Multifunctional Polymer Ligand Interface CdZnSeS/ZnS Quantum Dot/Cy3-Labeled Protein Pairs as Sensitive FRET Sensors

A multifunctional hyaluronic acid-engineered mesoporous nanoreactor with H2O2/O2 self-sufficiency for pH-triggered endo-lysosomal escape and synergetic cancer therapy

Monotherapy has poor accuracy and is easily restricted by tumor microenvironment (TME). Remodeling components of the TME to activate multimodal cancer therapy with high precision and efficiency is worth exploring. A multifunctional nanoreactor was fabricated by decorating chlorin e6-modified and PEGylated hyaluronic acid bearing diethylenetriamine-conjugated dihydrolipoic acid on the surface of glucose oxidase (GOx)-loaded hollow mesoporous CuS nanoparticles (labeled as GOx@HCuS@HA). This nanoreactor efficiently targets tumor sites, enhances cellular internalization, and swiftly escapes from endo-lysosomes after intravenous injection. Subsequently, GOx@HCuS@HA was activated in hyaluronidase and H + -rich TME to produce H2O2 and gluconic acid through the oxidation of glucose, which not only blocks the energy supply of cancer cells, executing starvation treatment (ST), but also bolsters hydroxyl radicals (•OH)-based chemodynamic therapy (CDT) by Fenton-like reaction between HCuS and H2O2. Furthermore, reductive Cu ions could catalyze H2O2 to produce O2 to alleviate the limitation of photodynamic therapy (PDT) for tumor hypoxia. Additionally, the photothermal effect of HCuS under NIR irradiation could increase the temperature of tumor tissues to perform photothermal therapy (PTT). This synergistic antitumor strategy could ultimately achieve precise tumor cell destruction and maintain excellent biosafety. Hence, this nanoreactor offer promising prospects for efficient tumor treatment.

Oligomeric Zinc Thiolates Tethering Multidentate Carboxylates for Nondestructive Aqueous Phase Transfer of Quantum Dots

Functionalization of quantum dots (QDs) via ligand exchange is prone to debase their photoluminescence quantum yield (PL QY) owing to the unavoidable surface damage by excess reactants, and even worse in aqueous medium. Herein, the oligomeric zinc thiolate as the multidentate hydrophilic ligand featuring facile synthetic protocol is proposed. A simple reaction between ZnCl2 and 3-mercaptopropionic acid produces oligomeric ligands containing 3-6 zinc thiolate units, where the terminal moieties provide multidentate anchoring to the surface as well as hydrophilicity. 2D proton nuclear Overhauser effect spectroscopy (2D 1H NOESY) and X-ray photoelectron spectroscopy (XPS) reveal that the oligomeric zinc thiolate ligands adsorb on the surface via multidentate metal carboxylate bindings without destruction of molecular structure, regardless of partial dissociation of thiolate branches in aqueous phase. Enhanced binding affinity granted by the multidentate nature allows for the effective exchange of original surface ligands without considerable surface deterioration. The zinc thiolate-capped Cd-free aqueous QDs exhibit a high photoluminescence quantum yield of ≈90% and extended stability against long-term storage and photochemical stress.

Ultrasensitive Fluorescence Detection of Ascorbic Acid Using Silver Ion-Modulated High-Quality CdSe/CdS/ZnS Quantum Dots

Improving the sensitivity of the fluorescence method for the detection of bioactive molecules is crucial in biochemical analysis. In this work, an ultrasensitive sensing strategy was constructed for the detection of ascorbic acid (AA) using high-quality 3-mercaptopropionic acid-capped CdSe/CdS/ZnS quantum dots (MPA-CdSe/CdS/ZnS QDs) as the fluorescent probe. The prepared water-soluble QDs exhibited a high photoluminescence quantum yield (PL QY) of up to 96%. Further, the fluorescence intensity of the QDs was intensively quenched through the dynamic quenching of Ag+ ions due to an efficient photoinduced electron transfer progress. While the existence of AA before adding Ag+ ions, Ag+ ions were reduced. Thus, the interaction of the QDs and Ag+ ions was destroyed, which led to the fluorescence distinct recovery. The detection limit of AA could be as low as 0.2 nM using this sensing system. Additionally, most relevant small molecules and physiological ions had no influence on the analysis of AA. Satisfactory results were obtained in orange beverages, showing its great potential as a meaningful platform for highly sensitive and selective AA sensing for clinical analysis.

