Three-Dimensional Clustered Nanostructures for Microfluidic Surface-Enhanced Raman Detection

Rational Strategy for Space-Confined Atomic Layer Deposition

Atomic layer deposition (ALD) offers excellent controllability of spatial uniformity, film thickness at the Angstrom level, and film composition even for high-aspect-ratio nanostructured surfaces, which are rarely attainable by other conventional deposition methodologies. Although ALD has been successfully applied to various substrates under open-top circumstances, the applicability of ALD to confined spaces has been limited because of the inherent difficulty of supplying precursors into confined spaces. Here, we propose a rational methodology to apply ALD growths to confined spaces (meter-long microtubes with an aspect ratio of up to 10 000). The ALD system, which can generate differential pressures to confined spaces, was newly developed. By using this ALD system, it is possible to deposit TiO_x layers onto the inner surface of capillary tubes with a length of 1000 mm and an inner diameter of 100 μm with spatial deposition uniformity. Furthermore, we show the superior thermal and chemical robustness of TiO_x-coated capillary microtubes for molecular separations when compared to conventional molecule-coated capillary microtubes. Thus, the present rational strategy of space-confined ALD offers a useful approach to design the chemical and physical properties of the inner surfaces of various confined spaces.

Substrate-Induced Growth of Micro/Nanostructured Zn(OH)F Arrays for Highly Sensitive Microfluidic Fluorescence Assays

To date, ZnO array-based microfluidic fluorescence assays have been widely investigated and have exhibited excellent performance in the detection of cancer biomarkers. However, the requirements of highly sensitive detection necessitate further improvement of current Zn-based fluorescence detection devices. Here, a rhombus-like Zn(OH)F array-based microfluidic fluorescence detection device is proposed. Construction of Zn(OH)F arrays on the inner wall of a microchannel is carried out via a microfluidic chemical method. A substrate-induced growth strategy for Zn(OH)F arrays is proposed, and various micro/nanostructured Zn(OH)F arrays are successfully obtained. Zn(OH)F nanorod arrays with a high aspect ratio can be constructed on the columnar ZnO nanorod arrays, and the results indicate that the fluorescence enhancement factor (EF) of the Zn(OH)F arrays toward Cy3 is approximately 4-fold that of the ZnO nanorod arrays, which can be attributed to the higher excitation light absorption and evanescent electric field. In human epididymis-specific protein 4 (HE4) detection, the limit of detection (LOD) reaches 9.3 fM, and the dynamic linear range is 10 fM to 100 pM. It has been demonstrated that Zn(OH)F nanorod array-based microfluidic devices are excellent fluorescence assay platforms that also provide a new design and construction strategy for fluorescence enhancement substrates for the detection of biomarkers.

Rational Strategy for Space-Confined Seeded Growth of ZnO Nanowires in Meter-Long Microtubes

Seeded crystal growths of nanostructures within confined spaces offer an interesting approach to design chemical reaction spaces with tailored inner surface properties. However, such crystal growth within confined spaces tends to be inherently difficult as the length increases as a result of confinement effects. Here, we demonstrate a space-confined seeded growth of ZnO nanowires within meter-long microtubes of 100 μm inner diameter with the aspect ratio of up to 10 000, which had been unattainable to previous methods of seeded crystal growths. ZnO nanowires could be grown via seeded hydrothermal crystal growth for relatively short microtubes below the length of 40 mm, while any ZnO nanostructures were not observable at all for longer microtubes above 60 mm with the aspect ratio of 600. Microstructural and mass spectrometric analysis revealed that a conventional seed layer formation using zinc acetate is unfeasible within the confined space of long microtubes as a result of the formation of detrimental residual Zn complex compounds. To overcome this space-confined issue, a flow-assisted seed layer formation is proposed. This flow-assisted method enables growth of spatially uniform ZnO nanowires via removing residual compounds even for 1 m long microtubes with the aspect ratio of up to 10 000. Finally, the applicably of ZnO-nanowire-decorated long microtubes for liquid-phase separations was demonstrated.

