Electrodeposition of Zwitterionic PEDOT Films for Conducting and Antifouling Surfaces

Pyridylboronic Acid- and Poly(ethylene glycol)-Functionalized PEDOT Copolymers for Electrochemical Detection of Sialic Acid-Rich Cancer Biomarkers in Serum

The detection of carbohydrate antigen 19-9 (CA199), a critical biomarker for pancreatic, colorectal, and gastric cancers, is essential for early diagnosis and disease monitoring. Traditional antibody-based assays for CA199 detection are limited by high costs, time-consuming procedures, and susceptibility to nonspecific interference. This study presents an electrochemical biosensor based on a multifunctional poly(EDOT-PyBA-co-EDOT-PEG) copolymer designed to overcome these limitations. The biosensor integrates pyridylboronic acid (PyBA) moieties for specific recognition of sialic acid residues and poly(ethylene glycol) (PEG) chains for antifouling properties within a conductive PEDOT framework. By eliminating antibody dependency, the biosensor reduces costs, enhances stability, and simplifies the diagnostic process. Surface characterization confirmed the successful incorporation of PyBA and PEG units, while electrochemical impedance spectroscopy enabled sensitive detection of CA199 with a limit of detection of 0.05 U·mL-1 and a linear response range from 0.05 to 40 U·mL-1. Recovery tests in spiked human serum samples demonstrated excellent accuracy (97-109% recovery), validating the biosensor's reliability in complex biological matrices. The rationally designed copolymer provides both high sensitivity and specificity while maintaining resistance to biofouling in serum samples. This work establishes a scalable, cost-effective platform for glycoprotein biomarker detection, advancing the field of clinical diagnostics and cancer monitoring.

Enhanced Electrochemiluminescence Detection of Dopamine Using Antifouling PEDOT-Modified SPEs for Complex Biological Samples

Detecting medically important biomarkers in complex biological samples without prior treatment or extraction poses a major challenge in biomedical analysis. Electrochemical methods, specifically electrochemiluminescence (ECL), show potential due to their high sensitivity, minimal background noise, and straightforward operation. This study investigates the ECL performance of screen-printed electrodes (SPEs) modified with the conductive polymer poly(3,4-ethylenedioxythiophene) (PEDOT) and its derivatives for dopamine (DA) detection. PEDOT modification significantly enhances ECL intensity, improves sensitivity, and expands the linear range for DA detection. Functionalizing PEDOT with ethylene glycol (EG) further enhances stability, specificity, and resistance to interferences for DA detection. These modified SPEs demonstrate the linear range of 1-200 μM and a detection limit as low as 0.887 nM (S/N = 3), surpassing many previous studies using SPEs. Moreover, the PEDOT-EG4-OMe-modified SPEs can reliably detect DA in solutions with high protein concentrations or artificial cerebrospinal fluid. These results suggest that the PEDOT derivative-modified SPE can serve as reusable and sensitive DA sensors in complex biological environments, highlighting the potential of the ECL system for a range of challenging applications.

Chelation-Induced Zwitterion-like Antifouling Behavior on Anionic Poly(3,4-ethylenedioxythiophene) Surfaces

Antifouling properties are crucial for enhancing the longevity and functionality of biomedical implants, drug delivery systems, and biosensors. Zwitterionic polymers are renowned for their exceptional surface hydration and charge neutrality, which effectively resist biomolecular adsorption and protein attachment. We propose an innovative approach to develop zwitterion-like antifouling surfaces by chelating divalent cations with anionic poly(3,4-ethylenedioxythiophene) (PEDOT) films, specifically PEDOT-PO4 and PEDOT-COOH. The chelation behavior of these films was systematically evaluated using Na+, Mg2+, and Ca2+ ions. Divalent ions, particularly Ca2+ and Mg2+, exhibit a strong affinity for the anionic groups, leading to significant antifouling properties. These modified surfaces effectively repelled both negatively charged bovine serum albumin (BSA) and positively charged lysozyme (LYZ) proteins across various pH environments. This study offers valuable insights into the antifouling characteristics of charged surfaces, enhancing our understanding of how ion-mediated surface modifications influence protein adsorption and interactions.

