Photoelectrochemical Sensing of α-Synuclein Based on a AuNPs/Graphdiyne-Modified Electrode Coupled with a Nanoprobe

Polarity-Switchable Dual-Mode Photoelectrochemical Cancer Marker Immunoassay Based on a Metal-Organic Framework@Nitrogen-Doped Graphdiyne Heterojunction

A photocurrent polarity-switching photoelectrochemical (PEC) assay has been used for its anti-interference ability and superior accuracy compared to a conventional PEC measuring system. In this work, an ultrasensitive photocurrent polarity-switchable assay was established for sensitive prostate-specific antigen (PSA) detection based on a novel metal-organic framework (MOF) and graphdiyne@polyaniline (GDY@PANI)-sensitized structure as a photoactive material. The nitrogen-doped carbon nanolayers wrapped around graphdiyne and a zinc-based MOF were synthesized via a hydrothermal method. As an excellent photoactive material, the type II heterostructure (MOF/GDY@PANI) not only reduced the recombination of generated electron-hole pairs but also resulted in a significant increase in photoelectric conversion efficiency. Furthermore, its photocurrent was 4.6-fold higher than that of GDY@PANI and 37-fold higher than the proposed MOF. The integrated MOF/GDY@PANI/antibody (Ab) glassy carbon photoelectrode (GCE) was used as a PEC immunosensor for PSA detection (signal-off mode) and exhibited a wide linear dynamic range from 0.1 fg/mL to 10 pg/mL and a limit of detection of 0.05 fg/mL. The GCE modified with MOF and primary antibody (Ab1) (GCE/MOF/Ab1) produced a cathodic photocurrent, and in the presence of PSA, after the introduction of GDY@PANI-labeled-secondary antibody (Ab2) onto the surface of GCE/MOF/Ab1 and formation of an immunocomplex, the photocurrent amplified and switched to an anodic current. Due to high photoelectric conversion efficiency and good polarity-switching ability of GDY@PANI, the proposed immunosensor presented a turn-on photoelectrochemical performance for PSA detection at a wide linear range from 0.1 to 10 pg/mL and ultralow detection limit of 0.03 fg/mL. Compared to signal-off mode, the sensitivity increased 2-fold and the effect of interferences produces more reliable results due to photocurrent switching, and its effectiveness was evaluated against an enzyme-linked immunosorbent assay (ELISA) using spiked real human serum samples. The positive and promising outcomes achieved by the proposed immunosensor imply that the developed platform has the potential to serve as an excellent enzyme-free photoanode immunosensor for early cancer diagnosis and therapeutic monitoring.

Graphdiyne biomaterials: from characterization to properties and applications

Graphdiyne (GDY), the sole synthetic carbon allotrope with sp-hybridized carbon atoms, has been extensively researched that benefit from its pore structure, fully conjugated surfaces, wide band gaps, and more reactive C≡C bonds. In addition to the intrinsic features of GDY, engineering at the nanoscale, including metal/transition metal ion modification, chemical elemental doping, and other biomolecular modifications, endowed GDY with a broader functionality. This has led to its involvement in biomedical applications, including enzyme catalysis, molecular assays, targeted drug delivery, antitumor, and sensors. These promising research developments have been made possible by the rational design and critical characterization of GDY biomaterials. In contrast to other research areas, GDY biomaterials research has led to the development of characterization techniques and methods with specific patterns and some innovations based on the integration of materials science and biology, which are crucial for the biomedical applications of GDY. The objective of this review is to provide a comprehensive overview of the biomedical applications of GDY and the characterization techniques and methods that are essential in this process. Additionally, a general strategy for the biomedical research of GDY will be proposed, which will be of limited help to researchers in the field of GDY or nanomedicine.

