Superhydrophobic Coatings with Edible Materials

Minimizing the Use of Per- and Polyfluoroalkyl Substances for Textured Wetting-Resistant Surfaces

Per- and polyfluoroalkyl substances (PFAS) have been used as synthetic chemicals to create textured wetting-resistant surfaces, which have a broad range of applications including omniphobic membranes, self-cleaning textiles, and anticorrosion coatings. However, the high persistence, toxicity, and bioaccumulation potential of PFAS have led to rising public concerns and stringent regulations, especially after the U.S. Environmental Protection Agency (USEPA) announced legally enforceable maximum contamination levels for six PFAS species in April 2024. In this paper, we provide our perspective that the use of PFAS can be avoided in the fabrication of textured omniphobic and superomniphobic surfaces, which display high wetting resistance against not only high surface tension liquids but also more importantly low surface tension liquids. We first discuss the role of PFAS in the design of conventional wetting-resistant surfaces. We then discuss the state-of-the-art strategies for creating PFAS-free textured omniphobic and superomniphobic surfaces with high wetting resistance while elucidating the underlying mechanism. Further, we emphasize that PFAS are indeed not always needed for textured surfaces with a sufficiently high wetting resistance in specific environmental applications such as desalination and wastewater treatment. We envision that this paper will motivate the scientific community to rethink and revolutionize the design framework toward more sustainable wetting-resistant surfaces, thereby circumventing the use of PFAS and the consequent health and environmental risks.

Antibacterial and surface properties of post-light-activated metal-free phthalocyanine-deposited TiO2 nanotube smart surfaces

The utilisation of implantable medical devices has become safer and more prevalent since the establishment of sterilisation methods and techniques a century ago. Nevertheless, device-associated infections remain a significant and growing concern, particularly in light of the continued rise in the number of medical device implantations. This underscores the imperative for the development of efficacious prevention and treatment strategies for device-associated infections, as well as further investigation into the design of innovative antibacterial surfaces for medical device applications. The motivation of this work is to investigate the post-light-activated antibacterial photosensitive surfaces fabricated on medical titanium (Ti) surfaces. Thus, in this work, metal-free phthalocyanine (H2Pc)-deposited TiO2 nanotube (TNT) array smart photosensitive surfaces were fabricated on titanium (Ti) surfaces for medical device applications. First, well-ordered nanotube surfaces were produced on titanium using an anodic oxidation (AO) process. Then, H2Pc was accumulated onto TNT surfaces using a physical vapour deposition (PVD-TE) process. H2Pc-deposited TNT surfaces were fabricated on Ti substrates by combining AO and physical vapour deposition (PVD-TE) processes in this work for the first time in the literature. H2Pc was largely coated onto TNT arrays and exhibited elemental homogeneity throughout the whole surface. The contact angle of H2Pc-deposited TNT surfaces was about 89° whereas other Ti and TNT surfaces demonstrated hydrophilic characteristics. Therefore, they exhibited remarkable hydrophobic behavior in terms of antibacterial properties. Importantly, compared to Ti and TNT surfaces, the bacterial inhibition on sunlight-activated H2Pc-deposited TNT surfaces was 94.9% for S. aureus and 97.3% for E. coli, respectively. According to these results, H2Pc-deposited TNT innovative surfaces provided superior antibacterial activity post-light-activation under sunlight due to their photosensitive character.

Scalable and Durable Superhydrophobic Coating Using Shellac-Based Bioadhesive and Hierarchical Silica Nanoparticles

Superhydrophobic coatings have broad applications across various fields but often face challenges, such as complexity, high cost, low mechanical/thermal stability, toxicity, and environmental hazards. In this study, we demonstrate a simple, scalable, eco-friendly, and durable spray-coating method using bioadhesive shellac and octadecyltrichlorosilane (OTS)-modified silica nanoparticles to create superhydrophobic surfaces. The silica nanoparticles impart superhydrophobicity by forming hierarchical micro/nanostructures and reducing surface free energy, while shellac ensures strong adhesion of the nanoparticles to a wide range of substrates, including nonwoven polypropylene fibers, glass, plastic, metal, wood, cotton, and concrete. The coating exhibits excellent superhydrophobic performance with a large contact angle (162.1°), a small sliding angle (4°), and low contact angle hysteresis (4°). The coated surface retains its superhydrophobicity even after 50 cycles of sandpaper abrasion, heat exposure up to 150 °C, and contact with acidic environments (pH ∼4.2). These biocompatible and eco-friendly superhydrophobic coatings hold promise for use in applications where safety and environmental protection are critical, such as in antifouling, food packaging, and agricultural/biomedical fields.

Eco-friendly self-cleaning coatings: fundamentals, fabrication, applications, and sustainability

Eco-friendly self-cleaning coatings have garnered significant attention due to their potential to address environmental concerns while offering remarkable properties. This review explores the dynamic field of such coatings, focusing on their fundamental principles, fabrication techniques, applications, and sustainability. The main findings of this review shed light on the fundamentals of a wetting phenomenon that underpins superhydrophobicity and self-cleaning, revealing how bio-inspired approaches and sustainable materials have enabled the development of sustainable coatings. This review is structured around the fundamental principles of superhydrophobicity, discussing the basic mechanisms and following different approaches to eco-friendly coatings, focusing on bio-inspired methods and sustainable materials. Next, detailed fabrication techniques are discussed to create such coatings followed by various applications across industries, emphasizing the real-world impact of eco-friendly coatings. The next section discusses the various advantages followed by investigating the environmental implications and discussing how these coatings contribute to sustainability. The review concludes with commercial superhydrophobic self-cleaning products, which reflect the current state of research, outlining the challenges, and providing insights into future directions and innovations in this field. By providing an in-depth analysis of their fabrication techniques, applications, and potential future directions, it serves as a valuable resource for researchers and engineers seeking to design eco-friendly superhydrophobic coatings.

