New Chitosan-Thiomer: An Efficient Colorimetric Sensor and Effective Sorbent for Mercury at Ultralow Concentration

Synergistic impact of pretreatment by planetary ball milling on the efficiency of chemical modifications of glutinous starch through thiolation: Synthesis and characterization

This study examined the effects of planetary ball milling on glutinous rice starch (GS) thiolation. Native GS (NGS) and ball-milled GS (BMGS) were oxidized with periodate and conjugated with cysteamine (CYSM). FTIR, XRD, SEM, and EDX analyses confirmed successful conjugation with altered crystallinity, morphology, and elemental composition. BMGS-CYSM contained 828.9 ± 54.8 μmol/g of free thiol groups, which was 2.2 times greater than that of NGS-CYSM, and had disulfide bonds measuring 210.55 ± 6.25 μmol/g. Precipitation pH of GS-CYSM conjugates ranged between 6.3 and 7.2, with zeta potential values maintained near neutrality. Cytotoxicity tests showed >85 % Caco-2 cell viability after 24-h of exposure. GS-CYSM conjugates displayed layered, sheet-like structures instead of the original granular morphology, with BMGS-CYSM exhibiting more structural changes than NGS-CYSM. Swelling of GS-CYSM discs in an aqueous medium followed Fickian kinetics, with BMGS-CYSM exhibiting superior swelling rates. BMGS-CYSM showed lower erosion percentages in the pH 6.8 phosphate-buffered saline medium. Mucoadhesion tests on porcine intestinal mucosa using tensile strength and rotating cylinder techniques suggested the superior mucoadhesiveness of BMGS-CYSM over NGS-CYSM and BMGS, with mucosal retention exceeding 24 h. This study demonstrates that mechanical pretreatment via planetary ball milling enhances thiolation efficiency, offering a promising approach for developing mucoadhesive GS materials for drug delivery.

Preparation of novel thiolated chitosan with significant antioxidant activity

The aim of this study was to synthesize thiolated chitosan derivative and evaluated its antioxidant activity. Thiol groups were introduced into chitosan and hydroxypropyl trimethylammonium chloride chitosan quaternary ammonium salt (HACC) by microwave reaction, respectively. At the same time, a series of compounds containing thiol groups were introduced at the amino site. The structure of the chitosan derivatives was identified by FTIR and 1H NMR. The thiol groups content, thermal stability, water solubility and cytotoxicity of the chitosan derivative were evaluated. The antioxidant activity of chitosan derivatives was evaluated using superoxide anion radical scavenging activity assay, DPPH radical scavenging activity assay, hydroxyl radical scavenging activity assay and reducing power assay. The results showed that the thiolated chitosan derivatives obtained in this study possessed excellent antioxidant activity, which provides a new idea for the further study of chitosan antioxidants.

Symmetrical Ligand's Fabricated Porous Silicon Surface Based Photoluminescence Sensor for Metal Detection and Entrapment

This study was based on the development of surface-based photoluminescence sensor for metal detection, quantification, and sample purification employing the solid sensory chip having the capability of metal entrapment. The Co(II), Cu(II) and Hg(II) sensitive fluorescence sensor (TP) was first synthesized and characterized its sensing abilities towards tested metal ions by using fluorescence spectral investigation while the synthesis and complexation of the receptor was confirmed by the chromogenic, optical, spectroscopic and spectrometric analysis. Under optical investigation, the ligand solution exhibited substantial chromogenic changes as well as spectral variations upon reacting with copper, cobalt, and mercuric ions, while these behaviors were not seen for the rest of tested metallic ions i.e., Na+, Ag+, Ni2+, Mn2+, Pd2+, Pb2+, Cd2+, Zn2+, Sn2+, Fe2+, Fe3+, Cr3+, and Al3+. These colorimetric alterations and spectral shifting could potentially be employed to detect and quantify these specific metal ions. After the establishment of the ligand's selective complexation ability towards selected metals, it was fabricated over the substituted porous silicon surface (FPS) keeping in view of the development of surface-based photoluminescence sensor (TP-FPS) for the selected metal sensation and entrapment to purify the sample just be putting off the metal entrapped sensory solid chip. Surface characterization and ligand fabrication was inspected by plan and cross sectional electron microscopic investigations, vibrational and electronic spectral analysis. The sensitivity of the ligand (TP) in the solution phase metal discrimination was determined by employing the fluorescence titration analysis of the ligand solution after progressive induction of Co2+, Cu2+, and Hg2+, which afford the detection limit values of 2.14 × 10- 8, 3.47 × 10- 8 and 3.13 × 10- 3, respectively. Concurrently, photoluminescence titration of the surface fabricated sensor (TP-FPS) revealed detection limit values of 3.14 × 10- 9, 7.43 × 10- 9, and 8.21 × 10- 4, respectively, for the selected metal ions.