Evaluation of CTB-sLip for Targeting Lung Metastasis of Colorectal Cancer

Lung metastasis of colorectal cancer is common in the clinic; however, precise targeting for the diagnosis and therapy purposes of those lung metastases remains challenging. Herein, cholera toxin subunit b (CTB) protein was chemically conjugated on the surface of PEGylated liposomes (CTB-sLip). Both human-derived colorectal cancer cell lines, HCT116 and HT-29, demonstrated high binding affinity and cellular uptake with CTB-sLip. In vivo, CTB-sLip exhibited elevated targeting capability to the lung metastasis of colorectal cancer in the model nude mice in comparison to PEGylated liposomes (sLip) without CTB modification. CTB conjugation induced ignorable effects on the interaction between liposomes and plasma proteins but significantly enhanced the uptake of liposomes by numerous blood cells and splenic cells, leading to relatively rapid blood clearance in BALB/c mice. Even though repeated injections of CTB-sLip induced the production of anti-CTB antibodies, our results suggested CTB-sLip as promising nanocarriers for the diagnosis of lung metastasis of colorectal cancer.

High-quantum yield alloy-typed core/shell CdSeZnS/ZnS quantum dots for bio-applications

Background

Quantum dots (QDs) have been used as fluorophores in various imaging fields owing to their strong fluorescent intensity, high quantum yield (QY), and narrow emission bandwidth. However, the application of QDs to bio-imaging is limited because the QY of QDs decreases substantially during the surface modification step for bio-application.

Results

In this study, we fabricated alloy-typed core/shell CdSeZnS/ZnS quantum dots (alloy QDs) that showed higher quantum yield and stability during the surface modification for hydrophilization compared with conventional CdSe/CdS/ZnS multilayer quantum dots (MQDs). The structure of the alloy QDs was confirmed using time-of-flight medium-energy ion scattering spectroscopy. The alloy QDs exhibited strong fluorescence and a high QY of 98.0%. After hydrophilic surface modification, the alloy QDs exhibited a QY of 84.7%, which is 1.5 times higher than that of MQDs. The QY was 77.8% after the alloy QDs were conjugated with folic acid (FA). Alloy QDs and MQDs, after conjugation with FA, were successfully used for targeting human KB cells. The alloy QDs exhibited a stronger fluorescence signal than MQD; these signals were retained in the popliteal lymph node area for 24 h.

Conclusion

The alloy QDs maintained a higher QY in hydrophilization for biological applications than MQDs. And also, alloy QDs showed the potential as nanoprobes for highly sensitive bioimaging analysis.

Graphical Abstract

Supplementary Information

The online version contains supplementary material available at 10.1186/s12951-021-01227-2.

Positive Sorption Behaviors in the Ligand Exchanges for Water-Soluble Quantum Dots and a Strategy for Specific Targeting