Thermally Degradable Water Diffusion Barrier Assembled by Gelatin and Beeswax toward Edible Electronics

Making ingestible devices edible facilitates diagnosis and therapy inside the body without the risk of retention; however, food materials are generally soft, absorb water molecules, and are not suitable for electronic devices. Here, we fabricated an edible water diffusion barrier film made by gelatin-beeswax composites for the encapsulation of transient electronics. Hydrophobic beeswax and hydrophilic gelatin are inherently difficult to mix; therefore, we created an emulsion simply by raising the temperature high enough to melt the materials and vigorous stirring them. As they cool, the beeswax with a relatively high solidification temperature aggregates and forms microspheres, which increases the gelatin gel's viscoelasticity and immobilizes the emulsion structure in the film. The thermoresponsive gelatin imparts degradability to the barrier and its stickiness also enables transfer of metal patterned electronics. Furthermore, we designed an edible resonator on the film and demonstrated its operation in an abdominal phantom environment; the resonator was made to be degradable in a warm aqueous solution by optimizing the composition ratio of the gelatin and beeswax. Our findings provide insight into criteria for making transient electronics on hydrophilic substrates with hydrophobic water diffusion barriers. This proof-of-concept study expands the potential of operating edible electronics in aqueous environments in harmony with the human body and nature.

The Effect of Fibrillation, Semi-Dry Pressing, and Surface Treatment on the Barrier Properties of Water Molecules and Oxygen on Food Packaging Paper

The characteristics of fiber morphology and paper structure are critical to the barrier properties of food packaging paper. Herein, this study aimed to use pulp fibrillation, paper semi-dry pressing and carboxymethyl starch (CMS) coating to flatten the fibers, which were formed on the paper surface with good barrier properties due to the tight bond between fibers. The results showed that the permeability of paper was reduced by 87.56%, from 81.44 μm/Pa·s to 10.13 μm/Pa·s after the pulp fibrillation treatment (60 °SR). Moreover, semi-dry pressing treatment contributed to decreasing the water vapor transmission coefficient (WVP) by 50.98% to 2.74 × 10-10 g/m·s·Pa, and the oxygen permeation coefficient (OP) decreased by 98.04% to 1.93 × 10-14 cm3·cm/cm2·s·Pa. After coating the paper surface with titanium dioxide (TiO2) and CMS, the WVP of the paper was further reduced to 1.55 × 10-10 g/m·s·Pa, and OP was reduced to 0.19 × 10-14 cm3·cm/cm2·s·Pa. These values were 72.27% and 99.8% lower than those of the original paper, respectively. Therefore, through pulp fibrillation, semi-dry pressing of paper, TiO2 filling, and surface coating with CMS, there is no need to use synthetic polymer surface film-forming agents to achieve the high barrier properties that are required for low water and oxygen molecules permeation in food packaging paper.

Water-Repellent Spray for Textiles Using Plant Waste from Conifer Trees

A superhydrophobic textile coating, applied by using a home drying machine, was developed as an aqueous dispersion of waxes that were extracted from recycled Christmas trees. Because the bulk extraction of waxes yielded a mixture of hydrophobic and hydrophilic compounds, a purification process was tested to determine if removing noncrystallizing wax components would enhance the performance of the coating. The performances of coatings created from the crude and enriched extracts were compared, and no significant difference in hydrophobicity was found. Moreover, although the enriched coating was slightly more breathable, there was not enough of an improvement to justify the additional purification steps, rendering the crude extract more industrially viable. Overall, Christmas tree waxes are readily sourced and are capable of producing superhydrophobic coatings without the need for a costly purification step.

Enhancing biomass production and biochemical compositions of Spirodela polyrhiza through superhydrophobic cultivation platforms at low light intensity

Duckweed, a floating macrophyte, has attracted interest in various fields such as animal feedstocks and bioenergy productions. Its enriched nutritional content and rapid growth rate make it particularly promising. However, common laboratory cultures of duckweed often experience fronds layering, diminishing the efficiency of sunlight capturing due to limited surface area on conventional cultivation platforms. In this work, we aimed to address the issue of fronds layering by introducing a novel cultivation platform - a superhydrophobic coated acrylic sheet. The sheet was prepared by spray-coating a suspension of beeswax and ethanol, and its effectiveness was evaluated by comparing the growth performance of giant duckweed, Spirodela polyrhiza, on this platform with that on a modified version. The superhydrophobic coated acrylic sheet (SHPA) and its variant with a metal mesh added (SHPAM) were employed as growing platforms, with a glass jar serving as the control. The plantlets were grown for 7 days with similar growth conditions under low light stress (25 μmol/m2/s). SHPAM demonstrated superior growth performance, achieving a mass gain of 102.12 ± 17.18 %, surpassing both SHPA (89.67 ± 14.97 %) and the control (39.26 ± 8.94 %). For biochemical compositions, SHPAM outperformed in chlorophyll content, protein content and lipid content. The values obtained were 1.021 ± 0.076 mg/g FW, 14.59 ± 0.58 % DW and 6.21 ± 0.75 % DW respectively. Therefore, this work proved that incorporation of superhydrophobic coatings on a novel cultivation platform significantly enhanced the biomass production of S. polyrhiza. Simultaneously, the biochemical compositions of the duckweeds were well-maintained, showcasing the potential of this approach for optimized duckweed cultivation.