An advanced approach combining solid-state NMR with powder diffraction applied to newly synthesized iso-thio-uronium salts

The focus here is on the structural study of iso-thio-uronium salts and the application of intermolecular distances obtained by solid-state NMR (ssNMR) in determining crystal structures from powder diffraction data. The synthesis of three new tetra-fluoro-borate salts and two bromide salts of iso-thio-uronium compounds is presented first, followed by structural and spectroscopic studies. The tetra-fluoro-borates were further analysed using advanced ssNMR techniques to obtain a set of intermolecular 19F⋯13C, 11B⋯11B, 1H⋯1H and 13C⋯1H distances with an estimation of their precision. These distances were subsequently used as restraints in the crystal structure determination process from simulated powder diffraction data. The results show that using intermolecular distances obtained by ssNMR can increase the probability of finding the correct solution, creating new opportunities for the structural analysis of poorly diffracting compounds. This approach paves the way for solving more complex substances, such as solvates, cocrystals or complex polymorphs with many independent molecules, where traditional powder X-ray diffraction methods often reach their limits.

Ratiometric Fluorescence and Chromogenic Probe for Trace Detection of Selected Transition Metals

The design and development of a fluorescence sensor aimed at detecting and quantifying trace amounts of toxic transition metal ions within environmental, biological, and aquatic samples has garnered significant attention from diagnostic and testing laboratories, driven by the imperative to mitigate the health risks associated with these contaminants. In this context, we present the utilization of a heterocyclic symmetrical Schiff Base derivative for the purpose of fluorogenic and chromogenic detection of Co2+, Cu2+ and Hg2+ ions. The characterization of the ligand involved a comprehensive array of techniques, including physical assessments, optical analyses, NMR, FT-IR, and mass spectrometric examinations. The mechanism of ligand-metal complexation was elucidated through the utilization of photophysical parameters and FT-IR spectroscopic analysis, both before and after the interaction between the ligand and the metal salt solution. The pronounced alterations observed in absorption and fluorescence spectra, along with the distinctive chromogenic changes, following treatment with Co2+, Cu2+ and Hg2+, affirm the successful formation of complexes between the ligands and the treated metal ions. Notably, the receptor's complexation response exhibited selectivity towards Co(II), Cu(II), and Hg(II), with no observed chromogenic changes, spectral variations, or band shifts for the various tested metal ions, including Na+, Ag+, Ni2+, Mn2+, Pd2+, Pb2+, Cd2+, Zn2+, Sn2+, Fe2+, Fe3+, Cr3+ and Al3+. This absence of interaction between these metal ions and the ligand could be attributed to their compact or inadequately conducive conduction bands for complexation with the ligand's structural composition. To quantify the sensor's efficacy, fluorescence titration spectra were employed to determine the detection limits for Co2+, Cu2+ and Hg2+, yielding values of 2.92 × 10-8, 8.91 × 10-8, and 4.39 × 10-3 M, respectively. The Benesi-Hildebrand plots provided association constant values for the ligand-cobalt, ligand-copper, and ligand-mercury complexes as 0.74, 2.52, and 13.89 M-1, respectively.

Dendritic DNA/quantum dot nanostructure-based electrochemiluminescence biosensor for sensitive assay of Hg2

A novel dendritic DNA-quantum dot (QD) electrochemiluminescence (ECL) probe was developed and an ECL biosensor constructed for sensitive detection of Hg2+ in water samples by combining with enzyme-assisted multiple cycle amplification strategy. Firstly, the Y-shaped structure was formed based on the Hg2+-induced enzymatic cycle amplification technique, which improved the cutting efficiency and realized the double-amplified DNA product. Moreover, a unique dendritic DNA nanostructure loading numerous QDs was constructed, which can greatly amplify the ECL signal. After the dendritic DNA signal probe was connected to the CNT/gold nanocomposites/electrode by DNA products, the ECL biosensor was constructed for sensitive detection of Hg2+. The proposed dendritic DNA probe opens new ECL application of quantum dots. The smart design of Y-structure coupled with multiple amplification strategy greatly improves detection accuracy and sensitivity; thus, the biosensor not only can detect Hg2+ in water samples, but also has a good application prospect for other targets in environmental analysis.

Microwave-assisted, sulfhydryl-modified β-cyclodextrin-silymarin inclusion complex: A diverse approach to improve oral drug bioavailability via enhanced mucoadhesion and permeation

