pH-Controlled Drug Release by Diffusion through Silica Nanochannel Membranes

Super-assembled periodic mesoporous organosilica membranes with hierarchical channels for efficient glutathione sensing

Bioinspired nanochannel-based sensors have elicited significant interest because of their excellent sensing performance, and robust mechanical and tunable chemical properties. However, the existing designs face limitations due to material constraints, which hamper broader application possibilities. Herein, a heteromembrane system composed of a periodic mesoporous organosilica (PMO) layer with three-dimensional (3D) network nanochannels is constructed for glutathione (GSH) detection. The unique hierarchical pore architecture provides a large surface area, abundant reaction sites and plentiful interconnected pathways for rapid ionic transport, contributing to efficient and sensitive detection. Moreover, the thioether groups in nanochannels can be selectively cleaved by GSH to generate hydrophilic thiol groups. Benefiting from the increased hydrophilic surface, the proposed sensor achieves efficient GSH detection with a detection limit of 1.2 μM by monitoring the transmembrane ionic current and shows good recovery ranges in fetal bovine serum sample detection. This work paves an avenue for designing and fabricating nanofluidic sensing systems for practical and biosensing applications.

Design of optimized photonic-structure and analysis of adding a SiO2 layer on the parallel CH3NH3PbI3/CH3NH3SnI3 perovskite solar cells

So far, remarkable achievements have been obtained by optimizing the device architecture and modeling of solar cells is a precious and very effective way to comprehend a better description of the physical mechanisms in solar cells. As a result, this study has inspected two-dimensional simulation of perovskite solar cells (PSCs) to achieve a precise model. The solution which has been employed is based on the finite element method (FEM). First, the periodically light trapping (LT) structure has been replaced with a planar structure. Due to that, the power conversion efficiency (PCE) of PSC was obtained at 14.85%. Then, the effect of adding an SiO2 layer to the LT structure as an anti-reflector layer was investigated. Moreover, increasing the PCE of these types of solar cells, a new structure including a layer of CH3NH3SnI3 as an absorber layer was added to the structure of PSCs in this study, which resulted in 25.63 mA/cm2 short circuit current (Jsc), 0.96 V open circuit voltage (Voc), and 20.48% PCE.

Nanostructures for prevention, diagnosis, and treatment of viral respiratory infections: from influenza virus to SARS-CoV-2 variants

Viruses are a major cause of mortality and socio-economic downfall despite the plethora of biopharmaceuticals designed for their eradication. Conventional antiviral therapies are often ineffective. Live-attenuated vaccines can pose a safety risk due to the possibility of pathogen reversion, whereas inactivated viral vaccines and subunit vaccines do not generate robust and sustained immune responses. Recent studies have demonstrated the potential of strategies that combine nanotechnology concepts with the diagnosis, prevention, and treatment of viral infectious diseases. The present review provides a comprehensive introduction to the different strains of viruses involved in respiratory diseases and presents an overview of recent advances in the diagnosis and treatment of viral infections based on nanotechnology concepts and applications. Discussions in diagnostic/therapeutic nanotechnology-based approaches will be focused on H1N1 influenza, respiratory syncytial virus, human parainfluenza virus type 3 infections, as well as COVID-19 infections caused by the SARS-CoV-2 virus Delta variant and new emerging Omicron variant.

Molecular Complementarity of Proteomimetic Materials for Target-Specific Recognition and Recognition-Mediated Complex Functions

As biomolecules essential for sustaining life, proteins are generated from long chains of 20 different α-amino acids that are folded into unique 3D structures. In particular, many proteins have molecular recognition functions owing to their binding pockets, which have complementary shapes, charges, and polarities for specific targets, making these biopolymers unique and highly valuable for biomedical and biocatalytic applications. Based on the understanding of protein structures and microenvironments, molecular complementarity can be exhibited by synthesizable and modifiable materials. This has prompted researchers to explore the proteomimetic potentials of a diverse range of materials, including biologically available peptides and oligonucleotides, synthetic supramolecules, inorganic molecules, and related coordination networks. To fully resemble a protein, proteomimetic materials perform the molecular recognition to mediate complex molecular functions, such as allosteric regulation, signal transduction, enzymatic reactions, and stimuli-responsive motions; this can also expand the landscape of their potential bio-applications. This review focuses on the recognitive aspects of proteomimetic designs derived for individual materials and their conformations. Recent progress provides insights to help guide the development of advanced protein mimicry with material heterogeneity, design modularity, and tailored functionality. The perspectives and challenges of current proteomimetic designs and tools are also discussed in relation to future applications.