Stable food grade wax/attapulgite superhydrophobic coatings for anti-adhesion of liquid foods

Adhesion of liquid foods on their packaging materials has caused significant food wastes and environment pollution, which has attracted great attention. Food grade superhydrophobic coatings are very promising to solve the issue but suffer from low mechanical stability and complex preparation methods. Herein, a food grade superhydrophobic coating for anti-adhesion of liquid foods was prepared by combining edible paraffin wax, polydimethylsiloxane-modified attapulgite natural nanorods and a food grade silicone adhesive. The concentration of polydimethylsiloxane-modified attapulgite, ultrasonication time and the volume ratio of the paraffin wax/attapulgite suspension to the silicone adhesive solution have great influences on wettability and morphology of the coatings. The coatings exhibit good static and dynamic superhydrophobicity due to their hierarchical micro-/nanostructure and low surface energy of the polydimethylsiloxane-modified attapulgite and paraffin wax. Moreover, the coatings exhibit good mechanical and chemical stability. The coatings are also highly repellent towards various liquid foods including the hot ones. Furthermore, the coatings are applicable onto various frequently used flexible and hard food packing materials including polypropylene, polyethylene terephthalate, aluminium alloy and paper, etc. Thus, the superhydrophobic coatings have great application potential in the food packing industry for anti-adhesion of liquid foods.

Plant-based, aqueous, water-repellent sprays for coating textiles

Novel superhydrophobic coatings, that are both biodegradable and biosourced, have the potential to revolutionize the water-repellent coating industry. Here, water-repellent coatings were prepared from commercially unavailable plant waxes, isolated using solvent extraction and characterized using DSC, GC-MS and DLS. In the first stage, a plant survey was conducted to identify an ideal plant source for the final spray, in which Whatman filter paper was submerged in a wax-solvent solution with recrystallization occurring upon air-drying. In the second stage, aqueous, PFC-free wax dispersions were prepared, coated onto textiles (cotton and polyester), and heat-treated with a home drying machine to allow for the spreading and recrystallization of the waxes. In both stages, SEM visualization verified the coating's morphology, and contact angle measurements showed them to be superhydrophobic. It was concluded that, using less coating material than commercial coatings, high-performing petroleum-free coatings could be made and applied onto textiles of various polarities.

Improvement of tomato yield and quality using slow release NPK fertilizers prepared by carnauba wax emulsion, starch-based latex and hydrogel nanocomposite combination

The modern agriculture is working on introducing new generation of fertilizers that apt to slow down the nutrients release to be more in synchrony with plant's need throughout growth season, enhance fertilizer performance, and decrease nutrient losses into the environment. The aim of this research was to develop an advanced NPK slow-release fertilizer (SRF) and investigate its effect on yield, nutritional and morphological responses of tomato plant (Lycopersicon esculentum Mill.) as a model crop. To this goal, three water-based bio-polymeric formulations including starch-g-poly (acrylic acid-co-acrylamide) nanocomposite hydrogel, starch-g-poly(styrene-co-butylacrylate) latex, and carnauba wax emulsion were synthesized and used for production of NPK-SRF samples. Different samples of coated fertilizers (urea, potassium sulfate, and superphosphate granules) were prepared using different ratios of latex and wax emulsion, and for phosphorus and potash (R-treatment). Moreover, some of coated fertilizers (15 and 30 wt.%) was replaced with nanocomposite hydrogel containing fertilizers, named D and H treatments, respectively. The effect of SRF samples were compared with commercial fertilizers (NPK treatment) and a commercial SRF (T treatment), on the growth of tomato in the greenhouse, at two different levels (100 and 60). The efficiency of all the synthesized formulations were higher than NPK and T treatments, and among them, H100 significantly improved the morphological and physiological characteristics of tomato. For instance, amount of residual elements (nitrogen, phosphorus and potassium) as well as micro elements of calcium, iron and zinc in tomato cultivation bed and accordingly the uptake of these elements in the roots, aerial parts and fruits were increased in the R, H, and D treatments. The highest yield (1671.54 g), highest agricultural agronomy efficiency of fertilizer, and the highest dry matter percentage (9.52%) were obtained in H100. The highest amount of lycopene, antioxidant capacity and vitamin C was also observed in H100. Nitrate accumulation in tomato fruit in the synthesized SRF samples were decreased significantly compared to NPK100, and the lowest amount was observed in H100, which was 55.24% less than NPK100. Accordingly, it is suggested that combination of natural-based nanocomposite hydrogels along with coating latexes and wax emulsions can be a successful method to synthesize efficient NPK-SRF formulations for improvement of crop growth and quality.

Biowaxes from Palm Oil as Promising Candidates for Cosmetic Matrices and Pharmaceuticals for Human Use

The production of waxes from vegetable oils, such as palm oil, for use as a base material in products for human applications is an alternative to those derived from petroleum and animals. Seven palm oil-derived waxes, called biowaxes (BW1-BW7) in this work, were obtained by catalytic hydrotreating of refined and bleached African palm oil and refined palm kernel oil. They were characterized by three properties: compositional, physicochemical (melting point, penetration value, and pH), and biological (sterility, cytotoxicity, phototoxicity, antioxidant, and irritant). Their morphologies and chemical structures were studied by SEM, FTIR, UV-Vis, and ¹H NMR. The BWs presented structures and compositions similar to natural biowaxes (beeswax and carnauba). They had a high concentration of waxy esters (17%-36%) with long alkyl chains (C, 19-26) per carbonyl group, which are related to high melting points (<20-47.9 °C) and low penetration values (2.1-3.8 mm). They also proved to be sterile materials with no cytotoxic, phototoxic, antioxidant, or irritant activity. The biowaxes studied could be used in cosmetic and pharmacological products for human use.

