Synthesis of Cu-Nanoparticle Hydrogel with Self-Healing and Photothermal Properties

Photothermal Miniemulsion Polymerization by Amphiphilic Gold Nanoclusters

Gold nanoclusters (AuNCs), which are approximately 2 nm in size, exhibit distinctive photophysical and catalytic properties, but their performance is often compromised by environmental factors. To mitigate these challenges, attempts have been made to incorporate AuNCs into polymer matrices to enhance their stability. Miniemulsion polymerization has proven to be an effective method for fabricating organic-inorganic composites. Here, we present a facile photothermal-assisted method for miniemulsion polymerization utilizing AuNCs, which serve as co-stabilizers of the emulsion and photothermal conversion agents. By grafting tryptamine onto hydrophilic AuNCs, the amphiphilic AuNCs were spontaneously adsorbed at the styrene/water interfaces, resulting in stable nanoemulsions. Taking advantage of the photothermal properties of surface-bounded AuNCs, rapid polymerization of styrene within the nanoemulsion was successfully initiated by external laser irradiation. The prepared nanocomposites inherited the photothermal activity of AuNCs and exhibited good photothermal stability and repeatability. This approach not only facilitates remote control of chemical reactions, but also optimizes the distribution of AuNCs within the final polymer matrix, thereby enabling the efficient synthesis of nanocomposites while exploiting the unique photofunctionality of AuNCs.

Preventive Activity of an Arginine-Based Surfactant on the Formation of Mixed Biofilms of Fluconazole-Resistant Candida albicans and Extended-Spectrum-Beta-Lactamase-Producing Escherichia coli on Central Venous Catheters

Background/Objectives: Mixed bloodstream infections associated with central venous catheter (CVC) use are a growing problem. The aim of this study was to evaluate the activity of a cationic arginine-based gemini surfactant, C9(LA)2, against mixed biofilms of fluconazole-resistant Candida albicans and extended-spectrum beta-lactamase (ESBL)-producing E. coli, and the preventive effect of this surfactant impregnated in CVCs on the formation of inter-kingdom biofilms. Methods: Broth microdilution assays were performed along with evaluation of the effect against mixed biofilms in formation. The impregnation of CVCs with the surfactant and with a hydrogel containing the cationic surfactant was investigated to assess their potential to prevent the formation of mixed biofilms. Scanning electron microscopy (SEM) was also utilized. Results: Minimum inhibitory concentrations (MICs) for resistant C. albicans ranged from 4-5.3 µg/mL, while for E. coli, the MICs varied from 85.3 to 298.7 µg/mL. Fungicidal and bactericidal action patterns were obtained. In mixed biofilm formation in 96-well plates, there was a significant reduction in the colony-forming unit (CFU) count. The impregnation of the CVC with C9(LA)2 alone resulted in a biofilm reduction of 62% versus C. albicans and 48.7% against E. coli in terms of CFUs. When the CVC was impregnated with the surfactant hydrogel, the effect was improved with an inhibition of 71.7% for C. albicans and 86.7% for E. coli. The images obtained by SEM corroborated the results. Conclusions: C9(LA)2 has potential for use in CVC impregnation to prevent the formation of mixed biofilms of fluconazole-resistant C. albicans and ESBL-producing E. coli.

How nanomaterials act against bacterial structures? a narrative review focusing on nanoparticle molecular mechanisms

OBJECTIVE

In recent years, significant progress has been made in the field of nanotechnology for the treatment and prevention of biofilm formation and Multidrug-resistant bacteria (MDR). MDR bacteria challenges is hazardous when microorganisms induce the formation of biofilms, which amplify resistance to antibiotics and promote the development of multidrug-resistant conditions. The unique physicochemical properties of certain nanomaterials make nanotechnology a promising option for combating MDR infections. Several studies have introduced nanomaterials with different antibacterial mechanisms that can effectively destroy MDR bacteria and their biofilms. This study reviews the research results, focusing on the various nanoparticle mechanisms that target bacterial structures.

METHOD

To accomplish this study, we conducted investigations to gather articles and relevant studies from validated medical databases such as Scopus, PubMed, Google Scholar, and Web of Science. The selected publications from 2007 to 2023. In this review, we provide a brief overview of nanoparticles, their mechanisms, and how they function against the structure of bacteria. Furthermore, we discuss the recent advancements in using certain nanoparticles to combat infection-induced biofilms and complications caused by multidrug resistance.

FINDING

Our findings demonstrate that various nanoparticles have the potential to effectively overcome bacterial infectious diseases by targeting biofilms and antibiotic-resistant strains. Additionally, the development of a new drug delivery approach based on nanosystems shows promise in overcoming antibiotic resistance and biofilms.

Rapid Photoinduced Self-Healing, Controllable Drug Release, Skin Adhesion Ability, and Mechanical Stability of Hydrogels Incorporating Linker-Modified Gold Nanoparticles and Nanogels

Appropriately modified thermoresponsive hydrogels, such as poly(N-isopropylacrylamide) hydrogels, bring an opportunity for a variety of biomedical applications. Incorporating compounds with different properties into poly(N-isopropylacrylamide) hydrogels offers opportunities to enhance their mechanical, self-healing ability, adhesiveness, thermal responsiveness, and drug release capabilities. In this study, we investigated the influence of Au-sulfur interactions on the properties of the poly(N-isopropylacrylamide) hydrogels after introducing N,N'-bis(acryloyl)cystine (a newly synthesized cross-linker), modified gold nanoparticles, and a p(NIPAm-BISS) nanogel into the hydrogel matrix. Our findings demonstrated that poly(N-isopropylacrylamide) hydrogels with these compounds exhibited higher mechanical strength (65% tensile stress and 25% elongation), faster thermal responsiveness, controllable self-healing [85% recovery after 2 min, using a NIR laser (800 nm, 0.75 W)], skin adhesiveness, and enhanced drug release (0.08 mg·mL-1, a 93% improvement). These results may contribute to advancements in the design of temperature-responsive hydrogels tailored for specific biomedical needs, such as targeted drug delivery with the use of a NIR laser and tissue engineering.

