Copolymer Brushes with Temperature-Triggered, Reversibly Switchable Bactericidal and Antifouling Properties for Biomaterial Surfaces

Development of Dual-Crosslinking N-Isopropylacrylamide-Based Injectable Hydrogel for Transcatheter Embolization in Swine Model

For decades, endovascular embolization (EE) has been a common technique for the treatment of several vascular abnormalities where the affected vessel is occluded using biocompatible embolic agents. In this work, we developed a NIPAAm-based temperature responsive, dual-crosslinking biocompatible and non-toxic injectable hydrogel system as a liquid embolic agent for EE. The swelling and mechanical properties of the hydrogel were tuned and optimized for its in vivo application. The in vivo study was carried out with nine swine models, including three animals for exploratory study and six animals for acute confirmatory study for the occlusion of surgically created aneurysm and rete mirabile. The polymer hydrogel was delivered into the vascular malformation sites using a catheter guided by angiography. After the injection, the liquid embolic agent was transformed into a solid implant in situ via cross-linking through chemical and thermal processes. During the exploratory study, it was observed that one of the three aneurysms and all the RMs were occluded. During the acute confirmatory study, all the aneurysms and the RMs of six animals were successfully occluded. Overall, our study presents the construction and characterization of a novel injectable hydrogel system capable of successfully occluding vascular malformation in large animals. In the future, after further modification and validation, this material may be used as a liquid embolic agent in clinical studies.

Smart drug delivery and responsive microneedles for wound healing

Wound healing is an ongoing concern for the medical community. The limitations of traditional dressings are being addressed by materials and manufacturing technology. Microneedles (MNs) are a novel type of drug delivery system that has been widely used in cancer therapy, dermatological treatment, and insulin and vaccine delivery. MNs locally penetrate necrotic tissue, eschar, biofilm and epidermis into deep tissues, avoiding the possibility of drug dilution and degradation and greatly improving administration efficiency with less pain. MNs represent a new direction for wound treatment and transdermal delivery. In this study, we summarise the skin wound healing process and the mechanical stimulation of MNs in the context of the wound healing process. We also introduce the structural design and manufacture of MNs. Subsequently, MNs are categorised according to the loaded drugs, where the design of the MNs according to the traumatic biological/biochemical microenvironment (pH, glucose, and bacteria) and the physical microenvironment (temperature, light, and ultrasound) is emphasised. Finally, the advantages of MNs are compared with traditional drug delivery systems and their prospects are discussed.

Antimicrobial Biomaterials Based on Physical and Physicochemical Action

Developing effective antimicrobial biomaterials is a relevant and fast-growing field in advanced healthcare materials. Several well-known (e.g., traditional antibiotics, silver, copper etc.) and newer (e.g., nanostructured, chemical, biomimetic etc.) approaches have been researched and developed in recent years and valuable knowledge has been gained. However, biomaterials associated infections (BAIs) remain a largely unsolved problem and breakthroughs in this area are sparse. Hence, novel high risk and potential high gain approaches are needed to address the important challenge of BAIs. Antibiotic free antimicrobial biomaterials that are largely based on physical action are promising, since they reduce the risk of antibiotic resistance and tolerance. Here, selected examples are reviewed such antimicrobial biomaterials, namely switchable, protein-based, carbon-based and bioactive glass, considering microbiological aspects of BAIs. The review shows that antimicrobial biomaterials mainly based on physical action are powerful tools to control microbial growth at biomaterials interfaces. These biomaterials have major clinical and application potential for future antimicrobial healthcare materials without promoting microbial tolerance. It also shows that the antimicrobial action of these materials is based on different complex processes and mechanisms, often on the nanoscale. The review concludes with an outlook and highlights current important research questions in antimicrobial biomaterials.

Bactericidal and Antifouling Coatings with the "Killing-Repelling-Killing" Triple Function Based on Cationic Copolymers with Structure Conversion and Capsaicin Analogue Release

The capsaicin analogue N-(4-hydroxy-3-methoxybenzyl) acrylamide (HMBA) was linked with polylauryl methacrylate-b-poly(2-(N,N-dimethylamino)ethyl methacrylate) (PLMA-b-PDMAEMA) via a quaternization reaction with 4-(acrylamidomethyl)-2-methoxyphenyl 2-chloroacetate (AAMPCA). The amphiphilic copolymers were capable of transforming its structure in response to the solvent change from aprotic to protic, which was verified by the 1H NMR spectrum. The resulting cationic copolymers underwent a hydrolysis process in water, yielding zwitterionic groups on surfaces. Meanwhile, the bactericidal reagent HMBA was released. It was proved that the hydrolysis rate of the copolymers accelerated with higher temperature, higher pH value, and higher hydrophilic block units. And the controllable, sustainable release of HMBA was achieved with copolymer-mediated hydrolysis. Protein-repellent and bactericidal tests on the surface of the coating proved that antifouling and bactericidal performances of the coating correlated to the structure conversion abilities of the corresponding copolymer. The dynamic monitoring of Escherichia coli adhesion in 3 h evidenced the antifouling and bactericidal process of copolymers with different block ratios and concentrations. The coating incorporated with 3% PLMA120-b-(PDMAEMA-AAMPCA)120 in polylactic acid base materials showed an adhesion ratio of E. coli less than 1% within 1 h, and the survival ratio of the adhered bacteria is <1%, suggesting its rapid speed and high efficiency in "bacterial repelling and killing". Also, the PLMA120-b-(PDMAEMA-AAMPCA)120 copolymer demonstrated enhanced bactericidal ability compared with the mixture of cationic poly(laruyl methacrylate)120-b-poly(carboxybetaine methacrylate ester)120 (PLMA120-b-PCBMAE120) and free HMBA. The lowest minimal inhibitory concentration was 0.078 mg/mL against Staphylococcus aureus and 0.312 mg/mL against E. coli, respectively.