The current study aimed to generate a sulfhydryl-modified β-cyclodextrin-silymarin complex (sulfhydryl-modified β-CD-SMN complex) and to evaluate the enchantment in solubility, permeability, and bioavailability of a model BCS Class IV drug silymarin (SMN). For this purpose, sulfhydryl-modified β-CD was synthesized by replacing all primary and secondary -OH groups at the β-CD backbone with sulfhydryl groups via a novel microwave-assisted technique. Afterward, sulfhydryl-modified β-CD was complexed with silymarin and characterized by FTIR and 1H NMR spectroscopy. Moreover, no. of sulfhydryl groups and their oxidative stability, solubility, safety, mucoadhesion, release, diffusion, and rheological studies were performed. Furthermore, in-vivo studies were conducted to confirm enhanced pharmacokinetic properties of silymarin. Sulfhydryl-modified β-CD showed 8291 ± 418 μmol/g sulfhydryl groups that were prone to oxidation at pH ≥ 5, however, most of the sulfhydryl groups were found stable at pH 4 having a pKa value of 8.3. Modified β-CD oligomer showed improved solubility of SMN, significantly enhanced drug transport across goat intestinal mucosa, 78-fold improved mucoadhesion, improved drug dissolution and 4.4-fold enhanced dynamic viscosity. No toxic effects were reported to Caco-2 cells at 0.5% (m/v) concentration of sulfhydryl-modified β-CD for 24 h. The apparent permeability coefficient (Papp) of SMN was 6.9-fold enhanced on goat intestinal mucosa. Moreover, in-vivo studies confirmed a significantly enhanced oral bioavailability of SMN due to combination with sulfhydryl-modified β-CD. Based on these findings, the sulfhydryl-modified β-CD-silymarin inclusion complex can be a promising technique to enhance the bioavailability of BCS Class IV drugs via enhanced solubility, mucoadhesion, and permeability triple action.

Adsorption and Removal of Mercury(II) by a Crosslinked Hyperbranched Polymer Modified via Sulfhydryl

In this study, the highly crosslinked hyperbranched polyamide-amines (H-PAMAMs) were first prepared via one-pot methods and then modified with thiourea to synthesize a novel adsorbent containing sulfhydryl groups (CHAP-SH), which was used to adsorb Hg(II) ions from aqueous solutions. The adsorption characteristics and mechanism of CHAP-SH for Hg(II) ions were systematically studied. As expected, CHAP-SH exhibited a rapid removal performance toward Hg(II), and the maximum adsorption capacity was 282.74 mg/g at 318 K and pH = 4.5. The whole adsorption behavior could be well described by the pseudo-second-order kinetic model and Langmuir and Redlich-Peterson adsorption isotherm models, which reflected that the adsorption process was mainly monolayer chemisorption. Meanwhile, CHAP-SH had strong selectivity for Hg(II) in the presence of multimetal ions, and it had excellent recoverability after five cycles. In order to further elucidate the adsorption mechanism, the adsorbents before and after adsorption were characterized by Fourier transform infrared spectroscopy, scanning electron microscopy, X-ray photoelectron spectroscopy, thermogravimetric analysis, and energy-dispersive X-ray spectroscopy, and the results showed that the nitrogen-containing, oxygen-containing, and sulfur-containing groups in the adsorbent molecule had synergistic complexation with Hg(II). These results indicated that the adsorbents had great potential in the future treatment of aqueous solutions containing Hg(II).

Novel amidinothiourea-modified chitosan microparticles for selective removal of Hg(II) in solution

Glutaraldehyde-crosslinked chitosan microparticles (CGP) prepared via the inversed-phase emulsification were successively modified by epichlorohydrin (ECH) and amidinothiourea (AT) as novel adsorbent (CGPET) for selective removal of Hg(II) in solution. FTIR, EA, XPS, SEM-EDX, TG, DTG, and XRD results indicated that CGPET had ample -NH₂ and CS, relative rough surface, mean diameter of ~40 μm, great thermal stability, and crystalline degree of 2.4%, beneficial to the uptake of Hg(II). The optimum parameters (pH 5, dosage 1 g/L, contact time 4 h, and initial concentration 150 mg/L) were acquired via batches of adsorption experiments. Adsorption behavior was well described by the Liu isothermal and pseudo-second-order kinetics models, and the maximum adsorption capacity was 322.51 mg/g, surpassing many reported adsorbents. Regeneration and coexisting-ion tests demonstrated that CGPET had outstanding reusability (R_r > 86.89% at the fifth cycle) and selectivity (R_s > 93%). Besides, its potential adsorption sites and mechanisms were proposed.

Exploration on Structural and Optical Properties of Nanocrystalline Cellulose/Poly(3,4-Ethylenedioxythiophene) Thin Film for Potential Plasmonic Sensing Application

There are extensive studies on the development of composite solutions involving various types of materials. Therefore, this works aims to incorporate two polymers of nanocrystalline cellulose (NCC) and poly(3,4-ethylenethiophene) (PEDOT) to develop a composite thin film via the spin-coating method. Then, Fourier transform infrared (FTIR) spectroscopy is employed to confirm the functional groups of the NCC/PEDOT thin film. The atomic force microscopy (AFM) results revealed a relatively homogeneous surface with the roughness of the NCC/PEDOT thin film being slightly higher compared with individual thin films. Meanwhile, the ultraviolet/visible (UV/vis) spectrometer evaluated the optical properties of synthesized thin films, where the absorbance peaks can be observed around a wavelength of 220 to 700 nm. An optical band gap of 4.082 eV was obtained for the composite thin film, which is slightly lower as compared with a single material thin film. The NCC/PEDOT thin film was also incorporated into a plasmonic sensor based on the surface plasmon resonance principle to evaluate the potential for sensing mercury ions in an aqueous medium. Resultantly, the NCC/PEDOT thin film shows a positive response in detecting the various concentrations of mercury ions. In conclusion, this work has successfully developed a new sensing layer in fabricating an effective and potential heavy metal ions sensor.