Recent Advances in Electrochemical Biosensors for Neurodegenerative Disease Biomarkers

Neurodegenerative diseases, such as Parkinson's disease (PD) and Alzheimer's disease (AD), represent a growing global health challenge with overlapping biomarkers. Key biomarkers, including α-synucleins, amyloid-β, and Tau proteins, are critical for accurate detection but are often assessed using conventional methods like enzyme-linked immunosorbent assay (ELISA) and polymerase chain reaction (PCR), which are invasive, costly, and time-intensive. Electrochemical biosensors have emerged as promising tools for biomarker detection due to their high sensitivity, rapid response, and potential for miniaturization. The integration of nanomaterials has further enhanced their performance, improving sensitivity, specificity, and practical application. To this end, this review provides a comprehensive overview of recent advances in electrochemical biosensors for detecting neurodegenerative disease biomarkers, highlighting their strengths, limitations, and future opportunities. By addressing the challenges of early diagnosis, this work aims to stimulate interdisciplinary innovation and improve clinical outcomes for neurodegenerative disease patients.

Adapting single-walled carbon nanotube-based thin-film transistors to flexible substrates with electrolyte-gated configurations using a versatile tri-layer polymer dielectric

Flexibility has been a key selling point in the development of carbon-based electronics and sensors with the promise of further development into wearable devices. Semiconducting single-walled carbon nanotubes (SWNTs) lend themselves well to applications requiring flexibility while achieving high-performance. Our previous work has demonstrated a tri-layer polymer dielectric composed of poly(lactic acid) (PLA), poly(vinyl alcohol) with cellulose nanocrystals (PVAc), and toluene diisocyanate-terminated poly(caprolactone) (TPCL), yielding an environmentally benign and solution-processable n-type thin-film transistor (TFT). Despite the potential for fabrication on flexible substrates, these devices were only characterized on rigid substrates. We present herein the fabrication of these TFTs on Kapton® substrates and a progression of the devices' n- and p-type operation over 7 days, demonstrating continuous loss of the n-type performance and relative stability of the p-type performance after 3 days in ambient air. The tri-layer dielectric is then applied in an electrolyte-gated SWNT field-effect transistor (EG-SWNT-FET) architecture, shielding the SWNTs from the electrolyte and allowing for width-normalised g m values of 0.0563 ± 0.0263 μS μm-1 and I ON/OFF ratios of 103-104 using de-ionized (DI) water as the electrolyte. Finally, as a proof of concept, the device was used to detect α-synuclein, a neuronal protein whose aggregation is associated with Parkinson's disease, in DI water through the immobilization of target specific aptamer molecules on the polymer layer covering the gate electrode.

Current trends in blood biomarkers detection and neuroimaging for Parkinson's disease

Parkinson's disease (PD) is a neurodegenerative disorder characterized by both motor and cognitive impairments. A significant challenge in managing PD is the variability of symptoms and disease progression rates. This variability is primarily attributed to unclear biomarkers associated with the disease and the lack of early diagnostic technologies and effective imaging methods. PD-specific biomarkers are essential for developing practical tools that facilitate accurate diagnosis, patient stratification, and monitoring of disease progression. Hence, creating valuable tools for detecting and diagnosing PD based on specific biomarkers is imperative. Blood testing, less invasive than obtaining cerebrospinal fluid through a lumbar puncture, is an ideal source for these biomarkers. Although such biomarkers were previously lacking, recent advancements in various detection techniques related to PD biomarkers and new imaging methods have emerged. However, basic research requires more detailed guidelines on effectively implementing these biomarkers in diagnostic procedures to enhance the diagnostic accuracy of PD blood testing in clinical practice. This review discusses the developmental trends of PD-related blood biomarker detection technologies, including optical analysis platforms. Despite the progress in developing various biomarkers for PD, their specificity and sensitivity remain suboptimal. Therefore, the integration of multimodal biomarkers along with optical and imaging technologies is likely to significantly improve diagnostic accuracy and facilitate the implementation of personalized medicine. This review forms valid research hypotheses for PD research and guides future empirical studies.

