Ni3S2/Ni Heterostructure Nanobelt Arrays as Bifunctional Catalysts for Urea-Rich Wastewater Degradation

Charge Self-Regulation at the Interface Engineering of the Metallic Heterostructure NiCoP@Co3S4 for Efficient Alkaline Overall Water Splitting

Developing heterostructures with high electrical conductivity and appropriate adsorption strength for oxygen intermediates is a crucial strategy to reduce the energy consumption of overall water splitting (OWS) and enhance the economic viability of hydrogen energy. This article proposes a novel metallic heterostructure (NiCoP@Co3S4) that is in situ grown on nickel foam. The composite of NiCoP and Co3S4 not only promotes effective charge transfer in the heterojunction and accelerates the kinetics of the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) but also optimizes the electronic structure of the catalyst through interface engineering. Density functional theory (DFT) calculations demonstrate that the formation of the heterostructure significantly increases the density of electronic states near the Fermi level (EF), thereby enhancing conductivity. Moreover, the d-band center of NiCoP@Co3S4 shifts closer to EF, which enhances the binding strength of reaction intermediates to the catalyst's active sites. This shift lowers the reaction activation energy and thus promotes the catalytic process. Experimental results show that the NiCoP@Co3S4 heterostructure exhibits excellent performance in both HER (η10 = 62 mV) and OER (η10 = 203 mV). An electrolyzer composed of NiCoP@Co3S4 electrodes requires only a potential of 1.48 V to achieve a current density of 10 mA cm-2. Additionally, it demonstrates good stability over 100 h of testing, outperforming the Pt/C || RuO2 catalyst (1.51 V@10 mA cm-2). This work provides an effective approach to achieving efficient water splitting for hydrogen production at low overpotentials through the self-regulation of charge in heterostructures, offering new insights for the design of efficient non-noble metal-based electrocatalysts.

Constructing Stable N-Doped Iron-Based Porous Carbon Nanocatalyst for Antibiotic Degradation and Bactericidal Detoxification

N-doped iron-based carbon is a promising catalyst to achieve peroxydisulfate (PDS) activation, but constructing efficient and stable N-doped iron-based carbon catalysts with uniformly distributed and firmly anchored nitrogen and iron sources remains challenging. Herein, we developed a stable N-doped magnetic porous carbon (NMPC) catalyst through self-polymerization and high-temperature pyrolysis of polydopamine and Fe3+ coordination complexes and explored it for PDS activation in antibiotic (tetracycline (TC) and ciprofloxacin) degradation and bactericidal detoxification. The NMPC/PDS system performed both radical and nonradical catalytic pathways for effective PDS activation, exhibiting 99.8% removal of TC. Thanks to the strong coordination of polydopamine with Fe3+, the resulting NMPC could firmly confine iron species in the porous N-carbonaceous matrices and efficiently prevent severe iron leaching, demonstrating good recyclability. It could maintain a removal rate as high as 92.4% after 5 cycles. After cycling, the iron leaching of the NMPC catalyst is only 0.026 mg/L, which is much lower than the WHO guideline value limits for drinking water of 0.3 mg/L. Moreover, the NMPC catalyst exhibits excellent stability and compatibility with various water conditions, including pH variations (3-9), coexisting substances, and different water sources. In addition, this NMPC/PDS system exhibits an excellent disinfection of both Escherichia coli and Staphylococcus aureus, with a high disinfection ratio of more than 99.9%. Toxic intermediate prediction and cell toxicity experiments further prove that the toxicity of the TC wastewater is significantly reduced after the treatment with the NMPC/PDS system.

