Pseudocapacitive Coating for Effective Capacitive Deionization

Highly Dispersed Ag Nanocrystals Anchored on N-Doped Holey Carbon Aerogel as High-Mass-Loading Electrode for Cl- Capture in Hybrid Capacitive Deionization

Nanostructured Faradaic materials show extraordinary promise for capacitive deionization (CDI) toward the relief of global freshwater scarcity. But at present, there exist at least two shortages for the development of CDI electrode materials. In laboratory studies, evaluating their desalination performance is usually based on low mass loadings (<1 mg cm-2), which is far behind the practical demand for fabricating high-mass-loading CDI electrodes or devices. On the other hand, high efficient, high active anode materials are rather scarce. Herein, highly dispersed Ag nanocrystals are synthesized on N-doped holey carbon (Ag@NHC) for use as a high-performance Cl--capture electrode at practical levels of mass loading. The Ag@NHC material is characteristic of ultrafine Ag nanocrystals with size of ≈7 nm anchored on carbon through Ag─N bonds, abundant 1-20 nm in-plane pores in carbon sheets, and an ultrahigh specific surface area (1827.9 m2 g-1). This ensures Ag@NHC electrode (at 6.4 mg cm-2 mass loading) with excellent structural and property stabilities, >80% atom-economic utilization of Ag, as well as superior Cl--capture performances. This work provides a general guideline on how to estimate the optimal mass loadings for constructing highly active CDI electrodes in the future.

Multiscale MXene Engineering for Enhanced Capacitive Deionization via Adaptive Surface Charge Tailoring

Capacitive deionization (CDI), renowned for its eco-friendly and low-energy approach to water treatment, encounters challenges in achieving optimal deionization efficiency and cycle stability despite recent advancements. In this study, the CDI electrodes were crafted with multilevel pore structures using modified cellulose (MCNF) and porous activated MXene (PAMX), aiming to the impact of surface modification on adsorption efficiency, stability, and overall performance. The experimental results demonstrated the superiority of the electrode, specifically the formulation integrating sulfonic acid-treated cellulose and PAMX (SCNF@PAMX). This configuration exhibited remarkably a higher desalination rate (3.91 mg·g-1·min-1) and enhanced desalination capacity (31.24 mg·g-1), with cycling performance exceeding 90%. Density functional theory calculations underscored the formidable adsorption energy of SCNF for Na+ (2.15 eV), surpassing that of other modified electrodes. The enhancement of deionization performance and efficiency through surface charge modification, altering Na+ electrostatic adsorption, lays a solid foundation for advancing more efficient and durable seawater desalination technologies.

Enhanced Desalination Performance Using Phosphate Buffer-Mediated Redox Reactions of Manganese Oxide Electrodes in a Multichannel System

Water desalination mediated by electrochemical reactions to directly capture and release salt at electrode materials offers a low-voltage method for producing freshwater. Developing new system designs has allowed electrode materials to maximize their capacity for salt separation, especially when a multichannel system is used to introduce a separate electrode rinse solution. Here, we show that the use of an additive can provide a new strategy for improving electrode capacity and, hence desalination performance, which so far has been limited to increasing the electrolyte concentration. A custom-built, 2/2-channel flow cell divided by two cation exchange membranes and an anion exchange membrane was fed with 50 mM NaCl as the feed (two inner channels) and 0.5 M NaCl containing up to 0.1 M phosphate as the electrode rinse (two outer channels). Using manganese oxide electrodes with phosphate buffer-mediated redox reactions exhibited an improved desalination capacity of 68.0 ± 5.2 mg g-1 (0.55 mA cm-2) and a rate of 5.6 ± 1.3 mg g-1 min-1 (0.96 mA cm-2). The improvement was attributed to the buffer that served as a proton donor for promoting the H+ insertion reaction of amorphous or poorly crystalline MnO2. Additionally, the buffering capacity against acidification and the creation of insoluble manganese phosphate on the electrode surface prevented the dissolution of Mn2+, which could otherwise occur at the anode due to a decrease in the local pH upon H+ deinsertion. Thus, the use of manganese oxide electrodes coupled with phosphate provides a new strategy of increasing electrode capacity for water desalination.

