Rapid One-Pot Microwave Synthesis of Mixed-Linker Hybrid Zeolitic-Imidazolate Framework Membranes for Tunable Gas Separations

Metal-organic framework based self-powered devices for human body energy harvesting

The shift from traditional bulky electronics to smart wearable devices represents a crucial trend in technological advancement. In recent years, the focus has intensified on harnessing thermal and mechanical energy from human activities to power small wearable electronics. This vision has attracted considerable attention from researchers, with an emphasis on the development of suitable materials that can efficiently convert human body energy into usable electrical form. Metal-organic frameworks (MOFs), with their unique tunable structures, large surface areas, and high porosity, emerge as a promising material category for human body energy harvesting due to their ability to be precisely engineered at the molecular level, which allows for the optimization of their properties to suit specific energy harvesting needs. This article explores the progressive development of MOF materials, highlighting their potential in the realm of self-power devices for wearable applications. It first introduces the typical energy harvesting routes that are particularly suitable for harvesting human body energy, including thermoelectric, triboelectric, and piezoelectric techniques. Then, it delves into various research advances that have demonstrated the efficacy of MOFs in capturing and converting body-generated energy into electrical energy, emphasizing on the conceptual design, device fabrication, and applications in medical health monitoring, human-computer interaction, and motion monitoring. Furthermore, it discusses potential future directions for research in MOF-based self-powered devices and outlines perspectives that could drive breakthroughs in the efficiency and practicality of these devices.

A review on titanium oxide nanoparticles modified metal-organic frameworks for effective CO2 conversion and efficient wastewater remediation

Environmental pollution has been increasing since last decade due to increasing industrialisation and urbanisation. Various kinds ofenvironmental pollutants including carbon dioxide (CO2), dyes, pharmaceuticals, phenols, heavy metals along with many organic and inorganic species have been discovered in the various environmental compartments which possess harmful impacts tox human health, wildlife, and ecosystems. Thus, various efforts have been made through regulations, technological advancements, and public awareness campaigns to reduce the impact of the pollution. However, finding suitable alternatives to mitigate their impacts remained a challenge. Metal-organic frameworks (MOFs) are one of the advanced materials with unique features such as high porosity and stability which exhibit versatile applications in environmental remediation. Their composites with titanium oxide nanoparticles (TiO2) have been discovered to offer potential feature such as light harvesting capacity and catalytic activity. The composite integration and properties have been confirmed through characterization using surface area analysis, scanning electron/transmission electron microscopy, atomic force microscopy, fourier transformed infrared spectroscopy, X-ray diffraction analysis, X-ray photoelectron spectroscopy, thermogravimetric analysis, and others. Thus, this work rigorously discussed potential applications of the MOF@TiO2 nanomaterials for the CO2 capture and effective utilization in methanol, ethanol, acetone, acetaldehyde, and other useful products that served as fuel to various industrial processes. Additionally, the work highlights the effective performance of the materials towards photocatalytic degradation of both organic and inorganic pollutants with indepth mechanistic insights. The article will offer significant contribution for the development of sustainable and efficient technologies for the environmental monitoring and pollution mitigation.

Alginate di-aldehyde-modified metal-organic framework nanocarriers as delivery platform and adjuvant in inactivated pseudorabies vaccination

Pseudorabies virus (PRV) is a highly contagious viral disease, which leads to severe financial losses in the breeding industry worldwide. Presently, PRV is mainly controlled using live attenuated and inactivated vaccines. However, these vaccines have an innate tendency to lose their structural conformation upon exposure to environmental and chemical stressors and cannot provide full protection against the emerging prevalent PRV variants. In this work, first, we synthesized aminated ZIF-7/8 nanoparticles (NPs), and then chemical bond-coated alginate dialdehyde (ADA, a type of dioxide alginate saccharide) on their surface via Schiff base reaction to obtain ZIF-7/8-ADA NPs. The as-fabricated ZIF-7/8-ADA NPs exhibited high stability, monodispersity and a high loading ratio of antigen. Furthermore, the ZIF-7/8-ADA NPs showed good biocompatibility in vitro and in vivo. Using ZIF-7/8-ADA NPs as an adjuvant and inactivated PRV as a model antigen, we constructed a PR vaccine through a simple mixture. The immunity studies indicated that ZIF-7/8-ADA induced an enhancement in the Th1/Th2 immune response, which was superior to that of the commercial ISA201, alum adjuvant and ZIF-7/8. Due to the pH-sensitive release of the antigen in lysosomes, the as-prepared PR vaccine subsequently accelerated the antigen presentation and improved the immune responses in vitro and in vivo. The results of PRV challenge using mice as the model demonstrated that ZIF-7/8-ADA achieved the same preventive effect as the commercial ISA201 and was much better than the alum adjuvant, and thus can serve as a promising delivery system and adjuvant to enhance humoral and cellular responses against PRV infection.