Steps Toward Recapitulating Endothelium: A Perspective on the Next Generation of Hemocompatible Coatings

Endothelium, the lining in this blood vessel, orchestrates three main critical functions such as protecting blood components, modulating of hemostasis by secreting various inhibitors, and directing clot digestion (fibrinolysis) by activating tissue plasminogen activator. No other surface can perform these tasks; thus, the contact of blood and blood-contacting medical devices inevitably leads to the activation of coagulation, often causing device failure, and thromboembolic complications. This perspective, first, discusses the biological mechanisms of activation of coagulation and highlights the efforts of advanced coatings to recapitulate one characteristic of endothelium, hereafter single functions of endothelium and noting necessity of the synergistic integration of its three main functions. Subsequently, it is emphasized that to overcome the challenges of blood compatibility an endothelium-mimicking system is needed, proposing a synergy of bottom-up synthetic biology, particularly synthetic cells, with passive- and bioactive surface coatings. Such integration holds promise for developing advanced biomaterials capable of recapitulating endothelial functions, thereby enhancing the hemocompatibility and performance of blood-contacting medical devices.

Antimicrobial Polymer Surfaces Containing Quaternary Ammonium Centers (QACs): Synthesis and Mechanism of Action

Synthetic polymer surfaces provide an excellent opportunity for developing materials with inherent antimicrobial and/or biocidal activity, therefore representing an answer to the increasing demand for antimicrobial active medical devices. So far, biologists and material scientists have identified a few features of bacterial cells that can be strategically exploited to make polymers inherently antimicrobial. One of these is represented by the introduction of cationic charges that act by killing or deactivating bacteria by interaction with the negatively charged parts of their cell envelope (lipopolysaccharides, peptidoglycan, and membrane lipids). Among the possible cationic functionalities, the antimicrobial activity of polymers with quaternary ammonium centers (QACs) has been widely used for both soluble macromolecules and non-soluble materials. Unfortunately, most information is still unknown on the biological mechanism of action of QACs, a fundamental requirement for designing polymers with higher antimicrobial efficiency and possibly very low toxicity. This mini-review focuses on surfaces based on synthetic polymers with inherently antimicrobial activity due to QACs. It will discuss their synthesis, their antimicrobial activity, and studies carried out so far on their mechanism of action.

Fighting against biofilm: The antifouling and antimicrobial material

Biofilms are groups of microorganisms protected by self-secreted extracellular substances. Biofilm formation on the surface of biomaterial or engineering materials becomes a severe challenge. It has caused significant health, environmental, and societal concerns. It is believed that biofilms lead to life-threatening infection, medical implant failure, foodborne disease, and marine biofouling. To address these issues, tremendous effort has been made to inhibit biofilm formation on materials. Biofilms are extremely difficult to treat once formed, so designing material and coating bearing functional groups that are capable of resisting biofilm formation has attracted increasing attention for the last two decades. Many types of antibiofilm strategies have been designed to target different stages of biofilm formation. Development of the antibiofilm material can be classified into antifouling material, antimicrobial material, fouling release material, and integrated antifouling/antimicrobial material. This review summarizes relevant research utilizing these four approaches and comments on their antibiofilm properties. The feature of each method was compared to reveal the research trend. Antibiofilm strategies in fundamental research and industrial applications were summarized.

Leveraging novel innovative thermoresponsive polymers in microneedles for targeted intradermal deposition

Microneedles have garnered considerable attention over the years as a versatile pharmaceutical platform that could be leveraged to deliver drugs into and across the skin. In the current work, poly (N-isopropylacrylamide) (PNIPAm) is synthesized and characterized as a novel material for the development of a physiologically responsive microneedle-based drug delivery system. Typically, this polymer transitions reversibly between a swell state at lower temperatures and a more hydrophobic state at higher temperatures, enabling precise drug release. This study demonstrates that dissolving microneedles patches made from PNIPAm, incorporating BIS-PNIPAm, a crosslinked polymer variant, exhibit enhanced mechanical properties, evident from a smaller height reduction in microneedle (∼10 %). Although microneedles using PNIPAm alone were achievable, it displayed poor mechanical strength, requiring the inclusion of additional polymeric excipients like PVA to enhance mechanical properties. In addition, the incorporation of a thermoresponsive polymer did not have a significant (p > 0.05) impact on the insertion properties of the needles as all formulations inserted to a similar depth of 500 µm into ex vivo skin. Furthering this, the needles were loaded with a model payload, 1,1'-dioctadecyl-3,3,3',3'-tetramethylindodicarbocyanine perchlorate (DID) and the deposition of the cargo was monitored via multiphoton microscopy that showed that a deposit is formed at a depth of ≈200 µm. Also, it was revealed that crosslinked-PNIPAm (Bis-PNIPAm) formulations exhibited notable skin accumulationof the dye only after 4 h, independent of the excipient matrix used. This phenomenon was absent in non-crosslinked PNIPAm formulations, indicating a deposit formation in Bis-PNIPAm microneedle formulation. Collectively, this proof-of-concept study has advanced our understanding on the possibility to use PNIPAm for dissolving microneedle fabrication which could be harnessed for the deposition of nanoparticles into the dermis, for extended drug release within the skin.

Recent Progress in antibacterial hydrogel coatings for targeting biofilm to prevent orthopedic implant-associated infections

The application of orthopedic implants for bone tissue reconstruction and functional restoration is crucial for patients with severe bone fractures and defects. However, the abiotic nature of orthopedic implants allows bacterial adhesion and colonization, leading to the formation of bacterial biofilms on the implant surface. This can result in implant failure and severe complications such as osteomyelitis and septic arthritis. The emergence of antibiotic-resistant bacteria and the limited efficacy of drugs against biofilms have increased the risk of orthopedic implant-associated infections (OIAI), necessitating the development of alternative therapeutics. In this regard, antibacterial hydrogels based on bacteria repelling, contact killing, drug delivery, or external assistance strategies have been extensively investigated for coating orthopedic implants through surface modification, offering a promising approach to target biofilm formation and prevent OIAI. This review provides an overview of recent advancements in the application of antibacterial hydrogel coatings for preventing OIAI by targeting biofilm formation. The topics covered include: (1) the mechanisms underlying OIAI occurrence and the role of biofilms in exacerbating OIAI development; (2) current strategies to impart anti-biofilm properties to hydrogel coatings and the mechanisms involved in treating OIAI. This article aims to summarize the progress in antibacterial hydrogel coatings for OIAI prevention, providing valuable insights and facilitating the development of prognostic markers for the design of effective antibacterial orthopedic implants.

