Smart Fiber Membrane for pH-Induced Oil/Water Separation

Photo-Healable Fabrics: Achieving Structural Control via Photochemical Solid-Liquid Transitions of Polystyrene/Azobenzene-Containing Polymer Blends

While polymer fabrics are integral to a wide range of applications, their vulnerability to mechanical damage limits their sustainability and practicality. Addressing this challenge, our study introduces a versatile strategy to develop photohealable fabrics, utilizing a composite of polystyrene (PS) and an azobenzene-containing polymer (PAzo). This combination leverages the structural stability of PS to compensate for the mechanical weaknesses of PAzo, forming the fiber structures. Key to our approach is the reversible trans-cis photoisomerization of azobenzene groups within the PAzo under UV light exposure, enabling controlled morphological alterations in the PS/PAzo blend fibers. The transition of PAzo sections from a solid to a liquid state at a low glass transition temperature (Tg ∼ 13.7 °C) is followed by solidification under visible light, thus stabilizing the altered fiber structures. In this study, we explore various PS/PAzo blend ratios to optimize surface roughness and mechanical properties. Additionally, we demonstrate the capability of these fibers for photoinduced self-healing. When damaged fabrics are clamped and subjected to UV irradiation for 20 min and pressed for 24 h, the mobility of the cis-form PAzo sections facilitates healing while retaining the overall fabric structure. This innovative approach not only addresses the critical issue of durability in polymer fabrics but also offers a sustainable and practical solution, paving the way for its application in smart clothing and advanced fabric-based materials.

Recent advances in membrane technologies applied in oil-water separation

Effective treatment of oily wastewater, which is toxic and harmful and causes serious environmental pollution and health risks, has become an important research field. Membrane separation technology has emerged as a key area of investigation in oil-water separation research due to its high separation efficiency, low costs, and user-friendly operation. This review aims to report on the advances in the research of various types of separation membranes around emulsion permeance, separation efficiency, antifouling efficiency, and stimulus responsiveness. Meanwhile, the challenges encountered in oil-water separation membranes are examined, and potential research avenues are identified.

Advanced stimuli-responsive membranes for smart separation

Membranes have been extensively studied and applied in various fields owing to their high energy efficiency and small environmental impact. Further conferring membranes with stimuli responsiveness can allow them to dynamically tune their pore structure and/or surface properties for efficient separation performance. This review summarizes and discusses important developments and achievements in stimuli-responsive membranes. The most commonly utilized stimuli, including light, pH, temperature, ions, and electric and magnetic fields, are discussed in detail. Special attention is given to stimuli-responsive control of membrane pore structure (pore size and porosity/connectivity) and surface properties (wettability, surface topology, and surface charge), from the perspective of determining the appropriate membrane properties and microstructures. This review also focuses on strategies to prepare stimuli-responsive membranes, including blending, casting, polymerization, self-assembly, and electrospinning. Smart applications for separations are also reviewed as well as a discussion of remaining challenges and future prospects in this exciting field. This review offers critical insights for the membrane and broader materials science communities regarding the on-demand and dynamic control of membrane structures and properties. We hope that this review will inspire the design of novel stimuli-responsive membranes to promote sustainable development and make progress toward commercialization.

Scalable and switchable CO2-responsive membranes with high wettability for separation of various oil/water systems

Smart membranes with responsive wettability show promise for controllably separating oil/water mixtures, including immiscible oil-water mixtures and surfactant-stabilized oil/water emulsions. However, the membranes are challenged by unsatisfactory external stimuli, inadequate wettability responsiveness, difficulty in scalability and poor self-cleaning performance. Here, we develop a capillary force-driven confinement self-assembling strategy to construct a scalable and stable CO₂-responsive membrane for the smart separation of various oil/water systems. In this process, the CO₂-responsive copolymer can homogeneously adhere to the membrane surface by manipulating the capillary force, generating a membrane with a large area up to 3600 cm² and excellent switching wettability between high hydrophobicity/underwater superoleophilicity and superhydrophilicity/underwater superoleophobicity under CO₂/N₂ stimulation. The membrane can be applied to various oil/water systems, including immiscible mixtures, surfactant-stabilized emulsions, multiphase emulsions and pollutant-containing emulsions, demonstrating high separation efficiency (>99.9%), recyclability, and self-cleaning performance. Due to robust separation properties coupled with the excellent scalability, the membrane shows great implications for smart liquid separation.