MOF-Based Chemiresistive Gas Sensors: Toward New Functionalities

The sensing performances of gas sensors must be improved and diversified to enhance quality of life by ensuring health, safety, and convenience. Metal-organic frameworks (MOFs), which exhibit an extremely high surface area, abundant porosity, and unique surface chemistry, provide a promising framework for facilitating gas-sensor innovations. Enhanced understanding of conduction mechanisms of MOFs has facilitated their use as gas-sensing materials, and various types of MOFs have been developed by examining the compositional and morphological dependences and implementing catalyst incorporation and light activation. Owing to their inherent separation and absorption properties and catalytic activity, MOFs are applied as molecular sieves, absorptive filtering layers, and heterogeneous catalysts. In addition, oxide- or carbon-based sensing materials with complex structures or catalytic composites can be derived by the appropriate post-treatment of MOFs. This review discusses the effective techniques to design optimal MOFs, in terms of computational screening and synthesis methods. Moreover, the mechanisms through which the distinctive functionalities of MOFs as sensing materials, heterostructures, and derivatives can be incorporated in gas-sensor applications are presented.

Order-disorder engineering of RuO2 nanosheets towards pH-universal oxygen evolution

Ru-based electrocatalysts are considered promising anode catalysts towards water electrolysis due to their impressive activity under acidic conditions. Yet, caused by the collapse of the local crystalline domains and concurrent leaching of Ru species during the OER process, durability against structural degradation remains poor. Herein, we present an order-disorder structure optimization strategy, based on RuO2 nanosheets with well-defined amorphous-crystalline boundaries supported on carbon cloth (a/c-RuO2/CC), to effectively catalyze water oxidation, especially in the case of an acidic medium. Specifically, the as-prepared a/c-RuO2/CC sample has achieved a lower overpotential of 150 mV at 10 mA cm-2, a smaller Tafel slope of 47 mV dec-1, and a significantly higher durability with suppressed dissolution of Ru, with regard to its crystalline (c-RuO2/CC) and amorphous (a-RuO2/CC) counterparts. Computational simulations combined with experimental characterizations uncover that the construction of the structurally ordered-disordered boundary enables a weakened Ru-O covalency with regard to the ordered counterpart, which suppresses the leaching of active Ru species from the crystalline phase, thus enhances stability. An upshift of the d-band center in a/c-RuO2/CC relative to a-RuO2/CC reduces the energy barrier of the potential-determining step (*O → *OOH), thereby dramatically boosting activity.

Flexibility of Mixed Ligand Zeolitic Imidazolate Frameworks (ZIF-7-8) under CO2 Pressure: An Investigation Using Positron Annihilation Lifetime Spectroscopy

Fine tuning of the pore architecture and flexibility of zeolitic imidazolate frameworks (ZIFs) is highly crucial for realizing their applications in molecular gas separation. Mixed ligand frameworks (ZIF-7-8) synthesized by mixing 2-methylimidazole (2meIm) and benzimidazole (bIm) ligands show enhanced gas separation performance, attributable to pore and flexibility tuning. In the present study, positron annihilation lifetime spectroscopy (PALS) measurements under CO₂ pressure have been used to experimentally investigate the tuning of the pore architecture and flexibility of mixed ligand frameworks ZIF-7-8 having a ZIF-8 structure and similar morphology with varying bIm content up to 18.2%. The aperture and cavity of frameworks begin to open up with an increasing bIm ligand content followed by a decrease at a higher content. On the contrary, flexibility of the frameworks indexed from PALS measurements carried out under CO₂ pressure shows a decreasing trend followed by an increase. The present study shows that mixed ligand frameworks having a larger aperture size are less flexible as a result of inherent open configurations of ligands in the framework lattice. On the other hand, frameworks having a comparatively smaller aperture size show higher flexibility as a result of a possibility of twisting of the ligands under CO₂ pressure, resulting in aperture opening. The pore-opening phenomenon as a result of lattice flexibility under CO₂ pressure is observed to be fully reversible for ZIF-7-8.

