Achieving Controllable MoS2 Nanostructures with Increased Interlayer Spacing for Efficient Removal of Pb(II) from Aquatic Systems

Interlayer Space Engineering-Induced Pseudocapacitive Zinc-Ion Storage in Holey Graphene Oxide-Bearing Vertically Oriented MoS2 Nano-Wall Array Cathode for Aqueous Rechargeable Zn Metal Batteries

Transition metal dichalcogenides, particularly MoS2, are acknowledged as a promising cathode material for aqueous rechargeable zinc metal batteries (ARZMBs). Nevertheless, its lack of hydrophilicity, poor electrical conductivity, significant restacking, and restricted interlayer spacing translate into inadequate capacity and rate performance. Herein, the unique porous structure and additional functional groups present in holey graphene oxide (hGO) are taken advantage of to dictate the vertical growth pattern of oxygen-doped MoS2 nanowalls (O-MoS2/NW) over the hGO surface. Compared to conventional graphene oxide (GO), the presence of nano-pores in hGO facilitates the homogeneous dispersion of Mo precursors and provides stronger interaction sites, promoting the uniform vertical alignment of O-MoS2/NW. The synergistic interaction between O-MoS2-NW and hGO translates to enhanced electron conductivity, efficient electrolyte penetration, enhanced interlayer spacing, reduced restacking, and enhanced surface area. As a consequence of precise control of various factors that decide the overall battery performance, a high discharge capacity (227 mAh g-1 at 100 mA g-1) cathode material with significantly lower charge transfer resistance (66 Ω) compared to pristine O-MoS2 (153 Ω) is developed. These findings underscore the potential of hGO as a multifunctional platform for nanoengineering high-performance cathode materials for the next generation of efficient and durable ARZMBs.

Metallic 1T/1T' phase TMD nanosheets with enhanced chemisorption sites for ultrahigh-efficiency lead removal

Two-dimensional (2D) materials, as adsorbents, have garnered great attention in removing heavy metal ions (HMIs) from drinking water due to their extensive exposed adsorption sites. Nevertheless, there remains a paucity of experimental research to remarkably unlock their adsorption capabilities and fully elucidate their adsorption mechanisms. In this work, exceptional lead ion (Pb2+) (a common HMI) removal capacity (up to 758 mg g-1) is achieved using our synthesized metallic 1T/1T' phase 2D transition metal dichalcogenide (TMD, including MoS2, WS2, TaS2, and TiS2) nanosheets, which hold tremendous activated S chemisorption sites. The residual Pb2+ concentration can be reduced from 2 mg L-1 to 2 μg L-1 within 0.5 min, meeting the drinking water standards following World Health Organization guideline (Pb2+ concentrations <10 μg L-1). Atomic-scale characterizations and calculations based on density functional theory unveil that Pb2+ bond to the top positions of transition metal atoms in a single-atom form through the formation of S-Pb bonds. Point-of-use (POU) devices fabricated by our reported metallic phase MoS2 nanosheets exhibit treatment capacity of 55 L-water g-1-adsorbent for feed Pb2+ concentration of 1 mg L-1, which is 1-3 orders of magnitude higher than other 2D materials and commercial activated carbon.

Simultaneous decomplexation of Pb-EDTA and elimination of free Pb ions by MoS2/H2O2: Mechanisms and applications

The critical challenge of effectively removing Pb-EDTA complexes and Pb(II) ions from wastewater is pivotal for environmental remediation. This research introduces a cutting-edge bulk-MoS2/H2O2 system designed for the simultaneous decomplexation of Pb-EDTA complexes and extraction of free Pb(II) ions, streamlining the process by eliminating the need for subsequent treatment stages. The system exhibits outstanding efficiency, achieving 98.1% decomplexation of Pb-EDTA and 98.6% removal of Pb. Its effectiveness is primarily due to the generation of reactive oxygen species, notably •OH and O2•- radicals, facilitated by bulk-MoS2 and H2O2. Key operational parameters such as reagent dosages, Pb(II): EDTA molar ratios, solution pH, and the presence of coexisting ions were meticulously evaluated to determine their impact on the system's performance. Through a suite of analytical techniques, the study confirmed the disruption of Pb-O and Pb-N bonds, further elucidating the decomplexation process. It also underscored the synergistic role of bulk-MoS2's adsorption properties and the formation of PbMoO4-like precipitates in enhancing Pb elimination. Demonstrating the bulk-MoS2/H2O2 system as a robust, one-step solution that meets stringent Pb emission standards, this study provides in-depth insights into the removal mechanisms of Pb-EDTA, affirming its potential for broader application in wastewater treatment practices.

Enhancement of Peroxydisulfate Activation for Complete Degradation of Refractory Tetracycline by 3D Self-Supported MoS2/MXene Nanocomplex

Antibiotic abuse, particularly the excessive use of tetracycline (TC), a drug with significant environmental risk, has gravely harmed natural water bodies and even posed danger to human health. In this study, a three-dimensional self-supported MoS2/MXene nanohybrid with an expanded layer spacing was synthesized via a facile one-step hydrothermal method and used to activate peroxydisulfate (PDS) for the complete degradation of TC. The results showed that a stronger •OH signal was detected in the aqueous solution containing MoS2/MXene, demonstrating a superior PDS activation effect compared to MoS2 or Ti3C2TX MXene alone. Under the conditions of a catalyst dosage of 0.4 g/L, a PDS concentration of 0.4 mM, and pH = 5.0, the MoS2/MXene/PDS system was able to fully eliminate TC within one hour, which was probably due to the presence of several reactive oxygen species (ROS) (•OH, SO4•-, and O2•-) in the system. The high TC degradation efficiency could be maintained under the influence of various interfering ions and after five cycles, indicating that MoS2/MXene has good anti-interference and reusability performance. Furthermore, the possible degradation pathways were proposed by combining liquid chromatography-mass spectrometry (LC-MS) data and other findings, and the mechanism of the MoS2/MXene/PDS system on the degradation process of TC was elucidated by deducing the possible mechanism of ROS generation in the reaction process. All of these findings suggest that the MoS2/MXene composite catalyst has strong antibiotic removal capabilities with a wide range of application prospects.