pH-responsive nonwoven fabric with reversibly wettability for controllable oil-water separation and heavy metal removal

Removal of organic solvents and heavy metals in effluents is of great significance to environmental pollution control and ecological civilization construction. pH-responsive materials have unique advantages in treating complicated oily wastewater. In this work, an intelligent pH-responsive nonwoven fabric with excellent reversible wettability was prepared. The pH-sensitive polymer was synthesized by free radical polymerization (FRP) technique, then dipped with SiO₂ on PP fabric. The particular molecular structure of poly (dimethylaminoethyl methacrylate) (PDMAEMA) enabled the fabric surface to switch wettability rapidly between hydrophilic/underwater oleophobic and oleophobic/hydrophobic under pH stimulus and exhibit controllable selective separation of various oil/water mixtures. Furthermore, the fabric removed Pb²⁺ efficiently under a wide pH range. The experimetal results showed that the separation flux reached 19,229 ± 1656.43 L-h^-1-m^-2 for water and 19,342 ± 1796.77 L-m^-2-h^-1 for n-hexane. Besides, the obtained fabric effectively realized the separation and collection process of complex ternary mixtures. The fabric removed Pb²⁺ in solutions with efficiency up to 90.83%. After immersing in acid and alkali solutions for 24 h, no significant damage to the surface wettability. This economical and intelligent fabric is able to meet the different separation purposes of industrial wastewaters with complex compositions.

Special Superwetting Materials from Bioinspired to Intelligent Surface for On-Demand Oil/Water Separation: A Comprehensive Review

Since superwetting surfaces have emerged, on-demand oil/water separation materials serve as a new direction for meeting practical needs. This new separation mode uses a single porous material to allow oil-removing and water-removing to be achieved alternately. In this review, the fundamentals of wettability are systematically summarized in oil/water separation. Most importantly, the two states, bioinspired surface and intelligent surface, are summarized for on-demand oil/water separation. Specifically, bioinspired surfaces include micro/nanostructures, bioinspired chemistry, Janus-featured surfaces, and dual-superlyophobic surfaces that these superwetting materials can possess asymmetric wettability in one structure system or opposite underliquid wettability by prewetting. Furthermore, an intelligent surface can be adopted by various triggers such as pH, thermal and photo stimuli, etc., to control wettability for switchable oil/water separation reversibly, expressing a thought beyond nature to realize innovative oil/water separation by external stimuli. Remarkably, this review also discusses the advantages of all the materials mentioned above, expanding the separation scope from the on-demand oil/water mixtures to the multiphase immiscible liquid-liquid mixtures. Finally, the prospects of on-demand oil/water separation materials are also concluded.

Dual-responsive polyacrylonitrile-based electrospun membrane for controllable oil-water separation

Membrane separation based on smart materials with responsive wettability has attracted great attention due to the excellent performance of controllable oil-water separation. Herein, responsive copolymer originated from N-isopropylacrylamide and 2-(dimethylamino) ethyl methacrylate was synthesized and electrospun with polyacrylonitrile to fabricate smart composite membrane. The introduction of the responsive copolymer endowed the membrane with stimuli-responsive wettability to pH and temperature. Specifically, at the initial state, water was selectively blocked while oil passed through the membrane. After treatment with acidic water or CO₂, the reverse separation was realized due to the protonation of the tertiary amine group in the copolymer. Water was selectively passed through the membrane after heat treatment because of the structural change of membrane upon temperature. The developed membrane was able to separate different types of oil-water mixtures and surfactant-stabled emulsions with high efficiency. Additionally, two membranes controlled by temperature and pH were designed to construct a logic AND gate for oil-water separation, and the results demonstrated that only the temperature and acidity of the solution were simultaneously satisfied, the water could flow through the valve combination, and such capability made this smart membrane great potential for remotely controlling the oil-water separation process.