Advances in stimuli-responsive injectable hydrogels for biomedical applications

Injectable hydrogels, as a class of highly hydrated soft materials, are of interest for biomedicine due to their precise implantation and minimally invasive local drug delivery at the implantation site. The combination of in situ gelation ability and versatile therapeutic agent/cell loading capabilities makes injectable hydrogels ideal materials for drug delivery, tissue engineering, wound dressing and tumor treatment. In particular, the stimuli-responsive injectable hydrogels that can respond to different stimuli in and out of the body (e.g., temperature, pH, redox conditions, light, magnetic fields, etc.) have significant advantages in biomedicine. Here, we summarize the design strategies, advantages, and recent developments of stimuli-responsive injectable hydrogels in different biomedical fields. Challenges and future perspectives of stimuli-responsive injectable hydrogels are also discussed and the future steps necessary to fulfill the potential of these promising materials are highlighted.

Photothermal Antibacterial and Osteoinductive Polypyrrole@Cu Implants for Biological Tissue Replacement

The treatment of bone defects caused by disease or accidents through the use of implants presents significant clinical challenges. After clinical implantation, these materials attract and accumulate bacteria and hinder the integration of the implant with bone tissue due to the lack of osteoinductive properties, both of which can cause postoperative infection and even lead to the eventual failure of the operation. This work successfully prepared a novel biomaterial coating with multiple antibacterial mechanisms for potent and durable and osteoinductive biological tissue replacement by pulsed PED (electrochemical deposition). By effectively regulating PPy (polypyrrole), the uniform composite coating achieved sound physiological stability. Furthermore, the photothermal analysis showcased exceptional potent photothermal antibacterial activity. The antibacterial assessments revealed a bacterial eradication rate of 100% for the PPy@Cu/PD composite coating following a 24 h incubation. Upon the introduction of NIR (near-infrared) irradiation, the combined effects of multiple antibacterial mechanisms led to bacterial reduction rates of 99% for E. coli and 98% for S. aureus after a 6 h incubation. Additionally, the successful promotion of osteoblast proliferation was confirmed through the application of the osteoinductive drug PD (pamidronate disodium) on the composite coating's surface. Therefore, the antimicrobial Ti-based coatings with osteoinductive properties and potent and durable antibacterial properties could serve as ideal bone implants.

Recent progress in hydrogels combined with phototherapy for bacterial infection: A review

Phototherapy has become one of the most effective antibacterial methods due to its associated lack of drug resistance and its good antibacterial effect. For the purpose of avoiding the aggregation and premature release of photosensitive/photothermal agents during phototherapy, they can be mixed into three-dimensional hydrogels. The combination of hydrogels and phototherapy combines the merits of both hydrogels and phototherapy, overcomes the disadvantages of traditional antibacterial methodologies, and has broad application prospects. This review presents recent advancements in phototherapeutic antibacterial hydrogels including photodynamic antibacterial hydrogels, photothermal antibacterial hydrogels, photodynamic and photothermal synergistic antibacterial hydrogels, and other synergistic antibacterial hydrogels involving phototherapy.

Nanomaterials for Photothermal Antimicrobial Surfaces

Microbial infection diseases are a major threat to human health and have become one of the main causes of mortality. The search for novel antimicrobial strategies is an important challenge for the scientific community, considering also the constant increase of antimicrobial resistance and the rise of new diseases. Among the new strategies to combat microbial infections, the photothermal effect seems to be one of the most promising. Hyperthermia is an effective and broad spectrum strategy for the removal of microbial infections. Among all of the strategies to reduce the diffusion of microbial infections, the preparation of antimicrobial surfaces seems of primary importance. In many cases, in fact, an infection can be diffused through surfaces just by touching them, or by inoculating microbes through an internalizable device, such as an implant, a prosthesis, or a catheter. In this review, we will summarize the recent advances in the preparation of photothermal antibacterial surfaces.

Amphiphilic nanofibrillated cellulose/polyurethane composites with antibacterial, antifouling and self-healing properties for potential catheter applications

This study focuses on enhancing interventional medical devices, specifically catheters, using a novel composite material. Challenges like corrosion and contamination in vivo, often caused by body fluids' pH, bacteria, and proteins, lead to mechanical damage, bacterial colonization, and biofilm formation on devices like catheters. The objective of this study was to prepare a versatile composite (HFs) by designing polyurethanes (HPU) with an ionic chain extender (HIID) and blending them with amphiphilic nanofibrillated cellulose (Am-CNF). The composite leverages dynamic interactions such as hydrogen bonding and electrostatic forces, as evidenced by Molecular Mechanics (MM) calculations. The H4F0.75 composite exhibited exceptional properties: 99 % length recovery post 600 stretching cycles at 100 % strain, rapid self-healing in artificial urine, high bactericidal activity, and excellent cell viability. Moreover, mechanical aging tests and UV-vis spectral analysis confirmed the material's durability and safety. These findings suggest that the HFs composite holds significant promise for improving catheters' performance in medical applications.

Photothermal hydrogels for infection control and tissue regeneration

In this review, we report investigating photothermal hydrogels, innovative biomedical materials designed for infection control and tissue regeneration. These hydrogels exhibit responsiveness to near-infrared (NIR) stimulation, altering their structure and properties, which is pivotal for medical applications. Photothermal hydrogels have emerged as a significant advancement in medical materials, harnessing photothermal agents (PTAs) to respond to NIR light. This responsiveness is crucial for controlling infections and promoting tissue healing. We discuss three construction methods for preparing photothermal hydrogels, emphasizing their design and synthesis, which incorporate PTAs to achieve the desired photothermal effects. The application of these hydrogels demonstrates enhanced infection control and tissue regeneration, supported by their unique photothermal properties. Although research progress in photothermal hydrogels is promising, challenges remain. We address these issues and explore future directions to enhance their therapeutic potential.

