Advances and Opportunities of Oil-in-Oil Emulsions

Polymer Single-Chain Nanoparticles: Shaping Solid Surfactants

Polymer single-chain nanoparticles (SCNPs) have found a wide range of applications spanning catalysts, sensors and nanomedicine. The generation of structured SCNPs from star-shaped polymers with diverse architectures and functionalities affords a new avenue to expand the emerging research area. The large-scale synthesis of structured SCNPs is described by the electrostatics-mediated intramolecular crosslinking of three types of 3-armed star-shaped polymers (T-P4VP, T-PS-b-P4VP, and T-P4VP-b-PS), whose configuration is tunable from spherical to cage-shaped to dumbbell-shaped and star-shaped. The structured SCNPs are amphiphilic and can be used as solid surfactants to stabilize different types of emulsions.

Facile Preparation of Silica/Tannic Acid/Zein Microcapsules Templated from Non-Aqueous Pickering Emulsions and their Application in Cargo Protection

Microcapsules have attracted significant attention in academia and industry due to their unique properties for protecting and controlling the release of active substances. However, based on water-insoluble biopolymers, developing a straightforward approach to prepare microcapsules with improved biocompatibility and functional shells remains a great challenge. In this study, zein, a water-insoluble protein, is employed to prepare robust microcapsules facilely using oil-in-aqueous ethanol Pickering emulsions as templates. First, the emulsion template is stabilized by hydrophobic silica nanoparticles with in situ surface modification of tannic acid. The zein is then precipitated at the interface in a controlled manner using antisolvent approach to obtain silica/tannic acid/zein (STZ) microcapsules. It is found that the concentration of zein and the presence of tannic acid played a significant role in the formation of STZ microcapsules with well-defined morphology and a robust shell. The uniform deposition of zein on the surface of template droplets is facilitated by the interactions between tannic acid and zein via hydrogen bond and electrostatic force. Finally, the resulting STZ microcapsules showed super resistance to ultraviolet (UV) radiation and high temperature for the unstable, lipophilic, and active substance of β-carotene.

Different interfaces for stabilizing liquid-liquid, liquid-gel and gel-gel emulsions: Design, comparison, and challenges

Interfaces play essential roles in the stability and functions of emulsion systems. The quick development of novel emulsion systems (e.g., water-water emulsions, water-oleogel emulsions, hydrogel-oleogel emulsions) has brought great progress in interfacial engineering. These new interfaces, which are different from the traditional water-oil interfaces, and are also different from each other, have widened the applications of food emulsions, and also brought in challenges to stabilize the emulsions. We presented a comprehensive summary of various structured interfaces (stabilized by mixed-layers, multilayers, particles, nanodroplets, microgels etc.), and their characteristics, and designing strategies. We also discussed the applicability of these interfaces in stabilizing liquid-liquid (water-oil, water-water, oil-oil, alcohol-oil, etc.), liquid-gel, and gel-gel emulsion systems. Challenges and future research aspects were also proposed regarding interfacial engineering for different emulsions. Emulsions are interface-dominated materials, and the interfaces have dynamic natures, as the compositions and structures are not constant. Biopolymers, particles, nanodroplets, and microgels differed in their capacity to get absorbed onto the interface, to adjust their structures at the interface, to lower interfacial tension, and to stabilize different emulsions. The interactions between the interface and the bulk phases not only affected the properties of the interface, but also the two phases, leading to different functions of the emulsions. These structured interfaces have been used individually or cooperatively to achieve effective stabilization or better applications of different emulsion systems. However, dynamic changes of the interface during digestion are only poorly understood, and it is still challenging to fully characterize the interfaces.

Measuring the Shape, Stiffness, and Interface Tension of Droplets with the Scanning Ion Conductance Microscope

Imaging and probing liquid-liquid interfaces at the micro- and nanoscale are of high relevance, for example, in materials science, surface chemistry, and microfluidics. However, existing imaging techniques are limited in resolution, average over large sample areas, or interact with the sample. Here, we present a method to quantify the shape, stiffness, and interface tension of liquid droplets with the scanning ion conductance microscope (SICM), providing submicrometer resolution and the ability to perform noncontact mechanical measurements. We show that we can accurately image the three-dimensional shape of micrometer-sized liquid droplets made of, for example, decane, hexane, or different oils. We then introduce numerical models to quantitatively obtain their stiffness and interface tension from SICM data. We verified our method by measuring the interface tension of decane droplets changing under the influence of surfactants at different concentrations. Finally, we use SICM to resolve the dissolution dynamics of decane droplets, showing that droplet shape exhibits different dissolution modes and stiffness continuously increases while the interface tension remains constant. We thereby demonstrate that SICM is a useful method to investigate liquid-liquid interfaces on the microscale with applications in materials or life sciences.