Anti-Fouling Properties of Phosphonium Ionic Liquid Coatings in the Marine Environment

Biofouling is the buildup of marine organisms on a submerged material. This research tests the efficacy of phosphonium ion gels comprising phosphonium monomers ([P444VB][AOT] and [P888VB][AOT]) and free ionic liquid ([P4448][AOT], [P88814][AOT]) (10 to 50 wt%), varying copper(II) oxide biocide concentrations (0 to 2 wt%), and the docusate anion [AOT]- for added hydrophobicity. The efficacy of these formulations was tested using a seachest simulator protected from light and tidal currents in New Zealand coastal waters over the summer and autumn periods. Anti-fouling performance was correlated with the hydrophobicity of the surface (water contact angle: 14-131°) and biocide concentration. Formulations with higher hydrophobicity (i.e., less free ionic liquid and longer alkyl chain substituents) displayed superior anti-fouling performance. The presence of the copper(II) biocide negatively affected anti-fouling performance via significant increases to hydrophilicity. No correlation was observed between antimicrobial activity and anti-fouling performance. Overall, phosphonium ion gels show potential for combining anti-fouling and foul release properties.

Smart Copolymer Surface Derived from Geminized Cationic Amphiphilic Polymers for Reversibly Switchable Bactericidal and Self-Cleaning Abilities

Bacterial adhesion and colonization on material surfaces pose a serious problem for healthcare-associated devices. Cationic amphiphilic polymer brushes are usually used as surface coatings in antibacterial materials to endow an interface with excellent bactericidal efficiency, but they are easily contaminated, which puts a great limitation on their application. Herein, novel antibacterial copolymer brush surfaces containing geminized cationic amphiphilic polymers (pAGC₈) and thermoresponsive poly(N-isopropylacrylamide) polymers (pNIPAm) have been synthesized. Surface functionalization of polymer brushes was investigated by X-ray photoelectron spectroscopy, spectroscopic ellipsometry, atomic force microscopy, and water contact angle measurements. A proportion of AGC₈ and NIPAm units in copolymer brushes has been adjusted to obtain a high-efficiency bactericidal surface with minimal interference to its self-cleaning property. The killing and releasing efficiency of the optimized surface simultaneously reached up to above 80% for both Staphylococcus aureus and Escherichia coli bacteria, and the bactericidal and self-cleaning abilities are still excellent even after three kill-release cycles. Such a novel copolymer brush system provides innovative guidance for the development of high-efficiency antibacterial materials in biomedical application.

Dual functional antifouling and bactericidal proteinaceous coating

Coatings with both anti-fouling and bactericidal functions are used in many fields. In this work, lysozyme (Lyso) and poly (2-Methylallyloxyethyl phosphorylcholine) (PMPC) conjugate (Lyso-PMPC) is successfully designed and synthesized for the first time. A new nanofilm (PTL-PMPC) is then obtained by phase transition of lysozyme via the reduction of disulfide bonds in Lyso-PMPC. Benefit from lysozyme amyloid-like aggregates as surface anchors, the nanofilm shows excellent stability, it remains unchanged after treatment under extreme conditions such as ultrasonic and 3 M tape peeling. Due to the presence of zwitterionic polymer (PMPC) brush, the PTL-PMPC film has excellent antifouling properties against cell, bacterium, fungi, proteins, biofluids, phosphatide, polyose, esters, and carbohydrates. Meanwhile, the PTL-PMPC film is colourless and transparent. Further, a new coating (PTL-PMPC/PHMB) is fabricated by hybridizing PTL-PMPC with poly (hexamethylene biguanide) (PHMB). This coating had excellent antibacterial properties, and the antibacterial rate against Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli) is more than 99.99%. In addition, the coating exhibit good hemocompatibility and low cytotoxicity.

Tailoring a UCST-LCST-pH Multiresponsive Window through a Single Polymer Complex of Chitosan-Hyaluronic Acid

Multistimuli-responsive polymers are important for controlled release. Owing to the fact that these polymers are derived from vinyl-based monomers, their decoration with other molecules is limited. Polysaccharides, especially chitosan (CS) and hyaluronic acid (HA), are pH-responsive biopolymers, whose chemical structures contain reactive functional groups for feasible chemical modifications to obtain add-on functions. The present work demonstrates the introduction of polymers with upper critical solution temperature (UCST) and lower critical solution temperature (LCST) performances onto CS and HA, respectively. By simply varying the mole ratio between the CS-containing UCST polymer and the HA-containing LCST polymer along with adjusting the pH, a polymer system with a UCST-LCST-pH multiresponsive window can be obtained. This multiresponsive window enables us to control the encapsulation and release with repeatability as evidenced from a model study on lysozyme. The present work, for the first time, shows a simple approach to obtain multiresponsive biodegradable polymers through the formation of a single polymer complex to tailor a specific multiresponsive window.

Temperature-Responsive Polymer Brush Coatings for Advanced Biomedical Applications

Modern biomedical technologies predict the application of materials and devices that not only can comply effectively with specific requirements, but also enable remote control of their functions. One of the most prospective materials for these advanced biomedical applications are materials based on temperature-responsive polymer brush coatings (TRPBCs). In this review, methods for the fabrication and characterization of TRPBCs are summarized, and possibilities for their application, as well as the advantages and disadvantages of the TRPBCs, are presented in detail. Special attention is paid to the mechanisms of thermo-responsibility of the TRPBCs. Applications of TRPBCs for temperature-switchable bacteria killing, temperature-controlled protein adsorption, cell culture, and temperature-controlled adhesion/detachment of cells and tissues are considered. The specific criteria required for the desired biomedical applications of TRPBCs are presented and discussed.

Poly(N-isopropylacrylamide)-Based Hydrogels for Biomedical Applications: A Review of the State-of-the-Art

A prominent research topic in contemporary advanced functional materials science is the production of smart materials based on polymers that may independently adjust their physical and/or chemical characteristics when subjected to external stimuli. Smart hydrogels based on poly(N-isopropylacrylamide) (PNIPAM) demonstrate distinct thermoresponsive features close to a lower critical solution temperature (LCST) that enhance their capability in various biomedical applications such as drug delivery, tissue engineering, and wound dressings. Nevertheless, they have intrinsic shortcomings such as poor mechanical properties, limited loading capacity of actives, and poor biodegradability. Formulation of PNIPAM with diverse functional constituents to develop hydrogel composites is an efficient scheme to overcome these defects, which can significantly help for practicable application. This review reports on the latest developments in functional PNIPAM-based smart hydrogels for various biomedical applications. The first section describes the properties of PNIPAM-based hydrogels, followed by potential applications in diverse fields. Ultimately, this review summarizes the challenges and opportunities in this emerging area of research and development concerning this fascinating polymer-based system deep-rooted in chemistry and material science.