In vitro influence of PEG functionalized ZnO-CuO nanocomposites on bacterial growth

Polyethyleneglycol-coated biocompatible CuO-ZnO nanocomposites were fabricated hydrothermally varying Zn:Cu ratios as 1:1, 2:1, and 1:2, and their antibacterial activity was determined through the well diffusion method against the Gram-negative Escherichia coli, Pseudomonas aeruginosa, Klebsiella pneumoniae, and the Gram-positive Staphylococcus aureus. The minimum inhibitory concentration and the minimum bactericidal concentration values of the synthesized samples were determined. Subsequently, the time synergy kill assay was performed to elucidate the nature of the overall inhibitory effect against the aforementioned bacterial species. The mean zone of inhibition values for all four samples are presented. The inhibitory effect increased with increasing concentration of the nanocomposite (20, 40 and 60 mg/ml) on all the bacterial species except for S. aureus. According to the MBC/MIC ratio, ZnO was found to be bacteriostatic for E. coli and P. aeruginosa, and bactericidal for S. aureus and K. pneumoniae. Zn:Cu 2:1 was bactericidal on all bacterial species. A bacteriostatic effect was observed on E. coli and P. aeruginosa in the presence of Zn:Cu 1:1 whereas, it showed a bactericidal effect on S. aureus and K. pneumoniae. Zn:Cu 1:2 exhibited a bacteriostatic effect on E. coli while a bactericidal effect was observed for E. coli, P. aeruginosa, and K. pneumoniae. The metal oxide nanocomposites were found to be more sensitive towards the Gram-positive strain than the Gram-negative strains. Further, all the nanocomposites possess anti-oxidant activity as shown by the DPPH assay.

Functional fluorescent nanomaterials for the detection, diagnosis and control of bacterial infection and biofilm formation: Insight towards mechanistic aspects and advanced applications

Infectious diseases resulting from the high pathogenic potential of several bacteria possesses a major threat to human health and safety. Traditional methods used for screening of these microorganisms face major issues with respect to detection time, selectivity and specificity which may delay treatment for critically ill patients past the optimal time. Thus, a convincing and essential need exists to upgrade the existing methodologies for the fast detection of bacteria. In this context, increasing number of newly emerging nanomaterials (NMs) have been discovered for their effective use and applications in the area of diagnosis in bacterial infections. Recently, functional fluorescent nanomaterials (FNMs) are extensively explored in the field of biomedical research, particularly in developing new diagnostic tools, nanosensors, specific imaging modalities and targeted drug delivery systems for bacterial infection. It is interesting to note that organic fluorophores and fluorescent proteins have played vital role for imaging and sensing technologies for long, however, off lately fluorescent nanomaterials are increasingly replacing these due to the latter's unprecedented fluorescence brightness, stability in the biological environment, high quantum yield along with high sensitivity due to enhanced surface property etc. Again, taking advantage of their photo-excitation property, these can also be used for either photothermal and photodynamic therapy to eradicate bacterial infection and biofilm formation. Here, in this review, we have paid particular attention on summarizing literature reports on FNMs which includes studies detailing fluorescence-based bacterial detection methodologies, antibacterial and antibiofilm applications of the same. It is expected that the present review will attract the attention of the researchers working in this field to develop new engineered FNMs for the comprehensive diagnosis and treatment of bacterial infection and biofilm formation.

Seedless wet synthesis of copper-twinned nanocrystals

The wet synthesis of copper (Cu)-twinned nanostructures often requires the addition of noble metal seeds, as twinned Cu seeds are prone to oxidative etching, which inevitably introduces other metal species. In this study, a universal and seedless wet method is proposed for the synthesis of various Cu-twinned nanostructures, such as large Cu decahedrons (with sizes up to 300 nm), singly twinned Cu right bipyramids, and Cu nanorods. The amount of chloride ions (Cl-) and oleylamine and an optimal heating rate at the initial stage were proven to be crucial in this synthesis. Theoretical results revealed that the amount of Cl- could adjust the Gibbs free energy of Cu seeds by promoting the dissociation of oleylamine, which, in turn, determined the structure of thermodynamically favorable seeds based on the thermodynamic model. To the best of our knowledge, this is the first report on large Cu decahedrons and singly twinned Cu right bipyramids. Moreover, they both showed strong localized surface plasmon resonance in the near-infrared region. The photothermal conversion efficiency of large Cu decahedrons increased up to 52.9% upon 808 nm laser irradiation, which is the highest value ever reported for Cu nanocrystals.

Recent advance on nanoparticles or nanomaterials with anti-multidrug resistant bacteria and anti-bacterial biofilm properties: A systematic review

Objective

With the wide spread of Multidrug-resistant bacteria (MDR) due to the transfer and acquisition of antibiotic resistance genes and the formation of microbial biofilm, various researchers around the world are looking for a solution to overcome these resistances. One potential strategy and the best candidate to overcome these infections is using an effective nanomaterial with antibacterial properties against them.

Methods

and analysis: In this study, we overview nanomaterials with anti-MDR bacteria and anti-biofilm properties. Hence, we systematically explored biomedical databases (Web of Sciences, Google Scholar, PubMed, and Scopus) to categorize related studies about nanomaterial with anti-MDR bacteria and anti-biofilm activities from 2007 to December 2022.