Multilevel Information Encryption Based on Thermochromic Perovskite Microcapsules via Orthogonal Photic and Thermal Stimuli Responses

Increasing modal variations of stimulus-responsive materials ensure the high capacity and confidentiality of information storage and encryption systems that are crucial to information security. Herein, thermochromic perovskite microcapsules (TPMs) with dual-variable and quadruple-modal reversible properties are designed and prepared on the original oil-in-fluorine (O/F) emulsion system. The TPMs respond to the orthogonal variations of external UV and thermal stimuli in four reversible switchable modes and exhibit excellent thermal, air, and water stability due to the protection of perovskites by the core-shell structure. Benefiting from the high-density information storage TPMs, multiple information encryptions and decryptions are demonstrated. Moreover, a set of devices are assembled for a multilevel information encryption system. By taking advantage of TPMs as a "private key" for decryption, the signal can be identified as the corresponding binary ASCII code and converted to the real message. The results demonstrate a breakthrough in high-density information storage materials as well as a multilevel information encryption system based on switchable quadruple-modal TPMs.

Unique Crystallization Characteristics of Pickering High Internal Phase Emulsion Templated Porous Constructs

To study the crystallization behavior of polymeric chains under the influence of porosity, the thermal properties of various nonporous and porous poly(ε-caprolactone) (PCL) based constructs were investigated. Porous cross-linked PCL nanocomposite constructs were fabricated utilizing in situ polymerization of CL-based surfactant-free Pickering high internal phase emulsions (HIPEs), stabilized using modified fumed silica nanoparticles (mSiNP) at a minimal concentration of 0.6 wt %. The corresponding nanocomposite constructs exhibited polyhedral pore morphology with significant pore roughness due to the presence of mSiNP. DSC thermograms of nonporous constructs illustrated diminished crystallization temperature and kinetics upon cross-linking and inclusion of mSiNP which confirmed suppressed mobility of polymer chains. Further introduction of porosity led to substantial supercooling, resulting in crystallization temperatures as low as -24 °C. Changes in the crystal structure of various nonporous and porous constructs were also studied using XRD. The crystallization behavior of porous constructs was finally evaluated using Jeziorny, Ozawa, and Mo theories under nonisothermal conditions. Significant deviation from the theoretical model, as observed in the case of porous constructs, implied a complex crystallization mechanism that eventually was not only controlled by the chain immobility due to cross-linking but also heterogeneity present in the wall thickness of the constructs. The unique melting-crystallization phenomenon observed in such constructs may further be expanded to other systems of high heat capacity for utilization as energy storage materials.

Characteristics of Oil-in-Oil Emulsions under AC Electric Fields

Emulsions have been applied in a number of industries such as pharmaceutics, cosmetics, and food, which are also of great scientific interest. Although aqueous emulsions are commonly used in our daily life, oil-in-oil (o/o) emulsions also play an irreplaceable role in view of their unique physics and complementary applications. In this paper, we investigate typical behaviors of organic droplets surrounded by organic medium (o/o emulsions) with different functional groups controlled by the AC electric field. Droplet behaviors can be catalogued into five types: namely, "no effect", "movement", "deformation", "interface rupture", and "disorder". We identify the key dimensionless number Wee·Ca, combined with the channel geometry, for characterizing the typical behaviors in silicon oil/1,6-hexanediol diacrylate and mineral oil/1,6-hexanediol diacrylate emulsions. Unlike aqueous emulsion, the Maxwell-Wagner relaxation inhibits the electric effect and leads to an effective frequency, ranging from 0.5 to 3 kHz. The increasing viscosity of the droplet facilitates the escalation by promoting the shearing effect under the same flow conditions. Ethylene glycol droplets primarily show the efficient coalescence even at a low Wee·Ca, which is attributed to the attraction of free charges induced by the increasing conductivity. In 1,6-hexanediol diacrylate/silicon oil emulsion, the droplet tends to form a liquid film that expands into the entire channel due to the affinity of the droplet to the channel wall. A variety of elongated columns are observed to oscillate between the electrodes at high voltages. These findings can contribute to understanding the electrohydrodynamic physics in o/o emulsion and controlling droplet behaviors in a fast response, programmable, and high-throughput way. We expect that this droplet manipulation technology can be widely adopted in a broad range of chemical synthesis and biological and material science.

Interfacial Activity of Janus Particle: Unity of Molecular Surfactant and Homogeneous Particle

Janus particles with different compositions and properties segmented to different regions on the surface of one objector provide more opportunities for interfacial engineering. As a novel interfacial active material, Janus particles integrate the amphiphilic properties of molecular surfactants and the Pickering effect of homogeneous particles. In this research, the outstanding properties of Janus particles on various interfaces are examined from both theoretical and practical perspectives, and the advantages of Janus particles over molecular surfactants and homogeneous particle surfactants are analyzed. We believe that Janus particles are ideal tools for interface regulation and functionalization in the future.

Recent Progress of Droplet Microfluidic Emulsification Based Synthesis of Functional Microparticles

The remarkable control function over the functional material formation process enabled by droplet microfluidic emulsification approaches can lead to the efficient and one-step encapsulation of active substances in microparticles, with the microparticle characteristics well regulated. In comparison to the conventional fabrication methods, droplet microfluidic technology can not only construct microparticles with various shapes, but also provide excellent templates, which enrich and expand the application fields of microparticles. For instance, intersection with disciplines in pharmacy, life sciences, and others, modifying the structure of microspheres and appending functional materials can be completed in the preparation of microparticles. The as-prepared polymer particles have great potential in a wide range of applications for chemical analysis, heavy metal adsorption, and detection. This review systematically introduces the devices and basic principles of particle preparation using droplet microfluidic technology and discusses the research of functional microparticle formation with high monodispersity, involving a plethora of types including spherical, nonspherical, and Janus type, as well as core-shell, hole-shell, and controllable multicompartment particles. Moreover, this review paper also exhibits a critical analysis of the current status and existing challenges, and outlook of the future development in the emerging fields has been discussed.