Temperature-triggered fluorocopolymer aggregate coating switching from antibacterial to antifouling and superhydrophobic hemostasis

The multifunction antibacterial hemostatic materials can reduce blood loss, infection and wound complications, which probably decrease morbidity and health care costs. However, the contradictory relationship between antibacterial ability and biocompatibility, and the unnecessary blood loss restricts the practical application of hydrophilic cationic antibacterial hemostatic materials. Herein, a multifunctional temperature-triggered antibacterial hemostatic fluorocopolymer aggregate coating was developed. After self-assembly and quaternization process, the quaternized poly(N,N-dimethylaminoethylmethacrylate)-b-poly(1H,1H,2H,2H-heptadecafluorodecyl acrylate) block copolymers (PDMA-b-PFOEMA) aggregate coating consisting of fluoropolymer and quaternary ammonium salt were built. The synergistic effect on fluorinated block with low surface energy and quaternary ammonium salt block with bactericide activity severs the way of initial bacterial attachment and proliferation, while the migration of fluorinated block greatly promotes the biocompatibility and anti-adhesion performance in response to the switch from room temperature to physiological temperature. Furthermore, the fluorocopolymer aggregate coating with hydrophobic properties possessed the property of rapid coagulation, low blood loss, minor secondary bleeding and least bacteria infiltration. The multifunctional temperature-triggered fluorocopolymer aggregate coating with antifouling, antibacterial and hemostatic properties may have a great potential in the biomedical application.

Cyanobacteria-based self-oxygenated photodynamic therapy for anaerobic infection treatment and tissue repair

Photodynamic therapy (PDT) is an important technique to deal with drug-resistant bacterial infections in the post-antibiotic era. However, the hypoxic environment in intractable infections such as refractory keratitis and periodontitis, makes PDT more difficult. In this work, spontaneous oxygen-producing cyanobacteria were used as the carrier of photosensitizer (Ce6), and ultrasmall Cu5.4O nanoparticles (Cu5.4O USNPs) with catalase activity for infection and inflammation elimination and rapid tissue repair (CeCycn-Cu5.4O). The loading of Ce6 and Cu5.4O USNPs onto cyanobacteria surface were confirmed by transmission electron microscopy, nano particle size analyzer, scanning electron microscopy. In vitro sterilization and biofilm removal experiments demonstrated that the restriction of hypoxic environment to PDT was significantly alleviated due to the oxygen production of cyanobacteria. Under laser irradiation, the close transfer of energy photons to oxygen produced by cyanobacteria reduced more than 90% of Ce6 dosages (660 nm, 200 mW/cm2, 2 min). It is worth mentioning that both rapid sterilization through PDT and long-term oxidized free radicals elimination were achieved by adjusting the ratio of Ce6 and Cu5.4O USNPs. Both periodontitis and refractory keratitis animal models proved the excellent self-oxygenation enhanced antibacterial property and promotion of tissue repair.

Thermoresponsive Nanostructures: From Mechano-Bactericidal Action to Bacteria Release

Overuse of antibiotics can increase the risk of notorious antibiotic resistance in bacteria, which has become a growing public health concern worldwide. Featured with the merit of mechanical rupture of bacterial cells, the bioinspired nanopillars are promising alternatives to antibiotics for combating bacterial infections while avoiding antibacterial resistance. However, the resident dead bacterial cells on nanopillars may greatly impair their bactericidal capability and ultimately impede their translational potential toward long-term applications. Here, we show that the functions of bactericidal nanopillars can be significantly broadened by developing a hybrid thermoresponsive polymer@nanopillar-structured surface, which retains all of the attributes of pristine nanopillars and adds one more: releasing dead bacteria. We fabricate this surface through coaxially decorating mechano-bactericidal ZnO nanopillars with thermoresponsive poly(N-isopropylacrylamide) (PNIPAAm) brushes. Combining the benefits of ZnO nanopillars and PNIPAAm chains, the antibacterial performances can be controllably regulated between ultrarobust mechano-bactericidal action (∼99%) and remarkable bacteria-releasing efficiency (∼98%). Notably, both the mechanical sterilization against the live bacteria and the controllable release for the pinned dead bacteria solely stem from physical actions, stimulating the exploration of intelligent structure-based bactericidal surfaces with persistent antibacterial properties without the risk of triggering drug resistance.

Synthesis, classification and properties of hydrogels: their applications in drug delivery and agriculture

Absorbent polymers or hydrogel polymer materials have an enhanced water retention capacity and are widely used in agriculture and medicine. The controlled release of bioactive molecules (especially drug proteins) by hydrogels and the encapsulation of living cells are some of the active areas of drug discovery research. Hydrogel-based delivery systems may result in a therapeutically advantageous outcome for drug delivery. They can provide various sequential therapeutic agents including macromolecular drugs, small molecule drugs, and cells to control the release of molecules. Due to their controllable degradability, ability to protect unstable drugs from degradation and flexible physical properties, hydrogels can be used as a platform in which various chemical and physical interactions with encapsulated drugs for controlled release in the system can be studied. Practically, hydrogels that possess biodegradable properties have aroused greater interest in drug delivery systems. The original three-dimensional structure gets broken down into non-toxic substances, thus confirming the excellent biocompatibility of the gel. Chemical crosslinking is a resource-rich method for forming hydrogels with excellent mechanical strength. But in some cases the crosslinker used in the synthesis of the hydrogels may cause some toxicity. However, the physically cross-linked hydrogel preparative method is an alternative solution to overcome the toxicity of cross-linkers. Hydrogels that are responsive to stimuli formed from various natural and synthetic polymers can show significant changes in their properties under external stimuli such as temperature, pH, light, ion changes, and redox potential. Stimulus-responsive hydrogels have a wider range of applications in biomedicine including drug delivery, gene delivery and tissue regeneration. Stimulus-responsive hydrogels loaded with multiple drugs show controlled and sustained drug release and can act as drug carriers. By integrating stimulus-responsive hydrogels, such as those with improved thermal responsiveness, pH responsiveness and dual responsiveness, into textile materials, advanced functions can be imparted to the textile materials, thereby improving the moisture and water retention performance, environmental responsiveness, aesthetic appeal, display and comfort of textiles. This review explores the stimuli-responsive hydrogels in drug delivery systems and examines super adsorbent hydrogels and their application in the field of agriculture.