Results

In total, forty-one studies were investigated to find antibacterial and anti-biofilm information about the nanomaterial during 2007-2022. According to the collected documents, nineteen types of nanomaterial showed putative antibacterial effects such as Cu, Ag, Au, Au/Pt, TiO2, Al2O3, ZnO, Se, CuO, Cu/Ni, Cu/Zn, Fe3O4, Au/Fe3O4, Au/Ag, Au/Pt, Graphene O, and CuS. In addition, seven types of them considered as anti-biofilm agents such as Ag, ZnO, Au/Ag, Graphene O, Cu, Fe3O4, and Au/Ag.

Conclusion

According to the studies, each of nanomaterial has been designed with different methods and their effects against standard strains, clinical strains, MDR strains, and bacterial biofilms have been investigated in-vitro and in-vivo conditions. In addition, nanomaterials have different destructive mechanism on bacterial structures. Various nanoparticles (NP) introduced as the best candidate to designing new drug and medical equipment preventing infectious disease outbreaks by overcome antibiotic resistance and bacterial biofilm.

A 0D-2D Heterojunction Bismuth Molybdate-Anchored Multifunctional Hydrogel for Highly Efficient Eradication of Drug-Resistant Bacteria

Due to the increasing antibiotic resistance and the lack of broad-spectrum antibiotics, there is an urgent requirement to develop fresh strategies to combat multidrug-resistant pathogens. Herein, defect-rich bismuth molybdate heterojunctions [zero-dimensional (0D) Bi4MoO9/two-dimensional (2D) Bi2MoO6, MBO] were designed for rapid capture of bacteria and synergistic photocatalytic sterilization. The as-prepared MBO was experimentally and theoretically demonstrated to possess defects, heterojunctions, and irradiation triple-enhanced photocatalytic activity for efficient generation of reactive oxygen species (ROS) due to the exposure of more active sites and separation of effective electron-hole pairs. Meanwhile, dopamine-modified MBO (pMBO) achieved a positively charged and rough surface, which conferred strong bacterial adhesion and physical penetration to the nanosheets, effectively trapping bacteria within the damage range and enhancing ROS damage. Based on this potent antibacterial ability of pMBO, a multifunctional hydrogel consisting of poly(vinyl alcohol) cross-linked tannic acid-coated cellulose nanocrystals (CPTB) and pMBO, namely CPTB@pMBO, is developed and convincingly effective against methicillin-resistant Staphylococcus aureus in a mouse skin infection model. In addition, the strategy of combining a failed beta-lactam antibiotic with CPTB@pMBO to photoinactivation with no resistance observed was developed, which presented an idea to address the issue of antibiotic resistance in bacteria and to explore facile anti-infection methods. In addition, CPTB@pMBO can reduce excessive proteolysis of tissue and inflammatory response by regulating the expression of genes and pro-inflammatory factors in vivo, holding great potential for the effective treatment of wound infections caused by drug-resistant bacteria.

Photothermal therapeutic ability of copper open-shell nanostructures that are effective in the second biological transparency window based on symmetry breaking-induced plasmonic properties

In this study, a photothermal therapy agent that works efficiently in the second biological transparency window was developed based on the localized surface plasmon (LSP) resonance of symmetry-broken open-shell nanostructures of low-cost Cu (CuOSNs). The strong LSP resonance and superior photothermal conversion ability in the second biological transparency window were achieved by generating the dipolar bonding mode due to the plasmon hybridization between the nanoshell dipole and the nanohole dipole at the opening edge in CuOSNs derived from the symmetry breaking of a Cu nanoshell. Oxidative dissolution of CuOSNs in water was significantly suppressed by successive coating with the self-assembled monolayer of 16-mercaptohexadecanoic acid and a thin silica layer. Furthermore, the stability in phosphate buffered saline, which models the biological environment, was attained by further coating the nanoparticles with polyethylene glycol. It was demonstrated from in vitro cell tests using HeLa cells that the cytotoxicity of CuOSNs was effectively suppressed by the surface protection. The viability of HeLa cells incubated with CuOSNs was decreased under the irradiation of low intensity 1060 nm laser with increasing number of CuOSNs. These results demonstrate that low-cost symmetry-broken Cu-based nanostructures can act as an excellent photothermal therapy agent in the second biological transparency window.

Self-healing hydrogels for bone defect repair

Severe bone defects can be caused by various factors, such as tumor resection, severe trauma, and infection. However, bone regeneration capacity is limited up to a critical-size defect, and further intervention is required. Currently, the most common clinical method to repair bone defects is bone grafting, where autografts are the "gold standard." However, the disadvantages of autografts, including inflammation, secondary trauma and chronic disease, limit their application. Bone tissue engineering (BTE) is an attractive strategy for repairing bone defects and has been widely researched. In particular, hydrogels with a three-dimensional network can be used as scaffolds for BTE owing to their hydrophilicity, biocompatibility, and large porosity. Self-healing hydrogels respond rapidly, autonomously, and repeatedly to induced damage and can maintain their original properties (i.e., mechanical properties, fluidity, and biocompatibility) following self-healing. This review focuses on self-healing hydrogels and their applications in bone defect repair. Moreover, we discussed the recent progress in this research field. Despite the significant existing research achievements, there are still challenges that need to be addressed to promote clinical research of self-healing hydrogels in bone defect repair and increase the market penetration.

Guar gum-based nanoformulations: Implications for improving drug delivery

Poorly soluble drugs are reported to easily degrade in the gastrointestinal tract and contribute in limiting the effect of drug to its targeted site. Oral administration of drug is one of the prominent ways to deliver a drug, although, it experiences barriers like acidic pH, presence of microflora and enzymes in the gastrointestinal tract. Collectively all of these participate in the degradation of drug before it reaches its target site and thus, they impede the sustained effect of drug. A quest of choosing a polymer with good stability profile and releasing the drug to its targeted site is always been a challenge for the scientists worldwide. Many polymers have been reported to prevent the degradation of drug and one such naturally occurring biocompatible polymer is guar gum. Guar gum-based nanoformulations have been extensively used in past decades to achieve controlled drug release which defines its importance. The coating of guar gum over the drug improves the bioavailability of the drug and thus helps in minimizing the risk of drug degradation. This review intends to highlight the beneficial role of guar gum-based nanoformulations to improve drug delivery by ameliorating the bioavailibility.