A novel cultivation platform of duckweed (Lemna minor) via application of beeswax superhydrophobic coatings

Conventional establishment of laboratory cultures of duckweed Lemna minor are prepared in beakers, Erlenmeyer flasks or Schott bottles. These conventional cultivation methods limit the available surface area for growth which then causes layering of fronds that reduces the efficiency of plants in sunlight capturing. Here, acrylic sheets were spray-coated with a superhydrophobic (SHP) beeswax suspension and these coated acrylic sheets were used as a novel cultivation platform for L. minor. L. minor was grown for 7 days in conventional glass jar which acted as the control and were compared to SHP coated acrylic (SHPA) and SHP coated acrylic with aluminium mesh centrally placed (SHPAM) at similar duration and cultivation conditions. Addition of mesh was to entrap the plantlets and fixed the plantlets' position on the growing platform. The effects of cultivation platforms on growth rate and biochemical compositions of L. minor were monitored. The highest biomass growth was obtained from SHPA cultivation where the relative growth rate (RGR) was 0.0909 ± 0.014 day^-1 and the RGR was 2.17 times higher than the control. Moreover, L. minor harvested from SHPA displayed the highest values in total protein content, total carbohydrates content and crude lipid percentage. The values were 156.04 ± 12.13 mg/g, 94.75 ± 9.02 mg/g and 7.09 ± 1.14% respectively. However, the control showed the highest total chlorophyll content which was 0.7733 ± 0.042 mg/g FW. Although SHPA obtained a slightly lower chlorophyll content than the control, this growing platform is still promising as it displayed the highest growth rate as well as other biochemical composition. Hence, this study proved that the proposed method that applied superhydrophobic properties in cultivation of L. minor provided a larger surface area for L. minor to grow, which then resulted in a greater biomass production while simultaneously maintaining the quality of the biochemical compositions of duckweeds.

Self-Healing of Biocompatible Superhydrophobic Coatings: The Interplay of the Size and Loading of Particles

The broad application potential of superhydrophobic coatings is limited by the usage of environment-threatening materials and poor durability. The nature-inspired design and fabrication of self-healing coatings is a promising approach for addressing these issues. In this study, we report a fluorine-free and biocompatible superhydrophobic coating that can be thermally healed after abrasion. The coating is composed of silica nanoparticles and carnauba wax, and the self-healing is based on surface enrichment of wax in analogy to the wax secretion in plant leaves. The coating not only exhibits fast self-healing, just in 1 min under moderate heating, but also displays increased water repellency and thermal stability after healing. The rapid self-healing ability of the coating is attributed to the relatively low melting point of carnauba wax and its migration to the surface of the hydrophilic silica nanoparticles. The dependence of self-healing on the size and loading of particles provides insights into the process. Furthermore, the coating exhibits high levels of biocompatibility where the viability of fibroblast L929 cells was ∼90%. The presented approach and insights provide valuable guidelines in the design and fabrication of self-healing superhydrophobic coatings.

Multifunctional Edible Oil-Impregnated Nanoporous Oxide Layer on AISI 304 Stainless Steel

Slippery liquid-infused porous surface (SLIPS) realized on commercial materials provides various functionalities, such as corrosion resistance, condensation heat transfer, anti-fouling, de/anti-icing, and self-cleaning. In particular, perfluorinated lubricants infused in fluorocarbon-coated porous structures have showed exceptional performances with durability; however, they caused several issues in safety, due to their difficulty in degradation and bio-accumulation. Here, we introduce a new approach to create the multifunctional lubricant-impregnated surface with edible oils and fatty acid, which are also safe to human body and degradable in nature. The edible oil-impregnated anodized nanoporous stainless steel surface shows a significantly low contact angle hysteresis and sliding angle, which is similar with general surface of fluorocarbon lubricant-infused systems. The edible oil impregnated in the hydrophobic nanoporous oxide surface also inhibits the direct contact of external aqueous solution to a solid surface structure. Due to such de-wetting property caused by a lubricating effect of edible oils, the edible oil-impregnated stainless steel surface shows enhanced corrosion resistance, anti-biofouling and condensation heat transfer with reduced ice adhesion.

Erythrocyte interaction with titanium nanostructured surfaces

Titanium and its alloys are used to make different medical devices such as stents, artificial heart valves, and catheters for cardiovascular diseases due to their superior biocompatibility. Thrombus formation begins on the surface of these devices as soon as they encounter blood. This leads to the formation of blood clots, which obstructs the flow of blood that leads to severe complications. Recent advancements in nanoscale fabrication and superhydrophobic surface modification techniques have demonstrated that these surfaces have antiadhesive properties and the ability to reduce thrombosis. In this study, the interaction of erythrocytes and whole blood clotting kinetics on superhydrophobic titanium nanostructured surfaces was investigated. These surfaces were characterized for their wettability (contact angle), surface morphology and topography (scanning electron microscopy (SEM)), and crystallinity (glancing angled X-ray diffraction (GAXRD)). Erythrocyte morphology on different surfaces was characterized using SEM, and overall cell viability was demonstrated through fluorescence microscopy. The hemocompatibility of these surfaces was characterized using commercially available assays: thrombin generation assay thrombin generation, hemolytic assay hemolysis, and complement convertase assay complement activity. The results indicate that superhydrophobic titanium nanostructured surfaces had lower erythrocyte adhesion, less morphological changes in adhered cells, lower thrombin generation, lower complement activation, and were less cytotoxic compared to control surfaces. Thus, superhydrophobic titanium nanostructured surfaces may be a promising approach to prevent thrombosis for several medical devices.