Thermo-Responsive Hydrophilic Support for Polyamide Thin-Film Composite Membranes with Competitive Nanofiltration Performance

Poly(N-isopropylacrylamide) (PNIPAAm) was introduced into a polyethylene terephthalate (PET) nonwoven fabric to develop novel support for polyamide (PA) thin-film composite (TFC) membranes without using a microporous support layer. First, temperature-responsive PNIPAAm hydrogel was prepared by reactive pore-filling to adjust the pore size of non-woven fabric, creating hydrophilic support. The developed PET-based support was then used to fabricate PA TFC membranes via interfacial polymerization. SEM–EDX and AFM results confirmed the successful fabrication of hydrogel-integrated non-woven fabric and PA TFC membranes. The newly developed PA TFC membrane demonstrated an average water permeability of 1 L/m² h bar, and an NaCl rejection of 47.0% at a low operating pressure of 1 bar. The thermo-responsive property of the prepared membrane was studied by measuring the water contact angle (WCA) below and above the lower critical solution temperature (LCST) of the PNIPAAm hydrogel. Results proved the thermo-responsive behavior of the prepared hydrogel-filled PET-supported PA TFC membrane and the ability to tune the membrane flux by changing the operating temperature was confirmed. Overall, this study provides a novel method to fabricate TFC membranes and helps to better understand the influence of the support layer on the separation performance of TFC membranes.

Role of chemistry in bio-inspired liquid wettability

Chemistry and topography are the two distinct available tools for customizing different bio-inspired liquid wettability including superhydrophobicity, superamphiphobicity, underwater superoleophobicity, underwater superoleophilicity, and liquid infused slippery property. In nature, various living species possessing super and special liquid wettability inherently comprises of distinctly patterned surface topography decorated with low/high surface energy. Inspired from the topographically diverse natural species, the variation in surface topography has been the dominant approach for constructing bio-inspired antiwetting interfaces. However, recently, the modulation of chemistry has emerged as a facile route for the controlled tailoring of a wide range of bio-inspired liquid wettability. This review article aims to summarize the various reports published over the years that has elaborated the distinctive importance of both chemistry and topography in imparting and modulating various bio-inspired wettability. Moreover, this article outlines some obvious advantages of chemical modulation approach over topographical variation. For example, the strategic use of the chemical approach has allowed the facile, simultaneous, and independent tailoring of both liquid wettability and other relevant physical properties. We have also discussed the design of different antiwetting patterned and stimuli-responsive interfaces following the strategic and precise alteration of chemistry for various prospective applications.

Recent Progress in Microfiltration/Ultrafiltration Membranes for Separation of Oil and Water Emulsions

Oily wastewater has become one of the leading causes of environmental pollution. A massive quantity of oily wastewater is released from industries, oil spills, and routine activities, endangering the ecosystem's sustainability. Due to the enormous negative impact, researchers put strenuous efforts into developing a sustainable solution to treat oily wastewater. Microfiltration/ultrafiltration membranes are considered an efficient solution to treat oily wastewater due to their low cost, small footprint, facile operation, and high separation efficiencies. However, membranes severely fouled during the separation process due to oil's adsorption and cake layer formation, which shortens the membranes' life. This review has critically discussed the microfiltration/ultrafiltration membrane synthesizing methods and their emulsion's separation performance. In the end, key challenges and their possible solutions are highlighted to provide future direction to synthesize next-generation membranes.

Smart surfaces with reversibly switchable wettability: Concepts, synthesis and applications

As a growing hot research topic, manufacturing smart switchable surfaces has attracted much attention in the past a few years. The state-of-the-art study on reversibly switchable wettability of smart surfaces has been presented in this systematic review. External stimuli are brought about to render the alteration in chemical conformation and surface morphology to drive the wettability switch. Here, starting from the fundamental theories related to the surfaces wetting principles, highlights on different triggers for switchable wettability, such as pH, light, ions, temperature, electric field, gas, mechanical force, and multi-stimuli are discussed. Different applications that have various wettability requirement are targeted, including oil-water separation, droplets manipulation, patterning, liquid transport, and so on. This review aims to provide a deep insight into responsive interfacial science and offer guidance for smart surface engineering. It ends with a summary of current challenges, future opportunities, and potential solutions on smart switch of wettability on superwetting surfaces.