Promoting photothermal antibacterial activity through an excited-state intramolecular proton transfer process

The construction of an efficient photothermal antibacterial platform is a promising strategy for the treatment of drug-resistant bacterial infections. Herein, through the introduction of excited-state intramolecular proton transfer to promote the photothermal effect, N-(2,4-dihydroxybenzylidene)-4-aminophenol (DOA)-polyvinyl alcohol (PVA) systems (DPVA) can reach 55 °C within 10 s under irradiation. They show superior antibacterial behavior against drug-resistant bacteria and a therapeutic effect on infected skin wounds with only 100 s of irradiation, much faster than those of reported photothermal materials (5-10 min). This work provides a convenient approach to fabricate broad-spectrum antibacterial wound dressings for treating bacteria-infected wounds, greatly contributing to the design and applications of photothermal antibacterial platforms.

Nucleopeptide-Coupled Injectable Bioconjugated Guanosine-Quadruplex Hydrogel with Inherent Antibacterial Activity

The multicomponent reaction-directed self-assembled hydrogels offer the opportunities to fabricate materials with ubiquitous properties which sometimes are not possible to generate from single components. Therefore, multicomponent-derived hydrogels have enormous applications in biomedical fields, and the number of such systems is increasing day by day. Herein, the multicomponent self-assembly techniques have been employed to develop a biomimetic low-molecular-weight G-quadruplex hydrogel under physiological conditions. The bioconjugation of guanosine, 4-formylphenylboronic acid, and cytosine-functionalized nucleopeptide (NP) is important to generate the multicomponent self-assembled dynamic imino-boronate ester-mediated bioconjugated G-quadruplex hydrogels. Using thioflavin T fluorescence assay, powder X-ray diffraction, and circular dichroism spectroscopic techniques, we confirm the existence of a G-quartet-like structure as the key parameter for the formation of nanofibrillar hydrogels. The multicomponent self-assembled G-quadruplex hydrogel possesses excellent inherent antibacterial activity against a broad range of bacterial species. The in vitro cytocompatibility of the synthesized hydrogel was evaluated on MCF-7 and HEK 293T cell lines to study the biocompatibility of the hydrogel. The proposed injectable, biocompatible, and NP-coupled G-quadruplex hydrogel with inherent antibacterial efficiency holds promising importance to prevent localized bacterial infections.

Biomembrane-Based Nanostructure- and Microstructure-Loaded Hydrogels for Promoting Chronic Wound Healing

Wound healing is a complex and dynamic process, and metabolic disturbances in the microenvironment of chronic wounds and the severe symptoms they cause remain major challenges to be addressed. The inherent properties of hydrogels make them promising wound dressings. In addition, biomembrane-based nanostructures and microstructures (such as liposomes, exosomes, membrane-coated nanostructures, bacteria and algae) have significant advantages in the promotion of wound healing, including special biological activities, flexible drug loading and targeting. Therefore, biomembrane-based nanostructure- and microstructure-loaded hydrogels can compensate for their respective disadvantages and combine the advantages of both to significantly promote chronic wound healing. In this review, we outline the loading strategies, mechanisms of action and applications of different types of biomembrane-based nanostructure- and microstructure-loaded hydrogels in chronic wound healing.

Indocyanine Green Performance Enhanced System for Potent Photothermal Treatment of Bacterial Infection

The instability in solution and aggregation-induced self-quenching of indocyanine green (ICG) have weakened its fluorescence and photothermal properties, thus inhibiting its application in practice. In this study, the cationic and anionic liposomes containing ICG were prepared based on 1,2-dioleoyl-3-trimethylammonium-propane (DOTAP) and 1,2-dipalmitoyl-sn-glycero-3-phospho-rac-glycerol (DPPG), respectively. Molecular dynamics (MD) simulations demonstrate that ICG molecules are better distributed in the membranes of cationic DOTAP-based liposomes, leading to a superior fluorescence and photothermal performance. The liposomal ICG also shows the physical and photothermal stability during irradiation and long-term storage. On this basis, the prepared DOTAP-based liposomal ICG was encapsulated in the self-healing hydrogel formed by guar gum through the borate/diol interaction. The proposed liposomal ICG-loaded hydrogel can not only convert near-infrared (NIR) light into heat effectively but also repair itself without external assistance, which will realize potent photothermal therapy (PTT) against bacterial infection and provide the possibility for meeting the rapidly growing needs of modern medicine.

Photothermal nanohybrid hydrogels for biomedical applications

In the past decades, diseases such as wound infection, cancer, bone defect and osteoarthritis have constantly threatened the public health. However, the traditional treatment has many insufficiencies, such as high cost, easy recurrence and high biological toxicity. Hydrogel is a material with three-dimensional network structure, which has a series of advantages, such as injectability, self-heal ability, easy loading and controllability of drug release, and excellent biocompatibility. Therefore, it is extensively used in drug delivery, antibacterial, anti-cancer and other fields. However, the traditional hydrogels have the single performance, and therapeutic efficacy is often rely on the drugs loaded on them to cure diseases, which cannot achieve sustainable therapeutic effect. In order to solve this problem, photothermal nano hydrogel with photothermal agent (PTA) has become an ideal material due to its excellent physical and chemical properties. Photothermal nano hydrogels used in photothermal therapy (PTT) can exploit the photothermal effect of photothermal agent to increase local temperature and control the sol-gel phase transition behavior of hydrogels, so they are widely used in drug release, photothermal sterilization, photothermal inhibition of cancer cells and enhancement of bone repair. To sum up, this paper introduces the preparation of hydrogels with photothermal nanomaterials, and discusses their applications in the fields of drug release, photothermal sterilization, photothermal cancer cell inhibition and enhanced bone repair.

