing a bridging imidazolate-based linker. The work provides insight into the role of hot-compressed water in influencing the structure and properties of MOF glasses and opens a new route for systematically changing the thermodynamics and kinetics of MOF liquids and thus altering the thermal and mechanical properties of the resulting MOF glasses.

Probing Structural Defects in MOFs Using Water Stability

Defects in the crystal structures of metal-organic frameworks (MOFs), whether present intrinsically or introduced via so-called defect engineering, can play strong roles in the properties of MOFs for various applications. Unfortunately, direct experimental detection and characterization of defects in MOFs are very challenging. We show that in many cases, the differences between experimentally observed and computationally predicted water stabilities of MOFs can be used to deduce information on the presence of point defects in real materials. Most computational studies of MOFs consider these materials to be defect-free, and in many cases, the resulting structures are predicted to be hydrophobic. Systematic experimental studies, however, have shown that many MOFs are hydrophilic. We show that the existence of chemically plausible point defects can often account for this discrepancy and use this observation in combination with detailed molecular simulations to assess the impact of local defects and flexibility in a variety of MOFs for which defects had not been considered previously.

Copper nanoparticles encapsulated in zeolitic imidazolate framework-8 as a stable and selective CO2 hydrogenation catalyst

Metal-organic frameworks have drawn attention as potential catalysts owing to their unique tunable surface chemistry and accessibility. However, their application in thermal catalysis has been limited because of their instability under harsh temperatures and pressures, such as the hydrogenation of CO2 to methanol. Herein, we use a controlled two-step method to synthesize finely dispersed Cu on a zeolitic imidazolate framework-8 (ZIF-8). This catalyst suffers a series of transformations during the CO2 hydrogenation to methanol, leading to ~14 nm Cu nanoparticles encapsulated on the Zn-based MOF that are highly active (2-fold higher methanol productivity than the commercial Cu-Zn-Al catalyst), very selective (>90%), and remarkably stable for over 150 h. In situ spectroscopy, density functional theory calculations, and kinetic results reveal the preferential adsorption sites, the preferential reaction pathways, and the reverse water gas shift reaction suppression over this catalyst. The developed material is robust, easy to synthesize, and active for CO2 utilization.

Enhanced Iodine Capture Using a Postsynthetically Modified Thione-Silver Zeolitic Imidazole Framework

Efficient management of radionuclides that are released from various processes in the nuclear fuel cycle is of significant importance. Among these nuclides, radioactive iodine (mainly 129I and 131I) is a major concern due to the risk it poses to the environment and to human health; thus, the development of materials that can capture and safely store radioactive iodine is crucial. Herein, a novel silver-thione-functionalized zeolitic imidazole framework (ZIF) was synthesized via postsynthetic modification and assessed for its iodine uptake capabilities alongside the parent ZIF-8 and intermediate materials. A solvent-assisted ligand exchange procedure was used to replace the 2-methylimidazole linkers in ZIF-8 with 2-mercaptoimidazole, forming intermediate compound ZIF-8 = S, which was reacted with AgNO3 to yield the ZIF-8 = S-Ag+ composite for iodine uptake. Despite possessing the lowest BET surface area of the derivatives, the Ag-functionalized material demonstrated superior I2 adsorption in terms of both maximum capacity (550 g I2/mol) and rapid kinetics (50% loading achieved in 5 h, saturation in 50 h) compared to that of our pristine ZIF-8, which reached 450 g I2/mol after 150 h and 50% loading in 25 h. This improvement is attributed to the presence of the Ag+ ions, which provide a strong chemical driving force to form a stable Ag-I species. The results of this study contribute to a broader understanding of the strategies that can be employed to engineer adsorbents with robust iodine uptake behavior.

Bioinspired Cu(II) Defect Sites in ZIF-8 for Selective Methane Oxidation

Activating the C-H bonds of alkanes without further oxidation to more thermodynamically stable products, CO and CO2, is a long-sought goal of catalytic chemistry. Inspired by the monocopper active site of methane monooxygenase, we synthesized a Cu-doped ZIF-8 metal-organic framework with 25% Cu and 75% Zn in the nodes and activated it by heating to 200 °C and dosing in a stepwise fashion with O2, methane, and steam. We found that it does oxidize methane to methanol and formaldehyde. The catalysis persists through at least five cycles, and beyond the third cycle, the selectivity improves to the extent that no CO2 can be detected. Experimental characterization and analysis were carried out by PXRD, DRUV-vis, SEM, and XAS (XANES and EXAFS). The reaction is postulated to proceed at open-coordination copper sites generated by defects, and the mechanism of methanol production was explicated by density functional calculations with the revMO6-L exchange-correlation functional. The calculations reveal a catalytic cycle of oxygen-activated CuI involving the conversion of two molecules of CH4 to two molecules of CH3OH by a sequence of hydrogen atom transfer reactions and rebound steps. For most steps in the cycle, the reaction is more favored by singlet species than by triplets.