N,N,N',N'-Tetramethylethylenediamine (TMEDA) and ethylenediamine (EDA) were investigated in-depth in the ligand exchanges for water-soluble CdSe quantum dots (QDs). TMEDA could assist the phase transfer of QDs from apolar solvents to the aqueous solutions as stabilized by mercaptopropionic acid (MPA). We successfully maintained the stability of a series of MPA-capped QDs of different ligand densities for NMR characterizations in aqueous solutions. The proton NMR spectroscopies of MPA of the binding state were used to analyze the ligand densities on the surface of QDs, which were not explored in the past. The binding thermodynamics of the surface ligands of QDs, as analyzed using the Hill equation, demonstrated a positive promoting effect and possible interactions between ligands. EDA in the purification process underwent a spontaneous adsorption with two-stage thermodynamic behaviors as characterized by isothermal titration calorimetry. Due to the positive role of the already adsorbed ligands, excess EDA would further attach to the surface of QDs in the form of non-bonded physisorption, greatly improving the quantum yield (QY) of QDs, and the ligand of this part would almost not change the stability of QDs. We proposed a strategy for the preparation of aqueous QDs with a high QY, followed by fluorescence quenching-enhancement cycles caused by purification-adsorption operations. The strategy made it possible for the preparation of functional QDs with small molecules after purification operations. Kinetics of the sorption of ligands on the surface of QDs were determined by fluorescence spectroscopy. Modified pseudo-second-order kinetics after consideration of the ligand-ligand interaction effect could well analyze the kinetic data. This kinetic model had advantages over the previous ligand exchange model in terms of accuracy, reproducibility, and physical significance. Finally, we used the above strategy for the design of fluorescent QDs for bioimaging of lysosomes, mitochondria, and cancer cells. This work can simplify the preparation of multifunctional fluorescent QDs and avoid complicated ligand design.

Highly stable fluorescent probe based on mesoporous silica coated quantum dots for sensitive and selective detection of Cd2

Cadmium ions have been of crucial concern due to the high biological toxicity and serious environmental risks. Various fluorescent Cd-sensitive probes have been reported with improved sensing properties, but still severely suffer from poor stability and insufficient selectivity. In this work, a stable fluorescent probe based on silica encapsulated quantum dots (QDs) have been developed for rapid, sensitive and selective detection of cadmium ion. To improve fluorescence stability, the strategy of mesoporous silica encapsulation was adopted, in which the mesoporous silica shell offers numerous channels for Cd²⁺. Further, the Forster Resonance Energy Transfer (FRET) system, where QDs@mSiO₂and rhodamine B (RB) are used as donors and acceptors respectively, has been constructed, in which the mesoporous silica shell also serves as spacers with tunable thickness for controlling the QD-RB distance. Under optimal conditions, the probes possess a sensitive fluorescence response with a detection limit of 1.25μM. Visual detection can be realized by the obvious fluorescence changes of the FRET system. In addition, the FRET system shows promising sensing performances both in tap water samples and rice-washed water samples, confirming a great potential for practical application.

CD44-Targeted and Enzyme-Responsive Photo-Cross-Linked Nanogels with Enhanced Stability for In Vivo Protein Delivery

One of the biggest challenges of the protein delivery system is to realize stable and high protein encapsulation efficiency in blood circulation and rapid release of protein in the targeted tumor cells. To overcome these hurdles, we fabricated enzyme-responsive photo-cross-linked nanogels (EPNGs) through UV-triggered chemical cross-linking of cinnamyloxy groups in the side chain of PEGylation hyaluronic acid (HA) for CD44-targeted transport of cytochrome c (CC). The EPNGs showed high loading efficiency and excellent stability in different biological media. Notably, CC leakage effectively suppressed under physiological conditions but accelerated release in the presence of hyaluronidase, an overexpressed enzyme in tumor cells. Moreover, thiazolylblue tetrazolium bromide (MTT) results indicated that the vacant EPNGs showed excellent nontoxicity, while CC-loaded EPNGs exhibited higher killing efficiency to CD44-positive A549 cells than to CD44-negative HepG2 cells and free CC. Confocal images confirmed that CC-loaded EPNGs could effectively be internalized by CD44-mediated endocytosis pathway and rapidly escape from the endo/lysosomal compartment. Human lung tumor-bearing mice imaging assays further revealed that CC-loaded EPNGs actively target tumor locations. Remarkably, CC-loaded EPNGs also exhibited enhanced antitumor activity with negligible systemic toxicity. These results implied that these EPNGs have appeared as stable and promising nanocarriers for tumor-targeting protein delivery.