Cobalt-nickel composite nano-grass as an excellent electrode for urea oxidation

Urea-contaminated wastewater requires extensive energy for proper treatment before safe discharge to the surroundings. Direct urea fuel cells (DUFCs) could be utilized efficiently to treat urea-polluted water and generate electricity. The precious/expensive catalyst utilized at the electrodes is one of the main significant challenges to DUFC commercialization. In this study, a non-precious standalone electrode cobalt-nickel composites directly formed using a facile hydrothermal method on a highly porous conductive nickel foam (NF) surface. The developed electrode has an excellent nano-grass morphology and demonstrates outstanding activity towards urea electro-oxidation. Using a 0.33 M urea, the current density @ 0.5 V (vs. Ag/AgCl) in the case of the cobalt-nickel composite with the nano-grass electrode (Co/NF) is significantly higher than that obtained using the bare NF electrode. At the same conditions, the Co/NF electrode is successfully operated for a long term (24 h) with a slight degradation in the performance, with no effect on the surface morphology. The steady-state current generated after 24 hours of cell operation is twenty times that obtained using the bare NF. The perfect performance of the modified electrode is related to the synergetic effect between Ni and Co, excellent nano-grass morphology, and ease of charge transfer. The prepared materials on the surface of the NF have a high electrochemically active surface area of 44 cm2 that is significantly higher than that of bare NF.

Engineering of novel vanadium-doped Ni4N@CuCoN0.6 heterostructure for enhancing urea oxidation reaction at high current density

Exploring highly effective nickel-based catalytic materials for urea oxidation reaction (UOR) at high current density remains a challenging task for urea electrolysis. Herein, the vanadium-doped Ni4N@CuCoN0.6 heterostructure with brush shape structure supported on copper foam (denoted as V-doped-Ni4N@CuCoN0.6/CF) is prepared to serve as a highly-performing UOR electrocatalyst at high current density (E10/500/1000 = 1.26/1.40/1.45 V). Thanks to the construction of heterojunction, the local charge density undergoes redistribution at the V-doped-Ni4N@CuCoN0.6/CF interface between Ni4N and CuCoN0.6, thereby significantly enriching the active site and facilitating the adsorption process of urea molecules in a 1.0 M KOH + 0.5 M urea solution. Notably, V-doping exerts an additional influence by modulating the electronic structure of the catalyst, potentially optimizing the urea adsorption/CO2 desorption process and reducing the energy barrier for the rate-determining step. Operando electrochemical impedance spectroscopy results show direct oxidation for urea molecules on the surface of V-doped-Ni4N@CuCoN0.6/CF, indicating that V-doping and heterostructure can effectively improve electron transfer. Furthermore, because the brush shape structure can be beneficial for bubble release and liquid transport on the catalyst's surface, for UOR stability, V-doped-Ni4N@CuCoN0.6/CF  can maintain at 500 mA cm-2 for 80 h. Overall, this work suggests a highly-performing UOR electrocatalyst and provides a promising strategy for developing highly-efficient catalysts for UOR applications.

Superhydrophilicity and Electronic Modulation on Self-Supported Lignin-Derived Carbon Coupled with NiO@MoNi4 for Enhancing Urea Electrolysis

Developing highly efficient biomass-derived carbon-based electrocatalysts remains challenging for urea electrolysis because most of these electrocatalysts show powder morphology, which can lead to Ostwald ripening during the reaction process, and its reaction mechanism should be further verified. Herein, self-supported lignin-derived carbon coupling NiO@MoNi4 heterojunction (NiO@MoNi4/C) possesses superhydrophilic properties and electronic modulation, boosting the performance of urea electrolysis. Electrochemical results show that an indirect oxidation step for urea oxidation reaction (UOR) and Volmer-Heyrovsky mechanism for hydrogen evolution reaction (HER) occurs on the surface of NiO@MoNi4/C. It displays low potentials for UOR (E10/500/1000 = 1.28/1.41/1.47 V) and for HER (E-10/-500/-1000 = -38/-264/-355 mV) in 1.0 M KOH + 0.5 M urea electrolyte solution. The good activity is ascribed to the self-supported lignin-derived carbon and heterojunction, which increases the number of active sites, optimizes electronic structure, and improves electron transfer. Benefiting from the self-supported lignin-derived carbon, NiO@MoNi4/C demonstrates corrosion resistance and superhydrophilicity, which avoids Ostwald ripening and accelerates gas-liquid transfer, thus, maintaining for 100 h at ±1000/±1500 mA cm-2 during the UOR and HER test. This work provides a good catalyst for urea electrolysis and presents a promising way for preparing lignin-derived carbon-based catalysts while expanding the application of lignin-based biomass carbon materials.