Comprehensive and Sensitive Analysis of Total PAEs Using a Label-Free Zero-Voltage Photoelectrochemical Biosensor

The sensing of phthalate esters (PAEs) is vital for people's health and environmental protection. This study aimed to develop a highly sensitive and selective photoelectrochemical (PEC) biosensor for PAEs analysis in complex samples. The biosensor is based on a CdS nanoparticle/TiO2 nanotube (CdS NP/TiO2 NT) electrode substrate and a truncated PAEs aptamer (PAEs-apt). By exploiting spatial variations in the potential resistance of the sensing interface, the biosensor achieved superior sensitivity in determining the concentration of PAEs compared to the SELEX aptamer. It exhibited a linear correlation in the range of 0.005 to 1 ng/mL with a detection limit of 1.67 ng/L. Furthermore, the biosensor displayed excellent selectivity for PAEs, with an analysis error factor below 0.277 when the concentration of interfering species was 100 times that of the target. The high performance of the biosensor was attributed to the excellent photoelectronic properties of CdS NPs/TiO2 NTs, high density of PAEs-apt for PAEs, high affinity of PAEs-apt for PAEs, and specific recognition of PAEs. Notably, this PEC biosensor could be used for the PAEs assay in urine and water samples, providing a sensitive and simple analytical method for detecting the same class of compounds with similar chemical structures in complex samples.

Triple quenching effect of nanozyme catalyzed precipitation combined with enzyme-free amplification for photoelectrochemical biosensing of circulating tumor DNA

In this work, a new photoelectrochemical (PEC) biosensor based on triple quenching effect of nanozyme catalyzed precipitation to PEC signal of MgIn2S4 was constructed for ultrasensitive detection of circulating tumor DNA (ctDNA). Enzyme-free amplification technology was used to convert target ctDNA into a large number of product chains (PC) to improve the detection sensitivity. Co3O4 nanozyme with excellent peroxidase (POD)-like activity was introduced to the surface of MgIn2S4 by PC. Co3O4 could oxidize chromogenic agent 3-Amino-9-ethylcarbazole (AEC) to produce red insoluble precipitation in the presence of H2O2, resulting in the PEC signal "off" of MgIn2S4 to achieve ultrasensitive detection of ctDNA. In particular, Co3O4 nanozyme showed three synergistic quenching effects on PEC signal of MgIn2S4, which contributed greatly to improving the detection sensitivity. Firstly, the light absorption range of Co3O4 could reach 1000 nm, and compete with MgIn2S4 for light absorption. Secondly, the produced red precipitation belonged to the insulating material and had large electrochemical impedance, which hindered the transmission of photogenerated carriers. Thirdly, the precipitation also prevented the electron donor ascorbic acid (AA) from transferring electrons to MgIn2S4. This biosensor provided a promising sensitive PEC detection technology for ctDNA, and further broadened the application of nanozymes in the field of PEC analysis.

Graphdiyne as an emerging sensor platform: Principles, synthesis and application

BACKGROUND

Graphdiyne (GDY) is a kind of carbon material, which has highly delocalized π-conjugated system and feasible green synthesis. Nowadays, the use of GDY substrate as a sensing platform has become a new research hotspot and is rapidly developing. However, its application as a sensor is still relatively overlook compared to other fields.

AIM OF REVIEW

This study is for the purpose of making researchers have a complete comprehensive understanding of GDY and its associated sensing platforms.

KEY SCIENTIFIC CONCEPTS OF REVIEW

This study introduces the structure, unique characteristics, and synthesis progress of GDY material. Moreover, the article systematically summarizes the improvement of GDY-based sensors in life, health and environmental detection. It also discusses the opportunities and challenges of designing high-performance GDY-based sensing platforms with the assistance of machine learning and theoretical calculate. It has essential scientific and practical meaning for accelerating the development of sensing platforms which base on GDY, triggering unknown phenomena and knowledge of material research, and initiating unlimited space for scientific innovation.