NaOH-Induced Fabrication of a Superhydrophilic and Underwater Superoleophobic Styrene-Acrylate Copolymer Filtration Membrane for Effective Separation of Emulsified Light Oil-Polluted Water Mixtures

Oil-polluted water mixtures are difficult to separate, and thus, they are considered as a global challenge. A superior superhydrophilic and low-adhesive underwater superoleophobic styrene-acrylate copolymer filtration membrane is constructed using a salt (NaOH)-induced phase-inversion approach. The as-fabricated filtration membrane provides a hierarchical-structured surface morphology and three-dimensional high density open-rough porous geometry with a special chemical composition including highly accessible hydrophilic -COO^- agents, which all are of great importance for long-term usage of immiscible/emulsified (light) oil-polluted wastewater separation. The separation is performed with a high efficiency and a high flux under either a gravity-driven force or a small applied pressure of 0.1 bar. The filtration membrane indicates an excellent anti-fouling property and is easily recycled during multiple cycles. The outstanding performance of the filtration membrane in separating oil-polluted water mixtures and the cost-effective synthetic approach as well as commercially scaled-up initial materials all highlight its potential for practical applications.

In Situ Electric-Induced Switchable Transparency and Wettability on Laser-Ablated Bioinspired Paraffin-Impregnated Slippery Surfaces

Switchable wetting and optical properties on a surface is synergistically realized by mechanical or temperature stimulus. Unfortunately, in situ controllable wettability together with programmable transparency on 2D/3D surfaces is rarely explored. Herein, Joule-heat-responsive paraffin-impregnated slippery surface (JR-PISS) is reported by the incorporation of lubricant paraffin, superhydrophobic micropillar-arrayed elastomeric membrane, and embedded transparent silver nanowire thin-film heater. Owing to its good flexibility, in situ controllable locomotion for diverse liquids on planar/curved JR-PISS is unfolded by alternately applying/discharging low electric-trigger of 6 V. Simultaneously, optical visibility can be reversibly converted between opaque and transparent modes. The switching principle is that in the presence of Joule-heat, solid paraffin would be melt and swell within 20 s to enable a slippery surface for decreasing light scattering and frictional force derived from contact angle hysteresis (FCAH ). Once Joule-heat is discharged, undulating rough surface would reconfigure by cold-shrinkage of paraffin within 8 s to render light blockage and high FCAH . Upon its portable merit, in situ thermal management, programmable visibility, as well as steering functionalized droplets by electric-activated JR-PISSs are successfully deployed. Compared with previous Nepenthes-inspired slippery surfaces, the current JR-PISS is more competent for in situ harnessing optical and wetting properties on-demand.

Cellulose-based special wetting materials for oil/water separation: A review

Oil spill accidents and oily wastewater discharged by petrochemical industries have severely wasted water resources and damaged the environment. The use of special wetting materials to separate oil and water is efficient and environment-friendly. Cellulose is the most abundant renewable resource and has natural advantages in removing pollutants from oily wastewater. The application and modification of cellulose as special wetting materials have attracted considerable research attention. Therefore, we summarized cellulose-based superlipophilic/superhydrophobic and superhydrophilic/superoleophobic materials exhibiting special wetting properties for oil/water separation. The treatment mechanism, preparation technology, treatment effect, and representative projects of oil-bearing wastewater are discussed. Moreover, cellulose-based intelligent-responsive materials for application to oil/water separation and the removal of other pollutants from oily wastewater have also been summarized. The prospects and potential challenges of all the materials have been highlighted.