Interface Electron Transfer Direction-Tuned Urea Electrooxidation Over Multi-Interface Nickel Sulfide Heterojunctions

Hydrogen can be produced by electrolyzing urea aqueous solution under smaller overpotentials, owing to the lower thermodynamic potential of urea oxidation reaction (UOR) at anode than oxygen evolution reaction (OER). The efficient and selective electrocatalysts for UOR are crucial to achieve this. Herein, two NiS-based NiS/Ni3S2 and NiS/NiS2 heterojunctions with Ni cores embedding in nitrogen-doped carbon nanotubes (NiS/Ni3S2- and NiS/NiS2-Ni@NCNT) are demonstrated as efficient UOR electrocatalysts. The electrocatalytic UOR performance over heterojunctions is efficiently tuned by altering the electron transfer direction on their interfaces. NiS/Ni3S2-Ni@NCNT with interface electrons transferring from Ni3S2 to NiS, delivers a 10 mA cm-2 UOR current density in 1.0 m KOH with 0.5 m urea at 1.37 V, superior to NiS/NiS2-Ni@NCNT with the electron transfer direction from NiS to NiS2. Experimental and theoretical calculation results reveal that NiS/Ni3S2 Mott-Schottky heterojunctions facilitate the rapid in situ formation of NiOOH active species by removing electrons of Ni3S2, and also accelerate the adsorption and conversion of urea molecules and key intermediates of *CON2 at its interfaces. This work demonstrates an interface electron transfer direction tuning strategy on heterojunctions for harvesting high-performance UOR electrocatalysts.

Synergistic Inclusion of Reaction Activator and Reaction Accelerator to Ni-MOF Toward Extra-Ordinary Performance of Urea Oxidation Reaction

Recently electrochemical urea oxidation reaction (UOR) has emerged as the technology of demand for commercialization of urea-based energy conversion. However, the nascent idea is limited by the energy burden of threshold voltage and the sluggish reaction kinetics involving a six-electron transfer mechanism. Herein, for the first time, the engineering of electrocatalysts are proposed with simultaneous inclusion of UOR activator and UOR accelerator. Nitrogen-doped carbon-decorated Ni-based Metal Organic Framework (MOF) has been synthesized as the base catalyst material. MoO2 and rGO with varied loading have been attached to the MOF to get the desired MoO2/Ni-MOF/rGO heterostructure incorporating defects and crystal strain within the materials. Investigations reveal that the invoked lattice strain and atomic defects promote plenteous Ni3+ active sites. The optimized sample demonstrates extraordinary performance of UOR having the potential value as low as 1.32 V versus RHE to reach the current density of 10 mA cm-2 and the tafel slope is only 31 mV dec-1 reflecting very fast reaction kinetics. Here MoO2 plays the role of UOR activator whereas optimized loading of rGO proliferates the reaction speed. This work, experimentally and theoretically, presents a new insight to enhance electrocatalytic urea oxidation reaction opening an avenue of urea-based energy-harvesting technology.