All-oil Constructs Stabilized by Cellulose Nanocrystal Surfactants

Constructing all-oil systems with desired geometries and responsiveness would produce a new class of reconfigurable materials that can be used for applications that are not compatible with water or aqueous systems, a fascinating goal to achieve but severely limited by the lack of surfactants. Here, we demonstrate an efficient strategy to stabilize oil-oil interfaces by using the co-assembly between the cellulose nanocrystal and amine-functionalized polyhedral oligomeric silsesquioxane (POSS-NH₂). Cellulose nanocrystal surfactants (CNCSs) form and assemble in situ at the interface, showing significantly enhanced binding energy and acid-dependent interfacial activity. When CNCSs jam at the interface, a robust assembly with exceptional mechanical properties can be achieved, allowing the 3D printing of all-oil devices on demand. Using CNCSs as emulsifiers, oil-in-oil high internal phase emulsions can be prepared by one-step homogenization and, when used as templates, porous materials that require water-sensitive monomers can be synthesized. These results open a new platform for stabilizing and structuring all-oil systems, providing numerous applications for microreactors, encapsulation, delivery, and tissue engineering scaffolds.

Microencapsulation of Lead-Halide Perovskites in an Oil-in-Fluorine Emulsion for Cell Imaging

The superior optical properties of lead-halide perovskites (LHPs) inspired significant research in cell imaging applications; many encapsulating processes have improved perovskite stabilities with comparable biosafety. Herein, facile solvent evaporation encapsulation based on an oil-in-fluorine emulsion for aqueous-stable and extremely nontoxic LHP microcapsules is described. Perfluorooctane dispersed the emulsifier fluorocarbon surfactant to form a continuous fluorine phase, while LHPs and polymethylmethacrylate (PMMA) were dispersed in 1,2-dichloroethane, then emulsified in the fluorine phase to form an oil-in-fluorine emulsion. CsPbBr₃ microcapsules with a dense PMMA shell that protect fragile CsPbBr₃ from the external environment and inhibit lead ion release were obtained after solvent evaporation. The CsPbBr₃ microcapsules not only retained 91% of fluorescence intensity after exposure to water for 30 d but also possess extremely low cytotoxicity for MCF-7 cells. After exposure to 2 mg/mL of CsPbBr₃ microcapsules for 48 h, the cell viability remained >90%. The intracellular uptake of CsPbBr₃ microcapsules indicates its potential use in cell imaging.

Fabrication porous adsorbents templated from aqueous foams using astragalus membranaceus and attapulgite as stabilizer for efficient removal of cationic dyes

The water-based foam stabilized by the natural surfactant applied in the fabrication of porous materials has attracted extensive attention, as the advantages of cleanness, convenience and low cost. Particularly, the development of a green preparation method has became the main research focus and frontier. In this work, a green liquid foam with high stability was prepared by synergistic stabilization of natural plant astragalus membranaceus (AMS) and attapulgite (APT), and then a novel porous material with sufficient hierarchical pore structure was templated from the foam via a simple free radical polymerization of acrylamide (AM). The characterization results revealed that the amphiphilic molecules from AMS adsorbed onto the water-air interface and formed a protective shell to prevent the bubble breakup, and APT gathered in the plateau border and formed a three-dimensional network structure, which greatly slowed down the drainage rate. The porous material polyacrylamide/astragalus membranaceus/attapulgite (PAM/AMS/APT) showed the excellent adsorption performance for cationic dyes of Methyl Violet (MV) and Methylene Blue (MB) in water, and the maximum adsorption capacity could reach to 709.13 and 703.30 mg/g, respectively. Furthermore, the polymer material enabled to regenerate and cycle via a convenient calcination process, and the adsorption capacity was still higher than 200 mg/g after five cycles. In short, this research provided a new idea for the green preparation of porous materials and the treatment of water pollution.

Surface Wettability-Switchable Janus Fiber Fragments Stabilize Pickering Emulsions for Effective Oil/Water Separation