Chitosan-Functionalized Recycled Polyethylene Terephthalate Nanofibrous Membrane for Sustainable On-Demand Oil-Water Separation

The preservation of marine ecosystems is one of the most severe challenges at present. In particular, oil-water separation from oil spills and oily wastewater is important. For this reason, a low-cost, effective, and sustainable polymeric solution is in high demand. In this work, a controlled-wettability membrane for selective separation of oil-water mixtures and emulsions is developed. The nanofibrous membrane is prepared via a facile and cost-effective electrospinning technique using environmentally sustainable materials, such as recycled polyethylene terephthalate and chitosan. The effect of different concentrations of chitosan on the morphology, chemical composition, mechanical properties, wettability, and separation performance of the membrane is evaluated. The membranes exhibited underoil superhydrophobic and underwater superoleophobic behavior, which is essential to perform the selective separation. In fact, the designed filter has competitive antifouling properties (oil intrusion pressure > 45 kPa) and showed high heavy- and light-oil/water separation efficiencies (>95%) both for emulsions and immiscible mixtures.

A review of recent progress in polymeric electrospun nanofiber membranes in addressing safe water global issues

With rapid advancement in water filtration materials, several efforts have been made to fabricate electrospun nanofiber membranes (ENMs). ENMs play a crucial role in different areas of water treatment due to their several advantageous properties such as high specific surface area, high interconnected porosity, controllable thickness, mechanical robustness, and wettability. In the broad field of water purification, ENMs have shown tremendous potential in terms of permeability, rejection, energy efficiency, resistance to fouling, reusability and mechanical robustness as compared to the traditional phase inversion membranes. Upon various chemical and physical modifications of ENMs, they have exhibited great potential for emerging applications in environment, energy and health sectors. This review firstly presents an overview of the limiting factors influencing the morphology of electrospun nanofibers. Secondly, it presents recent advancements in electrospinning processes, which helps to not only overcome drawbacks associated with the conventional electrospinning but also to produce nanofibers of different morphology and orientation with an increased rate of production. Thirdly, it presents a brief discussion about the recent progress of the ENMs for removal of various pollutants from aqueous system through major areas of membrane separation. Finally, this review concludes with the challenges and future directions in this vast and fast growing area.

Magnetic-Responsive Superhydrophobic Surface of Magnetorheological Elastomers Mimicking from Lotus Leaves to Rose Petals

In nature, many plants have evolved various wettability surfaces to survive and thrive in diverse environments. For example, the superhydrophobic surface of lotus can keep itself clean, while the rose petals can retain droplets for a long time. The former is referred to the "lotus effect," and the latter is known as the "rose petal effect." This research proposes a method to fabricate magnetic-responsive superhydrophobic magnetorheological elastomers (MREs) which could reversibly and instantly transition their surface wetting state between the "lotus effect" and the "rose petal effect." These surfaces with controllable wettability could find applications in the manipulation of liquids in biological and chemical systems. The MREs are cured by applying a uniform magnetic field to form "mountain-like" microstructures on their surfaces. This initial surface is rough and exhibits the lotus leaf effect. Because of the nonuniform magnetically induced deformation, the surface micromorphology and roughness can be altered by an applied magnetic field. The state of water droplets on its surface is changed from the Wenzel state to the Cassie-Baxter (CB) state. Therefore, the proposed MRE surface could switch their dynamic wetting features between the "rose petals" and "lotus leaves" via a magnetic field. An experimental platform for the wetting features of MRE surfaces is established to characterize the dynamic behaviors of water drops on MREs under a magnetic field. A magneto-mechanic coupled model is proposed to interpret how the magnetic field influences the MRE surface as well as the droplet movement.

Advanced Materials with Special Wettability toward Intelligent Oily Wastewater Remediation

Clean water resources are essential to our human society. Oil leakage has caused water contamination, which leads to serious shortage of clean water, environmental deterioration, and even increasing number of deaths. It is of great urgency to solve the oil-polluted water problems worldwide. Efficient oil/water separation, especially emulsified oil/water mixture separation, is widely used to mitigate water pollution issues. Recently, advanced materials with special wettability have been employed for oily wastewater remediation. Moreover, by endowing them with various intelligent functions, smart materials can effectively separate complex oil/water mixtures including extremely stable emulsions. In this review, oil/water separation mechanisms and various fabrication methods of special wettability separation materials are summarized. We highlight the special wettable materials with intelligent functions, including photocatalytic, self-healing, and switchable oil/water separation materials, which can achieve self-cleaning, self-healing, and efficient oily wastewater treatment. In each section, the acting mechanisms, fabricating technologies, representative studies, and separation efficiency are briefly introduced. Lastly, the challenges and outlook for oil/water separation based on the special wettability materials are discussed.