A comprehensive survey upon diverse and prolific applications of chitosan-based catalytic systems in one-pot multi-component synthesis of heterocyclic rings

Heterocyclic compounds are among the most prestigious and valuable chemical molecules with diverse and magnificent applications in various sciences. Due to the remarkable and numerous properties of the heterocyclic frameworks, the development of efficient and convenient synthetic methods for the preparation of such outstanding compounds is of great importance. Undoubtedly, catalysis has a conspicuous role in modern chemical synthesis and green chemistry. Therefore, when designing a chemical reaction, choosing and or preparing powerful and environmentally benign simple catalysts or complicated catalytic systems for an acceleration of the chemical reaction is a pivotal part of work for synthetic chemists. Chitosan, as a biocompatible and biodegradable pseudo-natural polysaccharide is one of the excellent choices for the preparation of suitable catalytic systems due to its unique properties. In this review paper, every effort has been made to cover all research articles in the field of one-pot synthesis of heterocyclic frameworks in the presence of chitosan-based catalytic systems, which were published roughly by the first quarter of 2020. It is hoped that this review paper can be a little help to synthetic scientists, methodologists, and catalyst designers, both on the laboratory and industrial scales.

Thiomers of Chitosan and Cellulose: Effective Biosorbents for Detection, Removal and Recovery of Metal Ions from Aqueous Medium

Removal of toxic metal ions using adsorbents is a well-known strategy for water treatment. While chitosan and cellulose can adsorb weakly some types of metals, incorporating thiols as metal chelating agents can improve their sorption behaviors significantly. Presented in this review are the various chemical modification strategies applicable for thiolation of chitosan and cellulose in the forms of mercaptans, xanthates and dithiocarbamates. Moreover, much attention has been paid to the specific strategies for controlling the thiolation degree and characterization approaches for establishing the structure-property relationship. Also, the kinetics and isotherm models that elucidate the adsorption processes and mechanisms induced by the thiomers have been explained. These thiomers have found great potentials in the applications associated with metal removal, metal recovery and metal detection.

Thiolated-Polymer-Based Nanoparticles as an Avant-Garde Approach for Anticancer Therapies-Reviewing Thiomers from Chitosan and Hyaluronic Acid

Thiomers (or thiolated polymers) have broken through as avant-garde approaches in anticancer therapy. Their distinguished reactivity and properties, closely linked to their final applications, justify the extensive research conducted on their preparation and use as smart drug-delivery systems (DDSs). Multiple studies have demonstrated that thiomer-rich nanoformulations can overcome major drawbacks found when administering diverse active pharmaceutical ingredients (APIs), especially in cancer therapy. This work focuses on providing a complete and concise review of the synthetic tools available to thiolate cationic and anionic polymers, in particular chitosan (CTS) and hyaluronic acid (HA), respectively, drawing attention to the most successful procedures. Their chemical reactivity and most relevant properties regarding their use in anticancer formulations are also discussed. In addition, a variety of NP formation procedures are outlined, as well as their use in cancer therapy, particularly for taxanes and siRNA. It is expected that the current work could clarify the main synthetic strategies available, with their scope and drawbacks, as well as provide some insight into thiomer chemistry. Therefore, this review can inspire new research strategies in the development of efficient formulations for the treatment of cancer.

α-Cellulose Fibers of Paper-Waste Origin Surface-Modified with Fe3O4 and Thiolated-Chitosan for Efficacious Immobilization of Laccase

The utilization of waste-paper-biomass for extraction of important α-cellulose biopolymer, and modification of extracted α-cellulose for application in enzyme immobilization can be extremely vital for green circular bio-economy. Thus, in this study, α-cellulose fibers were super-magnetized (Fe3O4), grafted with chitosan (CTNs), and thiol (-SH) modified for laccase immobilization. The developed material was characterized by high-resolution transmission electron microscopy (HR-TEM), HR-TEM energy dispersive X-ray spectroscopy (HR-TEM-EDS), X-ray diffraction (XRD), vibrating sample magnetometer (VSM), X-ray photoelectron spectroscopy (XPS), and Fourier transform infrared spectroscopy (FT-IR) analyses. Laccase immobilized on α-Cellulose-Fe3O4-CTNs (α-Cellulose-Fe3O4-CTNs-Laccase) gave significant activity recovery (99.16%) and laccase loading potential (169.36 mg/g). The α-Cellulose-Fe3O4-CTNs-Laccase displayed excellent stabilities for temperature, pH, and storage time. The α-Cellulose-Fe3O4-CTNs-Laccase applied in repeated cycles shown remarkable consistency of activity retention for 10 cycles. After the 10th cycle, α-Cellulose-Fe3O4-CTNs possessed 80.65% relative activity. Furthermore, α-Cellulose-Fe3O4-CTNs-Laccase shown excellent degradation of pharmaceutical contaminant sulfamethoxazole (SMX). The SMX degradation by α-Cellulose-Fe3O4-CTNs-Laccase was found optimum at incubation time (20 h), pH (3), temperatures (30 °C), and shaking conditions (200 rpm). Finally, α-Cellulose-Fe3O4-CTNs-Laccase gave repeated degradation of SMX. Thus, this study presents a novel, waste-derived, highly capable, and super-magnetic nanocomposite for enzyme immobilization applications.