Hybrid Benzimidazole-Dichloroimidazole Zeolitic Imidazolate Frameworks Based on ZIF-7 and Their Application in Mixed Matrix Membranes for CO2/N2 Separation

Mixed-linker zeolitic imidazolate frameworks (ZIFs) with the sodalite (sod) topology type and based on ZIF-7 have been prepared by direct synthesis from the mixtures of benzimidazole (BzIm) and 4,5-dichloroimidazole (dcIm). Incorporation of dcIm into the ZIF-7 structure gives ZIF-7/COK-17 hybrids with rhombohedral symmetry that do not show the "open-to-closed form" structural transition upon solvent removal exhibited by ZIF-7. They show Type I isotherms for low molecular weight gases and high affinity for CO₂ even at low partial pressures. Synthesis under mild conditions gives ZIF nanoparticles (250-400 nm) suitable for incorporation into mixed matrix membranes (MMMs): these were prepared with both glassy (Matrimid) and rubbery (PEBAX 1657) polymers. Permeation tests at 298 K and 1.2 bar reveal that the incorporation of Zn(BzIm_0.55dcIm_0.45)₂ nanoparticles at up to ca. 12 wt % gives defect-free membranes with enhanced CO₂ permeability in both polymer matrices, with retention of selectivity (Matrimid) or with an enhancement in selectivity that is most pronounced for the smaller nanoparticles (PEBAX). The membrane with the best performance exhibits a selectivity of ca. 200 for CO₂/N₂ (a 4-fold increase compared to the pure polymer) and a CO₂ permeability of 64 Barrer. At the relatively low loadings investigated, the MMMs' performance obeys the Maxwell model, and the intrinsic property of diffusivity of the ZIFs can be extracted as a result.

Applications of nanocomposites based on zeolitic imidazolate framework-8 in photodynamic and synergistic anti-tumor therapy

Due to the limitations resulting from hypoxia and the self-aggregation of photosensitizers, photodynamic therapy (PDT) has not been applied clinically to treat most types of solid tumors. Zeolitic imidazolate framework-8 (ZIF-8) is a common metal-organic framework that has ultra-high porosity, an adjustable structure, good biocompatibility, and pH-induced biodegradability. In this review, we summarize the applications of ZIF-8 and its derivatives in PDT. This review is divided into two parts. In the first part, we summarize progress in the application of ZIF-8 to enhance PDT and realize theranostics. We discuss the use of ZIF-8 to avoid the self-aggregation of photosensitizers, alleviate hypoxia, increase the PDT penetration depth, and combine PDT with multi-modal imaging. In the second part, we summarize how ZIF-8 can achieve synergistic PDT with other anti-tumor therapies, including chemotherapy, photothermal therapy, chemodynamic therapy, starvation therapy, protein therapy, gene therapy, and immunotherapy. Finally, we highlight the challenges that must be overcome for ZIF-8 to be widely applied in PDT. To the best of our knowledge, this is the first review of ZIF-8-based nanoplatforms for PDT.