Efficient Generation of Large Collections of Metal-Organic Framework Structures Containing Well-Defined Point Defects

High-throughput molecular simulations of metal-organic frameworks (MOFs) are a useful complement to experiments to identify candidates for chemical separation and storage. All previous efforts of this kind have used simulations in which MOFs are approximated as defect-free. We introduce a tool to readily generate missing-linker defects in MOFs and demonstrate this tool with a collection of 507 defective MOFs. We introduce the concept of the maximum possible defect concentration; at higher defect concentrations, deviations from the defect-free crystal structure would be readily evident experimentally. We studied the impact of defects on molecular adsorption as a function of defect concentrations. Defects have a slightly negative or negligible influence on adsorption at low pressures for ethene, ethane, and CO₂ but a strong positive influence for methanol due to hydrogen bonding with defects. Defective structures tend to have loadings slightly higher than those of defect-free structures for all adsorbates at elevated pressures.

Acoustomicrofluidic Defect Engineering and Ligand Exchange in ZIF-8 Metal-Organic Frameworks

A way through which the properties of metal-organic frameworks (MOFs) can be tuned is by engineering defects into the crystal structure. Given its intrinsic stability and rigidity, however, it is difficult to introduce defects into zeolitic imidazolate frameworks (ZIFs)-and ZIF-8, in particular-without compromising crystal integrity. In this work, it is shown that the acoustic radiation pressure as well as the hydrodynamic stresses arising from the oscillatory flow generated by coupling high frequency (MHz-order) hybrid surface and bulk acoustic waves into a suspension of ZIF-8 crystals in a liquid pressure transmitting medium is capable of driving permanent structural changes in their crystal lattice structure. Over time, the enhancement in the diffusive transport of guest molecules into the material's pores as a consequence is shown to lead to expansion of the pore framework, and subsequently, the creation of dangling-linker and missing-linker defects, therefore offering the possibility of tuning the type and extent of defects engineered into the MOF through the acoustic exposure time. Additionally, the practical utility of the technology is demonstrated for one-pot, simultaneous solvent-assisted ligand exchange under ambient conditions, for sub-micron-dimension ZIF-8 crystals and relatively large ligands-more specifically 2-aminobenzimidazole-without compromising the framework porosity or overall crystal structure.

Temperature-Dependent Mechanical Properties of a Metal-Organic Framework: Creep Behavior of a Zeolitic Imidazolate Framework-8 Single Crystal

Zeolite Imidazole Framework-8 (ZIF-8) with a robust structure and high thermal stability is a strong candidate to act as the catalyst matrix for various chemical applications, especially for those at higher temperatures, like hydrogenation. In this study, the time-dependent plasticity of a ZIF-8 single crystal was explored by a dynamic indentation technique to explore its mechanical stability at higher temperatures. The thermal dynamic parameters for the creep behaviors, like activation volume and activation energy, were determined, and possible mechanisms for the creep of ZIF-8 were then discussed. A small activation volume implies the localization of the thermo-activated events, while high activation energy, high stress exponent n, and weak dependence of the creep rate on temperature all favor pore collapse over volumetric diffusion as the creep mechanism.

Structure and thermodynamics of water adsorption in NU-1500-Cr

Metal-organic frameworks (MOFs) are a class of materials with diverse chemical and structural properties, and have been shown to effectively adsorb various types of guest molecules. The mechanism of water adsorption in NU-1500-Cr, a high-performance atmospheric water harvesting MOF, is investigated using a combination of molecular dynamics simulations and infrared spectroscopy. Calculations of thermodynamic and dynamical properties of water as a function of relative humidity allow for following the adsorption process from the initial hydration stage to complete filling of the MOF pores. Initial hydration begins at the water molecules that saturate the open Cr³⁺ sites of the framework, which is then followed by the formation of water chains that extend along the channels connecting the hexagonal pores of the framework. Water present in these channels gradually coalesces and fills the hexagonal pores sequentially after the channels are completely hydrated. The development of hydrogen-bond networks inside the MOF pores as a function of relative humidity is characterized at the molecular level using experimental and computational infrared spectroscopy. A detailed analysis of the OH-stretch vibrational band indicates that the low-frequency tail stems from strongly polarized hydrogen-bonded water molecules, suggesting the presence of some structural disorder in the experimental samples. Strategies for designing efficient water harvesting MOFs are also proposed based on the mechanism of water adsorption in NU-1500-Cr.