Preparation and Evaluation of Phenol Formaldehyde-Montmorillonite and Its Utilization in the Adsorption of Lead Ions from Aqueous Solution

In this study, phenol formaldehyde-montmorillonite (PF-MMT) was prepared and used for lead ion (Pb2+) adsorption. Batch adsorption experiments were conducted to determine the optimal conditions. The calculated adsorption equilibrium (q) revealed that pseudo-second-order (PSO) and Langmuir isotherm models best fit the experimental data, suggesting chemisorption as the main mechanism. An adsorption capacity (qmax) of 243.9 mg/g was achieved. Fourier transform infrared (FTIR) analysis showed new peaks in PF-MMT-Pb, indicating metal complexation. Scanning electron microscopy (SEM) imaging displayed distinct Pb2+ clusters on the adsorbent surface. Adsorption was rapid, attaining equilibrium within 90 min. Effects of time, dose, concentration, and pH were systematically investigated to optimize the process. Lead ion removal efficiency reached 98.33% under optimum conditions after 90 min. The adsorption process was chemisorption based on the Dubinin-Kaganer-Radushkevich model with a free energy of 14,850 J/mol. The substantial adsorption capacity, rapid kinetics, and high removal efficiency highlight PF-MMT's potential for effective Pb2+ removal from aqueous solution.

Synthesis and characterization of green rust-deposited MoS2 composites for adsorptive removal of EDTA-chelated Ni(II) in wastewater

Ethylenediamminetetraacetatonickel(II) (EDTA-Ni(II)) has emerged as a significant soil and groundwater contaminant due to the increasing agricultural and industrial activities, posing environmental challenges. This study focuses on addressing the reactivity of green rust (GR), which can be hindered by oxidation with oxygen, limiting its effectiveness in remediation processes. To overcome this limitation and enhance the adsorptive capacities, the combination of sulfate green rust (SO4-GR) with various Fe(II)/Fe(III) ratios with a high-surface-area adsorbent, MoS2, resulting in the formation of binary composites of green rust-deposited MoS2 (MSGs) were explored. The aim was to improve the removal efficiency of EDTA-Ni(II) from contaminated wastewater. To characterize the MSGs, a comprehensive analysis using XRD, SEM, TEM, FTIR, and X-ray absorption spectroscopy was performed. The surface areas of the MSGs were smaller than that of MoS2 but larger than that of the SO4-GRs, indicating a promising composite material. XANES spectra analysis revealed that both MSGs and SO4-GRs exhibited a mixture of ferrous and ferric ions, as evident from their spectral positioning between FeO and Fe2O3. The optimal pH for efficient removal of EDTA-Ni(II) was 3, which resulted in removal efficiencies of 45.6%, 47.3%, 46.0%, and 46.2% for MSG 1, MSG 2, MSG 3, and MSG 4 after 24 h, respectively. Reducing the initial concentration of EDTA-Ni(II) to 50 mg Ni(II)/L effectively doubled the removal efficiency. Notably, as EDTA-Ni(II) was removed, an increased leaching of iron was observed, leading to a total iron concentration exceeding 40 mg/L for the composites with higher Fe(II)/Fe(III) ratios. These findings underscore the potential of MSG as a promising material for degrading EDTA-Ni(II) in contaminated wastewater, offering a viable solution to mitigate the environmental impact of this emerging contaminant. This study contributes to the understanding of green rust reactivity and provides valuable insights for developing effective strategies to address the challenges associated with EDTA-Ni(II) contamination.

Enhanced photocatalytic and SERS performance of Ag nanoparticles functionalized MoS2 nanoflakes

We report the preparation of Ag nanoparticles functionalized MoS2 nanoflakes by using the chemical reduction method followed by the hydrothermal method. Field emission scanning electron microscopy and elemental mapping reveals the uniform functionalization of Ag nanoparticles with MoS2 nanoflakes. High density of Ag plasmonic nanoparticles onto MoS2 nanoflakes demonstrates tremendously improved charge separation behavior in Ag-MoS2 nanohybrids. Photodecomposition capability of plasmonic Ag-MoS2 nanohybrids was explored by the decomposition of industrial pollutant molecules, showing a direct correlation between the Ag content over the MoS2 surface with their photodecomposition ability. The SERS-based detection profiles of the plasmonic were investigated by the ultra-low detection of MB molecules. The Ag-MoS2 nanohybrids SERS substrate manifests the detection of MB molecules solution up to a concentration of 10-9 M with an enhancement factor of 107. In the current study, we proposed and elucidated the probable efficient charge transfer mechanism for improved photocatalytic behavior and SERS-based sensing performance.

3D Porous MoS2-Decorated Reduced Graphene Oxide Aerogel as a Heterogeneous Catalyst for Reductive Transformation Reactions

The MoS2-based reduced graphene oxide aerogel (MoS2-rGOA)-assisted organic transformation reactions are presented. MoS2-rGOA is used as a heterogeneous catalyst for the reduction of benzene derivatives such as benzaldehyde, nitrobenzene, and benzonitrile to benzyl alcohol, aniline, and benzamide and their derivatives, respectively, in green solvents (water/methanol) and green reducing agents (hydrazine hydrate having N2 and H2 as byproducts). The mechanistic features of the reduction pathway, substrate scope, and the best suitable conditions by varying the temperature, solvent, reducing agent, catalyst loading, time, etc. are optimized. All of the synthesized products are obtained in quantitative yield with purity and well characterized based on nuclear magnetic resonance analysis. Further, it is also observed that our catalyst is efficiently recyclable and works well checked up to 5 cycles.