Delayed Linker Addition (DLA) Synthesis for Hybrid SOD ZIFs with Unsubstituted Imidazolate Linkers for Propylene/Propane and n-Butane/i-Butane Separations

We present a novel synthesis strategy termed delayed linker addition (DLA) to synthesize hybrid zeolitic-imidazolate frameworks containing unsubstituted imidazolate linkers (Im) with SOD topology (hereafter termed Im/ZIF-8). Im linker incorporation can create larger voids and apertures, which are important properties for gas storage and separation. To date, there have been only a handful of reports of Im linkers incorporated into ZIF-8 frameworks, typically requiring arduous and complicated post synthesis approaches. DLA, as reported here, is a simple one-step synthesis strategy allowing high incorporation of Im linker into the ZIF-8 framework while still retaining its SOD topology. We fabricated mixed-matrix membranes (MMMs) with 6FDA-DAM polymer and Im/ZIF-8 obtained via DLA as a filler. The Im/ZIF-8-containing MMMs showed excellent performance for both propylene/propane and n-butane/i-butane separation, displaying permeability and ideal selectivity well above the polymer upper bound. Moreover, highly detailed molecular simulations shed light to the aperture size and flexibility response of Im/ZIF-8 and its improved diffusivity as compared to ZIF-8.

Antibacterial application and toxicity of metal-organic frameworks

Metal-organic frameworks (MOFs), which are also referred to as coordination polymers, have been widely used in adsorption separation and catalysis, especially in the field of physical chemistry in the past few years, because of their unique physical structure and potential chemical properties. In recent years, particularly with the continuous expansion of the research field, deepening of research levels, and sustained advancements in science and technology, powerful and diverse MOFs that have demonstrated great biomedical application potential have been successively developed. Consequently, this study summarizes the origin, development, and common synthesis methods of MOFs, with major emphasis on their antibacterial application and safety evaluation in biomedicine.

Microporous framework membranes for precise molecule/ion separations

Microporous framework membranes such as metal-organic framework (MOF) membranes and covalent organic framework (COF) membranes are constructed by the controlled growth of small building blocks with large porosity and permanent well-defined micropore structures, which can overcome the ubiquitous tradeoff between membrane permeability and selectivity; they hold great promise for the enormous challenging separations in energy and environment fields. Therefore, microporous framework membranes are endowed with great expectations as next-generation membranes, and have evolved into a booming research field. Numerous novel membrane materials, versatile manipulation strategies of membrane structures, and fascinating applications have erupted in the last five years. First, this review summarizes and categorizes the microporous framework membranes with pore sizes lower than 2 nm based on their chemistry: inorganic microporous framework membranes, organic-inorganic microporous framework membranes, and organic microporous framework membranes, where the chemistry, fabrications, and differences among these membranes have been highlighted. Special attention is paid to the membrane structures and their corresponding modifications, including pore architecture, intercrystalline grain boundary, as well as their diverse control strategies. Then, the separation mechanisms of membranes are covered, such as diffusion-selectivity separation, adsorption-selectivity separation, and synergetic adsorption-diffusion-selectivity separation. Meanwhile, intricate membrane design to realize synergistic separation and some emerging mechanisms are highlighted. Finally, the applications of microporous framework membranes for precise gas separation, liquid molecule separation, and ion sieving are summarized. The remaining challenges and future perspectives in this field are discussed. This timely review may provide genuine guidance on the manipulation of membrane structures and inspire creative designs of novel membranes, promoting the sustainable development and steadily increasing prosperity of this field.

MOF-Based Membranes for Gas Separations

Metal-organic frameworks (MOFs) represent the largest known class of porous crystalline materials ever synthesized. Their narrow pore windows and nearly unlimited structural and chemical features have made these materials of significant interest for membrane-based gas separations. In this comprehensive review, we discuss opportunities and challenges related to the formation of pure MOF films and mixed-matrix membranes (MMMs). Common and emerging separation applications are identified, and membrane transport theory for MOFs is described and contextualized relative to the governing principles that describe transport in polymers. Additionally, cross-cutting research opportunities using advanced metrologies and computational techniques are reviewed. To quantify membrane performance, we introduce a simple membrane performance score that has been tabulated for all of the literature data compiled in this review. These data are reported on upper bound plots, revealing classes of MOF materials that consistently demonstrate promising separation performance. Recommendations are provided with the intent of identifying the most promising materials and directions for the field in terms of fundamental science and eventual deployment of MOF materials for commercial membrane-based gas separations.