A pH-activated charge convertible quantum dot as a novel nanocarrier for targeted protein delivery and real-time cancer cell imaging

The rapid developments of nanocarriers based on quantum dots (QDs) have been confirmed to show substantial promise for drug delivery and bioimaging. However, optimal QDs-based nanocarriers still need to have their controlled behavior in vitro and in vivo and decrease heavy metal-associated cytotoxicity. Herein, a pH-activated charge convertible QD-based nanocarrier was fabricated by capping multifunctional polypeptide ligands (mPEG-block-poly(ethylenediamine-dihydrolipoic acid-2,3-dimethylmaleic anhydride)-L-glutamate, PEG-P(ED-DLA-DMA)LG) onto the surface of core/multishell CdSe@ZnS/ZnS QD by means of a ligand exchange strategy, followed by uploading of cytochrome C (CC) (CC-loaded QD-PEG-P(ED-DLA-DMA)LG) via electrostatic interactions, in which QDs that were water-soluble and protein-loading were perfectly integrated. That is, the CC-loaded QD-PEG-P(ED-DLA-DMA)LG inherited excellent fluorescence properties from CdSe@ZnS/ZnS QD for real-time imaging, as well as tumor-microenvironment sensitivities from PEG-P(ED-DLA-DMA)LG for enhanced cellular uptake and CC release. Experimental results verified that the QD-PEG-P(ED-DLA-DMA)LG showed enhanced internalization, rapid endo/lysosomal escape, and supplied legible real-time imaging for lung carcinoma cells. Furthermore, pH-triggered charge-convertible ability enabled the QD-PEG-P(ED-DLA-DMA)LG-CC to effectively kill cancer cells better than did the control groups. Hence, constructing smart nanocomposites by facile ligand-exchange strategy is beneficial to QD-based nanocarrier for tumor-targeting cancer therapy.

FRET probe for selective and sensitive detection of vitamin A by cadmium free quantum dots (ZnS)

Vitamin A as a powerful antioxidant plays an important role in human body functions including bone remodeling regulation, healthy immune system and cell growth reproduction. An accurate determination of vitamin A is taken into consideration because of its importance for human health. In this paper, we reported a fluorescence resonance energy transfer (FRET) probe, MPS-capped ZnS QDs, for sensitive and selective detection of vitamin A. The colloidal MPS-capped ZnS QDs were prepared from Zinc acetate and sodium sulfide by employing 3-mercaptopropyltrimethoxysilane (MPS) molecules as the stabilizer or capping agent at the pH condition of 10. The synthesized MPS-capped ZnS QDs were characterized by means of FT-IR, UV-Vis, DLS, and TEM techniques. The sensing behavior of MPS-capped ZnS QDs for selective and sensitive detection of vitamin A, vitamin B2, vitamin B6, vitamin E, vitamin K, vitamin H, vitamin D3 and vitamin C was investigated using fluorescence spectroscopy. The detection mechanism involves photoinduced charge transfer from the surface of ZnS QDs to Vitamin resulting in the fluorescence quenching of ZnS QDs followed by nonradiative fluorescence resonance energy transfer. An excellent selectivity was observed for vitamin A versus other tested species. A linear relationship was observed between the fluorescence intensity of MPS-capped ZnS QDs and the concentration of vitamin A in the range of 3.33-36.66 μM with detection limit of 1.062 μM.

Highly efficient energy transfer from a water soluble zinc silver indium sulphide quantum dot to organic J-aggregates

Highly efficient energy transfer from a water soluble quantum dot to organic J-aggregates in an inorganic–organic nanohybrid associate.