Scaling laws for single-file diffusion of adhesive particles

Single-file diffusion refers to the Brownian motion in narrow channels where particles cannot pass each other. In such processes, the diffusion of a tagged particle is typically normal at short times and becomes subdiffusive at long times. For hard-sphere interparticle interaction, the time-dependent mean squared displacement of a tracer is well understood. Here we develop a scaling theory for adhesive particles. It provides a full description of the time-dependent diffusive behavior with a scaling function that depends on an effective strength of adhesive interaction. Particle clustering induced by the adhesive interaction slows down the diffusion at short times, while it enhances subdiffusion at long times. The enhancement effect can be quantified in measurements irrespective of how tagged particles are injected into the system. Combined effects of pore structure and particle adhesiveness should speed up translocation of molecules through narrow pores.

Super-assembled mesoporous thin films with asymmetric nanofluidic channels for sensitive and reversible electrical sensing

Bioinspired artificial nanochannels have emerged as promising candidates for developing smart nanofluidic sensors due to their highly controllable size and surface functionality. However, little attention has been paid to the role of the outer surface of the nanochannels in enhancing the detection sensitivity. Herein, an asymmetric nanochannel-based responsive detection platform with ultrathin tannic acid modified mesoporous silica (TA-MS) layer and alumina oxide (AAO) thin film is prepared through super-assembly strategy. The functional TA-MS outer surface layer provides abundant phenolic groups on the nanochannels for ions and molecules transport, which paves the way for the development of heterochannels for label-free, reversible and highly sensitive dopamine (DA) detection based off of cation displacement effect. Notably, by engineering optimal thickness of the TA-MS, the sensing performance can be further improved. After optimization, the linear response ranges for DA detection are 0.001-1 μM, 1-10 μM and 10-200 μM with the detection limit of 0.1 nM. The prepared sensor exhibits stable reversibility after several detection cycles. In addition, this method was successfully applied for DA detection in fetal bovine serum sample. Theoretical calculations further prove the detection mechanism. This work opens a new horizon of using mesoporous materials to construct nanofluidic sensors for ultrasensitive small molecule detection and recognition.

Fabrication of Redox-Controllable Bioinspired Nanochannels for Precisely Regulating Protein Transport

Redox regulation is an inherent feature of nature and plays a crucial role in the transport of ions/small molecules. However, whether redox status affects the biomolecule transport remains largely unknown. To explore the effects of redox status on biomolecule transport, herein, we constructed a glutathione/glutathione disulfide (GSH/GSSG)-driven and pillar[5]arene (P5)-modified artificial nanochannel for protein transport. The results indicate that hemoglobin (Hb) protein is selectively and effectively transported across the GSH-driven P5-modified nanochannel, which suggests that the redox status of the nanochannel could affect the process of protein transport. Therefore, this redox-driven nanochannel could provide a potential application for biomolecule detection and redox-controllable biomolecular drug release.

Bioinspired photo-responsive membrane enhanced with "light-cleaning" feature for controlled molecule release

Inspired by the stomatal feature of plant leaves, a photo-responsive membrane was developed to enhance the removal of irreversible membrane fouling and to control molecule release. Photo-responsive polymers were prepared by reacting the amine group of 4-amineazobenzene with about 3, 5 and 9 out of 12 carboxylic groups of PMAA which was grafted from P(VDF-CTFE) with a certain length. Subsequently, high-flux photo-responsive membranes (PRMs) were prepared from the heterogeneous polymers with different contents of photo-switchable azobenzene following a non-solvent-induced phase-inversion protocol. The pore size and surface hydrophilicity of PRMs could be reversibly increased by switching visible light to UV irradiation, which dramatically enhanced the backflushing efficiency on PRMs under UV irradiation. The "light-cleaning" process could recover more than 90% of the irreversible flux decline caused by typical organic foulant (BSA) and biological foulant (E. coli) on PRMs. The higher the content of azobenzene, the more obvious the pore size and hydrophilicity variation after light switching but the smaller the absolute pore size observed for PRMs. On the other hand, the light-switching gates of PRMs enabled the controlled release of molecules with different sizes. The novel PRM provided an efficient solution to mitigate irreversible membrane fouling and a light-triggered molecule release protocol, which would improve the membrane performance and further expand the application field of the membrane.