Methane Utilization to Methanol by a Hybrid Zeolite@Metal-Organic Framework

The development of an effective approach for methane utilization, especially methane conversion to methanol, is a crucial challenge that has remained unsolved satisfactorily. Herein, we propose an alternative concept of methane utilization to methanol over Fe-ZSM-5@ZIF-8. The concept is to use the designed composite as a dual catalyst in which ZIF-8 and Fe-ZSM-5 act simultaneously as a gas adsorbent and catalyst, respectively. In this case, methane can be adsorbed on ZIF-8 at 50 °C and subsequently converted to methanol at a moderate temperature (150 °C) on Fe-ZSM-5. Interestingly, the promising catalytic performance is observed on Fe-ZSM-5@ZIF-8, whereas only trace amounts of produced methanol are detected on isolated Fe-ZSM-5 and ZIF-8. Moreover, the designed composite also facilitates a facile methanol desorption at the hydrophobic surface of the composite. This first example opens up new promising horizons in combined perspectives for gas storage and catalytic process applications.

Defining New Limits in Gas Separations Using Modified ZIF Systems

Zeolitic-imidazolate frameworks (ZIFs) are candidate materials for the next generation of membranes for cheaper, "greener" separations. More than a decade after ZIF introduction, the high propylene/propane selectivity of ZIF-8 and ZIF-67 is the only example of ZIF membranes with remarkable selectivity efficiency despite their numerous advantages over other families of materials. Herein, we demonstrate the effectiveness of molecular-scale modification in the design of new ZIF materials useful for the separation of important and highly challenging mixtures such as He/CH₄, H₂/CH₄, O₂/N₂, CO₂/CH₄, and CO₂/N₂. Via computational methods, metal and linker substitutions are employed to produce new ZIF-8 variants with a finely discretized range of aperture sizes, as these govern the kinetic-based selectivity of the material. The permeability and selectivity through the ZIF-8 variants of the gases under study are estimated, and their performance is compared with an extensive number of polymeric, metal-organic framework, covalent-organic framework, and mixed-matrix membranes. The comparison shows that some of the ZIF-8 analogues can be used as membranes of unprecedented high separation performance. The scope of this work is to highlight the effectiveness of the molecular level design as means of membrane development to address the global need for cheaper separation methods and CO₂ emission reduction.

Postsynthetic Modification of ZIF-8 Membranes via Membrane Surface Ligand Exchange for Light Hydrocarbon Gas Separation Enhancement

The ability to tailor the pore structure of metal-organic framework (MOF) membranes enables synthesis of new or modified MOF membranes with enhanced separation characteristics. This work employs a modified version of solvent-assisted ligand exchange, termed membrane surface ligand exchange (MSLE), to modify the pore structure of zeolitic imidazolate framework-8 (ZIF-8) membranes. This paper is the first to perform a time-based, ex situ characterization and gas permeation study of ZIF-8 MSLE with 5,6-DBIM (DBIM, dimethylbenzimidazole) to effectively narrow the ZIF-8 pores, enhance light hydrocarbon gas-phase separations, and give insight into the exchange mechanism with respect to time and temperature. The results show that relatively fast exchange kinetics occur mainly at the outer surface of the ZIF-8 membrane during the initial 30 min of exchange and enables significant (40-70%) increases in propylene/propane selectivity with minimal (10-20%) propylene permeance losses for the modified ZIF-8 membranes. We postulate as the reaction time proceeds, the ligand-exchange rate slows as the DBIM linker diffuses into the ZIF-8 membrane beyond the external surface, exchanges with the original linker, disrupts the original framework's crystallinity, and then increases long-range order/crystallinity as the reaction proceeds. The H₂/C₂ separation factor increases with increased 5,6-DBIM content in the ZIF-8 framework which is facilitated by increased MSLE time and reaction temperature.