Stability of Quantum Dots, Quantum Dot Films, and Quantum Dot Light-Emitting Diodes for Display Applications

Quantum dots (QDs) are being highlighted in display applications for their excellent optical properties, including tunable bandgaps, narrow emission bandwidth, and high efficiency. However, issues with their stability must be overcome to achieve the next level of development. QDs are utilized in display applications for their photoluminescence (PL) and electroluminescence. The PL characteristics of QDs are applied to display or lighting applications in the form of color-conversion QD films, and the electroluminescence of QDs is utilized in quantum dot light-emitting diodes (QLEDs). Studies on the stability of QDs and QD devices in display applications are reviewed herein. QDs can be degraded by oxygen, water, thermal heating, and UV exposure. Various approaches have been developed to protect QDs from degradation by controlling the composition of their shells and ligands. Phosphorescent QDs have been protected by bulky ligands, physical incorporation in polymer matrices, and covalent bonding with polymer matrices. The stability of electroluminescent QLEDs can be enhanced by using inorganic charge transport layers and by improving charge balance. As understanding of the degradation mechanisms of QDs increases and more stable QDs and display devices are developed, QDs are expected to play critical roles in advanced display applications.

Application of Förster Resonance Energy Transfer (FRET) technique to elucidate intracellular and In Vivo biofate of nanomedicines

Extensive studies on nanomedicines have been conducted for drug delivery and disease diagnosis (especially for cancer therapy). However, the intracellular and in vivo biofate of nanomedicines, which is significantly associated with their clinical therapeutic effect, is poorly understood at present. This is because of the technical challenges to quantify the disassembly and behaviour of nanomedicines. As a fluorescence- and distance-based approach, the Förster Resonance Energy Transfer (FRET) technique is very successful to study the interaction of nanomedicines with biological systems. In this review, principles on how to select a FRET pair and construct FRET-based nanomedicines have been described first, followed by their application to study structural integrity, biodistribution, disassembly kinetics, and elimination of nanomedicines at intracellular and in vivo levels, especially with drug nanocarriers including polymeric micelles, polymeric nanoparticles, and lipid-based nanoparticles. FRET is a powerful tool to reveal changes and interaction of nanoparticles after delivery, which will be very useful to guide future developments of nanomedicine.

Magnetic-Plasmonic Heterodimer Nanoparticles: Designing Contemporarily Features for Emerging Biomedical Diagnosis and Treatments

Magnetic-plasmonic heterodimer nanostructures synergistically present excellent magnetic and plasmonic characteristics in a unique platform as a multipurpose medium for recently invented biomedical applications, such as magnetic hyperthermia, photothermal therapy, drug delivery, bioimaging, and biosensing. In this review, we briefly outline the less-known aspects of heterodimers, including electronic composition, interfacial morphology, critical properties, and present concrete examples of recent progress in synthesis and applications. With a focus on emerging features and performance of heterodimers in biomedical applications, this review provides a comprehensive perspective of novel achievements and suggests a fruitful framework for future research.

Growth of Zn0.5Cd0.5S/α-Ni(OH)2 heterojunction by a facile hydrothermal transformation efficiently boosting photocatalytic hydrogen production

A rationally designed/constructed catalyst with α-Ni(OH)₂ over Zn–Cd–S shows enhanced photocatalytic hydrogen evolution attributed to the interface providing a fast charge transfer channel and reducing the photo-generated carrier recombination probability.

Charge balance control of quantum dot light emitting diodes with atomic layer deposited aluminum oxide interlayers

We developed a 1.0 nm thick aluminum oxide (Al₂O₃) interlayer as an electron blocking layer to reduce leakage current and suppress exciton quenching induced by charge imbalance in inverted quantum dot light emitting diodes (QLEDs). The Al₂O₃ interlayer was deposited by an atomic layer deposition (ALD) process that allows precise thickness control. The Al₂O₃ interlayer lowers the mobility of electrons and reduces Auger recombination which causes the degradation of device performance. A maximum current efficiency of 51.2 cd A⁻¹ and an external quantum efficiency (EQE) of 12.2% were achieved in the inverted QLEDs with the Al₂O₃ interlayer. The Al₂O₃ interlayer increased device efficiency by 1.1 times, increased device lifetime by 6 times, and contributed to reducing efficiency roll-off from 38.6% to 19.6% at a current density up to 150 mA cm⁻². The improvement of device performance by the Al₂O₃ interlayer is attributed to the reduction of electron injection and exciton quenching induced by zinc oxide (ZnO) nanoparticles (NPs). This work demonstrates that the Al₂O₃ interlayer is a promising solution for charge control in QLEDs and that the ALD process is a reliable approach for atomic scale thickness control for QLEDs.