In Situ Growth of Columnar PEG on PEDOT and Its Antifouling Properties

The antifouling properties of conductive polymers have received extensive attention for biosensor and bioelectronic applications. Polyethylene glycol (PEG) is a well-known antifouling material, but the controlled regulation of the surface topography of PEG without a template remains a challenge. Here, we show a columnar structure antifouling conductive polymer brush with enhanced antifouling properties and considerable conductivity. The method involves synthesizing the 3,4-ethylenedioxythiophene monomer modified with azide (EDOT-N3), the electropolymerization of PEDOT-N3, and the in situ growth of PEG polymer brushes on PEDOT through double-click reactions. The resultant columnar structure polymer brush exhibits high electrical conductivity (3.5 Ω·cm2), ultrahigh antifouling property, electrochemical stability (capacitance retention was 93.8% after 2000 cycles of CV scans in serum), and biocompatibility.

Efficient and Modular Biofunctionalization of Thiophene-Based Conjugated Polymers through Embedded Latent Disulfide

Biofunctionalized conjugated polymers (i.e., carrying enzymes, antibodies, and nucleic acids) are of great interest for many biological applications, yet efficient biofunctionalization of conjugated polymers under biocompatible conditions is challenging. We report a facile strategy to make biofunctionalized conjugated polymers through thiol-ene chemistry with embedded latent disulfide functional groups. This is made possible through the design of a cyclic disulfide-containing dioxythiophene, which can be integrated into a series of conjugated polymers via acid-catalyzed chain-growth polymerization. The utility of such a biofunctionalized polymer with glucose oxidase has been examined in organic electrochemical transistors for the selective sensing of glucose. This work provides a venue for the creation of biofunctional organic semiconductors.

Chemical antifouling strategies in sensors for food analysis: A review

Surface biofouling induced by the undesired nonspecific adsorption of foulants (e.g., coexisting proteins and cells) in food matrices is a major issue of sensors for food analysis, hindering their reliability and accuracy of sensing. This issue can be addressed by developing antifouling strategies to prevent or alleviate nonspecific binding. Chemical antifouling strategies involve the use of chemical modifiers (i.e., antifouling materials) to strongly hydrate the surface and reduce surface biofouling. Through appropriate immobilization approaches, antifouling materials can be tethered onto sensors to form antifouling surfaces with well-ordered structures, balanced surface charges, and appropriate surface density and thickness. A rational antifouling surface can reduce the matrix effect, simplify sample pretreatment, and improve analytical performance. This review summarizes recent developments in chemical antifouling strategies in sensing. Surface antifouling mechanisms and common antifouling materials are described, and factors that may influence the antifouling effects of antifouling surfaces and approaches incorporating antifouling materials onto sensing surfaces are highlighted. Moreover, the specific applications of antifouling sensors in food analysis are introduced. Finally, we provide an outlook on future developments in antifouling sensors for food analysis.

Chemically revised conducting polymers with inflammation resistance for intimate bioelectronic electrocoupling

Conducting polymers offer attractive mixed ionic-electronic conductivity, tunable interfacial barrier with metal, tissue matchable softness, and versatile chemical functionalization, making them robust to bridge the gap between brain tissue and electronic circuits. This review focuses on chemically revised conducting polymers, combined with their superior and controllable electrochemical performance, to fabricate long-term bioelectronic implants, addressing chronic immune responses, weak neuron attraction, and long-term electrocommunication instability challenges. Moreover, the promising progress of zwitterionic conducting polymers in bioelectronic implants (≥4 weeks stable implantation) is highlighted, followed by a comment on their current evolution toward selective neural coupling and reimplantable function. Finally, a critical forward look at the future of zwitterionic conducting polymers for in vivo bioelectronic devices is provided.