Defect Creation in Surface-Mounted Metal-Organic Framework Thin Films

Defect engineering is a strategy for tailoring the properties of metal-organic frameworks (MOFs). Plenty of efforts have been devoted to study the defect chemistry and structures of bulk MOFs; however, the reported example of a defect-engineered surface-mounted MOF (SURMOF) thin film is rare. In this work, defects were incorporated in SURMOF thin films by using defect-generating linkers and taking advantage of the liquid-phase stepwise epitaxial layer-by-layer growth (LBL). Two methods based on the LBL, named mixing method and alternating method, are proposed for incorporating defects in the prototypical SURMOF HKUST-1 by partially substituting the parent H₃btc (benzene-1,3,5-tricarboxylic acid) linker with a set of defect-generating linkers H₂ip (isophthalic acid), H₂OH-ip (5-hydroxyisophthalic acid), and H₂pydc (3,5-pyridinedicarboxylic acid). The crystallinity and phase purity of the obtained "defected" SURMOFs were confirmed by X-ray diffraction, infrared reflection absorption spectroscopy, and Raman spectroscopy. The incorporation of the defect-generating linkers and the types of induced defects were characterized by ultraviolet-visible spectroscopy, time-of-flight secondary ion mass spectrometry, methanol adsorption, scanning electron microscopy, and ¹H nuclear magnetic resonance spectroscopy (after digestion of the samples). These two methods provide avenues for controlling the defect formation in MOF thin films.

Self-diffusion of pure and mixed gases in mixed-linker zeolitic imidazolate framework-7-8 by high field diffusion NMR

Self-diffusion of pure gases including carbon dioxide, methane, ethylene, ethane, and xenon as well as selected two-component mixtures was studied in hybrid zeolitic imidazolate framework-7-8 (ZIF-7-8) crystals using pulsed field gradient (PFG) NMR. This material was formed by mixing 2-methylimidazolate (ZIF-8 linker) and bulkier benzimidazolate (ZIF-7 linker) in the same framework. The intracrystalline diffusion data measured in mixed-linker ZIF-7-8 was compared with the corresponding data in the parent ZIF-8 material. It was found that under the same or comparable experimental conditions the intracrystalline gas diffusion was always slower in ZIF-7-8 than in ZIF-8. This observation is consistent with the expected lower pore aperture size in ZIF-7-8 than in ZIF-8. At the same time, the ethane/ethylene diffusion selectivity was found to be similar in both ZIFs. It was also observed that for the pure studied gases larger than carbon dioxide the diffusivity ratios in ZIF-8 and ZIF-7-8 do not increase with increasing gas size at all loading pressures used. All these data are attributed to greater framework flexibility effects in ZIF-7-8 than ZIF-8. Such effects manifest themselves in a distortion and/or increase in the aperture size in the presence of large sorbates due to linker flexibility.

Rapid in situ microwave synthesis of Fe3O4@MIL-100(Fe) for aqueous diclofenac sodium removal through integrated adsorption and photodegradation

Metal-Organic Frameworks (MOFs) are efficient adsorbent and catalyst, however, the prepare of MOFs can be extremely time consuming. The rapid in situ microwave synthesis process offers the possibility of MOFs to a large-scale application. In this study, Fe₃O₄@MIL-100(Fe) was rapidly prepared via microwave in 30 min using Fe₃O₄ as metal precursor and applied as the adsorbent and photocatalyst to remove diclofenac sodium (DCF) from water. Fe₃O₄@MIL-100(Fe) exhibited an excellent adsorption effect to DCF with the maximum adsorption capacities of 400 mg/L. The presence of H₂O₂ could promote the removal of DCF during photocatalytic process. Approximately 99.4% of the DCF was removed in Fe₃O₄@MIL-100(Fe)/vis/H₂O₂ system via adsorption removal and consequent photocatalytic degradation. The high efficiency was attributed to the large BET surface area (1244.62 m²/g) and abundant iron metal sites (Fe(III) and Fe(II)) of Fe₃O₄@MIL-100(Fe). The adsorptive, photocatalytic property of Fe₃O₄@MIL-100(Fe) and the Fenton-like reaction were the main mechanisms for DCF removal. TOC analyzer was served to assess the mineralization of solutions treated by Fe₃O₄@MIL-100(Fe)/vis/H₂O₂ in 12 h. High elimination of TOC (87.8%) was observed during the DCF mineralization process. In addition, the major products were illuminated using HPLC-Q-TOF-MS and DCF degradation pathways were also proposed.