Dual-mode electrochemiluminescence sensing and phone imaging assays based on bipolar electrode for kanamycin detection

Excessive use of antibiotics will enter the water environment and soil through the biological chain, and then transfer to the human body through food, resulting in drug resistance, kidney toxicity and other health problems, so it is urgent to develop highly sensitive detection methods of antibiotics. Here, we designed a dual-mode sensor platform based on closed bipolar electrode (cBPE) electroluminescence (ECL) and mobile phone imaging to detect kanamycin in seawater. The prepared CN-NV-550 displayed extremely intense ECL signal, allowing for convenient mobile phone imaging. The cBPE was combined with DNA cycle amplification technology to prevent the mutual interference between target and the luminescent material, and realized the amplification of signal. In the presence of target Kana, Co3O4 was introduced to the cBPE anode by DNA cycle amplification product, and accelerated the oxidation rate of uric acid (UA). Thus, the electroluminescence response of CN-NV-550 on cBPE cathode was much improved due to the charge balance of the cBPE, achieving both ECL detection and mobile phone imaging assay of Kana, which much improved the accuracy and efficiency of assay. The limit of detection (LOD) in this work is 0.23 pM, and LOD for mobile phone imaging is 0.39 pM. This study integrate ECL imaging visualization of CN-NV-550 and high electrocatalytic activity of Co3O4 into cBPE-ECL detection, providing a new perspective for antibiotic analysis, and has great potential for practical applications, especially in Marine environmental pollution monitoring.

An ultrasensitive dual-mode stagey for 17β-estradiol assay: Photoelectrochemical and colorimetric biosensor based on a WSe2/TiO2-modified electrode coupled with nucleic acid amplification

BACKGROUND

The abuse of 17β-estradiol(E2) has aroused wide concern in environmental and biomedical fields, which severely affects the endocrine function of human and animals. Therefore, an ultrasensitive and accurate assay of E2 is critically important. Traditional chromatography or immunoassay techniques exhibited good sensitivity and selectivity, but expensive instruments and antibodies may pose cost and stability issues, as well as difficulties in meeting on-site detection requirements. Ultrasensitive, reliable, and on-site detection of E2 at trace level remains a challenge. Hence, developing a simple, ultrasensitive assay to simultaneously achieve accurate detection and rapid visual analysis of E2 is extremely crucial.

RESULTS

We developed a versatile dual-mode photoelectrochemical (PEC) and colorimetric biosensor based on isothermal nucleic acid amplification strategy for the ultrasensitive and accurate detection of E2. The method modified titanium dioxide (TiO2) with tungsten selenide (WSe2) nanoflowers to synthesize WSe2/TiO2 heterostructures as a substrate for signal amplification and nanoprobe modification. Isothermal nucleic acid amplification strategy has been proven to be a powerful tool for strong signal amplification. The presence of a target triggered the nucleic acid amplification reaction, and produced a large amount of tDNA that competed with G-quadruplex immobilized on the electrode surface. The remaining G-quadruplex/hemin catalyzed the 4-chloro-1-naphthol (4-CN) to form biocatalytic precipitation (BCP) and ABTS-H2O2 chromogenic reaction, thus, the dual-mode platform was capable of achieving PEC-colorimetric ultrasensitive detection based on the catalytic activity of G-quadruplex/hemin DNAzyme. Within optimal conditions, the dual-mode biosensor exhibited a remarkable detection limit as low as 0.026 pM.

SIGNIFICANCE

Benefiting from the superior performance of WSe2/TiO2 and the power signal amplification of isothermal nucleic acid amplification strategy, this aptasensor achieved the ultrasensitive detection of E2. The independent transmission paths of photoelectrochemical and colorimetric provide mutual support and flexible switching, significantly enhancing the overall sensitivity and accuracy of the detection strategy, which can meet the needs for E2 precise quantification and rapid on-site detection.