One-step zwitterionization and quaternization of thick PDMAEMA layer grafted through subsurface-initiated ATRP for robust antibiofouling and antibacterial coating on PDMS

In this work, we demonstrate the grafting of thick poly((2-dimethylamino) ethyl methacrylate) (PDMAEMA) layer on PDMS via subsurface-initiated atom transfer radical polymerization (SSI-ATRP). The self-migration of DMAEMA monomers into the subsurface of PDMS is proven to be the dominant factor for the success of SSI-ATRP. The as-prepared thick microscale graft layer on PDMS shows much better abrasion resistance than nanoscale graft layer obtained by conventional surface-initiated atom transfer radical polymerization (SI-ATRP) under identical condition. Taking advantage of the tertiary amines of PDMAEMA, the simultaneous zwitterionization and quaternization of the PDMAEMA thick layer is realized through a facile one-step process. The effect of zwitterionization and quaternization degree on the antibiofouling and antibacterial properties is investigated. The results show that a relatively high zwitterionization degree (75 mol%) and a low quaternization degree (25 mol%) exhibit a good well-balanced effect on both fouling repellence and bactericidal activity. This work may lead to the development of robust bifunctional antibiofouling and antibacterial surfaces via SSI-ATRP strategy.

Fitting pieces into the puzzle: The impact of titanium-based dental implant surface modifications on bacterial accumulation and polymicrobial infections

Polymicrobial infection is the main cause of dental implant failure. Although numerous studies have reported the ability of titanium (Ti) surface modifications to inhibit microbial adhesion and biofilm accumulation, the majority of solutions for the utilization of Ti antibacterial surfaces have been testedin in vitro and animal models, with only a few developed surfaces progressing into clinical research. Motivated by this huge gap, we critically reviewed the scientific literature on the existing antibacterial Ti surfaces to help understand these surfaces' impact on the "puzzle" of undesirable dental implant-related infections. This manuscript comprises three main sections: (i) a narrative review on topics related to oral biofilm formation, bacterial-implant surface interactions, and on how implant-surface modifications can influence microbial accumulation; (ii) a critical evidence-based review to summarize pre-clinical and clinical studies in an attempt to "fit pieces into the puzzle" to unveil the best way to reduce microbial loads and control polymicrobial infection around dental implants showed by the current in vivo evidence; and (iii) discussion and recommendations for future research testing emerging antibacterial implant surfaces, connecting basic science and the requirements for future clinical translation. The findings of the present review suggest no consensus regarding the best available Ti surface to reduce bacterial colonization on dental implants. Smart release or on-demand activation surface coatings are a "new piece of the puzzle", which may be the most effective alternative for reducing microbial colonization on Ti surfaces, and future studies should focus on these technologies.

A Synthetic Overview of Preparation Protocols of Nonmetallic, Contact-Active Antimicrobial Quaternary Surfaces on Polymer Substrates

Antibacterial surfaces have been researched for more than 30 years and remain highly desirable. In particular, there is an interest in providing antimicrobial properties to commodity plastics, because these, in their native state, are excellent substrates for pathogens to adhere and proliferate on. Therefore, efficient strategies for converting surfaces of commodity plastics into contact-active antimicrobial surfaces are of significant interest. Many systems have been prepared and tested for their efficacy. Here, the synthetic approaches to such active surfaces are reviewed, with the restriction to only include systems with tested antibacterial properties. The review focuses on the synthetic approach to surface functionalization of the most common materials used and tested for biomedical applications, which effectively has limited the study to quaternary materials. For future developments in the field, it is evident that there is a need for development of simple methods that permit scalable production of active surfaces. Furthermore, in terms of efficacy, there is an outstanding concern of a lack of universal antimicrobial action as well as rapid deactivation of the antibacterial effect through surface fouling.

Smart Bionic Surfaces with Switchable Wettability and Applications

In order to satisfy the needs of different applications and more complex intelligent devices, smart control of surface wettability will be necessary and desirable, which gradually become a hot spot and focus in the field of interface wetting. Herein, we review interfacial wetting states related to switchable wettability on superwettable materials, including several classical wetting models and liquid adhesive behaviors based on the surface of natural creatures with special wettability. This review mainly focuses on the recent developments of the smart surfaces with switchable wettability and the corresponding regulatory mechanisms under external stimuli, which is mainly governed by the transformation of surface chemical composition and geometrical structures. Among that, various external stimuli such as physical stimulation (temperature, light, electric, magnetic, mechanical stress), chemical stimulation (pH, ion, solvent) and dual or multi-triggered stimulation have been sought out to realize the regulation of surface wettability. Moreover, we also summarize the applications of smart surfaces in different fields, such as oil/water separation, programmable transportation, anti-biofouling, detection and delivery, smart soft robotic etc. Furthermore, current limitations and future perspective in the development of smart wetting surfaces are also given. This review aims to offer deep insights into the recent developments and responsive mechanisms in smart biomimetic surfaces with switchable wettability under external various stimuli, so as to provide a guidance for the design of smart surfaces and expand the scope of both fundamental research and practical applications.

Host-Guest Interaction-Mediated Photo/Temperature Dual-Controlled Antibacterial Surfaces

Development of smart switchable surfaces to solve the inevitable bacteria attachment and colonization has attracted much attention; however, it proves very challenging to achieve on-demand regeneration for noncontaminated surfaces. We herein report a smart, host-guest interaction-mediated photo/temperature dual-controlled antibacterial surface, topologically combining stimuli-responsive polymers with nanobactericide. From the point of view of long-chain polymer design, the peculiar hydration layer generated by hydrophilic poly(2-hydroxyethyl methacrylate) (polyHEMA) segments severs the route of initial bacterial attachment and subsequent proliferation, while the synergistic effect on chain conformation transformation poly(N-isopropylacrylamide) (polyNIPAM) and guest complex dissociation azobenzene/cyclodextrin (Azo/CD) complex greatly promotes the on-demand bacterial release in response to the switch of temperature and UV light. Therefore, the resulting surface exhibits triple successive antimicrobial functions simultaneously: (i) resists ∼84.9% of initial bacterial attachment, (ii) kills ∼93.2% of inevitable bacteria attack, and (iii) releases over 94.9% of killed bacteria even after three cycles. The detailed results not only present a potential and promising strategy to develop renewable antibacterial surfaces with successive antimicrobial functions but also contribute a new antimicrobial platform to biomedical or surgical applications.