Linker-Doped Zeolitic Imidazolate Frameworks (ZIFs) and Their Ultrathin Membranes for Tunable Gas Separations

Zeolitic imidazolate frameworks (ZIFs) have gained much interest due to their potentials in gas separations. A hybrid approach by mixing metals and/or linkers has been recently investigated to fine-tune the ZIF framework porosity and surface properties and potentially extending their separation applications for many important gas mixtures. In general, the hybrid approach requires mixing of isostructural ZIFs to maintain their topology, thus limiting the options of linkers and metal centers to obtain hybrid ZIFs. Linker-doping, as reported here, can be a strategy to expand the option of imidazolate linkers to obtain mixed-linker hybrid ZIFs. Two linkers are investigated to be doped into the ZIF-8 framework: 2-ethylimidazole (eIm) and 2-phenylimidazole (phIm). The linker-doping strategy is shown to tune the "stiffness" of Zn-N bonding as characterized by FT-IR, thereby the linker flip-flopping motion of ZIF-8, which is analyzed through gas adsorption isotherms. Furthermore, well-intergrown ultrathin eIm-doped ZIF-8 membranes are grown on α-Al₂O₃ substrates, in which the incorporation of eIm affects the morphology and thickness of the polycrystalline membranes, improving the permeance of propylene and propane molecules.

Structural Transformations in the Thermal Dehydration of [Cu2(bpa)(btec)(H2O)4]n Coordination Polymer

Reactions between pyridinic ligands such as 1,2-bis(4-pyridyl)ethane (bpa) and transition metal cations are a very widespread technique to produce extended coordination polymers such as Metal-Organic Frameworks. In combination with a second ligand these systems could present different topologies and behaviors. In this context, the use of 1,2,4,5-benzenetetracarboxylic acid (H₄btec) gave us a novel 2D compound, [Cu₂(bpa)(btec)(H₂O)₄]_n (1), which was prepared by microwave-assisted synthesis and structurally characterized by means of single crystal X-ray diffraction. Its thermal behavior was analyzed through thermogravimetric analysis and variable temperature powder X-ray diffraction, concluding that thermal stability is influenced by the coordination water molecules, allowing two sequential thermochromic phase transformations to take place. These transformations were monitored by electronic paramagnetic resonance spectroscopy and magnetic susceptibility measurements. In addition, the crystal structure of the anhydrous compound [Cu₂(bpa)(btec)]_n (1.ah) was determined. Finally, a topological study was carried out for the bpa ligand considering all the structures deposited in the Cambridge Structural Databased. More than 1000 structures were analyzed and classified into 17 different topologies, according to the role of the ligand.

Zeolite Imidazolate Framework Membranes on Polymeric Substrates Modified with Poly(vinyl alcohol) and Alginate Composite Hydrogels

Poly(vinyl alcohol)-sodium alginate composite hydrogels were first introduced to synthesize robust and well-intergrown zeolite imidazolate framework (ZIF)/polymer hollow fiber membranes. Through enough adsorption interaction with metal ions by chelation, sufficient nucleation sites for in situ metal-organic framework (MOF) preparation are provided. Using this method, we can not only easily prepare defect-free MOF membranes ignoring the complex modification process and seed deposition but also structurally fix crystalline MOF layers and greatly improve the stiffness and durability of MOF composite membranes. The strategy also gives the appropriate level of generality for synthesis of versatile dense MOF membranes on a variety of polymeric supports. The fabricated ZIF-8/polyethersulfone membrane presented remarkable gas separation performance with H₂ permeance of as high as 9.66 × 10^-7 mol m^-2 s^-1 Pa^-1 and a high H₂/CO₂ separation factor of up to 29.0.

Ultrathin metal/covalent-organic framework membranes towards ultimate separation

Metal/covalent-organic framework (MOF/COF) membranes have attracted increasing research interest and have been considered as state-of-the-art platforms applied in various environment- and energy-related separation/transportation processes. To break the trade-off between permeability and selectivity to achieve ultimate separation, recent studies have been oriented towards how to design and exploit ultrathin MOF/COF membranes (i.e. sub-1 μm-thick). Given great advances made in the past five years, it is valuable to timely and systematically summarize the recent development and shed light on the future trend in this multidisciplinary field. In this review, we first present the advanced strategies in fabricating ultrathin defect-free MOF/COF membranes such as in situ growth, contra-diffusion method, layer-by-layer (LBL) assembly, metal-based precursor as the pre-functionalized layer, interface-assisted strategy, and laminated assembly of MOF/COF nanosheets. Then, the recent progress in some emerging applications of ultrathin MOF/COF membranes beyond gas separation is highlighted, including water treatment and seawater desalination, organic solvent nanofiltration, and energy-related separation/transportation (i.e. lithium ion separation and proton conductivity). Finally, some unsolved scientific and technical challenges associated with future perspectives in this field are discussed, inspiring the development of next-generation separation membranes.