Pickering emulsions indicate stronger resistance against droplet coalescence than the surfactant-stabilized emulsions. To resemble the surfactant amphiphilicity, Janus fiber fragments (JFs) were herein prepared through side-by-side electrospinning of poly(styrene-maleic anhydride) (PSMA) derivatives and cryosection of the aligned fibers, followed by conjugation of hydrophobic cetylamine (C₁₆) and hydrophilic poly(N-isopropylacrylamide) (PNIPAm) ligands on the separate sides. Orthogonal analysis table L₂₅(5⁶) was designed to examine the effect of process parameters on the emulsification efficiency and stability index of Pickering emulsions. The emulsification efficiency is dominated by the JF concentration and length, while the emulsion stability could be prolonged through adjusting the JF concentration and hydrophilic graft density. JF-stabilized emulsions exhibit a much higher stability index (96.4%) than that of Janus microparticle counterparts (37.7%). Though there is no apparent effect on the surface wettability, JFs with PNIPAm grafts of about 2200 Da achieve the most stable Pickering emulsions. Superparamagnetic Fe₃O₄ nanoparticles are inoculated into JFs to collect emulsion droplets under a magnetic field, and the emulsions could be demulsified at an elevated temperature to harvest oil. Meanwhile, the recovered JF emulsifiers could be repeatedly used without loss of the emulsification efficiency. Thus, this study demonstrates surface-switchable JFs to be effective stabilizers of Pickering emulsions and readily recycled for oil harvesting from wastewater.

Unconventional and conventional Pickering emulsions: Perspectives and challenges in skin applications

Pickering emulsions are free from molecular and classical surfactants and are stabilized by solid particles, creating long-term stability against emulsion coalescence. Additionally, these emulsions are both environmentally and skin-friendly, creating new and unexplored sensorial perceptions. Although the literature mostly describes conventional emulsions (oil-in-water), there are unconventional emulsions (multiple, oil-in-oil and water-in-water) with excellent prospects and challenges in skin application as oil-free systems, permeation enhancers and topical drug delivery agents, with various possibilities in pharmaceutical and cosmetic products. However, up to now, these conventional and unconventional Pickering emulsions are not yet available as commercial products. This review brings to the discussion some important aspects such as the use of phases, particles, rheological and sensorial perception, as well as current trends in the development of these emulsions.

Transformation of Hydrophilic Drug into Oil-Miscible Ionic Liquids for Transdermal Drug Delivery

The transdermal delivery of hydrophilic drugs remains challenging owing to their poor ability to permeate the skin; formulation with oil media is difficult without adding chemical permeation enhancers or co-solvents. Herein, we synthesized 12 oil-miscible ionic liquid (IL) drugs comprising lidocaine-, imipramine-, and levamisole (Lev)-hydrochloride with fatty acid permeation enhancers, i.e., laurate, oleate, linoleate, and stearate as counterions. A set of in vitro and in vivo studies was performed to investigate the potency and deliverability of the transdermal drug formulations. All of the synthesized compounds were freely miscible with pharmaceutically acceptable solvents/agents (i.e., ethanol, N-methyl pyrrolidone, Tween 20, and isopropyl myristate (IPM)). In vitro permeation studies revealed that the oleate-based Lev formulation had 2.6-fold higher skin permeation capability than the Lev salts and also superior ability compared with the laurate-, linoleate-, and stearate-containing samples. Upon in vivo transdermal administration to mice, the peak plasma concentration, elimination half-life, and area under the plasma concentration curve values of Lev-IL were 4.6-, 2.9-, and 5.4-fold higher, respectively, than those of the Lev salt. Furthermore, in vitro skin irritation and in vivo histological studies have demonstrated that Lev-IL has excellent biocompatibility compared with a conventional ionic liquid-based carrier. The results indicate that oil-miscible IL-based drugs provide a simple and scalable strategy for the design of effective transdermal drug delivery systems.

Stable O/W emulsions and oleogels with amphiphilic konjac glucomannan network: preparation, characterization, and application

BACKGROUND

The stabilization of oil-in-water (O/W) emulsions has long been explored. Assembly of polymer networks is an effective method for stabilizing O/W emulsions. Konjac glucomannan (KGM) is a plant polysaccharide and the network of KGM gel is a good candidate for stabilizing O/W emulsions based on its high viscosity and thickening properties. However, natural KGM has strong hydrophilicity and is not able to offer interfacial activity. Octenyl succinic anhydride (OSA) is a hydrophobic molecule, which is widely used as thickener and stabilizer in food emulsions. In this work, the amphiphilic biopolymer (OSA-KGM) was fabricated by modifying the KGM with OSA. Furthermore, OSA-KGM biopolymer was used to prepare O/W emulsions, which were then freeze-dried and used to prepare oleogels as fat substitute for bakery products.

RESULTS

OSA-KGM had advanced hydrophobicity with water contact angle 81.13° and adsorption behavior at the oil-water interface, with interfacial tension decreasing from 18.52 to 13.57 mN m^-1 within 1 h. The emulsification of OSA-KGM remarkably improved the stability of emulsions without phase separation during storage for 31 days. Oleogels with OSA-KGM showed good thixotropic and structure recovery properties (approximately 100%) and low oil loss (from 69.5% to 50.4%). Cakes made from oleogels had a softer texture than cakes made from peanut oil and margarine.

CONCLUSION

Amphiphilic biopolymer OSA-KGM shows advanced interfacial activity and hydrophobicity. This paper provides an insight into preparing stable O/W emulsions with a new biopolymer and oleogels potentially applied as fat substitute in bakery products. © 2022 Society of Chemical Industry.