Recent advances in polymeric nanostructured ion selective membranes for biomedical applications

Nano structured ion-selective membranes (ISMs) are very attractive materials for a wide range of sensing and ion separation applications. The present review focuses on the design principles of various ISMs; nanostructured and ionophore/ion acceptor doped ISMs, and their use in biomedical engineering. Applications of ISMs in the biomedical field have been well-known for more than half a century in potentiometric analysis of biological fluids and pharmaceutical products. However, the emergence of nanotechnology and sophisticated sensing methods assisted in miniaturising ion-selective electrodes to needle-like sensors that can be designed in the form of implantable or wearable devices (smartwatch, tattoo, sweatband, fabric patch) for health monitoring. This article provides a critical review of recent advances in miniaturization, sensing and construction of new devices over last decade (2011-2021). The designing of tunable ISM with biomimetic artificial ion channels offered intensive opportunities and innovative clinical analysis applications, including precise biosensing, controlled drug delivery and early disease diagnosis. This paper will also address the future perspective on potential applications and challenges in the widespread use of ISM for clinical use. Finally, this review details some recommendations and future directions to improve the accuracy and robustness of ISMs for biomedical applications.

Amphiphilic and Biocompatible DNA Origami-Based Emulsion Formation and Nanopore Release for Anti-Melanogenesis Therapy

Programmable engineered DNA origami provides infinite possibilities for customizing nanostructures with controllable precision and configurable functionality. Here, a strategy for fabricating an amphiphilic triangular DNA origami with a central nanopore that integrates phase-stabilizing, porous-gated, and affinity-delivering effects is presented. By introducing the DNA origami as a single-component surfactant, the water-in-oil-in-water (W/O/W) emulsion is effectively stabilized with decreased interfacial tension. Microscopic observation validates the attachment of the DNA origami onto the water-in-oil and oil-in-water interfaces. Furthermore, fluorescence studies and molecular docking simulations indicate the binding interactions of DNA origami with arbutin and coumaric acid at docking sites within central nanopores. These central nanopores are functionalized as molecular gates and affinity-based scaffold for the zero-order release of arbutin and coumaric acid at a constant rate regardless of concentration gradient throughout the whole releasing period. In vivo zebrafish results illustrate the advantages of this zero-order release for anti-melanogenesis therapy over direct exposure or Fickian diffusion. The DNA origami-based W/O/W emulsion presents anti-melanogenic effects against UV-B exposure without cardiotoxicity or motor toxicity. These results demonstrate that this non-toxic amphiphilic triangular DNA origami is capable of solely stabilizing the W/O/W emulsion as well as serving as nanopore gates and affinity-based scaffold for constant release.

"Ion Pool" Structural Ion Storage Device: A New Strategy to Collect Ions by Nanoconfinement Effects

Ion storage structure widely exists in organisms, which is used to harvesting energy in environment and converting it into ion concentration gradient to maintain complex life activities. The construction of ion storage structures relies on isolating the biological body fluids by biofilm systems, which can also be regarded as local ions confinement. Mimicking this ions storage process, an "ion pool" structural ion storage device is proposed in this research by artificial ion nanochannels, which can transform the electric power into ion concentration gradient. It is consisted of micrometer-sized ions reservoir and nanosized ions filters. Ions can be isolated within the "pool" and performed ultrahigh ions enrichment or depletion behavior deviated from bulk. Through numerical simulation by Poisson-Nernst-Planck equations, "ion pool" structural device achieves nearly 20 000 rectification ratio with low surface charge. An "ion pool" structural ions storage device is also constructed with block copolymer and polyethylene terephthalate composite membranes, a super high rectification ratio of 3184.0 is achieved from the experiment, which is the highest reported so far. The ion storage efficiency of the device reaches 14.90%, which is an order of magnitude better than non-"ion pool" structural nanofluid devices.