Sialic acid biosensing by post-printing modification of PEDOT:PSS with pyridylboronic acid

A poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS)-based conducting polymer, which has biorecognition capabilities, has promising biosensing applications. Previously, we developed a facile method for post-printing chemical modification of PEDOT:PSS thin films from commercial sources. Molecular recognition elements were directly introduced into the PSS side chain by a two-step chemical reaction: introduction of an ethylenediamine linker via an acid chloride reaction of the sulfonate moiety, and subsequent receptor attachment to the linker via amine coupling. In this study, the same method was used to introduce 6-carboxypyridine-3-boronic acid (carboxy-PyBA) into the linker for specifically detecting N-acetylneuraminic acid (sialic acid, SA), as a cancer biomarker. The surface-modified PEDOT:PSS films were characterized by X-ray photoelectron spectroscopy, attenuated total reflection Fourier-transform infrared spectroscopy, and static water contact angle and conductivity measurements. The specific interaction between PyBA and SA was detected by label-free reagent-free potentiometry. The SA-specific negative potential responses of modified PEDOT:PSS electrodes, which was ascribed to an SA carboxyl anion, were observed in a physiologically relevant SA range (1.6-2.9 mM) at pH 5, in a concentration-dependent manner even in the presence of 10% fetal bovine serum. The sensitivity was -2.9 mV/mM in 1-5 mM SA with a limit of detection of 0.7 mM. The sensing performances were almost equivalent to those of existing graphene-based electrical SA sensors. These results show that our chemical derivatization method for printing PEDOT:PSS thin films will have applications in SA clinical diagnostics.

Biguanide- and Oligo(Ethylene Glycol)-Functionalized Poly(3,4-Ethylenedioxythiophene): Electroactive, Antimicrobial, and Antifouling Surface Coatings

The challenge of infectious diseases remains a critical concern to the global public health. Recently, it is common to encounter touch-screen electronic devices everywhere to access services. The surface of such devices may easily get contaminated by an infected person, which leads to transmission of infectious diseases between individuals. Moreover, the challenge is complicated by surgical infections from implantable biomedical devices. Such problems can be minimized by the use of long-term active antimicrobial surface coatings. We present herein the preparation of novel electroactive antimicrobial surface coatings through the covalent attachment of the biguanide moiety onto 3,4-ethylenedioxythiophene (EDOT). The biguanide-functionalized EDOT (EDOT-BG) was thus electropolymerized on different substrates to give the corresponding poly(EDOT-BG) polymer. The poly(EDOT-BG) polymer showed an excellent bactericidal efficiency (∼92% bacterial death) and excellent biocompatibility with mammalian cells. Furthermore, the antimicrobial EDOT-BG was electro-copolymerized with antifouling tetra ethylene glycol functionalized-EDOT (EDOT-EG4) to give a multifunctional poly(EDOT-EG4-co-EDOT-BG) copolymer. The poly(EDOT-EG4-co-EDOT-BG) copolymer showed excellent resistance to protein adsorption and mammalian/bacterial cell binding without losing its bactericidal efficiency. These novel materials can be applied to domestic and bioelectronic devices to minimize infectious diseases.

Zwitterionic Conducting Polymers: From Molecular Design, Surface Modification, and Interfacial Phenomenon to Biomedical Applications