Droplet Navigation by Photothermal Pumping in an Optofluidic System

Droplets with guided motion have potential applications as microreactors and delivery vehicles. Directing long-range migration powered solely by light is particularly advantageous since light can be applied remotely, patterned with a photomask, and readily translated to irradiate specified locations. Herein, we describe a universal platform that allows fast directional navigation and collective merging of droplets controlled by either ultraviolet or visible light. The guided motion of water and oil droplets follows density-driven convective flows arising from photothermal conversion at a light-absorbing amphiphobic substrate. Because of the relatively high photothermal efficiency, a low-intensity light beam can be employed. Further, we demonstrate that the moving droplets can function as carriers and on-demand reaction chambers.

Formation of n-Hexane-in-DMF Nonaqueous Pickering Emulsions: ABC Triblock Worms versus AB Diblock Worms

Nonaqueous Pickering emulsions exhibit promising applications in many industrial areas but have been relatively less studied in the past. In this study, n-hexane-in-DMF nonaqueous Pickering emulsions stabilized by core cross-linked copolymer worms with mixed shells are demonstrated for the first time. Core cross-linked copolymer worms with mixed shells were prepared by seeded reversible addition-fragmentation chain transfer (RAFT) quasi-solution polymerization. Specifically, polystyrene-poly(4-vinylpyridine) (PS-P4VP) diblock copolymer worms were first prepared via RAFT-mediated dispersion polymerization in toluene under the given conditions using PS as both the macro-CTA and the stabilizer block. After the chemical cross-linking of P4VP cores, PS-P4VP diblock copolymer worms were chain-extended with LMA in DMF/toluene (1:9, weight ratio) mixed solvents, producing core cross-linked PS-P4VP-PLMA worms with PS/PLMA mixed shells. The as-prepared core cross-linked PS-P4VP-PLMA worms with mixed PS/PLMA shells were further utilized as Pickering emulsifiers for the generation of nonaqueous n-hexane-in-DMF Pickering emulsions. The emulsifying performances of mixed-shell copolymer worms were compared with those of their spherical and linear analogues with entirely identical chemical compositions as well as PS-P4VP diblock copolymer worm precursors, respectively.

Preparation and oil absorption performance of ATP/P(MMA-BMA-St)/Fe

In this paper, oil-in-water-in-oil (O/W/O) double Pickering emulsions were prepared by purified and modified attapulgite (ATP), and modified nano-Fe3O4 as stable particles. By using the Pickering emulsion as a template and using methyl methacrylate (MMA), butyl methacrylate ester (BMA) and styrene (St) as monomers, ATP/P(MMA-BMA-St)/Fe3O4 composite porous resins were then prepared. The oil absorption performance of the composites was investigated. The results showed that the composite materials prepared by the double Pickering emulsion template method exhibited a three-dimensional (3D) porous structure. When using the optimal conditions (mMMA:mBMA = 3:2, m(MMA+BMA):mSt = 1:2, initiator = 5.33%, crosslinking agent = 20%, modified attapulgite = 0.33% and oil phase/water phase = 1:4), the prepared porous material had the best oil absorption performance, resulting in a diesel oil absorption rate and oil retention rate of 897.29 and 84.76% respectively. This study provides a simple, economic and environmentally friendly method for the preparation of inorganic–organic composite porous materials, which has great application potential in the field of oil treatment.

Nonaqueous Emulsion Polycondensation Enabled by a Self-Assembled Cage-like Surfactant

Nonaqueous emulsions are crucial for a range of applications based on water-sensitive systems such as controlled polymerizations requiring anhydrous reaction conditions and the stabilization of readily hydrolyzable reagents or pharmacologically active components. However, defined molecular surfactants to stabilize such nonaqueous emulsions are scarce. We introduce a self-assembled coordination cage, decorated with cholesterol functionalities, to serve as a molecular surfactant for various oil-in-oil emulsions of immiscible organic solvents. While the positively charged cage forms the amphiphile's polar moiety, the non-polar cholesterol appendices can bend in a common direction to stabilize the emulsion. Templated by the droplets, polycondensation reactions were carried out to produce microstructured polyurethane and polyurea materials of different particle sizes and morphologies. Further, the amphiphilic cage can encapsulate a guest molecule and the resulting host-guest assembly was also examined as a surfactant. In addition, the aggregation behavior of the amphiphilic cage in an aqueous medium was examined.

Crescent-shaped micromotor sorbents with sulfonic acid functionalized convex surface: The synthesis by A Janus emulsion strategy and adsorption for Li. JOURNAL OF HAZARDOUS MATERIALS 2022;422:126870. [PMID: 34425430 DOI: 10.1016/j.jhazmat.2021.126870]

Self-propelled micromotor (SPM) plays a vital role in recycling of lithium (Li⁺) from wastewater in battery industry. In this work, a crescent-shaped micromotor sorbent (CSMSs) with sulfonic group on convex surface was prepared by Janus emulsion to extract Li⁺. Using sodium p-styrene sulfonate as a functional monomer, well-designed CSMSs was prepared by UV-induced monomer interfacial polymerization, and their pit size can be controlled by adjusting the ratio of two incompatible oils (ethoxylated trimethylolpropane triacrylate and liquid paraffin). In addition, MnO₂ nanoparticles, which embedded into concave interface, generated O₂ bubbles in the presence of H₂O₂, and constant circular or line motion of CSMSs was observed. Zeta potential of CSMSs was -51.66 eV at pH = 10, and strong electrostatic attraction between sulfonate groups and Li⁺ endowed the maximum monolayer adsorption capacity of 31 mg g^-1 at 25 °C. Self-propelled effect further enhanced kinetic performance for Li⁺, and equilibrium time can be reduced from original 10-6.0 h, suggesting autonomous movement achieves rapid mixing and mass transportation. After three adsorption/desorption cycles, the adsorption capacity of the material remains above 90%. This simple and large-scale preparation strategy provided a synthetic method for functional and Janus SPM, as well as sorbents for Li⁺ enrichment.