The progress on sulfhydryl modified polymers with regard to synthesis, characterization and mucoadhesion

The concepts of mucoadhesion and mucoadhesive polymers were introduced in the 20th century, leading to several advantages. These included enhanced drug absorption and extended residence at specific site of action. Polymeric excipients underwent chemical modification with sulfhydryl groups on the polymeric backbone so as to improve mucoadhesive features as well as potential. This modification resulted in compounds mimicking the nature of secreted mucus glycoproteins. Thus, these thiol group-bearing excipients presented the ability to attach covalently to the mucosa by the disulfide bonding. Nevertheless, the first generation of these thiol-modified polymers, named thiomers, presented disadvantages such as low stability in aqueous media and/or the high susceptibility towards oxidation along with the drawback of low sufficient reactive functional moieties on the polymeric backbone at lower pH. Therefore, in the 21st century, a second generation of preactivated or S-protected polymers with protected thiol moieties were developed, as well as a third generation of thiomers, solving some of the previously described problems. This review article aimed to highlight the progess on a potent sulfhydryl modification during the last decades and the posterior characterization and in vitro/ex vivo/in vivo mucoadhesiveness.

Thiolation of Chitosan Loaded over Super-Magnetic Halloysite Nanotubes for Enhanced Laccase Immobilization

This study focuses on the development of a nanosupport based on halloysite nanotubes (HNTs), Fe3O4 nanoparticles (NPs), and thiolated chitosan (CTs) for laccase immobilization. First, HNTs were modified with Fe3O4 NPs (HNTs-Fe3O4) by the coprecipitation method. Then, the HNTs-Fe3O4 surface was tuned with the CTs (HNTs-Fe3O4-CTs) by a simple refluxing method. Finally, the HNTs- Fe3O4-CTs surface was thiolated (-SH) (denoted as; HNTs- Fe3O4-CTs-SH) by using the reactive NHS-ester reaction. The thiol-modified HNTs (HNTs- Fe3O4-CTs-SH) were characterized by FE-SEM, HR-TEM, XPS, XRD, FT-IR, and VSM analyses. The HNTs-Fe3O4-CTs-SH was applied for the laccase immobilization. It gave excellent immobilization of laccase with 100% activity recovery and 144 mg/g laccase loading capacity. The immobilized laccase on HNTs-Fe3O4-CTs-SH (HNTs-Fe3O4-CTs-S-S-Laccase) exhibited enhanced biocatalytic performance with improved thermal, storage, and pH stabilities. HNTs-Fe3O4-CTs-S-S-Laccase gave outstanding repeated cycle capability, at the end of the 15th cycle, it kept 61% of the laccase activity. Furthermore, HNTs-Fe3O4-CTs-S-S-Laccase was applied for redox-mediated removal of textile dye DR80 and pharmaceutical compound ampicillin. The obtained result marked the potential of the HNTs-Fe3O4-CTs-S-S-Laccase for the removal of hazardous pollutants. This nanosupport is based on clay mineral HNTs, made from low-cost biopolymer CTs, super-magnetic in nature, and can be applied in laccase-based decontamination of environmental pollutants. This study also gave excellent material HNTs-Fe3O4-CTs-SH for other enzyme immobilization processes.

Phenothiazine-chitosan based eco-adsorbents: A special design for mercury removal and fast naked eye detection

The aim of the paper was to investigate the ability of an eco-friendly luminescent xerogel prepared by chitosan crosslinking with a phenothiazine luminogen to detect and remove heavy metals. Its ability to give a divergent morphological and optical response towards fifteen environmental relevant metals was investigated by naked eye and UV lamp, fluorescence spectroscopy and scanning electron microscopy. A distinct response was noted for mercury, consisting in the transformation of the xerogel into a rubber-like material accompanied by the red shifting of the color of emitted light from yellow-green to greenish-yellow domain. The particularities of the metals anchoring into the xerogel were analyzed by FTIR spectroscopy and X-ray diffraction. The morphological changes and the metal uptake were analyzed by SEM-EDAX, swelling and gravimetric methods. It was concluded that mercury has a superior affinity towards this heteroatoms rich system, leading to a secondary crosslinking. This directed a great absorption capacity of 1673 mg/g and a specific morphological response for mercury ion concentrations up to 0.001 ppm.