Conducting polymers (CPs) have gained attention as electrode materials in bioengineering mainly because of their mechanical softness compared to conventional inorganic materials. To achieve better performance and broaden bioelectronics applications, the surface modification of soft zwitterionic polymers with antifouling properties represents a facile approach to preventing unwanted nonspecific protein adsorption and improving biocompatibility. This feature article emphasizes the antifouling properties of zwitterionic CPs, accompanied by their molecular synthesis and surface modification methods and an analysis of the interfacial phenomenon. Herein, commonly used methods for zwitterionic functionalization on CPs are introduced, including the synthesis of zwitterionic moieties on CP molecules and postsurface modification, such as the grafting of zwitterionic polymer brushes. To analyze the chain conformation, the structure of bound water in the vicinity of zwitterionic CPs and biomolecule behavior, such as protein adsorption or cell adhesion, provide critical insights into the antifouling properties. Integrating these characterization techniques offers general guidelines and paves the way for designing new zwitterionic CPs for advanced biomedical applications. Recent advances in newly designed zwitterionic CP-based electrodes have demonstrated outstanding potential in modern biomedical applications.

Soft Bioelectronics Based on Nanomaterials

Recent advances in nanostructured materials and unconventional device designs have transformed the bioelectronics from a rigid and bulky form into a soft and ultrathin form and brought enormous advantages to the bioelectronics. For example, mechanical deformability of the soft bioelectronics and thus its conformal contact onto soft curved organs such as brain, heart, and skin have allowed researchers to measure high-quality biosignals, deliver real-time feedback treatments, and lower long-term side-effects in vivo. Here, we review various materials, fabrication methods, and device strategies for flexible and stretchable electronics, especially focusing on soft biointegrated electronics using nanomaterials and their composites. First, we summarize top-down material processing and bottom-up synthesis methods of various nanomaterials. Next, we discuss state-of-the-art technologies for intrinsically stretchable nanocomposites composed of nanostructured materials incorporated in elastomers or hydrogels. We also briefly discuss unconventional device design strategies for soft bioelectronics. Then individual device components for soft bioelectronics, such as biosensing, data storage, display, therapeutic stimulation, and power supply devices, are introduced. Afterward, representative application examples of the soft bioelectronics are described. A brief summary with a discussion on remaining challenges concludes the review.

Organic Bioelectronics for In Vitro Systems

Bioelectronics have made strides in improving clinical diagnostics and precision medicine. The potential of bioelectronics for bidirectional interfacing with biology through continuous, label-free monitoring on one side and precise control of biological activity on the other has extended their application scope to in vitro systems. The advent of microfluidics and the considerable advances in reliability and complexity of in vitro models promise to eventually significantly reduce or replace animal studies, currently the gold standard in drug discovery and toxicology testing. Bioelectronics are anticipated to play a major role in this transition offering a much needed technology to push forward the drug discovery paradigm. Organic electronic materials, notably conjugated polymers, having demonstrated technological maturity in fields such as solar cells and light emitting diodes given their outstanding characteristics and versatility in processing, are the obvious route forward for bioelectronics due to their biomimetic nature, among other merits. This review highlights the advances in conjugated polymers for interfacing with biological tissue in vitro, aiming ultimately to develop next generation in vitro systems. We showcase in vitro interfacing across multiple length scales, involving biological models of varying complexity, from cell components to complex 3D cell cultures. The state of the art, the possibilities, and the challenges of conjugated polymers toward clinical translation of in vitro systems are also discussed throughout.

Combination of AFM and Electrochemical QCM-D for Probing Zwitterionic Polymer Brushes in Water: Visualization of Ionic Strength and Surface Potential Effects