Treatment of textile wastewater using carbon-based nanomaterials as adsorbents: a review

Waste derived from the textile industry can contain a wide variety of pollutants of organic and inorganic natures, such as dyes (e.g., acid, basic, reactive, mordant dyes) and toxic metals (e.g., lead, chromium, cadmium). The presence of pollutants at high concentrations in textile waste makes them relevant sources of pollution in the environment. To solve this problem, various technologies have been developed for the removal of pollutants from these matrices. Thus, adsorption emerges as an efficient alternative for textile waste remediation, providing advantages as simplicity of operation, economy, possibility of using different adsorbent materials, and developing on-line systems that allow the reuse of the adsorbent during several adsorption/desorption cycles. This review will initially propose an introduction to the adsorption world, its fundamentals, and aspects related to kinetics, equilibrium, and thermodynamics. The possible mechanisms through which a pollutant can be retained on an adsorbent will be explained. The analytical techniques that offer valuable information to characterize the solid phases as well as each adsorbate/adsorbent system will be also commented. The most common synthesis techniques to obtain carbon nano-adsorbents have been also presented. In addition, the latest advances about the use of these adsorbents for the removal of pollutants from textile waste will be presented and discussed. The contributions reported in this manuscript demonstrated the use of highly efficient carbon-based nano-adsorbents for the removal of both organic and inorganic pollutants, reaching removal percentages from 65 to 100%.

Efficient and selective removal of Hg(II) from water using recyclable hierarchical MoS2/Fe3O4 nanocomposites

Developing practical and cost-effective adsorbents with satisfactory mercury (Hg) remediation capability is indispensable for aquatic environment safety and public health. Herein, a recyclable hierarchical MoS₂/Fe₃O₄ nanocomposite (by in-situ growth of MoS₂ nanosheets on the surface of Fe₃O₄ nanospheres) is presented for the selective removal of Hg(II) from aquatic samples. It exhibited high adsorption capacity (∼1923.5 mg g ^-1), fast kinetics (k₂ ∼ 0.56 mg g ^-1 min^-1), broad working pH range (2-11), excellent selectivity (K_d > 1.0 × 10⁷ mL g ^-1), and great reusability (removal efficiency > 90% after 20 cycles). In particular, removal efficiencies of up to ∼97% for different Hg(II) concentrations (10-1000 μg L ^-1) in natural water and industrial effluents confirmed the practicability of MoS₂/Fe₃O₄. The possible mechanism for effective Hg(II) removal was discussed by a series of characterization analyses, which was attributed to the alteration of the MoS₂ structure and the surface coordination of Hg-S. The accessibility of surface sulfur sites and the diffusion of Hg(II) in the solid-liquid system were enhanced due to the advantage of the expanded interlayer spacing (0.96 nm) and the hierarchical structure. This study suggests that MoS₂/Fe₃O₄ is a promising material for Hg(II) removal in actual scenarios and provides a feasible approach by rationally constructing hierarchical structures to promote the practical applications of MoS₂ in sustainable water treatments.

Highly Efficient Capture of Heavy Metal Ions on Amine-Functionalized Porous Polymer Gels

Porous polymer gels (PPGs) are characterized by inherent porosity, a predictable structure, and tunable functionality, which makes them promising for the heavy metal ion trap in environmental remediation. However, their real-world application is obstructed by the balance between performance and economy in material preparation. Development of an efficient and cost-effective approach to produce PPGs with task-specific functionality remains a significant challenge. Here, a two-step strategy to fabricate amine-enriched PPGs, NUT-21-TETA (NUT means Nanjing Tech University, TETA indicates triethylenetetramine), is reported for the first time. The NUT-21-TETA was synthesized through a simple nucleophilic substitution using two readily available and low-cost monomers, mesitylene and α, α′-dichloro-p-xylene, followed by the successful post-synthetic amine functionalization. The obtained NUT-21-TETA demonstrates an extremely high Pb2+ capacity from aqueous solution. The maximum Pb2+ capacity, qm, assessed by the Langmuir model was as high as 1211 mg/g, which is much higher than most benchmark adsorbents including ZIF-8 (1120 mg/g), FGO (842 mg/g), 732-CR resin (397 mg/g), Zeolite 13X (541 mg/g), and AC (58 mg/g). The NUT-21-TETA can be regenerated easily and recycled five times without a noticeable decrease of adsorption capacity. The excellent Pb2+ uptake and perfect reusability, in combination with a low synthesis cost, gives the NUT-21-TETA a strong potential for heavy metal ion removal.

Applications of functional nanoparticle-stabilized surfactant foam in petroleum-contaminated soil remediation

Surfactant foam (SF) can be used to remediate petroleum-contaminated soil because of its easy transfer to inhomogeneous and low-permeability formations. Nanoparticles (NPs) not only stabilize SF under extreme conditions but also impart various functions, aiding the removal of petroleum contaminants. This review discusses the stabilization mechanisms of nanoparticle-stabilized SF (NP-SF) as well as the effects of NP size, chargeability, wettability, and NP-to-surfactant ratio on foam stability. SF stabilized by inert SiO₂ NPs is most commonly used to remediate soil contaminated with crude oil and diesel. Low dose of SF stabilized by nano zero-valent iron is cost-effective for treating soil contaminated with chlorinated organics and heavy metal ions. The efficiency and recyclability of Al₂O₃/Fe₃O₄ NPs in the remediation of diesel and crude oil contamination could be enhanced by applying a magnetic field. This review provides a theoretical basis and practical guidelines for developing functional NP-SF to improve the remediation of petroleum-contaminated soils. Future research should focus on the structural design of photocatalytic NPs and the application of catalytic NP-SF in soil remediation.

Porous boron nitride nanofibers enhanced sodium acrylate and acrylamide copolymer hydrogels for effective adsorption of Pb2

A new composite hydrogel adsorbent for adsorption of Pb²⁺ has been prepared by combining porous boron nitride nanofibers (BNNFs) and the acrylamide and sodium acrylate copolymer (P(AANa-co-AM)) via a chemical crosslinking method. Porous BNNFs with abundant hydroxyl functional groups can form hydrogen bond interactions with carboxyl and amino functional groups of the copolymer in the composite hydrogel and carry and dissipate forces for the composite hydrogels. So the mechanical performances of the copolymer hydrogels can be effectively improved, which is very valuable for the practical application of the composite hydrogel to remove Pb²⁺ from waste water. The thermal stability and swelling performance of the pure copolymer hydrogels were also greatly improved. This is not only because of the strong hydrogen bond interactions but also the good thermal stability and flexibility of BNNFs. The composite hydrogel adsorbent shows superior adsorption capacity for Pb²⁺ (490.2 mg g^-1) to most of the reported hydrogel adsorbents. The chemisorption dominates the whole adsorption process according to the pseudo-second-order kinetic and the Langmuir models. The composite hydrogel adsorbent also shows good reusability. Therefore, we believe that the prepared composite hydrogels will play an important role in removing Pb²⁺ from wastewater.