Synthesis, Hydrophilicity and Micellization of Coil-Brush Polystyrene-b-(polyglycidol-g-polyglycidol) Copolymer-Comparison with Linear Polystyrene-b-polyglycidol

In this paper, an original method of synthesis of Coil-Brush amphiphilic polystyrene-b-(polyglycidol-g-polyglycidol) (PS-b-(PGL-g-PGL)) block copolymers was developed. The hypothesis that their hydrophilicity and micellization can be controlled by polyglycidol blocks architecture was verified. The research enabled comparison of behavior in water of PS-b-PGL copolymers and block-brush copolymers PS-b-(PGL-g-PGL) with similar composition. The Coil-Brush copolymers were composed of PS-b-PGL linear core with average DPn of polystyrene 29 and 13 of polyglycidol blocks. The DPn of polyglycidol side blocks of coil-b-brush copolymers were 2, 7, and 11, respectively. The copolymers were characterized by 1H and 13C NMR, GPC, and FTIR methods. The hydrophilicity of films from the linear and Coil-Brush copolymers was determined by water contact angle measurements in static conditions. The behavior of Coil-Brush copolymers in water and their critical micellization concentration (CMC) were determined by UV-VIS using 1,6-diphenylhexa-1,3,5-trien (DPH) as marker and by DLS. The CMC values for brush copolymers were much higher than for linear species with similar PGL content. The results of the copolymer film wettability and the copolymer self-assembly studies were related to fraction of hydrophilic polyglycidol. The CMC for both types of polymers increased exponentially with increasing content of polyglycidol.

Tailor-made urethane-linked alkyl-celluloses: A Promising Stabilizer for Oil-in-oil Pickering Emulsions

Oil-in-oil emulsions or nonaqueous emulsions are formulated from two immiscible organic solvents, which provide an ideal platform for water-sensitive systems such as readily hydrolyzable reagents and polymerization in anhydrous conditions....

Intrinsic Green Fluorescent Cross-Linked Poly(ester amide)s by Spontaneous Zwitterionic Copolymerization

The spontaneous zwitterionic copolymerization (SZWIP) of 2-oxazolines and acrylic acid affords biocompatible but low molecular weight linear N-acylated poly(amino ester)s (NPAEs). Here, we present a facile one-step approach to prepare functional higher molar mass cross-linked NPAEs using 2,2'-bis(2-oxazoline)s (BOx). In the absence of solvent, insoluble free-standing gels were formed from BOx with different length n-alkyl bridging units, which when butylene-bridged BOx was used possessed an inherent green fluorescence, a behavior not previously observed for 2-oxazoline-based polymeric materials. We propose that this surprising polymerization-induced emission can be classified as nontraditional intrinsic luminescence. Solution phase and oil-in-oil emulsion approaches were investigated as means to prepare solution processable fluorescent NPAEs, with both resulting in water dispersible network polymers. The emulsion-derived system was investigated further, revealing pH-responsive intensity of emission and excellent photostability. Residual vinyl groups were shown to be available for modifications without affecting the intrinsic fluorescence. Finally, these systems were shown to be cytocompatible and to function as fluorescent bioimaging agents for in vitro imaging.

Synthesis and Electronic Applications of Particle-Templated Ti3C2Tz MXene-Polymer Films via Pickering Emulsion Polymerization

MXene/polymer composites have gained widespread attention due to their high electrical conductivity and extensive applications, including electromagnetic interference (EMI) shielding, energy storage, and catalysis. However, due to the difficulty of dispersing MXenes in common polymers, the fabrication of MXene/polymer composites with high electrical conductivity and satisfactory EMI shielding properties is challenging, especially at low MXene loadings. Here, we report the fabrication of MXene-armored polymer particles using dispersion polymerization in Pickering emulsions and demonstrate that these composite powders can be used as feedstocks for MXene/polymer composite films with excellent EMI shielding performance. Ti₃C₂T_z nanosheets are used as the representative MXene, and three different monomers are used to prepare the armored particles. The presence of nanosheets on the particle surface was confirmed by X-ray photoelectron spectroscopy and scanning electron microscopy. Hot pressing the armored particles above T_g of the polymer produced Ti₃C₂T_z/polymer composite films; the films are electrically conductive because of the network of nanosheets templated by the particle feedstocks. For example, the particle-templated Ti₃C₂T_z/polystyrene film had an electrical conductivity of 0.011 S/cm with 1.2 wt % of Ti₃C₂T_z, which resulted in a high radio frequency heating rate of 13-15 °C/s in the range of 135-150 MHz and an EMI shielding effectiveness of ∼21 dB within the X band. This work provides a new approach to fabricate MXene/polymer composite films with a templated electrical network at low MXene loadings.