ZIF-8 thin films by a vapor-phase process: limits to growth

Metal-organic frameworks are a class of porous materials that show promising properties in the field of microelectronics. To reach industrial use of these materials, gas phase techniques are often preferred and were recently introduced. However, the thicknesses achieved are not sufficient, limiting further development. In this work, an improved gas phase process allowing ZIF-8 layer formation of several hundreds of nm using cyclic ligand/water exposures is described. Then, by a combination of in-depth surface analyses and molecular dynamics simulations, the presence and role of hydroxyl defects in the ZIF-8 layer to reach this thickness are established. At the same time, this study unveils an inherent limit of the method: thickness growth is consubstantial with defect repairing upon the crystallites ripening; such defect repairing eventually leads to the decrease of the pore window below the diffusion radius of the incoming linker, thus apparently capping the maximum MOF thickness observable for this type of material topology through this growth method.

Fabrication of Hierarchical, Porous, Bimetallic, Zeolitic Imidazolate Frameworks with the Incorporation of Square Planar Pd and Its Catalytic Application

Bimetallic zeolitic imidazolate frameworks (ZIFs) containing two different metal ions can exhibit superior performances when applied in heterogeneous catalysis. Herein, we present a facile one-pot synthesis method for PdCo-ZIFs with various Pd/Co ratios, where Pd(II) ions are successfully incorporated into the Co node sites of the ZIF structure. The local structure of the bimetallic ZIFs was comprehensively investigated by pore-structure, X-ray absorption fine structure, and in situ CO adsorption Fourier transform infrared analyses. The results demonstrated that the framework comprises different coordination geometries of Co (tetrahedral) and Pd (square planar) ions connected by the benzimidazolate ligand. Notably, the inherently nonporous, 2D Co-ZIF structure was transformed into a hierarchical porous structure, and the PdCo-ZIFs exhibited a significantly increased concentration of defects and distorted Co sites. Based on these results, the catalytic performances of the synthesized ZIFs in the cycloaddition of CO2 to epoxides were evaluated under a cocatalyst and solvent-free conditions. The PdCo-ZIFs exhibited significantly higher catalytic activity (maximum turnover frequency, TOF = 2501 h-1) than Co-ZIF (TOF = 65 h-1) and Pd-ZIF (no activity), which revealed that the undercoordinated Co sites with distorted structure are the active sites rather than the incorporated Pd ions. This study provides a facile one-pot method for synthesizing bimetallic ZIFs with mixed-coordination modes, hierarchical porous structures, and modified defect concentrations, which would expand the library of structurally diverse bimetallic ZIFs toward various applications.

Functionalized biological metal-organic framework with nanosized coronal structure and hierarchical wrapping pattern for enhanced targeting therapy

Inefficient tumor-targeted delivery and uncontrolled drug release are the major obstacles in cancer chemotherapy. Herein, inspired by the targeting advantage of coronavirus from its size and coronal structure, a coronal biological metal-organic framework nanovehicle (named as corona-BioMOF) is constructed for improving its precise cancer targeting ability. The designed corona-BioMOF is constructed as the carriers-encapsulated carrier model by inner coated with abundant protein-nanocaged doxorubicin particles and external decorated with high-affinity apoferritin proteins to form the spiky surface for constructing the specific coronal structure. The corona-BioMOF shows a higher affinity and an enhanced targeting ability towards receptor-positive cancer cells compared to that of MOF-drug composites without spiky surface. It also exhibits the hierarchical wrapping pattern-endowed controlled lysosome-specific drug release and remarkable tumor lethality in vivo. Moreover, water-induced surface defect-based protein handle mechanism is first proposed to shape the coronal-BioMOF. This work will provide a better inspiration for nanovehicle construction and be broadly useful for clinical precision nanomedicine.