Advanced Polymeric Nanocomposite Membranes for Water and Wastewater Treatment: A Comprehensive Review

Nanomaterials have been extensively used in polymer nanocomposite membranes due to the inclusion of unique features that enhance water and wastewater treatment performance. Compared to the pristine membranes, the incorporation of nanomodifiers not only improves membrane performance (water permeability, salt rejection, contaminant removal, selectivity), but also the intrinsic properties (hydrophilicity, porosity, antifouling properties, antimicrobial properties, mechanical, thermal, and chemical stability) of these membranes. This review focuses on applications of different types of nanomaterials: zero-dimensional (metal/metal oxide nanoparticles), one-dimensional (carbon nanotubes), two-dimensional (graphene and associated structures), and three-dimensional (zeolites and associated frameworks) nanomaterials combined with polymers towards novel polymeric nanocomposites for water and wastewater treatment applications. This review will show that combinations of nanomaterials and polymers impart enhanced features into the pristine membrane; however, the underlying issues associated with the modification processes and environmental impact of these membranes are less obvious. This review also highlights the utility of computational methods toward understanding the structural and functional properties of the membranes. Here, we highlight the fabrication methods, advantages, challenges, environmental impact, and future scope of these advanced polymeric nanocomposite membrane based systems for water and wastewater treatment applications.

Optical Absorption Investigations for efficient Crystal Violet Dye removal from wastewater via Carbon nanotubes: Montmorillonite based Nanocomposite

The current study reports a facile method to fabricate functionalized multi-walled carbon nanotubes and montmorillonite clay mineral-based nano-composite matrix and its detailed characterization using spectroscopic and morphological techniques. The nanocomposites have been studied for their potential applications in the treatment of contaminated water using batch adsorption studies. The investigations conducted using optical absorption spectroscopic measurements for the adsorption process indicate that the nanocomposite matrix can effectively remove almost 98% of the dye from aqueous solution. The nanocomposites have showed fast and strong adsorption behaviour for the dye with the maximum adsorption capacity (q_m ) of ~ 467.3 mg g^-1 in 25 min. The experimental data at equilibrium were also correlated with the theoretical adsorption isotherm and kinetic models. The results demonstrate that the experimental data fits well to the Freundlich adsorption isotherm model and conforms to second order kinetics. Furthermore, the nanocomposite exhibits good recyclability without any marked decrease in the adsorption performance even after five adsorption cycles of usage which indicates its potential application as reusable adsorbent for the efficient removal of hazardous dyes from contaminated water.

Chronic level of exposures to low-dosed MoS2 nanomaterials exhibits more toxic effects in HaCaT keratinocytes

Molybdenum disulfide nanomaterials (MoS₂ NMs) have shown significant role as photocatalysts, lubricating agents and sterilant due to their remarkable physicochemical properties. Because of the increasing demand for MoS₂ NMs in numerous industrial domains, greater occupational exposure and subsequent NMs release into environment would be unavoidable. However, much efforts have been made to uncover the biological effects of NMs at unrealistic high concentration or acute duration, placing constraints on setting the realistic occupational exposure thresholds with confidence. In order to fill the current knowledge gap, this study aimed to evaluate the nanotoxicity of MoS₂ NMs with or without surface defects under the more realistic exposure mode. Noteworthily, the artificial sweat transformed-occupational exposure-cytotoxicity investigation of MoS₂ NMs was established as the main studied line. And the high cellular internalization and augmented oxidative stress triggered by surface defect could be recognized as the main factors for triggering serious cellular damage. Moreover, the HaCaTs exhibited loss of cell membrane integrity, dysfunction of mitochondria, disorder of endoplasmic reticulum and damages of nuclei after chronic exposure, compared with acute exposure. The study provided closely realistic exposure scenarios for NMs which exhibited significant difference from acute toxic investigation, enriching understanding towards real environmental safety of NMs.

Tuning phase compositions of MoS2 nanomaterials for enhanced heavy metal removal: performance and mechanism

Two-dimensional MoS₂ nanosheets have shown great potential in heavy metal remediation due to their unique properties. MoS₂ has two primary phases: 1T and 2H. Each has different physiochemical properties, but the impact of these differences on the overall material's heavy metal removal performance and associated mechanisms is rarely reported. In this study, we synthesized morphologically similar but phase-distinct MoS₂ samples via hydrothermal synthesis, which comprised dominantly either a metallic 1T phase or a semiconducting 2H phase. 1T-MoS₂ samples exhibited higher removal capacities for Ag⁺ and Pb²⁺ cations relative to 2H-MoS₂. In particular, an eight-fold increase in the Pb²⁺ adsorption capacity was observed in the 1T-MoS₂ samples (i.e. ∼632.9 mg g^-1) compared to the 2H-MoS₂ samples (∼81.6 mg g^-1). The mechanisms driving the enhanced performance of 1T-MoS₂ were investigated through detailed characterization of metal-laden MoS₂ samples and DFT modelling. We found that 1T-MoS₂ intrinsically had a larger interlayer spacing than 2H-MoS₂ because water molecules were retained between the hydrophilic 1T nanosheets during hydrothermal synthesis. The widened interlayer spacing in 1T-MoS₂ allowed the diffusion of heavy metal ions into the nanochannels, increasing the number of adsorption sites and total removal capacities. On the other hand, DFT modelling revealed the energy-favorable adsorption complex of Ag⁺ and Pb²⁺ for 1T-MoS₂, in which each metal atom was bonded with three S atoms leading to much higher adsorption energies relative to 2H-MoS₂ for Ag⁺ and Pb²⁺. This study unravels the underlying mechanisms of phase-dependent heavy metal remediation by MoS₂ nanosheets, providing an important guide for the use of 2D nanomaterials in environmental applications which include heavy metal removal, contaminant sensing, and membrane separation.