The surface modification of soft zwitterionic polymer brushes with antifouling properties represents a facile approach to enhancing the performance of bioelectronics. Ionic strength and applied potentials play a crucial role in controlling polymer brushes' conformation and hydration states. In this study, we quantitatively investigated and compared poly(2-methacryloyloxyethyl phosphorylcholine) (PMPC) and poly(sulfobetaine methacrylate) (PSBMA) brushes at different salt concentrations and applied surface potentials. Initiator-containing poly(3,4-ethylenedioxythiophene) films (poly(EDOT-Br)) were prepared by electropolymerization. After the conducting polymer was deposited, polymer brushes grew from the electrode surface through surface-initiated atom-transfer radical polymerization (SI-ATRP). Polymer brushes were carefully characterized for their surface morphologies using an atomic force microscope (AFM). The force volume method measured using AFM enabled the analysis of the Young's modulus of the two polymer brushes. Hydration states and protein binding behaviors of polymer brushes were examined using quartz crystal microbalance with dissipation (QCM-D). We further integrated a potentiostat with the QCM-D to conduct an electrochemical QCM-D study. The energy dissipation and frequency changes corresponded to the ion adsorption on the film surface under different ionic strengths. The results of both hydration states and nonspecific protein binding behavior indicate that PMPC brushes have greater ionic strength independency, implying the conformation of the unchanged PMPC brushes. Moreover, we illustrated how the surface potential influences nonspecific and specific binding behavior on PMPC brushes on PEDOT films compared with electrified poly(EDOT-PC) electrodes. We concluded that PMPC brushes exhibit unique behaviors that are barely affected by ion concentration, and that the brushes' modification results in less influence by surface potential due to the finite Debye length influencing the electrode surface to outer environment in an NaCl aqueous solution.

Anti-fouling peptide functionalization of ultraflexible neural probes for long-term neural activity recordings in the brain

Implantable neural probes constitute an essential tool for neuronal activity recordings in basic neuroscience and also hold great promise for the development of neuroprosthesis to restore lost motor or sensory functions of the body. However, conventional neural probes are susceptible to biofouling because of their physicochemical mismatch with neural tissues, resulting in signal degradation in chronic studies. Here, we describe an ultraflexible neural probe (uFNP) with anti-fouling zwitterionic peptide modification for long-term stable neural activity recordings. The anti-fouling zwitterionic peptide consists of two parts: negatively charged glutamic acid (E) and positively charged lysine (K) formed EKEKEK (EK) head to create a hydration layer that resists protein adsorption on the microelectrodes, and a fragment of laminin formed IKVAV tail to increase the adhesion of the microelectrodes to neuronal cells. We demonstrate that EK-IKVAV modified uFNPs can allow for stable neuronal activity recordings over 16 weeks. Immunohistological studies confirm that EK-IKVAV functionalized uFNPs could induce greatly reduced neuronal cell loss. Collectively, these results suggest that the anti-fouling zwitterionic peptide functionalization of uFNPs provide a promising route to construct biocompatible and stable neural interfaces.

Photoactive antimicrobial coating based on a PEDOT-fullerene C60 polymeric dyad

A photostable and photodynamic antimicrobial surface was successfully obtained and applied to photoinactivate microorganisms. This approach was based on the synthesis of a fullerene C60 derivative (EDOT-C60) where fullerene C60 is covalently linked to 3,4-ethylenedioxythiophene (EDOT) through a 1,3-dipolar cycloaddition reaction. This dual-functional monomer bears an EDOT center connected via an alkyl chain to a fullerene C60 moiety. In this structure, EDOT acts as an electropolymerizable unit that allows the film formation over conducting substrates, while fullerene C60 performs the photodynamic antimicrobial activity. Electrochemical polymerization of EDOT was used to obtain stable and photodynamic polymeric films (PEDOT-C60) in a controllable procedure. Cyclic voltammetry and UV-visible spectroscopy studies showed that the fullerene C60 units were not altered during the electropolymerization process, obtaining surfaces with high fullerene content. Photobleaching measurements demonstrated that the electropolymerized films were highly photostable. Moreover, photodynamic properties of PEDOT-C60 were compared with fullerene C60 and showed that electrodeposited films were able to generate reactive oxygen species (ROS) through the two photomechanisms, producing singlet molecular oxygen (type II) and superoxide radical anion (type I). All studies demonstrated that fullerene C60 moieties covalently attached to the polymeric matrix mainly conserve the photodynamic characteristics. Hence, photodynamic action sensitized by PEDOT-C60 was assessed in vitro against Staphylococcus aureus. The photosensitized inactivation by the electropolymerized films on bacteria suspensions produced >99.9% reduction in S. aureus survival. Fluorescence microscopy experiments with S. aureus adhered to the PEDOT-C60 surface showed a complete microbe annihilation. Also, the eradication of biofilms formed on PEDOT-C60 surfaces resulted in a photokilling >99.9% after visible light irradiation. Our results demonstrated that these antimicrobial photodynamic polymeric films are a promising and versatile platform to photoinactivate microorganisms and to obtain photostable self-sterilizing surfaces.