Chloride-ion-directed synthesis of plate-like Cu2O mesocrystals for effective nitrogen fixation

Cuprous oxide (Cu₂O) mesocrystals, which are composed of numerous nanocrystals with a common crystallographic orientation, are supposed to possess superior photocatalytic abilities than the normal constructions, but very few of them have been reported to date. In this work, plate-like Cu₂O mesocrystals were successfully fabricated via a facile one-pot wet chemical strategy. Unlike the commonly used polymers or small molecules, chloride ions (Cl^-) were employed as structure-directing agents and played the main role in the Cu₂O mesocrystal formation. The formation mechanism was interpreted as follows: the presence of Cl^- inhibited the formation of CuO and Cu by forming the intermediate product CuCl, which was further hydrolyzed to Cu₂O nanocrystals. Cl^- tended to adsorb on the (111) facets of the formed Cu₂O nanocrystals and stabilize them. Then the Cu₂O nanocrystals were aligned side by side through the unabsorbed side faces, leading to mutual nanocrystals orientation and crystallographic lock-in, facilitating the formation of plate-like Cu₂O mesocrystals. The polymer, polyacrylamide (PAM), also promoted the mesocrystals formation by serving as a stabilizer and fixed the crystallographic orientation of the Cu₂O nanocrystals during their orderly stacking process. The plate-like Cu₂O mesocrystals showed a long decay time and pronounced performance toward the visible-light-driven photocatalytic reduction of N₂ into NH₃. This research may stimulate in-depth investigations into the exploration of new synthetic methods for the design and construction of novel mesocrystals.

Injectable Hydrogel-Based Combination Cancer Immunotherapy for Overcoming Localized Therapeutic Efficacy

Various immunotherapeutic agents that can elicit antitumor immune responses have recently been developed with the potential for improved efficacy in treating cancer. However, insufficient delivery efficiency at the tumor site, along with severe side effects after systemic administration of these anticancer agents, have hindered their therapeutic application in cancer immunotherapy. Hydrogels that can be directly injected into tumor sites have been developed to help modulate or elicit antitumor responses. Based on the biocompatibility, degradability, and controllable mechanochemical properties of these injectable hydrogels, various types of immunotherapeutic agents, such as hydrophobic anticancer drugs, cytokines, antigens, and adjuvants, have been easily and effectively encapsulated, resulting in the successful elicitation of antitumor immune responses and the retention of long-term immunotherapeutic efficacy following administration. This review summarizes recent advances in combination immunotherapy involving injectable hydrogel-based chemoimmunotherapy, photoimmunotherapy, and radioimmunotherapy. Finally, we briefly discuss the current limitations and future perspectives on injectable hydrogels for the effective combination immunotherapy of tumors.

Interpenetrating Polymer Network Hydrogels Formed Using Antibiotics as a Dynamic Crosslinker for Treatment of Infected Wounds

Antibacterial hydrogels, particularly antibiotic-loaded hydrogels, are promising wound dressing materials for treatment of bacteria-infected wound. However, it is challenging to achieve sustained release of antibiotics from hydrogels through physical encapsulation of the antibiotics. Herein, an interpenetrating polymer network P(AA-co-HEMA)_Gen hydrogel is reported with double crosslinking formed by free radical polymerization of 2-hydroxyethyl methacrylate (HEMA) and acrylic acid (AA), while using the antibiotic gentamicin (Gen) as the dynamic physical crosslinker. Gentamicin is incorporated into the hydrogel networks via electrostatic interaction between the carboxyl groups of poly(acrylic acid) and the amino groups of gentamicin, which leads to pH-responsive drug release and a significant increase in mechanical strength (i.e., elastic modulus, viscous modulus, and compressive modulus). More importantly, the hydrogels with optimal compositions demonstrate long-lasting antibacterial activity against both Gram-positive bacteria (Staphylococcus aureus) and Gram-negative bacteria (Escherichia coli) over 28 d. The in vivo studies that are conducted in an S. aureus-infected full-thickness skin wound model demonstrate that the double crosslinking hydrogels loaded with gentamicin eliminate bacteria in the wounds more effectively and significantly accelerate wound healing as compared to 3M dressing and the control without any treatment. Taken together, this antibiotic-loaded interpenetrating polymer network hydrogel is potentially a promising wound dressing material for the treatment of bacteria-infected wound.

Multifunctional hydrogel platform for biofilm scavenging and O2 generating with photothermal effect on diabetic chronic wound healing

Diabetic wound treatment remains a major challenge due to the difficulties of eliminating bacterial biofilm and relieving wound hypoxia. To address these issues simultaneously, a multifunctional Dex-SA-AEMA/MnO₂/PDA (DSAMP) hydrogel platform was developed with excellent biocompatibility and porous structure. The hydrogel could absorb the exudate, maintain humidity and permeate oxygen, which was prepared by encapsulating polydopamine (PDA) and manganese dioxide (MnO₂) into Dex-SA-AEMA (DSA) hydrogel by UV irradiation. With the addition of PDA, the DSAMP hydrogel was proved to eliminate the biofilm after NIR photodynamic therapy (PTT, 808 nm) irradiation at 54 °C. Furthermore, in order to mitigate hypoxia wound microenvironment, MnO₂ nanoparticles were added to convert the endogenous hydrogen peroxide (H₂O₂) into oxygen (O₂, 16 mg L^-1). The diabetic wound in vivo treated by DSAMP hydrogel was completely healed on 14 days. It was revealed that the DSAMP hydrogel possessed a great potential as dressing for diabetic chronic wound healing.