Nanostructured Materials for Water Purification: Adsorption of Heavy Metal Ions and Organic Dyes

Chemical water pollution poses a threat to human beings and ecological systems. The purification of water to remove toxic organic and inorganic pollutants is essential for a safe society and a clean environment. Adsorption-based water treatment is considered one of the most effective and economic technologies designed to remove toxic substances. In this article, we review the recent progress in the field of nanostructured materials used for water purification, particularly those used for the adsorption of heavy metal ions and organic dyes. This review includes a range of nanostructured materials such as metal-based nanoparticles, polymer-based nanomaterials, carbon nanomaterials, bio-mass materials, and other types of nanostructured materials. Finally, the current challenges in the fields of adsorption of toxic materials using nanostructured materials are briefly discussed.

Alkynyl functionalized MoS2 mesoporous materials with superb adsorptivity for heavy metal ions

Effective elimination of heavy metal ions from water is an arduous task for their toxic effects to aquatic ecosystem and human health. Herein, a novel alkynyl functionalized molybdenum disulfide (C-MoS₂) is fabricated via mechanochemical method with well interlayered spacing, meso porosity, and high surface area (~211 m²g^-1). Mineral MoS₂ was first peeled mechanically and oxidized in situ to MoS_2-xO_x, and then reduced by ball milling with CaC₂ to form the C-MoS₂ composite. The as-obtained C-MoS₂ shows extraordinary adsorptivity for heavy metal ions, viz. 1194 mg-Hg g^-1 (Hg(NO₃)₂ solution, pH= 5, 303.15 K, equilibrium Hg(II) concentration Ce= 36.9 μg·g^-1, ionic strength I= 17.2 mmolL^-1), and 442.3 mg-Pbg^-1 (Pb(NO₃)₂ solution, pH= 5, 303.15 K, equilibrium Pb(II) concentration Ce= 46.9μgg^-1, I= 5.8 mmolL^-1), respectively, along with excellent recyclability, representing one of the best sorbents till now. The adsorption isotherms of Hg(II) followed the Langmuir model and the adsorption kinetics followed the pseudo-second-order model. The adsorption is an endothermic and entropy driven spontaneous process. The excellent adsorption performance of C-MoS₂ is attributed to its very high S-content, availability, and soft acid-base interaction with mercury and lead anions. The C-MoS₂ is an advanced sorbent for Hg(II) and Pb(II) with excellent adsorption performance and recyclability.

Chitosan-assisted MOFs dispersion via covalent bonding interaction toward highly efficient removal of heavy metal ions from wastewater

Metal organic frameworks (MOFs) have been considered to be robust adsorbent for the removing heavy metal ions from wastewater due to their unique properties such as large active sites, high specific surface area and high porosity, etc., however, their practical engineering application faces the problem of serious agglomeration. In this work, a new strategy of chitosan (CS) assisting MOF dispersion was proposed to develop the new generation of MOF-based adsorbents, namely, CS grafted UiO-66-NH₂ composite materials (CGUNCM). The UiO-66-NH₂ was selected and it was grafted onto the main chains of CS through covalent bonding interaction with the aid of glutaraldehyde, which was totally different from the common method that grafting molecular chains on the surface of MOFs resulting in the dramatic reduction of active adsorption sites. The results show that grafting MOFs onto CS main chains not only greatly improves the dispersion of MOFs but also reserves the morphology of MOFs as much as possible. The adsorption performances toward Cu(II) and Pb(II) were intensively studied by varying adsorbate concentration, ionic strength, the contact time, adsorption temperature and pH value of solution. The results show that the composite adsorbent exhibits high adsorption efficiency and the adsorption equilibrium can be reached within 45 min, and the maximum adsorption capacity toward Cu(II) and Pb(II) achieve 364.96 mg/g and 555.56 mg/g, respectively. Furthermore, the composite adsorbent shows good reusability. This work provides a new method of fabricating the MOF-based adsorbent and paves the way for the practical application of such adsorbents in wastewater treatment.

Removal and degradation of mixed dye pollutants by integrated adsorption-photocatalysis technique using 2-D MoS2/TiO2 nanocomposite

Two-dimensional (2D) Molybdenum disulfide (MoS₂) has become one of the most exciting areas of research for adsorbents due to its high surface area and abundant active sites. Mainly, 2D MoS₂ show promising removal of textile dye pollutants by adsorption process, but it show high affinity for anionic type of dyes, that limits its performance in mixed dye pollutants treatment. Herein, we demonstrate an integrated approach to remove mixed dye pollutants (anionic and cationic) concurrently by combining adsorption and photocatalysis process. We synthesize MoS₂/TiO₂ nanocomposites for different weight percentages 2.5, 5, 10, 20, 30 and 50 wt% of pre-synthesized flower-like MoS₂ nanoparticle by a two-step hydrothermal method. We demonstrate a new process of two-stage adsorption/photocatalysis using high wt% of MoS₂ (Stage-I) and low wt% of MoS₂ (Stage-II) nanocomposites. The proposed two-stage integrated adsorption and photocatalysis process using 50% and 2.5% of MoS₂ coated TiO₂, respectively showed complete removal of methylene blue dye ∼5 times faster than conventional single-stage (adsorption or photocatalysis) water treatment process. Furthermore, the feasibility of the proposed two-stage method in mixed dye pollutants removal (anionic and cationic) testified, which showed excellent performance even in doubling the dye pollutant concentration. This work brings a deeper insight into understanding the morphology and concentration of 2-D MoS₂ in MoS₂/TiO₂ nanocomposite in tackling mixed dye pollutants and the possibilities of applying in textile dyeing industries wastewater treatment plants.