Real-Time Detection of Glyphosate by a Water-Gated Organic Field-Effect Transistor with a Microfluidic Chamber

This paper reports the development of a real-time monitoring system utilizing the combination of a water-gated organic field-effect transistor (WG-OFET) and a microfluidic chamber for the detection of the herbicide glyphosate (GlyP). For the realization of the real-time sensing with the WG-OFET, the surface of a polymer semiconductor was utilized as a sensing unit. The aqueous solution including the target analyte, which is employed as a gate dielectric of the WG-OFET, flows into a designed microfluidic chamber on the semiconductor layer and the gate electrode. As the sensing mechanism, the WG-OFET-based sensor utilizes the competitive complexation among carboxylate-functionalized polythiophene, a copper(II) (Cu²⁺) ion, and GlyP. The reversible accumulation and desorption of the positively charged Cu²⁺ ion on the semiconductor surface induced a change in the electrical double-layer capacitance (EDLC). The optimization of the microfluidic chamber enables a uniform water flow and contributes to real-time quantitative sensing of GlyP at a micromolar level. Thus, this study would lead to practical real-time sensing in water for various fields including environmental assessment.

A trade-off between antifouling and the electrochemical stabilities of PEDOTs

Strong nonspecific protein/cell adhesion on conducting polymer (CP)-based bioelectronic devices can cause an increase in the impedance or the malfunction of the devices. Incorporating oligo(ethylene glycol) or zwitterionic functionalities with CPs has demonstrated superior performance in the reduction of nonspecific adhesion. However, there is no report on the evaluation of the antifouling stability of oligo(ethylene glycol) and zwitterion-functionalized CPs under electrical stimulation as a simulation of the real situation of device operation. Moreover, there is a lack of understanding of the correlation between the molecular structure of antifouling CPs and the antifouling and electrochemical stabilities of the CP-based electrodes. To address the aforementioned issue, we fabricated a platform with antifouling poly(3,4-ethylenedioxythiophene) (PEDOT) featuring tri(ethylene glycol), tetra(ethylene glycol), sulfobetaine, or phosphorylcholine (PEDOT-PC) to evaluate the stability of the antifouling/electrochemical properties of antifouling PEDOTs before and after electrical stimulation. The results reveal that the PEDOT-PC electrode not only exhibits good electrochemical stability, low impedance, and small voltage excursion, but also shows excellent resistance toward proteins and HAPI microglial cells, as a cell model of inflammation, after the electrical stimulation. The stable antifouling/electrochemical properties of zwitterionic PEDOT-PC may aid its diverse applications in bioelectronic devices in the future.

Conjugated polymer nanostructures displaying highly photoactivated antimicrobial and antibiofilm functionalities