Capacitive deionization system with ultra-high salt adsorption performance: from lab design to agricultural applications

Capacitive deionization is an emerging water desalination technology for industrial applications. Recent advancements in electrode design and system development have led to the reporting of ultra-high salt adsorption performance, benefiting its potential application in agricultural water treatment at a potentially low cost. In this study, we provide a comprehensive summary of the porous electrode design strategy to achieve ultra-high ion adsorption performance, considering factors such as experimental parameters, chemically tuned material properties, redox chemistry and smart nanoarchitecture for future electrode design. Furthermore, we endeavor to establish a correlation between capacitive deionization (CDI) technology and its applicability in the agricultural sector, specifically concentrating on water treatment with an emphasis on undesirable ions associated with salinity, hardness, and heavy metals, to achieve harmless irrigation. Additionally, to ensure the efficient and cost-effective application of CDI systems in agriculture, a thorough overview of the literature on CDI cost analysis is presented. By addressing these aspects, we anticipate that ultra-high salt adsorption CDI systems hold great promise in future agricultural applications.

Effect of Surface Charge on the Fabrication of Hierarchical Mn-Based Prussian Blue Analogue for Capacitive Desalination

Multiple and hierarchical manganese (Mn)-based Prussian blue analogues obtained on different substrates are successfully prepared using a universal, facile, and simple strategy. Different functional groups and surface charge distributions on carbon cloth have significant effects on the morphologies and nanostructures of Mn-based Prussian blue analogues, thereby indirectly affecting their physicochemical properties. Combined with the advantages of the modified carbon cloth and the nanostructured Mn-based Prussian blue analogues, the composite with negative surface charge formed by the electronegativity differences shows good electrochemical properties, leading to improvement in charge efficiency during capacitive desalination. An asymmetric device fabricated with Mn-based Prussian blue analogue-modified F-doped carbon cloth as the cathode and acid-treated carbon cloth as the anode presents the highest salt adsorption capacity of 10.92 mg g^-1 with a charge efficiency of 82.28% and the lowest energy consumption of 0.45 kW h m^-3 at 1 V due to the main influencing factor from the negative surface charge leading to co-ion expulsion boosting the capacitive deionization performance. We provide insights for further exploration of the relationship between second-phase materials and carbon cloth, while offering some guidance for the design and preparation of electrodes for desalination and beyond.

Highly Selective Recovery of Phosphorus from Wastewater via Capacitive Deionization Enabled by Ferrocene-polyaniline-Functionalized Carbon Nanotube Electrodes

While capacitive deionization (CDI) is a promising technology for the recovery of nutrients from wastewater, a selective recovery of phosphate from the wastewater containing high concentrations of competing ions is still a huge challenge. Herein, we reported a ferrocene-polyaniline-functionalized carbon nanotube (Fc-PANI/CNT) electrode prepared through amidation reaction and chemical oxidation polymerization, aiming for a highly selective recovery of phosphorus from wastewater. The Fc-PANI/CNT electrode with a unique structure and high conductivity could efficiently adsorb phosphate ions from complex synthetic wastewater with a nearly 100% selectivity, mainly because the integration of ferrocene and an amide bond in Fc-PANI resulted in an enhanced charge transfer (Faradaic reactions) and a strong hydrogen bonding interaction with phosphate ions in its oxidized state. Density functional theory calculations showed that the binding energies of the oxidized Fc-PANI with HPO₄^2- and H₂PO₄^- were much greater than those of the oxidized Fc-PANI with other competing anions. The affinity of Fc-PANI/CNTs with phosphate can be controlled electrochemically based on the synergetic effects of Faradaic reactions and hydrogen bonding, enabling a selective recovery of phosphate through charging/discharging cycles. The phosphate adsorption capacity reached up to 35 mg PO₄^3- g^-1 in a NaCl/Na₂SO₄/NaNO₃/NaH₂PO₄ complex mixture at 1.2 V, outperforming most of the other reported CDI systems. The Fc-PANI/CNT electrode also exhibited a decent regeneration ability and durability during repeated CDI tests, demonstrating a great potential for the application of selective recovery and enrichment of phosphate from wastewater.

Novel Inorganic Integrated Membrane Electrodes for Membrane Capacitive Deionization