Photo-switchable smart superhydrophobic surface with controllable superwettability

An azobenzene-based smart superhydrophobic surface undergoes reversible transformations among multiple bioinspired superwetting states through photo-manipulation, demonstrating promising potential on a rewritable platform for droplet transportation.

2D and 3D Bulk Materials for Environmental Remediation: Air Filtration and Oil/Water Separation

Air and water pollution pose an enormous threat to human health and ecosystems. In particular, particulate matter (PM) and oily wastewater can cause serious environmental and health concerns. Thus, controlling PM and oily wastewater has been a great challenge. Various techniques have been reported to effectively remove PM particles and purify oily wastewater. In this article, we provide a review of the recent advancements in air filtration and oil/water separation using two- and three-dimensional (2D and 3D) bulk materials. Our review covers the advantages, characteristics, limitations, and challenges of air filters and oil/water separators using 2D and 3D bulk materials. In each section, we present representative works in detail and describe the concepts, backgrounds, employed materials, fabrication methods, and characteristics of 2D and 3D bulk material-based air filters and oil/water separators. Finally, the challenges, technical problems, and future research directions are briefly discussed for each section.

Design of poly ionic liquids modified cotton fabric with ion species-triggered bidirectional oil-water separation performance

A novel ion species-responsive oil-water separation material was designed: poly ionic liquid (PIL) was carried on the graphene oxide (GO) by free radical polymerization, then the PIL modified GO sheets (GO-PIL) were coated on cotton fabric (CF). The wettability of the obtained GO-PIL coated CF (GO-PIL@CF) could be switched between hydrophilic and hydrophobic state with the exchange of different types of counteranions. Water contact angle of the GO-PIL@CF could be switched between 0 to about 145°; and correspondingly the underwater oil contact angle would change between about 148 to 0°. Because of the switchable wettability, the GO-PIL@CF could selectively separate water or oil from the oil-water mixtures. Meanwhile, due to the loose fibrous structure, the GO-PIL@CF showed relatively high permeate fluxes; in the hydrophilic state the water flux was about 36000 L/m²h, while in the hydrophobic state the fluxes for the low-density oils (n-hexane and toluene) were about 59,000 and 65000 L/m²h, respectively. Consequently, the separation processes could be completed simply by gravity. In addition, because of the soft and flexible mechanical property, the GO-PIL@CF could serve as wrappage of traditional absorbents and be applied directly as absorbent to remove water or oil selectively from their mixtures.

Construction of Natural Loofah/Poly(vinylidene fluoride) Core-Shell Electrospun Nanofibers via a Controllable Janus Nozzle for Switchable Oil-Water Separation

Developing microstructure and multifunctional membranes toward switchable oil-water separation has been highly desired in oily wastewater treatment. Herein, a controllable Janus nozzle was employed to innovatively electrospin natural loofah/poly(vinylidene fluoride) (PVDF) nanofibers with a core-shell structure for gravity-driven water purification. By adjusting flow rates of the PVDF component, a core-shell structure of the composite fibers was obtained caused by the lower viscosity and surface tension of PVDF. In addition, a steady laminar motion of fluids was constructed based on the Reynolds number of flow fields being less than 2300. In order to investigate the formation mechanism of the microstructure, a series of Janus nozzles with different lengths were controlled to study the blending of the two immiscible components. The gravity difference between the two components might cause disturbance of the jet motion, and the PVDF component unidirectionally encapsulated the loofah to form the shell layer. Most importantly, the dry loofah/PVDF membranes could separate oil from an oil-water mixture, while the water-wetted membrane exhibited switchable separation that could separate water from the mixtures because of the hydroxyl groups of the hydrophilic loofah hydrogen-bonding with water molecules and forming a hydration layer. The composite fibers can be applied in water remediation in practice, and the method to produce core-shell structures seems attractive for technological applications involving macroscopic core-shell nano- or microfibers.