This work reports the use of conjugated polymer nanostructures (CPNs) as photoactivated antimicrobial compounds against Gram-positive and Gram-negative microorganisms. Two representative CPNs of polythiophene (PEDOT) and polyaniline (PANI) were prepared as nanofibres with an average diameter of 40 nm and length in the micrometer range. Both CPNs exhibited strong antimicrobial activity under UVA irradiation with the same fluence rate as the UVA component of the solar spectrum. The effect was tested using the Gram-positive bacteria Staphylococcus aureus and the Gram-negative bacteria Escherichia coli. The reduction of colony forming units (CFUs) reached >6 log for PEDOT concentrations as low as 33 ng mL-1. For PEDOT nanofibers, a complete inhibition of S. aureus and E. coli growth was reached at 883 ng mL-1 and 333 ng mL-1 respectively. The photoactivation effect of PANI nanofibres on S. aureus and E. coli was also high, with a CFU reduction of about 7 log and 4 log respectively for an exposure concentration of 33 ng mL-1. The antimicrobial activity was only high under light irradiation and was almost negligible for bulk PEDOT and PANI. The effect of polymeric nanofibers could be attributed to the photoinduced generation of reactive oxygen species, which may induce cell membrane damage, eventually leading to bacterial impairment and inhibition of their biofilm forming capacity. CPN PEDOT and PANI coatings were able to keep surfaces free of bacterial attachment and growth even after 20 h of previous contact with exponentially growing cultures in the dark. PEDOT and PANI CPNs demonstrated good cytocompatibility with human fibroblasts and the absence of hemolytic activity. The materials demonstrated advantages in terms of broad antibacterial spectrum, biofilm inhibition, and the absence of acute toxicity for biomedical applications.

Recent Advances of Conducting Polymers and Their Composites for Electrochemical Biosensing Applications

Conducting polymers (CPs) have been at the center of research owing to their metal-like electrochemical properties and polymer-like dispersion nature. CPs and their composites serve as ideal functional materials for diversified biomedical applications like drug delivery, tissue engineering, and diagnostics. There have also been numerous biosensing platforms based on polyaniline (PANI), polypyrrole (PPY), polythiophene (PTP), and their composites. Based on their unique properties and extensive use in biosensing matrices, updated information on novel CPs and their role is appealing. This review focuses on the properties and performance of biosensing matrices based on CPs reported in the last three years. The salient features of CPs like PANI, PPY, PTP, and their composites with nanoparticles, carbon materials, etc. are outlined along with respective examples. A description of mediator conjugated biosensor designs and enzymeless CPs based glucose sensing has also been included. The future research trends with required improvements to improve the analytical performance of CP-biosensing devices have also been addressed.

Sulfonated Polyaniline as Zwitterionic and Conductive Interfaces for Anti-Biofouling on Open Electrode Surfaces in Electrodynamic Systems

Electrodynamic systems for bioanalytical applications constantly suffer from biofouling due to electrical field-induced nonspecific bioadsorption on electrode surfaces. To minimize this issue, surface modification using anti-biofouling and conductive materials is necessary to not only protect the electrode surface from nonspecific bioadsorption but also maintain desired electrodynamic properties for electrode operation. In this study, we designed and prepared a conductive, zwitterionic, and self-doped sulfonated polyaniline (SPANI) coating on Au electrode surfaces for anti-biofouling applications. The zwitterionic coating was fabricated by electrochemical polymerization of aniline on the Au electrode surface functionalized with cysteamine (HS-CH₂CH₂-NH₂) and then a post-polymerization treatment with fuming sulfuric acid. We found that the SPANI-coated electrodes exhibited an excellent anti-biofouling ability in dielectrophoresis (DEP) capturing-and-releasing processes, with a very low average residual mass rate of 1.44% for the SPANI-5s electrode, whereas electrodes modified with poly(ethylene glycol) (PEG) gave an average residual mass rate of 14.30%. Even under continuous operation for more than 1 h, the SPANI-5s electrode still showed stable anti-biofouling ability for an 11-cycle E. coli capturing-and-releasing DEP process, with the residual mass rate for all 11 cycles being kept at or below 2.18% to give an average residual mass rate of 1.62% with a standard deviation of 0.40%. This study demonstrates that electrodynamic systems with zwitterionic SPANI coated on open electrode surfaces can excellently function with decent conductance and anti-biofouling performance.