Mechanistic Insights into the Stabilization of In Situ Formed γ-NiOOH Species on Ni60Nb40 Nanoglass for Effective Urea Electro-Oxidation

The formation of NiOOH on the catalyst surface is widely considered to be the active species in electrochemical urea oxidation reactions (UOR). Though in situ-formed NiOOH species are reported to be more active than the synthesized ones, the mechanistic study of the actual active species remains a daunting task due to the possibility of different phases and instability of surface-formed NiOOH. Herein, mechanistic UOR aspects of electrochemically activated metallic Ni60Nb40 Nanoglass showing stability toward the γ-NiOOH phase are reported, probed via in situ Raman spectroscopy, supported by electron microscopy analysis and X-ray photoelectron spectroscopy in contrast with the β-NiOOH formation favored on Ni foil. Detailed mechanistic study further reveals that γ-NiOOH predominantly follows a direct UOR mechanism while β-NiOOH favors indirect UOR from time-dependent Raman study, and electrochemical impedance spectroscopy (EIS) analysis. The Nanoglass has shown outstanding UOR performance with a low Tafel slope of 16 mV dec-1 and stability for prolonged electrolysis (≈38 mA cm-2 for 70 h) that can be attributed to the nanostructured glassy interfaces facilitating more γ-NiOOH species formation and stabilization on the surface. The present study opens up a new direction for the development of inexpensive Ni-based UOR catalysts and sheds light on the UOR mechanism.

One-step Sintering Synthesis of Ni3Se2-Ni Electrode with Robust Interfacial Bonding for Ultra-stable Hydrogen Evolution Reaction

Exploring efficient and robust self-supporting hydrogen evolution reaction (HER) electrodes using simple, accessible, and low-cost synthetic processes is crucial for the commercial application of water electrolysis at high current densities. Ni-based self-supporting electrodes are widely studied owing to their low cost and good catalytic performance. However, to date, the preparation of Ni-based electrodes requires multistep and complex preparation processes. In this study, a novel one-step in situ sintering method to synthesize mechanically stable and highly active Ni3Se2-Ni electrodes with well-controlled morphologies and structures is developed. Their excellent performance and durability can be attributed to the numerous highly active nano-Ni3Se2 catalysts embedded on the surface of the Ni skeleton, the excellent conductivity of the interconnected conductive network, and the strong interfacial bonding between Ni3Se2 and Ni. As a result, the Ni3Se2-Ni600 electrode can operate stably at 85 and 400 mA cm-2 for more than 800 and 300 h, respectively. Moreover, the Ni3Se2-Ni600 electrode displays outstanding stability for over 500 h in a commercial two-electrode system. This study provides a feasible one-step synthesis method for low-cost, high-efficiency metal selenide-metal self-supporting electrodes for water electrolysis.

4f-2p-3d Orbital Coupling in Ce-Ni3S2 Enhancing the Urea Oxidation Reaction

The electrocatalytic urea oxidation reaction (UOR) provides a promising alternative to the oxygen evolution reaction (OER) for various renewable energy-related systems owing to its lower thermodynamic barriers. However, its optimization and commercial utilization were hampered due to a lack of mechanistic understanding. Here, we demonstrate a Ce-doped Ni3S2 catalyst supported on Ni foam (Ce-Ni3S2/NF) with superior activity toward UOR. The resultant Ce-Ni3S2/NF catalyst exhibits a lower Tafel slope of 20.3 mV dec-1, a higher current density of 100 mA cm-2 at 1.39 V versus RHE, and better durability than those for Ni3S2/NF. Based on in situ synchrotron radiation X-ray absorption spectroscopy, in situ Fourier transform infrared (FTIR), and in situ Raman spectroscopy, we observe the structural reconstruction of sulfide and identify the adsorbed intermediates during UOR. Density functional theory (DFT) calculations reveal that Ce can regulate the electronic structure of Ni through Ce(4f)-O(2p)-Ni(3d) orbital electronic coupling. The modulated Ni sites have weaker adsorption of carbonaceous intermediates, thus accelerating the UOR. This work provides a promising route for the design of high-activity UOR catalysts.