Carbon-based photoelectrochemical sensors: recent developments and future prospects

Owing to the considerable potential of photoelectrochemical (PEC) sensors, they have gained significant attention in the analysis of biological, environmental, and food markers. However, the limited charge mass transfer efficiency and rapid recombination of electron hole pairs have become obstacles in the development of PEC sensors. In this case, considering the unique advantages of carbon-based materials, they can be used as photosensitizers, supporting materials and conductive substrates and coupled with semiconductors to prepare composite materials, solving the above problems. In addition, there are many types of carbon materials, which can have semiconductor properties and form heterojunctions after coupling with semiconductors, effectively promoting the separation of electron hole pairs. Herein, we aimed to provide a comprehensive analysis of reports on carbon-based PEC sensors by introducing their research and application status and discussing future development trends in this field. In particular, the types and performance improvement strategies of carbon-based electrodes and the working principles of carbon-based PEC sensors are explained. Furthermore, the applications of carbon-based photoelectric sensors in environmental monitoring, biomedicine, and food detection are highlighted. Finally, the current limitations in the research on carbon-based PEC sensors are emphasized and the need to enhance the sensitivity and selectivity through material modification, structural design, improved device performance, and other strategies are emphasized.

Impacts of polyethylene glycol (PEG) dispersity on protein adsorption, pharmacokinetics, and biodistribution of PEGylated gold nanoparticles

PEGylated gold nanoparticles (PEG-AuNPs) are widely used in drug delivery, imaging and diagnostics, therapeutics, and biosensing. However, the effect of PEG dispersity on the molecular weight (M W) distribution of PEG grafted onto AuNP surfaces has been rarely reported. This study investigates the effect of PEG dispersity on the M W distribution of PEG grafted onto AuNP surfaces and its subsequent impact on protein adsorption and pharmacokinetics, by modifying AuNPs with monodisperse PEG methyl ether thiols (mPEG n -HS, n = 36, 45) and traditional polydisperse mPEG2k-SH (M W = 1900). Polydisperse PEG-AuNPs favor the enrichment of lower M W PEG fractions on their surface due to the steric hindrance effect, which leads to increased protein adsorption. In contrast, monodisperse PEG-AuNPs have a uniform length of PEG outlayer, exhibiting markedly lower yet constant protein adsorption. Pharmacokinetics analysis in tumor-bearing mice demonstrated that monodisperse PEG-AuNPs possess a significantly prolonged blood circulation half-life and enhanced tumor accumulation compared with their polydisperse counterpart. These findings underscore the critical, yet often underestimated, impacts of PEG dispersity on the in vitro and in vivo behavior of PEG-AuNPs, highlighting the role of monodisperse PEG in enhancing therapeutic nanoparticle performance.

Tau- and α-synuclein-targeted gold nanoparticles: applications, opportunities, and future outlooks in the diagnosis and therapy of neurodegenerative diseases

The use of nanomaterials in medicine offers multiple opportunities to address neurodegenerative disorders such as Alzheimer's and Parkinson's disease. These diseases are a significant burden for society and the health system, affecting millions of people worldwide without sensitive and selective diagnostic methodologies or effective treatments to stop their progression. In this sense, the use of gold nanoparticles is a promising tool due to their unique properties at the nanometric level. They can be functionalized with specific molecules to selectively target pathological proteins such as Tau and α-synuclein for Alzheimer's and Parkinson's disease, respectively. Additionally, these proteins are used as diagnostic biomarkers, wherein gold nanoparticles play a key role in enhancing their signal, even at the low concentrations present in biological samples such as blood or cerebrospinal fluid, thus enabling an early and accurate diagnosis. On the other hand, gold nanoparticles act as drug delivery platforms, bringing therapeutic agents directly into the brain, improving treatment efficiency and precision, and reducing side effects in healthy tissues. However, despite the exciting potential of gold nanoparticles, it is crucial to address the challenges and issues associated with their use in the medical field before they can be widely applied in clinical settings. It is critical to ensure the safety and biocompatibility of these nanomaterials in the context of the central nervous system. Therefore, rigorous preclinical and clinical studies are needed to assess the efficacy and feasibility of these strategies in patients. Since there is scarce and sometimes contradictory literature about their use in this context, the main aim of this review is to discuss and analyze the current state-of-the-art of gold nanoparticles in relation to delivery, diagnosis, and therapy for Alzheimer's and Parkinson's disease, as well as recent research about their use in preclinical, clinical, and emerging research areas.