Synergistic cellulose-based nanocomposite packaging and cold plasma decontamination for extended saffron preservation

Sterilization of saffron packaging and maintaining the quality of saffron content are the main priorities in saffron preservation. Common modalities do not offer lasting saffron preservation and it is urgent to develop novel packaging approaches from renewable resources and prevent packaging waste. Here, simultaneous decontamination and quality maintenance of saffron is demonstrated, for the first time, through the synergistic application of nano-clay-loaded carboxymethyl cellulose (CMC)/polyvinyl alcohol (PVA) nanocomposites (CNCs) and cold plasmas (CP). Compared to the separate uses of CP and CMC/PVA/nano clay, our results confirm the synergies between CP and CMC/PVA/nano clay cause complete inactivation of Escherichia coli bacteria, while not significantly affecting the concentrations of the essential saffron components (safranal, crocin, and picrocrocin). Overall, the CP-treated CMC/PVA/nano clay fosters saffron preservation, through contamination removal and quality maintenance of the food product. The synergistic application of CP and CMC/PVA/nano clay thus represents a promising strategy for packaging, sterilization, and preservation of high-value food products.

Liquid-Infused Membranes Exhibit Stable Flux and Fouling Resistance

Antifouling membranes that offer excellent operational lifetimes are critical technologies needed to meet the growing demand for clean water. In this study, we demonstrate antifouling membranes featuring an ultrathin oil layer that stayed immobilized on the surface and in the pore walls of poly(vinylidene fluoride) membranes for multiple cycles of operation at industrially relevant transmembrane pressures. An optimized quantity of a commercial Krytox oil with either a low (K103) or a high viscosity (K107) was infused onto the active surface and into the pores of membranes with a 0.45 μm pore size. The presence of the oil layer was qualitatively confirmed using crystal violet staining and variable pressure scanning electron microscopy. Using a dead-end stirred cell, a consistent pure water permeance value of 3000 L m^-2 h^-1 bar^-1 was achieved for the K103 liquid-infused membranes for at least 10 operation cycles, which was expectedly lower than the permeance of bare control membranes (∼16 000 L m^-2 h^-1 bar^-1), suggesting that a stable oil layer was formed on all membrane-active sites. To quantify if oil was lost during membrane operation, extensive thermogravimetric analysis was conducted on both the as-prepared and used membranes. When challenged with the microorganism, Escherichia coli K12, the liquid-infused membranes statistically reduced microbial attachment by ∼50% versus the control membranes. For the first time, we have demonstrated that by forming an immobilized, robust, and stable oil-coated membrane, we can generate high-performance membranes with stable permeance values that can be operated at relevant transmembrane pressures and provide long-lasting antifouling properties.

Manganese-containing Bioactive Glass Enhances Osteogenic Activity of TiO2 Nanotube Arrays

Titanium and its alloys are the most used biomaterials for orthopedic and dental applications. However, up to 10% of these medical devices still fail, mostly due to implant loosening and suboptimal integration at the implant site. The biomaterial surface plays a critical role in promoting osseointegration, which can reduce the risk of device failure. In this study, we propose a novel surface modification on titanium to improve osteogenic differentiation by depositing manganese-containing bioactive glass (BG) on TiO2 nanotube arrays. The surfaces were characterized by scanning electron microscopy, energy dispersive X-ray spectrometer, contact angle goniometry, and X-ray photoelectron spectroscopy. Cell toxicity, viability, adhesion, and proliferation of adipose-derived stem cells on the surfaces were investigated up to 7 days. To evaluate the osteogenic properties of the surfaces, alkaline phosphatase activity, total protein, osteocalcin expression, and calcium deposition were quantified up to 28 days. The results indicate that TiO2 nanotube arrays modified with BG promote cell growth and induce increased osteocalcin and calcium contents when compared to unmodified TiO2 nanotube arrays. The deposition of manganese-containing bioactive glass onto TiO2 nanotubes demonstrates the ability to enhance osteogenic activity on titanium, showing great potential for use in orthopedic and dental implants.

Solvent-free processing of eco-friendly magnetic and superhydrophobic absorbent from all-plant-based materials for efficient oil and organic solvent sorption

The unique features of bioresources such as cellulose and bio-wax include renewability, biodegradability, low cost, and abundance on Earth. Therefore, their efficient use is essential for a sustainable economy. Herein, we report a facile method for the surface modification of pretreated cotton with a bio-wax emulsion in water and Fe₃O₄ nanoparticles to fabricate a green, durable, magnetic, and superhydrophobic/superoleophilic absorbent for the sorption of oil and organic solvents. Magnetic superhydrophobic cotton (MSC) was successfully prepared via a simple two-step dip-coating method without using any toxic organic reagents. The as-prepared MSC was used to selectively absorb various types of oils and organic solvents up to approximately 20-50 times its own weight. Furthermore, it exhibited a stable magnetic responsivity and high reusability in oil/water separation cycles. In addition, the removal and collection of the absorbed oil/organic solvents were easily achieved with distillation and a vacuum air pump. Moreover, the as-prepared MSC was used in a heavy oil/water gravity-separation filter system and in the continuous collection of a light oil from water surfaces using a pump. The proposed concept may provide a green and sustainable strategy for fabricating superhydrophobic/superoleophilic materials for efficient sorption of oils and organic solvents.