Bismuth Molybdate Nanoplates Supported on Reduced Graphene Oxide: An Effective Nanocomposite for the Removal of Naphthalene via Adsorption-Photodegradation

Polycyclic aromatic hydrocarbons are a class of persistent organic water pollutants that raise serious concerns owing to their carcinogenicity and other negative impacts on humans and ecosystems. In this study, Bi2MoO6/reduced graphene oxide (rGO) nanocomposites were designed and prepared for the adsorption-assisted photodegradation of naphthalene molecules in an aqueous medium. The synthesized Bi2MoO6 nanoplates and Bi2MoO6/rGO nanocomposites were characterized by X-ray diffraction, Fourier transform infrared, scanning electron microscopy, high-resolution transmission microscopy, X-ray photoelectron spectroscopy, ultraviolet spectroscopy, Brunauer-Emmett-Teller, and photoluminescence measurements. The photodegradation of naphthalene molecules was observed to assess the photocatalytic characteristics of the samples under visible light. The Bi2MoO6/rGO nanocomposites exhibited significantly improved photocatalytic efficiency compared to pure Bi2MoO6. Among the nanocomposites, those containing 2 wt % rGO showed the best photocatalytic activity. The incorporation of rGO enhanced the visible light absorption and decreased the recombination rate of photogenerated charge carriers. Moreover, a Bi2MoO6/rGO nanocomposite showed excellent reusability for five cycles.

Facile preparation of MoS2@Kaolin composite by one-step hydrothermal method for efficient removal of Pb(II)

MoS₂@Kaolin was prepared by facile one-step hydrothermal method for the efficient adsorption of Pb(II) from aqueous solution. XRD, TG, SEM, BET, XPS and FTIR were used to characterize the phase and structure of composite before and after the adsorption of Pb(II). The results showed that MoS₂ nanosheets were successfully assembled on kaolinite surface to form MoS₂@Kaolin, and the adsorption capacity of the MoS₂@Kaolin is 1.74 and 16.95 times than that of single MoS₂ and kaolinite, respectively. MoS₂@Kaolin composite exhibited a fast adsorption rate for Pb(II) and an excellent adsorption efficiency for Pb(II) in a wide pH range (2-5.5). The adsorption process followed the Langmuir isotherm model and maximum adsorption capacity was 280.39 mg/g. The adsorption kinetics of MoS₂@Kaolin composite to Pb(II) fitted well with the pseudo-second-order kinetics models, which showed that the adsorption process was controlled by chemical sorption. MoS₂@Kaolin showed excellent regeneration and maintained high selectivity adsorption with co-existence metal ions. The adsorption mechanism was that the Pb(II) reacted with the S atoms on surface of MoS₂@Kaolin under oxidation conditions provided by molybdenum disulfide to form the insoluble compound β-Pb₃O₂SO₄ in aqueous solution. MoS₂@Kaolin was an adsorbent for Pb(II) in aqueous solution with excellent adsorption properties and application potential.

Nanocellulosics: Benign, Sustainable, and Ubiquitous Biomaterials for Water Remediation

Water is critical for all lives to thrive. Access to potable and safe water has been argued to rank top among the prerequisites for defining the standard of living of a nation. However, there is a global decline in water quality due to human activities and other factors that severely impact freshwater resources such as saltwater intrusion and natural disasters. It has been pointed out that the millions of liters of industrial and domestic wastewater generated globally have the potential to help mitigate water scarcity if it is appropriately captured and remediated. Among the many initiatives to increase access to clean water, the scientific community has focused on wastewater remediation through the utilization of bioderived materials, such as nanocellulosics. Nanocellulosics, derived from cellulose, have the advantages of being ubiquitous, nontoxic, and excellent adsorbents. Furthermore, the surface properties of nanocellulosic materials can easily be modified. These advantages make them promising materials for water remediation applications. This perspective highlights the most important new developments in the application of nanocellulosics in water treatment technologies, such as membrane, adsorption, sensors, and flocculants/coagulants. We also identify where further work is urgently required for the widespread industrial application of nanocellulosics in wastewater treatment.

One-pot synthesis of N-doped carbon intercalated molybdenum disulfide nanohybrid for enhanced adsorption of tetracycline from aqueous solutions

Nitrogen-doped carbon intercalated molybdenum disulfide nanohybrid (NC-MoS₂) with well-interconnected nanosheets was successfully fabricated using a one-pot hydrothermal method and applied as a novel adsorbent to remove tetracycline (TC) from aqueous solutions. Series material characterizations indicated that the intercalation of nitrogen-doped carbon into MoS₂ nanosheets could produce widened interlayer spacing, enlarge the specific surface area and create more extensive functional groups. The adsorption kinetics and isotherms investigations revealed that the pseudo-second-order model and Langmuir isotherm model could fit well the TC adsorption behavior of NC-MoS₂. Particularly, NC-MoS₂ possessed a high maximum adsorption capacity (1128.4 mg/g) that was approximately 2.8 times that of pristine MoS₂ (409.84 mg/g) at 308 K and pH = 6.0 ± 0.1. Furthermore, the relevant thermodynamic parameters indicated that the adsorption process was spontaneous and endothermic. The adsorption process was dependent on multiple interactions including hydrophobicity, π-π stacking interaction and hydrogen bond. These findings demonstrated that NC-MoS₂ had potential applications for treating TC-containing water and broadened the application of metal sulfides in the environmental field.

Superselective Removal of Lead from Water by Two-Dimensional MoS2 Nanosheets and Layer-Stacked Membranes

Point-of-use (POU) devices with satisfactory lead (Pb²⁺) removal performance are urgently needed in response to recent outbreaks of lead contamination in drinking water. This study experimentally demonstrated the excellent lead removal capability of two-dimensional (2D) MoS₂ nanosheets in aqueous form and as part of a layer-stacked membrane. Among all materials ever reported in the literature, MoS₂ nanosheets exhibit the highest adsorption capacity (740 mg/g), and the strongest selectivity/affinity toward Pb²⁺ with a distribution coefficient K_d that is orders of magnitude higher than that of other lead adsorption materials (5.2 × 10⁷ mL/g). Density functional theory (DFT) simulation was performed to complement experimental measurements and to help understand the adsorption mechanisms. The results confirmed that the cation selectivity of MoS₂ follows the order Pb²⁺ > Cu²⁺ ≫ Cd²⁺ > Zn²⁺, Ni²⁺ > Mg²⁺, K⁺, Ca²⁺. The membrane formed with layer-stacked MoS₂ nanosheets exhibited a high water flux (145 L/m²/h/bar), while effectively decreasing Pb²⁺ concentration in drinking water from a few mg/L to less than 10 μg/L. The removal capacity of the MoS₂ membrane is a few orders of magnitude higher than that of other literature-reported membrane filters. Therefore, the layer-stacked MoS₂ membrane has great potential for POU removal of lead from drinking water.