Reversible antibiotic loading and pH-responsive release from polymer brushes on contact lenses for therapy and prevention of corneal infections

Corneal infection is an important cause of corneal damage and vision loss. In this work, polyhydroxy antibiotics were grafted onto polymer brush-modified contact lenses through dynamic chemical bonds between polyphenolic hydroxyls and phenylboronic acid. Both in vitro and in vivo antibacterial tests demonstrated great promise in the prevention of bacterial keratitis, which could be attributed to the enhanced retention time and drug bioavailability.

Improved antifouling properties of PVA hydrogel via an organic semiconductor graphitic carbon nitride catalyzed surface-initiated photo atom transfer radical polymerization

An innovative g-C₃N₄ catalyzed surface-initiated photo atom transfer radical polymerization (SI-photoATRP) has been developed to construct MEDSAH zwitterionic polymer brushes on PVA hydrogel surface. g-C₃N₄ catalyzed SI-photoATRP is temporal and spatial control. As a heterogeneous reaction system, it can solve the catalyst residues problem. After grafting with MEDSAH, surface chemical composition and morphology of PVA-g-pMEDSAH hydrogel confirmed that MEDSAH was successfully grafted onto PVA hydrogel. Thermal property of PVA-g-pMEDSAH hydrogel decreased and hydrophilicity increased. No statistically significant differences between PVA and PVA-g-pMEDSAH were observed on mechanical properties. Cytotoxicity in vitro of PVA-g-pMEDSAH hydrogel could be considered as no cytotoxicity for L929 and NDHF cells. The antifouling properties of PVA-g-pMEDSAH hydrogel were significantly improved due to the enhancement of the surface hydration and steric repulsion effects caused by pMEDSAH polymer brushes. In addition, g-C₃N₄ is easier to modify to enhance the photocatalyst property. Thus, the heterogeneous reaction system of g-C₃N₄ catalyzed SI-photoATRP has huge potential applied in biomaterials surface modification.

Polymeric antibacterial materials: design, platforms and applications

Over the past decades, the morbidity and mortality caused by pathogen invasion remain stubbornly high even though medical care has increasingly improved worldwide. Besides, impacted by the ever-growing multidrug-resistant bacterial strains, the crisis owing to the abuse and misuse of antibiotics has been further exacerbated. Among the wide range of antibacterial strategies, polymeric antibacterial materials with diversified synthetic strategies exhibit unique advantages (e.g., their flexible structural design, processability and recyclability, tuneable platform construction, and safety) for extensive antibacterial fields as compared to low molecular weight organic or inorganic antibacterial materials. In this review, polymeric antibacterial materials are summarized in terms of four structure styles and the most representative material platforms to achieve specific antibacterial applications. The superiority and defects exhibited by various polymeric antibacterial materials are elucidated, and the design of various platforms to elevate their efficacy is also described. Moreover, the application scope of polymeric antibacterial materials is summarized with regard to tissue engineering, personal protection, and environmental security. In the last section, the subsequent challenges and direction of polymeric antibacterial materials are discussed. It is highly expected that this critical review will present an insight into the prospective development of antibacterial functional materials.

Effect of alkyl chain length and fluorine content on the surface characteristics and antibacterial activity of surfaces grafted with brushes containing quaternized ammonium and fluoro-containing monomers

Although considerable efforts have been made to vary the alkyl chain length in the quaternary ammonium compounds (QACs) for optimizing the antibacterial activity, only few researchers have systematically investigated the combinatory effects of alkyl chain length and another acryl monomers with the different chemical configuration on the antibacterial activity of the modified substrate. In this study, by surface grafting of various copolymeric brushes, different modified cotton substrates were prepared by surface-initiated reversible addition-fragmentation chain transfer (RAFT) polymerization reaction for exploring the effects of alkyl chain length of QACs and the fluorine content on antibacterial and anti-microbial adhesion characteristics. The quaternized monomers used were prepared by quaternization of 2-(dimethylamino) ethyl methacrylate (DMAEMA) with 1-bromooctane (DMAEMA + 8), and 1-bromopropane (DMAEMA + 3). The fluoro-containing monomer was 2,2,2-Trifluoroethyl methacrylate (TFEMA). Ethyl methacrylate (EMA) was also used for comparison. Results have shown that the optimal antibacterial and anti-microbial adhesion characteristics were noted on the substrates grafted with DMAEMA + 8 and TFEMA. This can be attributed to the enhanced degree of surface quaternization due to the hydrophobic interactions between the grafted TFEMA and DMAEMA + 8 chains, leading to an increase in antibacterial efficacy of modified cotton substrates.

Mussel-Inspired Polymeric Coatings to Realize Functions from Single and Dual to Multiple Antimicrobial Mechanisms

Numerous efforts to fabricate antimicrobial surfaces by simple yet universal protocols with high efficiency have attracted considerable interest but proved to be particularly challenging. Herein, we designed and fabricated a series of antimicrobial polymeric coatings with different functions from single to multiple mechanisms by selectively utilizing diethylene glycol diglycidyl ether (PEGDGE), polylysine, and poly[glycidylmethacrylate-co-3-(dimethyl(4-vinylbenzyl)ammonium)propyl sulfonate] (poly(GMA-co-DVBAPS)) via straightforward mussel-inspired codeposition techniques. Bactericidal polylysine endowed the modified surfaces with a high ability (∼90%) to kill attached bacteria, while PEGDGE components with unique surface hydration prevented bacterial adhesion, avoiding the initial biofilm formation. Moreover, excellent salt-responsive poly(GMA-co-DVBAPS) enabled reactant polymeric coatings to change chain conformations from shrinkable to stretchable state and subsequently release >90% attached bacteria when treated with NaCl solution, even after repeated cycles. Therefore, the obtained polymeric coatings, polydopamine/poly(GMA-co-DVBAPS) (PDA/PDV), polydopamine/polylysine/poly(GMA-co-DVBAPS) (PDA/l-PDV), and polydopamine/polylysine/poly(GMA-co-DVBAPS)/diethylene glycol diglycidyl ether (PDA/l-PDV-PEGDGE), controllably realized functions from single and dual to multiple antimicrobial mechanisms, as evidenced by long-term antifouling activity to bacteria, high bactericidal efficiency, and salt-responsive bacterial regeneration performance with several bacterial killing-release cycles. This study not only contributes to mussel-inspired chemistry for polymeric coatings with controllable functions but also provides a series of reliable and highly efficient antimicrobial surfaces for potential biomedical applications.