Microfluidics for ZnO micro-/nanomaterials development: rational design, controllable synthesis, and on-chip bioapplications

Zinc oxide (ZnO) materials hold great promise in diverse applications due to their attractive physicochemical features. Recent years, especially the last decade, have witnessed considerable progress toward rational design and bioapplications of multiscale ZnO materials through microfluidic techniques. Design of a microfluidic device that allows for precise control over reaction conditions could not only yield ZnO particles with a fast production rate and high quality, but also permit downstream applications with desirable and superior performance. This review summarizes microfluidic approaches for the synthesis and applications of ZnO micro-/nanomaterials. In particular, we discuss the recent achievement of using microfluidic reactors in the controllable synthesis of ZnO structures (wire, rod, sphere, flower, sheet, flake, spindle, and ellipsoid), and highlight the unprecedented opportunities for applying them in biosensing, biological separation, and molecular catalysis applications through microfluidic chips. Finally, major challenges and potential opportunities are explored to guide future studies in this area.

Synergistic Enhancement Effect for Boosting Raman Detection Sensitivity of Antibiotics

In this paper, a two-step method is used to prepare a regenerative three-dimensional (3D) ZnO/Ag@Au substrate for developing a superior sensitive surface enhanced Raman scattering (SERS) method for detecting antibiotics. A great electromagnetic enhancement is observed from the as-prepared composite substrate, which is triggered by tuning the electron distribution of metals and semiconductor metal oxide. The strong interaction between target sample and the huge surface area of ZnO/Ag@Au composite promotes the charge transfer to produce promising chemical enhancement. The synergistic physical and chemical enhancement mechanisms are validated by density functional theory and finite difference time domain simulation. Additionally, the presence of light "echo effect" in the 3D structure of ZnO support could also amplify the efficiency of light excitation for Raman scattering. The above-stated merits benefit to boost the Raman scattering detection sensitivity for real samples. The ZnO/Ag@Au-based SERS substrate could detect rhodamine 6G molecules with an enhancement factor of up to 1.48 × 10⁹ and the lowest detectable concentration of 10^-10 M. As a real application, antibiotics sulfapyridine in milk is determined by using the proposed SERS protocol, and the limit of detection at 1 × 10^-9 M could be reached. As a prospective, the ZnO/Ag@Au-based SERS method would be extended for food safety and biomedicine analysis.

Biological Photonic Crystal-Enhanced Plasmonic Mesocapsules: Approaching Single-Molecule Optofluidic-SERS Sensing

Surface-enhanced Raman scattering (SERS) sensing in microfluidic devices, namely optofluidic-SERS, suffers an intrinsic trade-off between mass transport and hot spot density, both of which are required for ultra-sensitive detection. To overcome this compromise, photonic crystal-enhanced plasmonic mesocapsules are synthesized, utilizing diatom biosilica decorated with in-situ growth silver nanoparticles (Ag NPs). In our optofluidic-SERS testing, 100× higher enhancement factors and greater than 1,000× better detection limit were achieved compared with traditional colloidal Ag NPs, the improvement of which is attributed to unique properties of the mesocapsules. First, the porous diatom biosilica frustules serve as carrier capsules for high density Ag NPs that form high density plasmonic hot-spots. Second, the submicron-pores embedded in the frustule walls not only create a large surface-to-volume ratio allowing for effective analyte capture, but also enhance the local optical field through the photonic crystal effect. Last, the mesocapsules provide effective mixing with analytes as they are flowing inside the microfluidic channel. The reported mesocapsules achieved single molecule detection of Rhodamine 6G in microfluidic devices and were further utilized to detect 1 nM of benzene and chlorobenzene compounds in tap water with near real-time response, which successfully overcomes the constraint of traditional optofluidic sensing.

Enhanced immunofluorescence detection of a protein marker using a PAA modified ZnO nanorod array-based microfluidic device