Dendritic Hydrogels with Robust Inherent Antibacterial Properties for Promoting Bacteria-Infected Wound Healing

Bacterial infections are a common problem associated with wound treatment that imposes a significant burden on healthcare systems and patients. As a result, healthcare providers urgently need new treatment strategies to protect people. Hydrogel biomaterials with inherent antimicrobial properties offer an attractive and viable solution to this issue. Here, for the first time, we have developed a new efficient synthetic strategy to prepare cationic hydrogels (PHCI) with intrinsically efficient antimicrobial properties by chemically cross-linking trans-1,4-cyclohexanediamine with 1,3-dibromo-2-propanol using a condensation reaction without the use of toxic cross-linking agents. As expected, the prepared PHCI hydrogel possessed an inherent antibacterial ability that can adsorb and kill Staphylococcus aureus and Escherichia coli electrostatically. Notably, in vivo experiments on normal and diabetic rat models confirmed that the PHCI hydrogel can quickly stop bleeding, efficiently kill bacteria, promote the conversion of macrophages from the proinflammatory M1 phenotype to the repaired M2 phenotype, and accelerate collagen deposition and blood vessel formation, thereby achieving rapid wound healing. Overall, this work presents an effective antibacterial dressing that might provide a facile but effective approach for clinical wound management.

An efficient photothermal-chemotherapy platform based on polyacrylamide/phytic acid/polydopamine hydrogel

In this work, the polyacrylamide/phytic acid/polydopamine (termed as, PAAM/PA/PDA) hydrogel is used as drug loading matrix and photothermal conversion reagent, which is prepared by copolymerization of dopamine with acrylamide through...

Recent advances in metal-organic framework-based materials for anti-staphylococcus aureus infection

The rapid spread of staphylococcus aureus (S. aureus) causes an increased morbidity and mortality, as well as great economic losses in the world. Anti-S. aureus infection becomes a major challenge for clinicians and nursing professionals to address drug resistance. Hence, it is urgent to explore high efficiency, low toxicity, and environmental-friendly methods against S. aureus. Metal-organic frameworks (MOFs) represent great potential in treating S. aureus infection due to the unique features of MOFs including tunable chemical constitute, open crystalline structure, and high specific surface area. Especially, these properties endow MOF-based materials outstanding antibacterial effect, which can be mainly attributed to the continuously released active components and the exerted catalytic activity to fight bacterial infection. Herein, the structural characteristics of MOFs and evaluation method of antimicrobial activity are briefly summarized. Then we systematically give an overview on their recent progress on antibacterial mechanisms, metal ion sustained-release system, controlled delivery system, catalytic system, and energy conversion system based on MOF materials. Finally, suggestions and direction for future research to develop and mechanism understand MOF-based materials are discussed in antibacterial application.

Preparation of Quantum Dot-Embedded Photonic Crystal Hydrogel and Its Application as Fluorescence Sensor for the Detection of Nitrite

The development of fluorescence sensing platforms with excellent photoluminescence capabilities is of great importance for their further application. In this work, a photonic crystal structure was successfully applied to enhance the luminescence performance of fluorescent hydrogel, and the application of the obtained hydrogel as a fluorescence sensor was explored. A polystyrene photonic crystal template was constructed via vertical deposition self-assembly; then, the precursor solution containing polyethylenimine-capped CdS quantum dots (PEI-CdS QDs) and monomers filled in the gap of the template. After the polymerization process, the desired hydrogel was obtained. PEI-CdS QDs endowed the hydrogel with its fluorescence property, while interestingly, the photonic crystal structure showed a significant enhancement effect on the fluorescence-emission capability. The mechanism of this phenomenon was revealed. Moreover, this hydrogel could be used as a reusable fluorescence sensor for the detection of nitrite in water with good selectivity. The limit of detection was determined to be 0.25 μmol/L, which is much lower than the maximum limit for nitrite in drinking water.

Photoactivatable Nitric Oxide-Releasing Gold Nanocages for Enhanced Hyperthermia Treatment of Biofilm-Associated Infections

With the increasing clinical use of invasive medical devices, various healthcare-associated infections (HAIs) caused by bacterial biofilm colonization of biomedical devices have posed serious threats to patients. The formation of biofilms makes it much more difficult and costly to treat infections. Here, we report a nitric oxide (NO)-releasing gold nanocage (AuNC@NO) that is stimulated by near-infrared (NIR) irradiation to deliver NO and generate hyperthermia for biofilm elimination. AuNC@NO was prepared by immobilizing a temperature-responsive NO donor onto gold nanocages (AuNCs) through thiol-gold interactions. AuNC@NO possesses stable and excellent photothermal conversion efficiency, as well as the characteristics of slow NO release at physiological temperature and on-demand quick NO release under NIR irradiation. Based on these features, AuNC@NO exhibits enhanced in vitro bactericidal and antibiofilm efficacy compared with AuNCs, which could achieve 4 orders of magnitude bacterial reduction and 85.4% biofilm elimination under NIR irradiation. In addition, we constructed an implant biofilm infection model and a subcutaneous biofilm infection model to evaluate the anti-infective effect of AuNC@NO. The in vivo results indicated that after 5 min of 0.5 W cm^-2 NIR irradiation, NO release from AuNC@NO was significantly accelerated, which induced the dispersal of methicillin-resistant Staphylococcus aureus (MRSA) biofilms and synergized with photothermal therapy (PTT) to kill planktonic MRSA that had lost its biofilm protection. Meanwhile, the surrounding tissues showed little damage because of controlled photothermal temperature and toxicity. In view of the above-mentioned results, the AuNC@NO nanocomposite developed in this work reveals potential application prospects as a useful antibiofilm agent in the field of biofilm-associated infection treatment.