Molecular identification and quantification of defect sites in metal-organic frameworks with NMR probe molecules

The defects in metal-organic frameworks (MOFs) can dramatically alter their pore structure and chemical properties. However, it has been a great challenge to characterize the molecular structure of defects, especially when the defects are distributed irregularly in the lattice. In this work, we applied a characterization strategy based on solid-state nuclear magnetic resonance (NMR) to assess the chemistry of defects. This strategy takes advantage of the coordination-sensitive phosphorus probe molecules, e.g., trimethylphosphine (TMP) and trimethylphosphine oxide (TMPO), that can distinguish the subtle differences in the acidity of defects. A variety of local chemical environments have been identified in defective and ideal MOF lattices. The geometric dimension of defects can also be evaluated by using the homologs of probe molecules with different sizes. In addition, our method provides a reliable way to quantify the density of defect sites, which comes together with the molecular details of local pore environments. The comprehensive solid-state NMR strategy can be of great value for a better understanding of MOF structures and for guiding the design of MOFs with desired catalytic or adsorption properties.

Defects in porous materials can alter the pore structure and chemical properties. Here authors demonstrate an approach for studying defects in metal-organic frameworks using ³¹P NMR and probe molecules.

Kinetic Model of Acid Gas Induced Defect Propagation in Zeolitic Imidazolate Frameworks

Understanding the degradation of nanoporous materials under exposure to common acid gas contaminants (e.g., SO₂, CO₂, NO₂, and H₂S) is essential to elongate their lifetime and thus enable their practical applications in separations and catalysis. Previous theoretical investigations have focused on the formation of isolated point defects, which are insufficient to provide direct insights into the long-term evolution of the bulk properties of materials such as zeolitic imidazolate frameworks (ZIFs) under sustained acid gas exposure. To bridge this divide in both length and time scales, we developed a first-principles lattice-based kinetic model to simulate the defect propagation and bulk material breakdown in ZIFs. This model closely reproduces the experimentally measured macroscopic evolution of the time-dependent bulk materials proprieties and also yields important new insights regarding the autocatalytic nature of ZIF degradation and the spatial distribution of defects. Our results suggest new experimental directions to identify nascent defect clusters in degraded ZIFs and avenues to mitigate degradation under challenging conditions of acid gas exposure.

Defect Engineering in Metal-Organic Framework Nanocrystals: Implications for Mechanical Properties and Performance

The growth process of metal-organic framework (MOF) nanocrystals defines their properties and functions. However, defects may be prevalent during the crystallization of even seemingly perfect MOFs, such as zeolitic imidazolate framework-8 (ZIF-8), and yet direct probing of such structural defects has been challenging because of the lack of nanoscale techniques to locally examine individual nanocrystals. Here, we directly study local defects, such as missing linkers or metal vacancies, in ZIF-8 nano- and microcrystals with near-field IR nanospectroscopy combined with density functional theory calculations. We track the chemical changes during crystallization and show that structural defects like zinc cations that are bound to molecules of the reactant gradually disappear with ripening of the crystals, while dangling and missing linker defects prevail. The resulting defect-terminating groups or open-metal sites produce mechanical anisotropy and reduce the Young's modulus, as measured via tip force microscopy with nanoscale resolution and supported by theoretical modeling. However, these structural defects also open the door for defect engineering to tune the performance of ZIF-8 by offering additional adsorption sites for targeted catalytic reactions, chemical sensing, or gas capture.

Bioactive Metal-Organic Frameworks with Specific Metal-Nitrogen (M-N) Active Sites for Efficient Sonodynamic Tumor Therapy

Sonodynamic therapy (SDT) offers an efficient noninvasive strategy for cancer treatment. However, the efficiency of SDT is limited by the structural and physicochemical properties of ultrasound (US)-sensitive agents. Here, we discover the combination of bioactivity and sonodynamic properties of zeolite imidazolium framework-8 nanocrystals (ZIF-8 NCs) for efficient tumor therapy. ZIF-8 NCs are susceptible to biodegradation to release zinc ions (Zn²⁺) triggered by the weakly acidic tumor microenvironment, demonstrating the bioactivity to induce apoptosis in cancer cells. Density functional theory calculations combined with experiments revealed that the unsaturated zinc-nitrogen (Zn-N) active sites on the surface of ZIF-8 NCs allow an enhanced electron transfer via ligand to metal charge transfer bands from the highest occupied molecular orbitals to the lowest unoccupied molecular orbitals. This process is critical for the generation of reactive oxygen species by metal-organic frameworks (MOFs) under US irradiation. In vivo experiments show that ZIF-8 NCs exhibit high tumor inhibition efficiency (84.6%) as both a bioactive anticancer agent and a sonosensitizer. We believe that this study can expand the application of MOFs and contribute to a better understanding of the mechanism of action of sonosensitizers.