pH-Responsive Ultrathin Nanoporous SiO2 Films for Selective Ion Permeation

Ultrathin nanoporous (NP) films are an emerging field for selective and effective ion/molecular separation and electrochemical sensing applications. We describe selective ion permeation in surface-functionalized ultrathin NP SiO₂ films (NP SiO₂-NH₂). The ultrathin NP SiO₂ films with ca. 8 nm thickness were prepared from silsesquioxane-containing blend polymer Langmuir-Blodgett films (nanosheets) using the photo-oxidation method. The porous SiO₂ surface was modified with a pH-responsive amine-containing silane coupling agent. Selective ion permeation was demonstrated under acidic pH conditions (pH ≤ 6) using two equally sized redox probes: negative (Fe(CN)₆^3-/4-) and positive (Ru(NH₃)₆^2+/3+) ions. The current density for Fe(CN)₆^3-/4- decreased as the pH value increased to pH = 6, whereas it increased for Ru(NH₃)₆^2+/3+. Control measurements revealed that the probes can penetrate the pores of nonfunctionalized SiO₂ films irrespective of pH values, indicating that both the size and the surface charge response contributed to selective ion permeation. Results obtained from this study pave the way for new applications in molecular separation and sensing applications based on ultrathin nanoporous films (<10 nm) and tailored surfaces.

Multimodal Mesoporous Silica Nanocarriers for Dual Stimuli-Responsive Drug Release and Excellent Photothermal Ablation of Cancer Cells

Background

Core-shell types of mesoporous silica nanoparticles (MSNs) with multimodal functionalities were developed for bio-imaging, controlled drug release associated with external pH, and near-infrared radiation (NIR) stimuli, and targeted and effective chemo-photothermal therapeutics.

Materials and Methods

We synthesized and developed a core-shell type of mesoporous silica nanocarriers for fluorescent imaging, stimuli-responsive drug release, magnetic separation, antibody targeting, and chemo-photothermal therapeutics. Also, the biocompatibility, cellular uptake, cytotoxicity, and photothermal therapy on these FS3-based nanocarriers were systematically investigated.

Results

Magnetic mesoporous silica nanoparticles was prepared by coating a Fe₃O₄ core with a mesoporous silica shell, followed by grafting with fluorescent conjugates, so-called FS3. The resulting FM3 was preloaded with therapeutic cisplatin and coated with polydopamine layer, so-called FS3P/C. Eventually, graphene oxide-wrapped FS3P/C (FS3P-G/C) exhibited high sensitivity in the dual stimuli (pH, NIR)-responsive controlled release behavior. On the other hand, Au NPs-coated FS3P/C (FS3P-A/C) exhibited more stable release behavior, irrespective of pH changes, and exhibited much more enhanced release rate under the same NIR irradiation. Notably, FS3P-A/C showed strong NIR absorption, enabling photothermal destruction of HeLa cells by its chemo-photothermal therapeutic effects under NIR irradiation (808 nm, 1.5 W/cm²). The selective uptake of FS3-based nanocarriers was confirmed in cancer cell lines including HeLa (American Type Culture Collection - ATCC) and SHSY5Y (ATCC 2266) by the images obtained from confocal laser scanning microscopy, flow cytometry, and transmission electron microscopy instruments. Cisplatin-free FS3-based nanocarriers revealed good cellular uptake and low cytotoxicity against cancerous HeLa and SH-SY5Y cells, but showed no obvious toxicity to normal HEK293 (ATCC 1573) cell.

Conclusion

Along with the facile synthesis of FS3-based nanocarriers, the integration of all these strategies into one single unit will be a prospective candidate for biomedical applications, especially in chemo-photothermal therapeutics, targeted delivery, and stimuli-responsive controlled drug release against multiple cancer cell types.

Intelligent Drug Delivery Microparticles with Visual Stimuli-Responsive Structural Color Changes

BACKGROUND

Particle-based drug delivery systems (DDSs) have a demonstrated value for drug discovery and development. However, some problems remain to be solved, such as limited stimuli, visual-monitoring.

AIM

To develop an intelligent multicolor DDSs with both near-infrared (NIR) controlled release and macroscopic color changes.

MATERIALS AND METHODS

Microparticles comprising GO/pNIPAM/PEGDA composite hydrogel inverse opal scaffolds, with dextran and calcium alginate hydrogel were synthesized using SCCBs as the template. The morphology of microparticle was observed under scanning electron microscopy, and FITC-dextran-derived green fluorescence images were determined using a confocal laser scanning microscope. During the drug release, FITC-dextran-derived green fluorescence images were captured using fluorescent inverted microscope. The relationship between the power of NIR and the drug release rate was obtained using the change in optical density (OD) values. Finally, the amount of drug released could be estimated quantitatively used the structural color or the reflection peak position.