Highly Porous Poly(arylene cyano-vinylene) Beads Derived through the Knoevenagel Condensation of the Oil-in-Oil-in-Oil Double Emulsion Templates

Conjugated porous polymers through the emulsion-templating polymerization process are typically prepared as monoliths, and the emulsions are cured via metal-catalyzed cross-coupling reactions. Herein, we report the design and synthesis of well-defined, millimeter-sized conjugated porous polymer beads by combining an oil-in-oil-in-oil (O/O/O) double emulsion as a de novo template and an amino-catalyzed Knoevenagel condensation reaction as a polymerization chemistry to cure such emulsions. The 1,4-phenylenediacetonitrile is reacted with aromatic multialdehydes in the presence of piperidine, and a series of metal-free poly(arylene cyano-vinylene) beads are prepared. All beads exhibit 3D-interconnected microcellular morphology and substantial semiconducting properties, such as strong light harvesting ability in the visible light region with electrochemical band gaps in the range of 2.05-2.33 eV. Finally, the promising photocatalytic activity of these conjugated beads is demonstrated for a model sulfoxidation reaction under visible light irradiation, and near quantitative conversions with excellent chemoselectivities (>99%) are obtained.

Preparation of Poly(ethylene glycol)@Polyurea Microcapsules Using Oil/Oil Emulsions and Their Application as Microreactors

The development process of catalytic core/shell microreactors, possessing a poly(ethylene glycol) (PEG) core and a polyurea (PU) shell, by implementing an emulsion-templated non-aqueous encapsulation method, is presented. The microreactors' fabrication process begins with an emulsification process utilizing an oil-in-oil (o/o) emulsion of PEG-in-heptane, stabilized by a polymeric surfactant. Next, a reaction between a poly(ethylene imine) (PEI) and a toluene-2,4-diisocyanate (TDI) takes place at the boundary of the emulsion droplets, resulting in the creation of a PU shell through an interfacial polymerization (IFP) process. The microreactors were loaded with palladium nanoparticles (NPs) and were utilized for the hydrogenation of alkenes and alkynes. Importantly, it was found that PEG has a positive effect on the catalytic performance of the developed microreactors. Interestingly, besides being an efficient green reaction medium, PEG plays two crucial roles: first, it reduces the palladium ions to palladium NPs; thus, it avoids the unnecessary use of additional reducing agents. Second, it stabilizes the palladium NPs and prevents their aggregation, allowing the formation of highly reactive palladium NPs. Strikingly, in one sense, the suggested system affords highly reactive semi-homogeneous catalysis, whereas in another sense, it enables the facile, rapid, and inexpensive recovery of the catalytic microreactor by simple centrifugation. The durable microreactors exhibit excellent activity and were recycled nine times without any loss in their reactivity.

Solid-in-Oil-in-Water Emulsion: An Innovative Paradigm to Improve Drug Stability and Biological Activity

Abstract

An emulsion is a biphasic dosage form comprising of dispersed phase containing droplets that are uniformly distributed into a surrounding liquid which forms the continuous phase. An emulsifier is added at the interface of two immiscible liquids to stabilize the thermodynamically unstable emulsion. Various types of emulsions such as water-in-oil (w-o), oil-in-water (o-w), microemulsions, and multiple emulsions are used for delivering certain drugs in the body. Water (aqueous) phase is commonly used for encapsulating proteins and several other drugs in water-in-oil-in-water (w-o-w) emulsion technique. But this method has posed certain problems such as decreased stability, burst release, and low entrapment efficiency. Thus, a novel “solid-in-oil-in-water” (s-o-w) emulsion system was developed for formulating certain drugs, probiotics, proteins, antibodies, and tannins to overcome these issues. In this method, the active ingredient is encapsulated as a solid and added to an oil phase, which formed a solid-oil dispersion. This dispersion was then mixed with water to form a continuous phase for enhancing the drug absorption. This article focuses on the various studies done to investigate the effectiveness of formulations prepared as solid-oil-water emulsions in comparison to conventional water-oil-water emulsions. A summary of the results obtained in each study is presented in this article. The s-o-w emulsion technique may become beneficial in near future as it has shown to improve the stability and efficacy of the entrapped active ingredient.

Graphical abstract

Stabilizing Triglyceride in Methanol Emulsions via a Magnetic Pickering Interfacial Catalyst for Efficient Transesterification under Static Conditions

Pickering emulsion systems provide potential platforms for simultaneously intensifying and catalyzing transesterification between triglyceride and methanol under static conditions. However, realizing static transesterification with high biodiesel yield is still challenging due to low emulsion stability at the reaction temperature. Here, a series of magnetically recyclable Pickering interfacial catalysts (PICs) with similar surface affinities but different densities were constructed as stabilizers of a soybean oil/methanol emulsion. The variations in the emulsion volume fraction and droplet size were comparatively studied and analyzed from the viewpoint of droplet settling and catalyst particle shedding. It is found that, except for surface affinity, PIC density also plays a pivotal role in emulsion stability owing to the non-negligible effect of gravity on catalyst adsorption in triglyceride/methanol emulsion (especially at elevated temperature). By reducing the density, finely improving the lipophilicity, and optimizing the addition amount of PIC, the obtained soybean oil/methanol emulsion can remain stable for at least 12 h at 60 °C, enabling static transesterification with a high biodiesel yield of 95.6%. Moreover, the best performing PIC can be reused for at least 7 cycles. This efficient static transesterification system offers a green strategy for biodiesel production.