Boosted Li+ transference number enabled via interfacial engineering for dendrite-free lithium metal anodes

Adverse dendritic growth destabilizes Li metal anodes (LMAs), dramatically limiting the commercial applications of Li metal batteries (LMBs). Herein, ZIF-67 with unsaturated coordinative metal sites is used to construct a protective coating to immobilize anions, which is capable of increasing the Li⁺ transference number (t_Li⁺) to mitigate the electrolyte concentration gradient in the vicinity of LMAs. In addition, the ZIF-67-based layer provides highly ordered ionic diffusion pathways, thus enabling dendrite-free Li deposition. With a considerable Li⁺ transference number of 0.57, ZIF-67-Cu@Li symmetric cells deliver a superior long-term performance (over 1000 h), and Li-O₂ full batteries with ZIF-67-Cu@Li electrodes display a high energy density of 1911.61 W h kg^-1.

Origins of Acid-Gas Stability Behavior in Zeolitic Imidazolate Frameworks: The Unique High Stability of ZIF-71

Zeolitic imidazolate frameworks (ZIFs) are promising materials for industrial process separations, but recent literature reports have highlighted their vulnerability to acid gases (e.g., SO₂, CO₂, NO₂, H₂S), often present in practical applications. While previous work has documented the widely varying stability behavior of many ZIFs under varying (humid and dry) acid gas environments, efforts to explain or correlate these experimental observations via empirical descriptors have not succeeded. A key observation is that ZIF-71 (RHO topology) is an extraordinarily stable ZIF material, retaining both structure and porosity under prolonged humid SO₂ exposure whereas many other well-known ZIFs with different linkers and topologies (such as ZIF-8) were shown to degrade. Through a combination of hybrid quantum mechanics/molecular mechanics (QM/MM) based methods and statistical mechanical models, we successfully explain this important experimental observation via atomistic investigations of the reaction mechanism. Our holistic approach reveals an ∼9 times lower average defect formation rate in ZIF-71 RHO compared to ZIF-8 SOD, leading to the conclusion that the observed experimental stability of this material rises from kinetic effects. Moreover, our analysis reveals that differing stability of the two materials is determined by the distributions of acid gas molecules, which is difficult to capture using empirical descriptors. Our results suggest wider applicability of the present approach, toward identifying tuned functional groups and topologies that move the acid gas distributions away from more reactive sites and thus allow enhanced kinetic stability.

Heterogenizing a Homogeneous Nickel Catalyst Using Nanoconfined Strategy for Selective Synthesis of Mono- and 1,2-Disubstituted Benzimidazoles

A homogeneous Ni-phenanthroline catalyst was successfully immobilized into the cavities of a metal-organic framework, ZIF-8. The as-synthesized heterogeneous catalyst, Ni-Phen@ZIF, represents the first MOF based catalyst that enables dehydrogenative coupling of alcohols with aromatic diamines for selective synthesis of both mono- and 1,2-disubstituted benzimidazoles. The catalyst survived under harsh basic conditions, characterized by SEM, TEM, BET, PXRD, and EDX elemental mappings. The presence of the nanoconfined Ni-phenanthroline complex and the formation of extra Lewis acid sites during catalysis in the Ni-Phen@ZIF structure, confirmed by TPD analysis and kinetic experiments, might be responsible for higher activity and selectivity.

Effect of MAF-6 Crystal Size on Its Physicochemical and Catalytic Properties in the Cycloaddition of CO2 to Propylene Oxide

Zeolitic imidazolate frameworks MAF-5 and MAF-6 based on Zn2+ and 2-ethylimidazole were demonstrated to be efficient heterogeneous catalysts in solvent-free coupling of CO2 and propylene oxide (PO) to produce propylene carbonate (PC) at 0.8 MPa of CO2 and 80 °C. Activity of MAF-5 was lower in comparison with MAF-6 due to the difference in their structural and textural characteristics. MAF-6 samples with particle size of 190 ± 20, 360 ± 30, and 810 ± 30 nm were prepared at room temperature from [Zn(NH3)4](OH)2 and 2-ethylimidazole. Control of particle size was achieved by variation of type of alcohol in alcohol/cyclohexane media for the preparation of MAF-6. According to this comprehensive study, the yield of PC was found to decrease with increasing crystal size of the MAF-6 material, which was related to the change in textural properties and the number and localization of active sites. The combination of MAF-6 with particle size of with particle size of 190 ± 20 nm and tetrabutylammonium bromide ([n-Bu4N]Br) as co-catalyst led to an approximately 4-fold enhancement in the yield of PC (80.5%). Compared with reported ZIFs catalysts, the efficiencies of MAF-5/[n-Bu4N]Br and MAF-6/[n-Bu4N]Br binary systems were comparable and higher under similar reaction conditions.