Surface modification strategies to improve titanium hemocompatibility: a comprehensive review

Titanium and its alloys are widely used in different biomaterial applications due to their remarkable mechanical properties and bio-inertness. However, titanium-based materials still face some challenges, with an emphasis on hemocompatibility. Blood-contacting devices such as stents, heart valves, and circulatory devices are prone to thrombus formation, restenosis, and inflammation due to inappropriate blood-implant surface interactions. After implantation, when blood encounters these implant surfaces, a series of reactions takes place, such as protein adsorption, platelet adhesion and activation, and white blood cell complex formation as a defense mechanism. Currently, patients are prescribed anticoagulant drugs to prevent blood clotting, but these drugs can weaken their immune system and cause profound bleeding during injury. Extensive research has been done to modify the surface properties of titanium to enhance its hemocompatibility. Results have shown that the modification of surface morphology, roughness, and chemistry has been effective in reducing thrombus formation. The main focus of this review is to analyze and understand the different modification techniques on titanium-based surfaces to enhance hemocompatibility and, consequently, recognize the unresolved challenges and propose scopes for future research.

Superhydrophobic Polymer Composite Surfaces Developed via Photopolymerization

Fabrication of superhydrophobic materials using incumbent techniques involves several processing steps and is therefore either quite complex, not scalable, or often both. Here, the development of superhydrophobic surface-patterned polymer-TiO₂ composite materials using a simple, single-step photopolymerization-based approach is reported. The synergistic combination of concurrent, periodic bump-like pattern formation created using irradiation through a photomask and photopolymerization-induced nanoparticle (NP) phase separation enables the development of surface textures with dual-scale roughness (micrometer-sized bumps and NPs) that demonstrate high water contact angles, low roll-off angles, and desirable postprocessability such as flexibility, peel-and-stick capability, and self-cleaning capability. The effect of nanoparticle concentration on surface porosity and consequently nonwetting properties is discussed. Large-area fabrication over an area of 20 cm², which is important for practical applications, is also demonstrated. This work demonstrates the capability of polymerizable systems to aid in the organization of functional polymer-nanoparticle surface structures.

Fabrication of bioinspired edible liquid marble with phase transition and tunable water barrier property

Based on aphid wax-honeydew marble and the hydrophobic wax structure of lotus and its derived applications with superareophilic and superhydrophobic properties, edible carnauba wax and beeswax particles were mixed and utilized to mimic lotus wax and wrap liquid, thus forming liquid marbles (LMs). Through the utilization of continuous production system (CPS), wax as an interfacial surfactant, water and solid, air-phase or mixed-phase marble content was produced. The edible liquid marble (ELM) could encapsulate water and food droplets. Edible solid marble (ESM) and edible solid hollow marbles (ESHMs) could be fabricated by applying pectin or syrup. Moreover, through the heating of wax powders with different melting temperatures, stable tablets and hollow capsules could be produced. The wax powder as interfacial surfactant could firmly bind with pectin through hydrogen bonds on ESM. The edible LMs can therefore be applied for residue reduction, corrosion reduction, biohazard prevention and cleaning in the food industry. The other phase LMs could act as novel tools in the pharmaceutical and food industries with the above-mentioned water transport, preservation, sustained releasing and selective releasing abilities.

GRAPHIC ABSTRACT

SUPPLEMENTARY INFORMATION

The online version contains supplementary material available at 10.1007/s42242-021-00158-z.

Surface engineering of cellulose film with myristic acid for high strength, self-cleaning and biodegradable packaging materials

Developing sustainable, renewable, hydrophobic, and biodegradable packaging material to replace petroleum-based plastic products remains a challenge. Herein, original cellulose/myristic acid composite films were fabricated by solvent-vaporized controllable crystallization of natural myristic acid on anisotropic cellulose films. The myristic acid crystals that evenly distributed on the surface of cellulose film generated micronano binary structure and the interstitial space between microplates, resulting in high hydrophobicity (water contact angle = 132°) and excellent self-cleaning property of the composite film. The resultant film exhibited good tensile strength and toughness under both dry (188.7 MPa, 34.4 MJ m^-3) and humid conditions (119.9 MPa, 28.7 MJ m^-3). Moreover, these composite films could be degraded completely after approximately 102 days in soil with an average environment temperature of 32 °C. This work provided a low-cost and sustainable pathway for the fabrication of high-strength, self-cleaning, and waterproof packaging materials instead of plastics.

Hydrophobic Interface Starch Nanofibrous Film for Food Packaging: From Bioinspired Design to Self-Cleaning Action

Starch-derived edible food films have great potential as biodegradable food packaging materials because they reduce the overuse of traditional petroleum-based plastic. Herein, we demonstrate a direct method of mass producing a pure starch food packaging film that consisted of starch nanofibers by using a temperature-assisted electrospinning technique without addition of any nonstarch components. To overcome the major issue of ultralow hydrophobicity of starch nanofibrous film (SNF), we used a facile and low-cost solution immersion approach to create a fiber coating of stearic acid (STA) inspired by biological organisms with superhydrophobic properties, such as lotus leaves. Hierarchical flower-like micronanostructures were obtained on SNF by controlled assembly of STA onto the surface of starch nanofibers. Benefiting from the effective formation of STA self-assembled lamella, the multiscale microstructure surface features, low surface energy, and enhancing thermal stability of SNF were obtained and confirmed to result in the variety of its hydrophobicity, which can be also tailored by simple controlling of the solution concentration of STA. Importantly, the STA-self-assembled coated SNF enabled water to roll freely in all directions, which is a crucial factor for self-cleaning. Our novel strategy based on self-assembly can guide development of bioinspired hydrophobic interfaces for starch-based films for edible hydrophobic materials.