Self-Healing Hydrogels: Preparation, Mechanism and Advancement in Biomedical Applications

Polymeric hydrogels are widely explored materials for biomedical applications. However, they have inherent limitations like poor resistance to stimuli and low mechanical strength. This drawback of hydrogels gave rise to ''smart self-healing hydrogels'' which autonomously repair themselves when ruptured or traumatized. It is superior in terms of durability and stability due to its capacity to reform its shape, injectability, and stretchability thereby regaining back the original mechanical property. This review focuses on various self-healing mechanisms (covalent and non-covalent interactions) of these hydrogels, methods used to evaluate their self-healing properties, and their applications in wound healing, drug delivery, cell encapsulation, and tissue engineering systems. Furthermore, composite materials are used to enhance the hydrogel's mechanical properties. Hence, findings of research with various composite materials are briefly discussed in order to emphasize the healing capacity of such hydrogels. Additionally, various methods to evaluate the self-healing properties of hydrogels and their recent advancements towards 3D bioprinting are also reviewed. The review is concluded by proposing several pertinent challenges encountered at present as well as some prominent future perspectives.

Intramolecular Charge Transfer-Based Conjugated Oligomer with Fluorescence, Efficient Photodynamics, and Photothermal Activities

To develop efficient photoactive agents with satisfactory fluorescence, photodynamic, and photothermal effects is crucial for a phototherapeutic strategy to combat cancer diseases and pathogenic microbes. Herein, a water-soluble donor-acceptor-donor (D-A-D) structured conjugated oligomer was designed and synthesized, consisting of two cyclopenta-dithiophene (CDT) units as the electron donor and boron dipyrromethene (BODIPY) as the electron acceptor. Upon excitation, dual emission was observed for CDT-BODIPY with blue and red fluorescence peaks at 463 nm and at 730 nm, respectively, which was ascribed to intramolecular charge transfer (ICT). Due to the ICT effect, the singlet-to-triplet intersystem crossing rate of CDT-BODIPY was also enhanced, leading to an outstanding photodynamic behavior to produce reactive oxygen species (ROS). Meanwhile, its low bandgap also enabled it a moderate photothermal capability with a conversion efficiency of 33.1%. Taking advantage of its phototriggered activities, this conjugated oligomer exhibited an effective inhibition behavior on the pathogenic growth of Escherichia coli (E. coli), Staphylococcus aureus (S. aureus), and Candida albicans (C. albicans), which can be guided by dual-wavelength fluorescence imaging. This D-A-D type conjugated oligomer with balanced photophysical characteristics provides a promising strategy to imaging-guided photoactive therapy.

Injectable Nanocomposite Hydrogels for Cancer Therapy

Hydrogel is a kind of 3D polymer network with strong swelling ability in water and appropriate mechanical and biological properties, which make it feasible to maintain bioactive substances and has promising applications in the fields of biomaterials, soft machines, and artificial tissues. Unfortunately, traditional hydrogels prepared by chemical crosslinking have poor mechanical properties and limited functions, which limit their further application. In recent years, with the continuous development of nanoparticle research, more and more studies have combined nanoparticles with hydrogels to make up for the shortcomings of traditional hydrogels. In this article, the types and functions of hydrogels and nanomaterials are introduced first, as well as the functions and applications of injectable nanocomposite hydrogels (INHs), then the latest progress of INHs for cancer treatment is reviewed, some existing problems are summarized, and the application prospect of NHs is prospected.

Facile Synthesis of Thermo-Sensitive Composite Hydrogel with Well Dispersed Ag Nanoparticles for Application in Superior Antibacterial Infections

In this study, we have described a facile process for fabrication of multifunctional composite hydrogel, in which sodium alginate was subjected to cross-linking using Ca²⁺ derived from ZnO/CaCO₃/Ag composite nanospheres. The ZnO/CaCO₃/Ag composite nanospheres were prepared based on our previously reported AA-[Zn(OH)₄]^2- composite nanosphere reaction conducted with silver and calcium salt following hydrothermal method, that led to the disintegration and release of Ca²⁺ under acidic conditions for application as a cross-linking agentto catalyze reaction with sodium alginate. Ag nanoparticles were well-dispersed in the multifunctional composite hydrogel, exhibiting excellent antibacterial activity. Additionally, polydopamine (PDA) with photothermal effect was also added to obtain a multifunctional composite hydrogel, and this hydrogel showed photothermal conversion performance and facilitated the release of Ag⁺ to achieve the rapid antibacterial effect. Simultaneously, PDA NPs could scavenge free radicals and improve cell adhesion. All such features would promote wound healing. The potent antimicrobial activity of the prepared composite hydrogel was demonstrated in the mouse model of S. aureus infection, and biosafety of the hydrogel was confirmed by conducting histopathological examination in the mouse model. This type of multifunctional hydrogel wound dressing with photosensitive and antibacterial properties presents with broad applications and prospects in antibacterial treatment.

A Review on Hydrogels with Photothermal Effect in Wound Healing and Bone Tissue Engineering

Photothermal treatment (PTT) is a promising strategy to deal with multidrug-resistant bacteria infection and promote tissue regeneration. Previous studies demonstrated that hyperthermia can effectively inhibit the growth of bacteria, whereas mild heat can promote cell proliferation, further accelerating wound healing and bone regeneration. Especially, hydrogels with photothermal properties could achieve remotely controlled drug release. In this review, we introduce a photothermal agent hybrid in hydrogels for a photothermal effect. We also summarize the potential mechanisms of photothermal hydrogels regarding antibacterial action, angiogenesis, and osteogenesis. Furthermore, recent developments in photothermal hydrogels in wound healing and bone regeneration applications are introduced. Finally, future application of photothermal hydrogels is discussed. Hydrogels with photothermal effects provide a new direction for wound healing and bone regeneration, and this review will give a reference for the tissue engineering.