Novel portable photoelectrochemical sensor based on CdS/Au/TiO2 nanotube arrays for sensitive, non-invasive, and instantaneous uric acid detection in saliva

Uric acid (UA) monitoring is the most effective method for diagnosis and treatment of gout, hyperuricemia, hypertension, and other diseases. However, challenges remain regarding detection efficiency and rapid on-site detection. Here, we first synthesized a CdS/Au/TiO2-NTAs Z-scheme heterojunction material using a titanium dioxide nanotube array (TiO2-NTAs) as the substrate and modified with gold nanoparticles (Au) and cadmium sulfide particles (CdS). This material achieves bandgap alignment to generate a large number of electron-hole pairs under illumination. Then, using CdS/Au/TiO2-NTAs as the working electrode and molecularly imprinted polymers (MIP) as the recognition unit, we constructed a portable photoelectrochemical (PEC) sensor for non-invasive instant detection of UA concentration in human saliva, which has unique advantages in the field of high-sensitivity PEC instant detection. The portable MIP-PEC sensor achieves a linear range of 0.01-50 μM and a detection limit as low as 5.07 nM (S/N = 3). At the same time, the portable MIP-PEC sensor exhibits excellent sensitivity, specificity as well as stability, and shows no statistically significant difference compared to traditional high-performance liquid chromatography (HPLC) in practical sample detection. Compared to traditional PEC modes, this work demonstrates a novel and universal method for high-sensitivity instant detection in the field of PEC.

An innovative method for the detection of alpha synuclein, a potential biomarker of Parkinson's disease: quartz tuning fork-based mass sensitive immunosensor design

An innovative biosensing fabrication strategy has been demonstrated for the first time using a quartz tuning fork (QTF) to develop a practical immunosensor for sensitive, selective and practical analysis of alpha synuclein protein (SYN alpha), a potential biomarker of Parkinson's disease. Functionalization of gold-coated QTFs was carried out in 2 steps by forming a self-assembled monolayer with 4-aminothiophenol (4-ATP) and conjugation of gold nanoparticles (AuNPs). The selective determination range for SYN alpha of the developed biosensor system is 1-500 ng mL-1 in accordance with the resonance frequency shifts associated with a limit of detection of 0.098 ng mL-1. The changes in surface morphology and elemental composition were evaluated using scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR) and energy-dispersive X-ray spectroscopy (EDX). The remarkable point of the study is that this QTF based mass sensitive biosensor system can capture the SYN alpha target protein in cerebrospinal fluid (CSF) samples with recoveries ranging from 92% to 104%.

Recent Progress in Transition Metal Dichalcogenides for Electrochemical Biomolecular Detection

Advances in the field of nanobiotechnology are largely due to discoveries in the field of materials. Recent developments in the field of electrochemical biosensors based on transition metal nanomaterials as transducer elements have been beneficial as they possess various functionalities that increase surface area and provide well-defined active sites to accommodate elements for rapid detection of biomolecules. In recent years, transition metal dichalcogenides (TMDs) have become the focus of interest in various applications due to their considerable physical, chemical, electronic, and optical properties. It is worth noting that their unique properties can be modulated by defect engineering and morphology control. The resulting multifunctional TMD surfaces have been explored as potential capture probes for the rapid and selective detection of biomolecules. In this review, our primary focus is to delve into the synthesis, properties, design, and development of electrochemical biosensors that are based on transition metal dichalcogenides (TMDs) for the detection of biomolecules. We aim to explore the potential of TMD-based electrochemical biosensors, identify the challenges that need to be overcome, and highlight the opportunities for further future development.