Directionally Guided Droplets on a Modular Bottom-Up Anisotropic Locally Ordered Nickel Nanocone Superhydrophobic Surface

The anisotropic surface prepared by the top-down etching technology shows unique advantages in terms of functional superhydrophobicity. However, it still has a shackle of the smallest etching size, which largely restricts the development of better superhydrophobicity. Therefore, it is still a huge challenge to realize the stepless size adjustment of an anisotropic surface in order to achieve better functionalization. In this work, a bottom-up approach inspired via the modular segmented preparation technology has been used to successfully build an anisotropic, locally ordered functionalized unique superhydrophobic structure, whose contact and rebound time of water droplets is extremely short. Furthermore, this structure with artfully arranged "tracks", which has a relatively large contact angle value, not only lasts more than 15 consecutive bounce cycles in the same direction, where the droplets after merging still bounce, but also exhibits a significant anisotropic sliding behavior, which is presented in different sliding angles, toward droplets rolling in different directions and has lower adhesion work and better self-cleaning and anti-fouling performance. Besides, some mechanisms such as the reduction-replacement-reduction cycle and repulsion-adhesion-switching have been proposed especially in modular preparation and anisotropic sliding behavior. More importantly, this sorted bottom-up structure has great potential for achieving higher efficiency of functionalized superhydrophobicity and other related applications.

Liquid-like polymer-based self-cleaning coating for effective prevention of liquid foods contaminations

Liquid food containers commonly suffer from inevitable contamination and even biofilm formation due to the adhesion of food residuals or saliva, which requires detergents to clean. Although previously reported superhydrophobic and omniphobic coatings can resist the adhesion of liquids, the requirements of specific nanostructures or infused lubricants limit their applications in food containers. Here, by grafting smooth glass containers with "liquid like" polydimethylsiloxane brushes, we developed a unique approach for preparing a slippery coating that could exhibit highly robust repellency to various liquid foods. The coating was highly transparent and did not induce a significant alteration of the smooth surface. The "liquid like" coating could effectively prevent the adhesion of various liquid foods and inhibit the formation of bacterial biofilms, without the use of detergents for cleaning. Moreover, this coating could resist mechanical damage from friction, and displayed high biocompatibility with biological cells. The slipperiness, smoothness, robustness and biocompatibility of the "liquid like" coating was highly beneficial to practical applications as self-cleaning glass container, which has been challenging to achieve by conventional superhydrophobic or omniphobic coatings. Our study introduced a versatile strategy to functionalize biocompatible surfaces for food containers which reduced the contamination of residues and the use of detergents, and may be beneficial to human and environmental health.

Tanfloc/heparin polyelectrolyte multilayers improve osteogenic differentiation of adipose-derived stem cells on titania nanotube surfaces

In this study, a surface modification strategy using natural biopolymers on titanium is proposed to improve bone healing and promote rapid and successful osseointegration of orthopedic implants. Titania nanotubes were fabricated via an anodization process and the surfaces were further modified with polyelectrolyte multilayers (PEMs) based on Tanfloc (a cationic tannin derivative) and glycosaminoglycans (heparin and hyaluronic acid). Scanning electron microscopy (SEM), water contact angle measurements, and X-ray photoelectron spectroscopy were used to characterize the surfaces. Adipose-derived stem cells (ADSCs) were seeded on the surfaces, and the cell viability, adhesion, and proliferation were investigated. Osteogenesis was induced and osteogenic differentiation of human ADSCs on the surfaces was evaluated via mineralization and protein expression assays, immunofluorescent staining, and SEM. The Tanfloc/heparin PEMs on titania nanotubes improved the rate of osteogenic differentiation of ADSCs as well as the bone mineral deposition, and is therefore a promising approach for use in orthopedic implants.

Preparation of Edible Non-wettable Coating with Soybean Wax for Repelling Liquid Foods with Little Residue

Liquid food adhesion on containers has increased food waste and pollution, which could be effectively alleviated with a superhydrophobic surface. In this research, the superhydrophobic coating was fabricated with edible soybean wax on different substrates by a spraying method. The coated surface showed excellent superhydrophobicity due to its microstructure formed by self-roughening, which could repel a variety of viscous liquid food with the apparent contact angle of 159 ± 2°. The coated surface was still liquid-repellent after hot water immersion (45 °C), abrasion test with sandpaper, water impact, finger touch and immersion into yogurt. The liquid-repellent coating with soybean wax, which is natural and green, is promising for application in the food industry to reduce waste.

Duarte I, Kayama ME, Rangel EC, Cruz NC. Atmospheric Pressure Plasma Chemical Vapor Deposition of Carvacrol Thin Films on Stainless Steel to Reduce the Formation of E. Coli and S. Aureus Biofilms

In this paper, we have investigated the deposition of thin films from natural carvacrol extract using dielectric barrier discharge (DBD) plasma polymerization, aiming at the inhibition of bacteria adhesion and proliferation. The films deposited on stainless steel samples have been characterized by scanning electron microscopy, infrared reflectance-absorbance spectroscopy, profilometry, and contact angle measurements. Films with thicknesses ranging from 1.5 μm to 3.5 μm presented a chemical structure similar to that of carvacrol. While the formation of biofilm was observed on untreated samples, the coating completely inhibited the adhesion of E. coli and reduced the adhesion of S. aureus biofilm in more than 90%.