Visualization of gaseous iodine adsorption on single zeolitic imidazolate framework-90 particles

Zeolitic imidazolate frameworks (ZIFs) are very useful as high-capacity iodine (I₂) adsorbents. The adsorption performance is usually probed by measuring a statistical average property over an entire sample consisting of a large number of ZIF particles, leaving the interparticle heterogeneity information among individuals. Here we report a dark-field microscopy (DFM) method to visualize gaseous I₂ adsorption on single ZIF-90 particles in situ and in real time. The adsorption of I₂ is found to alter the scattering spectrum of ZIF-90 particles, inducing a distinct color change from bluewhite to yellow. According to correlating the adsorption amount of gaseous I₂ with the change of B value from DFM images, we quantitatively image the adsorption process and estimate the related kinetic parameters at the single particle level. Single particle measurements clarify the large particle-to-particle heterogeneity in adsorption reactivity and significant adsorption activity improvement of ZIF-90 after introduction of linker defects, which provides a microscopic understanding of the structure-activity relationship. We further demonstrate the capacity of this strategy for studying gaseous I₂ adsorption on single ZIF-91 particle as a derivative of ZIF-90 to illustrate the generality.

Zeolitic imidazolate frameworks are promising as high-capacity iodine adsorbents. Here the authors image the gaseous I₂ adsorption on single ZIF-90 particles, clarifying the inter-particle heterogeneity in adsorption reactivity and performance improvement after introduction of linker defects .

Mechanistic Study on Thermally Induced Lattice Stiffening of ZIF-8

The flexibility of the ZIF-8 aperture, which inhibits a molecular cutoff of 3.4 Å, can be reduced by rapid heat treatment to obtain CO₂-selective membranes. However, the early stages of the structural, morphological, and chemical changes responsible for the lattice rigidification remain elusive. Herein, using ex situ and in situ experiments, we determine that a small shrinkage of the unit-cell parameter, ∼0.2%, is mainly responsible for this transformation. Systematic gas permeation studies show that one needs to achieve this shrinkage without a disproportionately large shrinkage in the grain size of the polycrystalline film to avoid the formation of cracks. We show that this condition is uniquely achieved in a short time by exposure of ZIF-8 to a mildly humid environment where lattice parameter shrinkage is accelerated by the incorporation of linker vacancy defects, while the shrinkage in grain size is limited. The water-vapor-led incorporation of linker vacancy defects takes place with an energy barrier of 123 kJ mol^-1, much higher than that for the thermal degradation of ZIF-8, <80 kJ mol^-1. The latter is promoted by heat treatment in a dry environment at a relatively higher temperature; however, this condition does not shrink the lattice parameters at short exposure time.

Influence of Substitutional Defects in ZIF-8 Membranes on Reverse Osmosis Desalination: A Molecular Dynamics Study

In this study, molecular dynamics simulation is used to investigate the effects of water-based substitutional defects in zeolitic imidazolate frameworks (ZIF)-8 membranes on their reverse osmosis (RO) desalination performance. ZIF-8 unit cells containing up to three defect sites are used to construct the membranes. These substitutional defects can either be Zn defects or linker defects. The RO desalination performance of the membranes is assessed in terms of the water flux and ion rejection rate. The effects of defects on the interactions between the ZIF-8 membranes and NaCl are investigated and explained with respect to the radial distribution function (RDF) and ion density distribution. The results show that ion adsorption on the membranes occurs at either the nitrogen atoms or the defect sites. Complete NaCl rejection can be achieved by introducing defects to change the size of the pores. It has also been discovered that the presence of linker defects increases membrane hydrophilicity. Overall, molecular dynamics simulations have been used in this study to show that water-based substitutional defects in a ZIF-8 structure reduce the water flux and influence its hydrophilicity and ion adsorption performance, which is useful in predicting the type and number of defect sites per unit cell required for RO applications. Of the seven ZIF-8 structures tested, pristine ZIF-8 exhibits the best RO desalination performance.