In capacitive deionization (CDI), coion repulsion and Faradaic reactions during charging reduce the charge efficiency (CE), thus limiting the salt adsorption capacity (SAC) and energy efficiency. To overcome these issues, membrane CDI (MCDI) based on the enhanced permselectivity of the anode and cathode is proposed using the ion-exchange polymer as the independent membrane or coating. To develop a novel and cost-effective MCDI system, we fabricated an integrated membrane electrode using a thin layer of the inorganic ion-exchange material coated on the activated carbon (AC) electrode, which effectively improves the ion selectivity. Montmorillonite (MT, Al₂O₉Si₃) and hydrotalcite (HT, Mg₆Al₂(CO₃)(OH)₁₆·4H₂O) were selected as the main active anion- and cation-exchange materials, respectively, for the cathode and anode. The HT-MT MCDI system employing HT-AC and MT-AC electrodes obtained a CE of 90.5% and an SAC of 15.8 mg g^-1 after 100 consecutive cycles (50 h); these values were considerably higher than those of the traditional CDI system employing pristine AC electrodes (initially, a CE of 55% and an SAC of 10.2 mg g^-1, which attenuated continuously to zero, and even "inverted work" occurs after 50 h, i.e., desorption during charging and adsorption during discharging). The HT-MT MCDI system showed moderate tolerance to organic matters during desalination and retained 84% SAC and 89% CE after 70 cycles in 50-200 mg L^-1 sodium alginate. This study demonstrates a simple and cost-effective method for fabricating high-CE electrodes for desalination with great application potential.

Frontiers of Membrane Desalination Processes for Brackish Water Treatment: A Review

Climate change, population growth, and increased industrial activities are exacerbating freshwater scarcity and leading to increased interest in desalination of saline water. Brackish water is an attractive alternative to freshwater due to its low salinity and widespread availability in many water-scarce areas. However, partial or total desalination of brackish water is essential to reach the water quality requirements for a variety of applications. Selection of appropriate technology requires knowledge and understanding of the operational principles, capabilities, and limitations of the available desalination processes. Proper combination of feedwater technology improves the energy efficiency of desalination. In this article, we focus on pressure-driven and electro-driven membrane desalination processes. We review the principles, as well as challenges and recent improvements for reverse osmosis (RO), nanofiltration (NF), electrodialysis (ED), and membrane capacitive deionization (MCDI). RO is the dominant membrane process for large-scale desalination of brackish water with higher salinity, while ED and MCDI are energy-efficient for lower salinity ranges. Selective removal of multivalent components makes NF an excellent option for water softening. Brackish water desalination with membrane processes faces a series of challenges. Membrane fouling and scaling are the common issues associated with these processes, resulting in a reduction in their water recovery and energy efficiency. To overcome such adverse effects, many efforts have been dedicated toward development of pre-treatment steps, surface modification of membranes, use of anti-scalant, and modification of operational conditions. However, the effectiveness of these approaches depends on the fouling propensity of the feed water. In addition to the fouling and scaling, each process may face other challenges depending on their state of development and maturity. This review provides recent advances in the material, architecture, and operation of these processes that can assist in the selection and design of technologies for particular applications. The active research directions to improve the performance of these processes are also identified. The review shows that technologies that are tunable and particularly efficient for partial desalination such as ED and MCDI are increasingly competitive with traditional RO processes. Development of cost-effective ion exchange membranes with high chemical and mechanical stability can further improve the economy of desalination with electro-membrane processes and advance their future applications.

Carbon-Based Capacitive Deionization Electrodes: Development Techniques and its Influence on Electrode Properties

Capacitive deionization (CDI) is a potential technology to provide cost efficient desalinated and/or softened water. Several efforts have been invested in the fabrication of CDI electrodes that not only has outstanding performance but also high chance of large scalability. In this personal account, the different techniques in developing carbon-based materials are presented together with its actual effect on the surface and electrochemical properties of carbon. The categories presented are based on the studies done by the Electrochemical Reaction and Technology Laboratory, the Ertl Center, different research groups in South Korea, and selected papers from the past three years. Our perspective about research gaps and prospects are also included with the aim to increase interest for CDI research.

Controllable synthesis of a hollow core-shell Co-Fe layered double hydroxide derived from Co-MOF and its application in capacitive deionization

Capacitive deionization (CDI) is considered one of the most promising desalination technologies for obtaining fresh water from saline water. In this work, we synthesized a hollow core-shell Co-MOF@Fe/Co-LDH (Co-Fe-LDH) material by developing a strategy to simultaneously grow Co/Fe-LDH on the surface of a Co-MOF precursor in situ. Owing to the increase in the specific surface area of the hollow structure and the Faradaic process of a layered double hydroxide (LDH), the Co-Fe-LDH material exhibits high electrical double layer (EDL) capacitance and pseudocapacitance, which significantly improves the salt adsorption of the material during CDI (34.2 mg/g in a 600 mg/L NaCl solution at 1.2 V). The adsorption for NaCl in this work is approximately 2.5 times the maximum salt adsorption capacity (SAC) of LDH materials applied in nonmembrane CDI (NMCDI). This work may provide a promising model for the application of hollow LDH materials that exhibit pseudocapacitance in CDI.