State, synthesis, perspective applications, and challenges of Graphdiyne and its analogues: A review of recent research

Carbon materials technology provides the possibility of synthesizing low-cost, outstanding performance replacements to noble-metal catalysts for long-term use. Graphdiyne (GDY) is a carbon allotrope with an extremely thin atomic thickness. It consists of carbon elements, that are hybridized with both sp. and sp2, resulting in a multilayered two-dimensional (2D) configuration. Several functional models suggest, that GDY contains spontaneously existing band structure with Dirac poles. This is due to the non-uniform interaction among carbon atoms, which results from various fusions and overlapping of the 2pz subshell. Unlike other carbon allotropes, GDY has Dirac cone arrangements, that in turn give it inimitable physiochemical characteristics. These properties include an adjustable intrinsic energy gap, high speeds charging transport modulation efficiency, and exceptional conductance. Many scientists are interested in such novel, linear, stacked materials, including GDY. As a result, organized synthesis of GDY has been pursued, making it one of the first synthesized GDY materials. There are several methods to manipulate the band structure of GDY, including applying stresses, introducing boron/nitrogen loading, utilizing nanowires, and hydrogenations. The flexibility of GDY can be effectively demonstrated through the formation of nano walls, nanostructures, nanotube patterns, nanorods, or structured striped clusters. GDY, being a carbon material, has a wide range of applications owing to its remarkable structural and electrical characteristics. According to subsequent research, the GDY can be utilized in numerous energy generation processes, such as electrochemical water splitting (ECWS), photoelectrochemical water splitting (PEC WS), nitrogen reduction reaction (NRR), overall water splitting (OWS), oxygen reduction reaction (ORR), energy storage materials, lithium-Ion batteries (LiBs) and solar cell applications. These studies suggested that the use of GDY holds significant potential for the development and implementation of efficient, multimodal, and intelligent catalysts with realistic applications. However, the limitation of GDY and GDY-based composites for forthcoming studies are similarly acknowledged. The objective of these studies is to deliver a comprehensive knowledge of GDY and inspire further advancement and utilization of these unique carbon materials.

Novel insights into versatile nanomaterials integrated bioreceptors toward zearalenone ultrasensitive discrimination

Detrimental contamination of zearalenone (ZEN) in crops and foodstuffs has drawn intensive public attention since it poses an ongoing threat to global food security and human health. Highly sensitive and rapid response ZEN trace analysis suitable for complex matrices at different processing stages is an indispensable part of food production. Conventional detection methods for ZEN encounter many deficiencies and demerits such as sophisticated equipment and heavy labor intensity. Alternatively, the nanomaterial-based biosensors featured with high sensitivity, portability, and miniaturization are springing up and emerging as superb substitutes to monitor ZEN in recent years. Herein, we predominantly devoted to overview the progress in the fabrication strategies and applications of various nanomaterial-based biosensors, highlighting rationales on sensing mechanisms, response types, and practical analytical performance. Synchronously, the versatile nanomaterials integrating with diverse recognition elements for augmenting sensing capabilities are emphasized. Finally, critical challenges and perspectives to expedite ZEN detection are outlooked.

Photoelectrochemical biosensor for DNA demethylase detection based on enzymatically induced double-stranded DNA digestion by endonuclease-exonuclease system and Bi4O5Br2-Au/CdS photoactive material