Selective Adsorption of Aqueous Diclofenac Sodium, Naproxen Sodium, and Ibuprofen Using a Stable Fe3O4-FeBTC Metal-Organic Frameworka

The FeBTC metal–organic framework (MOF) incorporated with magnetite is proposed as a novel material to solve water contamination with last generation pollutants. The material was synthesized by in situ solvothermal methods, and Fe₃O₄ nanoparticles were added during FeBTC MOF synthesis and used in drug adsorption. X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), and Raman spectroscopy characterized the materials, with N₂-physisorption at 77 K. Pseudo-second-order kinetic and Freundlich models were used to describe the adsorption process. The thermodynamic study revealed that the adsorption of three drugs was a feasible, spontaneous exothermic process. The incorporation of magnetite nanoparticles in the FeBTC increased the adsorption capacity of pristine FeBTC. The Fe₃O₄–FeBTC material showed a maximum adsorption capacity for diclofenac sodium (DCF), then by ibuprofen (IB), and to a lesser extent by naproxen sodium (NS). Additionally, hybridization of the FeBTC with magnetite nanoparticles reinforced the most vulnerable part of the MOF, increasing the stability of its thermal and aqueous media. The electrostatic interaction, H-bonding, and interactions in the open-metal sites played vital roles in the drug adsorption. The sites’ competition in the multicomponent mixture’s adsorption showed selective adsorption (DCF) and (NS). This work shows how superficial modification with a low-surface-area MOF can achieve significant adsorption results in water pollutants.

Solvent-Dependent Adsorption-Driven Mechanism for MOFs-Based Yolk-Shell Nanostructures

Metal-organic frameworks (MOFs)-based yolk-shell nanostructures have drawn enormous attention recently due to their multifunctionality. However, the regulations of the size and morphology of yolk-shell nanostructures are still limited by the unclear formation mechanism. Herein, we first demonstrated a solvent-dependent adsorption-driven mechanism for synthesizing yolk-shelled MOFs-based nanostructures coated with mesoporous SiO₂ shells (ZIF-8@mSiO₂ ) with tunable size and morphology. The selective and competitive adsorption of methanol (CH₃ OH) and water (H₂ O) on ZIF-8 core were found to have decisive effects on inducing the morphology evolution of yolk-shell nanostructures. The obtained yolk-shelled ZIF-8@mSiO₂ nanostructures show great promise in generating acoustic cavitation effect for sonodynamic cancer therapy in vitro. We believe that this work will not only help us to design novel MOFs-based yolk-shell nanostructures, but also promote the widespread application of MOFs materials.

H2S Stability of Metal-Organic Frameworks: A Computational Assessment

The H₂S stability of a range of metal-organic frameworks (MOFs) was systematically assessed by first-principles calculations. The most likely degradation mechanism was first determined and we identified the rate constant of the degradation reaction as a reliable descriptor for characterizing the H₂S stability of MOFs. A qualitative H₂S stability ranking was thus established for the list of investigated materials. Structure-stability relationships were further envisaged considering several variables including the nature of the linkers and their grafted functional groups, the pore size, the nature of metal sites, and the presence/nature of coordinatively unsaturated sites. This knowledge enabled the anticipation of the H₂S stability of one prototypical MOF, e.g., MIL-91(Ti), which has been previously proposed as a good candidate for CO₂ capture. This computational strategy enables an accurate and easy handling assessment of the H₂S stability of MOFs and offers a solid alternative to experimental characterizations that require the manipulation of a highly toxic and corrosive molecule.

Near-Field Infrared Nanospectroscopy Reveals Guest Confinement in Metal-Organic Framework Single Crystals

Metal-organic frameworks (MOFs) can provide exceptional porosity for molecular guest encapsulation useful for emergent applications in sensing, gas storage, drug delivery, and optoelectronics. Central to the realization of such applications, however, is the successful incorporation of a functional guest confined within the host framework. Here, we demonstrate, for the first time, the feasibility of scattering-type scanning near-field optical microscopy (s-SNOM) and nano-Fourier transform infrared (nanoFTIR) spectroscopy, in concert with density functional theory (DFT) calculations to reveal the vibrational characteristics of the Guest@MOF systems. Probing individual MOF crystals, we pinpoint the local molecular vibrations and, thus, shed new light on the host-guest interactions at the nanoscale. Our strategy not only confirms the successful encapsulation of luminescent guest molecules in the porous host framework in single crystals but also further provides a new methodology for nanoscale-resolved physical and chemical identification of wide-ranging framework materials and designer porous systems for advanced applications.