Interface Enables Faster Surface Reconstruction in a Heterostructured CuSey/NiSex Electrocatalyst for Realizing Urea Oxidation

Creating affordable electrocatalysts and understanding the real-time catalytic process of the urea oxidation reaction (UOR) are crucial for advancing urea-based technologies. Herein, a Cu-Ni based selenide electrocatalyst (CuSey/NiSex/NF) was created using a hydrothermal technique and selenization treatment, featuring a heterogeneous interface rich in Cu2-xSe, Cu3Se2, Ni3Se4, and NiSe2. This catalyst demonstrated outstanding urea electrooxidation performance, achieving 10 mA cm-2 with just 1.31 V and sustaining stability for 96 h. Through in-situ Raman spectroscopy and ex-situ characterizations, it is discovered that NiOOH is formed through surface reconstruction in the UOR process, with high-valence Ni serving as the key site for effective urea oxidation. Moreover, the electrochemical analysis revealed that CuSey had dual effects. An analysis of XPS and electrochemical tests revealed that electron transfer from CuSey to NiSex within the CuSey/NiSex/NF heterostructure enhanced the UOR kinetics of the catalyst. Additionally, according to the in-situ Raman spectroscopy findings, the existence of CuSey facilitates a easier and faster surface reconstruction of NiSex, leading to the creation of additional active sites for urea oxidation. More significantly, this work provides an excellent "precatalyst" for highly efficient UOR, along with an in-depth understanding of the mechanism behind the structural changes in electrocatalysts and the discovery of their true active sites.

Amorphous MoS2 Decorated Ni3 S2 with a Core-shell Structure of Urchin-Like on Nickel-Foam Efficient Hydrogen Evolution in Acidic and Alkaline Media

The large-scale commercialization of the hydrogen evolution reaction (HER) necessitates the development of cost-effective and highly efficient electrocatalysts. Although transition metal sulfides, such as MoS2 and Ni3 S2 , hold great potential in the field of HER, their catalytic performance has been unsatisfactory due to incomplete exposure of active sites and poor electrical conductivity. In this work, via a simple hydrothermal strategy, amorphous MoS2 nanoshells in the form of urchin-like MoS2 -Ni3 S2 core-shell heterogeneous structure is realized and in situ loaded on nickel foam (A-MoS2 -Ni3 S2 -NF). In particular, XPS analysis results show that the coupling of amorphous MoS2 and Ni3 S2 makes the electrode surface exhibit electron-abundant property, which will have a positive impact on HER catalytic activity. In addition, the fully exposed active site of amorphous MoS2 is another crucial factor contributing to its high catalytic performance of A-MoS2 -Ni3 S2 -NF electrode. In particular, at a current density of 10 mA cm⁻2 , the overpotential of electrode is 95 mV (1.0 m KOH) and 145 mV (0.5 m H2 SO4 ). This work highlights the importance of amorphous MoS2 and MoS2 -Ni3 S2 of sea-urchin core-shell structure in optimizing HER performance, which provides an important reference for HER research.

Effects of Interfacial Electron Transport on Field Electron Emission from Carbon Nanotube Paste Emitters

Field electron emission from carbon nanotubes (CNT) is preceded by the transport of electrons from the cathode metal to emission sites. Specifically, a supporting layer indispensable for adhesion of CNT paste emitters onto the cathode metal would impose a potential barrier, depending on its work function and interfacial electron transport behaviors. In this paper, we investigated the supporting layer of silicon carbide and nickel nanoparticles reacted onto a Kovar alloy (Fe-Ni-Co) cathode substrate, which has been adopted for reliable CNT paste emitters. The X-ray diffraction, X-ray photoelectron spectroscopy, ultraviolet photoelectron spectroscopy, and electrical conductivity measurements showed that the reaction of silicon carbide and nickel nanoparticles on the Kovar metal strongly depends upon the post-vacuum-annealing conditions and can be classified into two procedures of a diffusion-induced reaction (DIR) and a diffusion-limited reaction (DLR). The prolonged annealing at 750 °C for 5 h before the main annealing of the CNT paste emitters at 800 °C for 5 min led to the DIR that has enhanced the Ni silicide phase and a lower potential barrier for the interfacial electron transport, resulting in increased and weakly temperature-dependent field electron emission from the CNT paste emitters. On the other hand, the DLR with only the main anneal of the CNT paste emitters at 800 °C for 5 min gave rise to a higher potential barrier for the electron transport and so lower and strongly temperature-dependent field electron emission. From the results of the interfacial electron transport for the DIR and DLR mechanisms in the CNT paste emitters, we concluded that the ambient temperature dependency of field electron emission from CNT tips in the moderate range of up to 400 °C, still controversial, is mainly attributed to the supporting layer of the CNT emitter rather than its intrinsic electron emission.