Nano-gate opening pressures for the adsorption of isobutane, n-butane, propane, and propylene gases on bimetallic Co–Zn based zeolitic imidazolate frameworks

In this article, zeolitic-imidazolate framework-8 (ZIF-8) and its mixed metal CoZn-ZIF-8 were synthesized via a rapid microwave method. They exhibited a nanogate opening pressure threshold for the adsorption of C₃ and C₄ compounds.

Three layer-structured cadmium coordination polymers based on flexible 5-(4-pyridyl)-methoxylisophthalic acid: rapid synthesis and luminescence sensing

Three layered Cd-CPs, synthesized by a MW-assisted solvothermal method within two or three minutes, serve as fluorescent sensors for Fe³⁺ ions.

Etching gas-sieving nanopores in single-layer graphene with an angstrom precision for high-performance gas mixture separation

One of the bottlenecks in realizing the potential of atom-thick graphene membrane for gas sieving is the difficulty in incorporating nanopores in an otherwise impermeable graphene lattice, with an angstrom precision at a high-enough pore density. We realize this design by developing a synergistic, partially decoupled defect nucleation and pore expansion strategy using O₂ plasma and O₃ treatment. A high density (ca. 2.1 × 10¹² cm^-2) of H₂-sieving pores was achieved while limiting the percentage of CH₄-permeating pores to 13 to 22 parts per million. As a result, a record-high gas mixture separation performance was achieved (H₂ permeance, 1340 to 6045 gas permeation units; H₂/CH₄ separation factor, 15.6 to 25.1; H₂/C₃H₈ separation factor, 38.0 to 57.8). This highly scalable pore etching strategy will accelerate the development of single-layer graphene-based energy-efficient membranes.

Zeolitic Imidazolate Framework Membranes for Light Olefin/Paraffin Separation

Propylene/propane and ethylene/ethane separations are performed by energy-intensive distillation processes, and membrane separation may provide substantial energy and capital cost savings. Zeolitic imidazolate frameworks (ZIFs) have emerged as promising membrane materials for olefin/paraffin separation due to their tunable pore size and chemistry property, and excellent chemical and thermal stability. In this review, we summarize the recent advances on ZIF membranes for propylene/propane and ethylene/ethane separations. Membrane fabrication methods such as in situ crystallization, seeded growth, counter-diffusion synthesis, interfacial microfluidic processing, vapor-phase and current-driven synthesis are presented. The gas permeation and separation characteristics and membrane stability are also discussed.

Ultra-Tuning of the Aperture Size in Stiffened ZIF-8_Cm Frameworks with Mixed-Linker Strategy for Enhanced CO2 /CH4 Separation

ZIF-8 membrane has the potential for CO₂ /CH₄ separation based on size exclusion. But if traditionally prepared by solvothermal methods, it shows only negligible selectivity due to the linker mobility. Here, ≈500 nm-thin hybrid ZIF-7_x -8 membranes with suppressed linker mobility and narrowed window aperture are prepared by a fast current-driven synthesis (FCDS) within 20 min. The in situ electric field during FCDS allows the formation of stiffened ZIF-8_Cm as parent skeleton and the mixed-linker strategy is applied to narrow the aperture size simultaneously. The ZIF-7₂₂ -8 membrane shows significantly sharpened molecular sieving for CO₂ /CH₄ with a separation factor above 25, which soared tenfold compared with other unmodified ZIF-8 membranes. Additionally, the membrane shows exceptional separation performance for H₂ /CH₄ and CO₂ /N₂ , with separation factors of 71 and 20, respectively. After 180 h temperature swing operation, it still maintains the excellent separation performance.