New Smart Antimicrobial Hydrogels, Nanomaterials, and Coatings: Earlier Action, More Specific, Better Dosing?

To fight against antibiotic-resistant bacteria adhering and developing on medical devices, which is a growing problem worldwide, researchers are currently developing new "smart" materials and coatings. They consist in delivery of antimicrobial agents in an intelligent way, i.e., only when bacteria are present. This requires the use of new and sophisticated tools combining antimicrobial agents with lipids or polymers, synthetic and/or natural. In this review, three classes of innovative materials are described: hydrogels, nanomaterials, and thin films. Moreover, smart antibacterial materials can be classified into two groups depending on the origin of the stimulus used: those that respond to a nonbiological stimulus (light, temperature, electric and magnetic fields) and those that respond to a biological stimulus related to the presence of bacteria, such as changes in pH or bacterial enzyme secretion. The bacteria presence can induce a pH change that constitutes a first potential biological trigger allowing the system to become active. A second biological trigger signal consists in enzymes produced by bacteria themselves. A complete panel of recent studies will be given focusing on the design of such innovative smart materials that are sensitive to biological triggers.

The Mechanisms and the Applications of Antibacterial Polymers in Surface Modification on Medical Devices

Medical device contamination caused by microbial pathogens such as bacteria and fungi has posed a severe threat to the patients' health in hospitals. Due to the increasing resistance of pathogens to antibiotics, the efficacy of traditional antibiotics treatment is gradually decreasing for the infection treatment. Therefore, it is urgent to develop new antibacterial drugs to meet clinical or civilian needs. Antibacterial polymers have attracted the interests of researchers due to their unique bactericidal mechanism and excellent antibacterial effect. This article reviews the mechanism and advantages of antimicrobial polymers and the consideration for their translation. Their applications and advances in medical device surface coating were also reviewed. The information will provide a valuable reference to design and develop antibacterial devices that are resistant to pathogenic infections.

Antibacterial hydrogel coating: Strategies in surface chemistry

Hydrogels have emerged as promising antimicrobial materials due to their unique three-dimensional structure, which provides sufficient capacity to accommodate various materials, including small molecules, polymers and particles. Coating substrates with antibacterial hydrogel layers has been recognized as an effective strategy to combat bacterial colonization. To prevent possible delamination of hydrogel coatings from substrates, it is crucial to attach hydrogel layers via stronger links, such as covalent bonds. To date, various surface chemical strategies have been developed to introduce hydrogel coatings on different substrates. In this review, we first give a brief introduction of the major strategies for designing antibacterial coatings. Then, we summarize the chemical methods used to fix the antibacterial hydrogel layer on the substrate, which include surface-initiated graft crosslinking polymerization, anchoring the hydrogel layer on the surface during crosslinking, and chemical crosslinking of layer-by-layer coating. The reaction mechanisms of each method and matched pretreatment strategies are systemically documented with the aim of introducing available protocols to researchers in related fields for designing hydrogel-coated antibacterial surfaces.

Layer-by-layer zwitterionic modification of diverse substrates with durable anti-corrosion and anti-fouling properties

A versatile coating strategy, which is suitable for the anti-corrosion and anti-fouling modification of chemically distinct substrates, is crucial in many industries. The immobilization of zwitterionic polymers onto the surface has been proven to be an excellent approach for the improvement of antibiofouling potency. However, the anti-corrosion property has not always been considered simultaneously. Herein, a layer-by-layer (LBL) zwitterionic surface modification strategy was proposed: the surface was first coated with a polydopamine (PDA) layer for anti-corrosion; then, by self-assembling a monolayer of 3-aminopropyl triethoxysilane (APTES), the anti-corrosion ability was further enhanced and the efficiency of grafting was improved; thereafter, by immobilizing the zwitterionic polysulfobetaine (PSB) polymer brush layer, the surface could effectively repel biofouling. The surface chemical composition and morphology characterization was performed by using attenuated total reflectance Fourier transform infrared (ATR-FTIR) spectroscopy, scanning electron microscopy (SEM), atomic force microscopy (AFM), and water contact angle measurements, demonstrating that the modification was stepwise introduced onto the surface. The thickness of coating was observed and measured by SEM cross-sectional analysis. In vitro studies revealed that the PSB coated surfaces dramatically reduced the adhesion of bovine serum albumin (BSA), bovine plasma fibrinogen (Fg), bovine γ-globulin (γ-GL), the mixture of these proteins, fibroblasts, E. coli and S. aureus with superior cytocompatibility and hemocompatibility. Moreover, the electrochemical impedance spectroscopy and acidic corrosion studies indicated that an excellent and durable anti-corrosion property was established successfully on the surfaces of stainless steel, cotton textile and wood plates, confirming the feasibility of the LBL surface modification strategy. Significantly, this LBL surface chemistry may be widely applied for the modification of other materials, such as biosensors, biomedical implants and/or devices, and marine equipment.

Smart, Photothermally Activated, Antibacterial Surfaces with Thermally Triggered Bacteria-Releasing Properties

The development of effective antibacterial surfaces to prevent the attachment of pathogenic bacteria and subsequent bacterial colonization and biofilm formation is critically important for medical devices and public hygiene products. In the work reported herein, a smart antibacterial hybrid film based on tannic acid/Fe³⁺ ion (TA/Fe) complex and poly(N-isopropylacrylamide) (PNIPAAm) is deposited on diverse substrates. This surface is shown to have bacteria-killing and bacteria-releasing properties based on, respectively, near-infrared photothermal activation and subsequent cooling. The TA/Fe complex has three roles in this system: (i) as a universal adhesive "anchor" for surface modification, (ii) as a high-efficiency photothermal agent for ablation of attached bacteria (including multidrug resistant bacteria), and (iii) as a robust linker for immobilization of NH₂-terminated PNIPAAm via either Michael addition or Schiff base formation. Moreover, because of the thermoresponsive properties of the immobilized PNIPAAm, almost all of the killed bacteria and other debris can be removed from the surface simply by lowering the temperature. It is shown that this hybrid film can maintain good antibacterial performance after being used for multiple "kill-and-release" cycles and can be applied to various substrates regardless of surface chemistry or topography, thus providing a broadly applicable, simple, and reliable solution to the problems associated with surface-attached bacteria in various healthcare applications.