The Slight Adjustment in the Weight of Sulfur Sheets to Synthesize β-NiS Nanobelts for Maintaining Detection of Lower Concentrations of Glucose through a Long-Term Storage Test

The β-nickel sulfide (β-NiS) nanobelts were fabricated by electrodepositing a nickel nanosheet film on Indium tin oxide (ITO)-coated glass substrates and sulfuring the nickel film on ITO-coated glass substrates. The sulfurization method can be used to form nanobelts without a template. A small glass tube was used to anneal the sulfur sheet with a nickel nanosheet film. After applying vacuum to the tube, the specimen was annealed at 500 °C. By adjusting the weight of the sulfur sheet in a small glass tube, a nanobelt structure can be formed on the film for 4 h. The β-NiS nanobelt film had a sulfide and nickel molar ratio that was nearly 0.7 (S/Ni). After five years of a long-term storage test, the β-NiS nanobelt films were able to measure the glucose in a solution with the value of sensitivity of 8.67 µA cm-2 µM-1. The β-NiS nanobelt film also detected glucose with a limit of low detection (LOD) of around 0.173 µM. The estimation of reproducibility was over 98%. Therefore, the β-NiS nanobelt film has a significant ability to detect low concentrations of glucose in a solution.

Engineering cobalt molybdate nanosheet arrays with phosphorus-modified nickel as heterogeneous electrodes for highly-active energy-saving water splitting

Electrochemical urea electrolysis has been regarded as a promising strategy to replace traditional water-splitting technology to achieve hydrogen fuel due to its cost savings and high energy efficiency. Designing efficient bifunctional electrocatalysts easily is important but still faces significant challenges. Herein, an interface engineering strategy is used to construct a hybrid material by coupling cobalt molybdate (CoMoO₄) nanosheet arrays with phosphorus-modified nickel (P-Ni) particles on copper foam (P-Ni@CoMoO₄/CF) through the hydrothermal and in-situ electrodeposition process. Benefiting from the abundant catalytic active sites, low charge transfer resistance, and synergistic coupling effect, the optimal P-Ni@CoMoO₄/CF electrocatalyst presents a superior bifunctional activity for urea oxidation reaction (UOR) and hydrogen evolution reaction (HER). In detail, a small overpotential of 125 mV and a low potential of 1.36 V is required to attain the current density of 100 mA cm^-2 for HER and UOR, respectively. In the process of urea electrolysis, the P-Ni@CoMoO₄/CF-based electrolyzer provides a current density of 100 mA cm^-2 with an overall voltage of 1.50 V, about 170 mV less than that in a traditional water electrolyzer. The high performance of P-Ni@CoMoO₄/CF outperforms many recently reported electrodes, suggesting its promising application in energy-saving hydrogen production. Our work proposes a novel idea for the rational design and exploitation of low-cost and robust bifunctional electrodes for electrocatalysis.