We developed a 1.0 nm thick aluminum oxide (Al₂O₃) interlayer as an electron blocking layer to reduce leakage current and suppress exciton quenching induced by charge imbalance in inverted quantum dot light emitting diodes (QLEDs).

Polymer ligand-assisted fabrication of multifunctional and redox-responsive self-assembled magnetic nanoclusters for bimodal imaging and cancer treatment

We designed multifunctional magnetic nanoclusters, which can serve as bimodal imaging probes for the detection of solid tumors and act as emerging PDT agents to suppress tumor growth.

Rational Design of Polymeric Nanoparticles with Tailorable Biomedical Functions for Cancer Therapy

Polymeric nanoparticles (NPs) play a key role in nanoscale formulations for bioimaging, cancer treatment, and theranostics. In this work, we designed and synthesized a series of hydrophobic polymers (P1-6) with different pendent groups via one-step multicomponent Passerini reaction. These polymers possessed similar molecular structures and various biomedical functions. Interestingly, they could self-assemble into stable NPs in aqueous media. All formed NPs were redox sensitive because of the existence of disulfide bonds in the backbone. The stability of NPs in aqueous media with or without glutathione was systematically evaluated and compared. The optical performance, including fluorescence resonance energy transfer, was characterized under different conditions for those polymers with fluorescent components. Importantly, all formed NPs showed good cytocompatibility toward HeLa cells and different biological functions, including drug loading and delivery, bioimaging with variable fluorescence, and photodynamic activity, as evidenced by experiments in vitro and in vivo. These results demonstrate the great potential of multicomponent reaction to customize versatile polymeric nanoparticles for biomedical applications.

Quantum dots in imaging, drug delivery and sensor applications

Quantum dots (QDs), also known as nanoscale semiconductor crystals, are nanoparticles with unique optical and electronic properties such as bright and intensive fluorescence. Since most conventional organic label dyes do not offer the near-infrared (>650 nm) emission possibility, QDs, with their tunable optical properties, have gained a lot of interest. They possess characteristics such as good chemical and photo-stability, high quantum yield and size-tunable light emission. Different types of QDs can be excited with the same light wavelength, and their narrow emission bands can be detected simultaneously for multiple assays. There is an increasing interest in the development of nano-theranostics platforms for simultaneous sensing, imaging and therapy. QDs have great potential for such applications, with notable results already published in the fields of sensors, drug delivery and biomedical imaging. This review summarizes the latest developments available in literature regarding the use of QDs for medical applications.

Azurin/CdSe-ZnS-Based Bio-Nano Hybrid Structure for Nanoscale Resistive Memory Device

In the present study, we propose a method for bio-nano hybrid formation by coupling a redox metalloprotein, Azurin, with CdSe-ZnS quantum dot for the development of a nanoscale resistive memory device. The covalent interaction between the two nanomaterials enables a strong and effective binding to form an azurin/CdSe-ZnS hybrid, and also enabled better controllability to couple with electrodes to examine the memory function properties. Morphological and optical properties were performed to confirm both hybrid formations and also their individual components. Current-Voltage (I–V) measurements on the hybrid nanostructures exhibited bistable current levels towards the memory function device, that and those characteristics were unnoticeable on individual nanomaterials. The hybrids showed good retention characteristics with high stability and durability, which is a promising feature for future nanoscale memory devices.

Excellent stability of thicker shell CdSe@ZnS/ZnS quantum dots

Evolution of the long-term (400 h) thermal stability of green CdSe@ZnS alloyed core/shell QDs (A-QDs) and CdSe@ZnS/ZnS (alloyed core/shell)/thick shell QDs (AS-QDs) under 85 °C, 85% relative humidity conditions in air.