RESULTS

A fixed concentration 8% (v/v) of PEGDA and 4mg/mL of GO was chosen as the optimal concentration based on the balance between appropriate volume shrinkage and structure color. The FITC-dextran was uniformly encapsulated in the particles by using 0.2 wt% sodium alginate. The microcarriers shrank because of the photothermal response and the intrinsic fluorescence intensity of FITC-dextran in the microparticles gradually decreased at the same time, indicating drug release. With an increasing duration of NIR irradiation, the microparticles gradually shrank, the reflection peak shifted toward blue and the structural color changed from red to orange, yellow, green, cyan, and blue successively. The drug release quantity can be predicted by the structural color of microparticles.

CONCLUSION

The multicolor microparticles have great potential in drug delivery systems because of its vivid reporting color, excellent photothermal effect, and the good stimuli responsivity.

DNA Release from a Modified Electrode Triggered by a Bioelectrocatalytic Process

DNA release from an electrode surface was stimulated by application of a mild electrical potential (0 V vs Ag/AgCl). The release process was activated by interfacial pH increase originating from H⁺ consumption during O₂ reduction bio-electrocatalyzed by bilirubin oxidase immobilized at the electrode surface. The pH increase resulted in a change of the electrical charge from positive to negative at the surface of SiO₂ nanoparticles (200 nm) associated with the electrode surface and functionalized with trigonelline and boronic acid. While the negatively charged DNA molecules were electrostatically bound to the positively charged surface, the negative charge produced upon O₂ reduction resulted in the DNA repulsion and release from the modified interface. The small electrical potential for O₂ reduction resulting in the interface recharge was allowed due to the bio-electrocatalysis using bilirubin oxidase enzyme. While, in the first set of experiments, the potential was applied on the modified electrode from an electrochemical instrument, later it was generated in situ by biocatalytic or photo-biocatalytic processes at a connected electrode. A multistep biocatalytic cascade generating NADH or photosynthetic process in thylakoid membranes was used to produce in situ a small potential to stimulate the DNA release catalyzed by bilirubin oxidase. The designed system can be used for different release processes triggered by various signals (electrical, biomolecular, and light signals, etc.), thus representing a general interfacial platform for the controlled release of different biomolecules and nanosize species.

Revealing the transient conformations of a single flavin adenine dinucleotide using an aerolysin nanopore

Flavin adenine dinucleotide (FAD) as a cofactor is involved in numerous important metabolic pathways where the biological function is intrinsically related to its transient conformations. The confined space of enzymes requires FAD set in its specific intermediate conformation. However, conventional methods only detect stable conformations of FAD molecules, while transient intermediates are hidden in ensemble measurements. There still exists a challenge to uncover the transient conformation of each FAD molecule, which hinders the understanding of the structure-activity relationship of the FAD mechanism. Here, we employ the electrochemically confined space of an aerolysin nanopore to directly characterize a series of transient conformations of every individual FAD. Based on distinguishable current blockages, the "stack", "open", and four quasi-stacked FADs are clearly determined in solution, which is further confirmed by temperature-dependent experiments and mutant aerolysin assay. Combined with molecular dynamics simulations, we achieved a direct correlation between the residual current ratio (I/I ₀) and FAD backbone angle. These results would facilitate further understanding of the structure-activity relationship in the flavoprotein.

Upper critical solution temperature polymer-grafted hollow mesoporous silica nanoparticles for near-infrared-irradiated drug release

Near-infrared (NIR) irradiation responsive drug delivery systems have many advantages, which have attracted extensive interest from researchers. In this study, a NIR-triggered drug release system was established by grafting upper critical solution temperature (UCST) polymers on the surface of hollow mesoporous silica nanoparticles (HMSNs) followed by treatment with the photothermal conversion agent indocyanine green (ICG). The as-prepared UCST polymers showed the clearing temperature of 45 °C, which were advantageous to serve as gatekeepers in the physiological environment (37 °C). Under NIR irradiation, the temperature of the solution was elevated above the clearing point due to the presence of ICG; consequently, the collapsed UCST polymer chains became more hydrophilic; this resulted in the exposure of the mesoporous channels of the HMSNs and achievement of a burst drug release. Moreover, this NIR-responsive delivery system showed good biocompatibility and high anticancer efficiency towards the MCF-7 cancer cells upon exposure to NIR irradiation. In addition, a synergistic effect of thermal and chemo treatment has been achieved by the application of NIR irradiation since cancer cells are more vulnerable to high temperatures than normal cells.