Phase Segregation in Cu0.5 Ni0.5 Alloy Boosting Urea-Assisted Hydrogen Production in Alkaline Media

Coupling urea oxidation reaction (UOR) and hydrogen evolution reaction (HER) is promising for energy-efficient hydrogen production. However, developing cheap and highly active bifunctional electrocatalysts for overall urea electrolysis remains challenging. In this work, a metastable Cu_0.5 Ni_0.5 alloy is synthesized by a one-step electrodeposition method. It only requires the potentials of 1.33 and -28 mV to obtain the current density of ±10 mA cm^-2 for UOR and HER, respectively. The metastable alloy is considered to be the main reason causing the above excellent performances. In the alkaline medium, the as-prepared Cu_0.5 Ni_0.5 alloy exhibits good stability for HER; and conversely, NiOOH species can be rapidly formed during the UOR due to the phase segregation of Cu_0.5 Ni_0.5 alloy. In particular, for the energy-saving hydrogen generation system coupled with HER and UOR, only 1.38 V of voltage is needed at 10 mA cm^-2 ; and at 100 mA cm^-2 , the voltage decreases by ≈305 mV compared with that of the routine water electrolysis system (HER || OER). Compared with some catalysts reported recently, the Cu_0.5 Ni_0.5 catalyst owns superior electrocatalytic activity and durability. Furthermore, this work provides a simple, mild, and rapid method for designing highly active bifunctional electrocatalysts toward urea-supporting overall water splitting.

Facile, Controllable, and Ultrathin NiFe-LDH In Situ Grown on a Ni Foam by Ultrasonic Self-Etching for Highly Efficient Urine Conversion

As the primary source of nitrogen pollutants in domestic sewage, urine is also an alternative for H₂ production via electrochemical processes. However, it suffers from sluggish kinetics and noble-metal catalyst requirement. Here, we report a non-precious ultrathin NiFe-layered double hydroxide catalyst for the remarkable conversion of urea into N₂ and H₂, which is in situ grown on a Ni foam via ultrasonic self-etching in Fe³⁺/ethylene glycol (EG). EG regulates the etching rate of Fe³⁺, resulting in an ultrathin nanosheet structure with the aid of ultrasonication. This structure dramatically promotes the dehydrogenation process via decreasing the nanolayer thickness from 120 to 3.4 nm and leads to a 4.8-fold increase in the generation of active sites. It exhibits record urea oxidation kinetics (390.8 mA·cm^-2 at 1.5 V vs RHE) with excellent stability (120 h), which is 11.8 times better than that of commercial Pt/C catalyst (33.1 mA·cm^-2). Tests with real urine at 20 mA cm^-2 achieve 74% total nitrogen removal and 2853 μmol·h^-1 of H₂ production. This study provides an attractive landscape for producing H₂ by consuming urine biowastes.

Designing a Built-In Electric Field for Efficient Energy Electrocatalysis

To utilize intermittent renewable energy as well as achieve the goals of peak carbon dioxide emissions and carbon neutrality, various electrocatalytic devices have been developed. However, the electrocatalytic reactions, e.g., hydrogen evolution reaction/oxygen evolution reaction in overall water splitting, polysulfide conversion in lithium-sulfur batteries, formation/decomposition of lithium peroxide in lithium-oxygen batteries, and nitrate reduction reaction to degrade sewage, suffer from sluggish kinetics caused by multielectron transfer processes. Owing to the merits of accelerated charge transport, optimized adsorption/desorption of intermediates, raised conductivity, regulation of the reaction microenvironment, as well as ease to combine with geometric characteristics, the built-in electric field (BIEF) is expected to overcome the above problems. Here, we give a Review about the very recent progress of BIEF for efficient energy electrocatalysis. First, the construction strategies and the characterization methods (qualitative and quantitative analysis) of BIEF are summarized. Then, the up-to-date overviews of BIEF engineering in electrocatalysis, with attention on the electron structure optimization and reaction microenvironment modulation, are analyzed and discussed in detail. In the end, the challenges and perspectives of BIEF engineering are proposed. This Review gives a deep understanding on the design of electrocatalysts with BIEF for next-generation energy storage and electrocatalytic devices.