Thiolated Chitosans: A Multi-talented Class of Polymers for Various Applications

Various properties of chitosan can be customized by thiolation for very specific needs in a wide range of application areas. Since the discovery of thiolated chitosans, many studies have proven their advantageous characteristics, such as adhesion to biological surfaces, adjustable cross-linking and swelling behavior, controllable drug release, permeation as well as cellular uptake enhancement, inhibition of efflux pumps and enzymes, complexation of metal ions, antioxidative properties, and radical scavenging activity. Simultaneously, these polymers remain biodegradable without increased toxicity. Within this Review, an overview about the different possibilities to covalently attach sulfhydryl ligands to the polymeric backbone of chitosan is given, and the resulting versatile physiochemical properties are discussed in detail. Furthermore, the broad spectrum of applications for thiolated chitosans in science and industry, ranging from their most advanced use in pharmaceutical and medical science over wastewater treatment to the impregnation of textiles, is addressed.

Development of Biopolymer and Conducting Polymer-Based Optical Sensors for Heavy Metal Ion Detection

Great efforts have been devoted to the invention of environmental sensors as the amount of water pollution has increased in recent decades. Chitosan, cellulose and nanocrystalline cellulose are examples of biopolymers that have been intensively studied due to their potential applications, particularly as sensors. Furthermore, the rapid use of conducting polymer materials as a sensing layer in environmental monitoring has also been developed. Thus, the incorporation of biopolymer and conducting polymer materials with various methods has shown promising potential with sensitively and selectively toward heavy metal ions. In this feature paper, selected recent and updated investigations are reviewed on biopolymer and conducting polymer-based materials in sensors aimed at the detection of heavy metal ions by optical methods. This review intends to provide sufficient evidence of the potential of polymer-based materials as sensing layers, and future outlooks are considered in developing surface plasmon resonance as an excellent and valid sensor for heavy metal ion detection.

Ratiometric assay of mercury ion based on nitrogen-doped carbon dots with two different optical signals: second-order scattering and fluorescence

Ratiometric assays, which can effectively surmount external interference, have attracted extensive research interests. Herein, a novel ratiometric sensing platform for Hg²⁺ is designed based on nitrogen-doped carbon dots (N-CDs) with two different optical signals. Under a single excitation, N-CDs have two emission peaks around 668 nm and 412 nm, which are second-order scattering and fluorescence, respectively. Upon the addition of Hg²⁺, the weak scattering emission at 668 nm can be increased apparently, while the strong fluorescence intensity at 412 nm is weakened. Moreover, the ratio of scattering intensity to fluorescence intensity is linearly dependent on Hg²⁺ concentration (0.1-10 μM and 10-30 μM, respectively), and the detection limit is 66 nM. In addition, the ratiometric sensing mechanism is investigated in detail, which is due to the combined effect of aggregation-induced fluorescence quenching and scattering enhancement. Furthermore, the developed sensing approach holds a promising application for Hg²⁺ detection in actual samples. Graphical abstract.

Inhibitory activity of biofunctionalized silver-capped N-methylated water-soluble chitosan thiomer for microbial and biofilm infections

One of the most important self-defense strategies employed by bacteria to resist the action of antibiotics is a biofilm formation upon the infected surface. Thus, there is an urgent need to explore novel candidates that have potent antibacterial and anti-biofilm effects to tackle this challenge. In this endeavor, we have transformed shrimp shell wastes to N-methylated water-soluble chitosan thiomer (MWSCT) which was used as either a chelating agent or bio-reductant and capping agent for Ag(I) ions in the preparation of a Ag(I)MWSCT complex or silver nanocomposite (Ag(0)MWSCT), for targeting antibacterial and anti-biofilm applications. The antibacterial and anti-biofilm performance of the new methylated chitosan thiomer (MWSCT) and its silver architectures (Ag(I)MWSCT, Ag(0)MWSCT) were assessed in vitro against E. coli and S. aureus. These new materials have significant capacities to synergistically inhibit the proliferation of the targeted bacterial cells and biofilm formation, in a structure- and species-dependent manner. Ag(0)MWSCT emerged as the most potent compound in inhibiting the growth of bacterial strains (MIC_{E. coli}/ MIC_{S. aureus} = 0.05/ 0.34 μg/mL, 1.6-/ 2.5-times lower than that recorded for the clinical drug (ciprofloxacin, Cipro). Also, this nanocomposite showed the highest anti-biofilm effects (only 1.7% E. coli biofilm growth; 11.8% staphylococcal biofilm growth).