Initiated Chemical Vapor Deposition of Graded Polymer Coatings Enabling Antibacterial, Antifouling, and Biocompatible Surfaces

We report initiated chemical vapor deposition of model-graded polymer coatings enabling antibacterial, antifouling, and biocompatible surfaces. The graded coating was constructed by a bottom layer consisting of bactericidal poly(dimethyl amino methyl styrene) and a surface layer consisting of both dimethyl amino methyl styrene (DMAMS) and hydrophilic vinyl pyrrolidone (VP) moieties. Fourier transform infrared spectra showed existence of both DMAMS and VP in the coating with DMAMS as the major component, while X-ray photoelectron spectroscopy analysis and water contact angle measurement revealed a VP-enriched coating surface. The resultant coating exhibited more than 99.9% killing rate against both Gram-negative Escherichia coli and Gram-positive Bacillus subtilis despite the incorporation of VP on the surface. We believe that such bactericidal capability resulted because of its high surface zeta potential, which could be originated from the DMAMS units distributed both on the top surface and underneath. The graded coating achieved more than 85% bacterial fouling resistance than the pristine substrate, as well as improved biocompatibility, owing to the abundant surface lactam groups from the VP moiety. Furthermore, the graded coating maintained good bactericidal capability after multicycle challenges of bacterial solutions and was durable against continuous rigorous washing, suggesting potential applications in biomedical devices.

Poly(N-isopropylacrylamide)-Based Thermoresponsive Composite Hydrogels for Biomedical Applications

Poly(N-isopropylacrylamide) (PNIPAM)-based thermosensitive hydrogels demonstrate great potential in biomedical applications. However, they have inherent drawbacks such as low mechanical strength, limited drug loading capacity and low biodegradability. Formulating PNIPAM with other functional components to form composited hydrogels is an effective strategy to make up for these deficiencies, which can greatly benefit their practical applications. This review seeks to provide a comprehensive observation about the PNIPAM-based composite hydrogels for biomedical applications so as to guide related research. It covers the general principles from the materials choice to the hybridization strategies as well as the performance improvement by focusing on several application areas including drug delivery, tissue engineering and wound dressing. The most effective strategies include incorporation of functional inorganic nanoparticles or self-assembled structures to give composite hydrogels and linking PNIPAM with other polymer blocks of unique properties to produce copolymeric hydrogels, which can improve the properties of the hydrogels by enhancing the mechanical strength, giving higher biocompatibility and biodegradability, introducing multi-stimuli responsibility, enabling higher drug loading capacity as well as controlled release. These aspects will be of great help for promoting the development of PNIPAM-based composite materials for biomedical applications.

Synergistic Chemotherapy and Photodynamic Therapy of Endophthalmitis Mediated by Zeolitic Imidazolate Framework-Based Drug Delivery Systems

Endophthalmitis, derived from the infections of pathogens, is a common complication during the use of ophthalmology-related biomaterials and after ophthalmic surgery. Herein, aiming at efficient photodynamic therapy (PDT) of bacterial infections and biofilm eradication of endophthalmitis, a pH-responsive zeolitic imidazolate framework-8-polyacrylic acid (ZIF-8-PAA) material is constructed for bacterial infection-targeted delivery of ammonium methylbenzene blue (MB), a broad-spectrum photosensitizer antibacterial agent. Polyacrylic acid (PAA) is incorporated into the system to achieve higher pH responsiveness and better drug loading capacity. MB-loaded ZIF-8-PAA nanoparticles are modified with AgNO₃ /dopamine for in situ reduction of AgNO₃ to silver nanoparticles (AgNPs), followed by a secondary modification with vancomycin/NH₂ -polyethylene glycol (Van/NH₂ -PEG), leading to the formation of a composite nanomaterial, ZIF-8-PAA-MB@AgNPs@Van-PEG. Dynamic light scattering, transmission electron microscopy, and UV-vis spectral analysis are used to explore the nanoparticles synthesis, drug loading and release, and related material properties. In terms of biological performance, in vitro antibacterial studies against three kinds of bacteria, i.e., Escherichia coli, Staphylococcus aureus, and methicillin-resistant S. aureus, suggest an obvious superiority of PDT/AgNPs to any single strategy. Both in vitro retinal pigment epithelium cellular biocompatibility experiments and in vivo mice endophthalmitis models verify the biocompatibility and antibacterial function of the composite nanomaterials.

Design of salt-responsive and regenerative antibacterial polymer brushes with integrated bacterial resistance, killing, and release properties

The development of smart materials and surfaces with multiple antibacterial actions is of great importance for both fundamental research and practical applications, but this has proved to be extremely challenging. In this work, we proposed to integrate salt-responsive polyDVBAPS (poly(3-(dimethyl(4-vinylbenzyl) ammonio)propyl sulfonate)), antifouling polyHEAA (poly(N-hydroxyethyl acrylamide)), and bactericidal TCS (triclosan) into single surfaces by polymerizing and grafting polyDVBAPS and polyHEAA onto the substrate in a different way to form two types of polyDVBAPS/poly(HEAA-g-TCS) and poly(DVBAPS-b-HEAA-g-TCS) brushes with different hierarchical structures, as confirmed by X-ray photoelectron spectroscopy (XPS), atom force microscopy (AFM), and ellipsometry. Both types of polymer brushes demonstrated their tri-functional antibacterial activity to resist bacterial attachment by polyHEAA, to release ∼90% of dead bacteria from the surface by polyDVBAPS, and to kill ∼90% of bacteria on the surface by TCS. Comparative studies also showed that removal of any component from polyDVBAPS/poly(HEAA-g-TCS) and poly(DVBAPS-b-HEAA-g-TCS) compromised the overall antibacterial performance, further supporting a synergistic effect of the three compatible components. More importantly, the presence of salt-responsive polyDVBAPS allowed both brushes to regenerate with almost unaffected antibacterial capacity for reuse in multiple kill-and-release cycles. The tri-functional antibacterial surfaces present a promising design strategy for further developing next-generation antibacterial materials and coatings for antibacterial applications.