Nitrosative Stress and Lipid Homeostasis as a Mechanism for Zileuton Hepatotoxicity and Resistance in Genetically Sensitive Mice

Zileuton is an orally active inhibitor of leukotriene synthesis for maintenance treatment of asthma, for which clinical usage has been associated with idiosyncratic liver injury. Mechanistic understanding of zileuton toxicity is hampered by the rarity of the cases and lack of an animal model. A promising model for mechanistic study of rare liver injury is the Diversity Outbred (J:DO) mouse population, with genetic variation similar to that found in humans. In this study, female DO mice were administered zileuton or vehicle daily for 7 days (i.g.). Serum liver enzymes were elevated in the zileuton group, with marked interindividual variability in response. Zileuton exposure-induced findings in susceptible DO mice included microvesicular fatty change, hepatocellular mitosis, and hepatocellular necrosis. Inducible nitric oxide synthase and nitrotyrosine abundance were increased in livers of animals with necrosis and those with fatty change, implicating nitrosative stress as a possible injury mechanism. Conversely, DO mice lacking adverse liver pathology following zileuton exposure experienced decreased hepatic concentrations of resistin and increased concentrations of insulin and leptin, providing potential clues into mechanisms of toxicity resistance. Transcriptome pathway analysis highlighted mitochondrial dysfunction and altered fatty acid oxidation as key molecular perturbations associated with zileuton exposure, and suggested that interindividual differences in cytochrome P450 metabolism, glutathione-mediated detoxification, and farnesoid X receptor signaling may contribute to zileuton-induced liver injury (ZILI). Taken together, DO mice provided a platform for investigating mechanisms of toxicity and resistance in context of ZILI which may lead to targeted therapeutic interventions.

Gibbsian Thermodynamics of Wenzel Wetting (Was Wenzel Wrong? Revisited)

When a drop is in contact with a rough surface, it can rest on top of the rough features (the Cassie-Baxter state) or it can completely fill the rough structure (the Wenzel state). The contact angle (θ) of a drop in these states is commonly predicted by the Cassie-Baxter or Wenzel equations, respectively, but the accuracy of these equations has been debated. Previously, we used fundamental Gibbsian composite-system thermodynamics to rigorously derive the Cassie-Baxter equation, and we found that the contact line determined the macroscopic contact angle, not the contact area that was originally proposed. Herein, to address the various perspectives on the Wenzel equation, we apply Gibbsian composite-system thermodynamics to derive the complete set of equilibrium conditions (thermal, chemical, and mechanical) for a liquid drop resting on a homogeneous rough solid substrate in the Wenzel mode of wetting. Through this derivation, we show that the roughness must be evaluated at the contact line, not over the whole interfacial area, and we propose a new Wenzel equation for a surface with pillars of equal height. We define a new dimensionless number H = h(1 - λ_solid)/R to quantify when the drop's radius of curvature (R) is large enough compared to the size of the pillars for the new Wenzel equation to be simplified (h is the pillar height; λ_solid is the line fraction of the spherical cap's circumference that is on the pillars). Our new line-roughness Wenzel equation can be simplified to cos θ_W = ρ cos θ_Y when H ≪ 1, where ρ is the line roughness. We also perform a thermodynamic free-energy analysis to determine the stability of the equilibrium states that are predicted by our new Wenzel equation.

A bioinspired lubricant infused surface with transparency, hot liquid boiling resistance and long-term stability for food applications

Inspired by the Nepenthes pitcher plant, the HAP and oleic acid prepared Lubricant Infused Surface (LIS) that exhibits liquid repellency and slipperiness has huge potential in various fields.

Hemocompatibility of Super-Repellent surfaces: Current and Future

Virtually all blood-contacting medical implants and devices initiate immunological events in the form of thrombosis and inflammation. Typically, patients receiving such implants are also given large doses of anticoagulants, which pose a high risk and a high cost to the patient. Thus, the design and development of surfaces with improved hemocompatibility and reduced dependence on anticoagulation treatments is paramount for the success of blood-contacting medical implants and devices. In the past decade, the hemocompatibility of super-repellent surfaces (i.e., surfaces that are extremely repellent to liquids) has been extensively investigated because such surfaces greatly reduce the blood-material contact area, which in turn reduces the area available for protein adsorption and blood cell or platelet adhesion, thereby offering the potential for improved hemocompatibility. In this review, we critically examine the progress made in characterizing the hemocompatibility of super-repellent surfaces, identify the unresolved challenges and highlight the opportunities for future research on developing medical implants and devices with super-repellent surfaces.

Interaction of blood plasma proteins with superhemophobic titania nanotube surfaces

The need to improve blood biocompatibility of medical devices is urgent. As soon as blood encounters a biomaterial implant, proteins adsorb on its surfaces, often leading to several complications such as thrombosis and failure of the device. Therefore, controlling protein adsorption plays a major role in developing hemocompatible materials. In this study, the interaction of key blood plasma proteins with superhemophobic titania nanotube substrates and the blood clotting responses was investigated. The substrate stability was evaluated and fibrinogen adsorption and thrombin formation from plasma were assessed using ELISA. Whole blood clotting kinetics was also investigated, and Factor XII activation on the substrates was characterized by an in vitro plasma coagulation time assay. The results show that superhemophobic titania nanotubes are stable and considerably decrease surface protein adsorption/Factor XII activation as well as delay the whole blood clotting, and thus can be a promising approach for designing blood contacting medical devices.