Electronic Structure Modeling of Metal-Organic Frameworks

Owing to their molecular building blocks, yet highly crystalline nature, metal-organic frameworks (MOFs) sit at the interface between molecule and material. Their diverse structures and compositions enable them to be useful materials as catalysts in heterogeneous reactions, electrical conductors in energy storage and transfer applications, chromophores in photoenabled chemical transformations, and beyond. In all cases, density functional theory (DFT) and higher-level methods for electronic structure determination provide valuable quantitative information about the electronic properties that underpin the functions of these frameworks. However, there are only two general modeling approaches in conventional electronic structure software packages: those that treat materials as extended, periodic solids, and those that treat materials as discrete molecules. Each approach has features and benefits; both have been widely employed to understand the emergent chemistry that arises from the formation of the metal-organic interface. This Review canvases these approaches to date, with emphasis placed on the application of electronic structure theory to explore reactivity and electron transfer using periodic, molecular, and embedded models. This includes (i) computational chemistry considerations such as how functional, k-grid, and other model variables are selected to enable insights into MOF properties, (ii) extended solid models that treat MOFs as materials rather than molecules, (iii) the mechanics of cluster extraction and subsequent chemistry enabled by these molecular models, (iv) catalytic studies using both solids and clusters thereof, and (v) embedded, mixed-method approaches, which simulate a fraction of the material using one level of theory and the remainder of the material using another dissimilar theoretical implementation.

A new route to porous metal–organic framework crystal–glass composites

A lower temperature route to metal–organic framework crystal–glass composites is presented. Specifically, the annealing pre-formed ZIF-62 glass with a crystalline MOF above T_g will enable formation of a greatly expanded range of materials.

A DFT study on the effect of oxygen vacancies and H2O in Mn-MOF-74 on SCR reactions

As one of the main air pollutants, nitrogen oxides (NOx) have serious effects on human health and the environment. In our previous study, we found that Mn-MOF-74 shows excellent catalytic performance for the selective catalytic reduction (SCR) reaction with NH3 being the reductant (NH3-SCR) at low temperature. To obtain a further understanding of the NH3-SCR mechanism in Mn-MOF-74, in this paper, we investigated two important parts of the NH3-SCR process in Mn-MOF-74 using the density functional theory (DFT) method. On the one hand, the structural characteristics of two types of oxygen vacancies of Mn-MOF-74, namely carboxyl oxygen vacancies and hydroxyl oxygen vacancies, and their adsorption properties to reaction species were calculated. It was found that the oxygen vacancies not only activate the reaction species, but also promote the desorption of NO2 molecules from metal sites for the subsequent rapid SCR reactions. On the other hand, we studied the effect of H2O on the structural stability and catalytic performance of Mn-MOF-74. It was found that the interaction of Mn-O bonds was weakened by H2O. Therefore, the influence of H2O should be considered for the future design of MOF-based catalysts for the SCR process.

Restricting Lattice Flexibility in Polycrystalline Metal-Organic Framework Membranes for Carbon Capture

Although polycrystalline metal-organic framework (MOF) membranes offer several advantages over other nanoporous membranes, thus far they have not yielded good CO₂ separation performance, crucial for energy-efficient carbon capture. ZIF-8, one of the most popular MOFs, has a crystallographically determined pore aperture of 0.34 nm, ideal for CO₂ /N₂ and CO₂ /CH₄ separation; however, its flexible lattice restricts the corresponding separation selectivities to below 5. A novel postsynthetic rapid heat treatment (RHT), implemented in a few seconds at 360 °C, which drastically improves the carbon capture performance of the ZIF-8 membranes, is reported. Lattice stiffening is confirmed by the appearance of a temperature-activated transport, attributed to a stronger interaction of gas molecules with the pore aperture, with activation energy increasing with the molecular size (CH₄ > CO₂ > H₂ ). Unprecedented CO₂ /CH₄ , CO₂ /N₂ , and H₂ /CH₄ selectivities exceeding 30, 30, and 175, respectively, and complete blockage of C₃ H₆ , are achieved. Spectroscopic and X-ray diffraction studies confirm that while the coordination environment and crystallinity are unaffected, lattice distortion and strain are incorporated in the ZIF-8 lattice, increasing the lattice stiffness. Overall, RHT treatment is a facile and versatile technique that can vastly improve the gas-separation performance of the MOF membranes.