Properties and adsorption mechanism of magnetic biochar modified with molybdenum disulfide for cadmium in aqueous solution

In this paper, we present the preparation of MoS₂-modified magnetic biochar (MoS₂@MBC) as a novel adsorbent by a simple hydrothermal method. MoS₂@MBC contains abundant S-containing functional groups that facilitate efficient Cd(II) removal from aqueous systems. We employed various characterization techniques to explore the morphology, surface area, and chemical composition of MoS₂@MBC; these included Brunauer-Emmett-Teller analysis scanning electron microscopy, Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, and X-ray diffraction,. The results indicated the successful decoration of the surface of MoS₂@MBC with iron and MoS₂, and a higher surface area of MoS₂@MBC than that of unmodified biochar. Moreover, adsorption properties including thermodynamics and kinetics were investigated along with the effects of pH, humic acid, and ionic strength on the Cd(II) adsorption onto MoS₂@MBC. The O-, C-, S-, and Fe-containing functional groups on the surface of MoS₂@MBC led to an electrostatic attraction of Cd(II) and strong Cd-S complexation. The Langmuir and pseudo second-order models fitted best for the batch adsorption experiments results. The adsorption capacity of MoS₂@MBC (139 mg g^-1 on the basis of the Langmuir model) was 7.81 times higher than that of pristine biochar. The adsorption process was found to be pH-dependent. The experimental results indicated that MoS₂@MBC is an effective adsorbent for removing Cd(II) from water solutions. Further, the adsorption process involved the complexation of Cd(II) with oxygen-based functional groups, ion exchange, electrostatic attraction, Cd(II)-π interactions, metal-sulfur complexation, and inner-surface complexation. This work provides new insights into the Cd(II) ions removal from water via adsorption. It also demonstrates that MoS₂@MBC is an efficient and economic adsorbent to treat Cd(II)-contaminated water.

New amino group functionalized porous carbon for strong chelation ability towards toxic heavy metals

Herein, ethylenediamine functionalized porous carbon (PC-ED/1.5) was synthesized, then characterized by various methods and finally used as a functional material for Cu(ii) and Pb(ii) ion removal from water. XPS revealed the presence of numerous functionalities within the surface of PC including -NH and C-N-C groups. Furthermore, S BET, RS, XRD and FTIR analyses confirmed the changes implemented on the PC surface. Thereafter, a systematic study was implemented to analyze the interactions of the PC-ED/1.5 surface with Cu(ii) and Pb(ii) heavy metal ions. Hence, adsorption experiments showed that the PC-ED/1.5 exhibits maximum adsorption capacities of 123.45 mg g-1 and 140.84 mg g-1 for Cu(ii) and Pb(ii), respectively. Moreover, in situ electrostatic interactions occurring between the divalent cation and the PC-ED/1.5 functional groups was investigated. The mechanism involves chelation processes, electrostatic interactions and mechanical trapping of the metal ions in the adsorbent pores. Interestingly, a synergistic effect of the pores and surface active sites was observed. Finally, by using alginate bio-polymer we prepared membrane films of PC-ED/1.5 which showed long-term stability, regeneration capabilities and high mass recovery.

Ultrasensitive detection of cadmium ions using a microcantilever-based piezoresistive sensor for groundwater

This paper proposes the selective and ultrasensitive detection of Cd(II) ions using a cysteamine-functionalized microcantilever-based sensor with cross-linked ᴅʟ-glyceraldehyde (DL-GC). The detection time for various laboratory-based techniques is generally 12-24 hours. The experiments were performed to create self-assembled monolayers (SAMs) of cysteamine cross-linked with ᴅʟ-glyceraldehyde on the microcantilever surface to selectively capture the targeted Cd(II). The proposed portable microfluidic platform is able to achieve the detection in 20-23 min with a limit of detection (LOD) of 0.56 ng (2.78 pM), which perfectly describes its excellent performance over other reported techniques. Many researchers used nanoparticle-based sensors for the detection of heavy metal ions, but daily increasing usage and commercialization of nanoparticles are rapidly expanding their deleterious effect on human health and the environment. The proposed technique uses a blend of thin-film and microcantilever (micro-electromechanical systems) technology, which mitigate the disadvantages of the nanoparticle approaches, for the selective detection of Cd(II) with a LOD below the WHO limit of 3 μg/L.

Multi-edged molybdenite achieved by thermal modification for enhancing Pb(II) adsorption in aqueous solutions

Thermal modification was simply performed on molybdenite to enhance the adsorption of Pb(II) in aqueous solutions, and the root of this phenomenon was well studied in this work. Various thermal modification temperatures at 300 °C, 400 °C and 500 °C were applied to modify the surface property of molybdenite, producing different degrees of edge defect and surface wettability in molybdenite samples. Contact angle tests, atomic force microscopy (AFM) observations and adsorption tests illustrated that molybdenite thermally modified at 400 °C contained most edge defects and achieved a 147.846 mg/g Pb(II) adsorption, which was almost 10 times of that obtained by natural molybdenite. The adsorption experiment also indicated that the increase of surface hydrophilia of molybdenite would slightly benefit the Pb(II) adsorption. The X-ray photoelectron spectroscope (XPS) exhibited that a strong chemical adsorption existed between Pb(II) and S elements. AFM study further demonstrated that the interaction between Pb(II) and S atoms exposed at the triangular edges of molybdenite were the intrinsic reason for the great enhancement of Pb(II) adsorption. This work provides a new insight to absorb Pb(II) in aqueous solutions using natural molybdenite.