Ni2 Se3 -CuSex Heterostructure as a Highly Efficient Bifunctional Electrocatalyst for Urea-Assisted Hydrogen Generation

Coupling urea oxidation reaction (UOR) with hydrogen evolution reaction (HER) is an attractive alternative anode reaction for electrochemical hydrogen generation with low energy consumption. However, the development of highly efficient bifunctional electrocatalysts is still a challenge. In this work, Ni₂ Se₃ -CuSe_x heterostructure was synthesized on copper foam (Ni₃ Se₂ @CuSe_x /CF) by electrodeposition accompanied by a selenization process. Benefiting from the abundant active sites, faster reaction kinetics, and modulated electronic structure, the self-supporting Ni₃ Se₂ @CuSe_x /CF electrode exhibited superior catalytic performance. Extremely low overpotentials of 120 and 140 mV were achieved at the current density of 100 mA cm^-2 for HER/UOR, respectively. Respectively, in HER||UOR coupled electrolyzer for H₂ generation, the Ni₃ Se₂ @CuSe_x /CF||Ni₃ Se₂ @CuSe_x /CF delivered a low cell voltage of 1.49 V to reach a high current density of 100 mA cm^-2 along with good stability, outperforming most of the other well-developed materials to date. The rational design of coupled heterostructure as bifunctional electrodes is a promising approach for energy-saving H₂ production.

Crystalline-Amorphous Ni3S2-NiMoO4 Heterostructure for Durable Urea Electrolysis-Assisted Hydrogen Production at High Current Density

Developing bifunctional catalysts with good performance at a high current density for the urea oxidation reaction (UOR) and the hydrogen evolution reaction (HER) can effectively relieve the severe environmental and energy pressures. Herein, amorphous NiMoO₄ decorated Ni₃S₂ grown on nickel foam (Ni₃S₂-NiMoO₄/NF) is prepared to accelerate UOR and HER. The crystalline-amorphous heterostructure could regulate the interfacial electron structure to reduce the electron density near Ni₃S₂ for optimizing UOR and HER. The decoration of NiMoO₄ enhances its anti-poisoning ability for CO-intermediate species to show good stability at high current densities. Meanwhile, the nano-/microstructure with high hydrophilicity improves mass transfer and the accessibility of electrolyte. Driving high current densities of ±1000 mA cm^-2, it merely needs 1.38 V (UOR) and -263 mV (HER). For urea electrolysis, it can deliver 1000 mA cm^-2 at 1.73 V and stably operate at 500 mA cm^-2 for 120 h. Therefore, this study provides new ideas for durable urea electrolysis-assisted H₂ production.

In situ construction of Fe3O4@FeOOH for efficient electrocatalytic urea oxidation

Substituting water oxidation half of water splitting with anodic oxidation of urea can reduce the cost of H₂ production and provide an avenue for treating urea-rich wastewater. However, developing an efficient and stable electrocatalyst is necessary to overcome the indolent kinetics of the urea oxidation reaction (UOR). Accordingly, we have used the Schikorr reaction to deposit Fe₃O₄ particles on the nickel foam (Fe₃O₄/NF). Results from the various analysis indicated that under the operational conditions, Fe₃O₄ underwent surface reconstruction to produce a heterolayered structure wherein a catalytically active FeOOH layer encased a conducting Fe₃O₄. Fe₃O₄/NF outperformed RuO₂ as a UOR catalyst and delivered a current density of 10 50 and 100 mA cm^-2 at low applied potentials of 1.38 1.42 and 1.46 V, respectively, with a Tafel slope of 28 mV dec^-1. At the applied potential of 1.4 V, Fe₃O₄/NF demonstrated a turnover frequency (TOF) of 2.8 × 10^-3 s^-1, highlighting its superior intrinsic activity. In addition, a symmetrical urea electrolyzer constructed using Fe₃O₄/NF produced the current density of 10 mA cm^-2 at a cell voltage of 1.54 V.