One-step electrospinning cellulose nanofibers with superhydrophilicity and superoleophobicity underwater for high-efficiency oil-water separation

Cellulose nanofibers have been widely applied in many fields because of its unique advantages. However, it is a challenge to prepare cellulose nanofibers by electrospinning directly owing to the special molecular structure of cellulose. This limits the practical applications of cellulose nanofibers. In this work, cellulose nanofibers were successfully prepared directly by design of new electrospinning receiving device and optimization of process parameters. The as-prepared cellulose nanofibers exhibit good oil-water separation performances. Driven solely by gravity, the separation flux of the cellulose nanofibers for mixture of oil and water reaches 34,300.6 L m^-2 h^-1, and the separation flux and efficiency for surfactant-stabilized emulsion of oil and water reach 2503.7 L m^-2 h^-1 and over 98.3%, respectively. The as-prepared cellulose nanofibers also exhibit good mechanical properties and reusability. The breaking strength of the cellulose nanofibers can reach 148.2 cN. The separation fluxes of cellulose nanofibers for mixtures and emulsions of oil and water can be maintained 99.7% and 86.3% of the initial value after being used for 20 times. Furthermore, the as-prepared cellulose nanofibers have good degradability. These properties render as-prepared cellulose nanofibers as promising materials with potential applications in oil-water separation.

Design Principles for Aqueous Interactive Materials: Lessons from Small Molecules and Stimuli-Responsive Systems

Interactive materials are at the forefront of current materials research with few examples in the literature. Researchers are inspired by nature to develop materials that can modulate and adapt their behavior in accordance with their surroundings. Stimuli-responsive systems have been developed over the past decades which, although often described as "smart," lack the ability to act autonomously. Nevertheless, these systems attract attention on account of the resultant materials' ability to change their properties in a predicable manner. These materials find application in a plethora of areas including drug delivery, artificial muscles, etc. Stimuli-responsive materials are serving as the precursors for next-generation interactive materials. Interest in these systems has resulted in a library of well-developed chemical motifs; however, there is a fundamental gap between stimuli-responsive and interactive materials. In this perspective, current state-of-the-art stimuli-responsive materials are outlined with a specific emphasis on aqueous macroscopic interactive materials. Compartmentalization, critical for achieving interactivity, relies on hydrophobic, hydrophilic, supramolecular, and ionic interactions, which are commonly present in aqueous systems and enable complex self-assembly processes. Relevant examples of aqueous interactive materials that do exist are given, and design principles to realize the next generation of materials with embedded autonomous function are suggested.

Reversible Photodriven Droplet Motion on Ti3C2 MXene Film for Diverse Liquids

The manipulation of liquid droplets on a specific surface with reversible wettability is of great importance for various applications from science to industry. Herein, the concept of a smart, flexible photodriven droplet motion (PDM) device with programmable wettability is designed using the 2D material of MXene film. Because of the MXene photothermal property, the Vaseline layer in the device is in transition between solid and liquid states under the heat transformation due to light illumination, thus attractively producing a reversible wettability for liquid motion with respect to sliding and pinning. Multifarious pathways for liquid motion could be designed through the flexibility of light illumination, which is a revolutionary enhancement in diverse liquid motion to form the desired pathways. In addition, we demonstrated liquid motion under illumination of the back face, which has a profound influence on applications, such as microfluidic systems, microengines, and liquid manipulation.

Fabrication of pH-Sensitive Superhydrophilic/Underwater Superoleophobic Poly(vinylidene fluoride)-graft-(SiO2 Nanoparticles and PAMAM Dendrimers) Membranes for Oil-Water Separation

The efficient treatment of oil-water emulsions under acidic condition remains a widespread concern. Poly(amidoamine) (PAMAM) dendrimer with hyperbranched structures and a large amount of primary and tertiary amino groups has exhibited advantages to solve this issue. Here, a novel poly(vinylidene fluoride)-graft-(SiO₂ nanoparticles and PAMAM dendrimers) (PVDF-g-SiO₂ NPs/PAMAM) membrane was fabricated using a surface-grafting strategy. SiO₂ NPs were immobilized on PVDF-g-poly(acrylic acid) (PAA) membranes for improving the surface roughness, and PAMAM dendrimers were further immobilized on the membrane surface by interfacial polymerization (IP) for improving the surface energy. The obtained membrane demonstrated a water contact angle and a stable underwater-oil contact angle of 0° and >150°, respectively. These characteristics endowed the membrane with excellent water permeability [>3100 L/(m²·h) at 0.9 bar] and separation efficiency (>99%) during oil-water separation. Furthermore, the PAMAM chain will extend from a collapsed state into a fully extension state because of the protonation of amine groups under acidic condition, thus achieving a low underwater oil-adhesion property, fouling resistance, desirable stability, and recyclability (over 12 cycles) during usage. This work shows a promising prospect for the treatment of corrosive emulsions under acidic condition.