A dendritically amplified fluorescent signal probe on SiO2 microspheres for the ultrasensitive detection of mercury ions

In this work, a new kind of dendritically amplified fluorescent signal probe on SiO₂ microspheres was controllably fabricated by the terminal deoxynucleotidyl transferase (TdT)-catalyzed incorporation of nucleotides combined with bio-barcode (BBC) amplification for the ultrasensitive detection of Hg²⁺. A thymine T-Hg²⁺-T hairpin structure was first formed and further initiated the strand displacement amplification (SDA) reaction, generating a mimic target (MT). MT hybridized with a capture probe 1 (C1) on SiO₂ microspheres, and the 3'-hydroxyl (OH) termini of MT initiated TdT-based DNA extension, producing abundant poly-guanine sequences (G1). Then, G1 hybridized with a capture probe 2 (C2) with abundant cytosine (C) species to assemble multiple C2/reporter probe-AuNPs onto the SiO₂ microspheres. The reporter DNA further initiated TdT-based extension with a poly-T sequence (T1) to link large numbers of signal probes, which generated a very high fluorescence signal for the ultrasensitive detection of target Hg²⁺. This TdT-based signal amplification method coupled with SDA exhibits extraordinary sensitivity for Hg²⁺ assay with a limit down to 1.0 aM. The proposed highly sensitive fluorescence strategy holds great potential for detecting targets in environmental and biological fields.

Thiolated polymers: Bioinspired polymers utilizing one of the most important bridging structures in nature

Thiolated polymers designated "thiomers" are obtained by covalent attachment of thiol functionalities on the polymeric backbone of polymers. In 1998 these polymers were first described as mucoadhesive and in situ gelling compounds forming disulfide bonds with cysteine-rich substructures of mucus glycoproteins and crosslinking through inter- and intrachain disulfide bond formation. In the following, it was shown that thiomers are able to form disulfides with keratins and membrane-associated proteins exhibiting also cysteine-rich substructures. Furthermore, permeation enhancing, enzyme inhibiting and efflux pump inhibiting properties were demonstrated. Because of these capabilities thiomers are promising tools for drug delivery guaranteeing a strongly prolonged residence time as well as sustained release on mucosal membranes. Apart from that, thiomers are used as drugs per se. In particular, for treatment of dry eye syndrome various thiolated polymers are in development and a first product has already reached the market. Within this review an overview about the thiomer-technology and its potential for different applications is provided discussing especially the outcome of studies in non-rodent animal models and that of numerous clinical trials. Moreover, an overview on product developments is given.

3‑Mercapto‑propanoic acid modified cellulose filter paper for quick removal of arsenate from drinking water

This paper reports a simple, facile and rapid preparation of 3‑mercapto‑propanoic acid (MPA) modified cellulose filter paper (MPA-Cell paper) for arsenate removal from drinking water. The MPA was covalently grafted to the cellulose filter paper (Cell) by esterification process through the formation of O‑acylisourea intermediate and characterized by the FTIR, SEM, EDS and XPS analyses. The arsenate adsorption efficiency was studied for batch and semi-continuous systems while exploring the adsorption kinetics, isotherm and the effect of pH for the former. The experimental data fitted well with Langmuir, Dubinin-Radushkevich (DR) and pseudo second order kinetic models. The mechanism of adsorption was studied by FTIR spectroscopy utilizing the adsorption isotherm, kinetic model and XPS results. The modified filter paper performed well at nearly neutral pH in arsenate removal through adsorption and demonstrated a significant arsenate uptake capacity of 92.59 mg/g. The DR and FTIR results indicated that the adsorption of arsenate ion occurred through ion exchange process. The MPA-Cell paper could have a potential use as low-cost but efficient commercial adsorbent for arsenate abatement from contaminated drinking water by both batch as well as semi-continuous operating systems. The MPA-Cell paper could purify ground water containing high level of arsenate.

Selective Adsorption toward Hg(II) and Inhibitory Effect on Bacterial Growth Occurring on Thiosemicarbazide-Functionalized Chitosan Microsphere Surface

The work presented here aims to fabricate dual-purpose adsorbent with adsorption selectivity for Hg(II) and antibacterial activity. TSC-PGMA-MACS microspheres were first constructed via esterification of malic acid (MA) with chitosan (CS) and through successively grafting glycidyl methacrylate (GMA) and thiosemicarbazide (TSC) onto MACS microsphere surfaces. Fourier transform infrared spectroscopy, elemental analysis, energy-dispersive X-ray spectrometry, X-ray diffraction, differential scanning calorimetry, thermogravimetry, differential thermogravimetry, scanning electron microscopy, and Brunauer-Emmett-Teller results provided ample evidence that new mesoporous adsorbent, with 35.340 m² g^-1 of specific surface area and abundant -NH₂ and C═S, was successfully fabricated and had loose crystalline, thermodynamically stable, and well-defined architectures, beneficial for Hg(II) adsorption and bacterial cell killing. Optimal adsorption parameters were determined via varying pH, time, concentrations, and temperatures, and pH 6.0 was chosen as an optimal pH for Hg(II) adsorption. Adsorption behavior, described well by pseudo-second-order kinetic and Langmuir isotherm models, and thermodynamic parameters implied a chemical, monolayer, endothermic, and spontaneous adsorption process, and the maximum adsorption capacity for Hg(II) was 242.7 mg g^-1, higher than most of the available adsorbents. Competitive adsorption exhibited excellent adsorption selectivity for Hg(II) in binary-metal solutions. Besides, TSC-PGMA-MACS microspheres had outstanding reusability even after five times recycling, with adsorption capability loss <14%. Several potential adsorption sites and bonding modes were proposed. Notably, TSC-PGMA-MACS microspheres before and after adsorption were of high antibacterial activity against Escherichia coli and Staphylococcus aureus (MICs, 2 and 0.25 mg mL^-1), superior to CS powders, and possible antibacterial mechanisms were also summarized. Altogether, dual-purpose TSC-PGMA-MACS microspheres might be promising adsorbent for contaminated water scavenging.