Dynamic Covalent Nanoparticles for Acid-Responsive Nonaqueous Pickering Emulsions

Acid-responsive nonaqueous (glycerol in n-decane) Pickering emulsions were prepared using preferentially oil-wetted dynamic covalent silica (SiO₂-pDB) nanoparticles as the Pickering emulsifiers. The acid-responsive Pickering emulsifier SiO₂-pDB was prepared based on a Schiff base reaction between amino silica (SiO₂-NH₂) and p-decanoxybenzaldehyde (pDBA). The formation of SiO₂-pDB was characterized by Fourier transform infrared spectroscopy, thermogravimetric analysis, and elemental analysis. The preferentially oil-wetted character of SiO₂-pDB was indicated by contact angle measurement. Stable nonaqueous Pickering emulsions were prepared using preferentially oil-wetted SiO₂-pDB as the Pickering emulsifier. However, after adjusting the nonaqueous Pickering emulsions to an acidic environment, complete phase separation occurred. In the acidic environment, preferentially oil-wetted SiO₂-pDB decomposed into hydrophilic SiO₂-NH₂ and hydrophobic pDBA due to the decomposition of the dynamic imine bond in the SiO₂-pDB. Then, the hydrophilic SiO₂-NH₂ and hydrophobic pDBA desorbed from the two-phase interface, resulting in complete phase separation of the initially stable nonaqueous Pickering emulsions. The acid-responsive nonaqueous Pickering emulsions show great potential in application in water sensitive systems, such as oil-based drilling fluids.

Recent advances in the design of microfluidic technologies for the manufacture of drug releasing particles

Drug releasing particles are valued for their ability to deliver therapeutics to targeted locations and for their controllable release patterns. The development of microfluidic technologies, which are designed specifically to manipulate small amounts of fluids, to manufacture particles for drug delivery applications reflects a recent trend due to the advantages they confer in terms of control over particle size and material composition. This review takes a comprehensive look at the different types of microfluidic devices used to fabricate such particles from different types of biomaterials, and at how the on-chip features enable the production of particles with different types of properties. The review concludes by suggesting avenues for future work that will enable these technologies to fulfill their potential and be used in industrial settings for the manufacture of drug releasing particles with unique capabilities.

Synthetic semicrystalline cellulose oligomers as efficient Pickering emulsion stabilizers

Nanocellulose are promising Pickering emulsion stabilizers for being sustainable and non-toxic. In this work, semicrystalline cellulose oligomers (SCCO), which were synthesized from maltodextrin using cellobiose as primer by in vitro enzymatic biosystem, were exploited as stabilizers for oil-in-water Pickering emulsions. At first, the morphology, structure, thermal and rheological properties of SCCO suspensions were characterized, showing that SCCO had a sheet morphology and typical cellulose-Ⅱ structure with 56 % crystallinity. Then the kinetic stabilities of emulsions containing various amounts of SCCO were evaluated against external stress such as pH, ionic strength, and temperature. Noting that SCCO-Pickering emulsions exhibited excellent stabilities against changes in centrifugation, pH, ionic strengths, and temperatures, and it was also kinetically stable for up to 6 months. Both SCCO suspensions and their emulsions exhibited gel-like structures and shear-thinning behaviors. These results demonstrated great potential of SCCO to be applied as nanocellulosic emulsifiers in food, cosmetic and pharmaceutical industries.

The Effect of Particle Shell on Cooling Rates in Oil-in-Oil Magnetic Pickering Emulsions

Pickering emulsions (particle-stabilized emulsions) are usually considered because of their unique properties compared to surfactant-stabilized emulsions including better stability against emulsion aging. However, the interesting feature of particle-stabilized emulsions could be revealed during their magnetic heating. When magnetic particles constitute a shell around droplets and the sample is placed in an alternating magnetic field, a temperature increase appears due to energy dissipation from magnetic relaxation and hysteresis within magnetic particles. We hypothesize that the solidity of the magnetic particle shell around droplets can influence the process of heat transfer from inside the droplet to the surrounding medium. In this way, particle-stabilized emulsions can be considered as materials with changeable heat transfer. We investigated macroscopically heating and cooling of oil-in-oil magnetic Pickering emulsions with merely packed particle layers and these with a stable particle shell. The change in stability of the shell was obtained here by using the coalescence of droplets under the electric field. The results from calorimetric measurements show that the presence of a stable particle shell caused a slower temperature decrease in samples, especially for lower intensities of the magnetic field. The retarded heat transfer from magnetic Pickering droplets can be utilized in further potential applications where delayed heat transfer is desirable.