A novel photoelectrochemical (PEC) biosensor for the detection of DNA demethylase MBD2 was developed based on Bi₄O₅Br₂-Au/CdS photosensitive material. Bi₄O₅Br₂ was firstly modified with gold nanoparticles (AuNPs), following with the modification onto the ITO electrode with CdS to realize the strong photocurrent response as a result of AuNPs had good conductibility and the matched energy between CdS and Bi₄O₅Br₂. In the presence of MBD2, double-stranded DNA (dsDNA) on the electrode surface was demethylated, which triggered the digestion activity of endonuclease HpaII to cleave dsDNA and induced the further cleavage of the dsDNA fragment by exonuclease III (Exo III), causing the release of biotin labeled dsDNA and inhibiting the immobilization of streptavidin (SA) onto the electrode surface. As a results, the photocurrent was increased greatly. However, in the absence of MBD2, HpaII digestion activity was inhibited by DNA methylation modification, which further caused the failure in the release of biotin, leading to the successful immobilization of SA onto the electrode to realize a low photocurrent. The sensor had a detection of 0.3-200 ng/mL and a detection limit was 0.09 ng/mL (3σ). The applicability of this PEC strategy was assessed by studying the effect of environmental pollutants on MBD2 activity.

AuNPs/CdS QDs/CeO2 ternary nanocomposite coupled with scrollable three-dimensional DNA walker mediated cycling amplification for sensitive photoelectrochemical miRNA assay

Herein, a novel ternary nanocomposite (AuNPs/CdS QDs/CeO₂) with excellent photoelectrochemical (PEC) performance was synthesized as signal probe to construct a near-zero background biosensor for sensitive miRNA-182-5p detection, by integrating with a scrollable three-dimensional (3D) DNA walker mediated cleavage cycling amplification. Impressively, the formation and rolling of scrollable 3D DNA walker triggered by target could realize dynamic, rapid and specific digestion of hairpin DNA on electrode with the aid of Exonuclease III (Exo III), which thus exposed abundant binding sites for assembling stable DNA labeled AuNPs/CdS QDs/CeO₂ nanoprobes. Thanks to the formation of type-II heterojunction (between CeO₂ and CdS QDs) and Schottky junction (generated by CeO₂ and AuNPs), an ideal photoelectric conversion efficiency accompanied with stunningly improved photocurrent was thus acquired for significantly improving the detection sensitivity. It turned out that the detection limit (LOD) of biosensor was ultralow (31 aM). Significantly, the proposed PEC biosensor would exhibit great potential for the composite as a splendid indicator and provide an avenue for constructing the sensing platform with excellent sensitivity and ultralow background.

AuNPs and graphdiyne nanocomposite as robust electrocatalyst for methyl parathion detection in real samples

The present work describes a simple and rapid synthesis method of gold nanoparticles and graphdiyne (AuNPs@GDY) nanocomposites including porous structure. Moreover, the synthesized AuNPs@GDY material was decorated on the glassy carbon electrode (GCE) with a drop coating method to construct a non-enzymatic electrochemical pesticides sensor. The micro-morphology and elemental composition of the materials were characterized by transmission electron microscopy (TEM) and energy dispersive spectroscopy (EDS). The electrocatalysis and conductivity of the material were studied with cyclic voltammetry (CV) and impedance method, respectively. The properties of the sensor were investigated by CV and differential pulse voltammetry (DPV). The results showed that AuNPs@GDY exhibited excellent electrocatalytic ability for methyl parathion in a wide linear range (from 0.25 ng/mL to 24.43 μg/mL) and low limit of detection value (6.2 pg/mL). Furthermore, the DPV method used in this paper was accurate and sensitive, and could be used for routine quality control of methyl parathion in kiwi fruit and tomato samples.

α-Synuclein in Parkinson's disease and advances in detection

Parkinson's disease (PD) is a threatening neurodegenerative disorder that seriously affects patients' life quality. Substantial evidence links the overexpression and abnormal aggregation of alpha-synuclein (α-Syn) to PD. α-Syn has been identified as a characteristic biomarker of PD, which indicates its great value of diagnosis and designing effective therapeutic strategy. This article systematically summarizes the pathogenic process of α-Syn based on recent researches, outlines and compares commonly used analysis and detection technologies of α-Syn. Specifically, the detection of α-Syn by new electrochemical, photochemical, and crystal biosensors is mainly examined. Furthermore, the speculation of future study orientation is discussed, which provides reference for the further research and application of α-Syn as biomarker.