Faradaic Electrodes Open a New Era for Capacitive Deionization

Capacitive deionization (CDI) is an emerging desalination technology for effective removal of ionic species from aqueous solutions. Compared to conventional CDI, which is based on carbon electrodes and struggles with high salinity streams due to a limited salt removal capacity by ion electrosorption and excessive co-ion expulsion, the emerging Faradaic electrodes provide unique opportunities to upgrade the CDI performance, i.e., achieving much higher salt removal capacities and energy-efficient desalination for high salinity streams, due to the Faradaic reaction for ion capture. This article presents a comprehensive overview on the current developments of Faradaic electrode materials for CDI. Here, the fundamentals of Faradaic electrode-based CDI are first introduced in detail, including novel CDI cell architectures, key CDI performance metrics, ion capture mechanisms, and the design principles of Faradaic electrode materials. Three main categories of Faradaic electrode materials are summarized and discussed regarding their crystal structure, physicochemical characteristics, and desalination performance. In particular, the ion capture mechanisms in Faradaic electrode materials are highlighted to obtain a better understanding of the CDI process. Moreover, novel tailored applications, including selective ion removal and contaminant removal, are specifically introduced. Finally, the remaining challenges and research directions are also outlined to provide guidelines for future research.

In Situ Formation of Prussian Blue Analogue Nanoparticles Decorated with Three-Dimensional Carbon Nanosheet Networks for Superior Hybrid Capacitive Deionization Performance

Capacitive deionization (CDI) is considered to be an alternative water purification technology because of its low cost and low driven energy. However, the desalination performance of traditional CDI still cannot meet the requirement of actual operations, which is the limited adsorption capacity of carbon electrodes. Here, we report a feasible and simple strategy for the synthesis of a three-dimensional hierarchical composite with homogeneous Prussian blue analogue nanoparticles, decorating hierarchical porous carbon nanosheet networks (NiHCF@3DC-2) as a redox-active intercalation electrode material for hybrid capacitive deionization (HCDI). The interconnected network structure, accompanied by its unique porous characteristic and uniform NiHCF nanoparticles, endows the prepared NiHCF@3DC-2 with enough straining space for alleviating the effect of volume change upon the regeneration process and guarantees fast transmission kinetics for both electrons and salt ions. As a consequence, an HCDI cell with NiHCF@3DC-2 and activated carbon showed superior desalination ability with a high ion removal capacity of 47.8 mg g^-1 (107.5 mg g^-1 NiHCF@3DC-2) and good cyclic regenerative performance. Moreover, the Na⁺ ions storage mechanism and the interfacial synergy of the NiHCF@3DC-2 were also explored by structure and electrochemistry analyses during the CDI process. Our work provides a promising redox-active intercalation electrode material to highly efficient hybrid capacitive deionization for brine.

Brackish water desalination using reverse osmosis and capacitive deionization at the water-energy nexus

In this article, we present a critical review of the reported performance of reverse osmosis (RO) and capacitive deionization (CDI) for brackish water (salinity < 5.0 g/L) desalination from the aspects of engineering, energy, economy and environment. We first illustrate the criteria and the key performance indicators to evaluate the performance of brackish water desalination. We then systematically summarize technological information of RO and CDI, focusing on the effect of key parameters on desalination performance, as well as energy-water efficiency, economic costs and environmental impacts (including carbon footprint). We provide in-depth discussion on the interconnectivity between desalination and energy, and the trade-off between kinetics and energetics for RO and CDI as critical factors for comparison. We also critique the results of technical-economic assessment for RO and CDI plants in the context of large-scale deployment, with focus on lifetime-oriented consideration to total costs, balance between energy efficiency and clean water production, and pretreatment/post-treatment requirements. Finally, we illustrate the challenges and opportunities for future brackish water desalination, including hybridization for energy-efficient brackish water desalination, co-removal of specific components in brackish water, and sustainable brine management with innovative utilization. Our study reveals that both RO and CDI should play important roles in water reclamation and resource recovery from brackish water, especially for inland cities or rural regions.