Sulfur rich microporous polymer enables rapid and efficient removal of mercury(II) from water

Design and synthesis of adsorbents for efficient decontamination of hazardous contaminants Hg²⁺ from wastewater, based on a facile and economical strategy, is an attractive target. Here, a novel sulfur rich microporous polymer (sulfur content of 31.4 wt %) with high surface area as well as densely populated sulfur atom with fast accessibility was reported to remove mercury (II) from water. The as prepared polymer (SMP) exhibited high binding affinity, high adsorption capacities, rapid adsorption kinetics, and good recyclability for Hg²⁺. The adsorption capacity of SMP was 595.2 mg g^-1. Furthermore, SMP could reduce trace concentrations of Hg²⁺ from 200 p. p. b. to a level below drinking water standards (2 p. p. b.) within 3 min. This work allows large-scale production of sulfur rich porous materials for the practical application in water treatment.

Fluorescence Regulation of Copper Nanoclusters via DNA Template Manipulation toward Design of a High Signal-to-Noise Ratio Biosensor

Because of bioaccumulation of food chain and disability of biodegradation, concentration of toxic mercury ions (Hg²⁺) in the environment dramatically varies from picomolar to micromolar, indicating the importance of well-performed Hg²⁺ analytical methods. Herein, reticular DNA is constructed by introducing thymine (T)-Hg²⁺-T nodes in poly(T) DNA, and copper nanoclusters (CuNCs) with aggregate morphology are prepared using this reticular DNA as a template. Intriguingly, the prepared CuNCs exhibit enhanced fluorescence. Meanwhile, the reticular DNA reveals evident resistance to enzyme digestion, further clarifying the fluorescence enhancement of CuNCs. Relying on the dual function of DNA manipulation, a high signal-to-noise ratio biosensor is designed. This analytical approach can quantify Hg²⁺ in a very wide range (50 pM to 500 μM) with an ultralow detection limit (16 pM). Besides, depending on the specific interaction between Hg²⁺ and reduced l-glutathione (GSH), this biosensor is able to evaluate the inhibition of GSH toward Hg²⁺. In addition, pollution of Hg²⁺ in three lakes is tested using this method, and the obtained results are in accord with those from inductively coupled plasma mass spectrometry. In general, this work provides an alternative way to regulate the properties of DNA-templated nanomaterials and indicates the applicability of this way by fabricating an advanced biosensor.

Thiourea functionalized β-cyclodextrin as green reducing and stabilizing agent for silver nanocomposites with enhanced antimicrobial and antioxidant properties

Rapid development of microbial resistance against traditional antibiotics has generated a need for the synthesis of new more potent, less toxic, target specific, cost effective and biodegradable antimicrobial agents.

A study on the synthesis and anion recognition of a chitosan-urea receptor

Chitosan-urea receptor for sensing PO₄³⁻ and F⁻ anions.

Carboxyl-Functionalized Ionic Liquid Assisted Preparation of Flexible, Transparent, and Luminescent Chitosan Films as Vapor Luminescent Sensor

Herein we present a novel method to synthesize flexible self-standing films consisting of europium(III) complexes in nanoclay and chitosan, which are transparent and luminescent. Preparation takes place under aqueous conditions assisted by a carboxyl-functionalized ionic liquid (IL). The latter is used not only as a replacement for acetic acid to dissolve chitosan but, surprisingly, also to enhance the luminescence efficiency of the final films. A brighter luminescence is observed for the films prepared assisted with the ionic liquids compared to those by using acetic acid. The reason is that the ionic liquid used to dissolve chitosan can decrease proton strength on embedded platelets primarily through ion-exchange process and thus can increase the coordination number of europium(III) complexes. Exposure of the films to Et3N vapors can cause a further remarkable luminescence enhancement, while significant luminescence quenching occurred upon exposure to HCl vapors. The films are promising for applications in areas such as optoelectronics and vapor-sensitive luminescent sensors.

Chitosan-thiomer stabilized silver nano-composites for antimicrobial and antioxidant applications

The present study involves a microwave assisted, greener synthesis of chitosan thiomer silver nanocomposites via an innocuous thiourea reagent for antimicrobial applications.