Zinc oxide (ZnO) often serves as protein microarray substrates owing to its outstanding fluorescence enhancement effect. However, the integration of functional substrates with microfluidic technology to detect cancer biomarkers still needs to be optimized and promoted, for example, the optimization of micro/nanostructure and hydrophilic modification strategies for fluorescence immunoassays. Here, ZnO nanorod arrays were constructed on the inner wall of glass capillaries through a microfluidic chemical method, and the electrostatic layer by layer self-assembly was applied to modify the nanorod array with hydrophilic polyelectrolyte-polyacrylic acid (PAA). The effects of the flow rate and the reagent concentration on the morphology of the ZnO nanorod array were investigated. The ZnO nanorod array-based glass capillary, prepared at 25 μL min-1 for 4 min with 50 mM Zn2+ in solution, showed a remarkable enhancement in fluorescence performance. In addition, the introduction of PAA suppressed the interference of nonspecific protein and improved the antibody loading capacity effectively. In the detection of carcinoembryonic antigen, the limit of detection reached 100 fg mL-1, which indicated that the ZnO@PAA nanorod array-based microfluidic device exhibits remarkable fluorescence detection performance towards protein markers and possesses potential to be applied to point-of-care diagnostics and high throughput cancer biomarker detection.

Laser Irradiation of Metal Oxide Films and Nanostructures: Applications and Advances

Recent technological advances in developing a diverse range of lasers have opened new avenues in material processing. Laser processing of materials involves their exposure to rapid and localized energy, which creates conditions of electronic and thermodynamic nonequilibrium. The laser-induced heat can be localized in space and time, enabling excellent control over the manipulation of materials. Metal oxides are of significant interest for applications ranging from microelectronics to medicine. Numerous studies have investigated the synthesis, manipulation, and patterning of metal oxide films and nanostructures. Besides providing a brief overview on the principles governing the laser-material interactions, here, the ongoing efforts in laser irradiation of metal oxide films and nanostructures for a variety of applications are reviewed. Latest advances in laser-assisted processing of metal oxides are summarized.

Silica nanowire assemblies as three-dimensional, optically transparent platforms for constructing highly active SERS substrates

Three-dimensional surface-enhanced Raman scattering (SERS) substrates are prepared via the in situ deposition of silver nanoparticles (AgNPs) on silica nanowire (SiO₂ NW) assemblies, either in a free-standing membrane structure or as an optically transparent film supported on Scotch tape. The negatively charged surface of the SiO₂ NW favors Ag⁺ ion enrichment around itself, with the ions forming densely deposited AgNPs on the NW after reducing agents are added to the solution. A SERS substrate with high sensitivity is achieved owing to abundant "hot spots" generated by the inter-AgNP gaps in the 3D geometry of the NW networks. The AgNP-deposited SiO₂ NW membrane has a SERS enhancement factor of 2.9 × 10⁸ and a detection limit of 10^-9 M towards 4-mercaptopyridine probing and 10^-8 M towards dithiocarbamate pesticide (i.e., thiram) probing. Moreover, the AgNP-deposited, Scotch tape-supported SiO₂ NW film achieves non-invasive, direct detection of real-world surfaces due to its high sensitivity, high flexibility and optically transparent properties.

Bubble-Mediated Ultrasensitive Multiplex Detection of Metal Ions in Three-Dimensional DNA Nanostructure-Encoded Microchannels

The development of rapid and sensitive point-of-test devices for on-site monitoring of heavy-metal contamination has great scientific and technological importance. However, developing fast, inexpensive, and sensitive microarray sensors to achieve such a goal remains challenging. In this work, we present a DNA-nanostructured microarray (DNM) with a tubular three-dimensional sensing surface and an ordered nanotopography. This microarray enables enhanced molecular interaction toward the rapid and sensitive multiplex detection of heavy-metal ions. In our design, the use of DNA tetrahedral-structured probes engineers the sensing interface with spatially resolved and density-tunable sensing spots that improve the microconfined molecular recognition. A bubble-mediated shuttle reaction was used inside the DNM-functionalized microchannel to improve the target-capturing efficiency. Using this novel DNM biosensor, the sensitive and selective detection of multiple heavy-metal ions (i.e., Hg²⁺, Ag⁺, and Pb²⁺) was achieved within 5 min, the detection limit was down to 10, 10, and 20 nM for Hg²⁺, Ag⁺, and Pb²⁺, respectively. The feasibility of our DNM sensor was further demonstrated by probing heavy-metal ions in real water samples with a direct optical readout. Beyond metal ions, this unique DNM sensor can easily be extended to in vitro bioassays and clinical diagnostics.

Surface-enhanced Raman spectroscopy and microfluidic platforms: challenges, solutions and potential applications

The review provides an overview of the development in the field of surface-enhanced Raman spectroscopy combined with microfluidic platforms.