Asymmetrical removal of sodium and chloride in flow-through capacitive deionization

Capacitive deionization (CDI) is an electrochemical method of removing salt ions from brackish water. A common assumption in CDI is that monovalent ions (e.g., Na⁺, Cl^-) are removed in a 1:1 symmetry on the electrodes. Validation of this assumption with techniques such as ion chromatography is not commonly performed, but is important to better understand how parasitic process, such as faradaic reactions, affect ion removals. In this study, we quantified the removals of Na⁺ and Cl^- as a function of electrode orientation in flow-through CDI. When the cathode was positioned upstream, Na⁺ and Cl^- removals approached a 1:1 symmetry, but when the anode was located upstream, we observed a significant drop in Na⁺, but not Cl^-, removals. We attributed this drop to oxygen reduction reactions at the cathode that competed with Na⁺ adsorption. Oxidation of carbon in the upstream anode yielded H⁺ that enhanced the reduction of oxygen to H₂O₂ at the downstream cathode, which in turn diverted electrons from Na⁺ adsorption. In the absence of oxygen, Na⁺ removals increased in the upstream anode orientation and were comparable to Cl^- removals, confirming that competition with oxygen reduction reactions was the primary reason for decreased Na⁺ removal. In the upstream cathode orientation, we show that H₂O₂ generated at the cathode can be oxidized at the downstream anode, possibly enhancing Na⁺ removals via internal electron recycling. Salt adsorption capacities calculated using actual ion removals did not always agree with those estimated using changes in solution conductivity, with the largest disagreement observed when conductivity data were corrected for pH changes. Our results highlight that faradaic reactions, particularly oxygen reduction reactions, can contribute to asymmetrical removals of monovalent ions in flow-through CDI.

Membrane-Free Hybrid Capacitive Deionization System Based on Redox Reaction for High-Efficiency NaCl Removal

Capacitive deionization (CDI) is a promising technology for desalination due to its advantages of low driven energy and environmental friendliness. However, the ion removal capacity (IRC) of CDI is insufficient for practical application because such a capacity is limited by the available surface area of the carbon electrode for ion absorption. Thus, the development of a novel desalination technology with high IRC and low cost is vital. Here, a membrane-free hybrid capacitive deionization system (HCDI) with hollow carbon@MnO₂ (HC@MnO₂) to capture sodium via redox reaction and hollow carbon sphere with net positive surface charges (PHC) for chloride adsorption is introduced. The as-obtained HC@MnO₂ with unique structure and high conductivity can improve the utilization of MnO₂ pseudocapacitive electrodes. Meanwhile, the PHC can selectively adsorb Cl^- and prevent the adsorption of Na⁺ due to electrostatic repulsion. As expected, the membrane-free HCDI system demonstrates excellent desalination performance. The system's IRC and maximum removal rate are 30.7 mg g^-1 and 7.8 mg g^-1 min^-1, respectively. Moreover, the proposed system has a low cost because of the absence of expensive ion exchange membranes (IEM), which is suitable for practical application. The excellent performance of this HCDI makes it a promising desalination technology for future use.

Characterization of contact resistances in ceramic-coated vertically aligned carbon nanotube arrays

Despite the technological significance of carbon nanotube (CNT) arrays and metal-oxide coated CNTs for electronic and electrochemical devices such as supercapacitors, lithium-ion batteries, and solar-chemical cells, sub-optimal device performance often results due to large contact resistance between the CNTs and the metallic current collectors or between the CNTs and their ceramic coatings. While contact resistance measurements are regularly carried out on individually contacted CNTs, contact resistance measurements on vertically aligned (VA) CNT arrays are not routine. Here, we demonstrate that two-probe electrical current-voltage measurements and electrochemical impedance spectroscopy can be used to probe the end contact resistance and side contact resistances of coated and uncoated VACNT arrays in order to optimize material deposition and selection.

Various cell architectures of capacitive deionization: Recent advances and future trends

Substantial consumption and widespread contamination of the available freshwater resources necessitate a continuing search for sustainable, cost-effective and energy-efficient technologies for reclaiming this valuable life-sustaining liquid. With these key advantages, capacitive deionization (CDI) has emerged as a promising technology for the facile removal of ions or other charged species from aqueous solutions via capacitive effects or Faradaic interactions, and is currently being actively explored for water treatment with particular applications in water desalination and wastewater remediation. Over the past decade, the CDI research field has progressed enormously with a constant spring-up of various cell architectures assembled with either capacitive electrodes or battery electrodes, specifically including flow-by CDI, membrane CDI, flow-through CDI, inverted CDI, flow-electrode CDI, hybrid CDI, desalination battery and cation intercalation desalination. This article presents a timely and comprehensive review on the recent advances of various CDI cell architectures, particularly the flow-by CDI and membrane CDI with their key research activities subdivided into materials, application, operational mode, cell design, Faradaic reactions and theoretical models. Moreover, we discuss the challenges remaining in the understanding and perfection of various CDI cell architectures and put forward the prospects and directions for CDI future development.