Poly(3,4-ethylenedioxythiophene) Bearing Pyridylboronic Acid Group for Specific Recognition of Sialic Acid

Conducting polymers tethered with molecular recognition elements are good candidates for biosensing applications such as detecting a target molecule with selectivity. We develop a new monomer, namely, 3,4-ethylenedioxythiophene bearing a pyridylboronic acid moiety (EDOT-PyBA), for label-free detection of sialic acid as a cancer biomarker. PyBA, which is known to show specific binding to sialic acid in acid conditions is used as a synthetic ligand instead of lectins. PyBA confirms the enhanced binding affinity for sialic acid at pH 5.0-6.0 compared with traditional phenylboronic acid. Poly(EDOT-PyBA) is electrodeposited on a planar glassy carbon electrode and the obtained film is successfully characterized by X-ray photoelectron spectroscopy, scanning electron microscopy, atomic force microscopy, water contact angle measurements, and electrochemical impedance spectroscopy. The specific interaction of PyBA with sialic acid at the solution/electrode interface is detected by differential pulse voltammetry in a dynamic range 0.1-3.0 mM with a detection limit of 0.1 mM for a detection time of 3 min. The sensitivity covers the total level of free sialic acid in human serum and the assay time is the shorter than that of other methods. The poly(EDOT-PyBA) electrode successfully detects spiked sialic acid in human serum samples. Owing to its processability, mass productivity, and robustness, polythiophene conjugated with "boronolectin" is a candidate material for developing point-of-care and wearable biosensors.

Synthesis of a conductive polymer thin film having a choline phosphate side group and its bioadhesive properties

A conductive polymer thin film having choline phosphate as the side group was prepared. The polymer thin film can prevent bovine serum albumin binding while present nice fibroblast cell adhesion.

Antifouling strategies in advanced electrochemical sensors and biosensors

A review presented recent development of antifouling strategies in electrochemical sensors and biosensors based on the modification methods.

Probing Surface Hydration and Molecular Structure of Zwitterionic and Polyacrylamide Hydrogels

A hydrogel is a hydrophilic cross-linked polymer network which can contain a large amount of water. Hydrogels with distinguished interfacial physical toughness were analyzed for their potential application as antifouling coating materials, utilizing sum frequency generation (SFG) spectroscopy as the interfacial analytical technique. The surface structures of one sulfobetaine (SBMA) zwitterionic hydrogel (ZWHG) and two polysaccharide hydrogels (PHGs) were probed in air; their interfacial structures with silica were examined using SFG in water and protein solutions, respectively. Both ZWHG and PHGs interfaces in water were dominated by strongly hydrogen-bonded water molecules, but the bonding strength associated with ZWHG was much stronger. Although all hydrogels experienced interfacial change in the presence of protein solutions, after cleaning, the zwitterionic hydrogel interface recovered almost completely while the other two hydrogels were subject to irreversible protein adsorption. Additionally, orientational analysis of ZWHG methyl groups in water was conducted and related to the superior hydrogen-bonding strength of water molecules at the ZWHG interface. The interfacial structures of hydrogel materials probed by SFG can be correlated to their antifouling properties. This research highlighted the critical role that hydrogen-bonding strength of interfacial water molecules play for antifouling applications.

Engineering Antifouling Conducting Polymers for Modern Biomedical Applications

Conducting polymers are considered to be favorable electrode materials for implanted biosensors and bioelectronics, because their mechanical properties are similar to those of biological tissues such as nerve and brain tissues. However, one of the primary challenges for implanted devices is to prevent the unwanted protein adhesion or cell binding within biological fluids. The nonspecific adsorption generally causes the malfunction of implanted devices, which is problematic for long-term applications. When responding to the requirements of solving the problems caused by nonspecific adsorption, an increasing number of studies on antifouling conducting polymers has been recently published. In this review, synthetic strategies for preparing antifouling conducting polymers, including direct synthesis of functional monomers and post-functionalization, are introduced. The applications of antifouling conducting polymers in modern biomedical applications are particularly highlighted. This paper presents focuses on the features of antifouling conducting polymers and the challenges of modern biomedical applications.