Highly Efficient Separation of Anionic Organic Pollutants from Water via Construction of Functional Cationic Metal-Organic Frameworks and Mechanistic Study

Organic anions possess various functional properties; however, their presence in wastewater causes environmental pollution. Thus, coupling the separation of such species with the resultant function could be highly desirable. Herein, we propose a "killing two birds with one stone" strategy for highly efficient separation of organic pollutant anions from water at room temperature through direct construction of functional cationic metal-organic frameworks (CMOFs) based on the organic anions as charge-balancing anions. To illustrate this strategy, 2,4,6-trinitrophenolate anion (PA^-) is chosen as a typical anion, while 4,4'-azo-triazole (atrz) is strategically chosen as a suitable neutral ligand. The resultant positive framework exhibits a high adsorption capacity and selectivity for PA^-. Remarkably, its adsorption capacity is 869.6 mg g^-1, which is more than 30 times that of multiwalled carbon nanotubes and 15 times that of activated carbon. Its capacity is even higher than that of BUT-13 (865 mg g^-1), the highest adsorbent ever known. ¹H NMR and single-crystal X-ray diffraction show that the high capacity is attributed to strong electrostatic interaction between the positive framework and PA^-, which leads to all the pores being completely occupied by PA^- anions. ¹H NMR titration reveals that the selectivity comes from stronger hydrogen-bonding interaction between the ligand of the positive framework and PA^-, which is confirmed from the eight times length of the shifted signal of atrz due to the addition of PA^- compared with the competing anions. The stronger interaction is further confirmed from the high stability of the resultant CMOF in high-concentration salt solutions containing the competing anions, particularly in 100-fold molar NaNO₃ and Na₂SO₄ solutions. Meanwhile, first-principles simulation shows that the high binding energy between the positive framework and PA^- contributes to enhancing the selectivity. Moreover, the resultant CMOF is a potential energetic material with an improved oxygen balance, high heat of formation, and heat of detonation.

Nacre-inspired hydroxyapatite/chitosan layered composites effectively remove lead ions in continuous-flow wastewater

Design and fabrication of novel adsorbents to remove heavy metal ions in continuous-flow wastewater remained a great challenge. Inspired by the hierarchical architecture and biomineralization process of nacre, we firstly constructed hydroxyapatite/chitosan (HA/CH) layered composites. The brick-and-mortar characteristics of HA/CH layered composites improved their flexure strengths up to 3.08 MPa so that the hierarchical architectures could not be destroyed even under high-pressure drop. HA/CH layered composites had the hierarchical microstructures analogous to plate towers, facilitating the separation of adsorbents from water. The interlaminar macropores in the layered composites contributed to the transfer of continuous-flow wastewater. The Pb(II), Cd(II) and Hg(II) ions in wastewater showed similar adsorption trends, and their adsorption amounts arrived at 295.96, 192.37 and 127.38 mg g^-1 after 6 days, respectively. Among the above heavy metal ions, the HA/CH layered composites possessed the best Pb(II) adsorption ability due to forming lead hydroxyapatite rods and CH-Pb complexes. The Pb(II) adsorption performances of HA/CH layered composites matched well with Elovich equation, pseudo-first-order and pseudo-second-order kinetics models, revealing the heterogeneous chemisorption mechanism at adsorbent/wastewater interfaces. Therefore, the nacre-like HA/CH layered composites with appropriate mechanical property and excellent adsorption capacity are a novel platform for heavy metal removal in continuous-flow wastewater.

Free-standing SiO2/TiO2–MoS2 composite nanofibrous membranes as nanoadsorbents for efficient Pb(ii) removal

The practical utility of a hybrid material based on flexible free-standing ceramic nanofibers functionalized with MoS₂ for heavy metal removal.

Remediation of mercury contaminated soil, water, and air: A review of emerging materials and innovative technologies

Mercury contamination in soil, water and air is associated with potential toxicity to humans and ecosystems. Industrial activities such as coal combustion have led to increased mercury (Hg) concentrations in different environmental media. This review critically evaluates recent developments in technological approaches for the remediation of Hg contaminated soil, water and air, with a focus on emerging materials and innovative technologies. Extensive research on various nanomaterials, such as carbon nanotubes (CNTs), nanosheets and magnetic nanocomposites, for mercury removal are investigated. This paper also examines other emerging materials and their characteristics, including graphene, biochar, metal organic frameworks (MOFs), covalent organic frameworks (COFs), layered double hydroxides (LDHs) as well as other materials such as clay minerals and manganese oxides. Based on approaches including adsorption/desorption, oxidation/reduction and stabilization/containment, the performances of innovative technologies with the aid of these materials were examined. In addition, technologies involving organisms, such as phytoremediation, algae-based mercury removal, microbial reduction and constructed wetlands, were also reviewed, and the role of organisms, especially microorganisms, in these techniques are illustrated.

Efficient Removal of Pb(II) and Cd(II) from Industrial Mine Water by a Hierarchical MoS2/SH-MWCNT Nanocomposite

In this study, we investigate the adsorption capability of molybdenum sulfide (MoS₂)/thiol-functionalized multiwalled carbon nanotube (SH-MWCNT) nanocomposite for rapid and efficient removal of heavy metals [Pb(II) and Cd(II)] from industrial mine water. The MoS₂/SH-MWCNT nanocomposite was synthesized by acid treatment and sulfurization of MWCNTs followed by a facile hydrothermal reaction technique using sodium molybdate and diethyldithiocarbamate as MoS₂ precursors. Morphological and chemical features of the nanocomposite material were studied using various characterization techniques. Furthermore, the effects of adsorbent (MoS₂/SH-MWCNT nanocomposite) concentration, contact time, initial concentration of heavy-metal ions, and reaction temperature were examined to determine the efficiency of the adsorption process in batch adsorption experiments. Kinetics and isotherm studies showed that the adsorption process followed pseudo-second-order and Freundlich adsorption isotherm models, respectively. Thermodynamic parameters calculated using van't Hoff plots show the spontaneity and endothermic nature of adsorption. MoS₂/SH-MWCNT nanocomposite demonstrates a high adsorption capacity for Pb(II) (90.0 mg g^-1) and Cd(II) (66.6 mg g^-1) following ion-exchange and electrostatic interactions. Metal-sulfur complex formation was identified as the key contributor for adsorption of heavy-metal ions followed by electrostatic interactions for multilayer adsorption. Transformation of adsorbent into PbMoO_4-x S _x and CdMoO_4-x S _x complex because of the adsorption process was confirmed by X-ray diffraction and scanning electron microscopy-energy-dispersive spectrometry. The spent adsorbent can further be used for photocatalytic and electrochemical applications; therefore, the generated secondary byproducts can also be employed for other purposes.