Fabrication of an Inverse Size-Selective Membrane Using an Electrospun Nanofiber Mat as a Template

Size-selective membranes have applications in water purification and other areas. Although many methods have been developed for the fabrication of nanoporous membranes, each method has its limitations. For example, thin films containing uniform nanochannels can be prepared from block copolymer precursors. However, block copolymers are expensive. The electrospinning of a polymer solution can yield long nanofibers that fold into mats and the diameters of these fibers can be tuned from nanometers to micrometers. Infusing another polymer into the voids between these fibers and subsequently removing the nanofiber template should yield an inverse porous membrane, complementary in pore structure to the original nanofiber mat membrane. In this paper, we report on the fabrication of these membranes. We discovered that the flux across such membranes increased by thermally annealing the nanofiber mats under pressure before the infusion of the second polymer and by etching the surfaces of the final membrane with plasma to expose the encapsulated nanochannels. We further discovered that the size of the pores formed at the junction of the fused nanofibers and, eventually, the nanotubes governed the size selectivity of the final membrane. The pore size at the junctions increased by increasing the thermal annealing temperature and, thus, the extent of fiber fusion. The developed methodology is general and should be useful for the fabrication of nanoporous membranes from different materials possessing pore diameters that are governed by the diameter of the templating nanofibers and the extent of their fusion.

Durable Light-Driven Three-Dimensional Smart Switchable Superwetting Nanotextile as a Green Scaled-Up Oil-Water Separation Technology

Stimuli-responsive polymer architectures are attracting a lot of interest, but it still remains a great challenge to develop effective industrial-scale strategies. A single-stage and cost-effective approach was applied to fabricate a three-dimensional (3D) smart responsive surface with fast and reversibly switchable wetting between superhydrophobicity and superhydrophilicity/underwater superoleophobicity properties induced by photo and heat stimuli. Commercially available PVDF and P25TiO₂ as starting materials fabricated with a scaled-up electrospinning approach were applied to prepare 3D smart switchable PVDF-P25TiO₂ nanotextile superwetted by both UV and solar light that is simply recovered by heat at a reasonable time. The superhydrophilic/underwater superoleophobic photo-induced nanotextile will act in "water-removing" mode in which water quickly passes through and the oil is blocked on the surface. An acceptable recycling, reusing, and superior antifouling and self-cleaning performance arising from a TiO₂ photocatalytic effect makes it highly desired in a green scaled-up industry oily wastewater treatment technology. With these advantages, a large-scale industrial production process can be simply simulated by applying a conducting mesh-like collector substrate.

Superwetting pH-Responsive Polyaniline Coatings: Toward Versatile Separation of Complex Oil-Water Mixtures

Intelligent materials with controlled wettability have caused widespread concern in various sewage applications. In this study, a smart pH-responsive polyaniline (PANI) coating has been synthesized in one step in aqueous media and coated on materials in common use, such as polyester mesh, cotton fabric, and sponge. The PANI coatings can switch their superwettability response to ambient pH and be used in continuous separation of oil-water-oil systems which are frequently found in actual oil leakage accidents. Moreover, bidirectional emulsion separation (water-in-oil and oil-in-water) can be realized on such a coating material. The coated sponge can be used as an oil adsorbent for invertible capture and release by changing pH. Based on excellent antifouling and recyclability, as well as the prominent chemical/mechanical stability, PANI coatings can be applied in actual oily wastewater treatment systems. It is anticipated that the coating materials will show promise in many applications because of the cost-effective and environmentally friendly aqueous media preparation procedure.